Scribd
Upload
116 views5 pages

PHT2508CF

This document provides information on a thyristor module rated for 250A and 800V. It features an isolated base, single thyristor design, and high surge capability. It is UL recognized. Typical applications include rectification for general use. Key specifications include average and peak current and voltage ratings, thermal characteristics, and mounting details.

Uploaded by

Arnulfo Muñoz Frausto
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
116 views5 pages

PHT2508CF

This document provides information on a thyristor module rated for 250A and 800V. It features an isolated base, single thyristor design, and high surge capability. It is UL recognized. Typical applications include rectification for general use. Key specifications include average and peak current and voltage ratings, thermal characteristics, and mounting details.

Uploaded by

Arnulfo Muñoz Frausto
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

THYRISTOR MODULE PHT2508

250A / 800V
OUTLINE DRAWING

FEATURES
* Isolated Base
* Single Thyristor Module
* High Surge Capability
* UL Recognized, File No. E187184

TYPICAL APPLICATIONS
* Rectified For General Use

Maximum Ratings Approx Net Weight:250g

Grade
Parameter Symbol Unit
PHT2508

IIIC.CC
Repetitive Peak Off-State Voltage VDRM 800
V
Non Repetitive Peak Off-State Voltage VDSM 900
Repetitive Peak Reverse Voltage VRRM 800
V
Non Repetitive Peak Reverse Voltage VRSM 900

Parameter Conditions
Max Rated
Value Unit
50Hz Half Sine Wave condition
Average Rectified Output Current IO(AV) 250 A
Tc=65°C
RMS On-State Current IT(RMS) 390 A
50 Hz Half Sine Wave, 1Pulse
Surge On-State Current ITSM 4000 A
Non-Repetitive
I Squared t I2t 2msec to 10msec 80000 A2s
VD=2/3VDRM, ITM=2 IO, Tj=125°C
•

Critical Rate of Turned-On Current di/dt 100 A/µs


IG=300mA, diG/dt=0.2A/µs
Peak Gate Power PGM 5 W
Average Gate Power PG(AV) 1 W
Peak Gate Current IGM 2 A
Peak Gate Voltage VGM 10 V
Peak Gate Reverse Voltage VRGM 5 V
Operating JunctionTemperature Range Tjw -40 to +125 °C
Storage Temperature Range Tstg -40 to +125 °C
Isoration Voltage Viso Base Plate to Terminals, AC1min 2000 V
Case mounting M5 Screw 2.4 to 2.8
Mounting torque Ftor N•m
Terminals M5 Screw 2.4 to 2.8

http://store.iiic.cc/
Electrical • Thermal Characteristics
Maximum Value.
Characteristics Symbol Test Conditions Unit
Min. Typ. Max.
Peak Off-State Current IDM VDM= VDRM, Tj= 125°C 80 mA
Peak Reverse Current IRM VRM= VRRM, Tj= 125°C 80 mA
Peak Forward Voltage VTM ITM= 800A, Tj=25°C 1.38 V
Tj=-40°C 300
Gate Current to Trigger IGT VD=6V,IT=1A Tj=25°C 150 mA
Tj=125°C 80
Tj=-40°C 5
Gate Voltage to Trigger VGT VD=6V,IT=1A Tj=25°C 3 V
Tj=125°C 2
Gate Non-Trigger Voltage VGD VD=2/3VDRM Tj=125°C 0.25 V
Critical Rate of Rise of Off-State
dv/dt VD=2/3VDRM Tj=125°C 500 V/µs
Voltage
ITM=IO,VD=2/3VDRM
Turn-Off Time tq dv/dt=20V/µs, VR=100V 200 µs
-di/dt=20A/µs, Tj=125°C
Turn-On Time tgt 6 µs
VD=2/3VDRM Tj=125°C
Delay Time td 2 µs
IG=300mA, diG/dt=0.2A/µs
Rise Time tr 4 µs
Latching Current IL Tj=25°C 150 mA
Holding Current IH Tj=25°C 100
Rth(j-c) Junction to Case 0.18
Thermal Resistance Base Plate to Heat Sink °C/W
Rth(c-f) 0.1
with Thermal Compound

http://store.iiic.cc/
PHT2508 OUTLINE DRAWING (Dimensions in mm)

http://store.iiic.cc/
http://store.iiic.cc/
http://store.iiic.cc/

You might also like