Scribd
Upload
471 views2 pages

2013 SDC-6 Machine Specifications

Hockin Diversified Holdings manufactures the patented Sonic Dry Clean System (SDC), an air filter cleaning machine. The 2013 model SDC-6 can clean cartridge air filters from 8 to 40 inches tall with outside diameters from 3.5 to 20 inches. It uses compressed air, vacuum, vibration and rotation to automatically clean filters in under five minutes. The machine is designed for continuous duty operation and has over 850 systems in use worldwide. It requires a 220 volt power supply and compressed air source. Standard features include all welded steel construction, stainless steel components, computer controls and safety interlocks.

Uploaded by

Carlos Ediver Arias Restrepo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
471 views2 pages

2013 SDC-6 Machine Specifications

Hockin Diversified Holdings manufactures the patented Sonic Dry Clean System (SDC), an air filter cleaning machine. The 2013 model SDC-6 can clean cartridge air filters from 8 to 40 inches tall with outside diameters from 3.5 to 20 inches. It uses compressed air, vacuum, vibration and rotation to automatically clean filters in under five minutes. The machine is designed for continuous duty operation and has over 850 systems in use worldwide. It requires a 220 volt power supply and compressed air source. Standard features include all welded steel construction, stainless steel components, computer controls and safety interlocks.

Uploaded by

Carlos Ediver Arias Restrepo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Hockin Diversified Holdings, Inc.

Manufacturer of the Patented Sonic Dry Clean System

2013 Model SDC–6 Air Filter Dry Cleaning Machine


Specificaiton

Cartridge Air Filter Cleaning Dimensions:


• Standard Maximum Outside Diameter is a 20”OD Cartridge Filter.
• Standard Minimum Inside Diameter is 3.5” ID Cartridge Filter.
• Standard Maximum Height is 32” tall Cartridge Filter.
• Standard Minimum Height is 8” tall Cartridge Filter

Cartridge Air Filter Cleaning Machine Options:


• 20ft Sea Container Build Installation
• Optional Maximum Height is 40” tall cartridge

Patented SDC Cartridge Air Filter Cleaning Process Specifications:


• Fully Automatic Dry Cleaning Process
• Integrated Color Touchscreen for full control of cleaning process and increased productivity
• Uses computerized sequences of compressed air, vacuum, vibration and rotation
• Automatically adjusts to cartridge air filters height and diameter
• Average Dirty Air Filter Cleaned in less than five minutes!
• Cleans both Inside and Outside Dirty Filters!!
• 8-10 cleanings or more on average per cartridge air filter using SDC Process! Synthetic
Based Media Cartridge Air Filters can be cleaned even more!
• Fully Adjustable Cleaning Cycle Time to fit customer specific application
• Designed for Continues Duty Rate Operation (24hr, 7days, 56 weeks per year)
• Average 85,000 filter cleaning service life
• Over 850 SDC Systems in use Worldwide!

Power & Air Requirements

Electrical:
• 220 volt, Single Phase, 50/60 hertz 10 amps electrical service
• L6-30 Receptacle Supplied with Machine
Compressed Air:
• 125 psi @ 150 cfm constant clean dry compressed air.
• ¾” inlet pipe
NOTE: Recommended Air Compressor is a 40-hp screw compressor, with outputs at 125 psi @ 150
cfm constant with a 200 gallon receiver tank.

Sonic Dry Clean


Division of Hockin Diversified Holdings, Inc.
1672 Main St. Suite E, PMB 362• Ramona, CA 92065 USA
800/732-4622 760/787-0510 760/787-0513 fax • www.sonicdryclean.com •
[email protected]
 Page 2 January 7, 2013

SDC Machine Standard Features

Cleaning Cabinet Frame Construction and Internal Drive Components:


• Meets all OSHA, MSHA, UL, NEC, NFPA general safety guidelines
• All Electrical Enclosure are Nema 12 Rated
• All Pneumatic Components Supplied by Parker
• Mitsubishi PLC
• Mitsubishi Color Touchscreen
• AC Motor Drive
• EAO Modular Switches
• Integrated Fully Reset able Fused Breakers
• All welded steel frame construction
• All Exterior Walls Covered in Machine Grade Stainless Steel
• Grade 5 & Grade 8 Hardware Used Throughout Assembly
• All interior and exterior components are either powder coat painted or Black Oxide Treated
• Entire Frame Powder Coat Painted
• Tough Lexan Safety Window
• Teflon Bushings
• Phos-Bronze Bearings
• Stainless Steel Air Cylinders
• Hardened Chain Drives
• All Wear Surfaces Case Hardened or Hard Chromed
• Hardened Steel Guides
• Brass Air Tips
• Interchange Nozzle Heads
• Sealed Roller Bearings
• Computer Controlled Electronics
• AC Motor Drives
• Quick Disconnect High Pressure Brass Air Fittings
• Long Life Electric Motors
• Easy to Understand Controls
• Off the Shelf Available Replacement Parts

Safety Features:
• Locking Lower Compartment Doors
• Locking Control Panel Enclosure
• Safety Interlock Switches on Top and Bottom Access Doors
• Easy Access Emergency Stop Switch
• Nema 12 Electrical Enclosure
• CE Mark

Sonic Dry Clean


Division of Hockin Diversified Holdings, Inc.
1672 Main St. Suite E, PMB 362• Ramona, CA 92065 USA
800/732-4622 760/787-0510 760/787-0513 fax • www.sonicdryclean.com •
[email protected]

You might also like