Scribd Logo
Upload

Welcome to Scribd!

  • 66 views

    Regulated DC Power Supplies: Features

    Uploaded by

    nachcratch
    The document describes several regulated DC power supply models for stepper and servo drives, including the RPS2410, RPS369, RPS488, and RPS608. The supplies have features like internal EMI filtering, full load burn-in testing, and overcurrent/voltage protection. They provide outputs of 24V, 36V, 48V and 60V at power levels from 240W to 500W while regulating voltage within ±0.5% and adjusting output within ±10%. The supplies have overvoltage and overcurrent protection and operate from 85-265VAC input power at 47-63Hz.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Regulated DC Power Supplies: Features

    Uploaded by

    nachcratch
    66 views3 pages
    The document describes several regulated DC power supply models for stepper and servo drives, including the RPS2410, RPS369, RPS488, and RPS608. The supplies have features like internal EMI filtering, full load burn-in testing, and overcurrent/voltage protection. They provide outputs of 24V, 36V, 48V and 60V at power levels from 240W to 500W while regulating voltage within ±0.5% and adjusting output within ±10%. The supplies have overvoltage and overcurrent protection and operate from 85-265VAC input power at 47-63Hz.

    Original Title

    Regulated_Power_Supplies_V0.0.1

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document describes several regulated DC power supply models for stepper and servo drives, including the RPS2410, RPS369, RPS488, and RPS608. The supplies have features like internal EMI filtering, full load burn-in testing, and overcurrent/voltage protection. They provide outputs of 24V, 36V, 48V and 60V at power levels from 240W to 500W while regulating voltage within ±0.5% and adjusting output within ±10%. The supplies have overvoltage and overcurrent protection and operate from 85-265VAC input power at 47-63Hz.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    66 views3 pages

    Regulated DC Power Supplies: Features

    Uploaded by

    nachcratch
    The document describes several regulated DC power supply models for stepper and servo drives, including the RPS2410, RPS369, RPS488, and RPS608. The supplies have features like internal EMI filtering, full load burn-in testing, and overcurrent/voltage protection. They provide outputs of 24V, 36V, 48V and 60V at power levels from 240W to 500W while regulating voltage within ±0.5% and adjusting output within ±10%. The supplies have overvoltage and overcurrent protection and operate from 85-265VAC input power at 47-63Hz.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 3

    Regulated DC Power Supplies for Stepper & Servo Drive

    Regulated DC Power Supplies

    RPS2410 RPS369, RPS488 RPS608 (-L)

    Features
    n Specifically designed to power stepping / servo drives
    n Internal EMI Filter
    n 100% full load burn-in test
    n Output short circuit, over-current and over-voltage protection

    Electrical Specifications
    RPS608
    Model RPS2410 RPS369 RPS488
    (RPS608-L)
    DC VOLTAGE 24V 36V 48V 60V
    RATED CURRENT 10A 9.7A 7.3 A 8.5A
    PEAK CURRENT 12A 11A 8.5A 10.5A
    RATED POWER 240W 350W 350W 400W
    OUTPUT PEAK POWER 300W 400W 400W 500W
    LINE REGULATION ± 0.5%
    ADJ. RANGE ± 10%
    RISE TIME 50ms/230VAC at full load
    HOLD TIME 20ms/230VAC at full load
    176-265VAC or 85-132VAC, 176-265VAC
    VOLTAGE RANGE
    selected by switch (85-132VAC )
    FREQUENCY RANGE 47-63Hz
    INPUT INRUSH CURRENT 40A/30VAC, Cold Start
    LEAKAGE CURRENT <0.5mA/230VAC
    WITHSTAND
    Vin~Vout: 1500VAC/min, Vin~FG: 1500VAC/min, Vout~FG: 500VAC/min
    VOLTAGE
    N/A 59-66V 71-79V 95-105V
    OVER VOLTAGE
    Protection Type: Output shunt down, need to turn off the input to reset.
    PROTECTION
    110%-130% 110%-130% 110%-130% 110%-130%
    OVER LOAD
    Protection Type: Output shunt down, need to turn off the input to reset.

    DIMENSION (mm) 199*110*50 214.5*113.6*49.5 261*102.4*65

    WEIGHT 800.4g (28.23oz) 883.5g (31.16oz) 1127g (39.75oz)

    Tel: (86)755-26409254 Email: [email protected] Web site: www.leadshine.com


    Regulated DC Power Supplies for Stepper & Servo Drive

    Operating Environment and Parameters

    Cooling Natural cooling or forced cooling


    Environment Avoid dust, oil fog and corrosive gases

    Operating Environment Working Temperature 0℃－ 45℃ @100%

    Humidity 20 － 90%RH

    Storage Temperature -20℃ － 85℃

    Mechanical specifications (unit=mm, 1 inch = 25.4 mm)

    Figure 1: RPS2410(-L) Mechanical Specification Figure 2: RPS369 and RPS488 Mechanical Specification

    Figure 3: RPS608(-L) Mechanical Specification

    Pin Assignment and Description


    L
    AC power input
    N

    Ground terminal. Recommend connect this port to the ground for better safety.

    COM DC output negative


    +V DC output positive
    Tel: (86)755-26409254 Email: [email protected] Web site: www.leadshine.com
    Regulated DC Power Supplies for Stepper & Servo Drive

    Order Information
    Model Description
    RPS2410 240W, 24VDC regulated switching power supply. Input: 85-132VAC or 176-265VAC
    RPS369 350W, 36VDC regulated switching power supply. Input: 85-132VAC or 176-265VAC
    RPS488 350W, 48VDC regulated switching power supply. Input: 85-132VAC or 176-265VAC
    RPS608 500W, 60VDC regulated switching power supply. Input:176-265VAC
    RPS608-L 500W, 60VDC regulated switching power supply. Input: 85-132VAC

    Tel: (86)755-26409254 Email: [email protected] Web site: www.leadshine.com

    You might also like