Scribd
Upload
137 views1 page

Casing and Tubing Length Range

Casing and Tubing length Range

Uploaded by

Quality controller
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
137 views1 page

Casing and Tubing Length Range

Casing and Tubing length Range

Uploaded by

Quality controller
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
You are on page 1/ 1
STD-API/PETRO SPEC SCT-ENGL 1998 MM 0732290 0633542 27] mm 26 [API SPECIFICATION SCT ‘Table 25—Dimensions and Weights for Plain-End Liners— Group 1 (Grade J55 Only) o @ ® @ © Designation ‘Ourside ‘wall Task —_ Pe ____ Diameter, Thickness, Diameter, Size ‘Weight Gn) Ga) Gn) 3, 351 330 02899 4 134 4.000 0.286 3.428 1308 4500 0.250 3920 1793 5.000 0362 476 1981 3.00 0361 arm 2155 625 oar? Table 26—Range Lengths ‘Range I (fet) Range 2 (feet) Range 3 (feet) Casing and Liners ‘Range length, minimum 160 250 340 ‘Range length, maximom 250 340 480 ‘Range length for 95 percent or more of carload: ‘Permissible variation within the range length, maximum 60 50 60 Permissible length, minimum 180 280 360 ‘Tubing ‘Range length, minionum 200 280 = Range lenge, maximom 240 320 = Range lengt for 100 percent of carload: Permissible variation within the range length, maximum 20 20 = Pup Joints Lengtb*—2,3, 4, 6,8, 10, and 12 feet ‘Tolerance—23 inches ‘Carlo tolerances shal not apply to order items ofles than 40,000 pounds of pipe. For any carload of 40,000 pounds or more of pipe thats shipped tothe final destination without transferor removal from the car, the tolerance shall apply to each ca. For ‘any order item consisting of 40,000 pounds or more of pipe that is shipped from the manufacturers facility by rail, but nt to the final destination, the cried tolerances shall apply tothe overall quantity of pipe shipped onthe order item, but not tothe individual carloads. “By agreement between the purchaser and the manufacturer, th total range length for Range 1 tubing may be 20-28 fot. Twe-foot pup joints may be furnished up to 3feet-long by agreement between the purchaser and the manufacturer, and lengths other than thse listed may be furnished by agreement between the purchaser and the manufacturer. COPYRIGHT 2090 Aner Information Hand roleum Institute es, 2000

You might also like