Scribd
Upload
41 views2 pages

Revision Test October - 2018 Reg. No.:: PART A (10X2 20 Marks)

This document provides a summary of a fluid mechanics revision test containing multiple choice and long answer questions. The test has 3 parts: Part A contains 10 multiple choice questions worth 2 marks each; Part B contains 5 long answer questions worth 13 marks each; and Part C contains 1 long answer question worth 15 marks. Questions cover topics like uniform and non-uniform flow, streamlines, compressible and incompressible flow, loss of head, boundary layers, Bernoulli's equation, and the Navier-Stokes equations. Students are asked to derive equations and solve problems related to pipe flow, parallel pipes, and boundary layer development.

Uploaded by

Venkatram Prabhu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
41 views2 pages

Revision Test October - 2018 Reg. No.:: PART A (10X2 20 Marks)

This document provides a summary of a fluid mechanics revision test containing multiple choice and long answer questions. The test has 3 parts: Part A contains 10 multiple choice questions worth 2 marks each; Part B contains 5 long answer questions worth 13 marks each; and Part C contains 1 long answer question worth 15 marks. Questions cover topics like uniform and non-uniform flow, streamlines, compressible and incompressible flow, loss of head, boundary layers, Bernoulli's equation, and the Navier-Stokes equations. Students are asked to derive equations and solve problems related to pipe flow, parallel pipes, and boundary layer development.

Uploaded by

Venkatram Prabhu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

Revision Test October - 2018 Reg. No.

Programme : BE Date : 06.10.2018


Branch : Civil Engineering Time : 1.30P.M -4.30 P.M
Semester : 03 Duration : 3Hrs
Subject code : CE 8302
Maximum : 100 Marks
Subject Name : Fluid Mechanics

PART A (10X2=20 Marks)


1 What are the difference between uniform and non uniform flows?
2 Distinguish beteen streamline and streak line.
3 Define compressible flow and incompressible flow.
4 Write down the expression for loss of head due to sudden enlargement of the pipe.
5 Write down the expression for loss of head at the entrance of the pipe.
6 What is meant by Moody’s chart?
7 Define Boundary Layer.
8 What are the boundary layer thickness?
9 What is meant by energy thickness?
1 What are the assumptions made in the analysis of boundary layer development?
0
PART B (5x13= 65 Marks)
1 a) Derive Bernoulli’s equation for the flow of an incompressible friction less (13)
fluid from consideration of momentum.
1
(or)
b) The stream function for a two dimensional flow is given by φ =8xy, (13)
calculate the velocity at the point (4,5). Find the velocity potential function
at the point (5,4).
1 a) Explain in detail about the (13)
2 (i)Steady flow & uniform flow
(ii)Laminar flow & Turbulent flow
(iii)Rotational flow & irrotational flow
(iv)One, two, three dimensional flow
(or)
b) The difference in water surface levels in two tanks which are connected by (13)
three pipes in series of lengths 300m, 170m, 210m, and diameters are
300mm, 200mm, and 400mm respectively is 10m. Determine the rate of
flow of water if co-efficient of friction is 0.005, 0.0052, & 0.0048
1
respectively. Considering (i) minor losses (ii) neglecting minor losses etc.

1 a) Explain in detail notes on pipe in series and pipe in parallel in fluid flow. (13)
3
(or)
b) The main pipe divides into two parallel pipes which again forms one pipe (13)
as shown in fig. The length and diameter for the first parallel pipe are 2000
m and 1.0m respectively, while the length and diameter of 2 nd parallel pipe
are 2000m and 0.8m Find the rate of flow in each parallel pipe, if total
flow in the main is 5m3/s. The co-efficient of friction for each parallel pipe
is same and equal to 0.005.

1 a) Derive an Expression for Momentum Integral Equation for boundary (13)


Layer.
4
(or)
b) A flat plate 1.5 m x1.5 m moves at 50 km/ hour in stationary air of density (13)
1.15 kg/m3.If the coefficient of Drag and lift are 0.15 and 0.75
respectively.Determine the lift force,drag force,resultant force and the
power require to keep the Plate in motion.
1 a) Derive an Expression for the Momentum thickness in boundary layer with (13)
the necessary assumptions.
5
(or)
b) Find the displacement thickness and the momentum thickness for the (13)
velocity distribution in the boundary layer given by u/U =2 (y/ δ )-(y/ δ )2.

PART C (1x15=15 Marks)

1 Derive an Expression for the displacement thickness in boundary layer (15)


with the necessary assumptions.
6

FacultyIncharge HOD Dean Principal

You might also like