Scribd
Upload
56 views1 page

Machine Model WT3G

The document describes the WT3G machine model, which is a generator/converter model for Type-3 (double-fed) wind turbines, and details how it implements high voltage reactive current management and low voltage active current management to control the reactive and active currents based on measured voltage levels and enforce voltage limits. The model uses equations to calculate reactive current based on voltage measurements and network solutions to maintain high voltage levels, while active current is regulated based on measured voltage to control low voltages.

Uploaded by

Manuel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
56 views1 page

Machine Model WT3G

The document describes the WT3G machine model, which is a generator/converter model for Type-3 (double-fed) wind turbines, and details how it implements high voltage reactive current management and low voltage active current management to control the reactive and active currents based on measured voltage levels and enforce voltage limits. The model uses equations to calculate reactive current based on voltage measurements and network solutions to maintain high voltage levels, while active current is regulated based on measured voltage to control low voltages.

Uploaded by

Manuel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Machine Model WT3G

Generator/converter Model for Type-3 (Double-Fed) Wind Turbines WT3G

High Voltage Reactive Current Management


−1 𝐼𝐼𝑄𝑄
1
𝐸𝐸𝑄𝑄𝑄𝑄𝑄𝑄𝑄𝑄 ∑
1 + 𝑠𝑠𝑇𝑇𝑑𝑑 1 𝐿𝐿𝐿𝐿𝐿𝐿 + Norton
+
𝐼𝐼𝑞𝑞𝑞𝑞𝑞𝑞𝑞𝑞𝑞𝑞𝑞𝑞 Equivalent
Interface to
WT3E 𝐼𝐼𝑞𝑞𝑞𝑞𝑞𝑞𝑞𝑞𝑞𝑞𝑞𝑞 is calculated in network equations network
Model if LPVLSW = 0 then ignore this limit solution to enforce high voltage limit equations
LVPL 𝑉𝑉𝑇𝑇 ≤ 𝑉𝑉𝑉𝑉𝑉𝑉𝑉𝑉
𝑗𝑗𝐼𝐼𝑟𝑟𝑟𝑟𝑟𝑟𝑟𝑟
Rup
1 𝐼𝐼𝑃𝑃 + jLpp
𝐼𝐼𝑃𝑃𝑃𝑃𝑃𝑃𝑃𝑃+ ∑ 𝐼𝐼𝑟𝑟𝑟𝑟𝑟𝑟𝑟𝑟
_ 𝑠𝑠𝑇𝑇𝑑𝑑 2
Rdown 1

VT π
Lvpnt0 Lvpnt1

Lvpl1 Low Voltage Active Current Management


1
1 + 𝑠𝑠𝑇𝑇𝐿𝐿𝐿𝐿𝐿𝐿𝐿𝐿 VT
V 3
xerox brkpt States:
1 – Eq
Implementation of the rrpwr Rate Limit (Changed 10/21/2019) 2 – Ip
The parameter rrpwr represents an absolute value rate limit. It applies in the
direction of the present sign of Ip. Thus it can be written as follows
3 – Vmeas
If Ip >= 0 then Rup = +rrpwr Else Rup = +Infinity
If Ip <= 0 then Rdown = -rrpwr Else Rdown = -Infinity

Model supported by PSLF

You might also like