Scribd
Upload
259 views1 page

Machine Model REGC - A

Model REGC_A is a renewable energy generator/converter that manages reactive current to enforce high and low voltage limits. It implements rate limits on reactive current that become active when the reactive power generation exceeds or falls below zero. It also implements low voltage active current management through a proportional-integral controller to regulate the voltage. The model divides the reactive current by the integral state variable and includes it as a term in the Norton equivalent interface to the network equations.

Uploaded by

Manuel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
259 views1 page

Machine Model REGC - A

Model REGC_A is a renewable energy generator/converter that manages reactive current to enforce high and low voltage limits. It implements rate limits on reactive current that become active when the reactive power generation exceeds or falls below zero. It also implements low voltage active current management through a proportional-integral controller to regulate the voltage. The model divides the reactive current by the integral state variable and includes it as a term in the Norton equivalent interface to the network equations.

Uploaded by

Manuel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Machine Model REGC_A

Model REGC_A
Renewable Energy Generator/Converter

Rate limits on reactive current for recovery after fault.


Upward limit is active when Q gen0 > 0 If 𝑋𝑋𝑒𝑒 > 0.0001 then
Q gen0 Iqrmax Downward limit is active Qgen0 < 0 • divide 𝐼𝐼𝑄𝑄 by 𝑋𝑋𝑒𝑒
• Include 𝑗𝑗𝑋𝑋𝑒𝑒 term in
High Voltage Reactive Current Management network interface
1 1 𝐼𝐼𝑄𝑄
𝐼𝐼𝑄𝑄𝑄𝑄𝑄𝑄𝑄𝑄 −1 ∑
1 + 𝑠𝑠𝑇𝑇𝑔𝑔 1 𝑋𝑋𝑒𝑒 + Norton
+
𝐼𝐼𝑞𝑞𝑞𝑞𝑞𝑞𝑞𝑞𝑞𝑞𝑞𝑞 Equivalent
Iqrmin Interface to
REEC_ 𝐼𝐼𝑞𝑞𝑞𝑞𝑞𝑞𝑞𝑞𝑞𝑞𝑞𝑞 is calculated in network equations network
Model if LPVLSW = 0 then ignore this limit solution to enforce high voltage limit equations
LVPL 𝑉𝑉𝑇𝑇 ≤ 𝑉𝑉𝑉𝑉𝑉𝑉𝑉𝑉
𝑗𝑗𝐼𝐼𝑟𝑟𝑟𝑟𝑟𝑟𝑟𝑟
Rup
1 𝐼𝐼𝑃𝑃 +
𝑗𝑗𝑋𝑋𝑒𝑒
𝐼𝐼𝑃𝑃𝑃𝑃𝑃𝑃𝑃𝑃+ ∑ 𝐼𝐼𝑟𝑟𝑟𝑟𝑟𝑟𝑟𝑟
_ 𝑠𝑠𝑇𝑇𝑔𝑔 2
Rdown 1

VT π
Lvpnt0 Lvpnt1

Lvpl1 Low Voltage Active Current Management


1
1 + 𝑠𝑠𝑇𝑇𝑓𝑓𝑓𝑓𝑓𝑓𝑓𝑓 VT
V 3
xerox brkpt States:
1 – Iq
Implementation of the rrpwr Rate Limit (Changed 10/21/2019)
The parameter rrpwr represents an absolute value rate limit. It applies in the 2 – Ip
direction of the present sign of Ip. Thus it can be written as follows 3 – Vmeas
If Ip >= 0 then Rup = +rrpwr Else Rup = +Infinity
If Ip <= 0 then Rdown = -rrpwr Else Rdown = -Infinity

You might also like