Conveyo (CVO) : LED Conveyor Belt Light
Conveyo (CVO) : LED Conveyor Belt Light
Conveyo (CVO) : LED Conveyor Belt Light
Dimensions
4.38 in (111 mm)
0.28 in (7 mm)
Specifications Compliances
Construction Marine grade, cast aluminum housing
UL/cUL Listed to:
Finish Gray polyester powder coat • UL 1598 Suitable for Wet Locations
Hardware Marine grade 316 stainless steel • UL 1598A Marine Outside Type (Saltwater)
• UL 844 Hazardous Location
UV- and impact-resistant PMMA Class I, Division 2 Groups A, B, C, D
Lens Type II optic Class II, Division 2 Groups F, G
Full cutoff, zero uplight Class III
Osram or Cree light emitting diodes (LED), up to 6500 lumens • CSA C22.2 No. 250.0
CCT 5000K • CSA C22.2 No. 137
Osram or Cree warm white LED option (WW), up to 5800 lumens
CE
Light source International Dark Sky Association approved (WW options)
CCT 3000K
IP63 rated (wall mount)
50W
IP65 rated (pole mount)
50,000 hour rated life
NEMA 4X (MAR option only)
120-277V, 50-60Hz
Fully potted
Power source Replaceable
Overload, over-voltage, over-temperature and short-circuit
protection
Power factor >.9 at 120V
Stranded wire leads
Water-tight grommet - standard
Wiring
Water-tight cord grip (MAR)
Water-tight conduit hub (HAZ)
Ambient operating
-40°C to +50°C
temperature
Wall or pole mount capable
Mounting
Accommodates NPS 1.25 inch (1.66 inch OD)/DN 32 mm (42 mm OD)
Fixture weight 4.0 lb (1.8 kg)
Warranty 3 year
Ordering Information
Example: CVO-48LED
Special Projects: We may be able to accommodate your special projects, so please don’t hesitate to ask about additional options.
Minimum order quantities and/or extended lead times will apply. Contact your Phoenix representative with specific inquiries.
Adjustable Tenon Mount Kit One Inch Adaptor Bracket Photocell Receptacle Kit
CVO-TN-MNT-ADJ Adjustable in 5˚ increments CVO-AB1 CVO-PCR
Accommodates NPS 1.00 inch pipe (1.32 inch Note: When installed, fixture will be IP63 rated;
OD)/DN 25 mm (34 mm OD), NPS 1.25 inch not suitable for use with HAZ or MAR options
pipe (1.66 inch OD)/DN 32 mm (42 mm OD),
NPS 1.50 inch pipe (1.90 inch OD)/DN 40 mm
(48 mm OD) and NPS 2.00 inch pipe (2.38 inch
OD)/DN 50 mm (60 mm OD)
Lens Kits
CVO-LNS-100 (100° lens kit)
Note: Contact factory for additional optic options
Cover photo: Conveyo fixture illuminating conveyor belt at an asphalt plant. Product design and specifications are subject to change without notice. The most current
version of this specification sheet can be found on our website: www.phoenixlighting.com.
Phoenix Lighting 8711 West Port Avenue Milwaukee, WI 53224 USA N5499970J
Phone: +1 414.973.3300 Toll Free: 800.438.1214 Fax: +1 414.973.3210 www.phoenixlighting.com 02.16.21