0% found this document useful (0 votes)
344 views

Microbit Block Programming Step Counter CF

This document provides step-by-step instructions for creating a step counter program using micro:bit block coding. The program uses a variable to store the step count, and increments the variable by 1 each time the micro:bit is shaken. It then displays the current step count on the micro:bit LED screen. The completed program is downloaded and transferred to the micro:bit device to be run independently of the computer.

Uploaded by

api-329048260
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
344 views

Microbit Block Programming Step Counter CF

This document provides step-by-step instructions for creating a step counter program using micro:bit block coding. The program uses a variable to store the step count, and increments the variable by 1 each time the micro:bit is shaken. It then displays the current step count on the micro:bit LED screen. The completed program is downloaded and transferred to the micro:bit device to be run independently of the computer.

Uploaded by

api-329048260
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 7

Micro:bit Block Programming: Step Counter

1
2
Step 3: Get rid of the forever block.

Step 4: Create a variable by selecting and clicking

FYI: Variables are used in programs to store information that can change. In this
activity, it’s steps.

Step 5: Type the word steps in the box and


click ok.

Step 6: Find the [ ].

Step 7: Grab the block, drag and drop inside the [ ].

Your code should look like this:

3
Step 8: Now, let’s make something happen when we shake our micro:bit. So, find
the [ ] block from the input tab.

Step 9: Grab the block, drag and drop the block to the right of the on start block
in your workspace.

Your code should look like this:

Step 10: Locate the [ ] under the variables tab.

Step 11: Grab the block, drag and drop inside the [ ] block.

FYI: This will change the value of the steps variable by 1 every time the micro:bit
is shaken.

Your code should look like this:

4
Step 12: Find the [ ] block from the basic tab.

Step 13: Grab the block, drag and drop below [ ] block.

FYI: This will show the number on the LED display.

Your code should look like this:

Step 14: Find the [ ] variable under .

Step 15: Grab the block, drag and drop [ ]

HERE!!!

Your code should look like this:

Step 16: Continuously move the mouse pointer around on the simulator as if you are
shaking it. What happens?

FYI: You should see numbers appear on the LED display.

5
Let’s Download the Code

Step 17: In the box that says Untitled, rename the file “Step Counter.” Then
Download.

Step 18: Show File in Folder.

 The file will display in your Downloads folder as a hex file. Locate the
downloaded .hex file.

6
Step 19: Connect the micro:bit to your computer with a USB cable. The microUSB
port is on top of the micro:bit.

Step 20: Drag the .hex file from the Downloads folder to the MICROBIT drive.

The code is now downloaded to your micro:bit!

To use the micro:bit away from your computer, disconnect the micro:bit from the
USB cable and connect the battery pack.

You might also like