Scribd
Upload
608 views

Making Cable Omron PLC Programming Cable

Omron PLCs are commonly used in industrial automation. This document provides instructions for making a low-cost RS232 cable to program older Omron PLC models by connecting them to a computer. It explains that a COM-DB9 male and female connector are needed along with wiring according to a diagram showing which pins to solder together. With this homemade cable, users can program their Omron PLCs via an RS232 port in a cost-effective way.

Uploaded by

The Manh
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
608 views

Making Cable Omron PLC Programming Cable

Omron PLCs are commonly used in industrial automation. This document provides instructions for making a low-cost RS232 cable to program older Omron PLC models by connecting them to a computer. It explains that a COM-DB9 male and female connector are needed along with wiring according to a diagram showing which pins to solder together. With this homemade cable, users can program their Omron PLCs via an RS232 port in a cost-effective way.

Uploaded by

The Manh
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

[Making Cable] Omron PLC Programming Cable

plc247.com/making-cable-omron-plc-programming-cable/

plc247.com November 5, 2020

PLC Omron together with Siemens is one of the most popular PLC brands in the world.
With some old Omron PLCs we can connect to them via RS232 port for programming

And today plc247.com would like to share with you how to make Omron PLC
programming cable via RS232 port very easy and cost-effective.

Preparation

1. Jack port COM-DB9 Male (Connect to the RS232 port of the PLC)

2. Jack port COM-DB9 Female (Connect to a computer)

1/3
MARKING CABLE

You conduct cable welding according to the following diagram

Pay attention to properly solder the connecting pins in the diagram, plc247.com tested
this cable and works stably

Please share the article with the community if it helps

2/3
Thanks and best regards!

3/3

You might also like