Lombardyne Multiple Effect Evaporator

LOMBARDYNE
I N D U S T R I E S
Steam Free MVR Vacuum Evaporators
Electrocoagulation Plants
Centrifugal Dryers
About Company
Lombardyne Industries was founded in 2001
We manufacture both standard models as well as customized

capacity of Vacuum Evaporators, Electro coagulation Plants
and Dryers.
We have clients pertaining from various industries such as

Pharmaceuticals, Chemicals, Textiles & Dyes, Agro and
Automotive Industries
We have clients and dealers in six countries.
We have TWO manufacturing units with latest generation

fabrication machines.
We have technically sound, highly skilled & experienced work

force numbering to 40+
We have supplied more than 100 evaporators around the

globe.
Latest trending Technology of Heat Pump concept used in all

evaporators which avoids the need for a steam boiler or any
other external heat source.
MVR technology concept incorporated in all evaporators

which result in lower running cost.
Our evaporators have higher concentration levels compared

to conventional technology.
Our Electro coagulation plants are completely skid Mounted

plug and play units.
All our Electro coagulation Plants are Automatic function

type.
Our own proprietary designs incorporated in Electro

coagulation units enables customers for easy replacement of
Anodic / Cathodic Plates.
Our Patented designs involve collaboration of Vacuum

Evaporator Technology with Electro coagulation Technology.
Together they treat raw effluent having TDS, COD, BOD,
TSS.
Vacuum Evaporators / Electrocoagulation Plants / Dryers

Evaporator
Section
Below is a basic differentiation table between a conventional MEE and a Lombardyne Vacuum Evaporator
SR NO CONVENTIONAL EVAPORATOR LOMBARDYNE VACUUM EVAPORATOR
1 HIGH CAPITAL COST LOWER CAPITAL COST
2 HIGH RUNNING COST LOW RUNNING COST

(Rs. 0.80/- to 1.2/- per Ltr ) (Rs. 0.40/- per Ltr )
3 STEAM REQUIRED NO STEAM REQUIRED
4 NO HEAT RECOVERY SYSTEM HEAT RECOVERY SYSTEM INCLUDED
5 HIGH CHOKING FREQUENCY NO CHOKING
6 FREQUENT FOULING LESS FREQUENT FOULING
7 ERECTION AT SITE NO ERECTION AT SITE REQUIRED

LARGE SPACE REQUIRED SKID MOUNTED UNIT
8 OLD AGE TECHNOLOGY CALANDRIA USED FOR EVAPORATION NEW AGE TECHNOLOGY EVAPORATOR EMPTY VESSEL USED
9 SEMI AUTOMATIC FULLY AUTOMATIC

AUTO CONCENTRATE DISCHARGE
AUTO DISTILLED WATER DISCHARGE
AUTO EFFLUENT INTAKE
AUTO CLEANING CYCLE
10 STEAM BOILER NEEDED RUNS ON ELECTRICITY ONLY
11 CONCENTRATE OUTPUT MAX CONCENTRATE CONVERT TO SLURRY

30% ( 3,00,000 TDS ) UPTO 50% ( 5,00,000 TDS )
Key Features
Ÿ Inbuilt Heat Pump for Effluent Heating
Ÿ Steam free Operation
Ÿ No choking.
Ÿ Skid Mounted Unit
Ÿ Calandria Free
Ÿ Inbuilt Concentrator unit

Evaporator
Section
ESSENTIAL ADVANTAGES
Steam Free
Heat Pump technology is incorporated for higher energy savings. The
generated heat by the Heat Pump is almost 4 times of the electrical
energy consumed by the Heat Pump. ( 1:4 Ratio )
Due to this, Lombardyne evaporator running cost is 60% less
comapred to a conventional MEE.
Unlike conventional MEE, Lombardyne Evaporators are designed for

Low Boiling Point Evaporation. This results in much
higher condensate quality in single stage evaporation.
Inbuilt Concentrator Unit Slurry form output
Conventional Evaporators have a maximum limit of concentration level

of approximately 30% solids.
Lombardyne has implemented Concentrator technology in all the
evaporators which result in higher levels of concentration of
approximately 55% to 70%.
These specially designed concentrators keep concentrating the effluent
inside the evaporator until the concentrate become a thick slurry.
This results in smaller capacity of dryer to be used.
In case of ATFD, the running cost can be reduced drastically.
Skid Mounted Unit Plug & Play

All Lombardyne Evaporators are Skid
mounted units and are ready for plug and
play at site.
Unlike conventional evaporators where a lot

of site fabrication is needed along with huge
space, Lombardyne evaporators take up
very less space. With the help of a simple
fabrication setup, the unit can be placed and
immediatley commissioned.
Evaporator
Section
TECHNICAL DETAILS
MODEL INPUT EFFLUENT EFFLUENT CONDENSATE CONCENTRATE DIMENSIONS WEIGHT
NO LOAD INPUT INPUT FLOW RATE OUTPUT TDS (mm) kgs
/ KW/HR FLOW TDS (LPH)
CAPACITY RATE RANGE
(LPH)
500 LPH 31 500 1500 - 470 450000 - 3800 L X 6800

130000 600000 1500 W x
2200 H
1000 LPH 63 1000 1500 - 930 450000 - 4900 L X 10500
130000 600000 1800W x
2200H
1500 LPH 96 1500 1500 - 1390 450000 - 6000 L X 14000
130000 600000 1800W x
2200H
2000 LPH 125 2000 1500 - 1850 450000 - 6500 L X 18500
130000 600000 2400W x
2800H
3000 LPH 189 3000 1500 - 2800 450000 - 8000 L X 24000
130000 600000 3000W x
3000H
5000 LPH 315 5000 1500 - 4300 450000 - 9500 L X 38000
130000 600000 3300W x
3600H
All above models are inbuilt with Heat Pumps, MVR technology.
All above models are Fully automatic function: Auto Effluent Feed, Auto Condensate Discharge, Auto Concentrate Drain.
All above models are included with Concentrator Unit.
All above models are 3 Phase, Electrical source only. No external Heat source required.
All above models are Skid Mounted Ready for installation and commissioning.
Boiling Vessel can be in SS316L / Duplex 2205. Easy

Access through Man-hole and Sight Glass.
Boiling Vessel equipped with Level Sensors, Concentration

Monitoring Sensor and Temperature Sensors.
Heat Pump designed for Low temperature Boiling point with

clearer condensate quality.
Automatic Effluent inlet port, Automatic Concentrate

Discharge port.
Automatic CIP cycle port.

Automatic Touchscreen PLC with Communication Port
Electrocoagulation
Section
ELECTRO
COAGULATION UNITS
Our Electrocoagulation units are designed according to the characteristics of the effluent.
Design parameters change with change in effluent characteristics
Our Units are designed for reducing COD, BOD and TSS upto 90%
Our units are easier to operate than conventional plants as complete system is automated.
Electrode replacement in our units are more convenient than conventional designs and can
be done within an hour.
Electrodes installed in our units have longer life upto 100 days.
Our units are skid mounted with plug and play at site readiness.
Our skids are fully loaded with Clarifier, Sludge drain and Effluent auto feed.
Provides a larger surface area in a small compact design. This allows a simpler design and
uses lower amperage requirements per cell than standard plate EC units.
Much lower operating cost. Our design uses very low voltages, providing big savings to the
customer.
Electrocoagulation
Section
TECHNOLOGY COMPARISON
FEATURES Filtration
Filtration technology requires a high particle size for it to work. It is
limited to only certain types of contaminants. COD . Dye Colour
cannot be treated by filtration method.
If free oils and greases are present it will cause high maintenance
cost on filters.
Biological Treatments
This type of technology treats oil and grease relatively well but does
not treat suspended solids or heavy metals.
It also requires careful pH adjustments to keep the bacteria alive. It
can therefore be high maintenance.
Chemical Treatment (Chemical Coagulation)

This technology can treat heavy metals but requires very strict
control of pH. Most of the time chemical treatment methods
increase the TSS (total suspended solids) and produce large volumes
of sludge with high bound water content. This is because the
electrical double layer formed by chemicals is not as strong and
pronounced as when
formed by electrocoagulation. Therefore chemical coagulation is
usually slow to filter and difficult to dewater because the floc
contains more water.
Electrocoagulation
This technology uses the same mechanism as chemical coagulation
but the characteristics of the floc are dramatically different than the
floc formed by chemical coagulation. The floc produced by
Electrocoagulation contains less bound water, and is easier to filter
because is more shear resistant. In addition, Electrocoagulation is
able to treat oil and greases with ease, reduce TSS COD and BOD.
ELECTRODE MATERIAL OPTIONS: ALUMINUM / STAINLESS STEEL / MILD STEEL / IRON
CAPACITY: 500 LPH TO 10000 LPH
MODES: MANUAL / SEMI AUTOMATIC / AUTOMATIC

LOMBARDYNE
I N D U S T R I E S
FACTORY :
123/1, LANE NO 10, RAMTEKADI INDUSTRIAL ESTATE, HADAPSAR, PUNE 411028,
MAHARASHTRA, INDIA
TEL NO: +91 9890920943, +91 8007939376, +91 8605656970
EMAIL: [email protected],
[email protected], [email protected]
WEBSITE: WWW.LOMBARDYNE-EVAPORATOR.COM

Lombardyne Multiple Effect Evaporator

Uploaded by

Copyright:

Available Formats

Lombardyne Multiple Effect Evaporator

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Lombardyne Multiple Effect Evaporator

Uploaded by

Copyright:

Available Formats

LOMBARDYNE

Steam Free MVR Vacuum Evaporators

We manufacture both standard models as well as customized

We have clients pertaining from various industries such as

We have clients and dealers in six countries.

We have TWO manufacturing units with latest generation

We have technically sound, highly skilled & experienced work

We have supplied more than 100 evaporators around the

Latest trending Technology of Heat Pump concept used in all

MVR technology concept incorporated in all evaporators

Our evaporators have higher concentration levels compared

Our Electro coagulation plants are completely skid Mounted

All our Electro coagulation Plants are Automatic function

Our own proprietary designs incorporated in Electro

Our Patented designs involve collaboration of Vacuum

Vacuum Evaporators / Electrocoagulation Plants / Dryers

SR NO CONVENTIONAL EVAPORATOR LOMBARDYNE VACUUM EVAPORATOR

1 HIGH CAPITAL COST LOWER CAPITAL COST

2 HIGH RUNNING COST LOW RUNNING COST

3 STEAM REQUIRED NO STEAM REQUIRED

4 NO HEAT RECOVERY SYSTEM HEAT RECOVERY SYSTEM INCLUDED

5 HIGH CHOKING FREQUENCY NO CHOKING

6 FREQUENT FOULING LESS FREQUENT FOULING

7 ERECTION AT SITE NO ERECTION AT SITE REQUIRED

9 SEMI AUTOMATIC FULLY AUTOMATIC

10 STEAM BOILER NEEDED RUNS ON ELECTRICITY ONLY

11 CONCENTRATE OUTPUT MAX CONCENTRATE CONVERT TO SLURRY

Ÿ Steam free Operation

Ÿ Skid Mounted Unit

Ÿ Inbuilt Concentrator unit

Unlike conventional MEE, Lombardyne Evaporators are designed for

Inbuilt Concentrator Unit Slurry form output

Conventional Evaporators have a maximum limit of concentration level

Skid Mounted Unit Plug & Play

Unlike conventional evaporators where a lot

500 LPH 31 500 1500 - 470 450000 - 3800 L X 6800

Boiling Vessel can be in SS316L / Duplex 2205. Easy

Boiling Vessel equipped with Level Sensors, Concentration

Heat Pump designed for Low temperature Boiling point with

Automatic Eﬄuent inlet port, Automatic Concentrate

Automatic CIP cycle port.

Chemical Treatment (Chemical Coagulation)

ELECTRODE MATERIAL OPTIONS: ALUMINUM / STAINLESS STEEL / MILD STEEL / IRON

CAPACITY: 500 LPH TO 10000 LPH

MODES: MANUAL / SEMI AUTOMATIC / AUTOMATIC

You might also like