Scribd
Upload
645 views2 pages

Dxxx-690-960/1695-2690/1695-2690-65/65/65-16I/18I/18I-M/M/M-R Easyret 6-Port Antenna With 3 Integrated Rcus - 2.0M Model: Atr4518R6V06

This document summarizes the specifications of an EasyRET 6-Port antenna with 3 integrated RCUs (Remote Control Units). It has a frequency range of 690-960 MHz and 1695-2690 MHz with vertically and horizontally polarized beams. Key features include a gain between 15.5-18.3 dBi, wind survival up to 250 km/h, and integrated RETs for remote control with AISG and 3GPP protocols.

Uploaded by

Дмитрий Спиридонов
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
645 views2 pages

Dxxx-690-960/1695-2690/1695-2690-65/65/65-16I/18I/18I-M/M/M-R Easyret 6-Port Antenna With 3 Integrated Rcus - 2.0M Model: Atr4518R6V06

This document summarizes the specifications of an EasyRET 6-Port antenna with 3 integrated RCUs (Remote Control Units). It has a frequency range of 690-960 MHz and 1695-2690 MHz with vertically and horizontally polarized beams. Key features include a gain between 15.5-18.3 dBi, wind survival up to 250 km/h, and integrated RETs for remote control with AISG and 3GPP protocols.

Uploaded by

Дмитрий Спиридонов
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

DXXX-690-960/1695-2690/1695-2690-65/65/65-16i/18i/18i-M/M/M-R

EasyRET 6-Port Antenna with 3 Integrated RCUs - 2.0m


Model: ATR4518R6v06

Antenna Specifications

Electrical Properties
690 - 960 2 x (1695 - 2690)
Frequency range (MHz) 1695 - 1920 - 2200 - 2490 -
690 - 803 790 - 862 824 - 894 880 - 960
1990 2200 2490 2690
Polarization +45° , -45°
0 - 10 , continuously adjustable , each band
Electrical downtilt (°) 0 - 10 , continuously adjustable
separately
at mid Tilt 15.5 15.9 16.0 16.1 17.1 17.5 17.8 18.3
Gain (dBi)

1LnH Band
4-10 Ports
over all Tilts 15.5 ±0.5 15.8 ±0.5 15.8 ±0.5 16.0 ±0.6 17.1 ±0.5 17.5 ±0.4 17.8 ±0.5 18.2 ±0.4
Side lobe suppression for first
> 18 > 18 > 18 > 18 > 19 > 19 > 19 > 19
side lobe above main beam (dB)
Horizontal 3dB beam width (°) 65 ±1.7 65 ±1.4 65 ±1.7 65 ±2.4 65 ±4.3 64 ±3.2 63 ±4.4 62 ±4.1

Vertical 3dB beam width (°) 10.3 ±0.7 9.5 ±0.5 9.2 ±0.6 8.6 ±0.5 7.1 ±0.5 6.5 ±0.5 5.8 ±0.4 5.3 ±0.2

VSWR < 1.5


Cross polar isolation (dB) ≥ 28
Interband isolation (dB) ≥ 30
Front to back ratio , ±30° (dB) > 25 > 25 > 25 > 25 > 25 > 27 > 26 > 25
Cross polar ratio (dB) 0° > 18 > 18 > 18 > 18 > 18 > 18 > 17 > 17
Max. power per input (W) 500 (at 50℃ ambient temperature) 250 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc) ≤ -153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC Ground

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).


2. Electrical datasheet in XML format is available.
106
Mechanical Properties
Antenna dimensions (H x W x D) (mm) 1999 x 349 x 166
Packing dimensions (H x W x D) (mm) 2350 x 415 x 240
Antenna weight (kg) 23.4
Clamps weight (kg) 3.6 (2 units)
Antenna packing weight (kg) 35.7 (included clamps)
1310

Mast diameter supported (mm) 50 - 115


1999

Radome material Fiberglass


Radome colour Light grey
Operational temperature (℃) -40 .. +65
Frontal: 705 (at 150 km/h)
Wind load (N) Lateral: 230 (at 150 km/h)
Rear side: 730 (at 150 km/h)
Max. operational wind speed (km/h) 200
Survival wind speed (km/h) 250
Connector 6 x 4.3-10 Female
Connector position Bottom

Accessories
Item Model Description Weight Units per antenna

Downtilt kit ASMDT0D01 Mechanical downtilt: 0 - 12 ° 2.1 kg 1 (Separate packing)

91
DXXX-690-960/1695-2690/1695-2690-65/65/65-16i/18i/18i-M/M/M-R
EasyRET 6-Port Antenna with 3 Integrated RCUs - 2.0m
Model: ATR4518R6v06

Integrated RET Specifications

Properties
RET type Integrated RET
RET protocols* AISG 2.0 / 3GPP
Input voltage range (V) 10 - 30 DC
< 6 (motor activated, 12V)
Power consumption (W)
< 1.5 (stand by, 12V)
Adjustment time (full range) (s) < 65 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male / Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC n/c RS-485B n/c RS-485A DC DC return n/c
3 (10/350 μs)
Lightning protection (kA)
10 (8/20 μs)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details
about protocol switching function, contact Huawei before system installation.

Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55022 (Emission),
EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM

Integrated RET S/N:

HWMxxx……Ly1
HWMxxx……r1
Ly1 Ry2
HWMxxx…..Ry2

r - Red y - Yellow
L - Left array R - Right array
r1

Pattern sample for reference

790 - 960 MHz 1710 - 2690 MHz 1710 - 2690 MHz


(Left) (Right)

92

You might also like