CURRICULUM VITEA

1. PERSONAL:
- Full Name : VÕ HỒNG KIỆT
- Date of Birth : 10/10/1988
- Gender: Male
- Marital Status: Married
- Place of Birth: Pho An Ward- Duc Pho District – Quang Ngai Province
- Address: 20/29 – No.3 Street- Binh Hung Hoa A Ward – Binh Tan
District – Ho Chi Minh City.
- Mobile: 0978.605.626 - Email: [email protected]
2. EDUCATION:
- 2014 – 2016 : Ho Chi Minh City Open University
• Master in Business Administrator
- 2006 – 2011 : Ho Chi Minh City University of Technology (Polytechnic)
• Electrical – Electronic Engineering in “Honor program” (Good degree:
8.20)
• During my studying time, I always got good mark in practice and experiment
subjects.
• I join the science research in DCS Lab (in my University).
3. WORK EXPERIENCE:
A. August 2020 – Present: Bureau Veritas Consumer Products Services
Viet Nam (BV CPS) – Product Certification Supervisor.
 Establish/review and approve of technical procedures of product certification
(electrical, toy and textile product incompliance with Technical regulation
QCVN)
 Ensure competency of product certification auditors
• Plan and deliver training plan;
• Plan and deliver onsite supervision and technical supervision
 Review and recommendation certification decision
 Ensure product certification activities implemented impartially and
complying with technical procedures and deliver quality objectives
 Monitor and request resources for product certification activities
 Prepare reports related to product certification activities for management
review

Page 1 / 5
  Execute the product certification audit on-site as lead auditor role (Assess
product process control and quality process control from material to final
product + sampling for testing).
 Manage the quality audit program from external audit (such as: BoA,
Ministry of Science and Technology (MOST), Ministry of Industry and
Trade (MOIT))
 Perform corrective action for any non-conformities raised by internal and
external audit.
B. September 2015 – July 2020: Quality Assurance And Testing Center
3 (QUATEST3) – Quality Management System and Product
Certification Department.
 September 2015- September 2016: with Observer and Auditor in training
position:
• Training about quality management system (ISO 9001);
Requirements for bodies certifying products, processes and services
(ISO 17065); Fundamentals of product certification and guidelines for
product certification schemes (ISO 17067); Testing and calibration
laboratories (ISO 17025)
• 6 months in hand training about testing method (in Bien Hoa testing
Lab of Quatest 3), I was trained about testing of electrical equipment,
electric cable (in Electrical Lab); EMC (Electromagnetic
Compatibility) (in EMC Lab); steels product ( in mechanical Lab)
• On-site training about product certification (observer). From March
2016, I was qualified to Auditor in training position
 September 2016- September 2017: with Auditor position
• Receive and asses the incoming data from auditee for product and
quality management system (ISO 9001) certification.
• Audit quality management system on site for product in compliance
with National Technical Regulation or technical standard with
Auditor role. Assessment product process control and quality process
control from material to final product.
• Estimate sample plan and take sample in audit date;
• Follow ISO 2859 (AQL) for withdrawing samples for presentative of
product lot/batch.
• Send sample for testing and evaluate the test report;
• Verifying the effectiveness of corrective actions taken as a result of
the audit;

Page 2 / 5
 • Do record for review and decision on certification;
 September 2017- July 2020: with Lead Auditor position:
• I was qualified to Lead Auditor for product and Quality Management
Systems certification. I am responsible for the overall results of Audit
Program.
• I am also Quality Owner of Production and Quality Management
Systems Certification Department.
 Some products which I audited: Electrical equipment (rice cooker; water
heater; pressure cooker; air-conditioner; washer; microware; fridge; fan...);
electrical cable; electrical cabinet; light; steel; helmet; aluminum profile;
UPVC, PE, PP pipe; glass; paint; toy; textile; rubber, Lubricant....
 Some key Auditees:
• Electrical equipment and cables: Alpha; Asia; Centon; Maxvic;
Cadivi; Daphaco; TaihanVina; Electrolux; Midea; Panasonic; Sharp;
Toshiba; Atlantic; Samsung; Daikin; Mitsubishi; Thinh Phat Cable...
• Steel: China Steel Corporation; Dragon Steel Corporation; Chung
Hung Steel Corporation; China Steel Sumikin Vietnam Joint Stock
Company (CSVC); Ns Bluescope Việt Nam Co., Ltd; Tôn Đông Á
Co., Ltd; Tôn Phuong Nam Co., Ltd; Vina Kyoei Co., Ltd...
• Other: Ferrero Asia Pacific Pte. Ltd; Sheel; ExxonMobil
 Vietnamese Delegate in JSCEEE (Asean Joint Sectoral Committee For
Electrical And Electronic Equipment)
 Vietnamese Delegate in ACCSQ (Asean Consultative Committee For
Standards And Quality)
C. September 2013 – September 2015: Saigon Public Lighting Company
(SAPULICO)
I worked at technical – safety department. I am responsible for surveying; designing;
estimating and monitoring of new public lighting system; traffic system. Some key
projects which I worked: Nguyen Hue walking Street; the art lighting for Ho Chi
Minh City People's Committee building; the art lighting for Ho Chi Minh City Post
office; the art lighting yearly Nguyen Hue Flower Street festivities.
D. January 2011 – June 2013: Procter& Gamble Indochina (P&G) I
passed Management trainee program (new hire band I management) and
work in Procter& Gamble Indochina (P&G) with role: process engineer (P.E) ,
Haircare Making progressive maintenance leader (PM leader), Shampoo line
leader.

Page 3 / 5
  With role PE: I owned process to making shampoo (from equipment in line
to process to making shampoo). I have experience in temp sensor, pressure
transmitter, flow transmitter, pump, mill, heat exchanger, quadro, level
transmitter, load cell, valve. And I am responsible for process making
shampoo from material to finish product (before packing) and
troubleshooting for all issue (scrap or rework). In this time, I also joined FI
(Focus improvement) pillar which is responsible for improve all loss or
opportunity in my department (the best achievement is improve PR from
78% in 2011 to 87% in September 2012). And I am also responsible for all
document involving quality, safety, calibration and maintenance
 With role PM (Progressive maintenance) leader: I am responsible for plan
maintenance and lead team to do progressive maintenance and make sure all
equipment don’t occur breakdown.
 September 2011- September 2012: with position (Startup leader), I and team
had successes to start-up new production line (GSS 6 ton- the biggest
capacity line in plant) and it support our plan increase double capacity in
making shampoo.
 September 2012- September 2013: I promoted to Shampoo Line leader. I am
responsible for the overall results of production line in the areas of Safety,
Quality Process Reliability and Production Throughput, Cost, and Operating
Personnel Development and Performance
• Proven track record of leading teams in a manufacturing and technical
environment to deliver production goals with high focus on safety and
quality
• Good understanding of Process Control and Plan - Do - Check - Act
Cycle theory
• Work across other plant functions (engineering, planning, quality
assurance, process optimization) and regional resources (central
engineering, R&D, other P&G plants) to deliver desired results.
E. June 2009 – September 2009 and June 2010 – September 2010: I
joined summer internship in FrieslandCampina Vietnam (Dutch
Lady Vietnam) (this internship include of scholarship program). In
there , I learn about:
• SCADA (Intouch, Citect…)
• PLC( AB, Siemens, ABB, Omron….).
• Some TetraPak equipment and other
packing equipment.

Page 4 / 5
4. SOME CERTIFICATES:
- ISO 9001:2015 Lead Auditor (Bureau Veritas)
- ISO 14001:2015 Lead Auditor (SGS)
- ISO 17065:2012 Product certification Auditor (Directorate for Standards,
Metrology and Quality (STAMEQ))
- ISO 17020:2012 Product Inspection Auditor (STAMEQ)
- Internal Audit Training on Global Gap (Bureau Veritas)
- ISO 14001:2015 (Quatest 3)
- Six Sigma Green Belt (FDX Korea)
- Awareness and Internal Auditor of Food Safety Management Systems According to
FSSC 22000 (BSI)
- Textile Dyeing Technology (Ho Chi Minh City of Technology)
- EMC basic Course in Indonesia (Japan Business Machine and information system
industries Association)
5. LANGUAGE AND COMPUTER SKILL:
- Advanced level General English and Conversation.
- TOEIC (610)-2011.
- Microsoft Windows all versions, Microsoft Office (Word, PowerPoint, Excel,
Outlook; VB for Excel…).
- SAP program
6. PERSONAL PROFILE:
- Optimistic; careful and patient.
- Have ability to forecast and be active.
- Have creation and improvement abilities.
- Willing to learn new thing.
- Can work under high pressure.
- Good communication skill and have the spirit of teamwork and cooperation.
- Hard-working and do not mind difficulties.
- Have ambition to get promotion and overcome the hard background.
*** End **

Page 5 / 5