Scribd Logo
Upload

Welcome to Scribd!

  • 32 views

    3 msds-LANOTEX CS-105

    Uploaded by

    saddam
    This document provides a material safety data sheet for a cotton softener product. It lists the manufacturer as Hwa Tai Industry Co. and identifies the product as containing fatty acid amide derivatives. The product is classified as a class 9 miscellaneous material and poses slight health risks if inhaled, swallowed, or gets in contact with skin or eyes. Proper personal protective equipment should be worn when handling including dust masks, safety glasses, and gloves. The product is flammable and should be stored away from heat sources in a cool, ventilated area.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    3 msds-LANOTEX CS-105

    Uploaded by

    saddam
    32 views5 pages
    This document provides a material safety data sheet for a cotton softener product. It lists the manufacturer as Hwa Tai Industry Co. and identifies the product as containing fatty acid amide derivatives. The product is classified as a class 9 miscellaneous material and poses slight health risks if inhaled, swallowed, or gets in contact with skin or eyes. Proper personal protective equipment should be worn when handling including dust masks, safety glasses, and gloves. The product is flammable and should be stored away from heat sources in a cool, ventilated area.

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides a material safety data sheet for a cotton softener product. It lists the manufacturer as Hwa Tai Industry Co. and identifies the product as containing fatty acid amide derivatives. The product is classified as a class 9 miscellaneous material and poses slight health risks if inhaled, swallowed, or gets in contact with skin or eyes. Proper personal protective equipment should be worn when handling including dust masks, safety glasses, and gloves. The product is flammable and should be stored away from heat sources in a cool, ventilated area.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    32 views5 pages

    3 msds-LANOTEX CS-105

    Uploaded by

    saddam
    This document provides a material safety data sheet for a cotton softener product. It lists the manufacturer as Hwa Tai Industry Co. and identifies the product as containing fatty acid amide derivatives. The product is classified as a class 9 miscellaneous material and poses slight health risks if inhaled, swallowed, or gets in contact with skin or eyes. Proper personal protective equipment should be worn when handling including dust masks, safety glasses, and gloves. The product is flammable and should be stored away from heat sources in a cool, ventilated area.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 5

    MATERIAL SAFETY DATA SHEET

    IDENTITY (As used on label and list) : COTTON SOFTENER (LANOTEX CS-105)
    SECTION 1. Chemical Product & Company Identification
    Manufacture's Name : HWA TAI INDUSTRY CO., LTD.
    Address : 582 Moo 4 Bangpoo Industrial Estate Soi 13
    Sukhumvit Rd., Tambol Praksa, Amphur Muang,
    Samutprakarn. 10280 THAILAND
    Tel & Fax : 0-23936688 & 0-23961996
    Date prepare : March 16, 2018
    SECTION 2. Composition/Information On Ingredients
    Component wt% CAS Registry No.
    Fatty acid amide derivatives - -
    Hazardous Ingredients (s) wt% CAS Registry No.
    None hazardous ingredients

    SECTION 3. Hazardous Ingredients/Identity Information


    Hazards Classification : Class 9 miscellaneous
    Incursion approach : Inhalation, swallow or skin or eyes contact
    Health hazard : Swallowed: some damage to the digestive system.
    Inhalation: slight stimulating effect on the respiratory tract.
    Skin : direct contact has no stimulating effect on the skin.
    Eye : Direct contact with a slight stimulating effect on
    the eye.
    Environmental hazard : Will not cause harm on aquatic creatures.
    Explosion hazard : Will burn if running into naked fire or high heat.
    Pictograms

    1
    SECTION 4. First Aid Measures
    Eyes. : Immediately flush with water for 15 minutes.
    Skin : No first aid should be needed.
    Inhalation. : Remove to fresh air. Get medical attention if ill effects persist.
    Ingestion. : Get medical attention.
    Comments. : Treat according to person’s condition and specifics of exposure.

    SECTION 5. Fire Fighting Measures


    Hazardous characteristic : Flammable if running into naked fire and high heat
    Hazardous burning products : Carbon monoxide, carbon dioxide, nitrogen oxide, water
    Extinguishing media : Dry powder, carbon dioxide (CO2), foam, sand
    Special firefighting procedures : Recommend wearing regular gas masks, protective
    clothing, protective gloves, protective boots

    SECTION 6. Accidental Releases Measures


    Accidental measures : Isolate leakage pollution area, restrict come an out. Cut off the fire
    source. Suggest emergency personnel wear dust mask
    (comprehensive cover), and wear the general working garments.
    For slight leak: collect it in a dry, clean, covered container with
    clean shovel, and then deeply bury in special waste places.
    For serious leak: Collecting, recycling or shipping to waste places
    for disposal.

    SECTION 7. Handling And Storage


    Operation disposal notice: Be well ventilated. Operators must be given special training,
    and strictly abide by the operation rules. Recommend
    operators wear self-priming filter dust mask, chemical safety
    protective glasses and resistant chemical glove. Away from
    fire and heat source, and smoking is strictly prohibited.

    2
    Use explosion-proof ventilation systems and equipment. Avoid
    dust. Avoid to contact with the oxidant. Equipped with
    corresponding varieties and number of fire equipment and
    emergency handling equipment of leakage.
    Storage notice : Store in a cool, ventilated warehouse. Away from fire and heat
    source. Store apart from oxidant. Avoid mixed store. Equipped
    with corresponding varieties and number of fire equipment.
    Storage areas should be equipped with suitable material for
    containing leakage

    SECTION 8. Exposure Controls/Personal Protection


    Hygiene standards in workshop : In China: MAC（mg/m3）:10
    In America: TLV-TWA（mg/m3）:6
    Inspection method : Gas chromatographic
    Engineering control : Provide good natural ventilation condition.
    Respiratory protection : Wear formal dust mask
    Eyes protection : Wear formal eyes mask
    Body protection : Wear suitable working suit
    Hand protection : Wear rubble gloves
    Others : No smoking in working places.
    To maintain good healthy habits.

    SECTION 9. Physical And Chemical Properties


    Appearance : Beige white pearls
    Main component : Fatty acid amid derivatives
    Ionic : Weakly cationic
    pH (10% soln.) : 3.5-5.5
    Solubility : Can dissolve in the 25oC water
    Flash point : > 100oC

    3
    SECTION 10. Stability And Reactivity
    Condition to avoid : Avoid direct sunlight, high temperature and Heat, freezing
    Stability : Stable towards light, heat and physical shock in normal handling
    Incompatibility : None
    Hazardous Decomposition product : No data.
    Hazardous Polymerization : No data.

    SECTION 11. Toxicological Information


    Acute toxicity : LD50＞5000 mg/kg
    Stimulating : (rat oral) No stimulation on skin
    Carcinogenicity: This product shows no carcinogenicity under long time animal skin test

    SECTION 12. Ecological Information


    Ecological toxicity: Experiment shows that the product has no harmful to aquatic
    organisms (minimum LC50 EC50, IC50 > 1000 milligrams
    per liter). Experiment shows that the product has no obvious
    toxicity on organism in waste water treatment system (sludge
    respiratory IC50>1000 mg/l). Microtox 15m IC50: >1000 mg/L
    Biodegradability : In the environment, its degradation products will be carbon dioxide,
    nitrogen oxides, and water
    Biological enrichment or cumulative: No biological accumulating

    SECTION 13. Disposal Considerations


    Dispose of all wastes in accordance with federal, state and local regulations.

    SECTION 14. Transport Information


    When transporting, check for leaks from container, and securely load container
    while avoiding a fall, a drop or a collapse.

    4
    SECTION 15. Regulatory Information
    Observe all federal, state and local regulations.

    SECTION 16. Other Information


    Main Use : Textile Chemicals
    Prepared by : HWA TAI INDUSTRY CO., LTD.

    These data are offered in good faith as typical values and not as a production
    specification. No warranty, either expressed or implied, is made. The recommended
    handling procedures are believed to be generally applicable. However, each user should
    review these recommendations in the specific content of the intended use.

    You might also like