The document discusses various crushing and shredding machines produced by Handle including:
- Crushing rollers that can crush hard, lumpy clay and bouldery material into consistent sizes.
- Stone-eliminating crushers that separate clay from rocks in pit material.
- Knife crushers that are used for soft to medium-hard clay.
- Waste shredders that recycle clay residue from processes like shaping.
The machines are designed to be robust, adjustable to different materials, and increase efficiency in clay preparation.
The document discusses various crushing and shredding machines produced by Handle including:
- Crushing rollers that can crush hard, lumpy clay and bouldery material into consistent sizes.
- Stone-eliminating crushers that separate clay from rocks in pit material.
- Knife crushers that are used for soft to medium-hard clay.
- Waste shredders that recycle clay residue from processes like shaping.
The machines are designed to be robust, adjustable to different materials, and increase efficiency in clay preparation.
The document discusses various crushing and shredding machines produced by Handle including:
- Crushing rollers that can crush hard, lumpy clay and bouldery material into consistent sizes.
- Stone-eliminating crushers that separate clay from rocks in pit material.
- Knife crushers that are used for soft to medium-hard clay.
- Waste shredders that recycle clay residue from processes like shaping.
The machines are designed to be robust, adjustable to different materials, and increase efficiency in clay preparation.
The document discusses various crushing and shredding machines produced by Handle including:
- Crushing rollers that can crush hard, lumpy clay and bouldery material into consistent sizes.
- Stone-eliminating crushers that separate clay from rocks in pit material.
- Knife crushers that are used for soft to medium-hard clay.
- Waste shredders that recycle clay residue from processes like shaping.
The machines are designed to be robust, adjustable to different materials, and increase efficiency in clay preparation.
AND SHREDDER WMM / WMH WSB / WSBH WM Whether for hard, cloddy material or for WMS bouldery pit-mined material - HÄNDLE's crushers, choppers and shredders are PRODUCT INFORMATION powerful, economical and robust. Perfect Comminution for Easy Shaping
The manufacture of high-quality ceramic products is decisively dependent on the starting materials, and it is im- portant that the clay body be of homogeneous consistency and have defined properties. The only way to achieve that is to systematically prepare the clay from the very moment of its extraction from the pit. The trouble is, every clay pit yields a different raw material! HÄNDLE, though, offers a range of options for effectively precrushing the raw material: crushing rollers for particularly hard, lumpy material, knife crushers for soft to medium-hard clay, and stone-eliminating crushers for material with considerable rock content. Add to all that a selection of waste shredders and other special- purpose machines.
Crushing roller, model WMH 818a with feed paddle-shaft and
adjustable roller gap
In General: The Crucial Characteristics of
Crushing Rollers by HÄNDLE
Made-to-measure knife disks and customerized Mobile or movable, depending on the equipment configurations assignment
Highly effective, easily accessible cleaning knives Exceedingly robust – a profitable investment for decades to come
Easily adjustable roller gaps
Optional feed paddles
Crushing roller, model WMH 416b with feed paddle-shaft and
adjustable roller gap
2 P R O D U C T I N F O R M AT I O N W M M / W M H | W S B / W S B H | W M | W M S Tough Machines for Tough Jobs
All our crushing rollers have infinitely adjustable roller
gaps ranging from 5 mm to 100 mm. This gives you exactly the right technology for material of whatever description, for size reduction to whatever degree, and for throughputs of whatever rate. All models are available with an optional feed paddle to accommodate particularly lumpy, sticky material. Also, all machines with the exception of the WM 312 are available with mechanical (WMM) or hydraulic (WMH) drives. The fact that our mechanical and hydraulic crushing Crushing roller for highest capacities with infinitely variable rollers are infinitely adjustable, together with their hydraulic drive differential speeds, adds up to the most efficient, energy-saving mode of operation.
Maximum-economy Components Design details minimize maintenance expenditures and wear rates. For example, the rollers run on oversized shafts that are supported in heavy-duty self-aligning roller thrust bearings; the rolling crushers come with either one-piece toothed disks or disks with individually replaceable knives, and the cleaning knives are both adjustable and individually replaceable.
Knive disks
Overload Protection
The models with mechanical drive (WMM) have a torque limiter with an adjustable cutoff tripping torque. The hydraulic drive on WMH models has a particularly intelligent built-in strategy: overloading causes the rollers to briefly stop, turn in the opposite direction for about 5 seconds, and then resume their normal sense or rotation. This dislodges blocked rocks and puts them in a different position prior to continuing on with the highly efficient, energy-wise size-reduction process.
Adjustable tooth disks
3 Normal position / Start ejction Catching / Elininate
Special Tasks Call For Special
Approaches Stone eliminating roller crusher WSB 816b
In the case of pit material with a high rock content,
HÄNDLE-built stone-eliminating crushers reliably sepa- rate the clay from its stones. Basically, these crushers are of much the same design as crushing rollers, except that they include a supplementary hydraulic ejecting rake the eliminates foreign objects. As soon as any stones begin to block up the roller drive, cau- sing the torque to rise past a predefined level, the crusher stops, and its ejecting rake moves in between the crushing disks, dislodges the stones, and dispat- ches them down a chute and into a receiver. After that, the crusher goes back into action at its normal speed and in its normal direction.
Automatic sorting out of stones
4 P R O D U C T I N F O R M AT I O N W M M / W M H | W S B / W S B H | W M | W M S Sharp Knives vs. Tough Clay
Knife crushers by HÄNDLE are used for primary crus-
hing of soft and medium-hard clay with a dry-to-moist consistency. They come with two knife roller assem- blies featuring oversized roller shafts running in very robust pillow blocks. The knives are hard-faced for heavy duty and can be individually replaced.
Knife crusher WM 26b
Technology for Cost-efficient Recycling
HÄNDLE's waste shredders chop up clay residue left
over from, say, the shaping process. Hence, such waste material need not be disposed of at considera- ble expense, but instead can be fed right back into the production process.
Waste shredder WMS 770a
5 A partner of international size
Our products are used in many different countries, and
they are more than a match for our competitors here in Germany. With HÄNDLE, you'll always have a competent contact in a place near you, anywhere in the world.
CRUSHING ROLLERS WMM / WMH
TYPE Roller ø/ Hardness Feed size up to Final size Volumetric Power
Rollerlength up to approx. up to approx. throughput (roller- consumption approx. gap-dependend) up to approx. up to approx. mm Mohs mm mm m3/h kW
Mechanical WMM 312a 300 / 1200 4 500 x 400 x 300 60 x 40 x 20 30 42
WMM 416b 430 / 1600 4 600 x 500 x 400 100 x 60 x 30 80 72
WMM 618e 600 / 1800 6 800 x 600 x 500 100 x 80 x 40 125 130
WMM 818c 920 / 1860 6 1000 x 600 x 500 100 x 80 x 30 250 145
Hydraulic WMH 416b 430 / 1600 4 600 x 500 x 400 100 x 60 x 30 80 72
WMH 618a 550 / 1820 6 800 x 600 x 500 150 x 100 x 60 120 105
WMH 818a 800 / 1860 6 1000 x 600 x 500 150 x 100 x 60 250 145
6 P R O D U C T I N F O R M AT I O N W M M / W M H | W S B / W S B H | W M | W M S STONE-ELIMINATING CRUSHERS WSB / WSBH
TYPE Roller ø/ Hardness Feed size up to Final size Volumetric Power
Rollerlength up to approx. up to approx. throughput consumption approx. up to approx. up to approx. mm Mohs mm mm m3/h kW
Mechanical WSB 816b 600 / 1590 4 1000 x 600 x 500 250 x 150 x 20 200 40
Hydraulic WSBH 818a 800 / 1800 4 1000 x 600 x 500 250 x 150 x 50 250 70
WASTE SHREDDERS WMS
TYPE Roller ø/ Hardness Feed size up to Final size Volumetric Power
Rollerlength up to approx. up to approx. throughput consumption approx. up to approx. up to approx. mm Mohs mm mm m3/h kW
WSB 365a 300 / 650 2 1000 x 100 x 15 5 x 10 x 20 5 8
WSB 770a 550 / 770 2 800 x 200 x 100 150 x 100 x 20 15 18
WSB 1000a 550 / 1000 2 1000 x 200 x 100 100 x 200 x 100 20 22
KNIFE CRUSHERS WM
TYPE Roller ø/ Hardness Feed size up to Final size Volumetric Power
Rollerlength up to approx. up to approx. throughput consumption approx. up to approx. up to approx. mm Mohs mm mm m3/h kW
WM 26g 680 / 1200 3 1000 x 600 x 400 120 x 60 x 40 40 30
Subject to technical modifications, due to constant development.
7 Laboratory Performance as you need
Conveying and storing The throughput stated for the machines is in
m3/h. For the extruders it refers to the compact,
Screening wet pressed body, while for the box feeders
and handling equipment it refers to the loose bulk. Feeding and propotioning Please note the following rule of thumb:
Crushing 1 m3 wet pressed body = 1,2 – 1,35 m3 loose bulk Mixing and homogenizing 1 m3 wet pressed body = 1,36 t fired clay
