PLANNING, DESIGING AND ESTIMATION OF

AUDITORIUM
A PROJECT REPORT

Submitted by

KATHIR S 811417103012
MANISHA S 811417103013
SWATHI P 811417103301
In partial fulfillment for the award of the degree

of

BACHELOR OF ENGINEERING
IN
CIVIL ENGINEERING

JAYARAM COLLEGE OF ENGINEERING AND TECHNOLOGY

TIRUCHIRAPALLI – 620014

ANNA UNIVERSITY : CHENNAI – 600025

MARCH – 2020

i
 ANNA UNIVERSITY : CHENNAI – 600025
BONAFIDE CERTIFICATE
Certified that this project report “ PLANNING, DESIGING AND
ESTIMATION OF AUDITORIUM ” is the Bonafide work of “ KATHIR S
(811417103012) , MANISHA S (811417103013) , SWATHI P
(811417103301)” who carried out the Project work under my supervision.

SIGNATURE SIGNATURE

Ms.G.KIRUTHIGA M.E., Mrs.M.GAYATHRI M.E.,

HEAD OF THE DEPARTMENT SUPERVISOR

ASST. PROFESSOR

CIVIL ENGINEERING CIVIL ENGINEERING

JAYARAM COLLEGE OF JAYARAM COLLEGE OF

ENGINEERING AND ENGINEERING AND

TECHNOLOGY TECHNOLOGY

TRICHY - 621014 TRICHY - 621014

EXAMINATION HELD ON : ……………..

INTERNAL EXAMINER EXTERNAL EXAMINER

ii
 ACKNOWLEDGEMENT
The success of the project work depends upon teamwork and co-operation of
many people. We work like to take this opportunity to express our gratitude to the
people who supported and guidance made this project a successful one.

First of all, we take this ammines pleasure in thanking our respected

chairman Er.M.SUBRAMANIAM, M.E., for providing us this golden
opportunity.

We would like to express my sincere thanks to our principal

Dr.K.R.THANGADURAI, M.TECH., Ph.D., of Jayaram college of
Engineering & Technology, for his encouragement and blessings.

We gratefully thank our Head of the Department Ms.G.KIRUTHIGA,

M.E., for providing us the opportunity and encouragement to do this project.

We take an extensive privilege in expressing the sense of gratitude and

heartfelt thanks to our project guide Mrs.M.GAYATHRI, M.E., for giving
valuable ideas and guiding us to do the good work at the right time.

Also we would like to convey our special thanks to the faculty members of
Civil Engineering Department for their help in the project work.

Above all, we express our deep gratitude to the Almight who guide and
helps us in all works.

iii
 ABSTRACT
This Project work deals with Planning, designing and estimation of
a proposed Auditorium for Jayaram college of engineering and
technology. The Planning of the Auditorium is done for the total
accommodation of 1000 persons with an additional stage capacity to
hold 25 persons. All the plans are drawn by using the Auto CADD 2009.
The Auditorium is planned as per the guidelines given in the National
Building Code (NBC). The Auditorium is designed as a framed
structure. IS 456:2000 is followed for manual design of isolated footing,
Column, Plinth Beam, Septic Tank and Slab. Also IS 800:2007 is
followed for the design of Steel Roof Truss and for its components. The
grade of used concrete for the RCC members is M20 and Reinforcing
steel used is High Yield Strength Deformed (HYSD) bars of grade
Fe415. IS 875 Part I, II, III, IV and IS 1893 Part I are used to calculate
Live Load, Dead Load, Wind Load, Load Combination and Seismic
Load respectively. The Planning, Designing and Construction of the
building is with well-spaced seating arrangement and ventilation. The
structure is designed to withstand Earthquake motions.
KEY WORDS: Auditorium, Auto-CAD, National building, Framed structure,
Seismic load, Well spaced, Earth quake motion.

iv
 TABLE OF CONTENTS

CHAPTER NO. TITLES PAGE NO.

ACKNOWLEDGEMENT iii
ABSTRACT iv
TABLE OF CONTENTS v
LIST OF FIGURE vi
LIST OF SYMBOLS vii
1 INTRODUCTION 1
1.1 General 1

1.2 Objective 3

1.3 Scope of Project 4

1.4 Code books used 4
1.5 Load and Combination 5
1.6 Design Theory 6

2 LITERATURE REVIEW 8
3 METHODOLOGY 11
4 SPECIFICATIONS 12
4.1 Site Selection 12
4.2 Rcc works 13
5 DESIGN OF R.C ELEMENTS
5.1 Designing methods 14
5.2 Designing of Slab 15
5.3 Designing of Bea 21
5.4 Designing of Column 28
5.5 Designing of Foundation 32
6 ESTIMATION 39
7 CONCLUSION 52

v
 LIST OF FIGURES

CHAPTER NO. TITLES PAGE NO.

5.1 Designing methods 14

5.2 Designing of Slab 15
5.3 Designing of Beam 21
5.4 Designing of Column 28
5.5 Designing of Foundation 32

vi
 LIST OF SYMBOLS

The following symbols carrying the meanings noted against them are used in this
project.

A Area

Ac Area of Concrete

Ag Area of section

Asc Area of steel in Compression

Ast Area of steel in tension

B Breadth of beam

D Overall Depth

d Effective depth

d’ Effective cover

fck Characteristic compressive strength of concrete

y Characteristic yield strength of steel

DL Dead Load

Wu Factored Load

LL Live Load
τ Shear stress in concrete

bf Breadth of flange

pf Thickness of flange

vii
b Width of web

Lx Shorter span

Ly Longer span

τcmax Maximum shear stress in concrete with shear

Reinforcement

Ld Development length

τbd Design bond stress

e Eccentricity

R Rise

T Tread

τv Nominal shear

φ Diameter

t Thickness of waist slab or sloped slab

w Dead load of slab

w1 Dead load of span on horizontal span

w2 Dead load of step/m length

I Moment of inertia

viii