Scribd
Upload
52 views8 pages

Hcs12 Code

The document contains C code for controlling LEDs on a microcontroller. It defines functions for initializing port B of the microcontroller as an output and for delaying execution. The main function sets port B to output, turns off all LEDs initially, and then enters a forever loop that blinks the LEDs in different patterns by writing values to port B and delaying between each write.

Uploaded by

darkavengerpark
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
52 views8 pages

Hcs12 Code

The document contains C code for controlling LEDs on a microcontroller. It defines functions for initializing port B of the microcontroller as an output and for delaying execution. The main function sets port B to output, turns off all LEDs initially, and then enters a forever loop that blinks the LEDs in different patterns by writing values to port B and delaying between each write.

Uploaded by

darkavengerpark
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 8

1

MAIN.C

#include "main.h"

void delay(unsigned int n);

void main()

//unsigned char mask;

// Make Port B to output

Regs.ddrb.byte = 0xFF; // Set port B to output

// Turn off LED

Regs.portb.byte = 0xFF; // Make all port B to 1

for (;;) {

Regs.portb.byte = 0b00111100;

delay(5);

Regs.portb.byte = 0b11000011;

delay(5);

}
}

// ÀÏÁ¤ÇÑ ½Ã°£À» Áö¿¬½ÃÅ°´Â ÇÔ¼ö

void delay(unsigned int n)

unsigned int i;

while (n > 0) {

for (i=1; i != 0; i++); // ¾Æ¹«°Íµµ ÇÏÁö ¾ÊÀ¸¸é¼- ½Ã°£ Áö¿¬

n--;

MAIN.H

#ifndef MAIN_H /*prevent duplicated includes*/

#define MAIN_H

#include "projectglobals.h"

#endif /*MAIN_H*/
2

MAIN.C

#include "main.h"

void delay(unsigned int n);

void main()

//unsigned char mask;

// Make Port B to output

Regs.ddrb.byte = 0xFF; // Set port B to output

// Turn off LED

Regs.portb.byte = 0xFF; // Make all port B to 1

for (;;) {

Regs.portb.byte = 0x00;

delay(5);

Regs.portb.byte = 0x18;

delay(5);

Regs.portb.byte = 0x3C;
delay(5);

Regs.portb.byte = 0x7E;

delay(5);

Regs.portb.byte = 0xFF;

delay(5);

Regs.portb.byte = 0x7E;

delay(5);

Regs.portb.byte = 0x3C;

delay(5);

Regs.portb.byte = 0x18;

delay(5);

// ÀÏÁ¤ÇÑ ½Ã°£À» Áö¿¬½ÃÅ°´Â ÇÔ¼ö


void delay(unsigned int n)

unsigned int i;

while (n > 0) {

for (i=1; i != 0; i++); // ¾Æ¹«°Íµµ ÇÏÁö ¾ÊÀ¸¸é¼- ½Ã°£ Áö¿¬

n--;

MAIN.H

#ifndef MAIN_H /*prevent duplicated includes*/

#define MAIN_H

#include "projectglobals.h"

#endif /*MAIN_H*/

MAIN.C

#include "main.h"

void delay(unsigned int n);

void main()
{

//unsigned char mask;

// Make Port B to output

Regs.ddrb.byte = 0xFF; // Set port B to output

// Turn off LED

Regs.portb.byte = 0xFF; // Make all port B to 1

for (;;) {

Regs.portb.byte = 0x7E;

delay(5);

Regs.portb.byte = 0xBD;

delay(5);

Regs.portb.byte = 0xDB;

delay(5);

Regs.portb.byte = 0xE7;

delay(5);

Regs.portb.byte = 0xFF;
delay(5);

Regs.portb.byte = 0xDB;

delay(5);

Regs.portb.byte = 0xBD;

delay(5);

Regs.portb.byte = 0x7E;

delay(5);

// ÀÏÁ¤ÇÑ ½Ã°£À» Áö¿¬½ÃÅ°´Â ÇÔ¼ö

void delay(unsigned int n)

unsigned int i;

while (n > 0) {

for (i=1; i != 0; i++); // ¾Æ¹«°Íµµ ÇÏÁö ¾ÊÀ¸¸é¼- ½Ã°£ Áö¿¬

n--;

}
MAIN.H

#ifndef MAIN_H /*prevent duplicated includes*/

#define MAIN_H

#include "projectglobals.h"

#endif /*MAIN_H*/

You might also like