880-960 MHz

5820100
5820000 5820000G
Single Band Antenna, dual polarisation, 2 connectors
Variable electrical tilt 0°-10° Xpol / 65° Az
Slimline profile for low wind load 17.5 dBi
MET and RET versions, AISG1.1 or 3GPP/AISG2.0
RET module fully inserted inside the antenna (field replaceable)

Model number options: 5820100 Manual Electrical tilt Antenna

5820000 Remote Electrical Tilt Antenna (AISG1.1)
5820000G Remote Electrical Tilt Antenna (3GPP/AISG2.0)

Electrical Characteristics
Frequency Band 880 to 960 MHz
Gain 17.5 dBi
Input Impedance 50 ohms
VSWR <1.4
Polarisation ±45°
DT 5484 - Ed C- page 1/2 - We reserve the rights to modify our products without prior notice - Several patents pending regarding this product.

Horizontal Beamwidth (-3 dB) 65°

Vertical Beamwidth (-3 dB) 6.9°
Electrical Downtilt range 0° to 10°
Isolation between ports >30 dB
Upper Sidelobe Rejection
18 dB typ.
(20° sector above main beam)
Front to back ratio >25 dB
Maximum Power (per port) 200 W
Intermodulation
<-110 dBm
3rd order for 2 x 20 W carriers
Connectors 2 x 7-16 DIN female, Long Neck
Electrical Downtilt Control
Manual control: The tilt indicator is covered by a removable transparent cap (see photo next page).
A knob at the end of the tilt indicator allows change of the tilt without need for a tool. To access the knob,
the cap is removed by turning it counter clockwise. It is re-installed by opposite rotation.
Remote control: The remote control of the electrical tilt is managed by a module (MDCU) totally inserted
at the bottom of the antenna. For RET control, the transparent cap must be in place and locked.
This module does not add any additional length at the bottom of the antenna. The tilt angle indicator
stays always visible and the antenna still has manual tilt control (manual override).

RET module part number MDCU-A0003 for AISG1.1 protocol (one unit included in 5820000)
MDCU-G0003 for 3GPP/AISG2.0 protocol (one unit included in 5820000G)

Environmental
Operating Temperature Range -40°C to +60ºC
Environmental ETS 300 019
RoHS compliant Yes

w w w. a m p h e n o l - ja yb e a m . co m
 880-960 MHz
5820100
5820000 5820000G

Mechanical Characteristics
Dimensions (see drawing) Height: 2688 mm Width: 260 mm Depth: 151 mm
Packaging
Weight 17 kg (excluding mounting accessory)
Carton box
Shroud Outdoor plastic, grey RAL7035
2.93 x 0.35 x 0.24 m
Wind Speed Operational: 160 km/h Survival: 200 km/h
0.246 m3 25kg
Wind load at 160 km/h 600 N
Mounting Kit Options (These installation accessories must be ordered separately)
Description Part number Weight
Brackets for pole 48 to 115 mm 0900393/00 5.1 kg
Brackets for pole 70 to 150 mm 0900501/00 5.8 kg
Kit to add mechanical tilt (0° to 10°) to above brackets 0900394/00 3.1 kg
Wall mounting brackets with azimuth pan 0900395/00 2.3 kg
Wall mounting brackets with mechanical tilt and azimuth pan 0900533/00 4.4 kg

Antenna bottom Dimensions (in mm)

DT 5484 - Ed C- page 2/2 - We reserve the rights to modify our products without prior notice - Several patents pending regarding this product.

Location of the MDCU

for RET control

Tilt indicator covered by a transparent cap.

Manual adjustment is accessed by removing
the cap.
For RET control, the cap must be in place.

Installation

Always attach the antenna by its 3 mounting points.

Do not install the antenna with the connectors
facing upward.

w w w. a m p h e n o l - ja yb e a m . co m