Republic of the Philippines

Department of Education
REGION VII- CENTRAL VISAYAS
DIVISION OF BOHOL
ALICIA DISTRICT

SUMMATIVE ASSESSMENT 4–FOR WEEK 7 & 8

ELECTRONIC PRODUCTS ASSEMBLY AND SERVICING (EPAS) 9

Name: _____________________________ Grade & Section: ____________________ Date: ___________

Directions: Multiple Choice. Read the questions carefully. Encircle the letter of your answer.

1. Which material is given when you are officially hired in a company?

A. Product brochure
B. Workers handbook
C. Application form
D. None of the above
2. Why do you need to know the standard operating procedure?
A. To be able to work safe in a workplace environment.
B. To be able to work efficiently.
C. To be guided accordingly and apply to specific situation in the workplace.
D. All of the above.
3. Which of the following is the step to build standard operating procedure to improve management system?
A. System > procedure > steps
B. Steps > procedure > system
C. Steps > system> procedure
D. Procedure> steps > system
4. Which of the following situations is NOT an example of following standard operating procedure?
A. A worker wearing PPE before starting any task.
B. A student read student’s handbook after enrolled in a university.
C. An ENT doctor operates in an acute appendicitis.
D. None of the above
5. Which of the following defined as the best, safest and easiest way to do a job or task which ensure consistent
quality, cost and delivery to the customer?
A. System
B. Steps
C. Standard
D. None of the above
6. Which of the following situations is the reason why SOP is needed?
A. A worker fully fulfills his job in a company.
B. A nurse taking care of a patient.
C. A plumber continuously getting back jobs from a customer
D. A doctor heals his patients well.
7. When choosing the right materials characteristics, which of the following should be considered?
A. Selection, testing and cost
B. Standard of operating procedures
C. Reliability, good quality, suitable for the application, low cost
a. None of the above
8. What are the factors to consider when choosing the right materials?
A. Selection, testing and cost
B. Standard of operating procedures
C. Reliability, good quality, suitable for the application, low cost
D. None of the above
9. Which of the statement defines “good quality” characteristic of material?
A. A material that can function well.
B. A material that is long lasting and safe to use.
C. A material that is necessary to make the project possible.
D. A material that is less expensive.
10. Which of the statement defines “low cost” characteristic of materials?
A. A material that can function well.
B. A material that is long lasting and safe to use.
C. A material that is necessary to make the project possible.
D. A material that is less expensive.
11. Which of the statement defines “reliable” characteristic of materials?
A. A material that can function well.
B. A material that is long lasting and safe to use.
C. A material that is necessary to make the project possible.
D. A material that is less expensive
12. Which of the statement defines “suitable for the application” characteristic of materials?
A. A material that can function well.
B. A material that is long lasting and safe to use.
C. A material that is necessary to make the project possible.
D. A material that is less expensive
13. Which of the following is NOT a thing to consider when receiving a material?
A. Any exceptions must be noted so that partial payments can be processed, or defective goods can be
returned.
B. The materials are in acceptable condition.
C. The terms regarding installation and/or set-up of equipment are met.
D. The materials indicated on the purchase order with regard to quantity and discount.
14. When writing a safety work procedure, which of the following statement is not true?
A. Changing jobs or task.
B. When designing a new job or task.
C. When introducing a new leader.
D. None of the above.
15. How the safe working procedure is identified?
A. The control measures that have been formulated for these tasks.
B. The materials are in acceptable condition.
C. The terms regarding installation and/or set-up of equipment are met.
D. The materials indicated on the purchase order with regard to quantity and discount.
16. Which of the following situation is one of the factors of replacing of faulty materials?
A. The material shows rust and molds.
B. The material is physically seen as the product specification says.
C. The material is tested functional.
D. None of the above
17. Which of the following describes deterioration of materials?
A. The material is physically seen as the product specification says.
B. The material is tested functional.
C. The material physical appearance shows fading of colors and falling of parts.
D. None of the above
18. Which of the following describes inadequacy of materials?
A. A material that performs the way it should be.
B. The material is not helping to produce more product.
C. A material that is long lasting and safe to use.
D. None of the above.
19. Which of the statement defines “good working condition” of material?
A. A material that can function well.
B. A material that is long lasting and safe to use.
C. A material that is necessary to make the project possible.
D. A material that is less expensive.
20. Which of the statement describe the recommendation in replacing faulty material?
A. Tell the retailer about the problem and ask for the goods to be either repaired or be replaced.
B. if the faulty goods are still covered by their guarantee, contact the manufacturer, tell them about the
problem and ask for the goods to be repaired or replaced.
C. Write to the retailer and make a more formal request.
D. All of the above.
ANSWER KEY:

1. B
2. D
3. A
4. C
5. C
6. C
7. C
8. A
9. B
10. D
11. A
12. C
13. C
14. C
15. B
16. A
17. C
18. B
19. A
20. D