Scribd
Upload
90 views3 pages

EE2001 Tutorial 1

This document provides tutorial problems for the circuit analysis course EE2001. It contains 5 problems of increasing complexity that involve determining currents, voltages, power dissipation, and equivalent resistances in various circuits using methods like applying Kirchhoff's laws, nodal analysis, and Y-Δ transformations. The final problem involves forming a supernode when analyzing a circuit containing a voltage source between two non-reference nodes.

Uploaded by

PeiXuan Ho
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
90 views3 pages

EE2001 Tutorial 1

This document provides tutorial problems for the circuit analysis course EE2001. It contains 5 problems of increasing complexity that involve determining currents, voltages, power dissipation, and equivalent resistances in various circuits using methods like applying Kirchhoff's laws, nodal analysis, and Y-Δ transformations. The final problem involves forming a supernode when analyzing a circuit containing a voltage source between two non-reference nodes.

Uploaded by

PeiXuan Ho
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

EE2001 Circuit Analysis

EE2001 Circuit Analysis


Tutorial 1

1. (i) Determine the current Ix in the circuit of Figure 1.1 (a).


(ii) Determine I, I1, I2, Vab and Vbc in the circuit of Figure 1.1 (b).
(iii) Find ܸ௢ in the circuit of Figure 1.1 (c) and the power dissipated by the
controlled source.

Figure 1.1 (a)

Figure 1.1 (b)

Figure 1.1 (c)

Ans: (i) 4/3 A; (ii) 3 A, 1 A, 2 A, 6 V, 12 V; (iii) -4.444 V, 98.75 W

1
2. In the circuit shown in Figure 1.2, determine ‫ݒ‬௫ and the power dissipated by
the 12-Ω resistor. (Hint: Reduce the part of the circuit on the right to an
equivalent resistor in series with the 1 Ω resistor.)

Figure 1.2

Ans: 2 V, 1.92 W

3. Obtain the equivalent resistance at the terminals a-b for the circuit in Figure
1.3. (Hint: Use Y-Δ transformation and note that the Y-network comprises
the three 10 Ω resistors.)

Figure 1.3

Ans: 9.231 Ω

2
4. Use nodal analysis to find ‫ݒ‬ଵ , ‫ݒ‬ଶ and ‫ݒ‬ଷ in the circuit of Figure 1.4. (Hint:
There is no voltage source in the circuit which is connected between two non-
reference nodes. Apply KCL to all the non-reference modes.)

Figure 1.4

Ans: 10 V, 4.933 V, 12.267 V

5. Determine voltage ‫ݒ‬ଵ through ‫ݒ‬ଷ in the circuit of Figure 1.5 using nodal
analysis. (Hint: Note that there is a voltage source in the circuit which is
connected between two non-reference nodes. Form a supernode using nodes
1 and 2. Also, note that in the circuit, conductance (in S) rather than resistance
(in Ω) is used.)

Figure 1.5

Ans: 18.858 V, 6.286 V, 13 V

You might also like