Scribd
Upload
90 views4 pages

DR Spraymaster DA Apr08

The document provides specifications for Spraymaster Classic deaerators including tank dimensions, ratings, and notes. Key details include tank capacities ranging from 230 to 5,600 gallons, tank weights when dry or flooded, tank sizes in diameter and length, and overall unit dimensions. Notes provide additional information on mounting, piping, fittings, and optional configurations.

Uploaded by

jesusjj01
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
90 views4 pages

DR Spraymaster DA Apr08

The document provides specifications for Spraymaster Classic deaerators including tank dimensions, ratings, and notes. Key details include tank capacities ranging from 230 to 5,600 gallons, tank weights when dry or flooded, tank sizes in diameter and length, and overall unit dimensions. Notes provide additional information on mounting, piping, fittings, and optional configurations.

Uploaded by

jesusjj01
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

SPRAYMASTER CLASSIC

DEAERATORS (Single Tank)

Dimensions and Ratings

CB-8448
Dimensions and Ratings Spraymaster

Figure 1a. Spraymaster Dimensions (sheet 1 of 2)


(NOTE 14) 0 "E" "D"
"B"
4 3 5 1 1 1
(9" FOR SM15)
"C" 0" "D" "E" "F" "G" "J" "H" "K" "L"
1/2" NPT AUTO. VENT VALVE 12"
"R" NPT. MANUAL VENT VALVE 2" DIA. HOLE
IN LIFTING LUGS
SM7 - 230 GALLON
WATER & STEAM INLET DETAIL

12
20 "N" 2 21

13
"A"
TANK "P"
DIA.

8 9 10

14

21
5"

"M"
7 11 6

(NOTE 1) 15 16 (NOTE 2)

18 STAND HEIGHT
17 (NOTE 3) VARIES PER
PROJECT
REQUIREMENTS
22

19 (NOTE 4)

"D4" (4) "E5" DIA. HOLES "B2"


FOR "F6" DIA. BOLTS
"C3" "A1"

FRONT VIEW RIGHT SIDE


1. Mounted at dim. "H" (top of tank) on non-packaged units.
2. Tank mounted on non-packaged units.
3. Packaged units only. Mounted on front of stand.
4. Suction piping includes strainer, gate valve and flexible connector.
5. All couplings are 3000# F.S.
6. All flanges are 150# F.F. except as noted.
7. SM-200 is the same as SM-100 and SM-280 is the same as SM-140 except 2 water & steam inlets are used per vessel (dual inlet).
8. Customer to plug all fittings not being used.
9. Mount tank above pump at elevation necessary for static head including safe allowance for piping friction as approved by pump manufacturer.
10. Deaerator tank is built to ASME Code.
11. Accompanying dimensions, while sufficiently accurate for layout purposes, must be confirmed for construction by certified dimension prints.
12. Add Suffix "P" to Model No. for packaged units (SMP-45).
13. Optional tanks available for 5 minutes storage (except SM7 & SM15), other combinations of capacities as required - contact your local Cleaver-Brooks
authorized representative.
14. Dimension "B" will change depending on controls required - contact your local Cleaver-Brooks authorized representative.
15. No interconnecting piping or wiring furnished on non-packaged units unless specified, contact your local Cleaver-Brooks representative for specific piping
or wiring furnished on packaged assemblies.
16. Weights shown are without controls or packaging - contact your local Cleaver-Brooks representative for additions.
17. Capacities other than shown as standard available by proper selection of controls - contact your local Cleaver-Brooks authorized representative.
18. Optional tank sizes and ratings available - contact your local Cleaver-Brooks authorized representatives.
19. Lifting lugs are for lifting empty tank only.

RATINGS SM TANK
Capacity (Gal. to Overflow) 230 300 450 600 700 900 1000 1400 2000 2800 4000 5600
Tank Weight (Dry) (lb) 1050 1700 2150 2200 2450 2600 2800 4100 4900 5700 7300 9450
Tank Weight (Flooded) (lb) 3600 7850 10700 11750 13450 15500 17000 25450 33650 41550 52500 73600
Tank Size (Dia x Length) 36 x 71 48 x 96 48 x 134 54 x 118 54 x 136 60 x 129.5 60 x 142.5 66 x 177 72 x 200 84 x 184 96 x 179 108 x 199
TANK DIMENSIONS
A Overall Height 58 70 70 76 76 82 82 88 94 108 120 132
B Overall Width 51 63 63 69 69 75 75 81 87 99 111 123
C Front Head 8 10 10 11 11 12 12 14 15 17.5 20 21.5
D W ater Inlet - SM 7 17.5 N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A
W ater Inlet - SM 15 thru 100 N/A 20 22 22 22 22 22 22 22 22 22 22
W ater Inlet - SM140 N/A N/A N/A N/A N/A N/A N/A 18 18 18 18 18
E Steam Inlet 6.5 40 42 42 42 42 42 42 42 42 42 42
F Level Alarm 32 50 54 54 54 54 54 56 56 56 56 56
G High Temperature Return 27 55 62 62 62 62 62 63 63 63 63 63

2
Spraymaster Dimensions and Ratings

Figure 1b. Spraymaster Dimensions (sheet 2 of 2)


H Level Control 44.5 60 79 79 79 79 79 90 90 90 90 90
J Relief Valve 38.5 66 * 70 70 70 70 70 100 100 100 100 100
K Relief Valve 50 66 * 86 86 86 86 86 111 111 111 111 111
L Relief Valve N/A N/A N/A N/A N/A N/A N/A 122 122 122 122 122
M Drain 10 30 98 84 98 93 103 135 153 135 127 144
N Overflow 5 10 10 10 10 10 10 14 14 14 14 14
P Overflow 10 0 0 3.75 3.75 6.75 6.75 6.5 8 14.5 26.5 27.5
Sprayhead SM15 SM30 SM45 SM70 SM100/200 SM140/280
R Manual Vent Valve Size 0.75 0.75 0.75 1 1.5 2
STAND DIMENSIONS
Capacity (Gal. to Overflow) 230 300 450 600 700 900 1000 1400 2000 2800 4000 5600
A1 Overall Length 52.5 74 108.5 92.5 108.5 101 108.5 144 162 149 134 151
B2 C/L to C/L Bolt Holes 47.5 69 102.5 87.5 102.5 95 102.5 138 155 146 127 144
C3 Overall Width 49 62 66 64 66 71 71 76 83 86.5 102 113
D4 C/L to C/L Bolt Holes 46 59 63 61 63 68 68 73 80 79.5 99 110
E5 Hole Size 0.75 1 1 0.75 1 1.125 1.125 1.25 1.125 1.125 1.125 1.25
F6 Anchor Bolt Size 0.625 0.875 0.875 0.625 0.875 1 1 1.125 1 1 1 1.125
CONNECTIONS AND TRIM
1 Relief Valve Size Contact Your Local Cleaver-Brooks Authorized Representative
2 Overflow Size 1.5" NPT 3" NPT 3" NPT 3" NPT 3" NPT 3" NPT 3" NPT 4"-150# FF 4"-150# FF 4"-150# FF 6"-150# 6"-150# FF
FF
3 Steam Inlet Size See Table Below
4 Water Inlet Size See Table Below
5 High Temperature Return Size 1.5" NPT 1.5" NPT 2" NPT 2" NPT 2" NPT 2" NPT 2" NPT 3" NPT 3" NPT 3" NPT 3" NPT 3" NPT
6 Drain Size 1.5" NPT 2" NPT 2" NPT 2" NPT 2" NPT 2" NPT 2" NPT 2" NPT 2" NPT 2" NPT 2" NPT 2" NPT
7 Suction Size 2.5" NPT 2.5" NPT 2.5" NPT 2.5" NPT 2.5" NPT 2.5" NPT 2.5" NPT 4"-150# FF 4"-150# FF 4"-150# FF 4"-150# 4"-150# FF
FF
8 Thermometer (3/4" NPT)
9 Sample (1/2" NPT)
10 Chemical Feed (1" NPT)
11 Recirculation (1" NPT)
12 Gauge Glass Assembly
13 Level Controller (1.5" NPT)
14 Make-Up Valve
15 Pressure Gauge
16 Thermometer
17 Control Panel (Optional)
18 Feed Pump/Motor (Optional)
19 Suction Piping (Optional)
20 Manway Size - SM 7 20" N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A
Manway Size - SM 15 thru 70 N/A 28" 28" 28" 28" 28" 28" 28" 28" 28" 28" 28"
Manway Size - SM100, 200 N/A 32" 32" 32" 32" 32" 32" 32" 32" 32" 32" 32"
Manway Size - SM140, 280 N/A N/A N/A N/A N/A N/A N/A 36" 36" 36" 36" 36"
21 Level Alarms (Optional) (1" NPT)
22 Overflow Drainer (Optional)
RATINGS for
SPRAYMASTER MODEL TANK SIZES RATING (lb/hr) Conn 3 Steam Inlet Conn 4 Water Inlet
SM-7 230 7000 3"-150# FF Flg 1" NPT
SM-15 300 thru 700 15000 6"-150# FF Flg 1.5"-150# RF Flg
SM-30 300 thru 5600 30000 6"-150# FF Flg 2"-150# RF Flg
SM-45 300 thru 5600 45000 6"-150# FF Flg 2"-150# RF Flg
SM-70 300 thru 5600 70000 6"-150# FF Flg 2.5"-150# RF Flg
SM-100 300 thru 5600 100000 6"-150# FF Flg 3"-150# RF Flg
SM-140 2000 thru 5600 140000 8"-150# FF Flg 4"-150# RF Flg (2)
SM-200 (NOTE 7) 2000 thru 5600 200000 6"-150# FF Flg 3"-150# RF Flg
SM-280 (NOTE 7) 2000 thru 5600 280000 8"-150# FF Flg 4"-150# RF Flg (2)

* 2 relief valve tappings for SM 300 located at 66" are offset 6" on either side of top centerline.

3
Dimensions and Ratings Spraymaster

e-mail: [email protected]
4 Web: http://www.cleaverbrooks.com

You might also like