Product Information: Multi-Silicone Grease

PRODUCT INFORMATION
OKS 1110
Multi-Silicone Grease
Description
Highly adhesive transparent silicone grease for fittings, seals and plastic parts.
Applications Advantages and benefits

▪ Sealant and lubricant for cold and hot-water valves in ▪ NSF H1 registered
vehicle heating systems or cooling circuits and for ground ▪ Tasteless and odourless
seals on glass taps and desiccators
▪ Highly effective due to excellent adhesion on all materials
▪ Lubrication of O-rings and rubber seals for assembly and
▪ Neutral behaviour with regard to plastics and elastomers
during operation
▪ Completely EPDM-compatible
▪ Lubrication of plastic parts
▪ High long-term stability without drying out, hardening or
bleeding
Branches
▪ Resistant to cold and hot water, as well as acetone, ethanol,
▪ Plant and machine (tool) engineering ethylene glycol, glycerine and methanol
▪ Logistics ▪ MOSH/MOAH-free
▪ Iron and steel industry
▪ Chemical industry
▪ Shipbuilding and marine technology
▪ Paper and packaging industry
▪ Rail vehicle technology
▪ Catering equipment and food processing technology
▪ Rubber and plastic processing
▪ Municipal services
▪ Glass and foundry industry
Application tips
Clean the lubricating points well for optimal effect. Apply the grease evenly and thinly to the functional surfaces with a brush,
spatula, etc. Avoid excesses. In as far as available, observe the machine manufacturer's instructions. Assess the lubrication
frequency and quantity on basis of service conditions. Only mix with suitable lubricants. Caution: Plastic based on silicone, such as
silicone rubber can be attacked by silicone grease. Silicone grease may not be used at sliding points under pure oxygen influence.
30.07.2019, En Page 1/3
© OKS Spezialschmierstoffe GmbH

PRODUCT INFORMATION
OKS 1110
Packaging
▪ 10 ml Tube ▪ 400 ml Cartridge ▪ 500 g Can ▪ 5 kg Hobbock ▪ 180 kg Drum
▪ 80 ml Tube ▪ 4 g Tube ▪ 1 kg Can ▪ 25 kg Hobbock
Technical Data
Standard Conditions Unit Value
Main components
base oil polydimethylsiloxane
thickener inorganic
Application related technical data
marking DIN 51 502 DIN 51 825 MSI3S-40
viscosity at (40°C) DIN 51 562-1 base oil mm²/s 9,500
viscosity at (100°C) DIN 51 562-1 base oil mm²/s 3,800
drop point DIN ISO 2176 °C without
consistency DIN 51 818 DIN ISO 2137 NLGI grade 3
unworked penetration DIN ISO 2137 0.1 mm 180-210
flow pressure DIN 51 805 -40°C < 100
flow pressure DIN 51 805 20°C 50
percent in
oil separation DIN 51 817 18h/40°C 0.86
weight
percent in
oil separation DIN 51 817 168h/40°C 3.46
weight
resistance to oxidation DIN 51 808 100h/99°C bar < 0.3
lower operating temperature °C -40
upper operating temperature °C 200
colour transparent
density (at 20°C) DIN EN ISO 3838 g/cm³ 0.96
water resistance DIN 51 807-1 90°C Degree 0-90
SKF-EMCOR DIN 51 802 corr. degree 3-4
Product specific technical data
percent in
evaporation loss DIN 58 397-1 30h, 200°C < 2.5
weight
Properties and approvals
approval for food processing technology NSF H1, Reg.-Nr. 124381
drinking water approval UBA guideline (D) test certificate KA 0432/15
ACS-conformity to positive
drinking water approval test certificate 17 CLP NY 015
lists (F)
approval of the BPV
beer foam compatibility
Weihenstephan
30.07.2019, En Page 2/3

PRODUCT INFORMATION
OKS 1110
OKS Spezialschmierstoffe GmbH The information in this publication reflects state-of-the-art technology, as well as extensive testing and experience.
Due to the diversity of possible applications and technical realities, they can only serve as recommendations and are
not arbitrarily transferable. Therefore, no obligations, liability or warranty claims can be derived from them. We only
Ganghoferstraße 47 accept liability for the suitability of our products for particular purposes, and for certain properties of our products,
in the event that we have accepted such liability in writing in the individual case. Any case of justified warranty claims
82216 Maisach shall be limited to the delivery of replacement goods free of defects, in the event that this subsequent improvement
Phone: +49 (0) 8142 3051 - 500 fails, to reimbursement of the purchase price. Any and all further claims, in particular the liability for consequential
injuries or damage, shall always be excluded. Prior to use, the customer must conduct its own testing to prove
[email protected] suitability. The data are subject to change for the sake of progress. ® = Registered trademark
www.oks-germany.com Safety data sheet for industrial and commercial users is available for downloading under www.oks-germany.com.
Our Customer and Technical service will be pleased to help should you have any further questions.
30.07.2019, En Page 3/3

Product Information: Multi-Silicone Grease

Uploaded by

Copyright:

Available Formats

Product Information: Multi-Silicone Grease

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Product Information: Multi-Silicone Grease

Uploaded by

Copyright:

Available Formats

PRODUCT INFORMATION

Applications Advantages and benefits

30.07.2019, En Page 1/3

© OKS Spezialschmierstoffe GmbH

30.07.2019, En Page 2/3

© OKS Spezialschmierstoffe GmbH

30.07.2019, En Page 3/3

© OKS Spezialschmierstoffe GmbH

You might also like