EZP2019+ User Manual
EZP2019+ User Manual
features
Product picture:
Field of application:
This programmer can read and write the bios chips of DVD,TV,PC,harddisk,etc.
Features:
1. USB 2.0 interface, the speed is 12Mbps.
2. The speed of reading and writing is fast.
3. Auto detect chip modles.
4. Auto select power votage.
5. Surpport 25 FLASH, 24 EEPROM, 25 EEPROM, 93 EEPROM,etc.
6. Small shape.
7. Windows XP, Windows Vista, Win7,WIN8,WIN10.
List:
1. Programmer 1
2. Usb cable 1
3. CD 1
4. Manual(a file on CD) 1
5. Simple socket for SMD chips 2
EZP2019+ programmer manual
driver setup
There are tow usb device driver files: installer_x64.exe or install_x86.exe
Run the “*.exe”;The step of usb driver setup is same as other usb devices.
If the automatic installation does not success(Eg:WIN8/WIN10), you can also choose to
install USB driver from Device manager.
or
Right click---à update the driver, then chose “Browse my computer for driver software”
1. Browse to the” ../EZP2019+ ver2.0/driver”file( copy the software from
the CD to the computer first); And click the next.
2. Some computers may display the following prompt, please select "always
install driver“
3. One of the following figures appears, indicating that the driver is
installed
or
User can select chip modle from "Type", "Manu" and "Chip" combox.
User can click "Search" to select chip modle too.
EZP2019+ programmer manual
search chip
Click "find", then pop the above dialog, enter the keyword, the matched chips will be
listed in the listbox.
EZP2019+ programmer manual
detect chip
Click "Detect", the software will pop a messagebox to show chip name.
The programmer only can detect 25 series spi flash.
Note: Some 8M or more chips are detect ID unstable. recommended to select the chip
manually. In addition, if some errors when reading and writing, please to lower the
speed(see the picture below).
EZP2019+ programmer manual
open file
Click"OPEN”, or
or
1. Verify error.