Nail Care

Republic of the Philippines
DEPARTMENT OF EDUCATION
K to 12 Basic Education Curriculum

Technology and Livelihood Education
Learning Module
BEAUTY CARE
(NAIL CARE) SERVICES
EXPLORATORY COURSE
Grades 7 and Grade 8
TABLE OF CONTENTS
Page
What is this Module About?.................................................................................2
How do you Use this Module?............................................................................3
LESSON 1 – Use of Nail Care Tools and Equipment.............................4 - 35
LESSON 2 – Maintain Tools and Equipment........................................36 - 61
LESSON 3 – Practice Occupational Health and Safety Procedure...........62 - 89
LESSON 4 – Practice Basic Nail Designs.............................................90 - 113
Answer Keys.........................................................................................114 - 120
Acknowledgment............................................................................................121
BEAUTY CARE (NAIL CARE) SERVICES

K to 12 – Technology and Livelihood Education 1
What Is This Module About?
Welcome to the world of Beauty Care (Nail Care) Services!
This Module is an exploratory course which leads you to Beauty Care (Nail Care)
Services National Certificate Level II ( NC II)1. It covers 4 common competencies that a Grade 7
/ Grade 8 Technology and Livelihood Education (TLE) student like you ought to possess, namely:
1) Use of Nail Care Tools and Equipment;

2) Maintain Tools and Equipment;
3) Practice Occupational Health and Safety Procedure; and
4) Practice basic nail designs
These 4 common competencies are covered separately in 4 Lessons. As shown below, each
Lesson is directed to the attainment of one or two learning outcomes:
Lesson 1 – Use of Nail Care Tools and Equipment

LO1. Prepare the necessary tools and equipment for the specific nail care
activity.
LO2. Use nail care tools and equipment.
Lesson 2 – Maintain Tools and Equipment

LO1. Check condition of nail care tools and equipment
LO2. Perform basic preventive and corrective maintenance
LO3. Store nail care tools and equipment
Lesson 3 – Practice Occupational Health and Safety Procedure

LO1. Identify hazards and risks
LO2. Evaluate and control hazards and risks
Lesson 4 – Practice basic nail designs

LO1. Identify nail structure, shapes and nail diseases/disorders
LO2. Create basic nail designs
1NATIONAL CERTIFICATE (NC) is a certification issued to individuals who achieved all the required units of competency for a
national qualification as defined under the Training Regulations. NCs are aligned to specific levels within the PTQF. (TESDA Board
Resolution No. 2004-13, Training Regulations Framework)
NATIONAL CERTIFICATE LEVEL refers to the four (4) qualification levels defined in the Philippine TVET Qualifications Framework
(PTQF) where the worker with:
a. NC I performs a routine and predictable tasks; has little judgment; and, works under supervision;
b. NC II performs prescribe range of functions involving known routines and procedures; has limited choice and complexity
of functions, and has little accountability;
How Do You Use This Module?
This Module has 4 Lessons. Each Lesson has the following:
 Learning Outcome/s
 Performance Standard
 Materials /Resources
 Definition of Terms
 What Do You Already Know?
 What Do You Need to Know?
 How Much Have You Learned?
 How Do You Apply What You Have Learned?
 How Well Did You Perform?
 What is your Score?
 References
To get the most from this Module, you’ve got to do the following:
 Begin by reading and understanding the Learning Outcome/s and Performance
Standard/s. These tell you what you should know and be able to do at the end of this
Module.
 Find out what you already know by taking the Pretest then check your answer based
on the Answer Key. If you get 99 to 100% of the items correctly, you may proceed to
the next Lesson. This means that you have no need to go through the Lesson
because you already know what it is supposed to teach you. If you failed to get 99
to 100% of the items correctly, repeat the Lesson and review especially those
items which you failed to get.
 Do the required Learning Activities. It begins with one or more Information Sheets.
An Information Sheet contains important notes or basic information that you need to
know.
After reading the Information Sheet , test yourself on how much you learned way
of the Self-check. Refer to the Answer Key for correction. Do not hesitate to go back
to the Information Sheet when you do not get all test items correctly. This will
ensure your mastery of basic information.
 It is not enough that you acquire content or information. You must be able to
demonstrate what you learned by doing what the Activity / Operation /Job Sheet
directs you to do. In other words, you must be able to apply what you learned in real
life.
 How well did you perform? Accomplish the Scoring Rubrics.
Each Lesson also provides you with references and definition of key terms for your guide.
They can be of great help . Use them fully.
If you have questions, don’t hesitate to ask your teacher for assistance
LESSON 1
Use of Nail Care Tools and Equipment
LEARNING OUTCOMES:
At the end of this Lesson, you are expected to do the following:
LO 1. Prepare the necessary tools and equipment for the specific nail care activity; and
LO 2. Use nail care tools and equipment.
Definition of Terms
Bevel - a term in manicuring and pedicuring that means to shape the edge of something
Dispose of - to throw away
Hygiene - the science concerned with maintaining good health and cleanliness
Implements - articles or tools used in manicuring that are durable
Infection - a condition caused by a germ or a pathogen
Pathogen - a microbe or microorganism such as a virus, bacterium, prion, or fungus that

causes disease
Sterilization - a term referring to any process that eliminates (removes) or kills all forms of
microbial life
Radiation - a process in which energy is transmitted in the form of waves or particles that
can
be used to destroy micro-organisms
Disinfectant - an agent, such as heat, radiation, or a chemical, that destroys, neutralizes, or

prevents the growth of disease-carrying microorganisms
Antiseptic - a substance, milder than a disinfectant, that prevents the growth and
development
of micro-organisms
Cuticle - the nonliving epidermis that surrounds the edges of the fingernail or toenail
Moisten - make wet or damp
Nail bed - the portion of the skin upon which the nail plate rests
Effleurage - a French word meaning "to skim" or "to touch lightly on", is a series of massage
strokes used in Swedish massage to warm up the muscle
Spa - a beauty care service where curative minerals are present for beautification
Hand Spa - a beauty care service using natural oils, vitamins and minerals, having curative
effect to the body
Paraffin - a waxy white or colorless solid hydrocarbon mixture used to make candles, wax
paper, lubricants, and sealing materials
Foot Spa - a beauty care service offered by salons to relax and moisturize the feet
LEARNING OUTCOME 1
Prepare the necessary nail care tools and equipment for the specific nail care activity.
PERFORMANCE STANDARDS

ols and equipment are prepared based on salon procedure and policies. Tools and equipment are identified and checked according to t

Materials
 Hand tools, equipment and specifications

 Tools condition report forms
 Workplace/simulated environment
What Do You Already Know?

Let us determine how much you already know about the use of nail care tools and equipment. Take this test.
Pretest LO 1
Directions: Choose the letter of the correct answer. Write your answer on a separate sheet.
1. A tool that is used to push back or loosen the cuticles.

a. Cuticle remover c. Cuticle nail pusher
b. Nail File d. Emery board
2. An implement that is used to shape the free edges of the nail with the coarse side
and bevel the nail with the finer side.
a. Nail Cutter c. Nail Trimmer
b. Nail File d. Nail Buffer
3. The equipment which is used to sanitize or kill bacteria or micro-organisms in metal
implements.
a. Hand Spa Machine c. Solvent
b. Buffer d. Sterilizer
4. The implement with pointed and rounded ends to remove excess polish.
a. Orangewood Stick c. Nail Buffer
b. Nail File d. Emery board
5. The electronic gadget which is used to soothe pain of arthritis, muscle spasms and
dry skin of the hands.
a. Sterilizer c. Hand Spa Machine
b. Foot Spa Machine d. Manicure Table
6. It is used to: smooth out ridges on the nails ,give nails a healthy shine and remove
any surface stain.
a. Sterilizer c. Nail file
b. Buffer d. Orangewood stick
7. A type of volcanic rock used to remove callouses.

a. Foot spa basin c. Pumice stone
b. Foot spa tray d. Cotton
8. It is a wheeled cart that is pushed by hand and used for transporting manicuring and
pedicuring tools and materials.
a. Trolley c. Manicure tray
b. Supply tray d. Foot file
9. It is an organic compound used as sanitizer in nail salons.

a. Base coat c. Alcohol
b. Top coat d. Cuticle solvent
10. It is a clear polish applied to the nail plate before the application of colored polish.
a. Base coat c. Alcohol
b. Top coat d. Cuticle solvent
What Do You Need To Know?
Read the Information Sheet 1.1 very well then find out how much you can remember and how much you learned by doing Self-che
Information Sheet 1.1
NAIL CARE TOOLS AND EQUIPMENT
TOOLS are the articles used in any nail care service which are durable or permanent and
are hand-held. Tools are also referred to as implements.
The tools commonly used in giving manicure and pedicure are the following:
Callous Remover is a tool designed

to strip off calluses and corns.
Cuticle Nail Pusher is a tool used to push

back and loosen the cuticles.
Cuticle Nipper is an implement

used to cut the cuticles.
Cuticle Scissor is an implement

to cut stubborn cuticles.
Finger or Manicure Bowl is a small bowl
used for soaking the fingers to soften
the cuticles.
Foot file is made of metal or sandpaper,

with a rough file on one side to remove
calluses and a fine file on the other to
smoothen the feet.
Foot Spa Basin is a large rectangular

container used for bathing and soaking
the feet when giving a pedicure.
Manicure Tray is a flat container where all

the necessary tools and implements
are placed for use by the manicurist.
Manicure Nail Brush is a plastic handled

brush with nylon bristles used to clean
dirt and cosmetic residue from the nail
surface and skin.
Mixing bowl is a small open-top, rounded

cup-like container used for mixing the
aromatic oils and other fluids for the hand
or foot spa.
Nail Buffer is an implement used for
smoothening and polishing the nails.
Nail Cutter / Nail Clipper / Nail Trimmer

is a hand tool made of metal used to trim
fingernails and toenails.
Nail File is an implement used to shape the

free edges of the nail with the coarse side
and bevel the nail with the finer side.
Orangewood Stick is an implement with

pointed and rounded ends to remove
excess polish.
Pedicure Nail Brush is a tool used to

remove cosmetics and cleanse nails.
Plastic Container for Cotton is a small

receptacle where cotton balls are put.
Pumice Stone is a type of volcanic rock,
which is actually frothy lava solidified to
form a porous rock to remove dry and
annoying skin of the feet as well as calluses.
Supply Tray is a flat container that holds the

necessary cosmetics and implements.
Trolley is a wheeled cart that is pushed by

hand and used for transporting manicuring
and pedicuring tools and materials.
MATERIALS are the cosmetics and supplies that are consumed and should be replaced
from time to time. They are also called consumables.
The following are the materials used in giving manicure, pedicure, hand and foot spa:
Alcohol is an organic compound used as sanitizer.

Antiseptic Solution is an agent that reduces
or prevents the multiplication of micro-
organisms.
Apron is an outer protective garment that covers

primarily the front of the body to protect
clothes from dirt or stains.
Assorted Colored Nail Polish is a lacquer applied

on fingernails and toenails to decorate and/or
protect the nail plate.
Base Coat is a clear layer of polish applied to the

nail plate before the application of colored polish
to smoothen surface for color and promote
healthier nails.
Benzalconium Chloride is a yellow-white powder

prepared in an aqueous solution used as
surface disinfectant and topical antiseptic.
Bleaching Soap is a soap formulated to

whiten the skin.
Cling Wrap is a thin plastic film used for
sealing the paraffin during a hand spa.
Cotton is a soft white downy fiber for dubbing

or cleaning the nails and removing nail polish.
Cuticle Oil is a mixture of fats and waxes

containing lanolin and petroleum base to
soften and lubricate the skin around the nails.
Cuticle Remover is a liquid used to soften nail

cuticles and prepare them to be cut.
Disinfectant is an agent, such as heat, radiation,

or a chemical, that destroys, neutralizes, or
prevents the growth of disease-carrying microorganisms.
Emery board is a wooden, sand paper-like stick with

a fine texture on one side and a coarse texture on
the other side used to gently grind down the edges
of the nails.
First Aid Kit is a collection of supplies for use in
giving first aid.
Foot Blush is a liquid spray that contains peppermint

and alpha hydroxyl acids derived from fruits that
whisks away dead skin cells, deodorizes and soften
the feet, giving it a pinkish glow after use.
Foot Soak is an herbal blend to relax, energize,

soothe and deodorize the feet.
Foot Scrub is a mixture of natural ingredients to

keep feet soft, smooth and moisturized.
Garbage bins/bags are plastic disposable bags

or trash receptacles used to contain rubbish
to keep the place clean.
Hand Towel is an absorbent cloth for drying the hands.

Lotion is any of various cosmetic preparations
that are applied to soften the skin.
Manicure pillow is a hand cushion that helps a

client to keep her hands steady and relaxed.
Nail Hardener is a liquid applied to the nails to form

a protective barrier to prevent chipping, peeling
and splitting of nails.
Nail Polish Remover (Acetone) is an organic solvent

used to dissolve old polish on nails.
Quick Dry is a liquid applied to colored nail polish

to dry faster.
Solvent is a substance used to thin out the nail
polish when it has thickened.
Toe Nail Separator is a soft material where toes are

inserted to keep them apart to prevent a
freshly painted toenail from staining another
toe.
Top Coat is a clear nail polish applied to the nails

after the colored polish to protect it from scratches
and chips, it makes nails harder and keep them
looking shiny.
Towel is an absorbent cloth for drying the hands

and feet.
Wet Sanitizer is a substance or preparation for

killing germs.
EQUIPMENT are the items which are more or less durable and permanent needed for a
particular activity or purpose.
These are the equipment and furniture or fixtures that are used in a salon:
Chairs are seats with back support which have

four legs and some have rests for the arms.
Foot Spa Machine is an electronic gadget used for

soaking, bathing and massaging the feet during a foot spa.
Foot Spa Stool is a simple seat with three or four legs

designed to provide comfort and elevation during
a foot spa.
Hand Spa Machine is an electronic gadget used to

soothe pain of arthritis, muscle spasms and dry
cracked skin of the hands.
Manicurist’s Chair or Stool is the adjustable

upholstered seat fitted over a metal or chrome.
Manicure Table is a furniture especially designed

for giving manicure. Usually it has a laminated
plastic surface and a drawer for storing materials.
It is often fitted with ball casters for easy mobility.
Sterilizer is an equipment in a salon used for sterilizing
metal implements to kill micro-organisms.
Timer is a device that can be preset to start or

stop something at a given time.
How Much Have You Learned?
Self-Check 1.1
Read the questions carefully. Write the answer on a separate sheet of paper.
1. What do we call the tool that is used to push back or loosen

the cuticles?
2. What implement is used to shape the free edges of the nail

with the coarse side and bevel the nail with the finer side?
3. What hand tool is made of metal and is used to trim

fingernails and toenails?
4. How do we call the implement used for smoothening and .

polishing the nails?
5. How is a wooden, sand paper-like stick with a fine texture on

one side and a coarse texture on the other side used to
gently grind down the edges of the nails called?
6. How do we call the implement with pointed and rounded

ends to remove excess polish?
7. What electronic gadget is used for soaking, bathing and

massaging the feet during a foot spa?
8. What do we call the equipment in a salon that is used for
sterilizing metal implements to kill micro-organisms?
9. How do we call the simple seat with three or four legs

designed to provide comfort and elevation during a foot
spa?
10. What electronic gadget is used to soothe pain of
arthritis, muscle spasms and dry cracked skin of the hands?
Refer to the Answer Key. What is your score?
How Do You Apply What You Have Learned?
Show that you learned something by doing this activity
Activity Sheet 1.1
I. Identification of Tools and Equipment According to Task Requirement
Materials, Tools and Equipment
Tools Materials Equipment

Callous Remover Alcohol Chairs
Cuticle Nail Pusher Antiseptic Solution Foot Spa Machine
Cuticle Nipper Apron Hand Spa Machine
Cuticle Scissor Assorted Nail Polish Foot Spa Stool
Finger or Manicure Bowl Base Coat Manicurist’s Stool
Foot File Benzalconium Chloride Manicure Table
Foot Spa Basin Bleaching Soap Sterilizer
Foot Spa Tray with Handle Cling Wrap Timer
Manicure Tray Cotton
Manicure Nail Brush Cuticle Oil
Mixing Bowl Cuticle Remover
Nail Buffer Disinfectant
Nail Cutter/Clipper/Trimmer First Aid Kit
Nail File Foot Blush
Orange Wood Stick Foot Soak
Pedicure Nail Brush Foot Scrub
Plastic Container for Cotton Garbage Bags/Bins
Pumice Stone Hand Towel
Trolleys Emery board
Lotion
Manicure Pillow
Nail Hardener
Nail Polish Remover
Quick Dry
Solvent
Toe Nail Separator
Top Coat
Wet Sanitizer
Instructions:
You are given different materials, tools and equipment. Group all the materials, then all
the tools and the third group, equipment.
II. Procedure:
1. Identify the tools, materials and equipment which are used in giving:
A. Manicure and Pedicure

B. Hand Spa
C. Foot Spa
2. Check the tools, materials and equipment for proper operation as per
safety practices.
3. Gather all the materials in the shop or laboratory. Classify all those unsafe for use
and mark “S”; those unsafe for use, mark “U” and those for repair, “R”.
How Well Did You Perform?
Find out by accomplishing the Scoring Card honestly and sincerely. Remember it is your at stake!
DIRECTIONS:
Evaluate yourself by checking the appropriate boxes to indicate the degree of

competency in nail care tools and equipment.
Criteria 15 10 5 Score
Identify nail care tools, materials and equipment .
Demonstrate knowledge on the safety practices of
nail care tools, materials and equipment.
Classify nail care tools and equipment according
to their standards of used
Total
Rating Scale:
15 - The student consistently perform tasks to standards with no supervision

10 - The student can perform the tasks with limited supervision
and/or does not perform the task to standard .
5 - The student can perform the tasks with direct supervision.
Activity Sheet 1.2
I. Prepare the necessary tools, materials and equipment for the specific nail care
services.
Tools Materials EQUIPMENT

Lotion
Manicure Pillow
Nail Hardener
Nail Polish Remover
Quick Dry
Solvent
Toe Nail Separator
Top Coat
Wet Sanitizer
Instructions:
Given the materials, tools and equipment, demonstrate how to prepare them.
Activity Sheet 1.2
I. MANICURE
II. PEDICURE
III. HAND SPA

IV. FOOT SPA
Find out by accomplishing the Scoring Rubric honestly and sincerely. Remember it is your learning at stake!
Rubric for Performance

Highly Moderately
Skilled Unskilled No Attempt
Skilled Skilled
4 2 1
Dimension 5 3
Appropriate Appropriate Appropriate Never selects, No attempt to
selection, selection, selection, prepares and use tools/
preparation preparation preparation use equipment
Use of tools,
and use of and use of and use of appropriate
equipment and
materials and materials and materials and materials and
materials
tools/ tools/ tools/ tools/equipment
equipment all equipment equipment
(20%)
the time most of the some of the
time time
Systematic Systematic Systematic Never follows No attempt to
application of application of application of systematic apply
procedures all procedures procedures application of procedures to
Application of
the time most of the some of the procedures project/activity
Procedure
without time with time with and highly
(40%)
supervision minimum constant development
supervision supervision on supervision
Highly self- Self- Self-motivated Needs to be No motivation
Safety / Work motivated motivated and observes motivated and and totally
Habits and and sometimes does not disregards
(30%) observes all observes some safety observe safety precaution
safety most safety precautions precaution
precautions at precautions
all times most of the
time
Work finished Work finished Work finished Work finished No concept of
Speed / Time ahead of time meets close to way beyond time
(10%) deadline deadline deadline
Rating Scale
Weighted Score: = Score x Item (weight)
Score Percentage = Total weighted score x 30 + 70
Perfect score (5)
Example:
5 x 20% =1
5 x 40% =2
4 x 30% = 1.2
3 x 10% =0.3
Total weighted score =4.5

Score Percentage
= 4.5 x 30 + 70
5
Grade = 97
Note: If you want to consider a higher grade of your students adjust score percentage, you
can change it to 40 + 60.
How Do You Extend Your Learning?
I. Directions: After learning about the different tools, materials and equipment, with
your own sets of nail care tools, materials and equipment, classify them using
the grid below. Do this on a separate sheet of paper.
TOOLS MATERIALS EQUIPMENT

1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23
LEARNING OUTCOME 2
Use nail care tools and equipment
Tools and equipment are used according to task requirements.

Safety procedure of using tools and equipment are observed.
Materials
 Hand tools, equipment and specification
 Personal protective equipment (PPE)
 Workplace/simulated environment
Let us determine how much you already know about the use nail care tools and equipment. Take this test.
Pretest LO 2
Directions: Match the word in column A with its description in column B. Write the letter of
the correct answer on a separate sheet.
Column A Column B
1. Emery board a. an electronic gadget that is used in giving foot spa.
2. Nail buffer b. a tool that is used to give the nail a natural glow
3. Callous remover c. an implement that is used to bevel and smoothen
4. Foot spa machine the nail.
5. Cuticle nipper d. a tool that is used to remove callouses
6. Cuticle pusher e. it is used to remove nail polish
7. Foot scrub f. it is a soft material inserted to toes
8. Orangewood stick g. It is an implement with pointed and rounded ends
9. Acetone used to remove excess polish
10. Toe nail separator h. an implement used to push dead cuticle
i. it is a mixture of natural ingredients to keep feet soft
,smooth and moisturized
Read the Information Sheet 2.1 very well then find out how much you can remember and how much you learned by doing Self-chec
Nail Care, once considered as a luxury for the few or as a mark of distinction
between the rich and the poor, is now within the reach of the general public. In fact, part of a
person’s grooming and a form of inexpensive relaxation is a regular nail care activity – be it
manicure, pedicure, hand spa or foot spa.
The following shows the proper way of holding and handling some nail care tools
or implements and equipment.
MANICURE AND PEDICURE
Nail File
Hold the file firmly in the right or left hand
(as the case may be), with the thumb
underneath it for support and the other
four fingers on its upper surface. Place
the file slightly under the free edge and
file the nail from corner to center, shaping
the nail. Never file back and forth; this would
cause the nails to crack and split. Do not file
deep into the corners; this weakens the nails,
hurt the skin and cause ingrown nails.
Emery Board
It is held in the same manner as the
nail file. Bevel the rough surface
of the nail using the fine side to
smoothen it. Emery boards are discarded
after use on one person.
Orangewood Stick
It is held in the same manner as in writing
with a pencil. To loosen cuticle, work around
nail; for applying oil or solvent, slightly dip
the cotton-tipped orangewood stick and work
around the base of the nail; to clean under
the free edge of the nail, from the center toward
each side, with gentle pressure so that live tissue
at the root of the nail will not be injured.
Cuticle Nail Pusher

It is held in the same manner as in writing
with a pencil. The dull spade side is used
to push back and loosen the cuticles. Keep
cuticle moist using cuticle remover while
working. Use the cuticle pusher in a flat
position to remove dead cuticle adhering to
the nail without scratching the nail plate. In
using the pusher, avoid too much pressure to prevent injury on tissues.
Cuticle Nipper
Pick up the cuticle nipper by the handles
and turn the cutting edges towards you;
place the bent tip of the index finger over
the top of the shank. Place the thumb on
the side of the handle and the remaining
fingers over the opposite handle. Use it
with utmost care to remove dead cuticle
and hangnails so as not to injure live tissue
Nail Cutter
Hold clippers with cutting edges downward
between thumb, index and middle finger.
Press clipper handles by squeezing them
together and remove excess nail length.
Nail Brush
Insert the ring finger and pinky in the
nail brush handle and brush the nails
with a downward motion from the base
to the fingertips to clean the nails and
fingers.
Nail Buffer
Place the thumb and the ring finger under
the handle of the buffer while the index
and the middle fingers are on its top and
the pinky is on its side. Apply a small
amount of powder over the buffer then buff
the nails with downward strokes from the
base to the free edge of each nail until a
smooth clear gloss has been obtained.
Buffing helps in giving the nail natural gloss and
increases blood circulation to the finger tips. To
prevent heating and burning sensation, lift the
buffer from the nail after each stroke.
HAND AND FOOT SPA

Foot File
Start with the course side of the foot file.
Gently slide it back and forth across the ball
of your foot and the bottom the toes. Still with
the rough side of the file work mostly on the
outside rim of the heel. Flip the file over and
repeat the process with each foot. The fine side
will smoothen the skin and leave it feeling
polished.
Callous Remover
Insert the blade into the callous remover
with care. Lay the callous remover on the
top thick part of the callous. Do not lay the
blade above the area that is going to be cut,
as this may result in cutting the soft part of
the foot, resulting to open wound. Applying
light pressure with a steady hand on the
callous remover, gently glide it over the callous.
Repeat the process if necessary until the callous is thinner. Smoothen the
callous with a foot file.
Pumice Stone
After soaking the feet in warm soapy water,
use the pumice stone to gently buff away
cracked or dry skin of the feet with a soft,
circular motion. Never apply heavy pressure
to the pumice for this can cause sores, open
wounds and possible infection.
Hand and Foot Spa Machine
Make sure that electrical wirings are dry and protected from accidental water spillage.
Set the machine to the temperature that the client can withstand.
Learning to use tools and equipment properly assures you that you will give your client a
nail care service safely. You should carefully follow these tips if you want to achieve quality
service all the time.
PPE (Personal Protective Equipment)
Personal Protective Equipment are the garments designed to protect the wearer’s body
from injury or chemicals or for job-related occupational safety and health purposes.
Glove is a garment covering for the whole hand.
Smock gown is a loose cloak or robe worn

to protect the clothes.
Mask is a protective face covering for hygienic

purposes and to prevent the face from
chemical exposure.
Headband is a band of absorbent material worn
on or around the head across the forehead
to keep the sweat and the hair off the face.
Self-Check 2.1
I. Answer each question briefly.
1. Why should filing be done from the corners to the center of the nails?
2. Why is gentle pressure applied in using orangewood stick?
3. What effect does buffing have on the nails?
4. Why should a cuticle nipper be used with utmost care?
5. What would likely to happen if heavy pressure is applied when using a pumice
stone?
Operation Sheet 2.1
I. Demonstration on the proper use of nail care tools and equipment

Materials
Cuticle Remover Hand Towel First Aid Kit Antiseptic Solutions
Tools
Nail File Orangewood Stick Cuticle Nail Pusher Nail Cutter
Equipment
Foot Spa Machine
Procedure:
1. Demonstrate the proper use of the following tools:
a. Cuticle Nail Pusher
b. Nail File
c. Orangewood Stick
d. Nail Cutter
2. Show how to set the hand spa machine for use.
3. Act out how to set a foot spa machine for use.
II-A. Materials and Tools:
Materials
Cuticle Remover Cotton Hand Towel
Tools
Orangewood Stick Cuticle Nail Pusher
Instructions:
1. Apply cuticle remover to cuticle in one stroke. Spread it with a brush.
2. Allow to stand for 1 minute.
3. Hold orangewood stick tipped with cotton or cuticle nail pusher 2.5 cm from tip.
4. Starting at one side of the nail, gently begin to loosen the cuticle with a
rotating action. Work from one side of the nail to the other.
5. Using tip of the implement, remove matter from under the free-edge.
6. Using a cotton, carefully mold back skin, wiping off remaining cuticle remover.
III-B. Materials and Tools:
Materials
Antiseptic Solution Cotton First Aid Kit
Tools
Nail Cutter/Clipper
Instructions:
1. Adjust clipper in working position.
2. Turn client’s palm up.
3. Hold client’s finger upright between your thumb and fingers.
4. Hold clippers with cutting edges downward between thumb and index and middle
fingers.
5. Place nail plate between cutting edges, holding clipper to cut straight across nail
plate.
6. Gauge the desired length of nail (not shorter than 3mm).
7. Press clipper handles by squeezing handles together, and remove excess length.
Criteria Weight
Demonstrated the proper way of using all nail care
tools and equipment 15 pts.
Demonstrated the proper way of using most of the nail
care tools and equipment 10 pts.
Demonstrated the proper way of using some of the nail
care tools and equipment. 5 pts.
Failed to demonstrate the proper way of using nail care 1 pt.
tools and equipment
Rating Scale:
15 - Very Good
10 -Good
5 - Fair
1 –Needs Improvement
After learning how to use the different nail care tools and equipment properly, you will be
shaping the nail using the emery board on your own.
1. Hold emery board between thumb and index finger of the dominant hand.
2. Hold the client’s fingertip between thumb and index finger of auxiliary hand.
3. Position the emery board under the free edge of the nail.
4. Slide emery board across free edge to center of nail edge in one stroke. Work
from the corner to the center of the nail.
5. Place the emery board on the opposite side of the nail and repeat procedure.
6. Repeat until desired shape is achieved.
7. Check nail edge for rough spots. Bevel nail by lightly filing edge downward with the
fine side of the emery board.
When you are finished, check your work and then show it to your teacher for critiquing
Congratulations! You did a great job! Rest and

relax a while then move on to the next lesson.
Good luck!
REFERENCES
LO1
 Constance V. Standard Textbook of Cosmetology. Milady Publishing Corp: 1984
Kibbe,
Moore, Oakley and Franco. The World of Cosmetology. McGraw-Hill Book Company: 1980

LO 2

Nordmann, Lorraine, et. al. Beauty Therapy – The Foundation. Thomson Learning: 2001
Kibbe, Constance V. Standard Textbook of Cosmetology. Milady Publishing Corp: 1984

Moore, Oakley and Franco. The World of Cosmetology. McGraw-Hill Book Company: 1980

LESSON 2
Maintain tools and equipment
LEARNING OUTCOMES:
At the end of this Lesson you are expected to do the following:
O 1. Check condition of nail care tools and equipment; LO 2. Perform basic preventive and corrective
O 3. Store nail care tools and equipment.
Definition of Terms
Antiseptic - a substance, milder than a disinfectant, that prevents the growth and
development
of micro-organisms
Contaminated wastes - materials which are infected or with some measure of decay
Disinfectant - an agent, such as heat, radiation, or a chemical, that destroys, neutralizes, or

prevents the growth of disease-carrying microorganisms
Dispose of - to throw away
Foot Spa - a beauty care service offered by salons to relax and moisturize the feet
Hand Spa - a beauty care service using natural oils, vitamins and minerals, having curative
effect to the body
Hygiene - the science concerned with maintaining good health and cleanliness
Implements - articles or tools used in manicuring that are durable
Infection - a condition caused by a germ or a pathogen
Pathogen - a microbe or microorganism such as a virus, bacterium, prion, or fungus that

causes disease
Polythene - a kind of plastic commonly used as grocery bags, shampoo bottles, children’s
toys
among others
PPE (Personal Protective Equipment) - protective clothing designed to protect the

wearer’s body from injury or chemicals or for job-related occupational safety and
health purposes
Radiation - a process in which energy in transmitted in the form of waves or particles that
can
be used to destroy micro-organisms
Spa - a beauty care service where curative minerals are present for beautification
Sterilization - a term referring to any process that eliminates (removes) or kills all forms of
microbial life
LEARNING OUTCOME 1
Check condition of nail care tools and equipment
Procedures for sterilization and sanitation of nail care tools and equipment are followed
Non-functional tools and equipment are segregated and labeled accordingto classification.
Tools and equipment are safely stored in accordance with salon requirements and local health regulations.
Conditions of PPE are checked in accordance with manufacturer’s instructions
Materials
 Tools, equipment and specification
 Personal protective equipment (PPE)
Let us determine how much you already know about the use of nail care tools and equipment. Take this test.
Pretest LO 1
A. Multiple Choice
Directions: Choose the letter of the correct answer. Write your answer on a
separate sheet.
1. It is the process of destroying all living micro-organisms.

a. Sanitation c. Sterilization
b. Disinfecting d. Sanitization
2. It is the process of destroying some, but not all micro-organisms using heat or
antiseptics.
3. It is a substance used to control micro-organisms on non-living surfaces.

a. Antiseptic c. Disinfectant
b. Solvent d. Nail Hardener
4. It is an agent that prevents the multiplication of micro-organisms.

a. Antiseptic c. Disinfectant
b. Solvent d. Nail Hardener
5. It is the application of measures to promote public health and prevent the spread of
infectious diseases.
B. Essay
Directions: Briefly discuss the following questions
1. A strong emphasis is placed on sanitizing all implements and equipment. Why

is sanitizing so important in nail care?
2. Differentiate sanitation from sterilization.
he Information Sheet 1.1 very well then find out how much you can remember and how much you learned by doing Self-check 1.1.
Check condition of tools and equipment
It is important to assemble, sanitize and sterilize all the necessary items before
starting any nail care activity. Sanitation is the application of measures to promote public
health and prevent the spread of infectious diseases. The observance of safety rules in the
salon industry can be of great help in preventing accidents and injury to anyone in the salon.
What is meant by Sterilization? What is Sanitization?
Sterilization is the process of destroying all living micro-organisms. Sanitization is the

process of destroying some, but not all micro-organisms. Sterilization and sanitization
techniques which are being practiced in the beauty salon involve the use of physical agents
like heat and radiation; and chemical agents like antiseptics and vapor fumigants.
What is the difference between disinfectant and antiseptic?

A disinfectant is a substance used to control micro-organisms on non-living surfaces
such as tools, equipment, and furniture/ fixtures. An antiseptic is an agent that prevents the
multiplication of micro-organisms. Since it is milder than a disinfectant, it can be used directly
on the skin.
Preparation of Equipment to be Sanitized
a. Read directions on disinfectant.
b. Measure and mix disinfectant as directed.
c. Saturate a cleaning cloth with disinfectant solution and wipe entire surface area
of equipment.
d. Wipe the surface with paper towel to dry it.
e. Dispose of sanitizing solution and used towels.
Preparation of Metals Implements for Sterilization

a. Soak the tools/ implements in hot, soapy water solution to remove any debris and
oil residue. Rinse them thoroughly.
b. Place the tools/implements in a 70% to 90% alcohol solution for 20 minutes.
c. Remove the tools/implements from solution, wipe them dry, and place them into a
dry sterilizer.
Preparation of the Sanitizing Jar

a. Cleanse sanitizing jar with disinfectant and wipe it dry.
b. Place thin layer of sterile cotton at the bottom of jar.
c. Remove implements from wet or dry sanitizer and place them into the jar,
handles up, except for metal nail files.
d. Fill jar with 70% to 90% alcohol solution to cover cutting edges and tips
of orangewood sticks.
Keep in mind that all tools/implements and equipment should not be used unless
effectively sanitized or sterilized so as to prevent possible diseases and that all materials are
neatly organized on the trolley. All beauticians should maintain a high standard of personal
hygiene. Wherever possible, use disposable products.
Make sure that the client’s safety and comfort is ensured by using tools and
equipment which are in good condition and that he/she is provided with the appropriate
personal protective clothing.
Your goal is to give the highest professional nail care service to each client thus,
tools and equipment are checked thoroughly to identify those which function efficiently and
those which are not; Functional tools and equipment are stored safely in accordance with
salon requirements and local health regulations. Non-functional or faulty tools and
equipment are segregated and labeled properly either for repair or for discarding.
After every working session, the following should be done:

a. Tools which are made of plastic should be kept clean and sanitized properly
in preparation for the next patron.
b. Empty bottles and containers are discarded in a covered trash bin.

c. Used treatment products and other chemicals are stored, arranged and properly
labeled in the cabinet.
d. Finger bowls must be sanitized before use of every client.

e. The hand and foot spa machines must be flushed with a solution of about 5% bleach
and circulate the liquid through the system for at least 10 minutes.
f. Leave the solution in the hand and foot spa machines overnight or at least 5-10
hours before draining the machines so that they are thoroughly sanitized.
g. Table tops and door handles are wiped with disinfectant and the floor should be
mopped with disinfectant as well.
h. Metal tools and instruments must be sterilized following proper

sterilization techniques. After the process, store in a dry cabinet until
needed.
i. Tools/Implements which are made of porous materials such as nail files, buffers, nail
brushes and orangewood sticks can harbor bacteria easily. Since they are wood
products which cannot be sterilized, these tools should not be reused.
j. Waste materials should be disposed properly in an enclosed waste bin fitted with
polythene bag. The bin should be sanitized with disinfectant regularly in a well-
ventilated area. Remember to wear protective gloves while doing this.
k. Contaminated wastes should be disposed off as recommended by local authority.
l. Any tool or equipment in poor condition must be repaired immediately or disposed

properly so as not to pose danger to the clients as well as the beauticians
Self-Check 1.1
Directions: Write brief answers to the following questions:
1. How often does a beautician sanitize her hands?

2. How can you keep metal tools/implements clean after being sterilized?
3. How should waste materials be disposed? How about contaminated wastes?
4. Why is it important to observe safety rules in the salon?
5. When do we say that tools and equipment are in good condition? When do we say
that they are not?
Activity Sheet 1.1
I-A. Materials, Tools, Equipment and PPE

Materials Tools Equipment PPE
Alcohol Cuticle Nail Pusher Foot Spa Machine Gloves
Bleach Nail Cutter Hand Spa Machine Mask
Disinfectant Cuticle Nippers Sterilizer
Cleaning cloths Cuticle Scissors Foot Spa Stool
Metal File Manicure Table
Orangewood Stick Manicurist’s Stool
Procedure:
The students are grouped with 5 members each.
1. Simulate/Perform
a. Group 1 – Sanitize hand and foot spa machines
b. Group 2 – Sterilize metal tools/implements
c. Group 3 – Sanitize non-metal tools/implements
d. Group 4 – Sanitize environmental surfaces
e. Group 5 – Dispose waste materials and contaminated wastes
B. Tools and Equipment:
TOOLS EQUIPMENT
Callous Remover Chairs
Cuticle Nail Pusher Foot Spa Machine
Cuticle Nipper Hand Spa Machine
Cuticle Scissor Foot Spa Stool
Finger or Manicure Bowl Manicurist’s Stool
Foot File Manicure Table
Foot Spa Basin Sterilizer
Foot Spa Tray with Handle Timer
Manicure Tray
Manicure Nail Brush
Mixing Bowl
Nail Buffer
Nail Cutter/Clipper/Trimmer
Nail File
Orange Wood Stick
Pedicure Nail Brush
Plastic Container for Cotton
Pumice Stone
Trolleys
C. Instructions: Your group is given sets of tools and equipment:
1. Make a checklist of these tools and equipment following the format below.
TOOL GOOD CONDITION DEFECTIVE
1.
2.
3.
4.
5.
EQUIPMENT GOOD CONDITION DEFECTIVE

1.
2.
3.
4.
5.
2. Check each tool and equipment.
3. Identify which tool/s and equipment are functional and tick ( ∕ ) the GOOD
CONDITION column. Tool/s and equipment that are faulty, tick the DEFECTIVE
column.
4. Label the tools and equipment that are defective.
Let your teacher evaluate your work.
Rubric for Performance
Highly Skilled Moderately Unskilled No Attempt

Skilled 4 Skilled 2 1
Dimension 5 3
Appropriate Appropriate Appropriate Never selects, No attempt to
selection, selection, selection, prepares and use tools/
preparation preparation preparation use equipment
Use of tools,
and use of and use of and use of appropriate
equipment and
materials and materials and materials and materials and
materials
tools/ tools/ tools/ tools/equipment
equipment all equipment equipment
(20%)
the time most of the some of the
time time
Systematic Systematic Systematic Never follows No attempt to
application of application of application of systematic apply
procedures all procedures procedures application of procedures to
Application of
the time most of the some of the procedures project/activity
Procedure
without time with time with and highly
(40%)
supervision minimum constant development
supervision supervision on supervision
Highly self- Self- Self-motivated Needs to be No motivation
Safety / Work motivated motivated and observes motivated and and totally
Habits and and sometimes does not disregards
(30%) observes all observes some safety observe safety precaution
safety most safety precautions precaution
precautions at precautions
all times most of the
time
Work finished Work finished Work finished Work finished No concept of
Speed / Time ahead of time meets close to way beyond time
(10%) deadline deadline deadline
Rating Scale
Weighted Score: = Score x Item (weight)
Score Percentage = Total weighted score x 30 + 70
Perfect score (5)
Example:
5 x 20% =1
5 x 40% =2
4 x 30% = 1.2
3 x 10% =0.3
Total weighted score =4.5
Score Percentage
= 4.5 x 30 + 70
5
Grade = 97
Directions: After identifying functional and non-functional tools and equipment, your group
will make a log report.
a. With an index card (5x8), construct a grid and list all identified and labeled
defective tools in alphabetical order.
TOOL RECOMMENDATION
For Repair For Disposal

1.
2.
3.
4.
5.
b. Using another index card (5x8), do the same with defective equipment.
EQUIPMENT RECOMMENDATION
For Repair For Disposal

1.
2.
3.
4.
5.
c. Submit your log reports to your teacher.
LEARNING OUTCOME 2
Perform basic preventive and corrective maintenance
Nail care tools and equipment are identified.

Appropriate cleaning procedure of nail care tools and equipment are applied.
Tools are cleaned according to standard procedures.
Defective equipment and tools are inspected and replaced according to manufacturer’s specifications.
Workplace is cleaned and kept in safe state in line with OHS regulations
Materials

 Personal protective equipment (PPE)
mine how much you already know about the basic preventive and corrective maintenance of nail care tools and equipment. Take th
Pretest LO 2
Directions: Supply an appropriate word to make each statement complete. Choose the
answer from the pool below and write it on a separate sheet of paper.
Water Store Inspect Boil

Enclosed Sterilize Disinfect Sanitary
Laundered Directed
1. metal
implements after every use to avoid infection or possible diseases.
2. foot basins after each use with a bleach solution.
3. metal implements once a month in a pot for 10 minutes.
4. sterilized metal instruments in an airtight, zipper-sealed bag to keep them

from being exposed to dirt and bacteria.
5. tools and equipment regularly to identify defective ones.

6. All beauty salons must be well-lighted and ventilated and must be in good
condition.
7. Salon establishments must be provided with continuous running hot and
cold .
8. All waste materials should be disposed of in an waste bin fitted with
polythene bin liner.
9. Each client must be provided with a freshly towel.
10. Measure and mix disinfectant as .
Read the Information Sheet 1.1 very well then find out how much you can remember and how much you learned by doing Self-c
How can tools and equipment be kept safe, clean and

functional?
It is vital to sterilize metal implements, sanitize wooden tools, disinfect hand

and foot spa machines as well as environmental surfaces before and after each use.
Contaminated tools can cause bacterial and fungal infections that are unsightly, painful and
sometimes, fatal. There are several methods of cleaning and sterilization. Do a cursory
cleaning after each nail care service and deep-clean monthly to keep tools safe and useful
all the time.
1. Sterilize metal implements after each use in a hospital-grade disinfectant that is
bactericidal, virucidal, and fungicidal. This disinfectant can be found in beauty supply
stores. Immerse the tools in the disinfectant for 10 minutes.
2. Disinfect foot basins after each use with a bleach solution. Make a 1-to-10 solution by
mixing one part bleach with 10 parts water. Using gloves, rinse the basin with the
solution to disinfect. If necessary, scrub with a detergent to remove any dirt or debris.
3. Use a boiling method of sterilization once a month to disinfect all metal implements.
Designate one pot for sterilization to prevent cross-contamination with food.
Submerge the tools in boiling water for 10 minutes. Drain the tools and allow them to
dry.
4. Store sterilized metal implements in an airtight, zipper-sealed bag to keep them from
being exposed to dirt and bacteria. Be sure tools are completely dry before storing
them. If waiting more than a couple of weeks before the next nail care service,
sterilize the tools again before use.
5. Inspect tools and equipment regularly to identify defective ones for repair,
replacement or condemnation.
Keeping the Workplace Clean and Safe
1. All beauty salons must be well-lighted and well-ventilated and must be in good
sanitary condition.
2. The salon premises must be free from rodents, vermin, flies or other similar insects.
3. All salon establishments must be provided with continuous running hot and cold
water.
4. The curtains and floor coverings in the salon must be washable and kept clean.
5. All hair, used cotton or other waste materials must be removed from the floor
immediately, and deposited in a closed container. Get rid of them from the salon
premises at frequent intervals.
6. The rest rooms must be well-sanitized and be provided with individual towels.
7. Each beautician must wear a washable uniform while working on clients.
8. Each client must be provided with a freshly laundered towel.
9. All waste materials should be disposed of in an enclosed waste bin fitted
with polythene bin liner, durable enough to resist tearing.
Self-Check 2.1
Directions: Enumerate the following:
1. 5 Ways/Means to Keep Tools and Equipment Safe and Functional.
2. 7 Measures in Keeping the Salon Clean and in a Safe State.
Operation Sheet 2.1
A. Group Activity
Directions:
In your school’s beauty salon, conduct a visit and follow the proper way of keeping
the workplace clean and safe to individual clients. Make necessary recommendations if it is
beyond your limitations.
1. See to it that the premises are free from rodents, vermin, flies or other similar insects.
2. Make sure that the place is provided with continuous running hot and cold water.
3. Inspect the curtains and floor coverings if they are washed and ironed.
4. Ensure that all used cotton or other waste materials are removed from the floor
5. Sanitize the rest room, its door knob and provide it with individual towels.
6. Check if waste materials are disposed of in an enclosed waste bin fitted with
polythene bin liner, durable enough to resist tearing.
B. Materials, Tools, Equipment and PPE
Materials
Alcohol Bleach Disinfectant Cleaning cloths
Tools
Cuticle Nail Pusher Nail Cutter Cuticle Nippers
Cuticle Scissors Metal File Orangewood Stick
Equipment
Foot Spa Machine Hand Spa Machine Sterilizer
Foot Spa Stool Manicure Table Manicurist’s Stool
PPE
Gloves Mask
Procedure:
1. Steps in Sanitizing an Equipment
a. Read directions on disinfectant.

b. Measure and mix disinfectant as directed.
c. Saturate a cleaning cloth with disinfectant solution and wipe entire surface area
of equipment.
d. Wipe the surface with paper towel to dry it.
e. Dispose of sanitizing solution and used towels.
2. Steps in Sterilizing Metal Implements
a. Soak the tools/ implements in hot, soapy water solution to remove any debris and
oil residue. Rinse them thoroughly.
b. Place the tools/implements in a 70% to 90% alcohol solution for 20 minutes.
c. Remove the tools/implements from solution, wipe them dry, and place them into a
dry sterilizer.
3. Steps in Sanitizing Wooden Implements
a. Cleanse sanitizing jar with disinfectant and wipe it dry.

b. Place thin layer of sterile cotton at the bottom of jar.
c. Remove implements from wet or dry sanitizer and place them into the jar,
handles up, except for metal nail files.
d. Fill jar with 70% to 90% alcohol solution to cover cutting edges and tips of
orangewood sticks

Find out by accomplishing the Scoring Card honestly and sincerely. Remember it is your learning at stake!
DIRECTIONS:
Evaluate your group by checking the appropriate boxes to indicate the degree of
competency In the given activities.
Follows proper way of keeping the workplace clean and safe.
Demonstrate knowledge on sanitizing nail care:
a. equipment.
b. metal implements
c. wooden implements
Observes safety precautions at all times
Work finished on time
Total
Rating Scale:
15 - The students consistently perform tasks to standards with no supervision.

10 - The student s can perform the tasks with limited supervision
5 - The student can perform the tasks with direct supervision.
Directions:
After learning the proper cleaning procedure of nail care tools and equipment,
you are now ready to clean your own sets of tools and equipment.
1. Clean your metal instruments according to standard procedure.

2. Disinfect your foot basin, finger bowl, foot spa stool, manicurist’s stool, and
manicure table.
3. Sanitize your orangewood stick, buffer, foot brush, nail brush.
Present your finished work to your teacher for inspection.

LEARNING OUTCOME 3
Store nail care tools and equipment
Inventory of tools, instruments and equipment are conducted and recorded per salon practices.
Tools and equipment are stored safely in accordance with manufacturer’s specifications or salon procedure.
Materials
 Hand tools, equipment and specifications

 Tools condition report forms
Let us determine how much you already know about the proper storage of nail care tools and equipment. Take this test.
Pretest LO 3
Directions: Write T if the statement is correct; if not, change the underlined word/s to make
it correct.
1. Tools which are made of metal should be kept clean and sanitized properly in
preparation for the next client.
2. The hand and foot spa machines must be kept dry after disinfecting them.
3. Metal tools and instruments must be sterilized following proper

sterilization techniques.
4. Tools/ Implements which are made of porous materials such as nail files, buffers, nail
brushes and orangewood sticks cannot be sterilized. These tools should not be
reused.
5. Tools or equipment in poor condition can still be used in any nail care service.
ead the Information Sheet 1.1 very well then find out how much you can remember and how much you learned by doing Self-check
At the end of every working session, make an inventory of the things that should be
done:
a. Tools which are made of plastic should be kept clean and sanitized properly in
preparation for the next client.
b. Empty bottles and containers are discarded in a covered trash bin.

c. Used treatment products and other chemicals are stored, arranged and properly
labeled in the cabinet.
d. Finger bowls must be sanitized before another client use them.

e. The hand and foot spa machines must be kept dry after disinfecting them.
f. Table tops and door handles are wiped with disinfectant and the floor should be
mopped with disinfectant as well.
g. Metal tools and instruments must be sterilized following proper

sterilization techniques. After the process, store in a dry cabinet until
needed.
h. Tools/Implements which are made of porous materials such as nail files, buffers,
nail brushes and orangewood sticks can harbor bacteria easily. Since they are wood
products which cannot be sterilized, these tools should not be reused.
i. Waste materials should be disposed of properly in an enclosed waste bin fitted

with polythene bag. The bin should be sanitized with disinfectant regularly in a
well- ventilated are. Remember to wear protective gloves while doing this.
j. Any tool or equipment in poor condition must be repaired immediately, replaced or

disposed of properly so as not to pose danger not only to the clients but also to the
beauticians.
Storage:
A manicurist must ensure that storage of nail care tools, materials and equipment
within the establishment meets the following requirements.
1. Flammable and combustible chemicals are stored away from potential sources of
ignition such as an open flame or an electrical device;
2. All nail care chemicals are stored in closed bottles or containers
3. Storage units:
a. Cabinets, drawers, containers used for storage of implements and towels
are clean;
b. Clean linen is stored in an enclosed, dust-proof cabinet or container;
c. Implements which have been used on a client are not placed in a
container with clean implements;
4. Supplies:
a. Unused supplies, except product application brushes, are stored in a clean,
closed container or drawer;
b. Used/soiled disposable supplies are discarded immediately in a
clean, closed waste receptacle;
6. Implement Storage:
a. Implements that have been used on a client or soiled in any manner
are placed in a properly labeled covered receptacle until disinfected;
b. Sanitized implements are stored in a clean closed container or drawer
until used;
7 . Towels
a. Cloth towels are deposited in a closed receptacle after use;
b. Used/soiled cloth towels are not used again until properly laundered and
sanitized;
d. Disposable towels are discarded in a covered waste receptacle immediately
following each nail technology service;
Self-Check 3.1
In not less than 5 sentences, describe how tools and equipment are stored.
Scoring rubric
Fair Good Very Good
5pts 10 pts 15 pts
Knowledge and Student was able to Student was able to Student was able to
understanding convey limited ideas convey a few ideas convey several ideas
on the topic with little on the topic with on the topic with a
knowledge some degree of good degree of
knowledge knowledge
Accuracy Work was organized Work was organized Work was organized
and planned with and planned with and planned with
little effectiveness some effectiveness considerable
effectiveness
Effort Student put little or Student put some Student put full effort
no effort into this effort into this into this activity.
activity. activity.
Rating Scale:
15 pts.=Very Good
10 pts.=Good
5 pts.= Fair
Operation Sheet 3.1
I-A. Materials, Tools and Equipment
Tools Materials EQUIPMENT

Lotion
Manicure Pillow
Nail Hardener
Nail Polish Remover
Quick Dry
Solvent
Toe Nail Separator
Top Coat
Wet Sanitizer
Procedure:
1. Given the list of materials, tools and equipment in nail care, show how to properly store
them.
B. Materials, Tools and Equipment

All the materials, tools and equipment provided in the workplace
Instructions:
Simulate the proper safekeeping and storage of tools and equipment.
Score Card
DIRECTIONS:
Evaluate yourself by checking the appropriate boxes to indicate the degree of competency
In the given activities.
Follows proper way of storing nail care tools and
equipment
Steps were completed in the correct sequence.
Observes safety precautions at all times
Work finished on time
Total
Rating Scale:
15 - The student consistently perform tasks to standards with no supervision.
10 - The student can perform the tasks with limited supervision
5 - The student can perform the tasks with direct supervision
Directions: After learning the correct way of safekeeping/storage of nail care tools and
equipment, you are now assigned to do the same in your shop work.
1. Make an inventory of all the tools and equipment in your shop work using index cards
as your checklist.
Tick ( ∕ ) the tool, material or equipment which are missing.
Tools Materials Equipment

Cuticle Nipper Apron Hand Spa
Machine
Cuticle Scissor Assorted Nail Foot Spa Stool
Polish
Foot File Benzalconium Manicure Table
Foot Spa Basin Chloride Sterilizer
Foot Spa Tray with Bleaching Soap Timer
Handle
Manicure Tray Cling Wrap
Manicure Nail Brush Cotton
Mixing Bowl Cuticle Oil
Nail Buffer Cuticle Remover
Nail Disinfectant
Cutter/Clipper/Trimmer First Aid Kit
Plastic Container for Garbage
Bags/Bins
Cotton Hand Towel
Pumice Stone Emery board
Trolleys Lotion
Manicure Pillow
Nail Hardener
Nail Polish
Remover
Quick Dry
Solvent
Toe Nail Separator
Top Coat
Wet Sanitizer
Good luck!
REFERENCES
LO1
 Nordmann, Lorraine, et. al. Beauty Therapy – The Foundation. Thomson
Learning: 2001
 Kibbe, Constance V. Standard Textbook of Cosmetology. Milady
Publishing Corp: 1984
 Moore, Oakley and Franco. The World of Cosmetology. McGraw-Hill Book
Company: 1980
LO 2
Learning: 2001
Company: 198
LO 3
Learning: 2001
Company: 198
LESSON 3
Practice Occupational Health and Safety Procedures
LEARNING OUTCOMES:
LO 1.Identify hazards and risks; and

LO 2. Evaluate and control hazards and risks;
Definition of Terms
Chemical Hazards are substances used and/or produced at work that have the potential
to harm the health and safety of people at work
Infection is a condition when micro-organisms invade the body and multiply causing
illness
Infection control is a process that minimizes the risk of spreading infection while
performing procedures on client
Harm are adverse health effects on something or someone under certain conditions at
work.
Maximal Allowable Concentration ( MCL) is a peak or maximum concentration of an

airborne, to which most workers could be safely exposed
Occupational Hazards - are various environmental factors or stresses that can cause
sickness, impaired health, or significant discomfort in workers and can be classified as
chemical, physical, biological or ergonomic
Occupational health and safety (OHS) is a planned system of working to prevent

illness and injury, where you work by recognizing and identifying hazards and risks.
OSH Trainings - are interventions conducted to facilitate learning on occupational safety

and health, the results of which can contribute to the attainment of better and improved
OSH conditions.
Skin penetration means any process, whether intentionally or otherwise, that involves
the shaving, piercing, cutting, puncturing, tearing of the skin or mucous membrane.
Threshold Limit Value (TLV) is a measure of concentration of toxic substances that

client can withstand.
Workplace - refers to the office, premises or worksite where a worker is temporary or
habitually assigned. Where there is no fixed or definite workplace, the term shall include
the place where the worker actually performs regular work, or where he regularly reports
to render service or to take an assignment.
LEARNING OUTCOME 1
Identify hazards and risks
Workplace hazards and risks are identified

Hazards and risks and their corresponding indicators are identified in the workplace
Effects of hazards are determined.
Materials
 Lcd projector, Video clips, Laptop
Let us determine how much you already know about the hazards and risks in the workplace. Take this test.
Pretest LO 1
Multiple choice: Directions: Read the following statements and select the best
answer.
1. It is the chance or probability that a person will be harmed or will experience an

adverse health effect if exposed to a hazard
a. harm
b. risk
c. ergonomics
2. It is an adverse health effect on something or someone under certain
conditions at work.
a. harm
b. risk
c .ergonomics
3. It involves identifying the hazards present and then evaluating the risk, taking
into account the existing precautions.
a, risk assessment
b. training
c. experience
4. It is important to give the health and safety experience to new or inexperienced
workers, including those that have been away from the workforce for some time
a. training
b. exposure
c .hygiene
5. It is a practice in some beauty salons that may affect the health of customers and
workers that may lead to exposure to biological hazards that cause infectious
diseases.
a. unsafe practices
b. fungi
c. activities
Occupational health and safety (OHS) is a planned system of working to prevent

illness and injury where you work by recognizing and identifying hazards and risks. Health
and safety procedure is the responsibility of all persons in the beauty service industries. You
must identify the hazards where you are working and evaluate and control how dangerous
they are. Eliminate the hazard or modify the risk that it presents.
An occupational health and safety management system should follow the following
elements:
1. Management Commitment-management can show their commitment to OHS by
 establishing an OHS policy
 identifying its objectives
2. Planning- planning includes setting standards for management and employees by

establishing:
 How the business ensures sound OHS practices are implemented?
 Who is assigned and responsible for the implementation? This person will
coordinate the assessment, delegate tasks and be responsible for taking
notes and writing up information for the register
 What resources are required for the implementation?
 When will the OHS practices be implemented?
 How will workers identify and report hazards to employer?
3. Consultation- consult and work with your employees, It is important that

employees have a basic understanding of what could be considered high –risk
activities in the salon. There should be a two way communication where
employers listen to and cooperate with employees then management can ensure
OHS decisions are based on the best and most up-to –date information.
4. Training- it is important to give the health and safety training to new or
inexperienced workers, including those that have been away from the workforce
for some time.
5. Risk management- involves identifying the hazards present and then evaluating
the risk, taking into account the existing precautions.
The following are the steps of risk assessment:
1. Identifying hazards and risks
2. Evaluate and control hazards and risks
3. Control hazards and risks
- harm or adverse health effects on something or someone under certain

conditions at work.
- the chance or probability that a person will be harmed or experience

an adverse health effect if exposed to a hazard.
IDENTIFY HAZARDS AND RISKS- Identifying workplace hazards means looking for
those things at your workplace that have the potential to cause harm.
Step1.Identifying hazards and risks
There are many hazards present at a beauty salon that deserve your attention. Use
this guide as a starting point for conducting a risk assessment at your facility to correct
potential hazards and keep your client safe. Identifying hazards and risks should include the
following:
 consulting with salon employees
 conducting a worker survey
 inspecting the workplace
 ensuring that the information supplied by manufacturers and suppliers is
regularly updated and made available to all in the workplace.
Common hazards in a beauty salon include:
1. Electricity
-common accidents in the workplace can result from contact with
faulty electrical equipment that may have become “live” or from
contact with worn or damaged power cords and switches, the
presence of water in the salon increases the risk of electrocution or
injury.
2. Chemical hazard
-chemicals used in the beauty salon like nail polish, nail polish
removers, callus removers, and acrylic powders for artificial nails are
common products found in many nail salons. It causes skin irritations and
respiratory problems. Information on chemical hazards can be obtained
from the following:
 the product label
 material safety data sheet (MSDS) -This sheet will provide
information on how to properly handle, store, discard and
care for potentially hazardous chemicals. It will also provide
information on what to do if you are exposed to the
chemical and has bad reaction
 the manufacturer
3. Slips, Trips, Falls
-Slips, trips and falls are common occurrences in workplaces. People slip
and trip on slippery, rough or uneven surfaces and may fall down from
stairs or off ladders.
4. Fire
The range, number and 'portability' of electrical equipment used in salons,
together with their proximity to water, make for potentially hazardous
situations
5. Manual handling of material and tools
-Lifting and moving heavy stock materials and working at poorly
designed workstations can cause injuries and muscle strains.
Injury due to cutting with cuticle nippers, cuticle scissors and cuticle pusher.
6. Infection hazards
Unsafe or unhygienic practices in the beauty salon may affect the health
of customers and workers that may lead to exposure to biological hazards that
cause infectious diseases such as blood borne pathogens (Hepatitis B, Hepatitis C,
and HIV), fungal infections (Ringworm),
7. Ergonomic Hazards
Ergonomics is the scientific study of people at work. The goal of
ergonomics is to reduce stress and eliminate injuries and disorders associated
with the overuse of muscles, bad posture and repeated tasks..
Self-Check 1.1
Directions: Write the word True if the statement is correct and False if the statement is
incorrect.
1. MSDS provides information on how to handle, store, discard and care for
potentially hazardous chemicals
2. OHS is a planned system of working to prevent illness and injury where you work
by recognizing and identifying hazards and risks in the nail salon.
3. Identifying workplace hazards means looking for those things at your workplace
that have the potential to cause harm.
4. Damaged equipment may cause an accident or injury if it is not working correctly

5. In any occupation where there is exposure to blood and other bodily fluids, there
is always the potential for the transmission of blood borne allergy
6. To avoid injury and harm to health of salon's client, it is important that new or
inexperienced workers be adequately trained in OHS.
7. Ergonomic is to reduce stress and eliminate injuries and disorders associated

with the overuse of muscles, bad posture and repeated tasks
8. PPE is used to protect workers from chemical hazards.
9. Back injuries are most commonly caused by wrong posture or position and can
be prevented.
10. Nail workers have an obligation to their client's health and safety.
Activity Sheet 1.1
I. Venn Diagram Learning Activity
Procedure
1. Group yourselves into 5 members
2. Choose your reporter and complete the Venn Diagram.
3. List down common hazards that might be encountered in the following areas:
 Malls
 School
 Market
4. Report the common hazards in class
5. Keep the summarized common hazards notes ,it will be used in the next lesson
on how to prevent hazards and risks in malls, school and market.
Mall Market
School
HAZARD RECOGNITION ACTIVITY
Scoring Rubrics
Fair Good Very Good

5pts 10 pts 15 pts
Knowledge and Students were able Student were able to Students were able
understanding to convey limited convey a few ideas to convey several
ideas on the topic on the topic with ideas on the topic
with little knowledge some degree of with a good degree
knowledge of knowledge
Accuracy Work was organized Work was organized Work was organized
and planned with and planned with and planned with
little effectiveness some effectiveness considerable
effectiveness
Effort Students put little or Students put some Students put full
no effort into this effort into this effort into this
activity. activity. activity.
Rating Scale
15 - The students consistently perform tasks to standards with no supervision.

10 - The student s can perform the tasks with limited supervision
5 - The students can perform the tasks with direct supervision
Directions: Look for hazards and risks that might be present in your house. Place a sticker
whenever you find possible hazards inside your house . Identify and give the possible risks
that might happen in your house.
PARTS OF THE HAZARDS RISKS

HOUSE
1.
2.
3.
4.
5.
LEARNING OUTCOME 2
Evaluate and control hazards and risks
Terms of maximum tolerable limits are identified based on threshold limit values (TLV)
Evaluate and control hazards and risks
OHS issues and concerns are identified in accordance with workplace requirements
Materials
 Lcd projector, Video clips, Laptop
Let us determine how much you already know about the evaluation and control of hazards and risks. Take this test.
Pretest LO 2
Directions: Answer the following questions to demonstrate your prior knowledge on

health and safety issues in the workplace.
1. If spillage occurs
a. walk over it
b. shout for help
c. throw towel over it
d. identify the spillage to everyone and clean up appropriately
2. To avoid product contamination always:

a. dispose of used or remaining product between clients
b. use an applicator bottle or dropper to apply the product.
c. Use single-use disposable implements to remove products from containers for
application or remove product with a clean and disinfected spatula and put product
to be used into a disposable or disinfectable service cup.
d. all of the above
3. If you are carrying out a nail service and the alarm sounds , you should
a. leave the workplace and run
b. leave the client to relax while you go out to safe area
c. ignore it-it might be false alarm
d. assist your client to the nearest exit and safe place
4. Occupational health and safety risk assessment is carried out to

a. make the nail salon look professional
b. assess the risk of using chemical substances
c. assess the risk of using equipment
d. preventing injury, infection or accidents
5. An overloaded socket requires you to

a. repair and obtain an extension wire until new sockets can be fitted.
b. keep on using it
c. ensure candles are not near to it
d. inform people of wet floor
Read the Information Sheet 2.1 very well then find out how much you can remember and how much you learned by doing Self-ch
Evaluating hazards and risks is the process of determining the level of risk created by
the hazard and the likelihood of injury or illness occurring. The priority of control
increases as the established level of risk increases. Person identifying the risk of harm
or injury from a hazard in a salon should consider these questions:
 how likely that it is a hazard will cause harm;
 how serious that harm is likely to be;
 how often (and how many) workers are exposed.
You must have a record of every risk assessment. If this injury or harm
happen again, it is possible that you will go back to the original records to see if
the original assessment overlook a possible hazard. The assessment stage is
essential because it will determine the type(s) of control methods required.
Reminder: a risk is the chance,( high or low) that somebody may be
harmed by a hazard
Control Hazards and Risks
Where the assessment reveals a problem, preventive measures must be
designed and implemented. Control measures should now be selected according to
the list of control priorities. First, try to eliminate the hazard. If this is not possible,
prevent or minimize exposure to the risk by one or a combination of:
a) substituting a less hazardous material, process or equipment
b) redesigning equipment or work processes c) isolating the hazard
When exposure to the risk is not (or cannot be) minimized by other means:
a) Introduce administrative controls like safe work methods and operating
procedures . Written work procedures control the way the work is done.
b) Use appropriate personal protective equipment
Personal Protective Equipment (PPE) at Work
``Personal protective equipment is clothing equipment designed to be worn by a nail

technician or salon workers to protect them from risks of injury or illness. It should only be
considered as a control measure when exposure to a risk cannot be minimized in another
way, or when used in conjunction with other control measures as a final barrier between the
nail salon worker from the chemical hazard and other cause of hazards..These clothing
equipment does not control hazard at the source equipment which will protect you from risks
to health and safety.
PPE is compose of the following:
Impermeable gloves Eyewear
Splash proof apron Protective mask
Advantages of wearing PPE at work:

 To prevent damage to workers’ nails and skin.
 To prevent skin from absorbing potentially harmful ingredients which may
cause skin allergies, irritation, or other related problems.
 So as not to generate a lot of dust, it may be necessary to wear a dust mask
to minimize breathing in particles while filing or buffing nails.
 To protect the wearer's face and prevent the breathing of air contaminated
with chemical and/or biological agents
Common workplace hazards and their control measures
The following are workplace hazards and their control measures:

ELECTRICAL HAZARD
Many of the electrical appliances used in the beauty salons can create serious
health and safety risks in the nail and beauty industry, particularly in wet conditions.
Damage to equipment increases this risk. Electrical shock can result in electrocution,
burns and injuries from falls.
Control Measures:
 You should always check any equipment before use.
 Ask qualified electrician to check all pieces of electrical equipment in the
workplace annually or as often as possible.
 Broken or damaged electrical equipment should not be used, the tag must
warn people not to use the equipment.
 When adjusting or cleaning equipment, SWITCH OFF the power and pull out
the plug and NOT by the cord.
 Do not touch equipment with wet hands or don't use a wet cloth to clean
sockets.
 Make sure flexible cords are fully unwound and kept clear of work traffic.
 Do not run too many pieces of equipment from one socket
CHEMICAL HAZARD
Chemical Hazards are substances used and/or produced at work that have the
potential to harm the health and safety of people at work. Beauty industry is exposed to
repeated exposure to numerous hazardous substances including nail and skin care
products, hair dyes, bleaches, perming solutions, hair styling agents, straighteners,
rebonding solutions, peroxides, disinfectants and cleaning products. . They can harm
people’s health if they get into the body, for example, if they are breathed in, absorbed
through the skin or eyes or ingested accidentally. The effects of hazardous substances may
show immediately, or it may take years for illness or disease to develop. Health effects of
some hazardous substances include skin irritation, coughs, asthma, sensitization, poisoning
and cancer.
Measures of Concentration of Toxic Substances (Chemical Substances)
Threshold Limit Value (TLV)

TLV is a measures of concentration of toxic substances .It is the average
concentration of an airborne substance to which most workers could be safely
exposed over an eight-hour working day or forty-hour working week throughout a
working lifetime.
Maximal Allowable Concentration ( MCL)
MCL is a peak or maximum concentration of an airborne to which most worker could
be safely exposed
Control Measures:
 using alternative substances or processes which are less hazardous
 Good ventilation can get rid of the fumes and chemical smell that builds up in a
salon
 providing separate eating and drinking amenities for employees
 ensuring appropriate safety signs, training, instruction and provision of Material
Safety Data Sheets (MSDS) and labels
 using appropriate PPE.
Slips, Trips, Falls
Slips-loss of balance caused by too little friction between a person’s foot and a walking surface.
Trips- - hit an object, lose your balance and fall
SLIP, TRIPS AND FALLS

Falls-- when you lose your balance & drop to the floor
The results of slips, trips and falls include broken bones, abrasions,
contusions, strains, sprains, back or spinal injuries and other serious
injuries. During a slip, trip or fall accident, injury may be caused by over
stretching joints, bones and ligaments.
Control Measures
 clean up spills straight away.
 use mats on slippery floors.
 wear appropriate work shoes.
 improve cleaning methods to prevent build-up of grease/detergent
 provide ample storage space, to avoid materials being placed in
aisles/walkways
 set absorbent flooring materials into entrance areas
FIRE SAFETY
As a beauty salon staff, you must be aware of and trained in fire and emergency
evacuation procedures in the workplace. Emergency exit route will be the easiest route
by which all of the clients and staff can leave the building or salon safely.
Control Measures:
 . Keep all escape routes and fire exits clear, and make regular checks to ensure
this case.
 Firefighting equipment must be available, located in specified area. you can
include fire extinguishers, blankets, sand buckets and water hoses.
 Store products, particularly aerosols, away from naked flames or sources of
heat, at or below room temperature and in a dry atmosphere.
 Switch off and unplug all electrical appliances before leaving the workplace .
 Make sure that all workers in the salon are aware of the action that must takes
in the event of a fire.
MANUAL HANDLING
Manual handling involves any activity that requires the use of force exerted by a
person to lift, lower, push, pull, carry or otherwise move any load. These can result in
injuries to any part of the body.
Nail salon workers use forceful repetitive movements such as filing and buffing
nails and holding uncomfortable positions for long periods of time, thereby increasing
risk for joint and musculoskeletal injuries
Control measures:
 plan the lift before you begin

 position your feet shoulder width apart
 bend your knees without moving your upper body, squat down to the floor. Keep
the shoulders level and facing in the same directions as the hips.
 get a firm grip and keep the arms within a boundary formed by the legs
 keep the load as close to the body as possible
 lift the load smoothly, do not jerk
 if an item is too high, use a stepladder or stool to help you
BIOLOGICAL HAZARDS
Biological hazards, also known as biohazards, refer to biological substances that

pose a threat to the health of living organisms, primarily that of humans . Micro-organisms are
everywhere and are continually introduced into the environment. They live on skin, in food
and dirt. Micro-organisms are easily spread between clients and operators and are easily
transferred by contact with unwashed hands, soiled equipment or contact with blood and
body substances. Nail technicians must assume that all blood and other body substances
are potential sources of infection. To minimize transfer of micro-organisms, you must
perform all procedures in a safe and hygienic manner, following all infection control
techniques and procedures. Skin that is intact, without cuts or abrasions, is a natural
protective barrier against infection
Control Measures:
The following are the methods on how to control infectious diseases:
1. Cleaning is the removal of soil and a reduction in the number of micro-organisms
from equipment surfaces by washing in detergent and warm water.
Methods of Cleaning:
1. Rinse the equipment in warm water (15-30°C) to remove any blood or body
fluids. Hot water used at this stage will cause coagulation and the substances will
stick to the instrument. Cold water will harden fats making cleaning more difficult.
2. Wash the equipment in a sink filled with warm water and a mild alkaline
detergent to remove all visible soiling (strong alkaline detergents may damage
some instruments). Hold the items low in the sink to limit the generation of
aerosols during scrubbing. Use of a scouring pad can assist in removing stains.
3. Rinse the equipment thoroughly in running water.
4. Dry with a cotton cloth. Drying prevents residues from damaging equipment
during sterilization.
5.Store under cover in a clean, dry and dust free environment.
2. Disinfection is the removal of micro-organisms by chemical or physical means. The level
of decontamination depends on duration of exposure to lethal levels of disinfectants. Unlike
sterilization, disinfection does not remove all microorganisms but reduces the population to
safe levels.
Proper use of disinfectants:
 All implements must be thoroughly cleaned of all visible matter or residue before
soaking in disinfectant and prevent them from being effective.
 Implements and tools must be completely immersed in disinfectant solution for the
time specified on the product label. Complete immersion of tools and implements
means enough liquid to cover all surfaces of the item including the handles.
3. Sterilization is the total destruction of all living micro-organisms and their spores.
Method of sterilization:
1. Physical agents such as radiation and heat
2. Chemical agents, such as antiseptics, disinfectants and vapor fumigants
ERGONOMICS
Ergonomics is the study of how equipment and furniture can be arranged in order
that people can do work or other activities more efficiently and comfortably . It is
important in the adaptation of work conditions to the physical and psychological
nature of people.
Below are pictures showing how ergonomics can help reduce strain to your
bodies on the proper posture during manicure and pedicure services .
A nail technician should consider the three main factors in nail servicing:
1. Supporting the weight of the client's arm or leg
2. Working while looking down at the hand or foot of the model
3. Looking forward at the hand or foot of the model
The following pictures show how you are going to position the hand and foot of your
client when giving a manicure and pedicure services to avoid pain in your hands,
shoulders and back
A. Correct position of hand while giving a manicure
Correct position of client's hand Incorrect position of client's hand
Use rolled towel or hand cushion in giving a manicure,client's arm weight will rest on
the cushioin instead of holding it.Repetitive motion ,takes a toll on your muscles and joints
and can cause long-term problems,such as arthritis and carpal tunnel syndrome.( Carpal
tunnel syndrome. It is a type of compression neuropathy , a nerve damage caused by
compression and irritation of the median nerve in the wrist. The nerve is compressed within
the carpal tunnel, a bony canal in the palm side of the wrist that provides passage for the
median nerve to the hand and can be due to trauma from repetitive works.)
B. Correct position of foot while a giving a pedicure
Correct position of client's leg Incorrect position of client's leg
Correct position of client's leg

Elevate client's feet and place their feet or legs on a footrest that bears their weight.
During the massage portion of a service, the footrests can bear the majority of the weight so
nail technician can limit pressure on their back, shoulders, and neck
Incorrect position of client's foot :
Don’t bear the weight of a client’s leg by resting the foot in your lap or by using your
own strength to lift and lower the leg. This position will cause strains in the muscles in your
shoulders and back, and, because you are connected to the client, it also reduces your
mobility to be agile as you work through the different steps of the service
C. Correct position of a pedicurist in giving a pedicure service
Correct position of pedicurist Incorrect position of pedicurist
Correct position of pedicurist

You should keep your back straight and supported while giving a pedicure service, and use
both the height adjustment of your chair and of the footrest to keep the foot at a workable
level instead of straining the body. Suggest your client to bend their knees and move their
feet to appropriate positions.
Incorrect position of nail technician while giving a pedicure service
If you need to perform close-up, detailed work, there is a tendency to round the shoulders
and extend the neck to get as close to the foot as possible, which will cause strain to the
muscles in the upper body and the entire back. Worse will happen because you will add
enormous strain to your body as you try to get into a position that will give you best
perspective.
D. Correct position of a pedicurist feet while giving a manicure service
Correct position of pedicurist's feet Incorrect position of pedicurist's feet
Correct position of pedicurist's feet

As nail technician, you may twist your chair because you want to get closer to your work.
Instead of contorting yourself into this position, it might benefit you from a table with a cut-
out that allows you to sit straight in your chair but still work on the client’s hands from an
angle. You can improve your posture even without a cut-out in the desk by strengthening
your core muscles so you are able to sit straight for longer periods of time. It is also
important to develop a habit of keeping both feet on the floor to prevent the unbalanced
compression.
Incorrect position of pedicurist's legs

This nail technician has her shoulders rolled forward, her left arm is resting on the table,
which pushes her shoulder up, she is twisted in her chair, and her legs are crossed. This will
cause more compression on one side of the body than the other.
Self-Check 2.1
Completion Test: Evaluation and Controlling hazards and risks

Directions: Choose the word from the box given below to complete the
sentences.
reduction burns slips microorganism
clear, health injury illness
airborne syndrome
1. Disinfection does not remove all but reduces

the population to safe levels.
2. Person identifying the risk of harm from an of
hazard in a salon should be aware of the OHS procedures.
3. . Cleaning is the removal of soil and a in the
number of micro-organisms from equipment surfaces by washing in
detergent and warm water.
4. . Keep all escape routes and fire exits and make
regular checks
to ensure this cases.
5. During a , trip or fall accident, injury may be caused by
over stretching joints, bones and ligaments
6. Personal protective equipment is clothing equipment designed to be
worn by a nail technician or salon workers to protect them from risks of
injury or .
7. Electrical shock can result in electrocution and injuries
from falls.
8. effects of some hazardous substances include skin
irritation, coughs, asthma, sensitization, poisoning and cancer.
9. Carpal tunnel is a type of compression neuropathy ,
a nerve damage caused by compression and irritation of the median
nerve in the wrist..
10. MCL is a peak or maximum concentration of an to which
most worker could be safely exposed.
Activity Sheet 2.1
I. Directions: Group activity: Visit and make an interview in a nail salon nearby your
place, use the checklist below to serve as your basis in evaluating hazards and risks in a
nail salon.
CHECKLIST
The checklist consist of questions on types of occupational hazards. The questions
can be answered by “YES” or “NO”. Measures that can be taken to eliminate or
reduce hazard are often already indicated by questions themselves. This checklist is
not intended to cover all the risks of every workplace but
to help you put the method into practice.
Does the hazard exist at the workplace?

Physical load and ergonomic workplace design YES NO
QUESTIONS
1. Do clients’ and nail technicians’ seats enable a
good working posture for the variety of different tasks
carried out by a nail technician?
2. Does the amount of working space cause
uncomfortable working postures?
3. Do nail technicians work in solid shoes (without
heels) that give good support and enable a good
working posture?
4. Do nail technicians complain about the climate or
smell in the salon
5. Is there sufficient light for safe and efficient task
performance?
Working with chemicals hazards
QUESTIONS
1. Are all information about the hazards of the
chemicals available and known to all employees?
2. Are employees sufficiently protected from

exposure to chemical
3. Are the manufacturers’ safety instructions
followed?
4. Have employees been instructed on working
safely with dangerous materials?
5. Are protective gloves routinely being used for

chemical tasks and for cleaning tasks by all
employees?
6. Are all employees instructed in the use of, and
encouraged to use, protective gloves and creams?
Electrical risks, slips, trips, and falls

QUESTIONS
1. Are the floors slippery and dirty, during work time?
2. Are aisles or passageways tidy free from cords,
electrical cables and extension boards lying on the
floor?
3. Do the employees wear slippery shoes?

4. Is electrical equipment (foot spa machine) used
according to the suppliers’ safety instruction?
5. Are the electrical devices and cables undamaged
and regularly examined?
6. Are electrical devices protected against splash
water?
Activity Sheet 2.2
II. FILM CLIPS VIEWING
You are going to view film clips that will provide a basic introduction to health and
safety signs and symbols found in the workplace. They provide a useful guide for you and
other people who will undergo other services in the industry. Different workplace situations
are shown where safety signs are important. The film is suitable for all sectors and all levels
of employees but especially for young people in training or work experience. This design will
inform you about safety signs at work, to promote the importance of respecting the signs,
and to learn and identify the meaning of the signs through their form and the color.
Directions:
1. Watch the Napo film clip provided.

 Film: Safe Start, Scene: Watch Out For Others Too
 Film: Danger, Chemicals, Scene: Dangerous to the environment
 Film: Risky Business, Scenes: Assess The Risks and Act On Risks
 Film: Safety Inside and Outside of Work, Scene: An edited section (for
example from the stairs to the football)
2. Group yourselves into 5
 Discuss the hazards shown in the scenes.
 Explain to class what is hazard and risk and give your recommendations on
how to prevent hazards and risks according to the film clips shown
.
Scoring Rubric
15 pts 10 pts. 5 pts.

Content is Content is accurate. Content is
Content and comprehensive and incomplete
Development accurate.
Major points are Major points are
Major points are stated. not clear and /or
stated clearly and are persuasive.
well supported.
Accuracy Major errors in

Students used 5 Students have 4 factual
sentences with sentences with information with 2
accurate, factual accurate, factual or less sentence
information. information.
Students put little
Effort Students put full Students put some or no effort into
effort into this activity effort into this this activity
activity.
Rating Scale
15= Very Good

10= Good
5= Fair
Directions:
In your assignment notebook, identify the hazards shown in the film clips.
Discuss how some risks are more dangerous than others by making a list of the
risks in order of most severe consequences to less severe and which risks
require the most urgent intervention.
IDENTIFIED RISKS RANKING
Congratulations! You did a great job! Rest

and relax a while then move on to the next
lesson. Good luck!
REFERENCES
LO1
 hhtp.//publications




LO 2
http.//publications
LESSON 4
Practice Basic Nail Design
LEARNING OUTCOMES
LO1 Identify nail structure and shapes; and LO2 Create basic nail designs
Definition of Terms
Nail - a plate of keratin that lies on the tips of the fingers and toes
Keratin -a sulfur-containing fibrous protein constituting the main structural protein of hard
epidermal tissues, such as horn , hair, feathers, nails, claws, hoofs, and the like.
Dermis - the second layer of skin, it contains blood vessels, nerves, hair roots and sweat
glands.
Hyponychium - the epithelium of the nail bed , particularly its proximal part in the region of
the nail root and lunula , forming the nail matrix .
Epidermis - the upper or outer layer of the two main layers of cells that make up the skin.
The epidermis is mostly made up of flat, scale-like cells called squamous cells These cells are
round cells called basal cells. The deepest part of the epidermis also contains melanocytes
LEARNING OUTCOME 1
Identify nail structures and shapes
Nail structure and shapes are identified;

Nails are trimmed and varied shapes are applied;
Nails diseases and disorders are identified.
Materials
 Pictures
Let us determine how much you already know about the nail structure and basic nail designs. Take this test.
Pretest LO 1
1
Directions:
3 2
1. Label the different parts of nail.
2. Identify the different shapes of nail.
a) b) c)
d) e)
A. Nail Diseases and Disorders
Directions: Match the statement in column A with column B. Write the letter of your choice on
the space before the number.
Column A Column B
1. a vertical splitting or separation of a. Blue nails
the nail plate layers at the distal
(free) edge of the nail plate
2. extreme thickening curvature of b. Brittle nails
the nails, usually it is caused by
varying degree of hyperkeratosis
3. A condition nail plate which c. Claw nails
separates from the nail bed
4. Nail condition in which the cuticle d. Eggshell nails
splits around the nail.
5. chronic inflammation of the nail fold e. Hangnails
and nail bed (matrix)
6. is referred to ingrown nails which f. Onychauxis or hypertrophy
affect the fingers and toenails
7. infectious disease caused by a g. Onychia
vegetable parasite
8. deformity of nail plate caused by h. Onychocryptosis
biting nails
9. an overgrowth of cuticle which i. Onychomycosis
sticks to the surfaces of nail plate
10. is caused by uneven growth of the j. Onychophagy or bitten nail
nails, usually resulting from illness.
k. Pterygium
l. Ridges
he Information Sheet 1.1 very well then find out how much you can remember and how much you learned by doing Self-check 1.1.
Basic Information About Nail

Nail is a plate of keratin that lies on the tips of the fingers and toes. The main
purpose of the nail is to protect the fingers and toes, however, the fingernail also
assists with certain physical activities in daily life.
Below are the diagrams of the nail and its structure.
Structures of Nail
1. Lunula - the pearly coloured and crescent shaped is due to the cells
being pushed closely together, the blood capillaries cannot be seen
through the lunula because of this.
2. Cuticle - the overlapping epidermis around the nail. It is the
transparent skin, which is called the 'true cuticle', that is removed
during the manicuring process
3. Free edge -the part of the nail that can be filed and shaped. It is an
extension of the nail plate that overlaps the hyponychium
4. Matrix - the only living reproducing part of the nail. This is situated
directly below the cuticle. New cells form here and continually push
towards to produce the nail plate. It also contains blood vessels and
nerves. Blood supply provides the cells with nourishment. If the
matrix is damaged the nail will grow deformed.
5. Nail bed - the part of the nail where the nail plate rests on, also a
continuation of the matrix. It is abundantly supplied with blood
vessels and nerves, having numerous parallel ridges which dovetail
exactly with the ridges on the under surface of the nail plate.
6. Nail walls - the folds of skin that overlap the sides of the nail. They
hold your nail in place and protect the nail plate edges.
7. Nail Plate - is visible nail that rests on the nail bed up to the free
edge. This is made up from dead cells and minimum amount of
moisture. The nail is semi-transparent – allowing the color of blood
supply of the dermis to show.
Shapes of Nail
The shape of nail conforms to that of finger tips of an individual.
1. Oval nail - this is common among people with long, perfect nail beds. It may be
styled slightly rounded at the base and slightly pointed at the fingertips. Most often
this type of nail has a natural look and looks very good in a short-medium length.
2. Round nail - ideal for shorter nails, the nail is allowed to grow out straight at the
sides for approximately 1.5 mm and then the tip is filed into a rounded shape. This is
a strong shape which is great for those who keep their nails short.
3. Stiletto/ pointed nail - filed away at the sides to a point at the tip; this shape is very
weak as the sides of the nail (which provide the strength) are totally lost
4. Squoval - As above, but followed by squaring off the tip, this gives the nail tip
e the most famous among the nail shapes. It is created by allowing the nail to grow out straight and then filing the tip straigh
NAIL DISEASES AND DISORDERS
Nail diseases are conditions of both the nail, and the surrounding skin which result
from bacterial, fungal and viral infections. Some conditions will show a green, yellow or black
discoloration of the nail, depending on the nature of the infection. The main course for
infection is through damaged cuticles and broken skin.
Many disorders can affect the nails. These disorders can affect any portion of the nail
unit and can impact the appearance of the nail plate itself. Nail disorders can r
Given below is a list of the few important nail diseases and disorders and their
characteristics.
Nail Disorders Characteristics
1. Blue nails
It is bluish in color, may be attributed
to poor blood circulation or heart
disorder.
2. Brittle nails
It is a vertical splitting or separation
of the nail plate layers at the distal
(free) edge of the nail plate. Over
exposure to detergent soap and other
chemical solvents may attribute to the
effect.
3. Bruised nails It shows dark purplish (almost

black or brown) spots in the nail.
This is usually due to injury and
bleeding of the nail bed. As the nail
grows, dried blood in the nail bed will
also go out.
4. Eggshell nails The nail plate separates from the nail-

bed and curves at the free edge. It may
be caused by chronic illness of the
systemic or nervous origin.
5. Furrows These are long ridges that run either

lengthwise or across the nail. Some
lengthwise ridges are normal in adults.
These ridges increase with age and can
also be caused by psoriasis, poor
circulation and frostbite.
Ridges that run across the nail are
caused by high fevers, pregnancy &
measles.
6. Hangnails It is a condition in which the cuticle
splits around the nail. Carelessness in
removing the cuticle, dryness, cutting
off too much may result in hangnails. It
may cause infection if not treated.
7. Leconychia or White spot appears frequently in the

white spot nails. They may be caused by injury to
the base of the nail. As the nail
continues to grow, these white spots
eventually disappear
8. Pterygium It is an overgrowth of cuticle which

sticks to the surfaces of nail plate.
Carefully remove the adhering growth
by means of a cuticle nipper.
9. Onychatrophia It is describe as wasting away of the

nail . The nail loses its luster, shrinks
and falls This can be caused by injury
to the nail matrix or by internal disease.
10. Onychauxis It is an overgrowth of the nail usually in

or hypertrophy thickness rather than length. It is
caused by an internal imbalance, such
as local infection or heredity.
11. Onychophagy It is a deformity of nail plate caused by

or bitten nail biting nails. It is an acquired nervous
habit which prompts the individual to
chew the nail or the hardened cuticle.
12. Onychorrhexis It refers to split or brittle nails caused

or split or brittle by an injury to the finger, careless filing
nails of the nails, excessive use of cuticle
solvents and nail polish removers. The
nails may be extremely dry because of
some granular disorder..

13. Ridges
It is caused by uneven growth of the
nails, usually resulting from illness.
Buffing the nails with paste polish will
help remove ridges.
14. Treating cuts It is caused by an accident during

manicure service. Apply an antiseptic
immediately. Do not apply nail polish
on the affected area
Nail Diseases Characteristics

1. Onychomycosis It is an infectious disease caused by a
vegetable parasite. The onset of the
disease takes about two to three
months and the attack is rarely on
more than one or two nails. The
appearance of the nail is frayed (worn
out), brittle with furrowed surface,
opaque, grayish, or yellowish in color
and is lifted-up by an accumulation of
epidermis underneath.
2. Onychia Is a term applicable to chronic
inflammation of the nail fold and nail
bed (matrix). It results from the
introduction of microscopic
pathogen through small wounds.
3. Onychocryptosis It is referred to ingrown nails which
affect the fingers and toenails. It is
marked by nail growth into surrounding
tissues and may cause infection.
Incorrect trimming a shaping of nails
are often responsible for ingrown nails.
4. Onychoptosis It is the periodic shedding of one or

more nails, either in the whole or in
part. This condition maybe a symptom
of a more alarm disease such as
syphilis or can result from fever, trauma
systematic upset or adverse reaction to
drug
5. Onycholysis
It refers to the detachment of the nail
from the nail bed, starting at its distal
and/or lateral attachment. The most
common cause of onycholysis is
psoriasis
6. Onychogryphosis It pertains to extreme thickening
or claw nails curvature of the nails, usually it is
caused by varying degree of
hyperkeratosis (skin disease in which
the skin gets thicker) on the distal
portion of the nail bed that detaches
and lifts the plate off the bed
Self-Check 1.1
Test 1. ENUMERATION:
Directions: Enumerate the following items listed below.
A. Parts surrounding the nail
B. Shapes of nails
Test II. FILL IN THE BLANK
Directions: Fill in the blanks with the correct answer.
1. Free edge is the part of the nail that can be filed and shaped. It is an extension of the
that overlaps the hyponychium.
2 are the folds of skin that overlap the sides of the nail. It holds your nail in
place and protects the nail plate edges.
3. Nail bed is the part of the nail that the nail plate on, also a continuation
of the matrix. It is abundantly supplied with blood vessels and nerves, having numerous
parallel ridges which dovetail exactly with the ridges on the under surface of the nail plate.
4. Matrix is the only living reproducing part of the nail, this is situated directly below the
. New cells form here and continually push towards to produce the nail
plate. It also contains blood vessels and nerves. Blood supply provides the cells with
nourishment. If the matrix is damaged the nail will grow deformed.
5. is a visible nail that rests on the nail bed up to the free edge. This is made
up from dead cells and minimum amount of moisture.
COMPLETION TEST
Directions: Each sentence below has a blank space; each blank indicates that
something has been omitted. Inside the box are words that fits the meaning of the
sentence as a whole. Write your answers on the space provided for.
Hyperkeratosis Bluish
Onychia Uneven Eggshell nails Furrows

Treating cuts Shedding Detachment
Hangnail
1. are long ridges that run either lengthwise or across the nail.
2. is a term applicable to chronic inflammation of the nail fold and
nail bed .
3. Onychogryphosis pertains to extreme thickening curvature of the nails,
usually it is caused by varying degree of .
4. Onychoptosis is the periodic of one or more nails, either in the
whole or in part.
5. Ridges are caused by growth of the nails, usually resulting from
illness
6. Blue nail is in color, may be attributed to poor blood circulation
or heart disorder.
7. are caused by an accident during manicure service.
8. is a condition in which the cuticle splits around the nail
9. separates from the nail-bed and curves at the free edge.
10. Onycholysis refers to the of the nail from the nail bed, starting at
its distal and/or lateral attachment

Operation Sheet 1.1
Trim your nails

Trimming of nail plays a very vital role. It is very easy task but sometime it causes little
problems such as unwanted abrasions and ingrown nails, when done not properly Apply the
following steps while cutting nails.
Step 01:
Prepare the types of instruments for this task. Nail cutter, who has small or medium slightly
curved blades, which are suitable for trimming the finger nails. Nail cutters with straight
blades are suitable for use.
Step 02:
Before using your nail cutter, make sure that it is clean. Wash your nail cutter to remove dust
and germs, specially when you are sharing your nail cutter with someone else. Dry
thoroughly after washing it.
Step 03:
Wash your hands. Wipe dry with any towel or tissue paper to remove extra water. This
process cleans your fingernails, and beside cleaning fingernails it also helps in softening
your nails and easier to cut them
Step 04:
You must cut your nails in a place where you can clearly see what you are doing. Put a small
container near you in which you can collect the nails.
Step 05:
Decide the shape of your nails. Decide which shape you actually want. After deciding, lift the
nail cutter and start cutting your nails.
Step 06:
Start cutting your nails starting from your little finger,
Step 07
Click on the nail cutter that can cut through the nail. You can make at least two or three cuts
of a finger nail until everything is snug. Follow the curve of the nail to get a clean cut. Check
skin flaps after each cut and remove carefully.
Step 08:
Sit comfortably and crouch your knee side to easily reach up and see the nails clearly. Be
sure not to set up deep razor to prevent scratches. Adjust the position of razor if you feel any
discomfort.

Step 09:
After cutting your nails, use a nail file to smooth any rough and odd surface of newly trimmed
nails. When you file, do it in on tilt – from the corner of the nail to go down.
Step 10:
Apply some moisturizer on your hands to keep the cuticles moisturized and smooth.
Criteria for Judging Points Score

General Appearance 35
 Different nail shapes are applied
 proportion of the different nail shapes
were observed
Workmanship 35
 neatness in work were observed
Cleanliness 20
 work area is cleaned
Speed 10
 finished based on allotted time
TOTAL
LEARNING OUTCOME 2
Create Basic Nail Designs
Different basic nail designs are explained and demonstrated thru visuals ;and
Different basic nail designs are created in mock nails.
Materials
 Pictures
Let us determine how much you already know about the different basic nail designs. Take this test.
I. Directions: Identification. Identify the names of the following basic nail designs
.
1. 2.
3. 4. 5.
Different basic nail designs

The following are basic nail designs which you can offer in a nail salon. Steps and
illustrations are shown below.
A. Plain manicure
It is the traditional application of nail polish to the entire nail plate.
Steps in Plain manicure

1. Apply base coat
 Begin with little finger of one hand. Repeat polish application on the other
hand
2. Apply two coats of polish
 Use light long strokes from nail base to free edge
 Apply polish to the middle of the nail first and then to the sides.
 Repeat second coat of polish to both hands
 Remove excess polish around nail with a cotton tipped orangewood stick
3. Apply top coat
 Apply a top coat over the entire nail plate .
Tips
Learn the history of color by buying an artist color wheel. You can use
what you learn to help clients select complementary colors that match
their skin tone.
B. Half-Moon
Half moon is a style that involves applying of nail polish over the whole nail
plate except the area of lunula.
Steps in giving Half-moon nail design

1. Apply base coat
2. Apply white or platinum nail polish and leave for a few
minutes to dry.
3. Apply colored polish from one side to the other side of the nail following the shape of the
lunula. Repeat the application of the nail polish if necessary.
4. Remove excess polish from the skin .

5. Apply top coat.
C. Half- Moon with Tip

It involves the application of colored polish over the whole nail plate except the
area of lunula and tip of the nail.
Steps in Giving Half-moon with Tip

1. Apply base coat
minutes to dry
3. . Apply colored nail polish from one side to the other side of the nail to form a half-moon,
leaving the lunula of the nail Leave the part of the free edge. The free edge should be
seen. as in fig 5.Repeat the application of nail polish if necessary.
4. Remove excess polish

5. Apply top coat..
C .French Manicure or Tip design :
It is a design which involves the application of colored polish over the whole
part of the nail except the area of the free-edge.
Steps in giving French Manicure-Variation no. 1

1. Apply base coat and leave for a few minutes to dry.
minutes to dry.
3. Apply colored nail polish from one side to the other side of the nail following the shape
of the free- edge . Repeat the application of nail polish if necessary

5. Apply top coat.
French Manicure or Tip design - Variation no. 2
It involves the application of white nail polish or colored polish on the tips and
coating the rest of the nail with a sheer polish . It’s suitable for short nails and those
with moderate length of nails
Steps in giving French manicure-Variation no. 2
1. Apply base coat and leave for a few minutes

2. Apply a coat of translucent pink polish over your entire nail.
3. With the use of white or colored nail polish, draw a thin
line over the tip of the nail following the shape of the free
edge of the nail. Apply second coating if necessary.
4. Remove excess polish.
5. Apply top coat.
E. Elephant Tusk
Elephant tusk is a style that involves the application of nail
polish to create S curve, leaving a slightly larger gap along the
nail walls.
Steps in making Elephant Tusk:
a) Apply white or platinum nail polish and leave for a few

minutes to dry.
b) Apply colored nail polish creating a half circle design at

the inner side of the nail as you continue it to form S-like.
c) Fill up the other side to complete the design.

d) Remove excess polish.
e) Seal with a top coat.
Self-Check 2.1
Directions: Identify the following nail designs: Write your answer on the blank before
each number.
1. It is the traditional application of nail polish to the entire nail plate.
2. It involves the application of colored polish over the whole nail plate
except the area of lunula and tip of the toe nail.
3. It is a style that involves applying of nail polish over the whole nail
plate except the area of lunula.
4. It is a style that involves the application of nail polish to create S

curve, leaving a slightly lager gap along the nail walls.
5. It is a design which involves the application of colored polish over
the whole part of the nail except the area of the free-edge.
Operation Sheet 1.1
Objectives:
To learn the techniques in applying Plain manicure, Half- moon, Half-moon with tip,
French manicure, and Elephant tusk designs using plastic spoons thru group activity.
Equipment tools and materials:

Base coat, Colored polish, Top coat, Acetone, Cotton, Orange wood stick, Plastic
spoons
Directions:
1. Prepare all the materials needed in basic nail designs.
2. Follow the given instructions in every nail designs
3. Consider the size, color, shapes of your plastic spoons when doing your project.
4. Display your finished project on used illustration board .
A. Plain manicure
Steps in Plain manicure

1. Apply base coat
2. Apply two coats of polish
3. Apply top coat
B. Half-moon
Steps in giving Half-moon:
2. Apply white or platinum nail polish and leave for a few minutes to dry.
3. Apply colored polish from one side to the other side of the nail following the shape
of the lunula.. Repeat the application of nail polish if necessary.
4. Remove excess polish from the skin.
5. Apply top coat.

C. Half- moon with Tip
Steps in Giving Half-moon with Tip

1. Apply white or platinum nail polish and leave for a few minutes to dry.
2. Apply colored polish from one side to the other side of the nail to form the half-
moon, leaving the lunula of the nail.
4. Apply top coat..
D. French Manicure
French design or Tip design : Variation no. 1
1. Apply white or platinum polish and leave for a few

minutes to dry.
2. Apply colored polish from one side to the other side following the shape of the
free- edge .
4. Apply top coat.
French design or Tip design - Variation no. 2
1. Apply base coat and leave for a few minutes

2. Apply a coat of translucent pink polish over your entire nail.
3. With the use of white or platinum nail polish, draw a thin line over the tip of the nail
following the shape of the free edge of the nail. Apply second coating if necessary.
4. Remove excess polish.
5. Apply top coat
D. Elephant Tusk
Steps in making Elephant Tusk:

a) Apply base coat (platinum) twice.
b) Apply colored nail polish creating a half circle design at
the inner side of the nail as you continue it to form S-
like.
c) Fill up the other side to complete the design.
d) Remove excess polish.
e) Seal with a top coat.
Find out by accomplishing the Score Card honestly and sincerely. Remember it is your learning at stake!
Criteria for Judging Points Score

General Appearance 35
 color combinations of nail polish
are evident
 nail designs were artistically
applied
 proportion of the different nail
designs were observed
Workmanship 35
 nail polish coat were evenly
applied
 neatness in work were observed
Quality 20
 durability of the finished project
were observed
Speed 10
 finished and submitted on the
required time
TOTAL
Rating Scale
95-100 =Outstanding
85-94 =Very satisfactory
75-84 =Satisfactory
65-74 =Needs improvement

Good luck!

REFERENCES
Lo1
kreativestudios.com
LO 2
kreativestudios.com
ANSWER KEYS:
LESSON 1
LO1
WHAT DO YOU ALREADY KNOW?
1. Cuticle Nail Pusher
2. Nail File
3. Sterilizer
4. Orangewood Stick
5. Hand Spa Machine
6. Buffer
7. Pumice Stone
8. Trolley
9. Alcohol
10. Base coat
HOW MUCH HAVE YOU LEARNED?
1. Cuticle Nail Pusher

2. Nail File
3. Nail Cutter/Nail Clipper/Nail Trimmer
4. Nail Buffer
5. Emery board
6. Orangewood Stick
7. Foot Spa Machine
8. Sterilizer
9. Foot Spa Stool
10. Hand Spa Machine
LO2
1. D
2. C
3. E
4. B
5. A
6. I
7. J
8. H
9. F
10. G
1. To avoid cracking and splitting of the nails.

2. So that live tissue at the root of the nail will not be injured.
3. Buffing gives the nails natural gloss and increases the circulation of the blood to the
fingernails.
4. So as not to injure live tissues.
5. It can cause sores, open wounds and possible infection.
LESSON 2
LO1
A.
1. C
2. D
3. C
4. A
5. A
B.
1. Sanitizing implements and equipment is essential because it kills and prevents the
growth of germs. Unsanitized equipment can spread germs from one person to another,
potentially leading to serious infections. both for you and your client .
2. Sterilization is the process of destroying all living micro-organisms while sanitation is
the process of destroying some, but not all micro-organisms.
1. Before and after each nail care service.
2. After metal tools and equipment have been sterilized, they must be stored in
a cabinet until needed.
3. Waste materials should be disposed of properly in an enclosed bin with polythene

bag while contaminated materials should be disposed of as recommended by local
authority.
4. To prevent accidents, injury and possible spread of diseases and to give the highest
professional nail care service.
5. Tools and equipment are in good condition when they are not defective and can be
used efficiently. They are not in good condition if they are already faulty, rusty and do
not function efficiently.
LO2
A.
1. Sterilize
2. Disinfect
3. Boil
4. Store
5. Inspect
6. Sanitary
7. Water
8. Enclosed
9. Laundered
10. Directed
Ways to Keep Tools and Equipment Safe and Functional
a. Sterilize metal implements after each use in a hospital-grade disinfectant that is

bactericidal, virucidal, and fungicidal. This disinfectant can be found in beauty supply
stores. Immerse the tools in the disinfectant for 10 minutes.
b. Disinfect foot basins after each use with a bleach solution. Make a 1-to-10 solution by
mixing one part bleach with 10 parts water. Using gloves, rinse the basin with the
solution to disinfect. If necessary, scrub with a detergent to remove any dirt or debris.
c. Use a boiling method of sterilization once a month to disinfect all metal implements.
Designate one pot for sterilization to prevent cross-contamination with food.
Submerge the tools in boiling water for 10 minutes. Drain the tools and allow them to
dry.
d. Store sterilized metal implements in an airtight, zipper-sealed bag to keep them from
being exposed to dirt and bacteria. Be sure tools are completely dry before storing
them. If waiting more than a couple of weeks before the next nail care service,
sterilize the tools again before use.
e. Inspect tools and equipment regularly to identify defective ones for repair,
replacement or condemnation.
Measures in Keeping the Salon Clean and in a Safe State
1. All beauty salons must be well-lighted and well-ventilated and must be in good
sanitary condition.
2. The salon premises must be free from rodents, vermin, flies or other similar insects.
3. All salon establishments must be provided with continuous running hot and cold
water.
4. The curtains and floor coverings in the salon must be washable and kept clean.
5. All hair, used cotton or other waste materials must be removed from the floor
6. The rest rooms must be well-sanitized and be provided with individual towels.
7. All waste materials should be disposed of in an enclosed waste bin fitted
with polythene bin liner, durable enough to resist tearing.
LO3
1. Plastic
2. T
3. T
4. T
5. Repaired/replaced/disposed of
Metal tools and instruments must be sterilized following proper sterilization

techniques. After the process, store in a dry cabinet until needed. Tools/Implements
which are made of porous materials such as nail files, buffers, nail brushes and
orangewood sticks can harbor bacteria easily. Since they are wood products which
cannot be sterilized, these tools should not be reused. The hand and foot spa
machines must be kept dry after disinfecting them.
LESSON 3
ANSWER KEYS:
LO1
1. Risk
2.Harm
3.Risk assessment
4. Training
5. Unsafe practices
1.True
2.True
3.True
4. True
5. False
6. True
7. False
8. True
9. True
10.True
LO2

1. Identify the spillage to everyone and clean up appropriately
2. All of the above
3. Assist your client to the nearest exit and safe place
4. Preventing injury, infection or accidents
5. Unsafe practices
1. Microorganism
2. Injury
3. Reduction
4. Clear
5. Slips
6.Illness
7. Burns
8. Health
9. Syndrome
10. Airborne
LESSON 4
LO1.
LO1.
Test 1
Test ll.
1 Stiletto
2. Squoval
3. Round
4. Square
5. Oval/Almond
Test lll.
1. B
2. D
3. K
4. J
5. L
6. E
7. G
8. H
9. C
10.I
Test 1.
A.
B
1. Oval
2. Pointed
3. Square
4. Round
5. Squoval
Test II.
A. FILL IN THE BLANK
1. Nail plate
2. Nail walls
3. Rest
4. Cuticle
5. Nail plate
B. Completion Test
1. Furrows
2. Onychia
3. Hyperkeratosis
4. Shedding
5. Uneven
6. Bluish
7. Treating Cuts
8. Hangnails
9. Eggshell nails
10. Detachment
LO2.
1. Half -moon with Tip

2. French Manicure
3. Plain manicure
4. Half moon
5. Elephant tusk
1. Plain Manicure
2. Half-Moon with Tip
3. Half Moon
4. Elephant Tusk
5. French Manicure

Acknowledgement
This Learning Module was developed for the Exploratory Courses in Technology and
Livelihood Education, Grades 7 and 8 of the K to 12 Curriculum with the assistance of the
following persons:
This Learning Module on Nail Care was developed by the following personnel:
MODULE WRITERS
BEATRIZ A. ADRIANO ANNABEL L. GUARDIAN

Principal IV Head Teacher III
E. Rodriguez Voc'l High School Carlos L. Albert High School
Nagtahan, Manila Brixton Hill, Santol, Quezon City
REVIEWERS
GIL P. CASUGA
Chief TESD
Specialist
REYNALDO S. DANTES MARIA A. ROQUE
Senior TESD Specialist Senior TESD Specialist
BERNADETTE S. AUDIJE VICTORIO N. MEDRANO

Senior TESD Specialist Principal IV, SPRCNHS
PARALUMAN R. GIRON, Ed.D. BRENDA B. CORPUZ, Ph.D.
Chair, Sub-TWG on K to 10 TA for K to 12 Curriculum
OFELIA O. FLOJO BEATRIZ A. ADRIANO
Retired Assistant Chief, EED, Region IV-A Principal IV, ERVHS
AIDA T. GALURA DOMINGA CAROLINA F. CHAVEZ
VSA II, ACNTS Principal II, MBHS
DOCUMENTORS / SECRETARIAT
PRISCILLA E. ONG
K to 12 Secretariat FREDERICK G. DEL ROSARIO
Head Teacher III, BNAHS
EMMANUEL V. DIONISIO
Head Teacher III, AFGBMTS LYMWEL P. LOPEZ
Teacher I, AFGBMTS
DANTE D. VERMON JR.
Teacher I, AFGBMTS LOUIE ANGELES
Teacher I, BNAHS
JOANNA LISA C. CARPIO
Teacher I, BNAHS ROMANO T. LOPEZ
Teacher I, BNAHS
Dir. IMELDA B. TAGANAS

Executive Director, Qualifications Standards Office
K to 12 Learning Area Team Convenor, TLE/TVE

Nail Care

Uploaded by

Document Informationclick to expand document information

Copyright:

Available Formats

Nail Care

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Read this document in other languages

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Nail Care

Uploaded by

Copyright:

Available Formats

Republic of the Philippines

K to 12 Basic Education Curriculum

What is this Module About?.................................................................................2

How do you Use this Module?............................................................................3

LESSON 1 – Use of Nail Care Tools and Equipment.............................4 - 35

LESSON 2 – Maintain Tools and Equipment........................................36 - 61

LESSON 3 – Practice Occupational Health and Safety Procedure...........62 - 89

LESSON 4 – Practice Basic Nail Designs.............................................90 - 113

Answer Keys.........................................................................................114 - 120

BEAUTY CARE (NAIL CARE) SERVICES

Welcome to the world of Beauty Care (Nail Care) Services!

1) Use of Nail Care Tools and Equipment;

Lesson 1 – Use of Nail Care Tools and Equipment

Lesson 2 – Maintain Tools and Equipment

Lesson 3 – Practice Occupational Health and Safety Procedure

Lesson 4 – Practice basic nail designs

This Module has 4 Lessons. Each Lesson has the following:

Dispose of - to throw away

Implements - articles or tools used in manicuring that are durable

Infection - a condition caused by a germ or a pathogen

Pathogen - a microbe or microorganism such as a virus, bacterium, prion, or fungus that

Disinfectant - an agent, such as heat, radiation, or a chemical, that destroys, neutralizes, or

Moisten - make wet or damp

 Hand tools, equipment and specifications

What Do You Already Know?

1. A tool that is used to push back or loosen the cuticles.

7. A type of volcanic rock used to remove callouses.

9. It is an organic compound used as sanitizer in nail salons.

Information Sheet 1.1

NAIL CARE TOOLS AND EQUIPMENT

Callous Remover is a tool designed

Cuticle Nail Pusher is a tool used to push

Cuticle Nipper is an implement

Cuticle Scissor is an implement

Foot file is made of metal or sandpaper,

Foot Spa Basin is a large rectangular

Manicure Tray is a flat container where all

Manicure Nail Brush is a plastic handled

Mixing bowl is a small open-top, rounded

Nail Cutter / Nail Clipper / Nail Trimmer

Nail File is an implement used to shape the

Orangewood Stick is an implement with

Pedicure Nail Brush is a tool used to

Plastic Container for Cotton is a small

Supply Tray is a flat container that holds the

Trolley is a wheeled cart that is pushed by

Alcohol is an organic compound used as sanitizer.

Apron is an outer protective garment that covers

Assorted Colored Nail Polish is a lacquer applied

Base Coat is a clear layer of polish applied to the

Benzalconium Chloride is a yellow-white powder

Bleaching Soap is a soap formulated to

Cotton is a soft white downy fiber for dubbing

Cuticle Oil is a mixture of fats and waxes

Cuticle Remover is a liquid used to soften nail

Disinfectant is an agent, such as heat, radiation,

Emery board is a wooden, sand paper-like stick with