Dell E176FPc

Service Manual

17” LCD MONITOR

DELL E176FPc

THESE DOCUMENTS ARE FOR REPAIR SERVICE INFORMATION ONLY.EVERY REASONABLE EFFORT
HAS BEEN MADE TO ENSURE THE ACCURACY OF THIS MANUAL; WE CANNOT GUARANTEE THE
ACCURACY OFTHIS INFORMATION AFTER THE DATE OF PUBLICATION AND DISCLAIMS RELIABILITY FOR
CHANGES, ERRORS OR OMISSIONS.

1
 Dell E176FPc

Revision List
Revision Release Date Revise history TPV model

T780KCDHK8DLNP

A00 Aug.-26-2005 Initial Release T780KGDHK8DZNP

T780KGDHK8DENP

A01 Mar.-31-2006 Add” Definition Of Pixel Defects”

Add” Max Brightness measurement”

A02 April-25-2006
on Page49

A03 Mar.-30-2007 Add Mechanical Instruction in item 6

Add the CBPC,PWPC Version

A04 Dec.-20--2007 information in BOM list All

2
 Dell E176FPc
Table of contents
Table of contents ---------------------------------------------------------------------------------------------------------------- 03
1. Monitor Specifications ------------------------------------------------------------------------------------------------------04
2. LCD Monitor Description -------------------------------------------------------------------------------------------------- 05
3. Operation instructions --------------------------------------------------------------------------------------------------06
3.1 General Instructions ------------------------------------------------------------------------------------------------06
3.2 Control buttons --------------------------------------------------------------------------------------------------------06
3.3 On Screen Menu/Display (OSD) ---------------------------------------------------------------------------------------07
3.4 Adjusting the Picture - ----------------------------------------------------------------------------------------------08
4. Input/Output Specification ---------------------------------------------------------------------------------------------------13
4.1 Input Signal Connector --------------------------------------------------------------------------------------------13
4.2 Factory Preset Display Modes ----------------------------------------------------------------------------------------- 13
4.3 Power Supply Requirements ---------------------------------------------------------------------------------------- 14
4.4 Panel Specification ----------------------------------------------------------------------------------------------------- 15
5. Block Diagram ----------------------------------------------------------------------------------------------------------------18
5.1 Monitor Exploded View -----------------------------------------------------------------------------------------------18
5.2 Software Flow Chart ----------------------------------------------------------------------------------------------------19
5.3 Electrical Block Diagram ----------------------------------------------------------------------------------------------21
6. Mechanical Instruction ------------------------------------------------------------------------------------------------------23
7. Schematic Diagram -------------------------------------------------------------------------------------------------------------28
7.1 Main Board ---------------------------------------------------------------------------------------------------------------28
7.2 Power Board ---------------------------------------------------------------------------------------------------------------33
8. Layout ---------------------------------------------------------------------------------------------------------------------------- 35
8.1 Main Board ---------------------------------------------------------------------------------------------------------------- 35
8.2 Power Board -------------------------------------------------------------------------------------------------------------- 37
8.3 Key Board ----------------------------------------------------------------------------------------------------------------- 40
9. Maintainability ----------------------------------------------------------------------------------------------------------- 41
9.1 Equipments and Tools Requirement -------------------------------------------------------------------------------- 41
9.2 Trouble Shooting ------------------------------------------------------------------------------------------------------ 42
10. White Balance Adjustment --------------------------------------------------------------------------------------------- 48
11. EDID Content --------------------------------------------------------------------------------------------------------------- 49
12. ISP User Manual --------------------------------------------------------------------------------------------------------- 50
12.1 Connect ISP Writer preparation action ---------------------------------------------------------------------- 50
12.2 To Use ISP WRITER ------------------------------------------------------------------------------------------------ 51
12.3 Executing ISP -------------------------------------------------------------------------------------------------------------55
13. Check List --------------------------------------------------------------------------------------------------------------------56
14. BOM List ----------------------------------------------------------------------------------------------------------------- 59
15. Definition Of Pixel Defects-------------------------------------------------------------------------------------------------- 70
3
 Dell E176FPc
1. Monitor Specifications
Screen type Active matrix - TFT LCD

LM170E01-TLB3/TLB4 (LPL)
Panel Type
CLAA170EA07 (CPT)

Size 430mm(17.0")
LCD Panel
Pixel pitch 0.264mm(H) x 0.264mm(V)

Viewable angle LM170E01-TLB3/TLB4: 70°/70° (H) 75°/65° (V) (typ.)

(CR>=10) CLAA170EA07: 70°/70° (H) 67°/63° (V) (typ.)

LM170E01-TLB3/TLB4: 8ms(type)
Response time
CLAA170EA07: 12ms(type)
Video R, G, B Analog Interface

Separate Sync H/V TTL

Input
H-Frequency 30kHz – 80kHz

V-Frequency 55 - 75Hz

Display Colors 16.2M Colors

Dot Clock 135MHz(Max)

Max. Resolution 1280 x 1024

Plug & Play VESA DDC

<45W
®
ON Mode
EPA ENERGY STAR
OFF Mode <2W
Input Connector D-Sub 15pin
Analog:0. 7Vp-p(standard)
Input Video Signal
75 OHM, Positive
Horizontal : 337.92mm
Maximum Screen Size
Vertical: 270.336mm

Power Source 100 V ~ 240 V± 10 %VAC, 50 ± 3Hz, 60 ± 3Hz

Operating Temp: 5° to 35°C
Environmental
Operating Humidity: 10% to 80%
Considerations
Storage Temp.: -20° to 60°C
Monitor (Stand and Head): 5.2kg (11.5 lb)

Weight Monitor Flat panel only (VESA Mode): 4.0 kg (8.8 lb)

Weight with packaging: 6.4 kg (14.1 lb)

4
 Dell E176FPc
2. LCD Monitor Description
The LCD MONITOR will contain a main board, PWPC board, keypad board, which house the flat panel control
logic, brightness control logic and DDC.
The power board will provide AC to DC Inverter voltage to drive the backlight of panel and the main board
chips each voltage.

Monitor Block Diagram

CCFL Drive. Flat Panel and

CCFL backlight

RS232 Connector
PWPC board Main Board
For white balance
adjustment in factory
mode
Keyboard

Video signal, DDC

AC-IN
HOST Computer
100-240V

5
3. Operation instructions
3.1 General Instructions
Press the power button to turn the monitor on or off. The other control buttons are located at front panel of the
monitor. By changing these settings, the picture can be adjusted to your personal preferences.
- The power cord should be connected.
- Connect the video cable from the monitor to the video card.
- Press the power button to turn on the monitor, the power indicator will light up.
3.2 Control Buttons

1 Menu selection button

2 Brightness Contrast / Down (-) button

3 Auto-Adjust / Up (+) button

4 Power button On/Off button with indicator

A The 'MENU' button is used to open the on-screen display (OSD), select
function icons, exit from menus and sub-menus, and to exit the OSD.
See Accessing the Menu System.
MENU

B Use this button for direct access to the 'Brightness' and 'Contrast' control
menu.

Brightness/Contrast Hot Key

BC Use these buttons to adjust (decrease/increase ranges) items in the OSD.

- and + buttons

C Use this button to activate automatic setup and adjustment. The following
dialog will appear on screen as the monitor self-adjusts to the current input:

Auto Adjust In Progress

Auto Adjust
Auto Adjustment button allows the monitor to self-adjust to the
incoming video signal. After using 'Auto Adjustment', you can further tune
your monitor by using the 'Pixel Clock' and 'Phase' controls in the OSD.

D The green LED indicates the monitor is on and fully functional. An amber
LED indicates DPMS power save mode.
Power Button & Indicator The Power button turns the monitor on and off.

6
 Dell E176FPc
3.3 On Screen Menu/Display (OSD)
Direct-Access Functions

Function Adjustment Method

Auto adjustment Use this button to activate automatic setup and

adjustment. The following dialog will appear on
screen as the monitor self-adjusts to the current
input:

Auto Adjust In Progress

Auto Adjustment button allows the monitor to

self-adjust to the incoming video signal. After using
'Auto Adjustment', you can further tune your monitor
by using the 'Pixel Clock' and 'Phase' controls in the
OSD.

NOTE: Auto Adjust will not occur if you press

the button while there are no active video input
signals, or attached cables

Brightness / Contrast
With the menu off, push button to display the

'Brightness' and 'Contrast' adjustment menu.

The 'Brightness' function adjusts the luminance of the
flat panel.
Adjust 'Brightness' first, then adjust 'Contrast' only if
further adjustment is necessary.
"+" increase 'brightness'
" - "decrease 'brightness'
The 'Contrast' function adjusts the degree of
difference between darkness and lightness on the
display screen.
"+" increase the 'contrast'
"-" decrease the 'contrast'

7
 Dell E176FPc
3.4 Adjusting the Picture

1. With the menu off, push the 'MENU' button to open the OSD system and display the main features menu.

A Function icons B Main Menu C Menu icon

D Sub-Menu name E Resolution

2. Push the - and + buttons to move between the function icons. As you move from one icon to another, the
function name is highlighted to reflect the function or group of functions (sub-menus) represented by that
icon. See the table below for a complete list of all the functions available for the monitor.
3. Push the 'MENU' button once to activate the highlighted function; Push -/+ to select the desired parameter,
push menu to enter the slide bar. Then use the - and + buttons, according to the indicators on the menu, to
make your changes.
4. Push the 'Menu' button once to return to the main menu to select another function or push the ‘Menu’
button two or three times to exit from the OSD.

8
 Dell E176FPc

Icon Menu Name and Description

Sub-menus

EXIT This is used to exit out of the 'Main menu'.

Positioning: 'Positioning' moves the viewing area around on the monitor screen.
Horizontal When making changes to either the 'Horizontal' or 'Vertical' settings, no changes will
Vertical occur to the size of the viewing area; the image will simply be shifted in response to
your selection/change.
Minimum is '0' (-). Maximum is '100' (+).

Image settings:

Auto Adjust Even though your computer system can recognize your new flat panel monitor on
startup, the 'Auto Adjustment' function will optimize the display settings for use with
your particular setup.

NOTE: In most cases, 'Auto Adjust' will produce the best image for your
configuration; this function can be directly access via Auto Adjustment

hotkey.

Pixel Clock The 'Phase' and 'Pixel Clock' adjustments allow you to more closely adjust your monitor
to your preference. These settings are accessed through the main OSD menu, by
selecting 'Image Settings'.
Use the - and + buttons to adjust away interference. Minimum: 0 ~ Maximum: 100

9
 Dell E176FPc
Phase If satisfactory results are not obtained using the 'Phase' adjustment, use the 'Pixel
Clock' adjustment and then use 'Phase' again.

NOTE: This function may change the width of the display image. Use the
'Horizontal' function of the 'Position' menu to center the display image on the
screen.

Color Settings: 'Color Settings' adjusts the color temperature and saturation.

Normal Preset 'Normal Preset' is selected to obtain the default (factory) color settings.

Blue Preset 'Blue Preset' is selected to obtain a bluish tint. This color setting is typically used for text
based applications (Spreadsheets, Programming, Text Editors etc.).

Red Preset 'Red Preset' is selected to obtain a redder tint. This color setting is typically used for
color intensive applications (Photograph Image Editing, Multimedia, Movies etc.).

10
 Dell E176FPc
User Preset 'User Preset': Use the plus and minus buttons to increase or decrease each of the
three colors (R, G, B) independently, in single digit increments, from '0' to '100'.

NOTE: 'Color temperature' is a measure of the 'warmth' of the image colors

(red/green/blue). The two available presets ('Blue' and 'Red') favor blue and red
accordingly. Select each one to see how each range suits your eye; or utilize the
'User Preset' option to customize the color settings to your exact choice.

OSD Settings: Each time the OSD opens, it displays in the same location on the screen. 'OSD
Settings' (horizontal/vertical) provides control over this location.

Horizontal Position - and + buttons move OSD to the left and right.

Vertical Position - and + buttons move OSD down and up.

OSD Hold Time: The OSD stays active for as long as it is in use.
'OSD Hold Time': Sets the length of time the OSD will remain active after the last time
you pressed a button.
Use the - and + buttons to adjust the slider in 5 second increments, from 5 to 60
seconds.

NOTE: Default 'OSD hold time' is 20 seconds.

OSD Lock 'OSD Lock': Controls user access to adjustments. When 'Yes' (+) is selected, no user
adjustments are allowed. All buttons are locked except the menu button.
All buttons can be locked or unlocked press the 'Menu' button for over 15 seconds. to
unlock the OSD 'Menu'.

NOTE: When the OSD is locked, pressing the 'Menu' button will take the user
directly to the 'OSD settings' menu, with 'OSD Lock' preselected on entry. Select
'No'(-) to unlock and allow user access to all applicable settings.

11
 Dell E176FPc

Language: Language sets the OSD to display in one of five languages (English, Español,
Français, Deutsch, Japanese).

NOTE: The language chosen affects only the language of the OSD. It has no
effect on any software running on the computer.

Factory Reset: 'Factory Reset' returns the settings to the factory preset values for the selected group
of functions. 'Exit' is used to exit out of 'Factory Reset' menu.
For 'All settings', all user adjustable settings are reset at one time except 'Language
settings'.

OSD Warning Messages

A warning message may appear on the screen indicating that the monitor is out of sync.

Cannot Display This Video Mode

Optimum resolution 1280 x1024 60Hz

This means that the monitor cannot synchronize with the signal that it is receiving from the computer. Either the
signal is too high or too low for the monitor to use. See Specifications for the Horizontal and Vertical frequency
ranges addressable by this monitor. Recommended mode is 1280 X 1024 @ 60Hz.

NOTE: The floating 'Dell - self-test Feature Check' dialog will appear on-screen if the monitor cannot sense a
video signal.

Occasionally, no warning message appears, but the screen is blank. This could also indicate that the monitor is not
synchronizing with the computer. See Troubleshooting for more information.

12
 Dell E176FPc
4. Input/Output Specification
4.1 Input Signal Connector

PIN NO. DESCRIPTION PI N NO. DESCRIPTION

1. Red Video 9. +5V
2. Green Video 10. Logic Ground
3. Blue Video 11. RXD
4. TXD 12. DDC-Serial Data
5. Detector Pin 13. H-Sync
6. R-Ground 14. V-Sync
7. G-Ground 15. DDC-Serial Clock
8. B-Ground

VGA Connector layout

1 5
6 10
11 15

4.2 Factory Preset Display Modes

VESA MODES
Horizontal Vertical
Nominal
Sync Nominal Sync Nominal
Mode Resolution Total Frequency
Polarity Freq.+/- 1Hz Polarity Pixel Clock (MHz)
+/- 0.5kHz
640x480@60Hz 800 x 525 31.469 N 59.940 N 25.175
640x480@75Hz 840 x 500 37.500 N 75.00 N 31.500
VGA
800x600@60Hz 1056 x 628 37.879 P 60.317 P 40.000
800x600@75Hz 1056x625 46.875 P 75.000 P 49.500
1024x768@60Hz 1344x806 48.363 N 60.004 N 65.000
XGA
1024x768@75Hz 1312x800 60.023 P 75.029 P 78.750
1152x864@75Hz 1600x900 67.500 P 75.000 P 108.00
SXGA 1280x1024@60Hz 1688x1066 64.000 P 60.000 P 108.00
1280x1024@75Hz 1688x1066 79.976 P 75.025 P 135.00
IBM MODES
Nominal Sync Nominal
Sync Nominal Pixel
Mode Resolution Total Frequency Polarit Freq. +/- 1
Polarity Clock (MHz)
+/- 0.5kHz y Hz
DOS 720x400@70Hz 900 x 449 31.469 N 70.087 P 28.322

13
 Dell E176FPc
4.3 Power Supply Requirements

A/C Line voltage range 100 V ~ 240 V± 10 %

A/C Line frequency range 50 ± 3Hz, 60 ± 3Hz

Input Voltage transients 280 volts AC for 10 sec @40℃

Current 0.6A max. at 100V, 0.35A max. at 240 V

< 60A peak at 240 VAC and cold starting

Peak surge current
< 30A peak at 120VAC and cold starting

Leakage current < 3.5mA

No advance effects (no loss of information or defect)

Power line surge
with a maximum of 1 half-wave missing per second

14
 Dell E176FPc
4.4 Panel Specification

Display Characteristics (For LM170E01-TLB3 panel)

Display Characteristics (For LM170E01-TLB4 panel)

Display Characteristics (For CLAA170EA07 panel)

15
 Dell E176FPc
4.4.2 Optical Characteristics (For LM170E01- TLB3/TLB4 panel)

16
 Dell E176FPc
Optical Characteristics (For CLAA170EA07 panel)

17
5. Block Diagram
5.1 Monitor Exploded View

18
5.2 Software Flow Chart

Y
2 3

N
5

N
7 8
Y

N
10 11

N N
12 13

Y Y

N
14 15 16

17

N
18 19

19
 Dell E176FPc

1) MCU Initializes.

2) Is the EEprom blank?

3) Program the EEprom by default values.

4) Get the PWM value of brightness from EEprom.

5) Is the power key pressed?

6) Clear all global flags.

7) Are the AUTO and SELECT keys pressed?

8) Enter factory mode.

9) Save the power key status into EEprom.

Turn on the LED and set it to green color. Scalar
initializes.
10) In standby mode?

11) Update the lifetime of back light.

12) Check the analog port, are there any signals coming?

13) Does the scalar send out an interrupt request?

14) Wake up the scalar.

15) Are there any signals coming from analog port?

16) Display "No connection Check Signal Cable" message. And go into standby mode after the message
disappears.
17) Program the scalar to be able to show the coming mode.

18) Process the OSD display.

19) Read the keyboard. Is the power key pressed?

20
 Dell E176FPc
5.3 Electrical Block Diagram
5.3.1 Main Board

LCD Interface
(CN101)

Flash Memory
SST25VF020-20- 4C-SAE Scalar GM2621

(U402) (Include MCU, ADC, OSD)

(U401)

R
RXD H
EPR_SDA G DB15_SDA,
TXD V
EPR_SCL B DB15_SCL

OSD Control Interface EEPROM D-Sub

EEPROM (U404)
(CN403) M24C16-MN6T Connector
M24C02WMN6
(U403) (CN405)

21
 Dell E176FPc
5.3.2 Inverter/Power Board

22
 Dell E176FPc
6. Mechanical Instruction
Tools: 2 Power screwdrivers (φ=5mm,L=60mm); 1 small cross screwdriver; turnbuckle driver;
Setting: Power screwdriver torque A=11 kgF. Cm; torque B=6 kgF. Cm
Note: Firstly, put the monitor on a soft, flat and clean surface, wear gloves.

Fig Remark

Remove stand:
Press the Stand release button
and lift up the Stand and away
from the monitor.

Remove bezel:
1. Remove the 4 screws by
torque A

2. Pry the monitor up then find

out the hooks’ position, use
the tool (like the picture or
other card) to insert into the
gap of bezel and rear cover.

23
 Dell E176FPc

3. Take off the bezel

Remove rear cover :

Turn over the monitor as the Fig,
hold the rear cover, and then
slightly remove it.

Black tape Remove the two screws by

Torque B
Install:
Fix the keyboard cable by black
tape as the figure showed.

24
 Dell E176FPc

Remove the shield :

1. Remove the screw by Torque
B or by manual and remove the
shield ,then remove the back
light connector

Remove the connector

Remove the two screws by

manual or torque = 3kgF.Cm and
remove the main frame

Remove the main frame and at

the same time disconnect the
LVDS connector and remove the
EVA washers

25
 Dell E176FPc

EVA washers
Install:
Fix the LVDS connector by black
tape and EVA washers.
Note: Make LVDS connector’s
LVDS Cable metal side adown for HYDIS
Black tape
AND LG panel and upturned for
AU panel.

Remove the nine screws by

Torque B and remove the power
board and main board.
Note: Magnetism ring should be
laid underneath the power board

Magnetism ring

Install:
Fix the LVDS cable by black tape
as the figure.

26
 Dell E176FPc

Screw pillar

Screw AC ground line as the

ground
figure and should be laid at the
left of screw pillar.
Note: The green line can’t be
pressed under the power board.

Note: The pins can’t gore the

blue and purple lines.

Affix black tapes for AU

The end
and SAMSUNG panel
The angle between CCFL line
and vertical direction should be
45 degree.

Affix 50mm black

tapes for
SAMSUNG panel
27
 Dell E176FPc
7. Schematic Diagram
7.1 Main Board
+5V +5V +5V

C448
C447 NC
NC C439
0.1uF/16V

2
SPI_3V3 GND GND GND
D402
NC 1
VGA_5V +3.3V_VDD D403 D404 D405
3 SPI_3V3 BAV99 BAV99 BAV99
FB410 (10 mil, ┰キ《絬)

3
2 VGA_5V
0.047uF

1
1 2 R434 C432
RED+ (3)
60 OHM 75　 1/16W
0.047uF
D407 Pins 6/7/8 are R/G/B R441 C436
RED- (3)
return lines resp. 100　 1/16W
BAT54C FB411
0.047uF
CN405 1 2 R435 C433
(3) GREEN+(3)
R450 60 OHM 75　 1/16W

17
3

DDC_SDA_VGA 0.047uF
DB15 R442 C437
GREEN- (3)
R452 11 1 Rin 100　 1/16W
4.7K　 1/16W

C444 6 FB412
0.1uF/16V DDC_SDA_A R453 12 2 Gin
4.7K　 1/16W
4.7K　 1/16W

0.047uF
R451 220　 1/16W 7 1 2 R436 C434
BLUE+ (3)
HS_in 13 3 Bin 60 OHM 75　 1/16W
0.047uF
GND 8 R443 C438
BLUE- (3)
VS_IN 14 4 100　 1/16W
9 R439 R440

75　 1/16W

75　 1/16W
R454 15 5 R438 75-ohm terminating resistor
U404 220　 1/16W 10 75　 1/16W
1 8
very close to the VGA
2 A0 VCC 7 conn.
A1 WP

16
3 6
4 A2 SCL 5 +3.3V_VDD
GND SDA
M24C02WMN6 R445 GND
GND GND 220　 1/16W
D412 D411
DDC_SCL_VGA D406 D410 R444
LL5232B 5.6V 5%

LL5232B 5.6V 5%

(3) LL5232B 5.6V 5% LL5232B 5.6V 5%

10K　 1/16W

VGA_PLUG
CABLE_DET (3)
GND GND
GND R446 220　 1/16W
VS (3)
R447 220　 1/16W (8 mil)
HS (3)
R455

220　 1/16W D409 R448 R449

D408 2.2K　 1/16W 2.2K　 1/16W C442 C443
LL5232B 5.6V 5% NC NC
EDID_WP LL5232B 5.6V 5%
(3) EDID_WP

GND
Title
Input Connectors
Size Document Number Rev
A D
Date: Wednesday, June 29, 2005 Sheet 2 of 6

28
 Dell E176FPc
3.3V_PVDD

3.3V_AVDD 3.3V_LAVDD 3.3V_DVDD 1.8V_DVDD 1.8V_AVDD

+3.3V_VDD
3.3V_DVDD +1.8V_VDD

110

101

128

116

118

104

106
1.8V_AVDD

92

82
74

25
47

53
91

87
55
17

86
78
70
2
AVDD_RPLL_33

AVDD_BIAS_33

VDD_RPLL_18
RVDD_33
RVDD_33

CVDD_18
CVDD_18
CVDD_18
CVDD_18
VDD_OUT_33
VDD_OUT_33
VDD_OUT_33

LBADC_VDD_33
AVDD_ADC_33
AVDD_ADC_33

AVDD_DVI_33
AVDD_DVI_33

AVDD_DVI_18
AVDD_DVI_18
AVDD_DVI_18

AVDD_ADC_18
FB401 C402 C403 C404 C405 C406 C407 FB404 C410 C411 C412 C413 C414
120OHM C401 + 120OHM + C409
0.1uF/16V 0.1uF/16V 0.1uF/16V 0.1uF/16V 0.1uF/16V 0.1uF/16V 22uF/16V 0.1uF/16V 0.1uF/16V 0.1uF/16V 0.1uF/16V 0.1uF/16V
22uF/16V

Close to respective power Pins Close to respective power Pins GPIO_8

120 NVRAM_SCL
GND 3.3V_PVDD GND 121 NVRAM_SDA
GPIO_9 122 /WP
3.3V_AVDD GPIO_10 123
GPIO_11 POWER_ON (4)
1.8V_DVDD 124 R430 ROM_WP#
GPIO_12 125 NC
GPIO_13 LED_O (4)
126
GPIO_14 LED_G (4)
FB402 C417 C418 C445 C446 FB406 C424 FB405 C419 + C420 C421 C422 C423
120OHM C416 + 120OHM 120OHM
0.1uF/16V 0.1uF/16V 0.1uF/16V 0.1uF/16V 0.1uF/16V 22uF/16V 0.1uF/16V 0.1uF/16V 0.1uF/16V 0.1uF/16V
22uF/16V

GND 3.3V_LAVDDClose to respective power Pins GND GND C427 33pF

3
3.3V_PVDD RESERVED 4
RESERVED 5
X401 108 RESERVED 6
FB403 XTAL RESERVED 7 LVDS_E8
120OHM + C426 14.318MHz 109 E_CH3_N 8 LVDS_E9
3.3V_PVDD TCLK E_CH3_P
C425
22uF/16V 0.1uF/16V 11 LVDS_E4
+5V C428 33pF E_CH2_N 12 LVDS_E5
99 E_CH2_P 13 LVDS_E2
(2) RED+ RED+ E_CH1_N
100 14 LVDS_E3
(2) RED- RED- E_CH1_P LVDS_E0
+5V R433 96 15
(2) GREEN+ GREEN+ E_CH0_N LVDS_E1
GND NC 97 16
HOLD# (2) GREEN- GREEN- E_CH0_P
93
(2) BLUE+ BLUE+ LVDS_E6
R421 94 9
(2) BLUE- BLUE- E_CLK_N
5.6K　 1/16W LVDS_E7

R431 NC
C440 R437 10
NC E_CLK_P LVDS_E[0..9]
U405 ROM_WP# LVDS_E[0..9] (5)
NC 89 19
(2) HS HSYNC RESERVED
OPTIONAL VCC
3
(2) VS
90
VSYNC RESERVED
20

3
R428 R456 21
FOR 2 GND NC 1 Q402 NC RESETn 111 RESERVED 22
DEBUGGING RSTN RESETn RESERVED 23
1 C429 NC SPI_3V3 +3.3V_VDD RESERVED 24
PURPOSES GND R419 RESERVED
ONLY NC NC 2 R418 0　 1/16W
+5V 3 NC 63 27
R422 RESERVED RESERVED 28
CN402 GND 10K　 1/16W RESERVED 29
GND C441 64 RESERVED 30
1 (2) DDC_SCL_VGA DDC_SCL_VGA RESERVED LVDS_O8
UDART_DO 0.1uF/16V 65 31
2 (2) DDC_SDA_VGA DDC_SDA_VGA O_CH3_N LVDS_O9 LVDS_O[0..9]
UDART_DI 1 2 32
3 O_CH3_P LVDS_O[0..9] (5)
R400 NC 66
4 GND R401 NC 67 DDC_SCL_DVI 35 LVDS_O4
GND DDC_SDA_DVI O_CH2_N 36 LVDS_O5
GND O_CH2_P 37 LVDS_O2
72 O_CH1_N 38 LVDS_O3
73 RX2+ O_CH1_P 39 LVDS_O0
RX2- O_CH0_N
G-PROBE
U401
75 40 LVDS_O1
76 RX1+ O_CH0_P
RX1-
gm2621
80 33 LVDS_O6
81 RX0+ O_CLK_N 34 LVDS_O7
83 RX0- MQFP-128 O_CLK_P
84 RXC+ 41 R476
RXC- O_BON +3.3V_VDD
3.3V_DVDD 3.3V_AVDD 42 NC
+3.3V_VDD RESERVED 43

4.7K　 1/16W
R402 249　 1/16W 69 RESERVED 44 R477
C431 R406 R407 R408 REXT RESERVED 45
C430 RESERVED 46
RESERVED
4.7K　 1/16W

4.7K　 1/16W

4.7K　 1/16W

NC R403

NC R404
0.1uF/16V 0.1uF/16V 52

4.7K　 1/16W
CRVSS

R425
127 PPWR GND
U403 PPWR PBIAS PPWR (6)
GND GND 49
PBIAS PBIAS (6)
1 8
2 A0 VCC 7 R409 100　 1/16W /WP 119
3 A1 WC 6 R410 100　 1/16W NVRAM_SCL PWM1 / GPO_5
4 A2 SCL 5 R411 100　 1/16W NVRAM_SDA 50
VSS SDA (6) BRIGHTNESS PWM0 / GP0_4

M24C16-MN6T UDART_DO 58
R424 GPO_3
GND 4.7K　 1/16W UDART_DI 57 105
GPO_2 VBUFC_RPLL
56
GPO_1
+3.3V_VDD EDID_WP 51
(2) EDID_WP GPO_0
GND
Boot-Strap Configuration: 59
SPI_CSn
Name 10 KOhm Open Default R426 R427 R417 R416
4.7K　 1/16W

4.7K　 1/16W
R432 R423
4.7K　 1/16W 4.7K　 1/16W
4.7K　 1/16W

ATMEL_EN ATMELSPI ROM Standard SPI ROM Open +3.3V_VDD 4.7K　 1/16W
LBADC_IN1
115
LBADC1 (4)
(PWM0) U402 LBADC_IN2
114
LBADC2 (4)
R429 113
LBADC_IN3 CABLE_DET (2)
1 8 GND 10K　 1/16W 112
CE# VDD LBADC_VSS
UART_PIN_SEL UART on GPO UART on DDC Open 2
SO HOLD#
7 HOLD# 60
SPI_CLK
(PWM1) ROM_WP# 3
WP# SCK
6 ROM_SCLK GND 61
SPI_DI
4 5 ROM_SDI 62 GND

AVSS_BIAS
AVSS_ADC
102 AVSS_ADC
AVSS_ADC

AVSS_ADC
VSS SI SPI_DO

VSS_RPLL
AVSS_DVI
AVSS_DVI
AVSS_DVI
AVSS_DVI

103 AVSS_DVI
VSS_OUT
VSS_OUT
V_EDID_ATMEL ATMELSPI ROM Standard SPI ROM Open

CRVSS
CRVSS
117 CRVSS
CRVSS
SST25VF020-20-4C-SAE
(SPI_CSn) GND C435
0.1uF/16V

GPO_0 Ext. ROM JTAG Off

107
68
71
77
79

95
98

26
48

85

18
54
88
GND

1
Title
gm2621
GND
Size Document Number Rev
Custom D
Date: Wednesday, June 29, 2005 Sheet 3 of 6

29
 Dell E176FPc
+3.3V_VDD +3.3V_VDD

R457 R458

100　 1/16W CN403 100　 1/16W

CONN

R459 47K　 1/16W R460

LED_G Q401 Q403 47K　 1/16W LED_O
(3) LED_G LED_O (3)
PMBS3904 PMBS3904

8
7
6
5
4
3
2
1
LED_GREEN LED_ORANGE
KEY_AUTO R461 220　 1/16W R462 220　 1/16W KEY_MENU
KEY_RIGHT R463 220　 1/16W R464 220　 1/16W KEY_LEFT
KEY_ONOFF R465 220　 1/16W

C454 C455 GND

0.1uF/16V 0.1uF/16V C456 C457
0.1uF/16V 0.1uF/16V

GND GND GND GND

+3.3V_VDD +3.3V_VDD

R466 R467
R468 C458
10K　 1/16W 10K　 1/16W 10K　 1/16W
0.1uF/16V

GND

R469 30K　 1/16W KEY_MENU

(3) LBADC1 R470 22K　 1/16W KEY_RIGHT

R472 30K　 1/16W KEY_LEFT

(3) LBADC2 R471 22K　 1/16W KEY_AUTO

R474 4.7K　 1/16W KEY_ONOFF

(3) POWER_ON

Title
KEYPAD
Size Document Number Rev
A D
Date: Wednesday, June 29, 2005 Sheet 4 of 6

30
 Dell E176FPc

(3) LVDS_O[0..9] CN101

LVDS_O0 LVDS_O0 RXO0- 2 1 RXO0+ LVDS_O1

LVDS_O1 LVDS_O2 RXO1- 4 3 RXO1+ LVDS_O3
LVDS_O2 LVDS_O4 RXO2- 6 5 RXO2+ LVDS_O5 CN102
LVDS_O3 LVDS_O6 RXOC- 8 7 RXOC+ LVDS_O7 RXO0+ LVDS_O1
LVDS_O4 LVDS_O8 RXO3- 10 9 RXO3+ LVDS_O9 RXO0- LVDS_O0 30
LVDS_O5 LVDS_E0 RXE0- 12 11 RXE0+ LVDS_E1 RXO1+ LVDS_O3 29
LVDS_O6 LVDS_E2 RXE1- 14 13 RXE1+ LVDS_E3 RXO1- LVDS_O2 28
LVDS_O7 LVDS_E4 RXE2- 16 15 RXE2+ LVDS_E5 RXO2+ LVDS_O5 27
LVDS_O8 LVDS_E6 RXEC- 18 17 RXEC+ LVDS_E7 RXO2- LVDS_O4 26
LVDS_O9 LVDS_E8 RXE3- 20 19 RXE3+ LVDS_E9 25
22 21 RXOC+ LVDS_O7 24
24 23 RXOC- LVDS_O6 23
RXO3+ LVDS_O9 22
RXO3- LVDS_O8 21
(3) LVDS_E[0..9] RXE0+ LVDS_E1 20
CONN RXE0- LVDS_E0 19
LVDS_E0 18
LVDS_E1 RXE1+ LVDS_E3 17
LVDS_E2 +VLCD RXE1- LVDS_E2 16
LVDS_E3 15
LVDS_E4 RXE2+ LVDS_E5 14
LVDS_E5 RXE2- LVDS_E4 13
LVDS_E6 RXEC+ LVDS_E7 12
LVDS_E7 RXEC- LVDS_E6 11

15.4mA
LVDS_E8 GND GND RXE3+ LVDS_E9 10
LVDS_E9 RXE3- LVDS_E8 9
8
+ R101 C102 7
C101 6
+VLCD
22uF/16V 0.1uF/16V 5
4.7K　 1/16W 4
3
2
1

CON30/NC
GND
GND

Title
PANEL INTERFACE
Size Document Number Rev
A D
Date: Wednesday, June 29, 2005 Sheet 5 of 6

31
 Dell E176FPc
+12V

+5V

CN701
GND ON_OFF R705 4.7K　 1/16W
GND 1 2 DIM PBIAS (3)
D704 +3.3V_VDD
VCC12V 3 4 VCC12V +5V FB701
GND 5 6 GND NC SR24
VCC5V 7 8 VCC5V U701 AIC1084-33PM
GND 9 10 GND
11 12 3 2
CON402(PITCH 2.00) VIN VOUT

ADJ
C707 C706 C708 C702

100uF/16V

100uF/16V
+5V C703

0.1uF/16V

0.1uF/16V
+ C701 + +
C704
GND 22uF/16V 0.1uF/16V 0.1uF/16V

1
R708
1K　 1/16W GND GND GND GND GND
R710
GND

1K　 1/16W
R707
Q703 C711 +
(3) BRIGHTNESS
PMBS3904 FB702
1K　 1/16W 22uF/16V 120OHM

+5V +1.8V_VDD
GND GND

+5V +VLCD D701 D702

NC NC U702
3 2
VI VO
R714 +5V +3.3V_VDD C709 C713

GND

100uF/16V
3 C712

0.1uF/16V
+ +
47K　 1/16W C710
R723 Q704 22uF/16V

0.1uF/16V
R721 R722

1
1 AO3401L 0　 1/16W NC
R725 47K　 1/16W C715 2
Q706 GND GND GND GND GND
(3) PPWR
PMBS3904 0.1uF/16V
47K　 1/16W C718

0.1uF/16V
C717 +

22uF/16V

Title
GND GND
POWER
Size Document Number Rev
A D
Date: Wednesday, June 29, 2005 Sheet 6 of 6

32
 Dell E176FPc
7.2 Power Board
R921 C921
47　 1/2W 0.001uF/500V

4
DB901

+
KBP206G

2 3 D921

3
FMB29L

T901 2 L903 L F902

-

0　 1/8W
4
O +12V
10
1

2
R908 + C923 + C931 + C925

1
R903 R906 C905 100K　 2W 9 1000uF/25V 1000uF/25V 470uF/25V ZD903
5.1K　 1/8W NC 0.0015uF/2KV R922 C922 PTZ7.5B
+ C904 47　 1/2W 0.001uF/500V
2 3 100uF/450V O8
L902 D901

1
L R904 R907 FR107 L904 L
5.1K　 1/8W NC

3
1 4 D902 6 12
+5V
C902 UF4003
0.001uF/250V 2 11 2 + C924 + C926
1000uF/16V 470uF/16V R926 R927 C928
C907 + C906 R909 3 D922 NC NC 0.1uF
0.1uF R905 10uF 68　 1/10W 7 FMB26L
C901 5.1K　 1/8W 1O

1
0.001uF/250V R920
NC
3 4 R915
L901 R910 22　 1/10W Q901
4.7K　 1/10W STP9NK60ZFP
L IC901

6
2 1 NCP1203DR
R917
1 5 10K　 1/10W
NCP1203DR60 R916
220　 1/10W
C900
R911 7 3 0.001uF/250V
20K　 1/10W R923

2
4

2
C903 0.47uF/250V 560　 1/4W
R918 ZD904 ZD905
0.39　 2W RLZ13B RLZ5.1B

R901 220K　 1/8W

C932

1
C912 C911 R929 R930 0.47uF/25V
0.001uF 470pF/50V 33K　 1/10W 3.6K　 1/10W
1

R902 R900 D923 D924

220K　 1/8W 220K　 1/8W NR901 LL4148-GS08 LL4148-GS08
NTCR CN902

1
4 R924 CONN
t ZD902
RLZ5.1B 3
IC902
PC123FY2 4P
1K　 1/10W
1
ON/OFF
2

2
2

DIM
ZD901 3

2
+12V
RLZ15B 4

1
VAR901 varistor R914 5
+5V
4.7K　 1/10W D903 C929 6
Q902 LL4148-GS08 0.1uF R931 7
1

2PA733P 1K　 1/10W 8

R912
F901 100　 1/10W R925 C927
FUSE IC903 0　 1/8W R932 0.1uF
Q903 AZ431AZ-AE1 1K　 1/10W
2PC945P

R913 + C908 R919

C933 75K　 1/10W 22uF 16K　 1/10W R933
0.001uF/250V C930 2.4K　 1/10W
NC
1
2
3

CN901
CONN

AOC (Top Victory) Electronics Co., Ltd.

Title
1.POWER OUTPUT 12V & 5 V
Size Document Number Rev
B
PWPC1742SEI1 (715L1492-E) A

Date: Wednesday, March 09, 2005 Sheet 1 of 2

33
 Dell E176FPc
L201 TP1 TP2
3 2 HVO HVO
+12V
Q202 Q203 120UH R221 R222 R223 R224 CN201
C201 DTA144WKA R201 IRF5305S 2.4K　 1/4W2.4K　 1/4W2.4K　 1/4W2.4K　 1/4W CONN

2
0.1uF/25V + C203 C204 2.4K　 1/10W PT201
0.1uF/25V ZD201 1 11 1

1
Q201 C202 470uF/25V R202 RLZ11B O O 2
DTC144WKA 0.1uF/25V 220　 1/10W

C213

1
C205 1uF/25V D201 R205 12pF/3KV
R214 RB050L-40 12K　 1/10W
ON/OFF
12K　 1/10W

R211 Q204 C221 8

NC R213 0.33uF/250V 9 C214 CN202
R210 4.7K　 1/10W PMBS3904 O 12pF/3KV CONN
47K　 1/10W C209 R203 R206
33uF/16V 2.4K　 1/10W 12K　 1/10W 6 12 1
Q205 2
PMBS3906 POWER X'FMR

+
DIM
R212 Q206 Q207 TP3 TP4
62K　 1/10W C210 R204 2SC5706-PM-E 2SC5706-PM-E HVO HVL
1uF/25V 470　 1/10W
CN203
C208 CONN
0.1uF/25V PT202
1 11 1

1
O O 2

R232 D210 R229 D203 C211

16

15

14

13

12

11

10

9
IC201 51K　 1/10W LL4148-GS08 750　 1/10W 1N4148 12pF/3KV
NON2
SCP

OUT2
VREF

FB2
INV2

VCC
DT2
TL1451ACNSR

D202 R225 8
R231 C223 R230 1N4148 1K　 1/4W 9 C212 CN204
C222 12K　 1/10W 1uF/25V 470　 1/10W O 12pF/3KV CONN
0.47uF/25V
6 12 1
NON1

OUT1

2
GND
INV1

DT1
FB1
CV

POWER X'FMR
RT

C206
NC C207
330pF
1

D205
1N4148 D204 R226
R207 1N4148 1K　 1/4W
10K　 1/10W

R208 0　 1/10W D209

1N4148

R209 0　 1/10W
D207
1N4148 D206 R227 D208 R228
1N4148 1K　 1/4W 1N4148 1K　 1/4W

is power GND
AOC (Top Victory) Electronics Co., Ltd.
Title

2. FOR 17" 4 LAMPS INVERTER is signal GND

Size Document Number Rev
PWPC1742SEI1(715L1492-E) A

Date: Wednesday, March 09, 2005 Sheet 2 of 2

 
 

34
 Dell E176FPc
8. PCB Layout
8.1 Main Board

36
 Dell E176FPc

37
 Dell E176FPc
8.2 Inverter/Power Board

38
 Dell E176FPc

39
 Dell E176FPc

8.3 Key Board

40
 Dell E176FPc
9. Maintainability
9.1 Equipments and Tools Requirement
1. Voltage meter
2. Oscilloscope
3. Pattern Generator
4. LCD Color Analyzer
5. Service Manual
6. User Manual

41
 Dell E176FPc
9.2 Trouble shooting
9.2.1 Main Board
No display

Check main board Power; is there DC level

NG
Measured CN701 pin5/6 = 12 V? output? Check U701 pin 2= 3.3V? U702
Measured CN701 pin 9/10= 5V? pin 2= 1.8V? Is there any shortage or cold
solder?

OK

Disconnected the Signal cable (Loose the Green

OK Connected the Signal cable again,
Signal cable), Is the screen show Block
check LED status.
WRGB color bars?

NG
Orange Check Power switch is in Power-on
Replace U401
Connected the Signal status, and check if Power switch had
Scalar IC
cable again Check LED been stuck?
status.
OK, Keyboard no stuck
Green Orange

Measured RGB (R434, R435, Check

Check the Wire-Harness from CN101 Correspondent
R436,) H/V Input at U401 pin component
short/open
89,90, Was there have signal?
(Protection Diode)
OK, Wire tight enough

Check Panel-Power Circuit Block NG

OK, Panel Power OK OK

Measured Crystal X401

Check U401 Data-output Block

OK, U401 data OK OK

Replace Inverter board and Check Replace U401 (GM2621)

Inverter control relative circuit

OK
Re-do White balance adjust

Note: 1. If replace “Main-Board”, Please re-do “DDC-content” programmed & “White-Balance”.

2. If replace “Power Board” only, Please re-do “ White-Balance”.

42
 Dell E176FPc
Panel Power Circuit

Check the PPWR panel power relative circuit,

Check C101 should have response from NG Q704, Q706; in normal operation, When LED
0V to 5V when we switch the power =green, V-R725 should =5V,If PPWR
switch from off to on no-response when the power switch turn on and
turn off,

OK

NG
Check CN101, if it is not soldered well Change CN101

OK

Change panel

Inverter Control Relative Circuit

Check the BKlt-On relative circuit, R705; in

NG
Measured the inverter connector CN402 normal operation, when LED=green, R705
Pin2 on/off control=3.3V (on) BKlt-On should=3.3V, If BKlt-On no-response
Pin4 PWM signal control dim 0V-5V when the power switch turn on-off, Replace
U401

NG, still no screen

NG
Replace Inverter board to new-one Check NO SCREEN APPEAR block
And check the screen is normal?

OK

43
 Dell E176FPc
U401-data Output

Check GM2621 (U401) NG

Replace GM2621 (U401) or
Signal output (PIN 7 -16, PIN 31 - 40)
replace Main board.
Is the waveform ok?

OK

If Main Board being replaced, please

Replace panel
do the DDC – content reprogrammed,
and do the white balance adjustment

44
 Dell E176FPc
9.2.2 Inverter/Power Board
No Power

Check to CN701 Pin2=12V

NG
Check Interface board
OK

Check AC line volt 110V or 220V

NG
Check AC line
OK

Check the voltage of C904(+)

NG
OK Check F901, bridge rectified circuit

Check start voltage for the pin8 of IC901

NG
OK Check R903, R904, IC901

Check the auxiliary voltage is between 10V-16V

NG 1) Check IC902, IC903

OK
2) Check Q902, Q903 OVP circuit

Check D921, D922

45
 Dell E176FPc
No Backlight

Check C201 (+) =12V

OK NG
Check F902

Check ON/OFF signal

NG
OK Check Interface board

Check IC201 pin9=12V ?

NG
OK Change Q201 or Q202

Check the pin1 of IC201 have saw tooth wave

OK NG
Change IC201

Check D201 (-) have the output of square wave at short time.

OK NG
Check Q203/Q204/Q205/D201

Check the resonant wave of pin1 & pin6 for PT201

NG
OK
Check Q206/Q207/C221

Check the output of PT201

NG
OK Change PT201

Check connecter & lamp

46
 Dell E176FPc
9.2.3 Key Board

OSD is unstable or not working

NG
Is Keypad board connecting normally? Connect Keypad Board

OK

NG
Is Button Switch normally? Replace Button Switch

OK
NG
Is Keypad board normally? Replace Keypad Board

OK

Check main board

47
 Dell E176FPc
10. White balance, Luminance adjustment
Approximately 2 Hours should be allowed for warm up before proceeding White-Balance
adjustment.
Before started adjust white balance, please setting the Chroma-7120 MEM. Channel 3 to 65000K colors, MEM.
Channel 4 to 93000K colors, MEM. Channel 9 to 57000K (our 9300 parameter is x=283±28, y=297±28, Y = 175
±20 cd/m2, 6500 parameter is x =313±28, y=329±28, Y = 180 ±20 cd/m2, and 5700 parameter is x = 328 ±28, y =
344 ±28, Y = 180 ±20 cd/m2)
How to setting MEM.channel you can reference to chroma 7120 user guide or simple use “ SC” key and “ NEXT”
key to modify xyY value and use “ID” key to modify the TEXT description Following is the procedure to do
white-balance adjust
Press MENU and AUTO-ADJUST button during press Power button will activate the factory mode,

Gain adjustment:

Move cursor to “-Factory Setting-” and press MENU key to enter this sub-menu.

Move cursor to “ Factory” and press MENU key.

Move cursor to “ Auto Level” and press MENU key to adjust Gain and Offset automatically;
a. Adjust sRGB (65000K) color-temperature
1. Switch the chroma-7120 to RGB-mode (with press “MODE” button)

2. Switch the MEM.channel to Channel 3 (with up or down arrow on chroma 7120)

3.The LCD-indicator on chroma 7120 will show x = 313 ±28, y = 329 ±28, Y = 180 ±20 cd/m2

4. Adjust the RED on OSD window until chroma 7120 indicator reached the value R=100

5. Adjust the GREEN on OSD, until chroma 7120 indicator reached G=100

6. Adjust the BLUE on OSD, until chroma 7120 indicator reached B=100
7. Repeat above procedure (item 5,6,7) until chroma 7120 RGB value meet the tolerance =100±2

b. Adjust Color1 (93000K) color-temperature

8. Switch the chroma-7120 to RGB-mode (with press “MODE” button)

9. Switch the MEM.channel to Channel 4 (with up or down arrow on chroma 7120)

10. The LCD-indicator on chroma 7120 will show x = 283 ±28, y = 297 ±28, Y = 175 ±20 cd/m2
11. Adjust the RED on OSD window until chroma 7120 indicator reached the value R=100
12. Adjust the GREEN on OSD, until chroma 7120 indicator reached G=100
13. Adjust the BLUE on OSD, until chroma 7120 indicator reached B=100
14. Repeat above procedure (item 5,6,7) until chroma 7120 RGB value meet the tolerance =100±2

c. Adjust Color2 (57000K) color-temperature

15. Switch the chroma-7120 to RGB-mode (with press “MODE” button)

16. Switch the MEM.channel to Channel 9 (with up or down arrow on chroma 7120)

17. The LCD-indicator on chroma 7120 will show x = 328 ±28, y = 344 ±28, Y = 180 ±20 cd/m2

18. Adjust the RED on OSD window until chroma 7120 indicator reached the value R=100

19. Adjust the GREEN on OSD, until chroma 7120 indicator reached G=100

20. Adjust the BLUE on OSD, until chroma 7120 indicator reached B=100
48
 Dell E176FPc
21. Repeat above procedure (item 5,6,7) until chroma 7120 RGB value meet the tolerance =100±2
22. Move cursor to “ Exit/Save” sub-menu and press MENU key to save adjust value and exit.
Turn the POWER-button off to on to quit from factory mode.

Max Brightness measurement:

a. Switch to the full white pattern, in user mode main menu:
1. Set <Color Settings> Red, Green, and Blue to the max.
2. Set <Brightness> Brightness, Contrast to the max.
b. The Minimum brightness is 200cd/m2 ±20.

11. EDID Content

00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15

0: 00 FF FF FF FF FF FF 00 10 AC 14 A0 30 39 37 38

16: 0D 0F 01 03 68 22 1B 78 EE CA F6 A3 57 47 9E 23

32: 11 4F 54 A5 4B 00 71 4F 81 80 01 01 01 01 01 01

48: 01 01 01 01 01 01 30 2A 00 98 51 00 2A 40 30 70

64: 13 00 52 0E 11 00 00 1E 00 00 00 FF 00 39 30 31

80: 32 33 35 34 36 38 37 39 30 0A 00 00 00 FC 00 44

96: 45 4C 4C 20 45 31 37 36 46 50 0A 20 00 00 00 FD

112: 00 38 4B 1F 50 0E 00 0A 20 20 20 20 20 20 00 4B

Note: Byte 0C, 0D, 0E, 0F means Serial No. Byte 10, 11 means manufacture time. Byte
7F means checksum

49
 Dell E176FPc
12. ISP (In System Program) User Manual
12.1 Connect ISP Writer preparation action
Connect RXD and TXD of PC to RXD (P3.0) and TXD (P3.1) of CPU through RS-232.

a. There are two ways to entering Reboot Mode. The settings for Reboot Mode is as follow
z Both P2.6 P2.7 are LOW and RESET pin is HIGHT.
z P4.3 is LOW and RESET pin is HIGHT.

50
 Dell E176FPc
12.2 To Use ISP WRITER (take E153FP for example)
Press the “–“ key at front bezel and plug the AC power cord in, then the MCU enter ISP mode;
a. You will enter the window as follow after executing the ispwriter.exe file.

51
 Dell E176FPc
b. Click the “Select Chip” button, and choose the type you’re going to program.

52
 Dell E176FPc
c. Click the “Select Bank0” button and selecting a file which a binary Format required.

53
 Dell E176FPc
d. Select the communication Setting: Port Name

e. Click the “ConNect” button.

54
 Dell E176FPc
f. Click “Program all” to start programming.

12.3. Executing ISP

a. “Program All” button that will execute erase and program and verify. Then you can get the window as follow,
and click “OK” to complete ISP process.

b. Complete the ISP process, click“exit LD”button to reset monitor.

55
 Dell E176FPc
13. Check List
1) After replacing LCD Main board and panel, Check if white-balance is within the specs, then
re-writing DDC is necessary.
The white-balance value for each common color temperature:
9300 parameter is x=283±28, y=297±28, Y = 180 ±10 cd/m2,
6500 parameter is x =313±28, y=329±28, Y = 180 ±10 cd/m2,
5700 parameter is x = 328 ±28, y = 344 ±28, Y = 180 ±10 cd/m2)
The color temperature value above must be up to the situation of x<y. The value of Y should be confirmed
according to different customers. 15” LCD is commonly 180±20cd/cm2（Center）and 17” LCD is required to be
larger than 200cd/cm2 (Center). The exact brightness values are confirmed by the checking-regulations of
different customers and different models.
2) Steps of white-balance adjustment for LCD:(Take 17” AOC LCD LM724 for example)
。
1. Required instruments: Chroma7120、Chroma2325（BGA265A）
2. First connect the instruments together and turn on the LCD power, then warm up for 30 minutes under full
white screen mode. First press the “Reset” key in the menu to recover factory set as following.

Set Chroma2325 at round-windows mode and make the detecting-head of Chroma7120 aim at the cross
in the middle, the distance between the detecting-head and the cross is 20cm.
3. Set Chroma2325（BGA265A）to be T144（1280*1024/60HZ）and P105 of full white screen. Test if the
white-balance value is within the specs. Please follow the steps below to adjust if it is beyond the specs.
4. Cut the power. Then press MENU key and re-plug power cable at the same time to enter into the factory
mode. See the following pictures.

Select ”F＂,then Select

AUTO LEVEL item.

5. Test white-balance again after Auto Level. Adjustment with hand is necessary if it is beyond the specs.
6. Select 7x00 item to adjust cool color-temperature and select 6x00 to adjust warm color- temperature. It can
reach to the best effect through adjusting R/G/B value if it inclines to green or blue.
56
 Dell E176FPc
7. Select Exit to the upper menu after completing the adjustment. Then press POWER OFF to exit and save it.
3) Steps for writing DDC：
1. Employ PC, and connect the DDC-writing instrument and the instrument that is ready for writing into DDC to
the power of 12V. Connect the signal cable of the latter to D-USB or DVI of DDC-writing instrument (The
data-writing of monitor needs transfer-interface) and link the DDC-writing instrument with PC through printer
interface. (See the schematic picture below)

(Connection for VGA) (Connection for DVI)

2. Seek the document with the expanded name of .BAT in DDC file of this model. It appears the indication of
“Input Serial No.：＂after dual-click the document to be ready for DDC-writing.

3. Input the serial number of the product (For instance: AOC LM725 is 13 bits), and then press ENTER to start

writing

4. Check the indication of DDC-writing program at the end. When you see the picture as the schematic picture

above, the“Data compare OK!” Means being written well and that’s the end. Please check if the

Manufacturer Name, Vendor Assigned Code, Monitor Name, Serial Number, Week of Manufacture, Year of

Manufacture are right. It will appear “Data compare error! ” To indicate failure if the DDC-writing doesn’t

perform well. Please check the power resource and the connection of the signal cable, then return to step 3

by pressing ENTER and re-do it.

5. You can exit the program by pressing Ctrl plus C, and then cut the signal cable and the power.

6. The following picture is taking AOC LM725 EDID for example.

57
 Dell E176FPc

Notes:
1. Make sure the system time of PC is in accordance with the real time before writing.
2. The schematic picture is just as an example for description; the exact content of the DDC is dependent on
the serial number of the BARCORD of this model.
3. Data DDC-writing needs a transfer interface.
Instruction：DDC-writing needs 4 files:
1. Barcode.txt (Supply Barcode length and flow number)
2. *.EXE (DDC-writing program)
3. WR.bat (Group order file for cycling utilization of *EXE, and dual-click this file when perform
DDC-writing)
4. W.dat (The content with 128 bits of DDC)

58
 Dell E176FPc
14. BOM List
Part NO Description Quantity Unit Remark
CONVERSION BOARD
CBPC780KCDDLP VER:A00,V6C08 1 PCS For CPT panel
CONVERSION BOARD
CBPC780KGDDLP VER:A00,V6C08 1 PCS For LPL panel
PWPC1742CPD2P POWER BOARD VER:A00 1 PCS For CPT panel
PWPC1742LGD2P POWER BOARD VER:A00 1 PCS For LPL panel
15G6261 1 BRACKET 2 PCS For CPT panel
15G6261 1 BRACKET 4 PCS For LPL panel
15G8187 1 MAIN FRAME-CPT/LPL 1 PCS For CPT/LPL panel
15G8187 4 MAIN FRAME 1 PCS For LPL panel
750GLC70A07 5Z D CPT 17" ZBD PANEL 1 PCS For CPT panel
750GLG70E1T31Z D LPL 17" TLB3 ZBD PANEL 1 PCS For LPL (TLB3) panel
750GLG70E1T41Z D LPL 17" TLB4 ZBD PANEL 1 PCS For LPL (TLB4) panel

Location Part NO Description

Q1G6019 1 SCREW
KEPC780KF2P KEY BOARD
11G6080 1 SPACER SUPPORT
15G8146 1 KEVSINGTON BRACKET
15G8185 1 HOLDER BRACKET R
15G8186 1 HOLDER BRACKET L
19G 588 1 SPRING HOLDER
19G 589 1 SPRING BUTTON
20G 027 2 STAND HOLDER
23G3178700 3A LOGO
26G 800700 6A S/N LABEL
33G4884ASN L BUTTON FUNC
33G4885 Y2 L BUTTON RELEASE
34G1611AY2 B BEZEL
34G1612 Y2 B REAR COVER
40G 17N700 1A ID LABEL
40G 58162435A LABEL
40G 581700 3A6813 CARTON LABEL
41G7800700 8A E176 DAO PIG
41G780070010A QSG
44G3586 3EPE EPE
44G3586BRO 2 PAPER BLOCK

59
 Dell E176FPc
44G3770 1 EPS(L)
44G3770 2 EPS(R)
44G3770700 2A CARTON
44G3770BRO 1 PAPER BLOCK
45G 88606 8 PE BAG FOR BASE
45G 88607DE8 PE BAG
52G 1186 SMALL TAPE
52G6020 2DE9 FILM PROTECT
52G6022 1500 SMALL TAPE
52G6025 11848 MYLAR FOR POWER BOARD
52G6025 11900 MYLAR FOR STAND HOLDER
52G6025 11905 MYLAR
52G6025 11923 MYLAR FOR SEFETY
70G1700700 2A CD MANUAL
85G 702 1 SHIELD WIRE
85G 703 1 SHIELD LAMP
89G402A18NISD POWER CORD
95G8018 30 80 LVDS HARNESS
M1G 130 4 47 SCREW
M1G 330 4128 SCREW M3X4
M1G1740 6128 SCREW
M1G2940 10225 SCREW
M1G3030 5125 SCREW
Q1G6019 1 SCREW
705G 780 87 D1 CN901 ASS'Y
89G 728LAA 2 SIGNAL CABLE
AIC780KCDDLP MAIN BOARD
40G 457624 1B LABEL-CPU
40G 45762412B CBPC LABEL
C101 67G309V220 3 22UF +-20% 16V
C401 67G309V220 3 22UF +-20% 16V
C409 67G309V220 3 22UF +-20% 16V
C416 67G309V220 3 22UF +-20% 16V
C419 67G309V220 3 22UF +-20% 16V
C425 67G309V220 3 22UF +-20% 16V
C701 67G309V220 3 22UF +-20% 16V
C710 67G309V220 3 22UF +-20% 16V
C711 67G309V220 3 22UF +-20% 16V
C717 67G309V220 3 22UF +-20% 16V

60
 Dell E176FPc
CN101 33G8043 24 H CONNECTER
CN403 33G8019 8C H CONNEETER
CN405 88G 35315F H D-SUB 15PIN
CN701 33G8027 12 WAFER 2*6P 2.0MM R/A
X401 93G 22 53 CRYSTAL 14.318MHzHC-49U
715G1565 1 MAIN BOARD PCB
C102 65G0603104 12 CER2 0603 X7R 16V 100N
C402 65G0603104 12 CER2 0603 X7R 16V 100N
C403 65G0603104 12 CER2 0603 X7R 16V 100N
C404 65G0603104 12 CER2 0603 X7R 16V 100N
C405 65G0603104 12 CER2 0603 X7R 16V 100N
C406 65G0603104 12 CER2 0603 X7R 16V 100N
C407 65G0603104 12 CER2 0603 X7R 16V 100N
C410 65G0603104 12 CER2 0603 X7R 16V 100N
C411 65G0603104 12 CER2 0603 X7R 16V 100N
C412 65G0603104 12 CER2 0603 X7R 16V 100N
C413 65G0603104 12 CER2 0603 X7R 16V 100N
C414 65G0603104 12 CER2 0603 X7R 16V 100N
C417 65G0603104 12 CER2 0603 X7R 16V 100N
C418 65G0603104 12 CER2 0603 X7R 16V 100N
C420 65G0603104 12 CER2 0603 X7R 16V 100N
C421 65G0603104 12 CER2 0603 X7R 16V 100N
C422 65G0603104 12 CER2 0603 X7R 16V 100N
C423 65G0603104 12 CER2 0603 X7R 16V 100N
C424 65G0603104 12 CER2 0603 X7R 16V 100N
C426 65G0603104 12 CER2 0603 X7R 16V 100N
C427 65G0603330 31 CER1 0603 NP0 50V 33P P
C428 65G0603330 31 CER1 0603 NP0 50V 33P P
C430 65G0603104 12 CER2 0603 X7R 16V 100N
C431 65G0603104 12 CER2 0603 X7R 16V 100N
C432 65G0603473 32 CHIP 0.047UF 50V X7R
C433 65G0603473 32 CHIP 0.047UF 50V X7R
C434 65G0603473 32 CHIP 0.047UF 50V X7R
C435 65G0603224 17 CAP:CER 0.22UF-20%-80%
C436 65G0603473 32 CHIP 0.047UF 50V X7R
C437 65G0603473 32 CHIP 0.047UF 50V X7R
C438 65G0603473 32 CHIP 0.047UF 50V X7R
C439 65G0603104 12 CER2 0603 X7R 16V 100N
C441 65G0603104 12 CER2 0603 X7R 16V 100N

61
 Dell E176FPc
C442 65G0603220 31 CER1 0603 NP0 50V 22P P
C443 65G0603220 31 CER1 0603 NP0 50V 22P P
C444 65G0603104 12 CER2 0603 X7R 16V 100N
C445 65G0603104 12 CER2 0603 X7R 16V 100N
C446 65G0603104 12 CER2 0603 X7R 16V 100N
C454 65G0603104 32 CHIP 0.1UF 50V X7R
C455 65G0603104 32 CHIP 0.1UF 50V X7R
C456 65G0603104 32 CHIP 0.1UF 50V X7R
C457 65G0603104 32 CHIP 0.1UF 50V X7R
C458 65G0603104 12 CER2 0603 X7R 16V 100N
C703 65G0603104 12 CER2 0603 X7R 16V 100N
C704 65G0603104 12 CER2 0603 X7R 16V 100N
C707 65G0603104 12 CER2 0603 X7R 16V 100N
C708 65G0603104 12 CER2 0603 X7R 16V 100N
C712 65G0603104 12 CER2 0603 X7R 16V 100N
C713 65G0603104 12 CER2 0603 X7R 16V 100N
C715 65G0603104 12 CER2 0603 X7R 16V 100N
C718 65G0603104 12 CER2 0603 X7R 16V 100N
D403 93G 6433P BAV99
D404 93G 6433P BAV99
D405 93G 6433P BAV99
D406 93G 39146 LL5232B
D407 93G 64 42 P BAV70 SOT-23
D408 93G 39146 LL5232B
D409 93G 39146 LL5232B
D410 93G 39146 LL5232B
D411 93G 39146 LL5232B
D412 93G 39146 LL5232B
D704 93G2004 2 SR24/PANJIT-SMT
FB401 71G 56K121 M CHIP BEAD
FB402 71G 56K121 M CHIP BEAD
FB403 71G 56K121 M CHIP BEAD
FB404 71G 56K121 M CHIP BEAD
FB405 71G 56K121 M CHIP BEAD
FB406 71G 56K121 M CHIP BEAD
FB410 71G 59C600 GP CHIP BEAD 50 OHM 1608 F
FB411 71G 59C600 GP CHIP BEAD 50 OHM 1608 F
FB412 71G 59C600 GP CHIP BEAD 50 OHM 1608 F
FB702 71G 56K121 M CHIP BEAD

62
 Dell E176FPc
Q401 57G 417 4 PMBS3904/PHILIPS-SMT(04
Q403 57G 417 4 PMBS3904/PHILIPS-SMT(04
Q703 57G 417 4 PMBS3904/PHILIPS-SMT(04
Q704 57G 763 1A AP2305N
Q706 57G 417 4 PMBS3904/PHILIPS-SMT(04
R101 61L0603472 RST SM 0603 RC0603 4K7
R402 61L0603249 0F CHIP 249OHM 1/16W 1%
R406 61L0603472 RST SM 0603 RC0603 4K7
R407 61L0603472 RST SM 0603 RC0603 4K7
R408 61L0603472 RST SM 0603 RC0603 4K7
R409 61L0603101 RST SM 0603 RC0603 100R
R410 61L0603101 RST SM 0603 RC0603 100R
R411 61L0603101 RST SM 0603 RC0603 100R
R416 61L0603472 RST SM 0603 RC0603 4K7
R417 61L0603472 RST SM 0603 RC0603 4K7
R419 61L0603000 RST SM 0603 JUMP MAX 0R
R421 61L0603562 CHIP 5.6K OHM 1/10W
R422 61L0603103 RST SM 0603 RC0603 10K
R423 61L0603472 RST SM 0603 RC0603 4K7
R424 61L0603472 RST SM 0603 RC0603 4K7
R425 61L0603472 RST SM 0603 RC0603 4K7
R426 61L0603103 RST SM 0603 RC0603 10K
R427 61L0603472 RST SM 0603 RC0603 4K7
R429 61L0603103 RST SM 0603 RC0603 10K
R432 61L0603472 RST SM 0603 RC0603 4K7
R434 61L0603750 RST SM 0603 RC22H 75R P
R435 61L0603750 RST SM 0603 RC22H 75R P
R436 61L0603750 RST SM 0603 RC22H 75R P
R438 61L0603750 9F 75OHM 1% 1/10W
R439 61L0603750 9F 75OHM 1% 1/10W
R440 61L0603750 9F 75OHM 1% 1/10W
R441 61L0603101 RST SM 0603 RC0603 100R
R442 61L0603101 RST SM 0603 RC0603 100R
R443 61L0603101 RST SM 0603 RC0603 100R
R444 61L0603103 RST SM 0603 RC0603 10K
R445 61L0603221 RST SM 0603 RC0603 220R
R446 61L0603221 RST SM 0603 RC0603 220R
R447 61L0603221 RST SM 0603 RC0603 220R
R448 61L0603222 RST SM 0603 RC0603 2K2

63
 Dell E176FPc
R449 61L0603222 RST SM 0603 RC0603 2K2
R450 61L0603472 RST SM 0603 RC0603 4K7
R451 61L0603472 RST SM 0603 RC0603 4K7
R452 61L0603472 RST SM 0603 RC0603 4K7
R453 61L0603221 RST SM 0603 RC0603 220R
R454 61L0603221 RST SM 0603 RC0603 220R
R455 61L0603221 RST SM 0603 RC0603 220R
R457 61L0603101 RST SM 0603 RC0603 100R
R458 61L0603101 RST SM 0603 RC0603 100R
R459 61L0603473 RST SM 0603 RC0603 47K
R460 61L0603473 RST SM 0603 RC0603 47K
R461 61L0603221 RST SM 0603 RC0603 220R
R462 61L0603221 RST SM 0603 RC0603 220R
R463 61L0603221 RST SM 0603 RC0603 220R
R464 61L0603221 RST SM 0603 RC0603 220R
R465 61L0603221 RST SM 0603 RC0603 220R
R466 61L0603103 RST SM 0603 RC0603 10K
R467 61L0603103 RST SM 0603 RC0603 10K
R468 61L0603103 RST SM 0603 RC0603 10K
R469 61L0603303 CHIP 30K OHM 5% 1/10W
R470 61L0603223 CHIPR 22K OHM +-5% 1/10
R471 61L0603223 CHIPR 22K OHM +-5% 1/10
R472 61L0603303 CHIP 30K OHM 5% 1/10W
R474 61L0603472 RST SM 0603 RC0603 4K7
R477 61L0603472 RST SM 0603 RC0603 4K7
R705 61L0603472 RST SM 0603 RC0603 4K7
R707 61L0603102 RST SM 0603 RC0603 1K P
R708 61L0603102 RST SM 0603 RC0603 1K P
R710 61L0603102 RST SM 0603 RC0603 1K P
R714 61L0603473 RST SM 0603 RC0603 47K
R721 61L0603000 RST SM 0603 JUMP MAX 0R
R723 61L0603473 RST SM 0603 RC0603 47K
R725 61L0603473 RST SM 0603 RC0603 47K
U401 56G 562101 GM2621-LF-BC
U402 56G1133 59CD2 SST25VF010-20-4C-SAE SO
U404 56G1133 34 M24C02-WMN6TP
U701 56G 585 4 AIC1117-33CY
U702 56G 563 27 AIC1117A-18CY SOT-223
AIK780KF2SMTP KEY BOARD

64
 Dell E176FPc
715G1564 1 PCB
C01 65G0603104 12 CER2 0603 X7R 16V 100N
C02 65G0603104 12 CER2 0603 X7R 16V 100N
CN1 89G176S 8 4 FFC CABLE
LED01 81G 14501 KT CHIP LED
SW01 77G 605 1 AL GP SMD SWITCH
SW02 77G 605 1 AL GP SMD SWITCH
SW03 77G 605 1 AL GP SMD SWITCH
SW04 77G 605 1 AL GP SMD SWITCH
ZD01 93G 39S 34 T UDZS5.6B
ZD02 93G 39S 34 T UDZS5.6B
ZD03 93G 39S 34 T UDZS5.6B
ZD04 93G 39S 34 T UDZS5.6B
ZD05 93G 39S 34 T UDZS5.6B
ZD06 93G 39S 34 T UDZS5.6B
PW1742CPD2SMTP POWER BOARD
40G 45762420A ID LABEL
52G6025 11935 MYLAR FOR PANEL
705G 780 57 D1 Q901 ASS'Y
705G 780 57 D2 Q203 ASS'Y
705G 780 93 D1 D921/D922 ASS'Y
C203 67G215L471 4N KY25VB470M-L10*16
C211 65L 3J1806ET 18PF 5% 3KV TDK
C212 65L 3J1506ET 15PF 3KV 5%
C213 65L 3J1506ET 15PF 3KV 5%
C214 65L 3J1806ET 18PF 5% 3KV TDK
C221 63G211J334 AB 0.33UF 5% 160V R75 BY A
C900 65G306M4722BP 4700PF +-20% 400VAC
C901 65G305M2222BP 2200PF +-20%
C902 65G305M2222BP 2200PF +-20%
C903 63G 107474 HS 0.47UF +-20% 275VAC
C904 67G215S10115K 100UF 450V
C923 67G215L102 4R LOW E.S.R 1000UF +/-20%
C924 67G215L102 4R LOW E.S.R 1000UF +/-20%
C925 67G215L471 4N KY25VB470M-L10*16
C926 67G215Y4713NV KY16VB470M-CC3 8*15MM
C931 67G215L102 4R LOW E.S.R 1000UF +/-20%
CN201 33G8021 2D AC CONN.2P R/A 87210-0236
CN202 33G8021 2D AC CONN.2P R/A 87210-0236

65
 Dell E176FPc
CN203 33G8021 2D AC CONN.2P R/A 87210-0236
CN204 33G8021 2D AC CONN.2P R/A 87210-0236
CN901 33G8029 3A H B2P3S-VH
CN902 95G8014 12523 WIRE
D901 93G 6026W52T FR107
DB901 93G 50460502 KBP206G
IC902 56G 139 3A PC123Y22FZOF
L201 73G 253515 L CHOKE COIL
L901 73L 174 50 LH LINE FILTER
L902 73G 174 65 LS LINE FILTER BY LISHIN
L903 73G 253 91 H CHOKE COIL
L904 73G 253 91 H CHOKE COIL
NR901 61G 58080 WT 8 OHM NCT
PT201 80GL17T 28 YS X'FMR YSTDA500101G
PT202 80GL17T 28 YS X'FMR YSTDA500101G
Q206 57G 761 7 KTD1691P
Q207 57G 761 7 KTD1691P
R908 61G152M10458G6267 100K OHM 5% 2W
R918 61G152M398 64 0.39 OHM 2W
T901 80GL17T 29 LS ADAPTOR BY LISHIN
PW1742CPD2AIP POWER BOARD
C201 65G0805104 22 0.1UF +-10% 25V X7R 080
C202 65G0805104 22 0.1UF +-10% 25V X7R 080
C204 65G0805104 22 0.1UF +-10% 25V X7R 080
C205 65G0805105 22 GP CHIP 1UF 25V X7R 0805
C207 65G0805331 32 CHIP 330P 50V X7R 0805
C208 65G0805104 22 0.1UF +-10% 25V X7R 080
C210 65G0805105 22 GP CHIP 1UF 25V X7R 0805
C222 65G0805474 22 CHIP 0.47UF 25V X7R 080
C223 65G0805105 22 CHIP 1UF 25V X7R 0805
C907 65G0805104 32 CHIP 0.1U 50V X7R
C911 65G0805471 31 CHIP 470PF 50V NPO
C912 65G0805102 32 CHIP 1000P 50VX7R 0805
C927 65G0805104 32 CHIP 0.1U 50V X7R
C928 65G0805104 32 CHIP 0.1U 50V X7R
C929 65G0805104 32 CHIP 0.1U 50V X7R
C932 65G0805474 22 CHIP 0.47UF 25V X7R 080
D201 93G 60264 B340A
D210 93G 6432P LL4148

66
 Dell E176FPc
D903 93G 6432P LL4148
D923 93G 6432P LL4148
D924 93G 6432P LL4148
F902 61L1206000 RST SM 1206 JUMP MAX 0R
IC201 56G 608 1 TL1451ACD
IC901 56G 379 54 NCP1203D60R2G BY ON
Q201 57G 760 5 DTC144WKA BY ROHM SMT
Q202 57G 760 4 DTA144WKA BY ROHM SMT
Q204 57G 417 4 PMBS3904/PHILIPS-SMT(04
Q205 57G 417 6 PMBS3906/PHILIPS-SMT(06
R201 61L0805240 1F CHIPR 2.4KOHM +-1% 1/8W
R202 61L0805221 CHIPR 220 OHM +-5% 1/8W
R203 61L0805240 1F CHIPR 2.4KOHM +-1% 1/8W
R204 61L0805471 CHIPR 470 OHM+-5% 1/8W
R205 61L0805163 CHIP 16KOHM 1/10W
R206 61L0805123 CHIP 12KOHM 1/8W
R207 61L0805103 CHIPR 10K OHM +-5% 1/8W
R208 61L0805000 CHIP O OHM 1/8W
R209 61L0805000 CHIP O OHM 1/8W
R210 61L0805473 CHIPR 47K OHM +-5% 1/8W
R212 61L0805623 CHIPR 62K OHM +-5% 1/8W
R213 61L0805472 CHIRP 4.7K OHM +-5% 1/8
R214 61L0805123 CHIP 12KOHM 1/8W
R229 61L0805681 680 OHM 1/10W
R230 61L0805471 CHIPR 470 OHM+-5% 1/8W
R231 61L0805123 CHIP 12KOHM 1/8W
R232 61L0805510 2F CHIP 51K OHM 1/10W
R900 61L1206334 330K 1/4W
R901 61L1206334 330K 1/4W
R902 61L1206334 330K 1/4W
R903 61L1206332 CHIP 3.3K OHM 5% 1/8W
R904 61L1206332 CHIP 3.3K OHM 5% 1/8W
R905 61L1206332 CHIP 3.3K OHM 5% 1/8W
R909 61L0805220 CHIP 22 OHM 5% 0805 1/8
R910 61L0805222 CHIP 2.2KOHM 5% 0805 1/
R911 61L0805362 CHIP 306KOHM 1/8W
R912 61L0805101 CHIPR 100 OHM +-5% 1/8W
R913 61L0805753 75K 1/8W
R914 61L0805472 CHIRP 4.7K OHM +-5% 1/8

67
 Dell E176FPc
R915 61L0805220 CHIP 22 OHM 5% 0805 1/8
R916 61L0805221 CHIPR 220 OHM +-5% 1/8W
R917 61L0805103 CHIPR 10K OHM +-5% 1/8W
R919 61L0805203 CHIPR 20KOHM +-5% 1/8W
R924 61L0805102 CHIPR 1K OHM +-5% 1/8W
R925 61L1206000 RST SM 1206 JUMP MAX 0R
R929 61L0805330 2F CHIP 33KOHM 1/8W 1%
R930 61L0805360 1F CHIP 3.6KOHM 1/8W 1%
R931 61L0805102 CHIPR 1K OHM +-5% 1/8W
R932 61L0805102 CHIPR 1K OHM +-5% 1/8W
R933 61L0805240 1F CHIPR 2.4KOHM +-1% 1/8W
ZD201 93G 39S 8 T RLZ11B LLDS
ZD901 93G 39S 44 T RLZ18B LLDS
ZD902 93G 39S 25 T RLZ5.1B LLDS
ZD903 93G 39S 38 T PTZ 9.1B
ZD904 93G 39S 40 T RLZ 13B LLDS
ZD905 93G 39S 25 T RLZ5.1B LLDS
715G1492 1 FR PCB
C209 67G 305330 7T 33UF 105 　
C904 6G 31502 1.5MM RIVET
C905 65G 2K152 1T6921 1.5NF/2KV Y5P +-10%
C906 67G 2151014KT 100UF
C909 67G 3054704KT 47UF
C921 65G517K102 5T 1000PF 10% Y5P 500V
C922 65G517K102 5T 1000PF 10% Y5P 500V
CN901 6G 31500 EYELET
D202 93G 64 1152T 1N4148
D203 93G 64 1152T 1N4148
D204 93G 64 1152T 1N4148
D205 93G 64 1152T 1N4148
D206 93G 64 1152T 1N4148
D207 93G 64 1152T 1N4148
D208 93G 64 1152T 1N4148
D209 93G 64 1152T 1N4148
D902 93G1020 752T UF4003
F901 84G 56 1 FUSE 2A 250V WICKMANN
IC903 56G 158 12 KIA431A-AT/P TO-92
J914 71G 55 9 T FERRITE BEAD
L902 6G 31502 1.5MM RIVET

68
 Dell E176FPc
Q901 6G 31502 1.5MM RIVET
Q902 57G 420 PP T 2PA733P
Q903 57G 419 PP T 2PC945P
R221 61G 17218252T 1.8KOHM 5% 1/4W
R222 61G 17218252T 1.8KOHM 5% 1/4W
R223 61G 17218252T 1.8KOHM 5% 1/4W
R224 61G 17218252T 1.8KOHM 5% 1/4W
R225 61G 17210252T 1K OHM 5% 1/4W
R226 61G 17210252T 1K OHM 5% 1/4W
R227 61G 17210252T 1K OHM 5% 1/4W
R228 61G 17210252T 1K OHM 5% 1/4W
R921 61G175L47052T 47OHM +-5% 1/2W
R922 61G175L47052T 47OHM +-5% 1/2W
R923 61G 17256152T 560 OHM 5% 1/4W
T901 6G 31502 1.5MM RIVET
90G6240 1 HEAT SINK
M1G1730 8128 SCREW M3x8
Q901 57G 749 1C 2SK3264
15G6284 1 PLATE
90G 411501 HEAT SINK
M1G 330 4128 SCREW M3X4
Q203 57G 763 12 AOU401 BY AOS
90G6240 2 HEAT SINK
M1G1730 8128 SCREW M3x8
D921 93G 60239 FME-210B T0-220
D922 93G1506 2 FMW-2156
87G 501 14 RF AC SOCKET
95G 900595 WIRE
95G8021 3 11 HARNESS
96G 29 6 SHRINK TUBE UL/CSA
12G6097 1 PORON
15G8188 1 BASE BKT
15G8190 1 VESA-PLATE
20G 030 1 STAND DIE CAST
34G1614 Y2 B VESA COVER
34G1615 SN B RISER FRONT
34G1616 Y2 B RISER BACK
34G1617AST B BASE
37G 535 2 HINGE ASS'Y(17")

69
 Dell E176FPc
M1G 130 6125 SCREW
M1G 130 8120 SCREW
M1G 140 8225 SCREW M3X8
Q1G 130 8 47 SCREW

15. Definition Of Pixel Defects

15.1 CLAA170EA 07

70
 Dell E176FPc

71
 Dell E176FPc
15.2 LM170E01-TLB3 / LM170E01-TLB4
15.2.1 Dot Defect
15.2.1.1 Bright Dot
Dots (sub-pixels) which appeared brightly in the screen when the LCM displayed with dark pattern.
- R, G or B 1 dot --------------------------------- 0 Max
- Adjacent 2 dots -------------------------------- 0 Max
- Total amount of Bright dots -------------------- 0 Max
- Minimum distance of Bright dots --------------- NA
15.2.1.2 Dark Dot
Dots (sub-pixels) which appeared darkly in the screen when the LCM displayed with bright pattern.
- 1 dot -------------------------------------------- 4 Max
- Adjacent 2 dots -------------------------------- 2 Max
- Total amount of Dark dot ---------------------- 4 Max
- Minimum distance of Dark dots --------------- 15mm
15.2.1.3 Total amount of Dot Defects -------------------- 5 Max (Combination)
Note) a. Every dot herein means Sub-Pixel (Each Red, Green, or Blue Color)
b. Bright dot
- Red or Blue dots smaller than half size of sub-pixel are not counted as a defect dots.
- Green dots smaller than 1 / 3 size of sub-pixel are not counted as a defect dots.
c. Dark dots smaller than half size of sub-pixel are not counted as a defect dots.
15.2.2. Polarizer Defects

Where, W: Width
L: Length
D: Average diameter =(a+b)/2

a. Extraneous substances, which can be wiped out, like Finger Print, Particles, are not considered as a defect.
b. Defects which are on the Black Matrix (outside of Active Area) are not considered as a defect.
15.2.3 Foreign Material

72
 Dell E176FPc
Where, W: Width
L: Length
D: Average diameter =(a+b)/2

15.2.4 Line Defect

All kinds of line defects such as vertical, horizontal or cross are not allowed.
15.2.5 Bezel Appearance
Scratches, minor bents, stain, particles on the Bezel frame are not considered as a defect.
15.2.6 others
Issues, which are not defined in these criteria, shall be discussed with both parties, Customer and Supplier, for
better solution.

73