Name I/C
:………………………………………………… :………………………….
PENGGAL 1
960/1 STPM 2019
JABATAN PENDIDIKAN NEGERI KELANTAN
SIJIL TINGGI PERSEKOLAHAN MALAYSIA
PHYSICS 1 (FIZIK 1)
MODUL 1
MARKING SCHEME
Section A [15 marks]
1 C 6 C 11 B
2 D 7 C 12 D
3 D 8 C 13 C
4 A 9 A 14 D
5 A 10 D 15 B
Answer mark
16 (a)( i) work done by a force F when the displacement of its point of 1
application, s is given by work = F.s
(ii) Energy is the ability to do work. 1
(b) (i) work done by the force = Fs
= 15 x 0.80 J 1
= 12 J 1
(ii) work done by the machine = 50 x 0.20 1
1
= 10 J
workdone
(iii) efficiency of the machine
energinput
1
10
x 100% 1
12
= 83 %
TOTAL 8
17 PV
(a) Ideal gases obey all the three gas law. For any ideal gas k k is constant 1
T
(b) Assumptions made
1. The gas molecules are in continuous, free and random motion.
2. The gas molecules collide with one another and the walls of the containing
vessel elastically.
3. Forces between molecules are negligible except during collision.
4.The volume of the gas molecules is negligible compared with the volume of the
gas.
5. The time of collision between molecules is negligible compared with the time
between collision. Any 3
(c) the mean speed of deuterium nuclei at this temperature.
TOTAL 7
18 (a) ampere, seconds 1, 1
(b) It is the product of two or more base units. 1
mass, m
(c) (i) ρ=
volume,V 1
kg 1
Base unit of ρ=
m3
force
(ii) p=
area 1
kgms2
=
m2
= kg m-1 s-2. 1
kgm1 s 2
(iii) unit c = 1
kgm3
= m s-1 1
1
(iv) speed or velocity 1
(d) (i) mass, temperature rise1
(ii) ( a) thermal energy
= unit of work
= unit of force x displacement 1
= kg m2 s-2 1
b) the constant c
kgm 2 s 2 1
=
(kg) K
1
= m2 s-2 K-1
TOTAL 15
19 a) An object will remain at rest or move along a straight line with constant
speed, unless it is acted upon by a force.
b) The impulse of a constant force is the product of the force and the time
duration that it acts
Impulse = Ft
c) i) Change of momentum of car = mv-mu
=1000(0.8 – 0)
=800kgms-1
ii) Using F=ma
4000 =1000 x a
a=4ms-2
u=0, v=0.8ms-2
v2 = u2 + 2as
(0.8)2= 0 +2(4)s
s=0.08 m
iii) Time taken for towed car to reach the speed of 0.8ms-1, t is given by
v=u + at
0.8=0+4t
t=0.2s
in 0.2s, the towing vehicle travelling at a constant velocity of 0.8ms-1 moves
through a distance
s1=0.8 x 0.2
=0.16m
d) i) Newton’s Second law
Force, F=rate of change of momentum
Third Law F=-F
m1v1 + m2v2 = m1u1 +m2u2
sum linear momentum after collision =sum linear momentum before collision
ii)
TOTAL 15
20 a) Young modulus= / the relationship/ratio between stress (force
per unit area) and strain (proportional deformation) in a material.
b)
BC= =50.04cm
Extension of wire =2(50.04-50.00)cm=8.0x10 -4
2Tcosϴ=mg
T=
Modulus young , E=
= 1.993 x 1011 Nm -2
c) (i) Tensile strength=
=
= 1.72 x 108 Nm -2
(ii) Using tensile strength = =1,72 x108
F=5.0 x 10-4 N
(iii) the value of F differs from the experimental value of 0.01N because
the radius of glass fibre is very small compared to the radius of
glass rod (1.0mm). Therefore, the tensile srength for glassrod is
not the same as that of a glass fibre.
(d)
TOTAL 15
