69MR500-4 BULLET: Professional Midrange Driver

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

69MR500-4

Professional Midrange Driver


BULLET
KEY FEATURES

• 1.5” Voice coil


• 250 Watts continuous power handling
• 96 dB Sensitivity
• 150 - 12,500 Hz
Nominal Diameter 6 x 9" (152 x 228 mm)
Nominal impedance 4 ohms
GENERAL SPECIFICATIONS

Rated Power Handling 250 Watts


Program Power 500 Watts
Sensitivity 2.00V at 1m 96 dB
Recommended Hi Pass Crossover* 145 Hz*
*For Full Power Handling *12db Per Octave Crossover

Frequency Response 150 - 12,500 Hz


Voice Coil Diameter 1.5" (38 mm)

6.43" (163.5mm)
5.90" (150mm)
Voice Coil Wire CCAW
Voice Coil Winding Depth 9.5 mm
Former Material Kapton
Magnetic Gap Depth 6.0 mm
Frame Material Stamped Steel

Equivalent Volume Vas 5.21 l


THIELE-SMALL PARAMETERS

Excursion (mathematical)*** Xmax 3.25 mm


3.48" (88.5mm)

3.85" (98mm)
Free Air Resonance Fs 148.9 Hz
Mechanical Factor Qms 16.80
Electrical Factor Qes 1.20
Total Factor Qts 1.12
Cone Area Sd 216 cm² 4.76" (121mm)
Mechanical Mass Mms 13.11 g 8.60" (218.5mm)
Bl Factor Bl 5.86 Tm 9.29" (236mm)
Dc Resistance Re 3.3 Ohms Frequency Response Measured at 2.00V/1m
110
Inductance Le 0.13 mH at 1 kHz
dBSPL
Mechanical Mass Without Air Mmd 11.31 g
100
Mechanical Compliance Cms 0.080 mm/N
90

Overal Diameter 6.43 x 9.29"(163.5x236 mm)


EXTRA INFO

80
Front Mount Baffle Cutout 5.78 x 8.60" (150x218.5 mm)
Mounting Depth 3.48" (88.5 mm)
70
Overall Depth 3.85" (98 mm)
Net Weight 4.4 Lbs (2.00 kg)
60
Shipping Weight 4.62 Lbs (2.10 kg) 20 50 100 200 500 1k 2k Hz 5k 10k 20k

Carton Dimensions W x L x H 8.66" x 7.48" x 4.33" PRV AUDIO USA (USA and Export) PRV AUDIO BRAZIL (Brazilian Sales Only)
FORT LAUDERDALE, FL SAO LEOPOLDO, RS
(220 x 190 x 110mm) [email protected] [email protected]
***Xmax=(Voice coil winding depth-Magnetic Gap depth)/2+ Mgnetic Gap Depth/4 www.prvaudio.com www.pvaudio.com.br
PRV Audio strives to manufacture the best drivers in the Professional Loudspeaker industry. Specifications are subject to change due to continuous product improvement - Rev: 05/20

You might also like