Ultimate Boot CD: Reset Hard Disk Password
Ultimate Boot CD: Reset Hard Disk Password
Ultimate Boot CD: Reset Hard Disk Password
Do search with Bing for atapwd or “ata password” its part of the new
ATA spec. You can enter a “master password” that will remove the “user
password” that has be setup on the drive. This master password is
manufacturer specific. So search your hard drive manufacturers website
for Bing around for a list of master passwords. Remember you CAN lock
out your drive. This is bad. You can always remove the password
without the master password but when you do it using that method the
drive will be wiped. So the only way to solve this is to find a master
password or try and work out what user password was set on the hard
drive. To try out Master password for unlocking your HD you need to
have Ultimate boot CD and can use “mhdd” utility included in that CD , it
is easy and work well.
Hi friends!
After 5 years my laptop acer aspire 5044 NWLCI have problem with bios password, now i was found the
solution!
I just found the dos program for acer product call "clnpwd". Very easy to use this trouble shoot. Actually i
already try another solution such as reset cmos using jumper, unplug cmos battery, using hiren boot and
etc. But all the solution failed.
Please refer to below step : (You need standby 1 USB Storage and need to format it)
2)Then, extract the file. You will found folder dos, clnpwd.exe, and HP USB Disk Storage Format Tool.
4)Install HP USB Disc Storage Format Tool. After finish install, you need to run this progam using
administrator. (Right click to the icon HP USB Disc Storage Format, select run as administrator)
5) THIS STEP NEED TO FORMAT YOUR USB STORAGE. MAKE SURE BACKUP YOUR DATA
FIRST.
At HP USB Format Tool, select your usb storage.
File system : FAT - for usb storage below 2GB
FAT32 - for usb storage more than 4gb
Format Option :
Tick Quick Format and Create a DOS startup disk - using DOS system files located at : (browse folder
boot_dos and select it.
6) Open folder clnpwd, copy folder boot_dos and clnpwd.exe to your usb storage.
7) Your usb storage now ready to help you reset bios password.
Plug-in usb storage to your acer laptop, turn on the laptop, tap F12 until appear Boot Menu.
Select USB. (If not in list, you need to unplug laptop hard disc. On laptop without harddisc, no need to tap
F12)
8) If your usb storage got install properly, your laptop will boot dos program.
On dos program, type as below:
What you need to do is: key in number Password you want reset.
If you not sure, you can try all. Haha.
9) Reboot your laptop. Press F2 to check the password required appear again or not.
If still appear, you need to find anoter solution. GOOD LUCK ;-)