RESUME

Anupam Neelabh Present Address

Mobile (+91) 8149244207 Flat No. 20/B, ASTHA Society
Email: [email protected] Dapodi
Pune – 411 012, India

Summary of Experience & Qualification:

 Total no. of years of industry experience–9.5 Years (oil-gas and refinery)

 Highest Education: B.Tech in Electronics & Instrumentation
 Areas of Interest : Process Industries: On & Offshore Oil/Gas drilling,
Refineries, Chemicals & Petrochemicals, Fertilizer,
Steel, Pharmaceuticals, Other process industries

Areas of Specialization :
 Project Engineering (Global Projects )
 Delta V DCS ,advance control, Installation & Commissioning of DCS
Programming and graphics integration )
Passport Number:
 Project Proposal & Execution (Field Instruments & automation) Z30397....
 Application Engineering (Field Instruments Flow Temperature , DP-LEVEL
and Radar)
Resume Updated On:
March 17, 2021

Technical Skill Set

Automation (DCS)  Experience on Emerson DCS Delta V: version 13.3.1 and 14.3.1
 Knowledge of Delta V DCS system architecture, hardware,
communication, Network, Virtualization, Applications,
complementary products, License and installations ,LOOP
development & Commissioning .
 Graphics and program, development (database creation and
integration with graphics ifix and DeltaV Live ),OPC
 Knowledge of Virtualization on Delta V virtual studio ,VRTX and
VMware (Virtual machine setup ,networking and DCS
 Technical Skill Set
installation)
 Siemens Automation Products: PLC (S7 200,300), SCADA,
 PLC ,DCS & SCADA development and commissioning
Field Instruments  Design and selection of field instruments according to process
industries requirement for(oil and gas /refineries ):
SMART Transmitters (Pressure, Temperature) ,RADAR (ncr ,
GWR) Level Transmitters / Level Switches ,Temperature
Elements (RTD, T/C and T-Well),Flow Elements (Orifices,
Averaging Pitot Tube),Remote seals , Hazardous area
Certification according to country and area classifications
specific requirement .
 Knowledge of P&ID and hook-up drawings
 Calculation & optimization of all kinds of process measurements,
Creation of instrument specifications (datasheet) for all typical
process applications (Flow, Temperature, Pressure, Level etc.)
Orifice bore size calculation , Remote seal performance ,Annubar
sizing , WFC (stress test on thermo well ) etc
 Various Test & certifications required as per country and
application specification (NACE , Hydro test , NDT ,Hardness
test etc )
Tools and Software’s  MS Office, MTM (micro soft test manager for Delta V Testing),
 Instrument Toolkit (Rosemount), SharePoint, CRM, Clarity.
 Simatic Manager and win cc Siemens PLC software
 iFix , DeltaV software installations , Delta V Live ,History analysis
 Knowledge of MS-Access & MS-Excel

Qualifications
Education  B.TECH. (Electronics & Instrumentation), University of Burdwan,
2006-2010 Batch – 77% , Hons
 Class XII, 2003 Batch-73%
 Class X, 2001 Batch-79%
Languages  English, Hindi – Read, Write & Speak
Trainings & Cert
Non – Technical/ Management  PMO Training by Emerson
Technical  Process Lab training at SMMC, Emerson -Singapore.
 Process Lab training at IMMC, Emerson -India.
 VFD Training , G120 by Siemens Ahmadabad
 Training of Siemens PLC and SCADA by HIMAK , Baroda

Current Organization - Emerson Process Management

Role / Responsibilities -- Date : - 7th July 2014 – Till Date
Designation: Function/ Position Description including KRA
Sr. System Engineer
DCS (Emerson-oil & gas ) Lead Engineer :
Job Location: Pune  Leading (Team Size 11) delta V DCS development team for
functionality and feature testing. Assignment of Tasks, Sprint
planning, solving technical queries, supply of adequate infrastructure,
providing weekly /sprint report to the Assistant Director.
 Identifying DCS engineering issues /bugs in the software and suggest
coding team for resolution , Hot fix management
 Design/Implementation of graphics from sketches/snapshots/P&IDs
 Database creation and software development includes, IO Listing and
assignment, Control modules and function blocks, Interlocks and
Simple and complex loop development.
 Support Factory Acceptance Test (FAT) activities
 Supporting development of multi language operator and engineering
platforms for Delta V
 Study, review and correct logic and hardware documentation (SAMA,
Wiring Diagrams)
 Loop checks & Instrumentation setting and testing (Hart, protocol, …
 Tune and monitor both closed and open loop functions
 Troubleshooting both hardware and software problems/incidents
 Inter-change with client and third parties
 As part of solutions engineering team, we interact regularly with our
customers to understand process control requirements .

Major Achievements (DCS- engineer) :-

1. BP project : Software development , more than 16K I/O s
2. BS VI complaint : IOCL ,Hydrogen Gen Unit and Sulphur Recovery
Unit , Database Creation ( IO Listing and Assignment , Interlock ,
control module and function block development etc )
3. Delta V version 14.3.1 Delta V Live development Support as DCS
functionality Test Engineer on cloud environment

PREVIOUS PROFESSIONAL WORK EXPERIENCES

2.A-Z instrument services ,Baroda, Gujarat
Role / Responsibilities -- Date : -Sep 2013 – 5th June 2014 (9 months)
Designation:  Application Engineering of field instruments / Business Development
Instrument Engineer  Safety requirement specification study.
 Detailed engineering with client.
Job Location: Vadodara  Routine Calibrations of Pressure Transmitters, Temperature
Transmitters, Flow Transmitters etc.
 Creation and review of Datasheet and instrument specifications
 Providing Training to Technicians

1.Himak Process control Pvt LTD

Role / Responsibilities -- Date : -Sep 2010 – Aug-2013 (3 Years )
Designation:  Completed various Projects for automation of process plants.
Executive-Project Engineer  Selection of Controllers and I/O cards
Job Location: Vadodara  Control Narrative, logic development, interlocks etc.
  SCADA programming and Graphics development
 Onsite commissioning, and maintenance of Siemens (s 7- 300, 400 )
Major Projects accomplished :-
1. Project Name: Automation of API plant.
Client Name: Gujarat alkaline chemical limited ,Dahej
Description: Graphic development of SCADA and Siemens PLC S7-300
featured with Reporting of data log facility etc .Programming and
commissioning.
2. Project Name: Automation of Microwave dryer system.
Client Name: Apothecon pharmaceuticals,vadodara
Description: developed a program on S7-400 plc of Siemens
connected with Profibus to VFD and graphics development on SCADA

Personal Information
Father’s Name Birendra Prasad
Mother’s Name Manju Verma
Wife’s Name Shreya Verma
DoB 05-09-1986
Marital Status Married
Nationality Indian
Personal skills Self-starter ,take accountability of responsibilities, drive initiatives even with
limited resources, independent & self-motivated, & love to work in teams,
Permanent Address Pratap Nagar Sitamarhi ,Bihar
Hobbies Painting & Drawing, Travelling
Preferred Location Open For Pan India

I certify that the statements made by me are true, complete and correct to the best of my knowledge and
belief.

Date: March 17, 2021 Signature:

Place: Pune (Anupam)