MSDS - PS-200 PVC Pipe Adhesive

M AT E R I A L S AF E T Y D AT A S H E E T
PS-200 PVC PIPE ADHESIVE
1. Product & Company Identification

1.1 Product Detail
Product name: PS-200 PVC PIPE ADHESIVE
Physical form: Viscous Liquid
Odour: Aromatic Odour
CAS No.: Mixture
Flammability: Highly Flammable
1.2 Company Details:

Manufacturer: Mohm Chemical Sdn Bhd
Address: No. 32, Jalan Temenggong, Off Jalan Tampoi, 81100 Johor Bahru,
Johor, Malaysia.
Tel: + 60-7-3331222
Fax: + 60-7-3320545/ + 60-7-3337919
2. Composition/ Hazardous Components

Chemical Name % Hazard
PVC Resin < 17 None currently known
Ketone Solvent > 83 Flammable, Irritant, Harmful by
inhalation
3. Hazards Identification
Ingestion: Harmful.
Skin contact: Uncured product contact will irritate lips, gums and tongue.
Uncured product contact may irritate the skin.
Inhalation: High vapour concentrations may cause irritation, headache and
dizziness.
Eye contact: Uncured product contact irritates eyes.
4. First-aid Measures
Take off all contaminated clothing immediately.
In case of inhalation Remove to fresh air, keep warm and at rest.
In case of skin contact: Removed contaminated clothing. Rinse with water and use a
proprietary skin cleaner immediately.
In case of eyes contact: Contact lenses should be removed. Rinse with plenty of water
Immediately, seek medical advice if necessary.
Advice to doctor: Treat symptomatically.
1|Page
5. Fire Fighting Measures

Flammability: Highly Flammable.
Suitable extinguishing media: Chemical Powder, Foam, CO², Water Fog, Sand or Earth
Unsuitable extinguishing media: Do not use water in a jet
6. Accidental release measures

Methods: Exclude sources of ignition and ventilation the area
Exclude non-essential personnel. Avoid breathing vapour
Collect spillages mechanically and store in suitable covered container
7. Handling and Storage

Handling: Ensure good ventilation during processing. Wear safety
shoes.
Protection against fire/ explosion: General rules of fire prevention should be observed.
Storage: Keep container tightly closed and dry. Store in a well-
ventilated area.
8. Exposure control/ Personal protection

Industrial Hygiene: Remove immediately all contaminated clothing. Do not inhale vapour.
Hand protection: Suitable protective gloves.
Eye protection: Safety / Protective Goggles
9. Physical and Chemical Properties

Form: Viscous liquid
Specific gravity: 0.88 ± 0.02
Colour: Colourless
Viscosity: 160-200 cps
Odour: Aromatic odour
Solid Content 16 ± 1%
Melting Temperature Not Applicable
Boiling point: 79 – 82 °C
Flash point: – 4 °C
Freezing Point – 86.4 °C
Ignition Temperature: Non known
Vapour Pressure (25°C) Non known
Soluble in Water (25°C) Insoluble
Note: the above information is not intended for use in preparing specification.
2|Page
10. Stability and Reactivity

Hazardous Decomposition Products None
Hazardous Reaction No dangerous reaction known
11. Toxicological Information

On the skin: May cause sensitization
On the eye: Possibility irritating
12.Ecological Information
Large quantities of products should not be allowed to enter drains or watercourses or be
deposited where it can affect ground or surface water.
13.Disposal considerations
Do not allow large quantities to enter the drains or watercourses or dispose of where ground
surface may be affected. Residue in emptied containers should be covered and should be
disposed of in accordance with regulations made under the control of Pollution & Environment
Protection Acts.
14. Transport Information

ICAO/IATA-DGR: CLASS 3, FLAMMABLE LIQUID, UN CODE 1133, PACKING: GROUP II
15. Regulatory Information

The product is classified and labeled for supply in accordance with the Classification Of
Hazardous Chemical. Regulations as follow :-
Classification Highly Flammable
Harmful Flammable
Irritant to skin
R-phrases 43 May causes sensitization by skin contact
36/38 Irritant to skin
S-phrases Z Keep out of reach of children
28 After contact with skin, wash immediately with plenty of water
26 In case of contact with eyes, rinse immediately with plenty of water and
seek medical advise
27 Take off immediately all contaminated clothing
37 Wear suitable gloves
46 If swallowed, seek medical advice immediately and shoe this container
or label
Labeling (EC):
3|Page
16. Other Information

These data are offered in good faith as typical values and not as a product specification. No
warranty, either expressed or implied, is hereby made. The recommended industrial hygiene
and safe handling procedures are believed to be generally applicable. However, each user
should review these recommendations in the specific content of the intended use and
determine whether they are appropriate.
*** End of MSDS ***
4|Page

MSDS - PS-200 PVC Pipe Adhesive

Uploaded by

Copyright:

Available Formats

MSDS - PS-200 PVC Pipe Adhesive

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

MSDS - PS-200 PVC Pipe Adhesive

Uploaded by

Copyright:

Available Formats

M AT E R I A L S AF E T Y D AT A S H E E T

PS-200 PVC PIPE ADHESIVE

1. Product & Company Identification

1.2 Company Details:

2. Composition/ Hazardous Components

PS-200 PVC PIPE ADHESIVE

5. Fire Fighting Measures

6. Accidental release measures

7. Handling and Storage

8. Exposure control/ Personal protection

9. Physical and Chemical Properties

PS-200 PVC PIPE ADHESIVE

10. Stability and Reactivity

11. Toxicological Information

14. Transport Information

15. Regulatory Information

PS-200 PVC PIPE ADHESIVE

16. Other Information

*** End of MSDS ***

You might also like

* End of MSDS *