Scribd Logo
Upload

Welcome to Scribd!

  • 215 views

    Vav-Sd: Features and Highlights

    Uploaded by

    Allan Anthon
    The Alerton® BACtalk® VAV-SD controller is a versatile BACnet-compliant field controller that provides pressure-independent control of any singleduct variable air volume (VAV) box. As a native BACnet controller, the VAVSD integrates seamlessly with your BACnet system, communicating at up to 76.8 Kbps on a BACnet MS/TP LAN. The VAV-SD-F includes a filter to reduce dust contamination.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Vav-Sd: Features and Highlights

    Uploaded by

    Allan Anthon
    215 views2 pages
    The Alerton® BACtalk® VAV-SD controller is a versatile BACnet-compliant field controller that provides pressure-independent control of any singleduct variable air volume (VAV) box. As a native BACnet controller, the VAVSD integrates seamlessly with your BACnet system, communicating at up to 76.8 Kbps on a BACnet MS/TP LAN. The VAV-SD-F includes a filter to reduce dust contamination.

    Original Title

    LTBT-VAV-SD

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The Alerton® BACtalk® VAV-SD controller is a versatile BACnet-compliant field controller that provides pressure-independent control of any singleduct variable air volume (VAV) box. As a native BACnet controller, the VAVSD integrates seamlessly with your BACnet system, communicating at up to 76.8 Kbps on a BACnet MS/TP LAN. The VAV-SD-F includes a filter to reduce dust contamination.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    215 views2 pages

    Vav-Sd: Features and Highlights

    Uploaded by

    Allan Anthon
    The Alerton® BACtalk® VAV-SD controller is a versatile BACnet-compliant field controller that provides pressure-independent control of any singleduct variable air volume (VAV) box. As a native BACnet controller, the VAVSD integrates seamlessly with your BACnet system, communicating at up to 76.8 Kbps on a BACnet MS/TP LAN. The VAV-SD-F includes a filter to reduce dust contamination.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    VAV-SD

    Features and highlights


    • Capable
    Four 10-bit inputs and five binary
    outputs.

    • Interoperable
    Fully BACnet-compliant on MS/TP
    LAN at up to 76.8 Kbps.

    BACnet is a registered trademark of ASHRAE. ASHRAE does not endorse,


    approve or test products for compliance with ASHRAE standards. Compliance of

    � listed products to requirements of ASHRAE Standard 135 is the responsibility of


    the BACnet Manufacturers Association (BMA). BTL is a registered trademark of
    the BMA.

    • Versatile
    Downloadable operating code
    to allow for future software
    improvements.

    • Reliable
    Extensive on-board filtering, with
    all program data backed up in
    nonvolatile flash memory.

    • Accurate
    Factory calibrated at multiple
    velocity points and field-adjustable The Alerton® BACtalk® VAV-SD controller is a versatile BACnet-compliant
    during balancing. field controller that provides pressure-independent control of any single-
    duct variable air volume (VAV) box. As a native BACnet controller, the VAV-
    SD integrates seamlessly with your BACnet system, communicating at up
    to 76.8 Kbps on a BACnet MS/TP LAN. The VAV-SD-F includes a filter to
    reduce dust contamination.

    The BACtalk VAV-SD contains an integral airflow sensor to provide


    pressure-independent operation of the VAV box. Each airflow sensor is
    factory-calibrated at multiple velocity points. Minimum, maximum, and
    reheat airflows can be entered either at an Alerton Microset™ wall unit or
    an operator workstation. A technician can adjust the calibration in the field
    during balancing to compensate for slight variations in box installation and
    type.

    All control algorithms are factory-loaded into nonvolatile flash memory


    and can be field-modified. The VAV-SD can execute control algorithms
    independently of other equipment. All calibration, programming, and
    operator-entered setup data is stored in flash memory for further assurance
    of stable, reliable, and independent operation.

    The BACtalk VAV-SD is your complete answer to control of all single-


    duct VAV boxes in a BACnet environment. With its integral airflow sensor
    and programming flexibility, the VAV-SD provides every option for precision
    VAV box control.
    6670 185th Avenue Northeast, Redmond, WA 98052 USA • Tel: 425.869.8400 • Fax: 425.869.8445 • www.alerton.com
    2 of 2 LTBT-VAV-SD Rev. 0004
    © Honeywell International Inc. All rights reserved. Alerton is a registered trademark of Honeywell.
    VAV-SD
    Technical Data
    • Power  24 VAC @ 5 VA min., plus binary output loads (65 VA max). Utilizes
    a half-wave rectifier, which allows a single transformer to power multiple
    VLCs. One leg of 24 VAC connects to earth (panel) ground.

    • Inputs 4 universal inputs with 10-bit resolution. Input 0 can be used for a
    BACtalk Microset. Inputs 1–3 support thermistor/dry contact.

    • Binary outputs 5 outputs, each rated at 24 VAC, 0.5 A. Three outputs


    utilize hot-switched triacs. Two outputs utilize ground switching triacs for
    damper motor control. All outputs have a common connection to the fused 24
    VAC supply.

    • Pressure sensor 0–1.25 inches water column differential pressure sensor.

    • Processor & Memory Motorola AZ60 processor with on-board flash


    memory. Flash memory provides nonvolatile program and data storage and
    allows for encrypted updates to the program for future product enhancements.

    • Max. Dimensions 5.20” (132mm)H x 3.30” (84mm)W x 1.40”


    (36mm)D.

    • Terminations Removable header-type screw terminals accept 14–24


    AWG wire. An additional header is provided for easy connection to MS/TP for
    testing.

    • Environmental 0–158 deg. F (-17–70 deg. C). 0–95% RH, non-


    condensing.

    • Communications BACnet MS/TP LAN up to 76.8 Kbps.

    • BACnet conformance An application specific controller


    �

    (ASC); tested and approved by BTL. See Protocol


    Implementation Conformance Statement (PICS). �
    BACnet is a registered trademark of ASHRAE. ASHRAE does not endorse,
    approve or test products for compliance with ASHRAE standards. Compliance of
    listed products to requirements of ASHRAE Standard 135 is the responsibility of
    the BACnet Manufacturers Association (BMA). BTL is a registered trademark of
    the BMA.

    • Ratings

    Listed Underwriters Laboratory for Open Energy Management Equipment


    (PAZX) under the UL Standard for Safety 916; listing includes both U.S. and
    Canadian certification

    EMC Directive 89/336/EEC (European CE Mark)

    FCC Part 15, Subpart J, Class A

    Ordering information
    Item number Description

    VAV-SD Single-duct variable air volume controller

    VAV-SD-C VAV-SD field controller with available custom DDC


    Specifications subject to change without notice

    6670 185th Avenue Northeast, Redmond, WA 98052 USA • Tel: 425.869.8400 • Fax: 425.869.8445 • www.alerton.com


    2 of 2 LTBT-VAV-SD Rev. 0004
    © Honeywell International Inc. All rights reserved. Alerton is a registered trademark of Honeywell.

    You might also like