Rubia Tir 7800 15W-40: High-Performance Mineral Lubricant For Diesel and Gasoline Engines

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

RUBIA TIR 7800

15W-40
High-performance mineral lubricant for diesel and gasoline engines.

SPECIFICATIONS AND APPROVALS

International specifications

API CI-4 plus/CI-4/CH-4/SL

Manufacturers’ approvals Meets the requirements of


 Cummins CES 20078  Caterpillar ECF-2
 Mack EO-N  Detroit Diesel DDC Power Guard 93K214
 MAN M 3275
 MB-Approval 228.3
 Volvo VDS-3

APPLICATIONS

TOTAL RUBIA TIR 7800 15W-40 is a high-performance diesel- and gasoline-engine oil formulated to meet the API
CI-4 plus specification.
This lubricant is particularly adapted to vehicles equipped with EGR systems.

TOTAL RUBIA TIR 7800 15W-40 is approved by most manufacturers, such as Cummins, MAN, Mercedes-Benz and
Volvo.

TOTAL RUBIA TIR 7800 15W-40 enables coverage of a fleet of mixed brands (American and European
manufacturers), with a minimal number of products.

PERFORMANCES AND CUSTOMER BENEFITS

TOTAL RUBIA TIR 7800 15W-40 contains excellent viscosity stability in service, ensuring efficient engine
lubrication in severe conditions.

Excellent detergent, antioxidant and anticorrosion additives help to reach extended oil drain intervals defined by
the manufacturer.

TOTAL RUBIA TIR 7800 15W-40 exhibits a high T.B.N. level (11 mgKOH/g) to neutralize acid compounds and
prevent their corrosive attack.

Outstanding detergent, dispersant and anti-wear properties keep the engine clean and enable effective control
of soot, sludge and piston deposits.

TOTAL LUBRIFIANTS TOTAL RUBIA TIR 7800 15W-40


562, avenue du Parc de l’Ile
Update 11/2014
92029 Nanterre cedex
FRANCE www.lubricants.total.com
Page 1 sur 2
PHYSICAL AND CHEMICAL CHARACTERISTICS*

TOTAL RUBIA TIR 7800 15W-40 Method Value


3
Density at 15°C kg/m ASTM D1298 881
2
Kinematic Viscosity at 40°C mm /s ASTM D445 118.2
2
Kinematic Viscosity at 100°C mm /s ASTM D445 15.2
Viscosity Index - ASTM D2270 136
Flash point °C ASTM D92 224
Pour point °C ASTM D97 -33
T.B.N mgKOH/g ASTM D2896 11
Sulphated Ash % m/m ASTM D874 1.1
* The features mentioned above are average values obtained with some variability in production and do not constitute a specification.

RECOMMENDATIONS

Before using the product, it is important to check the service manual of the vehicle: the drain is carried out according
to the manufacturer's requirements.

The product should not be stored at a temperature above 60 °C. Exposure to strong sunlight, extreme cold or high
temperature variations must be avoided.

All packages should be protected from bad weather conditions. The drums should be stored horizontally to avoid a
possible contamination by water and the damage of the product label.

HEALTH, SAFETY AND ENVIRONMENT

Based on available information, this product does not cause adverse health effects when used in the intended
application and the recommendations provided in the Safety Data Sheet (MSDS) are followed. It is accessible on
request from your local dealer or on the website www.quickfds.com

This product should not be used for applications other than those for which it is intended.

If disposing of used product, take care to protect the environment and comply with local regulations.

TOTAL LUBRIFIANTS TOTAL RUBIA TIR 7800 15W-40


562, avenue du Parc de l’Ile
Update 11/2014
92029 Nanterre cedex
FRANCE www.lubricants.total.com
Page 2 sur 2

You might also like