Copyright Shell Group of Companies. No reproduction or networking permitted without license from Shell.

Not for res

DEP 31.38.01.12-Gen Class 252120, rev. H Page 1 of 10

CLASS 252120

This document has been supplied under license by Shell to: Metric units
UOP Honeywell [email protected] 24/01/2018 06:12:12
 DEP 31.38.01.12-Gen Class 252120, rev. H Page 2 of 10

Design limits Branch connections 90 degrees

Temperature (°C) Branch Size

-29 0 100 200 300 400 450 475 500 Run 15 20 25 40 50 80 100 150
Pressure (Barg) size
DN 15- 150 373.9 373.9 343.8 315.2 296.1 276.3 249.7 235.7 174.7 150 C C C C E B B A
100 C C C C B B A
80 C C C C B A
50 C C B B A
Notes 40 C B B A
- Design limits acc. to ASME B16.5 flange rating mat. grp 1.9 and ASME B31.3 allowable internal pressure 25 B B A
- For bending of pipe see DEP 31.38.01.31-Gen. 20 B A
- For basis of design see DEP 31.38.01.10-Gen. 15 A
- Piping class design meets full vacuum at ambient temperature condition
- Welds, attachment welds and cold formed piping parts shall be post-weld heat treated;
see DEP 30.10.60.18-Gen. and DEP 31.38.01.31-Gen.
- This piping class is designed for hydrogen service as defined in DEP 31.38.01.31-Gen. Code Explanation of characters
- Piston type check valves (DN 15-40) [NPS 1/2-1-1/2] for horizontal mounting only A Equal tee
B Reducing tee
C Branch fitting
Table of schedules E Branch outlet

DN Schedule
15 XXS
20 XXS
25 XXS
40 XXS
50 XXS
80 XXS
100 XXS
150 26.0

Alloy steel 1.25Cr-0.5Mo PWHT Plant

Class no. 252120 Consignee
ASME rating CLASS 2500 Engineered by
Corrosion allowance 1 mm Principal
Revision letter H Contr. job no.
Revision date 02/2017 Project no.

This document has been supplied under license by Shell to: Metric units
UOP Honeywell [email protected] 24/01/2018 06:12:12
 DEP 31.38.01.12-Gen Class 252120, rev. H Page 3 of 10

COMPONENT MATERIAL DESCRIPTION

(For full material description see relevant MESC buying description.)

Pipe Valves

PIPE Pipe DN 15-150 ASTM A335-P11 CHVF Check valve flgd DN 15-40 Body: ASTM A182-F11 cl 2/A217-WC6
Trim: AISI 316, Stellite
Flanges CHVF Check valve flgd DN 50-150 Body: ASTM A182-F11 cl 2/A217-WC6
Trim: AISI 321, Stellite
BLFL Blind flange DN 15-150 ASTM A182-F11 cl 2 GAVB Gate valve bw DN 150-150 Body: ASTM A234-WP11
LJFL Lap joint flange --- ASTM A182-F11 cl 2 Trim: AISI 316, Stellite
SBNF Spectacle blind DN 15-150 ASTM A387-11 cl 2 GAVB Gate valve bw DN 20-50 Body: ASTM A182-F11 cl 2
SPNF Spade DN 15-150 ASTM A387-11 cl 2 Trim: AISI 316, Stellite
SRNF Spacer ring DN 15-150 ASTM A387-11 cl 2 GAVB Gate valve bw DN 80-150 Body: ASTM A182-F11 cl 2/A217-WC6
WNFL Welding neck flange DN 15-150 ASTM A182-F11 cl 2 Trim: AISI 316, Stellite
GLVB Globe valve bw DN 15-50 Body: ASTM A182-F11 cl 2
Fittings Trim: AISI 316, Stellite
GLVB Globe valve bw DN 80-100 Body: ASTM A182-F11 cl 2/A217-WC6
CAPB Cap bw DN 15-150 Body: ASTM A234-WP11 Trim: AISI 316, Stellite
Trim: AISI 316, Stellite
E45B Elbow 45 deg LR bw DN 15-150 Body: ASTM A234-WP11 Instruments
Trim: AISI 316, Stellite
TWHD Thermowell flgd DN 50 DN 50-50 AISI 316
Reducing fittings TWHS Thermowell flgd DN 50 L=230 mm --- AISI 316
TWHL Thermowell flgd DN 50 L=255 mm --- AISI 316
BN6B Branch fitting bw DN 40-150 ASTM A182-F11 cl 2
BN6F Branch fitting flgd DN 40-150 ASTM A182-F11 cl 2 Miscellaneous
BNXB Branch fitting bw DN 150-150 ASTM A182-F11 cl 2
BNXF Branch fitting flgd DN 150-150 ASTM A182-F11 cl 2 GKSW Gasket spiral wound DN 15-150 AISI 321, Graphite + anti oxidation inh
BROB Branch outlet bw DN 150-150 ASTM A182-F11 cl 2 CS centring- /SS inner ring
RECB Reducer concentric bw DN 20-150 Body: ASTM A234-WP11 ORFS Orifice flange set DN 50-150 ASTM A182-F11 cl 2
Trim: AISI 316, Stellite STBT Studbolt with nuts --- EN 10269 grade 20CrMoVTiB4-10
REEB Reducer eccentric bw DN 20-150 Body: ASTM A234-WP11

This document has been supplied under license by Shell to: Metric units
UOP Honeywell [email protected] 24/01/2018 06:12:12
 DEP 31.38.01.12-Gen Class 252120, rev. H Page 4 of 10

PIPING COMPONENTS

Nominal pipe size

15 20 25 40 50 80 100 150
Item description MESC

Pipe

Pipe 743311 0 231 311 391 551 631 711 801 911

Flanges

Blind flange 766410 5081 5121 5161 5181 5201 5221 5241 5261
Spacer ring 768910 4581 4621 4661 4681 4701 4721 4741 4761
Spade 768940 2021 2041 2061 2081 2101 2121 2141 2161
Spectacle blind 768970 6581 6621 6661 6681 6701 6721 6741 6761
Welding neck flange 766479 9301 9321 9341 9361 9381 9401 9421 9601

Fittings

Cap bw 763218 0121 0171 0211 0301 0401 0501 0621 0701
Elbow 45 deg LR bw 763238 0121 0171 0211 0301 0401 0501 0621 0701
Elbow 90 deg LR bw 763239 3811 3911 4011 4111 4211 4311 4421 4501
Tee equal bw 763284 0121 0171 0211 0301 0401 0501 0621 0701

Valves

Check valve flgd 771366 2531 2541 2551 2571

Check valve flgd 771367 5581 5601 5621 5641
Gate valve bw 772465 2601 2621 2631
Gate valve bw 772475 0541 0551 0571 0591
Globe valve bw 773465 2601 2621
Globe valve bw 773475 5031 5041 5051 5071 5091

Miscellaneous

Gasket spiral wound 854158 5541 5561 5581 5621 5641 5681 5701 5741
Orifice flange set 766491 9011 9031 9051 9801

This document has been supplied under license by Shell to: Metric units
UOP Honeywell [email protected] 24/01/2018 06:12:12
 DEP 31.38.01.12-Gen Class 252120, rev. H Page 5 of 10

REDUCING/PIPING COMPONENTS

Run x Br RECB REEB TERB Thermowell flgd DN 50

20 x 15 7632680041 7632690041 7632860051 Length (mm) MESC number
25 x 15 7632680141 7632690141 7632860131 230 7683380611
25 x 20 7632680241 7632690241 7632860231 255 7683380621
40 x 15 7632680341 7632690341 305 7683388031
40 x 20 7632680441 7632690441 7632860371 355 7683388041
40 x 25 7632680541 7632690541 7632860461 405 7683388051
50 x 20 7632680701 7632690701 455 7683388061
50 x 25 7632680741 7632690741 7632860651
50 x 40 7632680841 7632690841 7632860731
80 x 40 7632680941 7632690941
80 x 50 7632681041 7632691041 7632860851
100 x 40 7632681241 7632691241
100 x 50 7632681281 7632691281 7632861001
100 x 80 7632681431 7632691431 7632861141
150 x 80 7632681621 7632691621 7632861271
150 x 100 7632681821 7632691821 7632861371

This document has been supplied under license by Shell to: Metric units
UOP Honeywell [email protected] 24/01/2018 06:12:12
 DEP 31.38.01.12-Gen Class 252120, rev. H Page 6 of 10

REDUCING/PIPING COMPONENTS

Comp.name Description
BN6B Branch fitting bw
BN6F Branch fitting flgd
BNXB Branch fitting bw
BNXF Branch fitting flgd
BROB Branch outlet bw
RECB Reducer concentric bw
REEB Reducer eccentric bw
TERB Tee reducing bw

This document has been supplied under license by Shell to: Metric units
UOP Honeywell [email protected] 24/01/2018 06:12:12
 DEP 31.38.01.12-Gen Class 252120, rev. H Page 7 of 10

REDUCING/PIPING COMPONENTS

Branch Run pipe BN6B BNXB BN6F BNXF BROB

15 40 - 50 7672523711 7672129001
15 80 - 100 7672523721 7672129011
15 150 - 150 7672527081 7672127101
20 50 - 50 7672523751 7672129041
20 80 - 150 7672523761 7672129051
25 80 - 150 7672523801 7672129081
40 80 - 80 7672523851 7672129111
40 100 - 100 7672523861 7672129121
40 150 - 150 7672527281 7672127301
50 150 - 150 7679274971

This document has been supplied under license by Shell to: Metric units
UOP Honeywell [email protected] 24/01/2018 06:12:12
 DEP 31.38.01.12-Gen Class 252120, rev. H Page 8 of 10

REDUCING/PIPING COMPONENTS

This document has been supplied under license by Shell to: Metric units
UOP Honeywell [email protected] 24/01/2018 06:12:12
 DEP 31.38.01.12-Gen Class 252120, rev. H Page 9 of 10

BOLTING

Std boltset stand flg [h]

DN nr inch x mm MESC number
15 4 3/4 x 130 8138301471
20 4 3/4 x 130 8138301471
25 4 7/8 x 140 8138302201
40 4 1 1/8 x 180 8138303901
50 8 1 x 180 8138303071
80 8 1 1/4 x 230 8138304801
100 8 1 1/2 x 300 8138306431
150 8 2 x 400 8138309011

Std boltset orificeflg[h]

DN nr inch x mm MESC number
50 8 1 x 190 8138303091
80 8 1 1/4 x 240 8138304821
100 8 1 1/2 x 310 8138306451
150 8 2 x 410 8138309031

Std boltset blind/spc [h]

DN nr inch x mm MESC number
15 4 3/4 x 150 8138301511
20 4 3/4 x 150 8138301511
25 4 7/8 x 160 8138302241
40 4 1 1/8 x 190 8138303921
50 8 1 x 200 8138303111
80 8 1 1/4 x 260 8138304861
100 8 1 1/2 x 390 8138306611
150 8 2 x 520 8138313581

This document has been supplied under license by Shell to: Metric units
UOP Honeywell [email protected] 24/01/2018 06:12:12
 DEP 31.38.01.12-Gen Class 252120, rev. H Page 10 of 10

ASSEMBLIES

Drain or vent point DN 15 Fig.I DN15 - 15 Temp instr conn DN 50 Fig.HS DN80 - 100
Branch: according to branch table Branch: according to branch table
Blind flange 1 7664105081 Lap joint flange 1 7664203201
Welding neck flange 1 7664799301 Pipe 1 7433110631
Gasket spiral wound 1 8541585541 Welding neck flange 1 7664799381
Studbolt with nuts 4 8138301471 Gasket spiral wound 1 8541585641
Thermowell flgd DN 50 L=230 mm 1 7683380611
Drain or vent point DN 20 Fig.I DN20 - 40 Studbolt with nuts 8 8138303111
Branch: according to branch table
Blind flange 1 7664105121
Welding neck flange 1 7664799321
Gasket spiral wound 1 8541585561
Studbolt with nuts 4 8138301471

Drain or vent point DN 20 Fig.H DN50 - 50

Branch: branch nipple flanged
Blind flange 1 7664105121
Gasket spiral wound 1 8541585561
Studbolt with nuts 4 8138301471

Drain or vent point DN 25 Fig.H DN80 - 150

Branch: branch nipple flanged
Blind flange 1 7664105161
Gasket spiral wound 1 8541585581
Studbolt with nuts 4 8138302201

Pressure instr conn DN 15 Fig.0U DN15 - 15

Branch: according to branch table
Lap joint flange 1 7664203081
Pipe 1 7433110231
Welding neck flange 1 7664799301
Gasket spiral wound 1 8541585541
Studbolt with nuts 4 8138301471

Pressure instr conn DN 20 Fig.0U DN20 - 150

Branch: according to branch table
Gate valve bw 2 7724750541
Lap joint flange 1 7664203091
Pipe 1 7433110311
Welding neck flange 1 7664799321
Gasket spiral wound 1 8541585561

Temp instr conn DN 50 Fig.HL DN150 - 150

Branch: according to branch table
Lap joint flange 1 7664203201
Pipe 1 7433110631
Welding neck flange 1 7664799381
Gasket spiral wound 1 8541585641
Thermowell flgd DN 50 L=255 mm 1 7683380621
Studbolt with nuts 8 8138303111

This document has been supplied under license by Shell to: Metric units
UOP Honeywell [email protected] 24/01/2018 06:12:12