Scribd
Upload
111 views2 pages

Insulator Types & Uses Insulator Set Type: Appendix 9.A1

This document contains information about insulator types and their uses for a 33kV system. It provides details on insulator unit type, coupling type, security clips, and withstand voltages for different insulator set types including suspension, tension, and jumper configurations. Mechanical and electrical characteristics are also listed such as pollution category, insulator string length, power arc withstand levels, and failing loads.

Uploaded by

Shahriar Ahmed
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
111 views2 pages

Insulator Types & Uses Insulator Set Type: Appendix 9.A1

This document contains information about insulator types and their uses for a 33kV system. It provides details on insulator unit type, coupling type, security clips, and withstand voltages for different insulator set types including suspension, tension, and jumper configurations. Mechanical and electrical characteristics are also listed such as pollution category, insulator string length, power arc withstand levels, and failing loads.

Uploaded by

Shahriar Ahmed
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

APPENDIX 9.

A1

INSULATOR TYPES & USES

Insulator Set Type Suspension/ Tension Low Duty Jumper


Heavy Suspension
suspension
Nominal System Voltage {……………………..33 kV……………………….}
String Configuration Single Single Single Single
Reference Drawing
Insulator Unit type {…………………….Cap & Pin……………………..}
Coupling Type {……………………Ball & Socket………………….}
Security Clip type {………………………….R ……………………..}
Zinc Sleeve {…………………….Required……………………..}
Glaze Colour Brown Gray
Unit Puncture Voltage (KV) 110 125
Dry Lighting Impulse 70 75
Withstand Voltage (KV)
Wet power frequency 40 45
Withstand Voltage (KV)
Electro-mechanical failing 70 210
load (KN)

287
DNE(E)-RT-28
APPENDIX 9.A2/1

ELECTRICAL & MECHANICAL CHARACTERISTICS (33KV)

INSULATOR SETS – TYPES & USES

Insulator Set Type Suspension/Jumper Tension


Pollution Category {…………….Medium II………………}

Number of Insulator Units per 4 3


string
Dielectric material (Porcelain)

Nominal Insulator String mm 950 1500


Length
Dry Lighting Impulse KV (---------170---------)
Withstand voltage
Wet power frequency KV (-----------70--------)
Withstand voltage
Power Arc for insulator set KA (-----------31.5-----------)
-Current s (------------0.5-----------)
-Duration
Power arc for string insulator
units :
-Current for duration kA for (-------------12 for 0.1 or 6 for 0.2 -----------)
sec
Electromechanical failing load Kn 70 210

APPENDIX 9.A3

TYPE TEST - POLLUTION IEC 507

Salt Solution Salinity Not Required

288
DNE(E)-RT-28

You might also like