AOT Safety Clamps Type C

AOT TYPE “C” SAFETY CLAMP
The AOT Type “C” Safety Clamp is one of the most valuable tools on the Rig Floor. It helps guard against dropping flush-joint pipe, streamlined
drill collars, etc. into the hole while making-up or breaking-out the string. These clamps are ideal as an emergency elevator shoulder for lifting
prepacked gravel liners, flush-joint pipe, twisted-off fish and similar items which have no shoulders for attaching conventional elevators. The
Type “C” Safety Clamp can be used as a “Slip and Elevator” combination when running large diameter surface casing or used for simplified
handling of drilling risers and casing heads during installation. Literally, it has dozens of money and time-saving applications in oilfield work,
in addition to giving increased protection against fishing jobs.
The Safety Clamp consists of individual links, flexibly hinged together. Each link has a separate tapered slip which acts as a gripping member,
much like a tapered rotary slip, and each slip is held in a retracted position on the taper by spring tension. When the clamp is tightened, each
small slip takes a firm initial grip on the surface of the pipe. Should the pipe start to fall, or should load increase occur against the slips, the
taper mounting causes each slip to wedge tighter against the surface of the pipe to increase the grip or lock the pipe against further
movement.
Gripping pressure is always uniform around the pipe so there is little danger of crushing thin-walled pipe or damaging the pipe surface. And,
since each link, complete with tapered slip, is interchangeable as a unit, the Safety Clamp is readily adaptable to virtually any diameter. Each
link changes the effective gripping diameter of the clamp one inch. All parts are made of alloy steel, heat-treated for strength and gripping
ability.
CLAMPS WITH HANDLES & WRENCH

TYPE “CR” (SINGLE SCREW)
AOT # RANGE O.D. SIZE REFERENCE LINKS REQUIRED WT.
12-127 3 3/4” - 4 5/8” 7624-5103 7 46.00
12-128 4 1/2” - 5 5/8” 7624-5104 8 55.00
12-129 5 1/2” - 6 5/8” 7624-5105 9 60.00
12-130 6 1/2” - 7 5/8” 7624-5105 10 64.00
12-131 7 1/2” - 8 5/8” 7624-5105 11 69.00
12-132 8 1/2” - 9 5/8” 7624-5105 12 73.00
12-133 9 1/2” - 10 5/8” 7624-5105 13 78.00
TYPE “CL” (SINGLE SCREW)

12-134 10 1/2” - 11 5/8” 7624-5103 14 82.00
12-135 11 1/2” - 12 5/8” 7624-5104 15 87.00
12-136 12 1/2” - 13 5/8” 7624-5105 16 91.00
12-137 13 1/2” - 14 5/8” 7624-5105 17 115.00
12-138 14 1/2” - 15 5/8” 7624-5105 18 119.00
TYPE “C X L” (DOUBLE SCREW)

12-145 15 1/2” - 17” 7624-5103 18 121.00
12-146 16 1/2” - 18” 7624-5104 19 125.00
12-147 17 1/2” - 19” 7624-5105 20 129.00
12-148 18 1/2” - 20” 7624-5105 21 134.00
ADD - “B” TO END OF PART NUMBER TO INCLUDE BOX
rev 805 53
www.accessoiltools.com
CLAMPS WITH LIFTING CLEVIS
TYPE “CL” (SINGLE SCREW)
AOT # RANGE O.D. SIZE REFERENCE # LINKS REQUIRED WT.
12-150 10 1/2” - 11 5/8” 7624-5103 14 85.00
12-151 11 1/2” - 12 5/8” 7624-5104 15 89.00
12-152 12 1/2” - 13 5/8” 7624-5105 16 94.00
12-153 13 1/2” - 14 5/8” 7624-5105 17 99.00
12-154 14 1/2” - 15 5/8” 7624-5105 18 104.00
TYPE “C X L” (DOUBLE SCREW)
12-155 15 1/2” - 17” 7624-5103 18 36.00
12-156 16 1/2” - 18” 7624-5104 19 40.00
12-157 17 1/2” - 19” 7624-5105 20 44.00
12-158 18 1/2” - 20” 7624-5105 21 44.00
12-159 19 1/2” - 21” 7624-5105 22 44.00
12-160 21 1/8” - 23” 7624-5103 24 36.00
12-161 24 1/8” - 26” 7624-5104 27 40.00
12-162 29 1/2” - 31” 7624-5105 32 44.00
12-163 35 1/2” - 37” 7624-5105 38 44.00
12-164 41 1/2” - 47” 7624-5105 44 44.00
ADD -B TO END OF PART # TO INCLUDE BOX
REPLACEMENT PARTS FOR TYPE “C” SAFETY CLAMP
AOT # ITEM DESCRIPTION REFERENCE # ** SPARES WT.

12-101 1 LINK ASSY. COMPLETE 7624-A-7 5.00
12-102 2 LINK INTERMEDIATE 7624-A-1 6 3.75
12-103 3 INSERT w/COTTER 7624-A-4 1 SET 1.12
12-104 5 COTTER f/INSERT 900620-65 .06
12-105 4 SPRING f/INSERT 7624-E-5 1 SET .06
11-106 6 LINK PIN w/COTTER 7624-C-5 6 .75
11-107 7 COTTER f/LINK PIN 900620-36 .06
11-108 8 END LINK (SCREW) 7624-A-3 4.50
11-109 9 END LINK (PIVOT BLOCK) 7624-A-24 3.50
11-110 10 END LINK PIN w/CHAIN 7624-F-5 1 1.25
11-111 11 SCREW 7624-A-5 4.00
11-112 12 NUT 7624-B-5 1.50
11-113 13 PIVOT BLOCK 7624-A-5000 1.50
11-114 14 PIVOT BLOCK PIN 7624-D-5 .25
11-115 15 NUT WRENCH 7624-A-25 4.00
11-116 16 HANDLE (CAST STEEL) 7624-A-6 3.00
11-117 17 HANDLE LINK PIN w/COTTER 7624-G-5 .75
11-118 18 HANDLE KIT 7624-A-5135 4.00
11-119 19 PIVOT BLOCK PIN WRENCH 900533-12 .25
11-120 SAFETY CLAMP BOX 7624-A-9 45.00
12-119 LIFTING CLEVIS COMPLETE 7624-29 15.00
12-120 21 LIFTING CLEVIS ONLY 7624-A-29 9.00
12-121 21 CLEVIS PIN & NUT 7624-A-30 2.50
ALL PARTS ARE INTERCHANGEABLE WITH BAASH-ROSS® TYPE “C” SAFETY CLAMPS
** RECOMMENDED SPARE PARTS FOR 1 YEARS SERVICE
rev 805 54 www.accessoiltools.com

AOT Safety Clamps Type C

Uploaded by

Copyright:

Available Formats

AOT Safety Clamps Type C

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

AOT Safety Clamps Type C

Uploaded by

Copyright:

Available Formats

AOT TYPE “C” SAFETY CLAMP

CLAMPS WITH HANDLES & WRENCH

TYPE “CL” (SINGLE SCREW)

TYPE “C X L” (DOUBLE SCREW)

REPLACEMENT PARTS FOR TYPE “C” SAFETY CLAMP

AOT # ITEM DESCRIPTION REFERENCE # ** SPARES WT.

rev 805 54 www.accessoiltools.com

You might also like