Scribd
Upload
468 views6 pages

Learnvern Pvt. LTD.: A Report On Industrial Training at

This report summarizes a 6-week industrial training completed by Ghanshyam Regar at Learnvern Pvt. Ltd. It includes an introduction to the company and overview of Autodesk and CREO software. The bulk of the report focuses on solid modeling techniques used at Learnvern like 2D sketching, defining sketch relations, creating features, and assembly modeling. The report concludes with a bibliography citing sources used to complete the training.

Uploaded by

ABHISHEK
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
468 views6 pages

Learnvern Pvt. LTD.: A Report On Industrial Training at

This report summarizes a 6-week industrial training completed by Ghanshyam Regar at Learnvern Pvt. Ltd. It includes an introduction to the company and overview of Autodesk and CREO software. The bulk of the report focuses on solid modeling techniques used at Learnvern like 2D sketching, defining sketch relations, creating features, and assembly modeling. The report concludes with a bibliography citing sources used to complete the training.

Uploaded by

ABHISHEK
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

A REPORT

On
INDUSTRIAL TRAINING
At
LEARNVERN PVT. LTD.
SUBMITTED IN PARTIAL FULFILMENT OF THE REQUIREMENT FOR THE.
AWARD OF THE DEGREE OF

BACHELOR OF TECHNOLOGY
(Mechanical Engineering)

2019-2020
SUBMITTED BY:
NAME: GHANSHYAM REGAR
UNIVERSITY ROLL NO: 17EMBME0016

SUBMITTED TO:
MR. ARUN GOYAL

DEPARETMENT OF MECHANICAL ENGINEERING

M.L.V TEXTILE & ENGINEERING COLLEGE, BHILWARA


(An Autonomous Engineering College of Government of Rajasthan)
CANDIDATE’S DECLARATION

I am GHANSHYAM REGAR hereby declare that I have undertaken six weeks industrial

training at LEARNVERN PVT. LTD during a period from MAY 01 TO JUNE 15,

2020 in partial fulfilment of requirements for the award of degree of B.TECH (Mechanical

Engineering ) at M.L.V. TEXTILE & ENGINEERIING COLLEGE, BHILWARA the work

which is being presented in the training report submitted to department of mechanical

engineering at M.L.V. TEXTILE & ENGINNERING COLLEGE, BHILWARA is an

authentic record of training work.

SIGNATURE OF THE STUDENT

The six weeks industrial training viva- voice examination of …………………………has been

held on………………………and accepted.

Signature of Examiner
ACKNOWLEDGEMENT

It was highly educative and interactive to take training at LEARNVERN PVT. LTD,

PLATEFORM as technical knowledge is incomplete without the practical knowledge, I

couldn’t find any place better than this to update myself.

I am highly grateful to our Head of Department MR. AJIT KUMAR JOSHI and MR. ARUN

GOYAL to grant me permission to take training at such a coveted institute. Apart from him,

there was always a friendly guidance from Educators for the betterment of this Training

Report.

I am also thankful to all those engineers and trainers without whom it was not possible form

to clear my doubts and difficulties.

After coming to this institute and knowing State of Art Technology available with learned

Training staff, I would like to come again to this coveted institute if got a chance.

GHANSHYAM REGAR

FINAL YEAR (ME)

7TH SEM

17EMBME016
ABSTRACT

This report has been given by the author to convey the information about different sections

of LEARNVERN. Different specifications, prospective and processing in each section while

solid modeling, is being discussed in the most convenient manner for the readers. We have

tried to enhance history, literature, survey and importance of the Modeling before

manufacturing. Also schematic figures are shown in each section to discover a better

understanding. Proper statistics and parameters of all the major equipment are also presented

to make a better analysis of the project in comparison to other major solid modeling

drawings.
FRONT PAGES

S.NO. TOPIC PAGE NO.

1. Front Pages 1-4

CONTENTS
S.NO. TOPIC PAGE NO.

1. INTRODUCTION TO COMPANY 1-2

2. AUTODESK, PTC 3-6

2.1 INTRODUCTION 3

2.2 VISION 4

2.3 HISTORY 5

2.4 PRODUCTS 5

3. AUTOCAD, CREO 7-8

3.1 INTRODUCTION 7

3.2 HISTORY 8

4. SOLID MODELING 9-30

4.1 THE MODEL 9

4.2 USER INTERFACE 10

4.3 2D SKETCHING 12

4.4 STATUS OF A SKETCH 14

4.5 SKETCH RELATIONS 15

4.6 VIEW ORIENTATION 20

4.7 VIEW DISPLAY STYLE 20

4.8 CREATING FEATURES 20

4.9 ASSEMBLY MODELING 29

5. CONCLUSION 31-32

6. BIBLIYOGRAPHY 32

You might also like