DumpsKing
http://www.dumpsking.com
Latest exam dumps & reliable dumps VCE & valid certification king
Instant Download - Best Exam Practice Material - 100% Money Back Guarantee!
IT Certification Guaranteed, The Easy Way!
Exam : 70-743
Title : Upgrading Your Skills to
MCSA: Windows Server 2016
Vendor : Microsoft
Version : DEMO
1 from Dumpsking.com.
Get Latest & Valid 70-743 Exam's Question and Answers 1
http://www.dumpsking.com/70-743-testking-dumps.html
Instant Download - Best Exam Practice Material - 100% Money Back Guarantee!
IT Certification Guaranteed, The Easy Way!
NO.1 You are implementing a new network. The network contains a DHCP server named DHCP1 that
runs Windows Server 2016. DHCP1 contains a scope named Scope1 for the 192.168.0/24 subnet.
Your company has the following policy for allocating IP addresses:
* All server addresses must be excluded from DHCP scopes.
* All client computer must receive IP addresses from Scope1.
* All Windows servers must have IP addresses in the range of 192.168.0.200 to 192.168.0.240
* All other network devices must have IP addresses in the range of 192.168.0.180 to 192.168.0.199.
You deploy a print device named Print1.
You need to ensure that Print1 adheres to the policy for allocating IP addresses.
Which command should you use?
A. Add-DhcpServerv4Lease
B. Add-DhcpServerv4Filter
C. Add-DhcpServerv4ExclusionRange
D. Add-DhcpServerv4Reservation
Answer: C
NO.2 Your network contains an Active Directory domain named contoso.com. The domain contains a
DNS server named Server1. All client computers run Windows 10.
On Server1, you have the following zone configuration
You need to prevent Server1 from resolving queries from DNS clients located on Subnet4.
Server1 must resolve queries from all other DNS clients.
Solution: From Windows PowerShell on Server1, you run the Export-DnsServerDnsSecPublicKey
cmdlet.
Does this meet the goal?
A. Yes
B. No
Answer: B
NO.3 Note: This question is part of a series of questions that use the same or similar answer choices.
An answer choice may be correct for more than one question in the series. Each question is
independent of the other questions in this series. Information and details provided in a question
apply only to that question.
2 from Dumpsking.com.
Get Latest & Valid 70-743 Exam's Question and Answers 2
http://www.dumpsking.com/70-743-testking-dumps.html
Instant Download - Best Exam Practice Material - 100% Money Back Guarantee!
IT Certification Guaranteed, The Easy Way!
You have two servers named Server1 and Server2 that run Windows Server 2016. Server1 and
Server2 have the Hyper-V server role installed.
An iSCSI SAN connects to the network.
You create a LUN on the SAN and configure both servers to connect to the iSCSI target.
You create a failover cluster and add Server1 and Server2 to the cluster. You connect both servers to
the iSCSI target and format the shared storage.
You need to add the shared storage to the cluster. The solution must ensure that virtual machines
running on both nodes can access the shared storage simultaneously.
Which tool should you use?
A. the Server Manager app
B. the clussvc.exe command
C. the Computer Management snap-in
D. the cluster.exe command
E. the Hyper-V Manager snap-in
F. the Failover Cluster Manager snap-in
G. the Disk Management snap-in
H. the configurehyperv.exe command
Answer: F
Explanation
References:
https://technet.microsoft.com/en-us/library/jj612868(v=ws.11).aspx
https://technet.microsoft.com/en-us/library/jj863389.aspx
To implement certain scenarios for clustered virtual machines, the virtual machine storage and virtual
hard disk file should be configured as Cluster Shared Volumes (CSV). To configure a disk in clustered
storage as a CSV volume, you can use Failover Cluster Manager or the Windows PowerShellAdd-
ClusterSharedVolume cmdlet. For detailed planning considerations and steps to create CSV, see Use
Cluster Shared Volumes in a Windows Server 2012 Failover Cluster.
NO.4 Your network contains an Active Directory domain named contoso.com. The domain contains
two servers named Server1 and Server2 that run Windows Server 2016.
Server1 has IP Address Management (IPAM) installed. Server2 has the DHCP Server role installed. The
IPAM server retrieves data from Server2.
The domain has two users named User1 and User2 and a group named Group1. User1 is the only
member of Group1.
Server1 has one IPAM access policy. You edit the access policy as shown in the Policy exhibit. (Click
the Exhibit button.)
3 from Dumpsking.com.
Get Latest & Valid 70-743 Exam's Question and Answers 3
http://www.dumpsking.com/70-743-testking-dumps.html
Instant Download - Best Exam Practice Material - 100% Money Back Guarantee!
IT Certification Guaranteed, The Easy Way!
The DHCP scopes are configured as shown in the Scopes exhibit. (Click the Exhibit button.)
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
4 from Dumpsking.com.
Get Latest & Valid 70-743 Exam's Question and Answers 4
http://www.dumpsking.com/70-743-testking-dumps.html
Instant Download - Best Exam Practice Material - 100% Money Back Guarantee!
IT Certification Guaranteed, The Easy Way!
Answer:
NO.5 Note: This question is part of a series of questions that present the same scenario. Each
question in the series contains a unique solution that might meet the stated goals. Some question
sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these
questions will not appear in the review screen.
5 from Dumpsking.com.
Get Latest & Valid 70-743 Exam's Question and Answers 5
http://www.dumpsking.com/70-743-testking-dumps.html
Instant Download - Best Exam Practice Material - 100% Money Back Guarantee!
IT Certification Guaranteed, The Easy Way!
You have a Hyper-V host named Server1 that hosts a virtual machine named VM1. Server1 and VM1
run Windows Server 2016.
The settings for VM1 are configured as shown in the exhibit below.
You need to ensure that you can use the Copy-VMFile cmdlet on Server1 to copy files from VM1.
Solution: You need to enable the Guest Service integration service for VM1.
Does this meet the goal?
A. YES
B. NO
Answer: A
NO.6 You have a DNS server named Server1.
The forwarders are configured as shown in the Forwarders exhibit. (Click the Exhibit button.)
6 from Dumpsking.com.
Get Latest & Valid 70-743 Exam's Question and Answers 6
http://www.dumpsking.com/70-743-testking-dumps.html
Instant Download - Best Exam Practice Material - 100% Money Back Guarantee!
IT Certification Guaranteed, The Easy Way!
The Advanced Settings are configured as shown in the Advanced exhibit. (Click the Exhibit button.)
7 from Dumpsking.com.
Get Latest & Valid 70-743 Exam's Question and Answers 7
http://www.dumpsking.com/70-743-testking-dumps.html
Instant Download - Best Exam Practice Material - 100% Money Back Guarantee!
IT Certification Guaranteed, The Easy Way!
The Root Hints are configured as shown in the Root Hints exhibit. (Click the Exhibit button.)
8 from Dumpsking.com.
Get Latest & Valid 70-743 Exam's Question and Answers 8
http://www.dumpsking.com/70-743-testking-dumps.html
Instant Download - Best Exam Practice Material - 100% Money Back Guarantee!
IT Certification Guaranteed, The Easy Way!
Server1 does not contain any DNS zones.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
Answer:
9 from Dumpsking.com.
Get Latest & Valid 70-743 Exam's Question and Answers 9
http://www.dumpsking.com/70-743-testking-dumps.html
Instant Download - Best Exam Practice Material - 100% Money Back Guarantee!
IT Certification Guaranteed, The Easy Way!
Explanation
Recursion is disabled so internet hosts cannot be resolved.
The recursive test fails because recursion is disabled.
Server1 is not configured as a root server. The forwarders list would be greyed out if it was.
NO.7 You have a server named Server1 that runs Windows Server 2016. Server1 has the Web
Application Proxy role service installed.
You plan to deploy Remote Desktop Gateway (RD Gateway) services. Clients will connect to the RD
Gateway services by using various types of devices including Windows, iOS and Android devices.
You need to publish the RD Gateway services through the Web Application Proxy.
Which command should you run? To answer, select the appropriate options in the answer area.
10 from Dumpsking.com.
Get Latest & Valid 70-743 Exam's Question and Answers 10
http://www.dumpsking.com/70-743-testking-dumps.html
Instant Download - Best Exam Practice Material - 100% Money Back Guarantee!
IT Certification Guaranteed, The Easy Way!
Answer:
Explanation
https://docs.microsoft.com/en-sg/windows-server/remote/remote-access/web-application-
proxy/publishing-applic
NO.8 You create a Storage Spaces Direct hyper-converged failover cluster. The duster contains three
nodes and a
1-TB Storage Spaces Direct volume.
The cluster will store virtual machines.
You plan to extend the volume by adding an additional 3 TB.
What is the minimum amount of extra disk capacity required to accommodate extending the
volume?
A. 3 TB on the coordinator node
B. 3 TB per node
C. 4 TB per node
D. 4 TB on the coordinator node
Answer: A
NO.9 Your network contains an Active Directory domain named contoso.com. The domain contains
three servers named Server1, Server2, and Server3 that run Windows Server 2016.
Server1 has IP Address Management (IPAM) installed. Server2 and Server3 have the DHCP Server role
installed and have several DHCP scopes configured. The IPAM server retrieves data from Server2 and
Server3.
A domain user named User1 is a member of the groups shown in the following table.
11 from Dumpsking.com.
Get Latest & Valid 70-743 Exam's Question and Answers 11
http://www.dumpsking.com/70-743-testking-dumps.html
Instant Download - Best Exam Practice Material - 100% Money Back Guarantee!
IT Certification Guaranteed, The Easy Way!
On Server1, you create a security policy for User1. The policy grants the IPAM DHCP Scope
Administrator Role with the \Global access scope to the user.
Which actions can User1 perform? To answer, select the appropriate options in the answer area.
Answer:
Explanation
12 from Dumpsking.com.
Get Latest & Valid 70-743 Exam's Question and Answers 12
http://www.dumpsking.com/70-743-testking-dumps.html
Instant Download - Best Exam Practice Material - 100% Money Back Guarantee!
IT Certification Guaranteed, The Easy Way!
User1 is using Server Manager, not IPAM to perform the administration. Therefore, only the "DHCP
Administrators" permission on Server2 and the "DHCP Users" permissions on Server3 are applied.
The permissions granted through membership of the "IPAM DHCP Scope Administrator Role" are not
applied when the user is not using the IPAM console.
NO.10 Note: This question is part of a series of questions that use the same or similar answer
choices. An answer choice may be correct for more than one question in the series. Each question is
independent of the other questions in this series. Information and details provided in a question
apply only to that question.
You have a Hyper-V host named Server1 that runs Windows Server 2016.
Server1 has a virtual machine named VM1 that uses a single VHDX file.
VM1 is configured shown in the following table:
You plan to use VM1 as a virtual Machine Template to deploy shielded virtual machines.
You need to ensure that VM1 can be used to deploy shielded virtual machines.
What should you run?
A. the Set-VMHost cmdlet
B. the Install-WindowsFeature cmdlet
C. the Set-VMProcessor cmdlet
D. the Set-VHD cmdlet
E. the Diskpart command
F. the Optimize-VHD cmdlet
G. the Set-VM cmdlet
H. the Mount-VHD cmdlet
13 from Dumpsking.com.
Get Latest & Valid 70-743 Exam's Question and Answers 13
http://www.dumpsking.com/70-743-testking-dumps.html
Instant Download - Best Exam Practice Material - 100% Money Back Guarantee!
IT Certification Guaranteed, The Easy Way!
Answer: E
NO.11 Your network contains an Active Directory domain named contoso.com. The domain contains
a member server named Server1 that runs Windows Server 2016.
Server1 has IP Address Management (IPAM) installed. IPAM uses a Windows Internal Database.
You install Microsoft SQL Server on Server1.
You plan to move the IPAM database to SQL Server.
You need to create a SQL Server login for the IPAM service account.
For which user should you create the login? To answer, select the appropriate options in the answer
area.
Answer:
Explanation
References:
https://blogs.technet.microsoft.com/yagmurs/2014/07/31/moving-ipam-database-from-windows-
internal-databas
14 from Dumpsking.com.
Get Latest & Valid 70-743 Exam's Question and Answers 14
http://www.dumpsking.com/70-743-testking-dumps.html
Instant Download - Best Exam Practice Material - 100% Money Back Guarantee!
IT Certification Guaranteed, The Easy Way!
NO.12 Your network contains an Active Directory domain named contoso.com. The domain contains
a server named Server1 that runs Windows Server 2016.
You install IP Address Management (IPAM) on Server1. You select the automatic provisioning
method, and then you specify a prefix of IPAM1.
You need to configure the environment for automatic IPAM provisioning.
Which cmdlet should you run? To answer, select the appropriate options in the answer area.
Answer:
Explanation
Invoke-IpamGpoProvisioning -Domain contoso.com -GpoPrefixName IPAM -IpamServerFqdn
dc1.contoso.com
NO.13 Your network contains an Active Directory forest named contoso.com.
You need to add a new domain named fabrikam.com to the forest.
What command should you run? To answer, select the appropriate options in the answer area.
Answer:
15 from Dumpsking.com.
Get Latest & Valid 70-743 Exam's Question and Answers 15
http://www.dumpsking.com/70-743-testking-dumps.html
Instant Download - Best Exam Practice Material - 100% Money Back Guarantee!
IT Certification Guaranteed, The Easy Way!
Explanation
References:
https://technet.microsoft.com/en-us/library/hh974722(v=wps.630).aspx
NO.14 You have two Hyper-V hosts named Server1 and Server2 that run Windows Server 2016. The
hosts are nodes in failover cluster.
You have a virtual machine named VM1. VM1 connects to a virtual switch named vSwitch1.
You discover that VM1 automatically live migrates when vSwitch temporarily disconnects.
You need to prevent VM1 from being live migrated when vSwitch1 temporarily disconnects.
What should you do?
A. From the network adapter setting of VM1, disable the Heartbeat integration service.
B. Run the Set-VMNetworkAdapter cmdlet and set StormLimit to 0.
C. From the network adapter setting of VM1, disable the Protected network setting.
D. Run the Set-VMNetworkAdapter cmdlet and set IsmanagementOS to False.
Answer: C
NO.15 You have a server named Server1 that runs Windows Server 2016. Server1 is located on the
perimeter network, and only inbound TCP port 443 is allowed to connect Server1 from the Internet.
You install the Remote Access server role on Server1.
You need to configure Server1 to accept VPN connections over port 443.
Which VPN protocol should you use?
A. PPTP
B. L2TP
C. SSTP
D. lKEv2
Answer: C
Explanation
16 from Dumpsking.com.
Get Latest & Valid 70-743 Exam's Question and Answers 16
http://www.dumpsking.com/70-743-testking-dumps.html
Instant Download - Best Exam Practice Material - 100% Money Back Guarantee!
IT Certification Guaranteed, The Easy Way!
References:
https://www.thomasmaurer.ch/2016/10/how-to-install-vpn-on-windows-server-2016/
https://www.lukasberan.com/2016/12/how-to-configure-sstp-vpn-on-windows-server/
17 from Dumpsking.com.
Get Latest & Valid 70-743 Exam's Question and Answers 17
http://www.dumpsking.com/70-743-testking-dumps.html
