0% found this document useful (0 votes)
73 views2 pages

Wireless Communication (ECE - 405)

This document contains instructions and questions for a 7th semester B.Tech. wireless communications exam. It includes 10 questions across 2 sections related to topics like optimal power allocation, channel scattering functions, receiver diversity techniques, modulation schemes for Rayleigh fading channels, MIMO schemes like Alamouti coding, multipath channel models, and path loss models. Students must answer any 5 of the 10 questions.

Uploaded by

viswateja
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
73 views2 pages

Wireless Communication (ECE - 405)

This document contains instructions and questions for a 7th semester B.Tech. wireless communications exam. It includes 10 questions across 2 sections related to topics like optimal power allocation, channel scattering functions, receiver diversity techniques, modulation schemes for Rayleigh fading channels, MIMO schemes like Alamouti coding, multipath channel models, and path loss models. Students must answer any 5 of the 10 questions.

Uploaded by

viswateja
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Reg. No.

SEVENTH SEMESTER B.Tech. (E & C) DEGREE END SEMESTER EXAMINATION


NOV 2017
SUBJECT: WIRELESS COMMUNICATION (ECE - 405)

TIME: 3 HOURS MAX. MARKS: 50


Instructions to candidates
 Answer ANY FIVE questions.
 Missing data may be suitably assumed.

1A. Derive an expression for optimal power allocation and Shannon capacity of a block fading channel.
1B. Measurements through a 900 MHz sinusoidal input to a channel resulted in the following channel
scattering function; S(τ, ρ) is α1δ(τ) at ρ = 70 Hz and α2 δ(τ-0.022 μs) at ρ = 49.5 Hz. If the
transmitter and receiver are located 800 cm above the ground, (i) Estimate the velocity and distance
between the transmitter and receiver. (ii) By what factor the path loss is varying with distance‘d’
(iii) will a 30 KHz voice signal transmitted over this channel experience frequency selective or flat
fading.
(6+4)

2A. Briefly explain all types of receiver diversity techniques.


2B. For a cellular system the reference distance for the antenna far field is 100 m and the path-loss
exponent is a random variable taking on values 2, 2.5, 3 and 4 with probabilities 0.4, 0.3, 0.2 and
0.1 respectively. Assume a receiver at a distance of 1000 m from the transmitter with average
transmit power constraint of 100 mW and a receiver noise power of 1mW. (i) Assuming that both
transmitter and receiver have CSI, find the distribution of the received SNR (ii) Assuming only
receiver CSI, determine the ergodic capacity per unit bandwidth for this channel (iii) Assuming both
receiver and transmitter CSI, derive the optimal power adaptation policy for this channel and its
corresponding Shannon capacity per unit bandwidth (iv) Assuming both receiver and transmitter
CSI, determine the zero outage capacity per unit bandwidth of this channel.
(4+6)

3A. For a Rayleigh fading wireless channel, derive an expression for outage probability and average
probability of error for BPSK and BFSK modulation
3B. Consider a communication system, with transmitter and Receiver placed 10 m apart, is operating at
1 GHz and has a Time varying channel impulse response with N resolvable multipath components.
Show that the minimum value of the product of carrier frequency and nth delay time is very much
larger than unity. Is it true if the distance is changed to 1 m and 100 m?
(7+3)

ECE –405 Page 1 of 2


4A. With relevant diagrams, explain the Alamouti scheme of transmitter diversity in the absence of CSI
at transmitter.
4B. Show that for a narrowband fading channel the autocorrelation of in-phase and quadrature
components of received signal is same and WSS.
(4+6)

5A. Derive an expression for path gain for 2-ray model. Show the power variations with respect to
distance between antennas. Also, derive an approximate expression for the distance values below
the critical distance at which nulls occur.
5B. Consider an indoor wireless LAN with fc = 1 GHz, cells of radius 100 m, and omnidirectional
antennas. For free space path loss model, what should be the transmitted power if all receivers
within the cell are to receive a minimum power of -40 dBm? Repeat your calculation for 500 m.
(7+3)

6A. Let ht, hr, Gt and Gr values are 40 m, 3 m, 0 dB and 0 dB respectively, for a wireless communication
system operating at 1800 MHz. The power received is 1W at a reference distance of 1 km. Find
the received power in dBm at 2 km and 10 km distances for the path loss models (i) Free Space (ii)
 = 3 (iii) Extended Hata model for larger cities.
6B. Define Power Delay Profile and Coherence Bandwidth. Support your answer with the help of
necessary equations and figures.
(7+3)

ECE –405 Page 2 of 2

You might also like