Scribd Logo
Upload

Welcome to Scribd!

  • 407 views

    Risk Assessment For Shifting of Truss by Double Hydra

    Uploaded by

    Danang Santoso
    This risk assessment document summarizes the risks and control measures for shifting a truss using two hydraulic cranes. It identifies potential hazards such as falls, failure of lifting equipment, improper hooking, and overloading. Control measures include using skilled operators, inspected rigging equipment, communications between operators, and restricting lifts to 5 metric tons or less during the day. Additional precautions are outlined for shifts over 10 metric tons, such as stopping to reposition the cranes and loads. The document was prepared by the contractor and approved by both the contractor and LIPL safety manager.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd

    Risk Assessment For Shifting of Truss by Double Hydra

    Uploaded by

    Danang Santoso
    407 views1 page
    This risk assessment document summarizes the risks and control measures for shifting a truss using two hydraulic cranes. It identifies potential hazards such as falls, failure of lifting equipment, improper hooking, and overloading. Control measures include using skilled operators, inspected rigging equipment, communications between operators, and restricting lifts to 5 metric tons or less during the day. Additional precautions are outlined for shifts over 10 metric tons, such as stopping to reposition the cranes and loads. The document was prepared by the contractor and approved by both the contractor and LIPL safety manager.

    Original Title

    Risk Assessment for shifting of Truss by double hydra

    Copyright

    © © All Rights Reserved

    Available Formats

    XLS, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This risk assessment document summarizes the risks and control measures for shifting a truss using two hydraulic cranes. It identifies potential hazards such as falls, failure of lifting equipment, improper hooking, and overloading. Control measures include using skilled operators, inspected rigging equipment, communications between operators, and restricting lifts to 5 metric tons or less during the day. Additional precautions are outlined for shifts over 10 metric tons, such as stopping to reposition the cranes and loads. The document was prepared by the contractor and approved by both the contractor and LIPL safety manager.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    407 views1 page

    Risk Assessment For Shifting of Truss by Double Hydra

    Uploaded by

    Danang Santoso
    This risk assessment document summarizes the risks and control measures for shifting a truss using two hydraulic cranes. It identifies potential hazards such as falls, failure of lifting equipment, improper hooking, and overloading. Control measures include using skilled operators, inspected rigging equipment, communications between operators, and restricting lifts to 5 metric tons or less during the day. Additional precautions are outlined for shifts over 10 metric tons, such as stopping to reposition the cranes and loads. The document was prepared by the contractor and approved by both the contractor and LIPL safety manager.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    of 1

    Risk Assessment/Management Form

    Ref:
    Section / Dept: civil Activity: Risk Assessment for shifting of Location / Area :
    Contractor :- M/S Simplex Infrastructures Truss by double hydra
    Limited

    bility
    Sl Basic Job Potential Consequenc Current control measure Initial Addition Ri

    Resid
    bility

    ual
    Risk rating

    risk
    Proba

    Proba
    No. Steps Hazard e Risk al s
    control k
    P E A R measur raP E A R
    e ti
    Only skilled &experienced work men deployed in the n
    job with safety shoe ,hand gloves ,safety helmet and g
    Get Injury/ tested tools &tackles. Use guide rope during shifting
    Fall of materials of materials and always keep away from swing 1 0 0 1 3 6
    Fatality
    area.Daily tool box talk before starting of job by crew
    supervisor.

    All the wire rope sling & D-shackle visually checked .


    Failure of wire rope Tested sling are colour coaded by a specific colour
    Get Injury .Daily tool box talk before starting of job by crew 2 0 0 1 2 4
    sling/D-shackle
    supervisor.
    Skilled workmen shall be engaged for hooking of
    material.Hook of hydra must be provided with hook
    Hooking of material Get injury latchaily tool box talk before starting of job by crew 2 0 0 0 2 4
    supervisor.
    People should maintain safe distance from the load
    while lifting and shifting.Guied rope to be fixed on both
    ends of the material.Communication with the hydra
    operator will be one to one talk and signal will be
    issued by the signal man with blue helmet.

    Shifting of Shifting of material by double hydra will be carried out


    theGallery by during day time only and both the hydra operators,site
    1 Get injury 1 0 0 0 2 2
    Double Hydra engineer,safety officer and the Rigger will inspect the
    up to max.5 MT shifting route first.
    After the prior permission of area incharge and safety
    Manager/Dy manager of LIPL the job will start

    The weight of the lifting materials should not exceed


    5MT
    Shifting area should be of suitable for approach
    People should not unhook the sling during tension.
    Unhooking of
    Injury to person Only skilled person will remove the sling from the 1 0 0 0 2 2
    material hook.
    Marking of SWL at different lifting hooks of hydra.
    Toppling of Hydra Only Trained & experienced operator operate the
    due to excess Injury / Fatality hydra.Material above the safe working load mentioned 2 0 0 1 2 4
    loading at the lifting position shall not be lifted.
    One signal man will communicate both the hydra
    operators and minimum 8persons will be engaged for
    the job by the contractor
    Man/Materials
    Traffic Control 1 0 0 1 2 2
    loss The person includes-site engineer,2nos hydra
    operators,1no.signal man,one rigger,Safety Manager
    and 2nos.hydra helpers
    EXTRA PRECAUTIONS FOR 1) During turning both hydra to be
    SHIFTING OF 10MT GALLERY stopped,repositioned and make the gallery straight
    & then proceed the shifting
    2) During entire shifting both hydra & the gallery
    should be in a straight line

    Prepaired by Approved by Reviwed by


    Contractor Contractor LPIL
    Date Date Date

    1of1

    You might also like