OFFICE OF THE PROJECT DIRECTOR

MPPWD (PIU) NIRMAN BHAWAN,BHOPAL

SCHEDULE OF RATES FOR BUILDING WORKS (w.e.f. 0L.L2.20201
( ERRATA/AMMENDMENT/ADDENDUM NO. 01 )

The following item of Building SoR w,e,f, 1,11212020 is ammended as under, This amendment shall be applicable with effect from the date
of issue of this order i.e. 29/0L/2O21,

SOR ITEM EXISTING AMMENDMENT

NO. ITEM NAME DESCRIPTION UNIT RATE DESCRIPTION UNIT RATE

CHAPTER NO. -5 (Reinforced Cement Concrete )

5.31 EXTRA FOR EXTRA FOR R,C.C. WORK ABOVE CUM t% oF EXTRA FOR R.C.C. WORK ABOVE CUM L% OF
R.C.C. WORK FLOOR TWO LEVEL FOR EACH RESPECTIVE FLOOR TWO LEVEL FOR EACH RESPECTIVE
ABOVE FLOOR FLOORS OR PART THEREOF. ( ITEM FLOORS OR PART THEREOF. ( ITEM
rWO LEVEL EXCEPT TTEMS 5.25 AND 5.29 ) EXCEPT TTEMS 5.27 AND 5.30 )

CHAPTER NO.-9 (Wood Work, PVC Work and UPVC Work)

9.205 DEDUCT FOF DEDUCT FOR NOT PROVIDING 2ND SQM 401.00 DEDUCT FOR NOT PROVIDING SQM 401.00
NOT CLASS TEAK WOOD BATTEN 2ND CLASS TEAK WOOD BATTEN
PROVIDING LIPPING IN FACTORY MADE LIPPING IN FACTORY MADE
2ND CLASS SHUTTERS i.e. ITEM NO 9.193 AND SHUTTERS i.e. ITEM NO 9.203
TEAK WOOD 9.L94 AND 9.204
BATTEN
LIPPING

Page 1 of 5
SOR ITEM EXISTING AMMENDMENT
NO. ITEM NAME DESCRIPTION UNIT RATE
DESCRIPTION UNIT RATE

CHAPTER NO.-11 { Floorine

11.65 Cement Providing and laying factory made SQM 702.00 DELETED
Concrete paver coloured chamfered edge Cement
blocks
Concrete paver blocks of required
strength, thickness and size/shape,
made by table vibratory method
using PU mould, laid in required
colour and pattern over 50mm
thick compacted bed of stone dust,
compacting and proper
embedding/laying of inter locking
paver blocks into the bedding layer
through vibratory compaction by
using plate vibrator, filling the
joints with sand and cutting of
paver blocks as per required size
and pattern, finishing and
sweeping extra sand including
locking edges with M 1"5 cement
concrete in footpath, parks, lawns,
drive ways or light traffic parking
etc. complete as per
manufacturer's specifications and
direction of Engineerin- Charge.
60mm thick C.C. paver block of M-
35 grade with approved colour,
design and pattern.

/
)--*<' Project Director
PWD PIU Bhopal

Page 2 of 5
 EXISTING

Chamfered
840.00 Providing and laying factory
edge cement chamfered edge Cement
chamfered edge Cement Concre
concrete paver paver blocks of required colour
blocks over
paver blocks in footpath, parks,
thickness pattern.
texture (smooth/ drive ways or light
and size/ shape, conforming ng etc, of required colour,
15658-2006 tS marked made by strength, thickness,
table vibratory method using pU surface texture (smooth/
laid in required colour size/shape conforming to
over 50mm thic 15558-2006 made by table
of stone dust,
compacted bed
vibratory method using pU
compacting and proper
laid in required colour & pattern
laying of inter locki
blocks into the bedding 50mm thick compacted bed
through vibratory compaction sand, compacting and proper
using plate vibrator, filling the embedding/laying of inter
with sand and cutting blocks into the sand
blocks as per required layer through vibratory
pattern. finishing compaction by using plate vibrator,
sweeping extra sand incl
filling the joints with sand and
edges in 0.30 mm
porch with of paver blocks as
M I
cement concrete in foot path, uired size and pattern, finishing
parks, lawns, drive ways or light and sweeping extra sand i

traffic parking etc. complete as per locking edges with Mj.5 cement
in foot path, parks, lawns,
of Engineer-inCharge. drive ways or light traffic parki
etc. complete as
manufacturer's specifications and

1.1.72.7 80 mm thick C.C. paver block of M,

mm thick C.C. paver block of M-

50 mm thick C.C. paver block of M_

mm thick C.C. paver block of M-

mm thick C.C. paver block of

60 mm thick C.C. paver block of M-

Page 3 of 5
SOR ITEM EXISTING AMMENDMENT
NO. ITEM NAME DESCRIPT!ON UNIT RATE DESCRIPTION UNIT RATE

CHAPTER NO. - 26 (Fire Fighting System )

26.6 Butterfly valve Providing, fixing, testing and Providing, fixing, testing anc
commissioning of butterfly valve commissioning of butterfly valve
PN 1.5, with Bronze/Gunmetal seat PN 1.6, with Bronze/Gunmeta
duly lSl marked complete with seat duly lSl marked complet€
Nuts, Bolts, washers, gaskets, with Nuts, Bolts, washers,
confirming to lS 13095, of gaskets, confirming to lS L3095,
following sizes as required. of following sizes as required.

26.5.1 200mm dia EACH 8s30.00 200mm dia EACH 8s30.00

26.6.2 150mm dia EACH 6815.0C 150mm dia EACH 6815.00
26.6.3 BOmm dia EACH 4s00.0c L00mm dia EACH 4s00.00
26.6.4 30mm dia EACH 3400.0c 80mm dia EACH 3400.00
25.5.5 55mm dia EACH 2515.0C 65mm dia EACH 2515.00
26.6.6 50mm dia EACH 1925.0C 50mm dia EACH 1925.00

/* Project Director
PWD PIU Bhopal

Page 4 of 5
 SOR ITEM EXISTING AMMENDMENT
NO. ITEM NAME DESCRIPTION UNIT RATE DESCRIPTION UNIT RATE

CHAPTER NO-- 27 I Miscellaneous I

27.t0 Precast Providing and fixing of prestressed metre 3345.00 Providing and fixing of metre 3345.00
Boundary Wall vertically casted concrete panels prestressed vertically casted
(both surfaces should be smooth concrete panels (both surfaces
and having grooves on both faces) should be smooth and having
of M-40 grade of concrete of size grooves on both faces) of M-40
2100x300x50 mm having grade of concrete of size
minimum 4 nos of high tensile 2100x300x50 mm having
steel wire as per lS 6006:2014 of minimum 4 nos of high tensile
dia 3 mm placed horizontally in full steel wire as per lS 6006:2014 of
dia 3 mm placed horizontally in
length of panel with prestressed
precast concrete column of M-40 full length of panel with
prestressed precast concrete
grade of size 3000x150x150 mm
having minimum 7 nos of high
column of M-40 grade of size
3000x150x1-50 mm having
tensile steel wire as per lS
minimum 7 nos of high tensile
6006:20L4 of dia 6 mm placed
steel wire as per lS 5005:2014 of
vertically in full length to erect
dia 3 mm placed vertically in full
precast boundary wall panels to
length to erect precast boundary
height 2100 mm from GL including
wall panels to height 2100 mm
excavation of pit of size from GL including excavation of
750x750x900 mm in all kind of soil pit of size 750x750x900 mm in
except rock for erection of all kind of soil except rock for
columns and grouting the pit with erection of columns and grouting
M-20 grade of concrete. the pit with M-20 grade of
Manufacturing, transportation and concrete. Manufacturing,
installation at site all complete as transportation and installatlon at
per site all complete as per
the direction of Engineer-in- the direction of Engineer-in-
Charge Charge.

PROJECT DIRECTOR
PWD PIU BHOPAL

Endt. No. F- (4.1 otzozllCommon SOR/BuitdingipD/ Ly Bhopal,Date 21 tot tzOzt

Copy is forwarded to:-
1 P.A to Hon'ble Minister,M.P P.W.D. Bhopal
2 The Principal Secretary to Govt. of M.P.P.W.D.Bhopal
3 The Secretary to Govt. of M.P.P.W.D. .Bhopal
4 The Engineer-in -Chief, M.P.P.W.D. .Bhopal
5 The Chief Technical Examiner, M.p. Bhopal.
6 The Principal Secretary to Govt. Of M.P. Housing & Environment Bhopal.
7 The Accountant General, M.P. Gwalior/Bhopal.
8 The Secretary to Hon'ble Lokayukta, M.p. Bhopal.
9 The Chief Engineer, P.W.D ---------------------- M.p.
10 The Additional Project Director P.W.D. (PtU) -------------- M.p.
11 The Chief Engineer, M.P. R.D.C. Bhopal.
12 The Chief Engineer, Rural Engineering Services, M.p. Bhopal
13 The Divisional Project Engineer M.p. pWD
14 The Executive Engineer, MP P.W.D. Division
15 Chairman, Contractor Association, Mp Bhopal.

PWD PIU BHOPAL

Page 5 of 5
 OFFICE OF THE PROJECT DIRECTOR
MPPWD (PIU) NIRMAN BHAWAN,BHOPAL
SCHEDULE OF RATES FOR BUILDING WORKS (w.e.f.0r.12.2020 )
( ERRATA/AMM EN DM ENT/ADDENDUM NO. 01")

The following SOR item of Building SOR w.e.f. l/72/2O2O is Addendum as under and shall be applicable with
effective from the date of issue of the order i.e, 29 101,/2027

ITEM NO. SUB ITEM ITEM DESCRIPT!ON UN!T RATE

NO. NAME

t 2 3 4 5 6
4.26 RCC for Providing and laying cement concrete in Sunken cum 31.41
sunken floors of WC, Toilets, Wash Areas etc with
floor 1;5:10 (1 cement : 5 coarse sand (zone-lll) : 10
graded stone aggregate 40 mm nominal size). ,
excluding the cost of centering and shuttering.

PROJECT DIRECTOR
PWD PIU BHOPAT

Endt. No. r-L0-thtzO2llCommon SOR/Buitdin g/tpDt 1{ Bhopat,Dat??tuD02t

Copy is forwarded to:-

1 P.Ato Hon'ble Minister,M.P P.W.D. Bhopal

2 The Principal Secretary to Govt. of M.P.P.W.D.Bhopal
3 The Secretary to Govt. of M.p.p.W.D. .Bhopal
4 The Engineer-in -Chief, M.P.P.W.D. .Bhopal
5 The Chief Technical Examiner, M.P. Bhopal.
5 The Principal Secretary to Govt. Of M.P. Housing & Environment Bhopal.
7 The Accountant General, M.P. Gwalior/Bhopal.
8 The Secretary to Hon'ble Lokayukta, M.P. Bhopal.
9 The Chief Engineer, P.W.D ---------------------- M.P.
10 The Additional Project Director P.W.D. (PtU) -------------- M.p.
11 The Chief Engineer, M.P. R.D.C. Bhopal.
12 The Chief Engineer, Rural Engineering Services, M.p. Bhopal
13 The Divisional Project Engineer M.P. PWD
t4 The Executive Engineer, MP P.W.D. Division
15 Chairman, Contractor Association, MP Bhopal.
PROJECT DIRECTOR

Page 1 of 1