Scribd
Upload
853 views7 pages

MiG-29 v2.01 Checklists

The document provides step-by-step checklists for various procedures related to operating an aircraft, including starting engines, taxiing, takeoff, landing, emergencies, and weapon usage. It outlines over 50 individual checks and settings to complete for tasks like engine startup (15 steps), taxi (20 steps), landing (9 steps), and weapon firing (10 steps). The checklists are highly detailed and cover all primary aircraft systems, controls, and indicators that must be verified at each phase of flight.

Uploaded by

Dave91
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
853 views7 pages

MiG-29 v2.01 Checklists

The document provides step-by-step checklists for various procedures related to operating an aircraft, including starting engines, taxiing, takeoff, landing, emergencies, and weapon usage. It outlines over 50 individual checks and settings to complete for tasks like engine startup (15 steps), taxi (20 steps), landing (9 steps), and weapon firing (10 steps). The checklists are highly detailed and cover all primary aircraft systems, controls, and indicators that must be verified at each phase of flight.

Uploaded by

Dave91
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 7

BEFORE ENGINE START

1. External checks COMPLETED


2. Assure BRAKES closed CHECK
3. Check BRAKES pressure FULL CHECK
4. Set NOSE WHEEL BRAKE to ON position SET
5. MASTER ARM switch in SAVE position CHECK
6. Switch Battery ON SET
7. Switch DC / AC CONV ON (Electrical Panel) SET
8. All Switches on Electrical Panel to ON SET
(DC GEN + AC GEN + ENG SYS + FUEL PUMP +
ANTI SURGE)
9. All Switches on Aircarft Systems Panel to ON SET
(RADIO + ACFT SYS + GYRO MAIN + GYRO
STBY + NAVIGATION + AFCS + AP SRC +
RECORD + WEAPON + ACS)
10. Perform SYSTEMS CHECK CHECK
11. Check FUEL QUANTITY CHECK
12. Perform lamp test on TELELIGHT PANEL CHECK
13. Set COM frequencies as required SET
14. Switch BEACON light ON SET
15. Switch NAV light ON SET

ENGINE START
1. Check APU RUNNING lamp ON CHECK
2. Otherwise switch to APU START SET
3. BLEED AIR switch to LEFT ENG or RIGHT ENG CHECK
4. Set THROTTLES to IDLE SET
5. Check FUEL CUTOFF switch of engine to CLOSE Check
6. Check FIRE EXTINGUISHER L + R SAVE CHECK
7. Check EMERG RAMP CLOSE switch L + R SAVE CHECK
8. Check INTAKES free CHECK
9. Push and hold ENG START until 25%RPM PUSH
10. Check engine RPM increasing CHECK
11. Check engine EGT increasing CHECK
12. TELELIGHT PANEL – Check ENG START lamp CHECK
lighting
13. Release starter button on 25%RPM SET
14. Check hydraulic and pneumatic pressure CHECK
increasing
15. Check engine RPM reaches and mantains IDLE CHECK
at 60%RPM
16. Check engine EGT afterwards is below 500°C CHECK
17. Check ENG START lamp OFF
18. Check TELELIGHT PANEL + AEKRAN no warn CHECK
19. Check engine INTAKE closed CHECK
20. START 2nd engine after 30 sec CHECK
(Begin on point 1)
21. After engines are runnig -> Switch APU off SET
22. Assure BLEED AIR switch is on RIGHT ENG SET

BEFORE TAXI
1. Check oxygen supply CHECK
2. Switch TRANSPONDER ON SET
3. SET TRANSPONDER frequency SET
4. Control stick and rudder trim neutral – CHECK
TELELIGHT PANEL NEUTRAL lights
5. Check free control movement CHECK
6. Set PITOT HEAT as required SET
7. Set ALTIMETER SET
8. Set RADAR ALTITUDE WARNING LAMP SET
9. Switch RADAR ON and set to required MODE SET
and RANGE
10. Switch IFF ON and set as required SET
11. Set cabin heat to AUTO or as required SET
12. Set CABIN TEMPERATURE as required SET
13. Set CABIN and SUIT VENTILATION as required SET
14. Check CLOCK CHECK
15. Set CLOCK TIMER as required SET
16. Switch STROBE lights ON SET
17. Switch TAXI light and LANDING lights ON as SET
required
18. Close CANOPY to nearly closed position CLOSE
19. Set NOSE WHEEL BRAKE to OFF position SET
20. Release BRAKES to TAXI SET

LAST CHANCE
1. Close CANOPY completely CLOSE
2. Check LOCK CANOPY light OFF CHECK
3. Check PIN flush CHECK
4. SET CABIN pressure as required SET
5. TELELIGHT PANEL + AEKRAN no warnings CHECK
6. Check ENGINES RPM and EGT normal CHECK
7. Check HYRAULIC and PNEUMATIC PRESSURE CHECK
normal
8. Check BRAKE PRESSURE normal CHECK
9. SET FLAPS as required SET

AFTER TAKEOFF
1. GEAR UP SET
2. FLAPS UP SET
3. Check ENGINES RPM and EGT normal CHECK
4. Check HYRAULIC and PNEUMATIC PRESSURE CHECK
normal
5. Check RAMPS UP CHECK
BEFORE LANDING
1. Check MASTER ARM switch to SAVE CHECK
2. Calculate FINAL APPROACH SPEED (flip 2 pag.) CHECK
3. Check DOWNWIND SPEED 240KIAS CHECK
4. Set GEAR DOWN SET
5. Switch LANDING light ON if required SET
6. Check GEAR DOWN CHECK
7. Check ENGINES RPM and EGT normal CHECK
8. Check HYRAULIC and PNEUMATIC PRESSURE CHECK
normal

LANDING
1. Check BASE SPEED 190KIAS CHECK
2. Apply AIRBRAKE if required SET
3. Set FLAPS DOWN and CHECK SET/CHECK
4. Check FINAL APPROACH SPEED CHECK
5. Check GLIDESLOPE CHECK
6. AFTER TOUCHDOWN set THORTTLE to IDLE SET
7. Derotate for BRAKE CHUTE SET
8. Release BRAKE CHUTE if required SET
9. Apply wheel BRAKES SET

AFTER LANDING
1. Jettison BRAKE CHUTE SET
2. FLAPS UP SET
3. LANDING and TAXI lights as required SET

ENGINE SHUTDOWN
1. Check THROTTLE IDLE CHECK
2. Start APU if required SET
3. Switch FUEL SHUTOFF L+ R ENGINE to CLOSE SET
ENGINE FIRE
1. CAUTION ONLY FOR ENGINE ON FIRE CHECK
2. Set THROTTLE to IDLE SET
3. Switch FUEL SHUTOFF to CLOSE SET
4. Switch FIRE EXTINGUISHER ON SET
5. Check TELELIGHT PANEL ENGINE FIRE lamp CHECK
6. Wait max 15sec CHECK
7. If ENGINE is still on FIRE -> E J E C T
8. If ENGINE FIRE is OUT CHECK
9. Switch FIRE EXTINGUISHER OFF (central pos) SET
10. Initiate ENGINE RESTART IN AIR procedure CHECK

ENGINE RESTART IN AIR


1. CAUTION ONLY FOR ENGINE TO START IN AIR CHECK
2. Check THROTTLE in IDLE position SET
3. Check FUEL SHUTOFF to CLOSE CHECK
4. Switch ENGINE RESTART IN AIR to START SET
5. Push STARTER BUTTON until 25%RPM SET
6. Check engine RPM and EGT increasing CHECK
7. Release STARTER BUTTON on 25%RPM RELEASE
8. Over 60% RPM LINK THROTTLES again SET
9. If RESTART is NEGATIVE ->
LAND AS SOON AS POSSIBLE

EMERGENCY GEAR / FLAP EXTENSION / BRAKE


1. In case of HYDRAULIC / PNEUMATIC FAILURE CHECK
2. Set GEAR leaver to DOWN SET
3. Pull EMGERGENCY GEAR handle SET
4. Check GEAR DOWN CHECK
5. AFTER LANDING
6. Pull EMERGENCY BRAKE handle SET
WEAPON USAGE
1. After clearance from ground control CHECK
2. In case of DOGFIGHT -> JETTISON DROP TANK SET
3. Set RADAR or IR (MODE and RANGE) SET
4. Switch MASTER ARM switch to ARM SET
5. Set TARGET with TARGET SELECT switch SET
6. Set appropriate weapon with WEAPON SET
SELECT switch
7. Assure TARGET in RANGE Check
8. Assure appropriate angle to TARGET Check
9. Check no wingman in fireline Check
10. - F - I - R - E - SET

DEFENSIVE MEASURES
1. LOCATE ENEMY visualy or with RWR (radar CHECK
warning reciver)
2. Initiate evasive manoeuvres CHECK
3. Dump CHAFF and FLARE SET

FINAL APPROACH SPEED


Weight SPEED
pounds KIAS
24000 136 ADD ANOTHER 2 KIAS
26000 140 WITH EXTERNAL LOADS
28000 144
30000 148
32000 152
34000 156 RULE OF THUMB:
36000 160 Empty weight = 136KIAS
38000 164 For every 1.000 KG (Fuel) + 5KIAS
40000 168 FULL EXTERNAL LOAD = + 10KIAS

You might also like