Maintenance

Software

MMN:SW-COFIP

A30808-X3080-C485-5-7620
MMN:SW Maintenance
Software

Copyright (C) Siemens AG 1999

Issued by the Information and Communication Networks Group

Hofmannstraße 51
D-81359 München

Technical modifications are possible.

Technical specifications and features are binding only insofar
as they are specifically and expressly agreed upon in a written
contract.

AD-2 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

Issues
Note on the change indication:

The change indications for a title marked as issue 1 refer to the previous version.

The change indications for a title with an issue greater than 1 refer to the preceding
issue.

Change indications (Ind.):

N = new; G = modified; 0 = deleted;

Document Titel Issue/Ind.

Register COFIP

MMN:SW-COFIP AD 5 G
MMN:SW-COFIP REC51 1
MMN:SW-COFIP REC52 1
MMN:SW-COFIP REC53 1
MMN:SW-COFIP REC54 5 G
MMN:SW-COFIP REC55 1
MMN:SW-COFIP REC71 1
MMN:SW-COFIP REC72 1
MMN:SW-COFIP REC73 1
MMN:SW-COFIP REC74 1
MMN:SW-COFIP REC75 1
MMN:SW-COFIP REC76 1
MMN:SW-COFIP REC77 5 G
MMN:SW-COFIP REC78 1
MMN:SW-COFIP REC79 1
MMN:SW-COFIP REC91 1
MMN:SW-COFIP REC92 1
MMN:SW-COFIP M11AP 5 G
MMN:SW-COFIP Q11AP 5 G
MMN:SW-COFIP Q12AP 5 G
MMN:SW-COFIP R11AP 5 G
MMN:SW-COFIP M21AP 5 G
MMN:SW-COFIP Q21AP 5 G
MMN:SW-COFIP Q22AP 5 G
MMN:SW-COFIP R21AP 5 G
MMN:SW-COFIP RCAMA 1
MMN:SW-COFIP RCDNB 1
MMN:SW-COFIP RCERS 1
MMN:SW-COFIP RCFIR 1
MMN:SW-COFIP RCIAR 1
MMN:SW-COFIP RCINA 1
MMN:SW-COFIP RCMAL 1
MMN:SW-COFIP RCMOB 1
MMN:SW-COFIP RCPMB 1
MMN:SW-COFIP RCTOB 1
MMN:SW-COFIP RCTST 1
MMN:SW-COFIP RDAMA 1 N
MMN:SW-COFIP RDDNB 1 N
MMN:SW-COFIP RDERS 1 N
MMN:SW-COFIP RDFIR 1 N

A30808-X3080-C485-5-7620 AD-3
MMN:SW Maintenance
Software

MMN:SW-COFIP RDIAR 1 N
MMN:SW-COFIP RDINA 1 N
MMN:SW-COFIP RDMAL 1 N
MMN:SW-COFIP RDMOB 1 N
MMN:SW-COFIP RDPMB 1 N
MMN:SW-COFIP RDTOB 1 N
MMN:SW-COFIP RDTST 1 N
MMN:SW-COFIP HADMI 1
MMN:SW-COFIP HCCNC 1
MMN:SW-COFIP HHISD 4
MMN:SW-COFIP HHIST 4
MMN:SW-COFIP HLTDL 1
MMN:SW-COFIP HMAST 1
MMN:SW-COFIP HOSIA 1
MMN:SW-COFIP HPERI 1
MMN:SW-COFIP HRECO 1
MMN:SW-COFIP HSONS 1
MMN:SW-COFIP HVTAD 1
MMN:SW-COFIP HVTAL 1
MMN:SW-COFIP LOT01 1
MMN:SW-COFIP LOT02 1
MMN:SW-COFIP LOT03 1
MMN:SW-COFIP PSW01 1
MMN:SW-COFIP PSW02 1
MMN:SW-COFIP PSW03 1
MMN:SW-COFIP PSW04 1
MMN:SW-COFIP EXP01 1
MMN:SW-COFIP EXP02 1
MMN:SW-COFIP EXP04 1
MMN:SW-COFIP TELE1 1
MMN:SW-COFIP TELE2 1
MMN:SW-COFIP ZORD1 5 G
MMN:SW-COFIP ZORD2 5 G

This document consists of a total of 470 Pages

AD-4 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

REC51

1 <CMDFILE;
2 /
3 // 80-REC51-01
4 /
5 /****V01***************************************************************
6 /* *
7 /* COMMAND FILE CG.SA.REC51 FOR RECOVERY FROM SAVE TAPE *
8 /* ==================================================== *
9 /* *
10 /* TASK DESCRIPTION: *
11 /* ----------------- *
12 /* - OPENING LOG FUNCTION *
13 /* - UPDATING THE DATABASE FROM THE LOG FILE SAVE TAPE (EY170) *
14 /* *
15 /* FAULT HANDLING: *
16 /* ----------------- *
17 /* - AFTER INTERRUPTION OF THE FILE PROCESSING VIA FAULT *
18 /* EXITS AND CORRESPONDING FAULT HANDLING THE FILE CAN *
19 /* BE STARTED AGAIN *
20 /* *
21 /* SWITCH PRESETTINGS FOR START POINTS AND ENTRY POINTS: *
22 /* ===================================================== *
23 /* START POINT SWITCH PRESETTINGS *
24 /* ----------- ------------------ *
25 /* 1. START: *
26 /* ACTIVATION LOG FUNCTION RESETCFOPT; *
27 /* 2. START: *
28 /* LOADING LOG FILES SETCFOPT:OFF=1&&14&16,ON=15; *
29 /* 3. START: *
30 /* ACTUALIZATION LOG FILES SETCFOPT:OFF=1&&15,ON=16; *
31 /* *
32 /* ENTRY POINT SWITCH PRESETTINGS *
33 /* ----------- ------------------ *
34 /* FAULT 01 SETCFOPT:OFF=1&&14&16,ON=15,SCOPE=GLOBAL; *
35 /* *
36 /**********************************************************************
37 /
38 <SETCFOPT:ACKCFS=ERROR,DANCMD=EXEC,ACKREQ=POS,SCOPE=GLOBAL;
39 /
40 <SKIPCMD:LABEL=END,ON=1;
41 <SKIPCMD:LABEL=M3,ON=15;
42 <SKIPCMD:LABEL=M4,ON=16;
43 /
44 .M1 <STEP;
45 //
46 // *****************************
47 // * DEACTIVATING LOG-FUNCTION *
48 // *****************************
49 /
50 <RSET LOG;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-5
MMN:SW Maintenance
Software

REC51

51 /
52 .M2 <STEP;
53 //
54 // ***************************
55 // * ACTIVATING LOG-FUNCTION *
56 // ***************************
57 /
58 <SET LOG:FILE=LOG6,SIZE=24,ERASE=YES;
59 <SKIPCMD:LABEL=OUT;
60 /
61 .M3 <STEP;
62 //
63 // ********************************************
64 // * TRANSFERRING LOG FILES FROM TAPE TO DISK *
65 // ********************************************
66 /
67 <TRANS FILE:FILE=ACT.LG./LG.,VSNS=LOGTAP,COPMOD=CHAR;
68 <SKIPCMD:LABEL=AB1,ON=32;
69 /
70 <DISP FILE:FILE=LQ.;
71 <SKIPCMD:LABEL=T3,ON=32;
72 <TRANS FILE:FILE=ACT.LQ./LQ.,VSNS=LOGTAP,COPMOD=BIN;
73 <SKIPCMD:LABEL=AB1,ON=32;
74 /
75 .T3 <SKIPCMD:LABEL=OUT;
76 /
77 .M4 <STEP;
78 //
79 // *********************************
80 // * UPDATING THE DATABASE STARTED *
81 // *********************************
82 /
83 .T41 <DISP FILE:FILE=ACT.LG.LOG6.;
84 <SKIPCMD:LABEL=T42,ON=32;
85 /
86 <EXEC CMDFILE:FILE=ACT.LG.LOG6.A1;
87 <DISP FILE:FILE=ACT.LG.LOG6.A2;
88 <SKIPCMD:LABEL=T411,ON=32;
89 <EXEC CMDFILE:FILE=ACT.LG.LOG6.A2;
90 <DISP FILE:FILE=ACT.LG.LOG6.A3;
91 <SKIPCMD:LABEL=T411,ON=32;
92 <EXEC CMDFILE:FILE=ACT.LG.LOG6.A3;
93 /
94 .T411 <DEL FILE:FILE=ACT.LG.LOG6.;
95 <DEL FILE:FILE=ACT.LQ.LOG6.;
96 <STEP;
97 /
98 .T413 <SKIPCMD:LABEL=M5;
99 /
100 .T42 <DISP FILE:FILE=ACT.LG.LOG5.;

MMN:SW-COFIP-6 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

REC51

101 <SKIPCMD:LABEL=T43,ON=32;
102 /
103 <EXEC CMDFILE:FILE=ACT.LG.LOG5.A1;
104 <DISP FILE:FILE=ACT.LG.LOG5.A2;
105 <SKIPCMD:LABEL=T421,ON=32;
106 <EXEC CMDFILE:FILE=ACT.LG.LOG5.A2;
107 <DISP FILE:FILE=ACT.LG.LOG5.A3;
108 <SKIPCMD:LABEL=T421,ON=32;
109 <EXEC CMDFILE:FILE=ACT.LG.LOG5.A3;
110 /
111 .T421 <DEL FILE:FILE=ACT.LG.LOG5.;
112 <DEL FILE:FILE=ACT.LQ.LOG5.;
113 <STEP;
114 /
115 .T423 <SKIPCMD:LABEL=M5;
116 /
117 .T43 <DISP FILE:FILE=ACT.LG.LOG4.;
118 <SKIPCMD:LABEL=T44,ON=32;
119 /
120 <EXEC CMDFILE:FILE=ACT.LG.LOG4.A1;
121 <DISP FILE:FILE=ACT.LG.LOG4.A2;
122 <SKIPCMD:LABEL=T431,ON=32;
123 <EXEC CMDFILE:FILE=ACT.LG.LOG4.A2;
124 <DISP FILE:FILE=ACT.LG.LOG4.A3;
125 <SKIPCMD:LABEL=T431,ON=32;
126 <EXEC CMDFILE:FILE=ACT.LG.LOG4.A3;
127 /
128 .T431 <DEL FILE:FILE=ACT.LG.LOG4.;
129 <DEL FILE:FILE=ACT.LQ.LOG4.;
130 <STEP;
131 /
132 .T433 <SKIPCMD:LABEL=M5;
133 /
134 .T44 <DISP FILE:FILE=ACT.LG.LOG3.;
135 <SKIPCMD:LABEL=T45,ON=32;
136 /
137 <EXEC CMDFILE:FILE=ACT.LG.LOG3.A1;
138 <DISP FILE:FILE=ACT.LG.LOG3.A2;
139 <SKIPCMD:LABEL=T441,ON=32;
140 <EXEC CMDFILE:FILE=ACT.LG.LOG3.A2;
141 <DISP FILE:FILE=ACT.LG.LOG3.A3;
142 <SKIPCMD:LABEL=T441,ON=32;
143 <EXEC CMDFILE:FILE=ACT.LG.LOG3.A3;
144 /
145 .T441 <DEL FILE:FILE=ACT.LG.LOG3.;
146 <DEL FILE:FILE=ACT.LQ.LOG3.;
147 <STEP;
148 /
149 .T443 <SKIPCMD:LABEL=M5;
150 /

A30808-X3080-C485-5-7620 MMN:SW-COFIP-7
MMN:SW Maintenance
Software

REC51

151 .T45 <DISP FILE:FILE=ACT.LG.LOG2.;

152 <SKIPCMD:LABEL=T46,ON=32;
153 /
154 <EXEC CMDFILE:FILE=ACT.LG.LOG2.A1;
155 <DISP FILE:FILE=ACT.LG.LOG2.A2;
156 <SKIPCMD:LABEL=T451,ON=32;
157 <EXEC CMDFILE:FILE=ACT.LG.LOG2.A2;
158 <DISP FILE:FILE=ACT.LG.LOG2.A3;
159 <SKIPCMD:LABEL=T451,ON=32;
160 <EXEC CMDFILE:FILE=ACT.LG.LOG2.A3;
161 /
162 .T451 <DEL FILE:FILE=ACT.LG.LOG2.;
163 <DEL FILE:FILE=ACT.LQ.LOG2.;
164 <STEP;
165 /
166 .T453 <SKIPCMD:LABEL=M5;
167 /
168 .T46 <EXEC CMDFILE:FILE=ACT.LG.LOG1.A1;
169 <DISP FILE:FILE=ACT.LG.LOG1.A2;
170 <SKIPCMD:LABEL=T461,ON=32;
171 <EXEC CMDFILE:FILE=ACT.LG.LOG1.A2;
172 <DISP FILE:FILE=ACT.LG.LOG1.A2;
173 <SKIPCMD:LABEL=T461,ON=32;
174 <EXEC CMDFILE:FILE=ACT.LG.LOG1.A3;
175 /
176 .T461 <DEL FILE:FILE=ACT.LG.LOG1.;
177 <DEL FILE:FILE=ACT.LQ.LOG1.;
178 <STEP;
179 /
180 .M5 <STEP;
181 //
182 // *******************************
183 // * UPDATING THE DATABASE ENDED *
184 // *******************************
185 /
186 <SKIPCMD:LABEL=OUT1;
187 / *******************************
188 / * FAULT EXITS AND END MESSAGE *
189 / *******************************
190 /
191 .AB1 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
192 // ****************
193 // *** FAULT 01 ***
194 // ****************
195 // **********************************************
196 // *** TRANSFERRING LOG FILES FROM TAPE TO ***
197 // *** DISK NOT EXECUTED. ***
198 // *** TAPE DAMAGED OR FILES NOT AVAILABLE. ***
199 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
200 // *** ***

MMN:SW-COFIP-8 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

REC51

201 // *** START COMMAND FILE CG.SA.REC51 AGAIN. ***

202 // **********************************************
203 /
204 <SETCFOPT:OFF=1&&14&16,ON=15,SCOPE=GLOBAL;
205 <SKIPCMD:LABEL=END;
206 /
207 .OUT <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
208 /
209 // *******************************
210 // *** FINISHED WITHOUT FAULTS ***
211 // *******************************
212 // *******************************
213 // *** CONTINUE THE PROCEDURE. ***
214 // *******************************
215 /
216 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
217 <SKIPCMD:LABEL=END;
218 /
219 .OUT1 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
220 /
221 // *******************************
222 // *** FINISHED WITHOUT FAULTS ***
223 // *******************************
224 // **************************************************
225 // *** IF, ACCORDING TO THE PRINTOUT, ONE OR MORE ***
226 // *** MML-COMMAND(S) WAS (WERE) NOT EXECUTED, ***
227 // *** FIND CAUSE AND ELIMINATE FAULTS. ***
228 // *** ***
229 // *** CONTINUE THE PROCEDURE. ***
230 // **************************************************
231 /
232 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
233 <SKIPCMD:LABEL=END;
234 /
235 .END <SETCFOPT:ACKCFS=ERROR,DANCMD=NOEXEC,ACKREQ=NEG,SCOPE=GLOBAL;
236 <ENDFILE;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-9
MMN:SW Maintenance
Software

REC52

1 <CMDFILE;
2 /
3 // 80-REC52-01
4 /
5 /****V01***************************************************************
6 /* *
7 /* COMMAND FILE CG.SA.REC52 FOR RECOVERY FROM SAVE TAPE *
8 /* ==================================================== *
9 /* *
10 /* TASK DESCRIPTION: *
11 /* ----------------- *
12 /* - UPDATING THE DATABASE FROM THE APS ROUTINE SAVE TAPE *
13 /* *
14 /* FAULT HANDLING: *
15 /* ----------------- *
16 /* - AFTER INTERRUPTION OF THE FILE PROCESSING VIA FAULT *
17 /* EXITS AND CORRESPONDING FAULT HANDLING THE FILE CAN *
18 /* BE STARTED AGAIN *
19 /* *
20 /* SWITCH PRESETTINGS FOR START POINTS AND ENTRY POINTS: *
21 /* ===================================================== *
22 /* START POINT SWITCH PRESETTINGS *
23 /* ----------- ------------------ *
24 /* AFTER 1.SAVING SETCFOPT:OFF=1&&11&13&&16,ON=12; *
25 /* AFTER 2.SAVING SETCFOPT:OFF=1&&12&14&&16,ON=13; *
26 /* AFTER 3.SAVING SETCFOPT:OFF=1&&13&15&16,ON=14; *
27 /* AFTER 4.SAVING SETCFOPT:OFF=1&&14&16,ON=15; *
28 /* AFTER 5.SAVING SETCFOPT:OFF=1&&15,ON=16; *
29 /* *
30 /* ENTRY POINT SWITCH PRESETTINGS *
31 /* ----------- ------------------ *
32 /* FAULT 01,02 SETCFOPT:OFF=1&&11,SCOPE=GLOBAL; *
33 /* *
34 /**********************************************************************
35 /
36 <SETCFOPT:ACKCFS=ERROR,DANCMD=EXEC,ACKREQ=POS,SCOPE=GLOBAL;
37 /
38 <SKIPCMD:LABEL=END,ON=1;
39 /
40 .M1 <STEP;
41 //
42 // ********************************************
43 // * TRANSFERRING LOG FILES FROM TAPE TO DISK *
44 // ********************************************
45 /
46 <DACT FNS:FNS=LG;
47 <TRANS FILE:FILE=TMP.LG./LG.,VSNS=LOGTAP,COPMOD=CHAR;
48 <SKIPCMD:LABEL=AB1,ON=32;
49 <ACT FNS:FNS=LG;
50 /

MMN:SW-COFIP-10 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

REC52

51 <DISP FILE:FILE=LQ.;
52 <SKIPCMD:LABEL=M2,ON=32;
53 <DACT FNS:FNS=LQ;
54 <TRANS FILE:FILE=TMP.LQ./LQ.,VSNS=LOGTAP,COPMOD=BIN;
55 <SKIPCMD:LABEL=AB1,ON=32;
56 <ACT FNS:FNS=LQ;
57 /
58 .M2 <STEP;
59 //
60 // *********************************
61 // * UPDATING THE DATABASE STARTED *
62 // *********************************
63 /
64 <SKIPCMD:LABEL=T21,ON=12;
65 <SKIPCMD:LABEL=T22,ON=13;
66 <SKIPCMD:LABEL=T23,ON=14;
67 <SKIPCMD:LABEL=T24,ON=15;
68 <SKIPCMD:LABEL=T25,ON=16;
69 /
70 .T21 <DISP FILE:FILE=TMP.LG.LOG1.A1;
71 <SKIPCMD:LABEL=AB2,ON=32;
72 /
73 .T211 <EXEC CMDFILE:FILE=TMP.LG.LOG1.A1;
74 <DISP FILE:FILE=TMP.LG.LOG1.A2;
75 <SKIPCMD:LABEL=T212,ON=32;
76 <EXEC CMDFILE:FILE=TMP.LG.LOG1.A2;
77 <DISP FILE:FILE=TMP.LG.LOG1.A3;
78 <SKIPCMD:LABEL=T212,ON=32;
79 <EXEC CMDFILE:FILE=TMP.LG.LOG1.A3;
80 /
81 .T212 <DEL FILE:FILE=TMP.LG.LOG1.;
82 <DEL FILE:FILE=TMP.LQ.LOG1.;
83 <STEP;
84 /
85 <SKIPCMD:LABEL=M3;
86 /
87 .T22 <DISP FILE:FILE=TMP.LG.LOG1.A1;
88 <SKIPCMD:LABEL=AB2,ON=32;
89 /
90 <DISP FILE:FILE=TMP.LG.LOG2.A1;
91 <SKIPCMD:LABEL=AB2,ON=32;
92 /
93 .T221 <EXEC CMDFILE:FILE=TMP.LG.LOG1.A1;
94 <DISP FILE:FILE=TMP.LG.LOG1.A2;
95 <SKIPCMD:LABEL=T222,ON=32;
96 <EXEC CMDFILE:FILE=TMP.LG.LOG1.A2;
97 <DISP FILE:FILE=TMP.LG.LOG1.A3;
98 <SKIPCMD:LABEL=T222,ON=32;
99 <EXEC CMDFILE:FILE=TMP.LG.LOG1.A3;
100 /

A30808-X3080-C485-5-7620 MMN:SW-COFIP-11
MMN:SW Maintenance
Software

REC52

101 .T222 <EXEC CMDFILE:FILE=TMP.LG.LOG2.A1;

102 <DISP FILE:FILE=TMP.LG.LOG2.A2;
103 <SKIPCMD:LABEL=T223,ON=32;
104 <EXEC CMDFILE:FILE=TMP.LG.LOG2.A2;
105 <DISP FILE:FILE=TMP.LG.LOG2.A3;
106 <SKIPCMD:LABEL=T223,ON=32;
107 <EXEC CMDFILE:FILE=TMP.LG.LOG2.A3;
108 /
109 .T223 <DEL FILE:FILE=TMP.LG.LOG1.;
110 <DEL FILE:FILE=TMP.LQ.LOG1.;
111 <STEP;
112 <DEL FILE:FILE=TMP.LG.LOG2.;
113 <DEL FILE:FILE=TMP.LQ.LOG2.;
114 <STEP;
115 /
116 <SKIPCMD:LABEL=M3;
117 /
118 .T23 <DISP FILE:FILE=TMP.LG.LOG1.A1;
119 <SKIPCMD:LABEL=AB2,ON=32;
120 /
121 <DISP FILE:FILE=TMP.LG.LOG2.A1;
122 <SKIPCMD:LABEL=AB2,ON=32;
123 /
124 <DISP FILE:FILE=TMP.LG.LOG3.A1;
125 <SKIPCMD:LABEL=AB2,ON=32;
126 /
127 .T231 <EXEC CMDFILE:FILE=TMP.LG.LOG1.A1;
128 <DISP FILE:FILE=TMP.LG.LOG1.A2;
129 <SKIPCMD:LABEL=T232,ON=32;
130 <EXEC CMDFILE:FILE=TMP.LG.LOG1.A2;
131 <DISP FILE:FILE=TMP.LG.LOG1.A3;
132 <SKIPCMD:LABEL=T232,ON=32;
133 <EXEC CMDFILE:FILE=TMP.LG.LOG1.A3;
134 /
135 .T232 <EXEC CMDFILE:FILE=TMP.LG.LOG2.A1;
136 <DISP FILE:FILE=TMP.LG.LOG2.A2;
137 <SKIPCMD:LABEL=T233,ON=32;
138 <EXEC CMDFILE:FILE=TMP.LG.LOG2.A2;
139 <DISP FILE:FILE=TMP.LG.LOG2.A3;
140 <SKIPCMD:LABEL=T233,ON=32;
141 <EXEC CMDFILE:FILE=TMP.LG.LOG2.A3;
142 /
143 .T233 <EXEC CMDFILE:FILE=TMP.LG.LOG3.A1;
144 <DISP FILE:FILE=TMP.LG.LOG3.A2;
145 <SKIPCMD:LABEL=T234,ON=32;
146 <EXEC CMDFILE:FILE=TMP.LG.LOG3.A2;
147 <DISP FILE:FILE=TMP.LG.LOG3.A3;
148 <SKIPCMD:LABEL=T234,ON=32;
149 <EXEC CMDFILE:FILE=TMP.LG.LOG3.A3;
150 /

MMN:SW-COFIP-12 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

REC52

151 .T234 <DEL FILE:FILE=TMP.LG.LOG1.;

152 <DEL FILE:FILE=TMP.LQ.LOG1.;
153 <STEP;
154 <DEL FILE:FILE=TMP.LG.LOG2.;
155 <DEL FILE:FILE=TMP.LQ.LOG2.;
156 <STEP;
157 <DEL FILE:FILE=TMP.LG.LOG3.;
158 <DEL FILE:FILE=TMP.LQ.LOG3.;
159 <STEP;
160 /
161 <SKIPCMD:LABEL=M3;
162 /
163 .T24 <DISP FILE:FILE=TMP.LG.LOG1.A1;
164 <SKIPCMD:LABEL=AB2,ON=32;
165 /
166 <DISP FILE:FILE=TMP.LG.LOG2.A1;
167 <SKIPCMD:LABEL=AB2,ON=32;
168 /
169 <DISP FILE:FILE=TMP.LG.LOG3.A1;
170 <SKIPCMD:LABEL=AB2,ON=32;
171 /
172 <DISP FILE:FILE=TMP.LG.LOG4.A1;
173 <SKIPCMD:LABEL=AB2,ON=32;
174 /
175 .T241 <EXEC CMDFILE:FILE=TMP.LG.LOG1.A1;
176 <DISP FILE:FILE=TMP.LG.LOG1.A2;
177 <SKIPCMD:LABEL=T242,ON=32;
178 <EXEC CMDFILE:FILE=TMP.LG.LOG1.A2;
179 <DISP FILE:FILE=TMP.LG.LOG1.A3;
180 <SKIPCMD:LABEL=T242,ON=32;
181 <EXEC CMDFILE:FILE=TMP.LG.LOG1.A3;
182 /
183 .T242 <EXEC CMDFILE:FILE=TMP.LG.LOG2.A1;
184 <DISP FILE:FILE=TMP.LG.LOG2.A2;
185 <SKIPCMD:LABEL=T243,ON=32;
186 <EXEC CMDFILE:FILE=TMP.LG.LOG2.A2;
187 <DISP FILE:FILE=TMP.LG.LOG2.A3;
188 <SKIPCMD:LABEL=T243,ON=32;
189 <EXEC CMDFILE:FILE=TMP.LG.LOG2.A3;
190 /
191 .T243 <EXEC CMDFILE:FILE=TMP.LG.LOG3.A1;
192 <DISP FILE:FILE=TMP.LG.LOG3.A2;
193 <SKIPCMD:LABEL=T244,ON=32;
194 <EXEC CMDFILE:FILE=TMP.LG.LOG3.A2;
195 <DISP FILE:FILE=TMP.LG.LOG3.A3;
196 <SKIPCMD:LABEL=T244,ON=32;
197 <EXEC CMDFILE:FILE=TMP.LG.LOG3.A3;
198 /
199 .T244 <EXEC CMDFILE:FILE=TMP.LG.LOG4.A1;
200 <DISP FILE:FILE=TMP.LG.LOG4.A2;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-13
MMN:SW Maintenance
Software

REC52

201 <SKIPCMD:LABEL=T245,ON=32;
202 <EXEC CMDFILE:FILE=TMP.LG.LOG4.A2;
203 <DISP FILE:FILE=TMP.LG.LOG4.A3;
204 <SKIPCMD:LABEL=T245,ON=32;
205 <EXEC CMDFILE:FILE=TMP.LG.LOG4.A3;
206 /
207 .T245 <DEL FILE:FILE=TMP.LG.LOG1.;
208 <DEL FILE:FILE=TMP.LQ.LOG1.;
209 <STEP;
210 <DEL FILE:FILE=TMP.LG.LOG2.;
211 <DEL FILE:FILE=TMP.LQ.LOG2.;
212 <STEP;
213 <DEL FILE:FILE=TMP.LG.LOG3.;
214 <DEL FILE:FILE=TMP.LQ.LOG3.;
215 <STEP;
216 <DEL FILE:FILE=TMP.LG.LOG4.;
217 <DEL FILE:FILE=TMP.LQ.LOG4.;
218 <STEP;
219 /
220 <SKIPCMD:LABEL=M3;
221 /
222 .T25 <DISP FILE:FILE=TMP.LG.LOG1.A1;
223 <SKIPCMD:LABEL=AB2,ON=32;
224 /
225 <DISP FILE:FILE=TMP.LG.LOG2.A1;
226 <SKIPCMD:LABEL=AB2,ON=32;
227 /
228 <DISP FILE:FILE=TMP.LG.LOG3.A1;
229 <SKIPCMD:LABEL=AB2,ON=32;
230 /
231 <DISP FILE:FILE=TMP.LG.LOG4.A1;
232 <SKIPCMD:LABEL=AB2,ON=32;
233 /
234 <DISP FILE:FILE=TMP.LG.LOG5.A1;
235 <SKIPCMD:LABEL=AB2,ON=32;
236 /
237 .T251 <EXEC CMDFILE:FILE=TMP.LG.LOG1.A1;
238 <DISP FILE:FILE=TMP.LG.LOG1.A2;
239 <SKIPCMD:LABEL=T252,ON=32;
240 <EXEC CMDFILE:FILE=TMP.LG.LOG1.A2;
241 <DISP FILE:FILE=TMP.LG.LOG1.A3;
242 <SKIPCMD:LABEL=T252,ON=32;
243 <EXEC CMDFILE:FILE=TMP.LG.LOG1.A3;
244 /
245 .T252 <EXEC CMDFILE:FILE=TMP.LG.LOG2.A1;
246 <DISP FILE:FILE=TMP.LG.LOG2.A2;
247 <SKIPCMD:LABEL=T253,ON=32;
248 <EXEC CMDFILE:FILE=TMP.LG.LOG2.A2;
249 <DISP FILE:FILE=TMP.LG.LOG2.A3;
250 <SKIPCMD:LABEL=T253,ON=32;

MMN:SW-COFIP-14 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

REC52

251 <EXEC CMDFILE:FILE=TMP.LG.LOG2.A3;

252 /
253 .T253 <EXEC CMDFILE:FILE=TMP.LG.LOG3.A1;
254 <DISP FILE:FILE=TMP.LG.LOG3.A2;
255 <SKIPCMD:LABEL=T254,ON=32;
256 <EXEC CMDFILE:FILE=TMP.LG.LOG3.A2;
257 <DISP FILE:FILE=TMP.LG.LOG3.A3;
258 <SKIPCMD:LABEL=T254,ON=32;
259 <EXEC CMDFILE:FILE=TMP.LG.LOG3.A3;
260 /
261 .T254 <EXEC CMDFILE:FILE=TMP.LG.LOG4.A1;
262 <DISP FILE:FILE=TMP.LG.LOG4.A2;
263 <SKIPCMD:LABEL=T255,ON=32;
264 <EXEC CMDFILE:FILE=TMP.LG.LOG4.A2;
265 <DISP FILE:FILE=TMP.LG.LOG4.A3;
266 <SKIPCMD:LABEL=T255,ON=32;
267 <EXEC CMDFILE:FILE=TMP.LG.LOG4.A3;
268 /
269 .T255 <EXEC CMDFILE:FILE=TMP.LG.LOG5.A1;
270 <DISP FILE:FILE=TMP.LG.LOG5.A2;
271 <SKIPCMD:LABEL=T256,ON=32;
272 <EXEC CMDFILE:FILE=TMP.LG.LOG5.A2;
273 <DISP FILE:FILE=TMP.LG.LOG5.A3;
274 <SKIPCMD:LABEL=T256,ON=32;
275 <EXEC CMDFILE:FILE=TMP.LG.LOG5.A3;
276 /
277 .T256 <DEL FILE:FILE=TMP.LG.LOG1.;
278 <DEL FILE:FILE=TMP.LQ.LOG1.;
279 <STEP;
280 <DEL FILE:FILE=TMP.LG.LOG2.;
281 <DEL FILE:FILE=TMP.LQ.LOG2.;
282 <STEP;
283 <DEL FILE:FILE=TMP.LG.LOG3.;
284 <DEL FILE:FILE=TMP.LQ.LOG3.;
285 <STEP;
286 <DEL FILE:FILE=TMP.LG.LOG4.;
287 <DEL FILE:FILE=TMP.LQ.LOG4.;
288 <STEP;
289 <DEL FILE:FILE=TMP.LG.LOG5.;
290 <DEL FILE:FILE=TMP.LQ.LOG5.;
291 <STEP;
292 /
293 .M3 <STEP;
294 //
295 // *******************************
296 // * UPDATING THE DATABASE ENDED *
297 // *******************************
298 /
299 <SKIPCMD:LABEL=OUT;
300 / *******************************

A30808-X3080-C485-5-7620 MMN:SW-COFIP-15
MMN:SW Maintenance
Software

REC52

301 / * FAULT EXITS AND END MESSAGE *

302 / *******************************
303 /
304 .AB1 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
305 // ****************
306 // *** FAULT 01 ***
307 // ****************
308 // **********************************************
309 // *** TRANSFERRING LOG FILES FROM TAPE TO ***
310 // *** DISK NOT EXECUTED. ***
311 // *** TAPE DAMAGED OR FILES NOT AVAILABLE. ***
312 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
313 // *** ***
314 // *** START COMMAND FILE CG.SA.REC52 AGAIN. ***
315 // **********************************************
316 /
317 <ACT FNS:FNS=LG;
318 <ACT FNS:FNS=LQ;
319 <STEP;
320 /
321 <SETCFOPT:OFF=1&&11,SCOPE=GLOBAL;
322 <SKIPCMD:LABEL=END;
323 /
324 .AB2 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
325 // ****************
326 // *** FAULT 02 ***
327 // ****************
328 // *****************************************************
329 // *** ONE OR MORE OF THE LOG FILES WHICH, ACCORDING ***
330 // *** TO THE SAVING CONCEPT, SHOULD BE ON THE APS ***
331 // *** ROUTINE SAVE TAPE NOT PRESENT. ***
332 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
333 // *** ***
334 // *** START COMMAND FILE CG.SA.REC52 AGAIN. ***
335 // *****************************************************
336 /
337 <DEL FILE:FILE=TMP.LG.;
338 /
339 <DEL FILE:FILE=TMP.LQ.;
340 <STEP;
341 /
342 <SETCFOPT:OFF=1&&11,SCOPE=GLOBAL;
343 <SKIPCMD:LABEL=END;
344 /
345 .OUT <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
346 /
347 // *******************************
348 // *** FINISHED WITHOUT FAULTS ***
349 // *******************************
350 // **************************************************

MMN:SW-COFIP-16 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

REC52

351 // *** IF, ACCORDING TO THE PRINTOUT, ONE OR MORE ***

352 // *** MML-COMMAND(S) WAS (WERE) NOT EXECUTED, ***
353 // *** FIND CAUSE AND ELIMINATE FAULTS. ***
354 // *** ***
355 // *** CONTINUE THE PROCEDURE. ***
356 // **************************************************
357 /
358 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
359 <SKIPCMD:LABEL=END;
360 /
361 .END <SETCFOPT:ACKCFS=ERROR,DANCMD=NOEXEC,ACKREQ=NEG,SCOPE=GLOBAL;
362 <ENDFILE;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-17
MMN:SW Maintenance
Software

REC53

1 <CMDFILE;
2 /
3 // 80-REC53-01
4 /
5 /****V01***************************************************************
6 /* *
7 /* COMMAND FILE CG.SA.REC53 FOR RECOVERY FROM SAVE MEDIUM *
8 /* ====================================================== *
9 /* *
10 /* TASK DESCRIPTION: *
11 /* ----------------- *
12 /* - POSTPROCESSING AND TEST AFTER RECOVERY FROM SAVE MEDIUM *
13 /* *
14 /* SWITCH PRESETTINGS FOR START POINTS AND ENTRY POINTS: *
15 /* ===================================================== *
16 /* START POINT SWITCH PRESETTINGS *
17 /* ----------- ------------------ *
18 /* RESETCFOPT; *
19 /* *
20 /**********************************************************************
21 /
22 <SETCFOPT:ACKCFS=ERROR,DANCMD=EXEC,ACKREQ=POS,SCOPE=GLOBAL;
23 /
24 <SKIPCMD:LABEL=END,ON=1;
25 /
26 .M1 <STEP;
27 //
28 // **********************************
29 // * INTERROGATION OF CONFIGURATION *
30 // **********************************
31 /
32 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
33 <STAT SN;
34 <STAT MB;
35 <STAT CCG;
36 <STAT SYP;
37 <STAT LTG:LTG=X-X;
38 <STAT DLU:DLU=X;
39 /
40 <STAT SSP;
41 /
42 <DISP TSG:SN=X;
43 /
44 <STAT DIU:LTG=X-X,OST=UNA;
45 <STAT CR:LTG=X-X,OST=UNA;
46 /
47 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
48 <DISP MUX;
49 <SKIPCMD:LABEL=M2,ON=32;
50 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;

MMN:SW-COFIP-18 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

REC53

51 <STAT CCNC:UNIT=CCNP-X;
52 <STAT CCNC:UNIT=MUXM-X;
53 <DISP C7LINK:LINKNO=X;
54 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
55 /
56 .M2 <STEP;
57 //
58 // ****************************
59 // * CHECKING CATALOG ENTRIES *
60 // ****************************
61 /
62 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
63 <DISP FILE;
64 <DISP MD;
65 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
66 /
67 <SKIPCMD:LABEL=OUT;
68 / ***************
69 / * END MESSAGE *
70 / ***************
71 /
72 .OUT <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
73 /
74 // *******************************
75 // *** FINISHED WITHOUT FAULTS ***
76 // *******************************
77 // ******************************************************
78 // *** IF THE DESIRED CONFIGURATION WAS NOT ACHIEVED, ***
79 // *** FAULT CLEARANCE MUST BE PERFORMED AFTER ***
80 // *** TERMINATION OF THE PROCEDURE. ***
81 // *** ***
82 // *** CONTINUE WITH PROCEDURE. ***
83 // ******************************************************
84 /
85 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
86 /
87 .END <SETCFOPT:ACKCFS=ERROR,DANCMD=NOEXEC,ACKREQ=NEG,SCOPE=GLOBAL;
88 <ENDFILE;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-19
MMN:SW Maintenance
Software

REC54

1 <CMDFILE;
2 /
3 // 80-REC54-05
4 /
5 /****V05***************************************************************
6 /* *
7 /* COMMAND FILE CG.SA.REC54 FOR RECOVERY FROM SAVE MO *
8 /* ================================================== *
9 /* *
10 /* TASK DESCRIPTION: *
11 /* ----------------- *
12 /* - OPENING LOG FUNCTION *
13 /* - UPDATING THE DATABASE FROM THE LOG FILE SAVE MO (EY171) *
14 /* *
15 /* FAULT HANDLING: *
16 /* ----------------- *
17 /* - AFTER INTERRUPTION OF THE FILE PROCESSING VIA FAULT *
18 /* EXITS AND CORRESPONDING FAULT HANDLING THE FILE CAN *
19 /* BE STARTED AGAIN *
20 /* *
21 /* SWITCH PRESETTINGS FOR START POINTS AND ENTRY POINTS: *
22 /* ===================================================== *
23 /* START POINT SWITCH PRESETTINGS *
24 /* ----------- ------------------ *
25 /* 1. START: *
26 /* ACTIVATION LOG FUNCTION RESETCFOPT; *
27 /* 2. START: *
28 /* LOADING LOG FILES SETCFOPT:OFF=1&&14&16,ON=15; *
29 /* 3. START: *
30 /* ACTUALIZATION LOG FILES SETCFOPT:OFF=1&&15,ON=16; *
31 /* *
32 /* ENTRY POINT SWITCH PRESETTINGS *
33 /* ----------- ------------------ *
34 /* FAULT 01 SETCFOPT:OFF=1&&14&16,ON=15,SCOPE=GLOBAL; *
35 /* *
36 /**********************************************************************
37 /
38 /
39 <SETCFOPT:ACKCFS=ERROR,DANCMD=EXEC,ACKREQ=POS,SCOPE=GLOBAL;
40 /
41 <SKIPCMD:LABEL=END,ON=1;
42 <SKIPCMD:LABEL=M3,ON=15;
43 <SKIPCMD:LABEL=M4,ON=16;
44 /
45 .M1 <STEP;
46 //
47 // *****************************
48 // * DEACTIVATING LOG-FUNCTION *
49 // *****************************
50 /

MMN:SW-COFIP-20 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

REC54

51 <RSET LOG;
52 /
53 .M2 <STEP;
54 //
55 // ***************************
56 // * ACTIVATING LOG-FUNCTION *
57 // ***************************
58 /
59 <SET LOG:FILE=LOG6,SIZE=24,ERASE=YES;
60 <SKIPCMD:LABEL=AB1,ON=32;
61 <SKIPCMD:LABEL=OUT;
62 /
63 .M3 <STEP;
64 //
65 // ******************************************
66 // * TRANSFERRING LOG FILES FROM MO TO DISK *
67 // ******************************************
68 /
69 <TRANS FILE:FILE=ACT.LG./LG.,VSNS=RESMOD,COPMOD=CHAR;
70 <SKIPCMD:LABEL=AB2,ON=32;
71 /
72 <DISP FILE:FILE=LQ.;
73 <SKIPCMD:LABEL=T3,ON=32;
74 <TRANS FILE:FILE=ACT.LQ./LQ.,VSNS=RESMOD,COPMOD=BIN;
75 <SKIPCMD:LABEL=AB2,ON=32;
76 /
77 .T3 <SKIPCMD:LABEL=OUT;
78 /
79 .M4 <STEP;
80 //
81 // *********************************
82 // * UPDATING THE DATABASE STARTED *
83 // *********************************
84 /
85 .T41 <DISP FILE:FILE=ACT.LG.LOG6.;
86 <SKIPCMD:LABEL=T42,ON=32;
87 /
88 <EXEC CMDFILE:FILE=ACT.LG.LOG6.A1;
89 <DISP FILE:FILE=ACT.LG.LOG6.A2;
90 <SKIPCMD:LABEL=T411,ON=32;
91 <EXEC CMDFILE:FILE=ACT.LG.LOG6.A2;
92 <DISP FILE:FILE=ACT.LG.LOG6.A3;
93 <SKIPCMD:LABEL=T411,ON=32;
94 <EXEC CMDFILE:FILE=ACT.LG.LOG6.A3;
95 /
96 .T411 <DEL FILE:FILE=ACT.LG.LOG6.;
97 <DEL FILE:FILE=ACT.LQ.LOG6.;
98 <STEP;
99 /
100 .T413 <SKIPCMD:LABEL=M5;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-21
MMN:SW Maintenance
Software

REC54

101 /
102 .T42 <DISP FILE:FILE=ACT.LG.LOG5.;
103 <SKIPCMD:LABEL=T43,ON=32;
104 /
105 <EXEC CMDFILE:FILE=ACT.LG.LOG5.A1;
106 <DISP FILE:FILE=ACT.LG.LOG5.A2;
107 <SKIPCMD:LABEL=T421,ON=32;
108 <EXEC CMDFILE:FILE=ACT.LG.LOG5.A2;
109 <DISP FILE:FILE=ACT.LG.LOG5.A3;
110 <SKIPCMD:LABEL=T421,ON=32;
111 <EXEC CMDFILE:FILE=ACT.LG.LOG5.A3;
112 /
113 .T421 <DEL FILE:FILE=ACT.LG.LOG5.;
114 <DEL FILE:FILE=ACT.LQ.LOG5.;
115 <STEP;
116 /
117 .T423 <SKIPCMD:LABEL=M5;
118 /
119 .T43 <DISP FILE:FILE=ACT.LG.LOG4.;
120 <SKIPCMD:LABEL=T44,ON=32;
121 /
122 <EXEC CMDFILE:FILE=ACT.LG.LOG4.A1;
123 <DISP FILE:FILE=ACT.LG.LOG4.A2;
124 <SKIPCMD:LABEL=T431,ON=32;
125 <EXEC CMDFILE:FILE=ACT.LG.LOG4.A2;
126 <DISP FILE:FILE=ACT.LG.LOG4.A3;
127 <SKIPCMD:LABEL=T431,ON=32;
128 <EXEC CMDFILE:FILE=ACT.LG.LOG4.A3;
129 /
130 .T431 <DEL FILE:FILE=ACT.LG.LOG4.;
131 <DEL FILE:FILE=ACT.LQ.LOG4.;
132 <STEP;
133 /
134 .T433 <SKIPCMD:LABEL=M5;
135 /
136 .T44 <DISP FILE:FILE=ACT.LG.LOG3.;
137 <SKIPCMD:LABEL=T45,ON=32;
138 /
139 <EXEC CMDFILE:FILE=ACT.LG.LOG3.A1;
140 <DISP FILE:FILE=ACT.LG.LOG3.A2;
141 <SKIPCMD:LABEL=T441,ON=32;
142 <EXEC CMDFILE:FILE=ACT.LG.LOG3.A2;
143 <DISP FILE:FILE=ACT.LG.LOG3.A3;
144 <SKIPCMD:LABEL=T441,ON=32;
145 <EXEC CMDFILE:FILE=ACT.LG.LOG3.A3;
146 /
147 .T441 <DEL FILE:FILE=ACT.LG.LOG3.;
148 <DEL FILE:FILE=ACT.LQ.LOG3.;
149 <STEP;
150 /

MMN:SW-COFIP-22 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

REC54

151 .T443 <SKIPCMD:LABEL=M5;

152 /
153 .T45 <DISP FILE:FILE=ACT.LG.LOG2.;
154 <SKIPCMD:LABEL=T46,ON=32;
155 /
156 <EXEC CMDFILE:FILE=ACT.LG.LOG2.A1;
157 <DISP FILE:FILE=ACT.LG.LOG2.A2;
158 <SKIPCMD:LABEL=T451,ON=32;
159 <EXEC CMDFILE:FILE=ACT.LG.LOG2.A2;
160 <DISP FILE:FILE=ACT.LG.LOG2.A3;
161 <SKIPCMD:LABEL=T451,ON=32;
162 <EXEC CMDFILE:FILE=ACT.LG.LOG2.A3;
163 /
164 .T451 <DEL FILE:FILE=ACT.LG.LOG2.;
165 <DEL FILE:FILE=ACT.LQ.LOG2.;
166 <STEP;
167 /
168 .T453 <SKIPCMD:LABEL=M5;
169 /
170 .T46 <EXEC CMDFILE:FILE=ACT.LG.LOG1.A1;
171 <DISP FILE:FILE=ACT.LG.LOG1.A2;
172 <SKIPCMD:LABEL=T461,ON=32;
173 <EXEC CMDFILE:FILE=ACT.LG.LOG1.A2;
174 <DISP FILE:FILE=ACT.LG.LOG1.A2;
175 <SKIPCMD:LABEL=T461,ON=32;
176 <EXEC CMDFILE:FILE=ACT.LG.LOG1.A3;
177 /
178 .T461 <DEL FILE:FILE=ACT.LG.LOG1.;
179 <DEL FILE:FILE=ACT.LQ.LOG1.;
180 <STEP;
181 /
182 .M5 <STEP;
183 //
184 // *******************************
185 // * UPDATING THE DATABASE ENDED *
186 // *******************************
187 /
188 <SKIPCMD:LABEL=OUT1;
189 / *******************************
190 / * FAULT EXITS AND END MESSAGE *
191 / *******************************
192 /
193 .AB1 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
194 // ****************
195 // *** FAULT 01 ***
196 // ****************
197 // **********************************************
198 // *** ACTIVATING LOG-FUNCTION ***
199 // *** NOT EXECUTED. ***
200 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***

A30808-X3080-C485-5-7620 MMN:SW-COFIP-23
MMN:SW Maintenance
Software

REC54

201 // *** ***

202 // *** START COMMAND FILE CG.SA.REC54 AGAIN. ***
203 // **********************************************
204 /
205 /
206 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
207 <SKIPCMD:LABEL=END;
208 /
209 .AB2 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
210 // ****************
211 // *** FAULT 02 ***
212 // ****************
213 // **********************************************
214 // *** TRANSFERRING LOG FILES FROM MO TO ***
215 // *** DISK NOT EXECUTED. ***
216 // *** MO DAMAGED OR MOD STATION DEFECTIVE ***
217 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
218 // *** ***
219 // *** START COMMAND FILE CG.SA.REC54 AGAIN. ***
220 // **********************************************
221 /
222 <SETCFOPT:OFF=1&&14&16,ON=15,SCOPE=GLOBAL;
223 <SKIPCMD:LABEL=END;
224 /
225 .OUT <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
226 /
227 // *******************************
228 // *** FINISHED WITHOUT FAULTS ***
229 // *******************************
230 // *******************************
231 // *** CONTINUE THE PROCEDURE. ***
232 // *******************************
233 /
234 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
235 <SKIPCMD:LABEL=END;
236 /
237 .OUT1 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
238 /
239 // *******************************
240 // *** FINISHED WITHOUT FAULTS ***
241 // *******************************
242 // **************************************************
243 // *** IF, ACCORDING TO THE PRINTOUT, ONE OR MORE ***
244 // *** MML-COMMAND(S) WAS (WERE) NOT EXECUTED, ***
245 // *** FIND CAUSE AND ELIMINATE FAULTS. ***
246 // *** ***
247 // *** CONTINUE THE PROCEDURE. ***
248 // **************************************************
249 /
250 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;

MMN:SW-COFIP-24 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

REC54

251 <SKIPCMD:LABEL=END;
252 /
253 .END <SETCFOPT:ACKCFS=ERROR,DANCMD=NOEXEC,ACKREQ=NEG,SCOPE=GLOBAL;
254 <ENDFILE;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-25
MMN:SW Maintenance
Software

REC55

1 <CMDFILE;
2 /
3 // 80-REC55-01
4 /
5 /****V01***************************************************************
6 /* *
7 /* COMMAND FILE CG.SA.REC55 FOR RECOVERY FROM SAVE MO *
8 /* ================================================== *
9 /* *
10 /* TASK DESCRIPTION: *
11 /* ----------------- *
12 /* - UPDATING THE DATABASE FROM THE APS ROUTINE SAVE MO *
13 /* *
14 /* FAULT HANDLING: *
15 /* ----------------- *
16 /* - AFTER INTERRUPTION OF THE FILE PROCESSING VIA FAULT *
17 /* EXITS AND CORRESPONDING FAULT HANDLING THE FILE CAN *
18 /* BE STARTED AGAIN *
19 /* *
20 /* SWITCH PRESETTINGS FOR START POINTS AND ENTRY POINTS: *
21 /* ===================================================== *
22 /* START POINT SWITCH PRESETTINGS *
23 /* ----------- ------------------ *
24 /* AFTER 1.SAVING SETCFOPT:OFF=1&&11&13&&16,ON=12; *
25 /* AFTER 2.SAVING SETCFOPT:OFF=1&&12&14&&16,ON=13; *
26 /* AFTER 3.SAVING SETCFOPT:OFF=1&&13&15&16,ON=14; *
27 /* AFTER 4.SAVING SETCFOPT:OFF=1&&14&16,ON=15; *
28 /* AFTER 5.SAVING SETCFOPT:OFF=1&&15,ON=16; *
29 /* *
30 /* ENTRY POINT SWITCH PRESETTINGS *
31 /* ----------- ------------------ *
32 /* FAULT 01,02 SETCFOPT:OFF=1&&11,SCOPE=GLOBAL; *
33 /* *
34 /**********************************************************************
35 /
36 <SETCFOPT:ACKCFS=ERROR,DANCMD=EXEC,ACKREQ=POS,SCOPE=GLOBAL;
37 /
38 <SKIPCMD:LABEL=END,ON=1;
39 /
40 .M1 <STEP;
41 //
42 // ******************************************
43 // * TRANSFERRING LOG FILES FROM TAPE TO MO *
44 // ******************************************
45 /
46 <DACT FNS:FNS=LG;
47 <TRANS FILE:FILE=TMP.LG./LG.,VSNS=LOGMOD,COPMOD=CHAR;
48 <SKIPCMD:LABEL=AB1,ON=32;
49 <ACT FNS:FNS=LG;
50 /

MMN:SW-COFIP-26 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

REC55

51 <DISP FILE:FILE=LQ.;
52 <SKIPCMD:LABEL=M2,ON=32;
53 <DACT FNS:FNS=LQ;
54 <TRANS FILE:FILE=TMP.LQ./LQ.,VSNS=LOGMOD,COPMOD=BIN;
55 <SKIPCMD:LABEL=AB1,ON=32;
56 <ACT FNS:FNS=LQ;
57 /
58 .M2 <STEP;
59 //
60 // *********************************
61 // * UPDATING THE DATABASE STARTED *
62 // *********************************
63 /
64 <SKIPCMD:LABEL=T21,ON=12;
65 <SKIPCMD:LABEL=T22,ON=13;
66 <SKIPCMD:LABEL=T23,ON=14;
67 <SKIPCMD:LABEL=T24,ON=15;
68 <SKIPCMD:LABEL=T25,ON=16;
69 /
70 .T21 <DISP FILE:FILE=TMP.LG.LOG1.A1;
71 <SKIPCMD:LABEL=AB2,ON=32;
72 /
73 .T211 <EXEC CMDFILE:FILE=TMP.LG.LOG1.A1;
74 <DISP FILE:FILE=TMP.LG.LOG1.A2;
75 <SKIPCMD:LABEL=T212,ON=32;
76 <EXEC CMDFILE:FILE=TMP.LG.LOG1.A2;
77 <DISP FILE:FILE=TMP.LG.LOG1.A3;
78 <SKIPCMD:LABEL=T212,ON=32;
79 <EXEC CMDFILE:FILE=TMP.LG.LOG1.A3;
80 /
81 .T212 <DEL FILE:FILE=TMP.LG.LOG1.;
82 <DEL FILE:FILE=TMP.LQ.LOG1.;
83 <STEP;
84 /
85 <SKIPCMD:LABEL=M3;
86 /
87 .T22 <DISP FILE:FILE=TMP.LG.LOG1.A1;
88 <SKIPCMD:LABEL=AB2,ON=32;
89 /
90 <DISP FILE:FILE=TMP.LG.LOG2.A1;
91 <SKIPCMD:LABEL=AB2,ON=32;
92 /
93 .T221 <EXEC CMDFILE:FILE=TMP.LG.LOG1.A1;
94 <DISP FILE:FILE=TMP.LG.LOG1.A2;
95 <SKIPCMD:LABEL=T222,ON=32;
96 <EXEC CMDFILE:FILE=TMP.LG.LOG1.A2;
97 <DISP FILE:FILE=TMP.LG.LOG1.A3;
98 <SKIPCMD:LABEL=T222,ON=32;
99 <EXEC CMDFILE:FILE=TMP.LG.LOG1.A3;
100 /

A30808-X3080-C485-5-7620 MMN:SW-COFIP-27
MMN:SW Maintenance
Software

REC55

101 .T222 <EXEC CMDFILE:FILE=TMP.LG.LOG2.A1;

102 <DISP FILE:FILE=TMP.LG.LOG2.A2;
103 <SKIPCMD:LABEL=T223,ON=32;
104 <EXEC CMDFILE:FILE=TMP.LG.LOG2.A2;
105 <DISP FILE:FILE=TMP.LG.LOG2.A3;
106 <SKIPCMD:LABEL=T223,ON=32;
107 <EXEC CMDFILE:FILE=TMP.LG.LOG2.A3;
108 /
109 .T223 <DEL FILE:FILE=TMP.LG.LOG1.;
110 <DEL FILE:FILE=TMP.LQ.LOG1.;
111 <STEP;
112 <DEL FILE:FILE=TMP.LG.LOG2.;
113 <DEL FILE:FILE=TMP.LQ.LOG2.;
114 <STEP;
115 /
116 <SKIPCMD:LABEL=M3;
117 /
118 .T23 <DISP FILE:FILE=TMP.LG.LOG1.A1;
119 <SKIPCMD:LABEL=AB2,ON=32;
120 /
121 <DISP FILE:FILE=TMP.LG.LOG2.A1;
122 <SKIPCMD:LABEL=AB2,ON=32;
123 /
124 <DISP FILE:FILE=TMP.LG.LOG3.A1;
125 <SKIPCMD:LABEL=AB2,ON=32;
126 /
127 .T231 <EXEC CMDFILE:FILE=TMP.LG.LOG1.A1;
128 <DISP FILE:FILE=TMP.LG.LOG1.A2;
129 <SKIPCMD:LABEL=T232,ON=32;
130 <EXEC CMDFILE:FILE=TMP.LG.LOG1.A2;
131 <DISP FILE:FILE=TMP.LG.LOG1.A3;
132 <SKIPCMD:LABEL=T232,ON=32;
133 <EXEC CMDFILE:FILE=TMP.LG.LOG1.A3;
134 /
135 .T232 <EXEC CMDFILE:FILE=TMP.LG.LOG2.A1;
136 <DISP FILE:FILE=TMP.LG.LOG2.A2;
137 <SKIPCMD:LABEL=T233,ON=32;
138 <EXEC CMDFILE:FILE=TMP.LG.LOG2.A2;
139 <DISP FILE:FILE=TMP.LG.LOG2.A3;
140 <SKIPCMD:LABEL=T233,ON=32;
141 <EXEC CMDFILE:FILE=TMP.LG.LOG2.A3;
142 /
143 .T233 <EXEC CMDFILE:FILE=TMP.LG.LOG3.A1;
144 <DISP FILE:FILE=TMP.LG.LOG3.A2;
145 <SKIPCMD:LABEL=T234,ON=32;
146 <EXEC CMDFILE:FILE=TMP.LG.LOG3.A2;
147 <DISP FILE:FILE=TMP.LG.LOG3.A3;
148 <SKIPCMD:LABEL=T234,ON=32;
149 <EXEC CMDFILE:FILE=TMP.LG.LOG3.A3;
150 /

MMN:SW-COFIP-28 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

REC55

151 .T234 <DEL FILE:FILE=TMP.LG.LOG1.;

152 <DEL FILE:FILE=TMP.LQ.LOG1.;
153 <STEP;
154 <DEL FILE:FILE=TMP.LG.LOG2.;
155 <DEL FILE:FILE=TMP.LQ.LOG2.;
156 <STEP;
157 <DEL FILE:FILE=TMP.LG.LOG3.;
158 <DEL FILE:FILE=TMP.LQ.LOG3.;
159 <STEP;
160 /
161 <SKIPCMD:LABEL=M3;
162 /
163 .T24 <DISP FILE:FILE=TMP.LG.LOG1.A1;
164 <SKIPCMD:LABEL=AB2,ON=32;
165 /
166 <DISP FILE:FILE=TMP.LG.LOG2.A1;
167 <SKIPCMD:LABEL=AB2,ON=32;
168 /
169 <DISP FILE:FILE=TMP.LG.LOG3.A1;
170 <SKIPCMD:LABEL=AB2,ON=32;
171 /
172 <DISP FILE:FILE=TMP.LG.LOG4.A1;
173 <SKIPCMD:LABEL=AB2,ON=32;
174 /
175 .T241 <EXEC CMDFILE:FILE=TMP.LG.LOG1.A1;
176 <DISP FILE:FILE=TMP.LG.LOG1.A2;
177 <SKIPCMD:LABEL=T242,ON=32;
178 <EXEC CMDFILE:FILE=TMP.LG.LOG1.A2;
179 <DISP FILE:FILE=TMP.LG.LOG1.A3;
180 <SKIPCMD:LABEL=T242,ON=32;
181 <EXEC CMDFILE:FILE=TMP.LG.LOG1.A3;
182 /
183 .T242 <EXEC CMDFILE:FILE=TMP.LG.LOG2.A1;
184 <DISP FILE:FILE=TMP.LG.LOG2.A2;
185 <SKIPCMD:LABEL=T243,ON=32;
186 <EXEC CMDFILE:FILE=TMP.LG.LOG2.A2;
187 <DISP FILE:FILE=TMP.LG.LOG2.A3;
188 <SKIPCMD:LABEL=T243,ON=32;
189 <EXEC CMDFILE:FILE=TMP.LG.LOG2.A3;
190 /
191 .T243 <EXEC CMDFILE:FILE=TMP.LG.LOG3.A1;
192 <DISP FILE:FILE=TMP.LG.LOG3.A2;
193 <SKIPCMD:LABEL=T244,ON=32;
194 <EXEC CMDFILE:FILE=TMP.LG.LOG3.A2;
195 <DISP FILE:FILE=TMP.LG.LOG3.A3;
196 <SKIPCMD:LABEL=T244,ON=32;
197 <EXEC CMDFILE:FILE=TMP.LG.LOG3.A3;
198 /
199 .T244 <EXEC CMDFILE:FILE=TMP.LG.LOG4.A1;
200 <DISP FILE:FILE=TMP.LG.LOG4.A2;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-29
MMN:SW Maintenance
Software

REC55

201 <SKIPCMD:LABEL=T245,ON=32;
202 <EXEC CMDFILE:FILE=TMP.LG.LOG4.A2;
203 <DISP FILE:FILE=TMP.LG.LOG4.A3;
204 <SKIPCMD:LABEL=T245,ON=32;
205 <EXEC CMDFILE:FILE=TMP.LG.LOG4.A3;
206 /
207 .T245 <DEL FILE:FILE=TMP.LG.LOG1.;
208 <DEL FILE:FILE=TMP.LQ.LOG1.;
209 <STEP;
210 <DEL FILE:FILE=TMP.LG.LOG2.;
211 <DEL FILE:FILE=TMP.LQ.LOG2.;
212 <STEP;
213 <DEL FILE:FILE=TMP.LG.LOG3.;
214 <DEL FILE:FILE=TMP.LQ.LOG3.;
215 <STEP;
216 <DEL FILE:FILE=TMP.LG.LOG4.;
217 <DEL FILE:FILE=TMP.LQ.LOG4.;
218 <STEP;
219 /
220 <SKIPCMD:LABEL=M3;
221 /
222 .T25 <DISP FILE:FILE=TMP.LG.LOG1.A1;
223 <SKIPCMD:LABEL=AB2,ON=32;
224 /
225 <DISP FILE:FILE=TMP.LG.LOG2.A1;
226 <SKIPCMD:LABEL=AB2,ON=32;
227 /
228 <DISP FILE:FILE=TMP.LG.LOG3.A1;
229 <SKIPCMD:LABEL=AB2,ON=32;
230 /
231 <DISP FILE:FILE=TMP.LG.LOG4.A1;
232 <SKIPCMD:LABEL=AB2,ON=32;
233 /
234 <DISP FILE:FILE=TMP.LG.LOG5.A1;
235 <SKIPCMD:LABEL=AB2,ON=32;
236 /
237 .T251 <EXEC CMDFILE:FILE=TMP.LG.LOG1.A1;
238 <DISP FILE:FILE=TMP.LG.LOG1.A2;
239 <SKIPCMD:LABEL=T252,ON=32;
240 <EXEC CMDFILE:FILE=TMP.LG.LOG1.A2;
241 <DISP FILE:FILE=TMP.LG.LOG1.A3;
242 <SKIPCMD:LABEL=T252,ON=32;
243 <EXEC CMDFILE:FILE=TMP.LG.LOG1.A3;
244 /
245 .T252 <EXEC CMDFILE:FILE=TMP.LG.LOG2.A1;
246 <DISP FILE:FILE=TMP.LG.LOG2.A2;
247 <SKIPCMD:LABEL=T253,ON=32;
248 <EXEC CMDFILE:FILE=TMP.LG.LOG2.A2;
249 <DISP FILE:FILE=TMP.LG.LOG2.A3;
250 <SKIPCMD:LABEL=T253,ON=32;

MMN:SW-COFIP-30 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

REC55

251 <EXEC CMDFILE:FILE=TMP.LG.LOG2.A3;

252 /
253 .T253 <EXEC CMDFILE:FILE=TMP.LG.LOG3.A1;
254 <DISP FILE:FILE=TMP.LG.LOG3.A2;
255 <SKIPCMD:LABEL=T254,ON=32;
256 <EXEC CMDFILE:FILE=TMP.LG.LOG3.A2;
257 <DISP FILE:FILE=TMP.LG.LOG3.A3;
258 <SKIPCMD:LABEL=T254,ON=32;
259 <EXEC CMDFILE:FILE=TMP.LG.LOG3.A3;
260 /
261 .T254 <EXEC CMDFILE:FILE=TMP.LG.LOG4.A1;
262 <DISP FILE:FILE=TMP.LG.LOG4.A2;
263 <SKIPCMD:LABEL=T255,ON=32;
264 <EXEC CMDFILE:FILE=TMP.LG.LOG4.A2;
265 <DISP FILE:FILE=TMP.LG.LOG4.A3;
266 <SKIPCMD:LABEL=T255,ON=32;
267 <EXEC CMDFILE:FILE=TMP.LG.LOG4.A3;
268 /
269 .T255 <EXEC CMDFILE:FILE=TMP.LG.LOG5.A1;
270 <DISP FILE:FILE=TMP.LG.LOG5.A2;
271 <SKIPCMD:LABEL=T256,ON=32;
272 <EXEC CMDFILE:FILE=TMP.LG.LOG5.A2;
273 <DISP FILE:FILE=TMP.LG.LOG5.A3;
274 <SKIPCMD:LABEL=T256,ON=32;
275 <EXEC CMDFILE:FILE=TMP.LG.LOG5.A3;
276 /
277 .T256 <DEL FILE:FILE=TMP.LG.LOG1.;
278 <DEL FILE:FILE=TMP.LQ.LOG1.;
279 <STEP;
280 <DEL FILE:FILE=TMP.LG.LOG2.;
281 <DEL FILE:FILE=TMP.LQ.LOG2.;
282 <STEP;
283 <DEL FILE:FILE=TMP.LG.LOG3.;
284 <DEL FILE:FILE=TMP.LQ.LOG3.;
285 <STEP;
286 <DEL FILE:FILE=TMP.LG.LOG4.;
287 <DEL FILE:FILE=TMP.LQ.LOG4.;
288 <STEP;
289 <DEL FILE:FILE=TMP.LG.LOG5.;
290 <DEL FILE:FILE=TMP.LQ.LOG5.;
291 <STEP;
292 /
293 .M3 <STEP;
294 //
295 // *******************************
296 // * UPDATING THE DATABASE ENDED *
297 // *******************************
298 /
299 <SKIPCMD:LABEL=OUT;
300 / *******************************

A30808-X3080-C485-5-7620 MMN:SW-COFIP-31
MMN:SW Maintenance
Software

REC55

301 / * FAULT EXITS AND END MESSAGE *

302 / *******************************
303 /
304 .AB1 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
305 // ****************
306 // *** FAULT 01 ***
307 // ****************
308 // **********************************************
309 // *** TRANSFERRING LOG FILES FROM TAPE TO ***
310 // *** MO NOT EXECUTED. ***
311 // *** MO DAMAGED OR MOD STATION DEFECTIVE ***
312 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
313 // *** ***
314 // *** START COMMAND FILE CG.SA.REC55 AGAIN. ***
315 // **********************************************
316 /
317 <ACT FNS:FNS=LG;
318 <ACT FNS:FNS=LQ;
319 <STEP;
320 /
321 <SETCFOPT:OFF=1&&11,SCOPE=GLOBAL;
322 <SKIPCMD:LABEL=END;
323 /
324 .AB2 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
325 // ****************
326 // *** FAULT 02 ***
327 // ****************
328 // *****************************************************
329 // *** ONE OR MORE OF THE LOG FILES WHICH, ACCORDING ***
330 // *** TO THE SAVING CONCEPT, SHOULD BE ON THE APS ***
331 // *** ROUTINE SAVE MO NOT PRESENT. ***
332 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
333 // *** ***
334 // *** START COMMAND FILE CG.SA.REC55 AGAIN. ***
335 // *****************************************************
336 /
337 <DEL FILE:FILE=TMP.LG.;
338 /
339 <DEL FILE:FILE=TMP.LQ.;
340 <STEP;
341 /
342 <SETCFOPT:OFF=1&&11,SCOPE=GLOBAL;
343 <SKIPCMD:LABEL=END;
344 /
345 .OUT <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
346 /
347 // *******************************
348 // *** FINISHED WITHOUT FAULTS ***
349 // *******************************
350 // **************************************************

MMN:SW-COFIP-32 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

REC55

351 // *** IF, ACCORDING TO THE PRINTOUT, ONE OR MORE ***

352 // *** MML-COMMAND(S) WAS (WERE) NOT EXECUTED, ***
353 // *** FIND CAUSE AND ELIMINATE FAULTS. ***
354 // *** ***
355 // *** CONTINUE THE PROCEDURE. ***
356 // **************************************************
357 /
358 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
359 <SKIPCMD:LABEL=END;
360 /
361 .END <SETCFOPT:ACKCFS=ERROR,DANCMD=NOEXEC,ACKREQ=NEG,SCOPE=GLOBAL;
362 <ENDFILE;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-33
MMN:SW Maintenance
Software

REC71

1 <CMDFILE;
2 /
3 // 80-REC71-01
4 /
5 /****V01***************************************************************
6 /* *
7 /* COMMAND FILE CG.SA.REC71 FOR RESCUE OF BACKGROUND MEMORY DATA *
8 /* ============================================================= *
9 /* *
10 /* TASK DESCRIPTION: *
11 /* ----------------- *
12 /* - SAVING LOGICAL METER FILES ON TAPE *
13 /* *
14 /* HOLD TAPE READY/LOADING MAGNETIC TAPE DEVICE: *
15 /* --------------------------------------------- *
16 /* - A LARGE TAPE WITH WRITE RING IS TO BE HELD READY *
17 /* - BEFORE STARTING THE COMMAND FILE THE MAGNETIC TAPE *
18 /* DEVICE IS TO BE LOADED AND SWITCHED TO ONLINE *
19 /* *
20 /* FAULT HANDLING: *
21 /* --------------- *
22 /* - AFTER INTERRUPTION OF THE FILE PROCESSING VIA FAULT *
23 /* EXITS AND CORRESPONDING FAULT HANDLING THE FILE CAN *
24 /* BE STARTED AGAIN *
25 /* *
26 /* SWITCH PRESETTINGS FOR START POINTS AND ENTRY POINTS: *
27 /* ===================================================== *
28 /* START POINT SWITCH PRESETTINGS *
29 /* ----------- ------------------ *
30 /* RESETCFOPT; *
31 /* *
32 /* M2 SETCFOPT:OFF=1&3&&10,ON=2,SCOPE=GLOBAL; *
33 /* M3 SETCFOPT:OFF=1&2&4&&10,ON=3,SCOPE=GLOBAL; *
34 /* *
35 /* FAULT 01 *
36 /* ELEMINATED SETCFOPT:OFF=1&3&&10,ON=2,SCOPE=GLOBAL; *
37 /* FAULT 01 *
38 /* NOT ELEMINATED SETCFOPT:OFF=1&&3&5&&10,ON=4,SCOPE=GLOBAL; *
39 /* FAULT 02 *
40 /* ELEMINATED SETCFOPT:OFF=1&2&4&&10,ON=3,SCOPE=GLOBAL; *
41 /* FAULT 02 *
42 /* NOT ELEMINATED SETCFOPT:OFF=1&&3&5&&10,ON=4,SCOPE=GLOBAL; *
43 /* *
44 /**********************************************************************
45 /
46 <SETCFOPT:ACKCFS=ERROR,DANCMD=EXEC,ACKREQ=POS,SCOPE=GLOBAL;
47 /
48 <SKIPCMD:LABEL=END,ON=1;
49 <SKIPCMD:LABEL=M2,ON=2;
50 <SKIPCMD:LABEL=M3,ON=3;

MMN:SW-COFIP-34 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

REC71

51 <SKIPCMD:LABEL=OUT2,ON=4;
52 /
53 .M1 <STEP;
54 <DISP FILE:FILE=CA.;
55 <SKIPCMD:LABEL=M2,OFF=32;
56 <SKIPCMD:LABEL=OUT1;
57 /
58 .M2 <STEP;
59 // **********************************
60 // * LABELING METER FILES SAVE TAPE *
61 // **********************************
62 /
63 <INIT MT:VSN=METTAP,MTD=00,CD=EBC,DENS=6250;
64 <SKIPCMD:LABEL=AB1,ON=32;
65 /
66 .M3 <STEP;
67 // **************************************
68 // * TAPE SAVING OF METER FILES STARTED *
69 // **************************************
70 /
71 .T31 <DISP FILE:FILE=CA.SU.UCHA;
72 <SKIPCMD:LABEL=T32,ON=32;
73 <TRANS FILE:VSNR=METTAP,COPMOD=SSWF,FILE=CA.SU.UCHA;
74 <SKIPCMD:LABEL=AB2,ON=32;
75 .T32 <DISP FILE:FILE=CA.ST.UCHA;
76 <SKIPCMD:LABEL=T33,ON=32;
77 <TRANS FILE:VSNR=METTAP,COPMOD=SSWF,FILE=CA.ST.UCHA;
78 <SKIPCMD:LABEL=AB2,ON=32;
79 .T33 <DISP FILE:FILE=CA.TF.UCHA;
80 <SKIPCMD:LABEL=T34,ON=32;
81 <TRANS FILE:VSNR=METTAP,COPMOD=SSWF,FILE=CA.TF.UCHA;
82 <SKIPCMD:LABEL=AB2,ON=32;
83 .T34 <DISP FILE:FILE=CA.TR.UCHA;
84 <SKIPCMD:LABEL=T35,ON=32;
85 <TRANS FILE:VSNR=METTAP,COPMOD=SSWF,FILE=CA.TR.UCHA;
86 <SKIPCMD:LABEL=AB2,ON=32;
87 .T35 <DISP FILE:FILE=CA.IC.UCHA;
88 <SKIPCMD:LABEL=M4,ON=32;
89 <MOD FILEAUT:FILE=CA.IC.UCHA,AR=NODEL&NOWR&NOCN;
90 <TRANS FILE:VSNR=METTAP,COPMOD=SSWF,FILE=CA.IC.UCHA;
91 <SKIPCMD:LABEL=AB2,ON=32;
92 /
93 .M4 <STEP;
94 // ************************************
95 // * TAPE SAVING OF METER FILES ENDED *
96 // ************************************
97 /
98 <REWIND MT:VSN=METTAP;
99 /
100 .M5 <STEP;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-35
MMN:SW Maintenance
Software

REC71

101 // ****************************************
102 // * DISPLAYING METER FILES TAPE CONTENTS *
103 // ****************************************
104 /
105 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
106 <DISP FILE:VSN=METTAP;
107 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
108 /
109 <SKIPCMD:LABEL=OUT;
110 / *******************************
111 / * FAULT EXITS AND END MESSAGE *
112 / *******************************
113 /
114 .AB1 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
115 // ****************
116 // *** FAULT 01 ***
117 // ****************
118 // ************************************************************
119 // *** LABELING METER FILES SAVE TAPE NOT EXECUTED. ***
120 // *** TAPE DEVICE OFFLINE OR DEFECTIVE OR TAPE DAMAGED: ***
121 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
122 // *** ***
123 // *** START COMMAND FILE CG.SA.REC71 AGAIN. ***
124 // *** ***
125 // *** (IF ELIMINATING OF FAULTS NOT POSSIBLE, ) ***
126 // *** (ENTER: SETCFOPT:OFF=1&&3&5&&10,ON=4,SCOPE=GLOBAL; ) ***
127 // *** ***
128 // *** START COMMAND FILE CG.SA.REC71 AGAIN. ***
129 // ************************************************************
130 /
131 <REWIND MT:VSN=METTAP;
132 /
133 <SETCFOPT:OFF=1&3&&10,ON=2,SCOPE=GLOBAL;
134 <SKIPCMD:LABEL=END;
135 /
136 .AB2 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
137 // ****************
138 // *** FAULT 02 ***
139 // ****************
140 // ************************************************************
141 // *** TAPE SAVING OF LOGICAL METER FILES NOT EXECUTED. ***
142 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
143 // *** ***
144 // *** START COMMAND FILE CG.SA.REC71 AGAIN. ***
145 // *** ***
146 // *** (IF ELIMINATING OF FAULTS NOT POSSIBLE, ) ***
147 // *** (ENTER: SETCFOPT:OFF=1&&3&5&&10,ON=4,SCOPE=GLOBAL; ) ***
148 // *** ***
149 // *** START COMMAND FILE CG.SA.REC71 AGAIN. ***
150 // ************************************************************

MMN:SW-COFIP-36 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

REC71

151 /
152 <REWIND MT:VSN=METTAP;
153 /
154 <SETCFOPT:OFF=1&2&4&&10,ON=3,SCOPE=GLOBAL;
155 <SKIPCMD:LABEL=END;
156 /
157 .OUT <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
158 // ******************************
159 // *** FINISHED THE PROCEDURE ***
160 // ******************************
161 // ******************************************
162 // *** RELOAD MAGNETIC TAPE DEVICE. ***
163 // *** ***
164 // *** SAVING OF METER FILES IS FINISHED. ***
165 // ******************************************
166 /
167 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
168 <SKIPCMD:LABEL=END;
169 /
170 .OUT1 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
171 // ******************************
172 // *** FINISHED THE PROCEDURE ***
173 // ******************************
174 // ******************************************
175 // *** RELOAD MAGNETIC TAPE DEVICE. ***
176 // *** ***
177 // *** NO METER FILE FOR SAVING EXISTS. ***
178 // *** ***
179 // *** SAVING OF METER FILES IS FINISHED. ***
180 // ******************************************
181 /
182 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
183 <SKIPCMD:LABEL=END;
184 /
185 .OUT2 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
186 // ******************************
187 // *** FINISHED THE PROCEDURE ***
188 // ******************************
189 // ******************************************
190 // *** RELOAD MAGNETIC TAPE DEVICE. ***
191 // *** ***
192 // *** NO METER FILE WAS TRANSFERRED. ***
193 // *** ***
194 // *** SAVING OF METER FILES IS FINISHED. ***
195 // ******************************************
196 /
197 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
198 <SKIPCMD:LABEL=END;
199 /
200 .END <SETCFOPT:ACKCFS=ERROR,DANCMD=NOEXEC,ACKREQ=NEG,SCOPE=GLOBAL;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-37
MMN:SW Maintenance
Software

REC71

201 <ENDFILE;

MMN:SW-COFIP-38 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

REC72

1 <CMDFILE;
2 /
3 // 80-REC72-01
4 /
5 /****V01***************************************************************
6 /* *
7 /* COMMAND FILE CG.SA.REC72 FOR RESCUE OF BACKGROUND MEMORY DATA *
8 /* ============================================================= *
9 /* *
10 /* TASK DESCRIPTION: *
11 /* ----------------- *
12 /* - SAVING AMA ACCOUNTING FILE ON TAPE *
13 /* *
14 /* HOLD TAPE READY/LOADING MAGNETIC TAPE DEVICE: *
15 /* --------------------------------------------- *
16 /* - A LARGE TAPE WITH WRITE RING IS TO BE HELD READY *
17 /* - BEFORE STARTING THE COMMAND FILE THE MAGNETIC TAPE *
18 /* DEVICE IS TO BE LOADED AND SWITCHED TO ONLINE *
19 /* *
20 /* FAULT HANDLING: *
21 /* --------------- *
22 /* - AFTER INTERRUPTION OF THE FILE PROCESSING VIA FAULT *
23 /* EXITS AND CORRESPONDING FAULT HANDLING THE FILE CAN *
24 /* BE STARTED AGAIN *
25 /* *
26 /* SWITCH PRESETTINGS FOR START POINTS AND ENTRY POINTS: *
27 /* ===================================================== *
28 /* START POINT SWITCH PRESETTINGS *
29 /* ----------- ------------------ *
30 /* RESETCFOPT; *
31 /* *
32 /* M2 SETCFOPT:OFF=1&3&&10,ON=2,SCOPE=GLOBAL; *
33 /* M3 SETCFOPT:OFF=1&2&4&&10,ON=3,SCOPE=GLOBAL; *
34 /* *
35 /* FAULT 01 *
36 /* ELEMINATED SETCFOPT:OFF=1&3&&10,ON=2,SCOPE=GLOBAL; *
37 /* FAULT 01 *
38 /* NOT ELEMINATED SETCFOPT:OFF=1&&3&5&&10,ON=4,SCOPE=GLOBAL; *
39 /* FAULT 02 *
40 /* ELEMINATED SETCFOPT:OFF=1&2&4&&10,ON=3,SCOPE=GLOBAL; *
41 /* FAULT 02 *
42 /* NOT ELEMINATED SETCFOPT:OFF=1&&3&5&&10,ON=4,SCOPE=GLOBAL; *
43 /* *
44 /**********************************************************************
45 /
46 <SETCFOPT:ACKCFS=ERROR,DANCMD=EXEC,ACKREQ=POS,SCOPE=GLOBAL;
47 /
48 <SKIPCMD:LABEL=END,ON=1;
49 <SKIPCMD:LABEL=M2,ON=2;
50 <SKIPCMD:LABEL=M3,ON=3;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-39
MMN:SW Maintenance
Software

REC72

51 <SKIPCMD:LABEL=OUT2,ON=4;
52 /
53 .M1 <STEP;
54 <DISP FILE:FILE=IA.ICAMA;
55 <SKIPCMD:LABEL=M2,OFF=32;
56 <SKIPCMD:LABEL=OUT1;
57 /
58 .M2 <STEP;
59 // ******************************************
60 // * LABELING AMA ACCOUNTING FILE SAVE TAPE *
61 // ******************************************
62 /
63 <INIT MT:VSN=AMATAP,MTD=00,CD=ISO,DENS=6250;
64 <SKIPCMD:LABEL=AB1,ON=32;
65 /
66 .M3 <STEP;
67 //
68 // **********************************************
69 // * TAPE SAVING OF AMA ACCOUNTING FILE STARTED *
70 // **********************************************
71 /
72 <TRANS FILE:VSNR=AMATAP,COPMOD=POST,FILE=IA.ICAMA;
73 <SKIPCMD:LABEL=AB2,ON=32;
74 /
75 .M4 <STEP;
76 //
77 // ********************************************
78 // * TAPE SAVING OF AMA ACCOUNTING FILE ENDED *
79 // ********************************************
80 /
81 <REWIND MT:VSN=AMATAP;
82 /
83 .M5 <STEP;
84 //
85 // ************************************************
86 // * DISPLAYING AMA ACCOUNTING FILE TAPE CONTENTS *
87 // ************************************************
88 /
89 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
90 <DISP FILE:VSN=AMATAP;
91 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
92 /
93 <SKIPCMD:LABEL=OUT;
94 / *******************************
95 / * FAULT EXITS AND END MESSAGE *
96 / *******************************
97 /
98 .AB1 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
99 // ****************
100 // *** FAULT 01 ***

MMN:SW-COFIP-40 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

REC72

101 // ****************
102 // ************************************************************
103 // *** LABELING AMA ACCOUNTINGFILE SAVE TAPE NOT EXECUTED. ***
104 // *** TAPE DEVICE OFFLINE OR DEFECTIVE OR TAPE DAMAGED: ***
105 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
106 // *** ***
107 // *** START COMMAND FILE CG.SA.REC72 AGAIN. ***
108 // *** ***
109 // *** (IF ELIMINATING OF FAULTS NOT POSSIBLE, ) ***
110 // *** (ENTER: SETCFOPT:OFF=1&&3&5&&10,ON=4,SCOPE=GLOBAL; ) ***
111 // *** ***
112 // *** START COMMAND FILE CG.SA.REC72 AGAIN. ***
113 // ************************************************************
114 /
115 <REWIND MT:VSN=AMATAP;
116 /
117 <SETCFOPT:OFF=1&3&&10,ON=2,SCOPE=GLOBAL;
118 <SKIPCMD:LABEL=END;
119 /
120 .AB2 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
121 // ****************
122 // *** FAULT 02 ***
123 // ****************
124 // ************************************************************
125 // *** TAPE SAVING OF AMA ACCOUNTING FILE NOT EXECUTED. ***
126 // *** ***
127 // *** CASE 1: ***
128 // *** ======= ***
129 // *** TAPE DEVICE OFFLINE OR DEFECTIVE OR TAPE DAMAGED: ***
130 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
131 // *** ***
132 // *** START COMMAND FILE CG.SA.REC72 AGAIN. ***
133 // *** ***
134 // *** (IF ELIMINATING OF FAULTS NOT POSSIBLE, ) ***
135 // *** (ENTER: SETCFOPT:OFF=1&&3&5&&10,ON=4,SCOPE=GLOBAL; ) ***
136 // *** ***
137 // *** START COMMAND FILE CG.SA.REC72 AGAIN. ***
138 // *** ***
139 // *** CASE 2: ***
140 // *** ======= ***
141 // *** ERROR: L FC 33. ***
142 // *** CORRESPONDING BACKGROUND MEMORY FILES ARE EMPTY. ***
143 // *** ***
144 // *** (ENTER: SETCFOPT:OFF=1&&3&5&&10,ON=4,SCOPE=GLOBAL; ) ***
145 // *** ***
146 // *** START COMMAND FILE CG.SA.REC72 AGAIN. ***
147 // ************************************************************
148 /
149 <REWIND MT:VSN=AMATAP;
150 /

A30808-X3080-C485-5-7620 MMN:SW-COFIP-41
MMN:SW Maintenance
Software

REC72

151 <SETCFOPT:OFF=1&2&4&&10,ON=3,SCOPE=GLOBAL;
152 <SKIPCMD:LABEL=END;
153 /
154 .OUT <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
155 /
156 // ******************************
157 // *** FINISHED THE PROCEDURE ***
158 // ******************************
159 // **************************************************
160 // *** RELOAD MAGNETIC TAPE DEVICE. ***
161 // *** ***
162 // *** SAVING OF AMA ACCOUNTING FILE IS FINISHED. ***
163 // **************************************************
164 /
165 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
166 <SKIPCMD:LABEL=END;
167 /
168 .OUT1 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
169 /
170 // ******************************
171 // *** FINISHED THE PROCEDURE ***
172 // ******************************
173 // **************************************************
174 // *** RELOAD MAGNETIC TAPE DEVICE. ***
175 // *** ***
176 // *** NO AMA ACCOUNTING FILE FOR SAVING EXISTS. ***
177 // *** ***
178 // *** SAVING OF AMA ACCOUNTING FILE IS FINISHED. ***
179 // **************************************************
180 /
181 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
182 <SKIPCMD:LABEL=END;
183 /
184 .OUT2 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
185 /
186 // ******************************
187 // *** FINISHED THE PROCEDURE ***
188 // ******************************
189 // **************************************************
190 // *** RELOAD MAGNETIC TAPE DEVICE. ***
191 // *** ***
192 // *** NO AMA ACCOUNTING FILE WAS TRANSFERRED. ***
193 // *** ***
194 // *** SAVING OF AMA ACCOUNTING FILE IS FINISHED. ***
195 // **************************************************
196 /
197 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
198 <SKIPCMD:LABEL=END;
199 /
200 .END <SETCFOPT:ACKCFS=ERROR,DANCMD=NOEXEC,ACKREQ=NEG,SCOPE=GLOBAL;

MMN:SW-COFIP-42 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

REC72

201 <ENDFILE;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-43
MMN:SW Maintenance
Software

REC73

1 <CMDFILE;
2 /
3 // 80-REC73-01
4 /
5 /****V01***************************************************************
6 /* *
7 /* COMMAND FILE CG.SA.REC73 FOR RESCUE OF BACKGROUND MEMORY DATA *
8 /* ============================================================= *
9 /* *
10 /* TASK DESCRIPTION: *
11 /* ----------------- *
12 /* - SAVING LOG DATA FILES ON TAPE *
13 /* *
14 /* HOLD TAPE READY/LOADING MAGNETIC TAPE DEVICE: *
15 /* --------------------------------------------- *
16 /* - A LARGE TAPE WITH WRITE RING IS TO BE HELD READY *
17 /* - BEFORE STARTING THE COMMAND FILE THE MAGNETIC TAPE *
18 /* DEVICE IS TO BE LOADED AND SWITCHED TO ONLINE *
19 /* *
20 /* FAULT HANDLING: *
21 /* --------------- *
22 /* - AFTER INTERRUPTION OF THE FILE PROCESSING VIA FAULT *
23 /* EXITS AND CORRESPONDING FAULT HANDLING THE FILE CAN *
24 /* BE STARTED AGAIN *
25 /* *
26 /* SWITCH PRESETTINGS FOR START POINTS AND ENTRY POINTS: *
27 /* ===================================================== *
28 /* START POINT SWITCH PRESETTINGS *
29 /* ----------- ------------------ *
30 /* RESETCFOPT; *
31 /* *
32 /* M3 SETCFOPT:OFF=1&3&&10,ON=2,SCOPE=GLOBAL; *
33 /* M4 SETCFOPT:OFF=1&2&4&&10,ON=3,SCOPE=GLOBAL; *
34 /* *
35 /* FAULT 01 *
36 /* ELEMINATED SETCFOPT:OFF=1&3&&10,ON=2,SCOPE=GLOBAL; *
37 /* FAULT 01 *
38 /* NOT ELEMINATED SETCFOPT:OFF=1&&3&5&&10,ON=4,SCOPE=GLOBAL; *
39 /* FAULT 02 *
40 /* ELEMINATED SETCFOPT:OFF=1&2&4&&10,ON=3,SCOPE=GLOBAL; *
41 /* FAULT 02 *
42 /* NOT ELEMINATED SETCFOPT:OFF=1&&3&5&&10,ON=4,SCOPE=GLOBAL; *
43 /* *
44 /**********************************************************************
45 /
46 <SETCFOPT:ACKCFS=ERROR,DANCMD=EXEC,ACKREQ=POS,SCOPE=GLOBAL;
47 /
48 <SKIPCMD:LABEL=END,ON=1;
49 <SKIPCMD:LABEL=M3,ON=2;
50 <SKIPCMD:LABEL=M4,ON=3;

MMN:SW-COFIP-44 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

REC73

51 <SKIPCMD:LABEL=OUT2,ON=4;
52 /
53 .M1 <STEP;
54 <DISP FILE:FILE=LG.;
55 <SKIPCMD:LABEL=M2,OFF=32;
56 <SKIPCMD:LABEL=OUT1;
57 /
58 .M2 <STEP;
59 <RSET LOG;
60 /
61 .M3 <STEP;
62 // *************************************
63 // * LABELING LOG DATA FILES SAVE TAPE *
64 // *************************************
65 /
66 <INIT MT:VSN=LOGTAP,MTD=00,CD=EBC,DENS=6250;
67 <SKIPCMD:LABEL=AB1,ON=32;
68 /
69 .M4 <STEP;
70 /
71 // *****************************************
72 // * TAPE SAVING OF LOG DATA FILES STARTED *
73 // *****************************************
74 /
75 <TRANS FILE:VSNR=LOGTAP,FILE=LG.;
76 <SKIPCMD:LABEL=AB2,ON=32;
77 /
78 <DISP FILE:FILE=LQ.;
79 <SKIPCMD:LABEL=M5,ON=32;
80 /
81 <TRANS FILE:VSNR=LOGTAP,FILE=LQ.;
82 <SKIPCMD:LABEL=AB2,ON=32;
83 /
84 .M5 <STEP;
85 /
86 // ***************************************
87 // * TAPE SAVING OF LOG DATA FILES ENDED *
88 // ***************************************
89 /
90 <REWIND MT:VSN=LOGTAP;
91 /
92 .M6 <STEP;
93 /
94 // *******************************************
95 // * DISPLAYING LOG DATA FILES TAPE CONTENTS *
96 // *******************************************
97 /
98 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
99 <DISP FILE:VSN=LOGTAP;
100 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-45
MMN:SW Maintenance
Software

REC73

101 /
102 <SKIPCMD:LABEL=OUT;
103 / *******************************
104 / * FAULT EXITS AND END MESSAGE *
105 / *******************************
106 /
107 .AB1 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
108 // ****************
109 // *** FAULT 01 ***
110 // ****************
111 // ************************************************************
112 // *** LABELING LOG DATA FILES SAVE TAPE NOT EXECUTED. ***
113 // *** TAPE DEVICE OFFLINE OR DEFECTIVE OR TAPE DAMAGED: ***
114 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
115 // *** ***
116 // *** START COMMAND FILE CG.SA.REC73 AGAIN. ***
117 // *** ***
118 // *** (IF ELIMINATING OF FAULTS NOT POSSIBLE, ) ***
119 // *** (ENTER: SETCFOPT:OFF=1&&3&5&&10,ON=4,SCOPE=GLOBAL; ) ***
120 // *** ***
121 // *** START COMMAND FILE CG.SA.REC73 AGAIN. ***
122 // ************************************************************
123 /
124 <REWIND MT:VSN=LOGTAP;
125 /
126 <SETCFOPT:OFF=1&3&&10,ON=2,SCOPE=GLOBAL;
127 <SKIPCMD:LABEL=END;
128 /
129 .AB2 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
130 // ****************
131 // *** FAULT 02 ***
132 // ****************
133 // ************************************************************
134 // *** TAPE SAVING OF LOG DATA FILES NOT EXECUTED. ***
135 // *** TAPE DEVICE OFFLINE OR DEFECTIVE OR TAPE DAMAGED: ***
136 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
137 // *** ***
138 // *** START COMMAND FILE CG.SA.REC73 AGAIN. ***
139 // *** ***
140 // *** (IF ELIMINATING OF FAULTS NOT POSSIBLE, ) ***
141 // *** (ENTER: SETCFOPT:OFF=1&&3&5&&10,ON=4,SCOPE=GLOBAL; ) ***
142 // *** ***
143 // *** START COMMAND FILE CG.SA.REC73 AGAIN. ***
144 // ************************************************************
145 /
146 <REWIND MT:VSN=LOGTAP;
147 /
148 <SETCFOPT:OFF=1&2&4&&10,ON=3,SCOPE=GLOBAL;
149 <SKIPCMD:LABEL=END;
150 /

MMN:SW-COFIP-46 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

REC73

151 .OUT <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;

152 /
153 // ******************************
154 // *** FINISHED THE PROCEDURE ***
155 // ******************************
156 // *********************************************
157 // *** RELOAD MAGNETIC TAPE DEVICE. ***
158 // *** ***
159 // *** SAVING OF LOG DATA FILES IS FINISHED. ***
160 // *********************************************
161 /
162 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
163 <SKIPCMD:LABEL=END;
164 /
165 .OUT1 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
166 /
167 // ******************************
168 // *** FINISHED THE PROCEDURE ***
169 // ******************************
170 // *********************************************
171 // *** RELOAD MAGNETIC TAPE DEVICE. ***
172 // *** ***
173 // *** NO LOG DATA FILE FOR SAVING EXISTS. ***
174 // *** ***
175 // *** SAVING OF LOG DATA FILES IS FINISHED. ***
176 // *********************************************
177 /
178 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
179 <SKIPCMD:LABEL=END;
180 /
181 .OUT2 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
182 /
183 // ******************************
184 // *** FINISHED THE PROCEDURE ***
185 // ******************************
186 // *********************************************
187 // *** RELOAD MAGNETIC TAPE DEVICE. ***
188 // *** ***
189 // *** NO LOG DATA FILE WAS TRANSFERRED. ***
190 // *** ***
191 // *** SAVING OF LOG DATA FILES IS FINISHED. ***
192 // *********************************************
193 /
194 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
195 <SKIPCMD:LABEL=END;
196 /
197 .END <SETCFOPT:ACKCFS=ERROR,DANCMD=NOEXEC,ACKREQ=NEG,SCOPE=GLOBAL;
198 <ENDFILE;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-47
MMN:SW Maintenance
Software

REC74

1 <CMDFILE;
2 /
3 // 80-REC74-01
4 /
5 /****V01***************************************************************
6 /* *
7 /* COMMAND FILE CG.SA.REC74 FOR RESCUE OF BACKGROUND MEMORY DATA *
8 /* ============================================================= *
9 /* *
10 /* TASK DESCRIPTION: *
11 /* ----------------- *
12 /* - SAVING HISTORY FILES ON TAPE *
13 /* *
14 /* HOLD TAPE READY/LOADING MAGNETIC TAPE DEVICE: *
15 /* --------------------------------------------- *
16 /* - A LARGE TAPE WITH WRITE RING IS TO BE HELD READY *
17 /* - BEFORE STARTING THE COMMAND FILE THE MAGNETIC TAPE *
18 /* DEVICE IS TO BE LOADED AND SWITCHED TO ONLINE *
19 /* *
20 /* FAULT HANDLING: *
21 /* --------------- *
22 /* - AFTER INTERRUPTION OF THE FILE PROCESSING VIA FAULT *
23 /* EXITS AND CORRESPONDING FAULT HANDLING THE FILE CAN *
24 /* BE STARTED AGAIN *
25 /* *
26 /* SWITCH PRESETTINGS FOR START POINTS AND ENTRY POINTS: *
27 /* ===================================================== *
28 /* START POINT SWITCH PRESETTINGS *
29 /* ----------- ------------------ *
30 /* RESETCFOPT; *
31 /* *
32 /* M2 SETCFOPT:OFF=1&3&&10,ON=2,SCOPE=GLOBAL; *
33 /* M3 SETCFOPT:OFF=1&2&4&&10,ON=3,SCOPE=GLOBAL; *
34 /* M5 SETCFOPT:OFF=1&&3&5&&10,ON=4,SCOPE=GLOBAL; *
35 /* M7 SETCFOPT:OFF=1&&4&6&&10,ON=5,SCOPE=GLOBAL; *
36 /* *
37 /* FAULT 01 *
38 /* ELEMINATED SETCFOPT:OFF=1&3&&10,ON=2,SCOPE=GLOBAL; *
39 /* FAULT 01 *
40 /* NOT ELEMINATED SETCFOPT:OFF=1&&5&7&&10,ON=6,SCOPE=GLOBAL; *
41 /* FAULT 02 *
42 /* ELEMINATED SETCFOPT:OFF=1&2&4&&10,ON=3,SCOPE=GLOBAL; *
43 /* FAULT 02 *
44 /* NOT ELEMINATED SETCFOPT:OFF=1&&6&8&&10,ON=7,SCOPE=GLOBAL; *
45 /* FAULT 03 *
46 /* ELEMINATED SETCFOPT:OFF=1&&3&5&&10,ON=4,SCOPE=GLOBAL; *
47 /* FAULT 03 *
48 /* NOT ELEMINATED SETCFOPT:OFF=1&&7&9&10,ON=8,SCOPE=GLOBAL; *
49 /* FAULT 04 *
50 /* ELEMINATED SETCFOPT:OFF=1&&4&6&&10,ON=5,SCOPE=GLOBAL; *

MMN:SW-COFIP-48 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

REC74

51 /* FAULT 04 *
52 /* NOT ELEMINATED SETCFOPT:OFF=1&&5&7&10,ON=6,SCOPE=GLOBAL; *
53 /* *
54 /**********************************************************************
55 /
56 <SETCFOPT:ACKCFS=ERROR,DANCMD=EXEC,ACKREQ=POS,SCOPE=GLOBAL;
57 /
58 <SKIPCMD:LABEL=END,ON=1;
59 <SKIPCMD:LABEL=M2,ON=2;
60 <SKIPCMD:LABEL=M3,ON=3;
61 <SKIPCMD:LABEL=M5,ON=4;
62 <SKIPCMD:LABEL=M7,ON=5;
63 <SKIPCMD:LABEL=OUT2,ON=6;
64 <SKIPCMD:LABEL=M5,ON=7;
65 <SKIPCMD:LABEL=M7,ON=8;
66 /
67 .M1 <STEP;
68 <DISP FILE:FILE=SG.;
69 <SKIPCMD:LABEL=M2,OFF=32;
70 /
71 <DISP FILE:FILE=HF.;
72 <SKIPCMD:LABEL=M2,OFF=32;
73 /
74 <DISP FILE:FILE=TM.;
75 <SKIPCMD:LABEL=M2,OFF=32;
76 <SKIPCMD:LABEL=OUT1;
77 /
78 .M2 <STEP;
79 // ************************************
80 // * LABELING HISTORY FILES SAVE TAPE *
81 // ************************************
82 /
83 <INIT MT:VSN=HISTAP,MTD=00,CD=EBC,DENS=6250;
84 <SKIPCMD:LABEL=AB1,ON=32;
85 /
86 .M3 <STEP;
87 <DISP FILE:FILE=SG.;
88 <SKIPCMD:LABEL=M5,ON=32;
89 /
90 //
91 // *******************************************
92 // * TAPE SAVING OF SG-HISTORY FILES STARTED *
93 // *******************************************
94 /
95 <TRANS FILE:VSNR=HISTAP,FILE=SG.;
96 <SKIPCMD:LABEL=AB2,ON=32;
97 /
98 .M4 <STEP;
99 //
100 // *****************************************

A30808-X3080-C485-5-7620 MMN:SW-COFIP-49
MMN:SW Maintenance
Software

REC74

101 // * TAPE SAVING OF SG-HISTORY FILES ENDED *

102 // *****************************************
103 /
104 <REWIND MT:VSN=HISTAP;
105 /
106 .M5 <STEP;
107 <DISP FILE:FILE=HF.;
108 <SKIPCMD:LABEL=M7,ON=32;
109 /
110 //
111 // *******************************************
112 // * TAPE SAVING OF HF-HISTORY FILES STARTED *
113 // *******************************************
114 /
115 <TRANS FILE:VSNR=HISTAP,FILE=HF.;
116 <SKIPCMD:LABEL=AB3,ON=32;
117 /
118 .M6 <STEP;
119 //
120 // *****************************************
121 // * TAPE SAVING OF HF-HISTORY FILES ENDED *
122 // *****************************************
123 /
124 <REWIND MT:VSN=HISTAP;
125 /
126 .M7 <STEP;
127 <DISP FILE:FILE=TM.;
128 <SKIPCMD:LABEL=M9,ON=32;
129 /
130 //
131 // *******************************************
132 // * TAPE SAVING OF TM-HISTORY FILES STARTED *
133 // *******************************************
134 /
135 <TRANS FILE:VSNR=HISTAP,FILE=TM.;
136 <SKIPCMD:LABEL=AB4,ON=32;
137 /
138 .M8 <STEP;
139 //
140 // *****************************************
141 // * TAPE SAVING OF TM-HISTORY FILES ENDED *
142 // *****************************************
143 /
144 <REWIND MT:VSN=HISTAP;
145 /
146 .M9 <STEP;
147 //
148 // ******************************************
149 // * DISPLAYING HISTORY FILES TAPE CONTENTS *
150 // ******************************************

MMN:SW-COFIP-50 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

REC74

151 /
152 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
153 <DISP FILE:VSN=HISTAP;
154 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
155 /
156 <SKIPCMD:LABEL=OUT;
157 / *******************************
158 / * FAULT EXITS AND END MESSAGE *
159 / *******************************
160 /
161 .AB1 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
162 // ****************
163 // *** FAULT 01 ***
164 // ****************
165 // ************************************************************
166 // *** LABELING HISTORY FILES SAVE TAPE NOT EXECUTED. ***
167 // *** TAPE DEVICE OFFLINE OR DEFECTIVE OR TAPE DAMAGED: ***
168 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
169 // *** ***
170 // *** START COMMAND FILE CG.SA.REC74 AGAIN. ***
171 // *** ***
172 // *** (IF ELIMINATING OF FAULTS NOT POSSIBLE, ) ***
173 // *** (ENTER: SETCFOPT:OFF=1&&5&7&&10,ON=6,SCOPE=GLOBAL; ) ***
174 // *** ***
175 // *** START COMMAND FILE CG.SA.REC74 AGAIN. ***
176 // ************************************************************
177 /
178 <REWIND MT:VSN=HISTAP;
179 /
180 <SETCFOPT:OFF=1&3&&10,ON=2,SCOPE=GLOBAL;
181 <SKIPCMD:LABEL=END;
182 /
183 .AB2 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
184 // ****************
185 // *** FAULT 02 ***
186 // ****************
187 // ************************************************************
188 // *** TAPE SAVING OF SG-HISTORY FILES NOT EXECUTED. ***
189 // *** ***
190 // *** CASE 1: ***
191 // *** ======= ***
192 // *** TAPE DEVICE OFFLINE OR DEFECTIVE OR TAPE DAMAGED: ***
193 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
194 // *** ***
195 // *** START COMMAND FILE CG.SA.REC74 AGAIN. ***
196 // *** ***
197 // *** (IF ELIMINATING OF FAULTS NOT POSSIBLE, ) ***
198 // *** (ENTER: SETCFOPT:OFF=1&&6&8&&10,ON=7,SCOPE=GLOBAL; ) ***
199 // *** ***
200 // *** START COMMAND FILE CG.SA.REC74 AGAIN. ***

A30808-X3080-C485-5-7620 MMN:SW-COFIP-51
MMN:SW Maintenance
Software

REC74

201 // *** ***

202 // *** CASE 2: ***
203 // *** ======= ***
204 // *** ERROR: L FC 33. ***
205 // *** CORRESPONDING BACKGROUND MEMORY FILES ARE EMPTY. ***
206 // *** ***
207 // *** (ENTER: SETCFOPT:OFF=1&&6&8&&10,ON=7,SCOPE=GLOBAL; ) ***
208 // *** ***
209 // *** START COMMAND FILE CG.SA.REC74 AGAIN. ***
210 // ************************************************************
211 /
212 <REWIND MT:VSN=HISTAP;
213 /
214 <SETCFOPT:OFF=1&2&4&&10,ON=3,SCOPE=GLOBAL;
215 <SKIPCMD:LABEL=END;
216 /
217 .AB3 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
218 // ****************
219 // *** FAULT 03 ***
220 // ****************
221 // ************************************************************
222 // *** TAPE SAVING OF HF-HISTORY FILES NOT EXECUTED. ***
223 // *** ***
224 // *** CASE 1: ***
225 // *** ======= ***
226 // *** TAPE DEVICE OFFLINE OR DEFECTIVE OR TAPE DAMAGED: ***
227 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
228 // *** ***
229 // *** START COMMAND FILE CG.SA.REC74 AGAIN. ***
230 // *** ***
231 // *** (IF ELIMINATING OF FAULTS NOT POSSIBLE, ) ***
232 // *** (ENTER: SETCFOPT:OFF=1&&7&9&10,ON=8,SCOPE=GLOBAL; ) ***
233 // *** ***
234 // *** START COMMAND FILE CG.SA.REC74 AGAIN. ***
235 // *** ***
236 // *** CASE 2: ***
237 // *** ======= ***
238 // *** ERROR: L FC 33. ***
239 // *** CORRESPONDING BACKGROUND MEMORY FILES ARE EMPTY. ***
240 // *** ***
241 // *** (ENTER: SETCFOPT:OFF=1&&7&9&10,ON=8,SCOPE=GLOBAL; ) ***
242 // *** ***
243 // *** START COMMAND FILE CG.SA.REC74 AGAIN. ***
244 // ************************************************************
245 /
246 <REWIND MT:VSN=HISTAP;
247 /
248 <SETCFOPT:OFF=1&&3&5&&10,ON=4,SCOPE=GLOBAL;
249 <SKIPCMD:LABEL=END;
250 /

MMN:SW-COFIP-52 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

REC74

251 .AB4 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;

252 // ****************
253 // *** FAULT 04 ***
254 // ****************
255 // ************************************************************
256 // *** TAPE SAVING OF TM-HISTORY FILES NOT EXECUTED. ***
257 // *** ***
258 // *** CASE 1: ***
259 // *** ======= ***
260 // *** TAPE DEVICE OFFLINE OR DEFECTIVE OR TAPE DAMAGED: ***
261 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
262 // *** ***
263 // *** START COMMAND FILE CG.SA.REC74 AGAIN. ***
264 // *** ***
265 // *** (IF ELIMINATING OF FAULTS NOT POSSIBLE, ) ***
266 // *** (ENTER: SETCFOPT:OFF=1&&5&7&&10,ON=6,SCOPE=GLOBAL; ) ***
267 // *** ***
268 // *** START COMMAND FILE CG.SA.REC74 AGAIN. ***
269 // *** ***
270 // *** CASE 2: ***
271 // *** ======= ***
272 // *** ERROR: L FC 33. ***
273 // *** CORRESPONDING BACKGROUND MEMORY FILES ARE EMPTY. ***
274 // *** ***
275 // *** (ENTER: SETCFOPT:OFF=1&&5&7&&10,ON=6,SCOPE=GLOBAL; ) ***
276 // *** ***
277 // *** START COMMAND FILE CG.SA.REC74 AGAIN. ***
278 // ************************************************************
279 /
280 <REWIND MT:VSN=HISTAP;
281 /
282 <SETCFOPT:OFF=1&&4&6&&10,ON=5,SCOPE=GLOBAL;
283 <SKIPCMD:LABEL=END;
284 /
285 .OUT <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
286 /
287 // ******************************
288 // *** FINISHED THE PROCEDURE ***
289 // ******************************
290 // ********************************************
291 // *** RELOAD MAGNETIC TAPE DEVICE. ***
292 // *** ***
293 // *** SAVING OF HISTORY FILES IS FINISHED. ***
294 // ********************************************
295 /
296 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
297 <SKIPCMD:LABEL=END;
298 /
299 .OUT1 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
300 /

A30808-X3080-C485-5-7620 MMN:SW-COFIP-53
MMN:SW Maintenance
Software

REC74

301 // ******************************
302 // *** FINISHED THE PROCEDURE ***
303 // ******************************
304 // ********************************************
305 // *** RELOAD MAGNETIC TAPE DEVICE. ***
306 // *** ***
307 // *** NO HISTORY FILE FOR SAVING EXISTS. ***
308 // *** ***
309 // *** SAVING OF HISTORY FILES IS FINISHED. ***
310 // ********************************************
311 /
312 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
313 <SKIPCMD:LABEL=END;
314 /
315 .OUT2 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
316 /
317 // ******************************
318 // *** FINISHED THE PROCEDURE ***
319 // ******************************
320 // ********************************************
321 // *** RELOAD MAGNETIC TAPE DEVICE. ***
322 // *** ***
323 // *** NO HISTORY FILE WAS TRANSFERRED. ***
324 // *** ***
325 // *** SAVING OF HISTORY FILES IS FINISHED. ***
326 // ********************************************
327 /
328 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
329 <SKIPCMD:LABEL=END;
330 /
331 .END <SETCFOPT:ACKCFS=ERROR,DANCMD=NOEXEC,ACKREQ=NEG,SCOPE=GLOBAL;
332 <ENDFILE;

MMN:SW-COFIP-54 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

REC75

1 <CMDFILE;
2 /
3 // 80-REC75-01
4 /
5 /****V01***************************************************************
6 /* *
7 /* COMMAND FILE CG.SA.REC75 FOR RESCUE OF BACKGROUND MEMORY DATA *
8 /* ============================================================= *
9 /* *
10 /* TASK DESCRIPTION: *
11 /* ----------------- *
12 /* - SAVING IAR ACCOUNTING FILE ON TAPE *
13 /* *
14 /* HOLD TAPE READY/LOADING MAGNETIC TAPE DEVICE: *
15 /* --------------------------------------------- *
16 /* - A LARGE TAPE WITH WRITE RING IS TO BE HELD READY *
17 /* - BEFORE STARTING THE COMMAND FILE THE MAGNETIC TAPE *
18 /* DEVICE IS TO BE LOADED AND SWITCHED TO ONLINE *
19 /* *
20 /* FAULT HANDLING: *
21 /* --------------- *
22 /* - AFTER INTERRUPTION OF THE FILE PROCESSING VIA FAULT *
23 /* EXITS AND CORRESPONDING FAULT HANDLING THE FILE CAN *
24 /* BE STARTED AGAIN *
25 /* *
26 /* SWITCH PRESETTINGS FOR START POINTS AND ENTRY POINTS: *
27 /* ===================================================== *
28 /* START POINT SWITCH PRESETTINGS *
29 /* ----------- ------------------ *
30 /* RESETCFOPT; *
31 /* *
32 /* M2 SETCFOPT:OFF=1&3&&10,ON=2,SCOPE=GLOBAL; *
33 /* M3 SETCFOPT:OFF=1&2&4&&10,ON=3,SCOPE=GLOBAL; *
34 /* *
35 /* FAULT 01 *
36 /* ELEMINATED SETCFOPT:OFF=1&3&&10,ON=2,SCOPE=GLOBAL; *
37 /* FAULT 01 *
38 /* NOT ELEMINATED SETCFOPT:OFF=1&&3&5&&10,ON=4,SCOPE=GLOBAL; *
39 /* FAULT 02 *
40 /* ELEMINATED SETCFOPT:OFF=1&2&4&&10,ON=3,SCOPE=GLOBAL; *
41 /* FAULT 02 *
42 /* NOT ELEMINATED SETCFOPT:OFF=1&&3&5&&10,ON=4,SCOPE=GLOBAL; *
43 /* *
44 /**********************************************************************
45 /
46 <SETCFOPT:ACKCFS=ERROR,DANCMD=EXEC,ACKREQ=POS,SCOPE=GLOBAL;
47 /
48 <SKIPCMD:LABEL=END,ON=1;
49 <SKIPCMD:LABEL=M2,ON=2;
50 <SKIPCMD:LABEL=M3,ON=3;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-55
MMN:SW Maintenance
Software

REC75

51 <SKIPCMD:LABEL=OUT2,ON=4;
52 /
53 .M1 <STEP;
54 <DISP FILE:FILE=IA.ICIAR;
55 <SKIPCMD:LABEL=M2,OFF=32;
56 <SKIPCMD:LABEL=OUT1;
57 /
58 .M2 <STEP;
59 // ******************************************
60 // * LABELING IAR ACCOUNTING FILE SAVE TAPE *
61 // ******************************************
62 /
63 <INIT MT:VSN=IARTAP,MTD=00,CD=ISO,DENS=6250;
64 <SKIPCMD:LABEL=AB1,ON=32;
65 /
66 .M3 <STEP;
67 //
68 // **********************************************
69 // * TAPE SAVING OF IAR ACCOUNTING FILE STARTED *
70 // **********************************************
71 /
72 <TRANS FILE:VSNR=IARTAP,COPMOD=POST,FILE=IA.ICIAR;
73 <SKIPCMD:LABEL=AB2,ON=32;
74 /
75 .M4 <STEP;
76 //
77 // ********************************************
78 // * TAPE SAVING OF IAR ACCOUNTING FILE ENDED *
79 // ********************************************
80 /
81 <REWIND MT:VSN=IARTAP;
82 /
83 .M5 <STEP;
84 //
85 // ************************************************
86 // * DISPLAYING IAR ACCOUNTING FILE TAPE CONTENTS *
87 // ************************************************
88 /
89 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
90 <DISP FILE:VSN=IARTAP;
91 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
92 /
93 <SKIPCMD:LABEL=OUT;
94 / *******************************
95 / * FAULT EXITS AND END MESSAGE *
96 / *******************************
97 /
98 .AB1 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
99 // ****************
100 // *** FAULT 01 ***

MMN:SW-COFIP-56 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

REC75

101 // ****************
102 // ************************************************************
103 // *** LABELING IAR ACCOUNTINGFILE SAVE TAPE NOT EXECUTED. ***
104 // *** TAPE DEVICE OFFLINE OR DEFECTIVE OR TAPE DAMAGED: ***
105 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
106 // *** ***
107 // *** START COMMAND FILE CG.SA.REC75 AGAIN. ***
108 // *** ***
109 // *** (IF ELIMINATING OF FAULTS NOT POSSIBLE, ) ***
110 // *** (ENTER: SETCFOPT:OFF=1&&3&5&&10,ON=4,SCOPE=GLOBAL; ) ***
111 // *** ***
112 // *** START COMMAND FILE CG.SA.REC75 AGAIN. ***
113 // ************************************************************
114 /
115 <REWIND MT:VSN=IARTAP;
116 /
117 <SETCFOPT:OFF=1&3&&10,ON=2,SCOPE=GLOBAL;
118 <SKIPCMD:LABEL=END;
119 /
120 .AB2 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
121 // ****************
122 // *** FAULT 02 ***
123 // ****************
124 // ************************************************************
125 // *** TAPE SAVING OF IAR ACCOUNTING FILE NOT EXECUTED. ***
126 // *** ***
127 // *** CASE 1: ***
128 // *** ======= ***
129 // *** TAPE DEVICE OFFLINE OR DEFECTIVE OR TAPE DAMAGED: ***
130 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
131 // *** ***
132 // *** START COMMAND FILE CG.SA.REC75 AGAIN. ***
133 // *** ***
134 // *** (IF ELIMINATING OF FAULTS NOT POSSIBLE, ) ***
135 // *** (ENTER: SETCFOPT:OFF=1&&3&5&&10,ON=4,SCOPE=GLOBAL; ) ***
136 // *** ***
137 // *** START COMMAND FILE CG.SA.REC75 AGAIN. ***
138 // *** ***
139 // *** CASE 2: ***
140 // *** ======= ***
141 // *** ERROR: L FC 33. ***
142 // *** CORRESPONDING BACKGROUND MEMORY FILES ARE EMPTY. ***
143 // *** ***
144 // *** (ENTER: SETCFOPT:OFF=1&&3&5&&10,ON=4,SCOPE=GLOBAL; ) ***
145 // *** ***
146 // *** START COMMAND FILE CG.SA.REC75 AGAIN. ***
147 // ************************************************************
148 /
149 <REWIND MT:VSN=IARTAP;
150 /

A30808-X3080-C485-5-7620 MMN:SW-COFIP-57
MMN:SW Maintenance
Software

REC75

151 <SETCFOPT:OFF=1&2&4&&10,ON=3,SCOPE=GLOBAL;
152 <SKIPCMD:LABEL=END;
153 /
154 .OUT <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
155 /
156 // ******************************
157 // *** FINISHED THE PROCEDURE ***
158 // ******************************
159 // **************************************************
160 // *** RELOAD MAGNETIC TAPE DEVICE. ***
161 // *** ***
162 // *** SAVING OF IAR ACCOUNTING FILE IS FINISHED. ***
163 // **************************************************
164 /
165 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
166 <SKIPCMD:LABEL=END;
167 /
168 .OUT1 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
169 /
170 // ******************************
171 // *** FINISHED THE PROCEDURE ***
172 // ******************************
173 // **************************************************
174 // *** RELOAD MAGNETIC TAPE DEVICE. ***
175 // *** ***
176 // *** NO IAR ACCOUNTING FILE FOR SAVING EXISTS. ***
177 // *** ***
178 // *** SAVING OF IAR ACCOUNTING FILE IS FINISHED. ***
179 // **************************************************
180 /
181 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
182 <SKIPCMD:LABEL=END;
183 /
184 .OUT2 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
185 /
186 // ******************************
187 // *** FINISHED THE PROCEDURE ***
188 // ******************************
189 // **************************************************
190 // *** RELOAD MAGNETIC TAPE DEVICE. ***
191 // *** ***
192 // *** NO IAR ACCOUNTING FILE WAS TRANSFERRED. ***
193 // *** ***
194 // *** SAVING OF IAR ACCOUNTING FILE IS FINISHED. ***
195 // **************************************************
196 /
197 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
198 <SKIPCMD:LABEL=END;
199 /
200 .END <SETCFOPT:ACKCFS=ERROR,DANCMD=NOEXEC,ACKREQ=NEG,SCOPE=GLOBAL;

MMN:SW-COFIP-58 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

REC75

201 <ENDFILE;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-59
MMN:SW Maintenance
Software

REC76

1 <CMDFILE;
2 /
3 // 80-REC76-01
4 /
5 /****V01***************************************************************
6 /* *
7 /* COMMAND FILE CG.SA.REC76 FOR RESCUE OF BACKGROUND MEMORY DATA *
8 /* ============================================================= *
9 /* *
10 /* TASK DESCRIPTION: *
11 /* ----------------- *
12 /* - SAVING LOGICAL METER FILES ON MO *
13 /* - SAVING LOG DATA FILES ON MO *
14 /* - SAVING HISTORY FILES ON MO *
15 /* *
16 /* HOLD MO READY/LOADING LOADMOD STATION: *
17 /* ---------------------------------- *
18 /* - A MOD (MAGNETO OPTICAL DISK) WITHOUT WRITE PROTECT *
19 /* IS TO BE HELD READY *
20 /* - BEFORE STARTING THE COMMAND FILE THE MOD STATION *
21 /* IS TO BE LOADED *
22 /* *
23 /* FAULT HANDLING: *
24 /* --------------- *
25 /* - AFTER INTERRUPTION OF THE FILE PROCESSING VIA FAULT *
26 /* EXITS AND CORRESPONDING FAULT HANDLING THE FILE CAN *
27 /* BE STARTED AGAIN *
28 /* *
29 /* SWITCH PRESETTINGS FOR START POINTS AND ENTRY POINTS: *
30 /* ===================================================== *
31 /* START POINT SWITCH PRESETTINGS *
32 /* ----------- ------------------ *
33 /* RESETCFOPT; *
34 /* *
35 /* M2 SETCFOPT:OFF=1&3&&10,ON=2,SCOPE=GLOBAL; *
36 /* M3 SETCFOPT:OFF=1&2&4&&10,ON=3,SCOPE=GLOBAL; *
37 /* M5 SETCFOPT:OFF=1&&8&10,ON=9,SCOPE=GLOBAL; *
38 /* M7 SETCFOPT:OFF=1&&3&5&&10,ON=4,SCOPE=GLOBAL; *
39 /* M9 SETCFOPT:OFF=1&&4&6&&10,ON=5,SCOPE=GLOBAL; *
40 /* MB SETCFOPT:OFF=1&&5&7&&10,ON=6,SCOPE=GLOBAL; *
41 /* MD SETCFOPT:OFF=1&&6&8&&10,ON=7,SCOPE=GLOBAL; *
42 /* *
43 /* FAULT 01 *
44 /* ELEMINATED SETCFOPT:OFF=1&3&&10,ON=2,SCOPE=GLOBAL; *
45 /* FAULT 01 *
46 /* NOT ELEMINATED SETCFOPT:OFF=1&&7&9&10,ON=8,SCOPE=GLOBAL; *
47 /* FAULT 02 *
48 /* ELEMINATED SETCFOPT:OFF=1&2&4&&10,ON=3,SCOPE=GLOBAL; *
49 /* FAULT 02 *
50 /* NOT ELEMINATED SETCFOPT:OFF=1&&8&10,ON=9,SCOPE=GLOBAL; *

MMN:SW-COFIP-60 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

REC76

51 /* FAULT 03 *
52 /* ELEMINATED SETCFOPT:OFF=1&&3&5&&10,ON=4,SCOPE=GLOBAL; *
53 /* FAULT 03 *
54 /* NOT ELEMINATED SETCFOPT:OFF=1&&4&6&&10,ON=5,SCOPE=GLOBAL; *
55 /* FAULT 04 *
56 /* ELEMINATED SETCFOPT:OFF=1&&4&6&&10,ON=5,SCOPE=GLOBAL; *
57 /* FAULT 04 *
58 /* NOT ELEMINATED *
59 /* OR *
60 /* FILES EMPTY SETCFOPT:OFF=1&&5&7&&10,ON=6,SCOPE=GLOBAL; *
61 /* FAULT 05 *
62 /* ELEMINATED SETCFOPT:OFF=1&&5&7&&10,ON=6,SCOPE=GLOBAL; *
63 /* FAULT 05 *
64 /* NOT ELEMINATED *
65 /* OR *
66 /* FILES EMPTY SETCFOPT:OFF=1&&6&8&&10,ON=7,SCOPE=GLOBAL; *
67 /* FAULT 06 *
68 /* ELEMINATED SETCFOPT:OFF=1&&6&8&&10,ON=7,SCOPE=GLOBAL; *
69 /* FAULT 06 *
70 /* NOT ELEMINATED *
71 /* OR *
72 /* FILES EMPTY SETCFOPT:OFF=1&&9,ON=10,SCOPE=GLOBAL; *
73 /* *
74 /**********************************************************************
75 /
76 <SETCFOPT:ACKCFS=ERROR,DANCMD=EXEC,ACKREQ=POS,SCOPE=GLOBAL;
77 /
78 <SKIPCMD:LABEL=END,ON=1;
79 <SKIPCMD:LABEL=M2,ON=2;
80 <SKIPCMD:LABEL=M3,ON=3;
81 <SKIPCMD:LABEL=M5,ON=9;
82 <SKIPCMD:LABEL=M7,ON=4;
83 <SKIPCMD:LABEL=M9,ON=5;
84 <SKIPCMD:LABEL=MB,ON=6;
85 <SKIPCMD:LABEL=MD,ON=7;
86 <SKIPCMD:LABEL=OUT1,ON=8;
87 <SKIPCMD:LABEL=MF,ON=10;
88 /
89 .M1 <STEP;
90 /
91 .T1 <DISP FILE:FILE=CA.;
92 <SKIPCMD:LABEL=T2,ON=32;
93 <SKIPCMD:LABEL=M2;
94 .T2 <DISP FILE:FILE=LG.;
95 <SKIPCMD:LABEL=T3,ON=32;
96 <SKIPCMD:LABEL=M2;
97 .T3 <DISP FILE:FILE=SG.;
98 <SKIPCMD:LABEL=T4,ON=32;
99 <SKIPCMD:LABEL=M2;
100 .T4 <DISP FILE:FILE=HF.;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-61
MMN:SW Maintenance
Software

REC76

101 <SKIPCMD:LABEL=T5,ON=32;
102 <SKIPCMD:LABEL=M2;
103 .T5 <DISP FILE:FILE=TM.;
104 <SKIPCMD:LABEL=T6,ON=32;
105 <SKIPCMD:LABEL=M2;
106 .T6 <SKIPCMD:LABEL=OUT2;
107 /
108 .M2 <STEP;
109 /
110 // **********************
111 // * LABELING SAVING MO *
112 // **********************
113 /
114 <INIT MO:VSN=RESMOD,MOD=00,CD=EBC;
115 <SKIPCMD:LABEL=AB1,ON=32;
116 /
117 .M3 <STEP;
118 <DISP FILE:FILE=CA.;
119 <SKIPCMD:LABEL=M5,ON=32;
120 /
121 // ************************************
122 // * MO SAVING OF METER FILES STARTED *
123 // ************************************
124 /
125 .T31 <DISP FILE:FILE=CA.SU.UCHA;
126 <SKIPCMD:LABEL=T32,ON=32;
127 <TRANS FILE:VSNR=RESMOD,COPMOD=SSWF,FILE=CA.SU.UCHA;
128 <SKIPCMD:LABEL=AB2,ON=32;
129 .T32 <DISP FILE:FILE=CA.ST.UCHA;
130 <SKIPCMD:LABEL=T33,ON=32;
131 <TRANS FILE:VSNR=RESMOD,COPMOD=SSWF,FILE=CA.ST.UCHA;
132 <SKIPCMD:LABEL=AB2,ON=32;
133 .T33 <DISP FILE:FILE=CA.TF.UCHA;
134 <SKIPCMD:LABEL=T34,ON=32;
135 <TRANS FILE:VSNR=RESMOD,COPMOD=SSWF,FILE=CA.TF.UCHA;
136 <SKIPCMD:LABEL=AB2,ON=32;
137 .T34 <DISP FILE:FILE=CA.TR.UCHA;
138 <SKIPCMD:LABEL=T35,ON=32;
139 <TRANS FILE:VSNR=RESMOD,COPMOD=SSWF,FILE=CA.TR.UCHA;
140 <SKIPCMD:LABEL=AB2,ON=32;
141 .T35 <DISP FILE:FILE=CA.IC.UCHA;
142 <SKIPCMD:LABEL=M4,ON=32;
143 <MOD FILEAUT:FILE=CA.IC.UCHA,AR=NODEL&NOWR&NOCN;
144 <TRANS FILE:VSNR=RESMOD,COPMOD=SSWF,FILE=CA.IC.UCHA;
145 <SKIPCMD:LABEL=AB2,ON=32;
146 /
147 .M4 <STEP;
148 <SETCFOPT:ON=11;
149 /
150 // **********************************

MMN:SW-COFIP-62 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

REC76

151 // * MO SAVING OF METER FILES ENDED *

152 // **********************************
153 /
154 .M5 <STEP;
155 <DISP FILE:FILE=LG.;
156 <SKIPCMD:LABEL=M9,ON=32;
157 /
158 .M6 <STEP;
159 <RSET LOG;
160 /
161 .M7 <STEP;
162 /
163 // ***************************************
164 // * MO SAVING OF LOG DATA FILES STARTED *
165 // ***************************************
166 /
167 <TRANS FILE:VSNR=RESMOD,FILE=LG.;
168 <SKIPCMD:LABEL=AB3,ON=32;
169 /
170 <DISP FILE:FILE=LQ.;
171 <SKIPCMD:LABEL=M8,ON=32;
172 /
173 <TRANS FILE:VSNR=RESMOD,FILE=LQ.;
174 <SKIPCMD:LABEL=AB3,ON=32;
175 /
176 .M8 <STEP;
177 <SETCFOPT:ON=12;
178 /
179 // *************************************
180 // * MO SAVING OF LOG DATA FILES ENDED *
181 // *************************************
182 /
183 .M9 <STEP;
184 <DISP FILE:FILE=SG.;
185 <SKIPCMD:LABEL=MB,ON=32;
186 /
187 //
188 // *****************************************
189 // * MO SAVING OF SG-HISTORY FILES STARTED *
190 // *****************************************
191 /
192 <TRANS FILE:VSNR=RESMOD,FILE=SG.;
193 <SKIPCMD:LABEL=AB4,ON=32;
194 /
195 .MA <STEP;
196 <SETCFOPT:ON=13;
197 /
198 //
199 // ***************************************
200 // * MO SAVING OF SG-HISTORY FILES ENDED *

A30808-X3080-C485-5-7620 MMN:SW-COFIP-63
MMN:SW Maintenance
Software

REC76

201 // ***************************************
202 /
203 .MB <STEP;
204 <DISP FILE:FILE=HF.;
205 <SKIPCMD:LABEL=MD,ON=32;
206 /
207 //
208 // *****************************************
209 // * MO SAVING OF HF-HISTORY FILES STARTED *
210 // *****************************************
211 /
212 <TRANS FILE:VSNR=RESMOD,FILE=HF.;
213 <SKIPCMD:LABEL=AB5,ON=32;
214 /
215 .MC <STEP;
216 <SETCFOPT:ON=14;
217 /
218 //
219 // ***************************************
220 // * MO SAVING OF HF-HISTORY FILES ENDED *
221 // ***************************************
222 /
223 .MD <STEP;
224 <DISP FILE:FILE=TM.;
225 <SKIPCMD:LABEL=MF,ON=32;
226 /
227 //
228 // *****************************************
229 // * MO SAVING OF TM-HISTORY FILES STARTED *
230 // *****************************************
231 /
232 <TRANS FILE:VSNR=RESMOD,FILE=TM.;
233 <SKIPCMD:LABEL=AB6,ON=32;
234 /
235 .ME <STEP;
236 <SETCFOPT:ON=15;
237 /
238 //
239 // ***************************************
240 // * MO SAVING OF TM-HISTORY FILES ENDED *
241 // ***************************************
242 /
243 .MF <STEP;
244 <RSET MO:VSN=RESMOD;
245 /
246 .TF1 <SKIPCMD:LABEL=TF2,OFF=11;
247 <SKIPCMD:LABEL=MG;
248 .TF2 <SKIPCMD:LABEL=TF3,OFF=12;
249 <SKIPCMD:LABEL=MG;
250 .TF3 <SKIPCMD:LABEL=TF4,OFF=13;

MMN:SW-COFIP-64 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

REC76

251 <SKIPCMD:LABEL=MG;
252 .TF4 <SKIPCMD:LABEL=TF5,OFF=14;
253 <SKIPCMD:LABEL=MG;
254 .TF5 <SKIPCMD:LABEL=TF6,OFF=15;
255 <SKIPCMD:LABEL=MG;
256 .TF6 <SKIPCMD:LABEL=OUT3;
257 /
258 .MG <STEP;
259 // **************************
260 // * DISPLAYING MO CONTENTS *
261 // **************************
262 /
263 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
264 <DISP FILE:VSN=RESMOD;
265 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
266 /
267 <SKIPCMD:LABEL=OUT;
268 / *******************************
269 / * FAULT EXITS AND END MESSAGE *
270 / *******************************
271 /
272 .AB1 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
273 // ****************
274 // *** FAULT 01 ***
275 // ****************
276 // ************************************************************
277 // *** LABELING SAVING MO NOT EXECUTED. ***
278 // *** ***
279 // *** MOD STATION IS DEFECTIVE OR MO IS DAMAGED: ***
280 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
281 // *** ***
282 // *** START COMMAND FILE CG.SA.REC76 AGAIN. ***
283 // *** ***
284 // *** (IF ELIMINATING OF FAULTS NOT POSSIBLE, ) ***
285 // *** (ENTER: SETCFOPT:OFF=1&&7&9&10,ON=8,SCOPE=GLOBAL; ) ***
286 // *** ***
287 // *** START COMMAND FILE CG.SA.REC76 AGAIN. ***
288 // ************************************************************
289 /
290 <RSET MO:VSN=RESMOD;
291 /
292 <SETCFOPT:OFF=1&3&&10,ON=2,SCOPE=GLOBAL;
293 <SKIPCMD:LABEL=END;
294 /
295 .AB2 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
296 // ****************
297 // *** FAULT 02 ***
298 // ****************
299 // ************************************************************
300 // *** MO SAVING OF LOGICAL METER FILES NOT EXECUTED. ***

A30808-X3080-C485-5-7620 MMN:SW-COFIP-65
MMN:SW Maintenance
Software

REC76

301 // *** ***

302 // *** MOD STATION IS DEFECTIVE OR MO IS DAMAGED: ***
303 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
304 // *** ***
305 // *** START COMMAND FILE CG.SA.REC76 AGAIN. ***
306 // *** ***
307 // *** (IF ELIMINATING OF FAULTS NOT POSSIBLE, ) ***
308 // *** (ENTER: SETCFOPT:OFF=1&&8&10,ON=9,SCOPE=GLOBAL; ) ***
309 // *** ***
310 // *** START COMMAND FILE CG.SA.REC76 AGAIN. ***
311 // ************************************************************
312 /
313 <RSET MO:VSN=RESMOD;
314 /
315 <SETCFOPT:OFF=1&2&4&&10,ON=3,SCOPE=GLOBAL;
316 <SKIPCMD:LABEL=END;
317 /
318 .AB3 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
319 // ****************
320 // *** FAULT 03 ***
321 // ****************
322 // ************************************************************
323 // *** MO SAVING OF LOG DATA FILES NOT EXECUTED. ***
324 // *** ***
325 // *** MOD STATION IS DEFECTIVE OR MO IS DAMAGED: ***
326 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
327 // *** ***
328 // *** START COMMAND FILE CG.SA.REC76 AGAIN. ***
329 // *** ***
330 // *** (IF ELIMINATING OF FAULTS NOT POSSIBLE, ) ***
331 // *** (ENTER: SETCFOPT:OFF=1&&4&6&&10,ON=5,SCOPE=GLOBAL; ) ***
332 // *** ***
333 // *** START COMMAND FILE CG.SA.REC76 AGAIN. ***
334 // ************************************************************
335 /
336 <RSET MO:VSN=RESMOD;
337 /
338 <SETCFOPT:OFF=1&&3&5&&10,ON=4,SCOPE=GLOBAL;
339 <SKIPCMD:LABEL=END;
340 /
341 .AB4 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
342 // ****************
343 // *** FAULT 04 ***
344 // ****************
345 // ************************************************************
346 // *** MO SAVING OF SG-HISTORY FILES NOT EXECUTED. ***
347 // *** ***
348 // *** CASE 1: ***
349 // *** ======= ***
350 // *** MOD STATION IS DEFECTIVE OR MO IS DAMAGED: ***

MMN:SW-COFIP-66 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

REC76

351 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***

352 // *** ***
353 // *** START COMMAND FILE CG.SA.REC76 AGAIN. ***
354 // *** ***
355 // *** (IF ELIMINATING OF FAULTS NOT POSSIBLE, ) ***
356 // *** (ENTER: SETCFOPT:OFF=1&&5&7&&10,ON=6,SCOPE=GLOBAL; ) ***
357 // *** ***
358 // *** START COMMAND FILE CG.SA.REC76 AGAIN. ***
359 // *** ***
360 // *** CASE 2: ***
361 // *** ======= ***
362 // *** ERROR: L FC 33. ***
363 // *** CORRESPONDING BACKGROUND MEMORY FILES ARE EMPTY. ***
364 // *** ***
365 // *** (ENTER: SETCFOPT:OFF=1&&5&7&&10,ON=6,SCOPE=GLOBAL; ) ***
366 // *** ***
367 // *** START COMMAND FILE CG.SA.REC76 AGAIN. ***
368 // ************************************************************
369 /
370 <RSET MO:VSN=RESMOD;
371 /
372 <SETCFOPT:OFF=1&&4&6&&10,ON=5,SCOPE=GLOBAL;
373 <SKIPCMD:LABEL=END;
374 /
375 .AB5 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
376 // ****************
377 // *** FAULT 05 ***
378 // ****************
379 // ************************************************************
380 // *** MO SAVING OF HF-HISTORY FILES NOT EXECUTED. ***
381 // *** ***
382 // *** CASE 1: ***
383 // *** ======= ***
384 // *** MOD STATION IS DEFECTIVE OR MO IS DAMAGED: ***
385 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
386 // *** ***
387 // *** START COMMAND FILE CG.SA.REC76 AGAIN. ***
388 // *** ***
389 // *** (IF ELIMINATING OF FAULTS NOT POSSIBLE, ) ***
390 // *** (ENTER: SETCFOPT:OFF=1&&6&8&&10,ON=7,SCOPE=GLOBAL; ) ***
391 // *** ***
392 // *** START COMMAND FILE CG.SA.REC76 AGAIN. ***
393 // *** ***
394 // *** CASE 2: ***
395 // *** ======= ***
396 // *** ERROR: L FC 33. ***
397 // *** CORRESPONDING BACKGROUND MEMORY FILES ARE EMPTY. ***
398 // *** ***
399 // *** (ENTER: SETCFOPT:OFF=1&&6&8&&10,ON=7,SCOPE=GLOBAL; ) ***
400 // *** ***

A30808-X3080-C485-5-7620 MMN:SW-COFIP-67
MMN:SW Maintenance
Software

REC76

401 // *** START COMMAND FILE CG.SA.REC76 AGAIN. ***

402 // ************************************************************
403 /
404 <RSET MO:VSN=RESMOD;
405 /
406 <SETCFOPT:OFF=1&&5&7&&10,ON=6,SCOPE=GLOBAL;
407 <SKIPCMD:LABEL=END;
408 /
409 .AB6 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
410 // ****************
411 // *** FAULT 06 ***
412 // ****************
413 // ************************************************************
414 // *** MO SAVING OF TM-HISTORY FILES NOT EXECUTED. ***
415 // *** ***
416 // *** CASE 1: ***
417 // *** ======= ***
418 // *** MOD STATION IS DEFECTIVE OR MO IS DAMAGED: ***
419 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
420 // *** ***
421 // *** START COMMAND FILE CG.SA.REC76 AGAIN. ***
422 // *** ***
423 // *** (IF ELIMINATING OF FAULTS NOT POSSIBLE, ) ***
424 // *** (ENTER: SETCFOPT:OFF=1&&9,ON=10,SCOPE=GLOBAL; ) ***
425 // *** ***
426 // *** START COMMAND FILE CG.SA.REC76 AGAIN. ***
427 // *** ***
428 // *** CASE 2: ***
429 // *** ======= ***
430 // *** ERROR: L FC 33. ***
431 // *** CORRESPONDING BACKGROUND MEMORY FILES ARE EMPTY. ***
432 // *** ***
433 // *** (ENTER: SETCFOPT:OFF=1&&9,ON=10,SCOPE=GLOBAL; ) ***
434 // *** ***
435 // *** START COMMAND FILE CG.SA.REC76 AGAIN. ***
436 // ************************************************************
437 /
438 <RSET MO:VSN=RESMOD;
439 /
440 <SETCFOPT:OFF=1&&6&8&&10,ON=7,SCOPE=GLOBAL;
441 <SKIPCMD:LABEL=END;
442 /
443 .OUT <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
444 // *******************************
445 // *** FINISHED WITHOUT FAULTS ***
446 // *******************************
447 // ********************************************************
448 .OUT11 <SKIPCMD:LABEL=OUT12,OFF=11;
449 // *** METER FILES WERE RESCUED FOR INCORPORATION ***
450 // *** IN PROCEDURE EY151. ***

MMN:SW-COFIP-68 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

REC76

451 // *** ***

452 .OUT12 <SKIPCMD:LABEL=OUT13,OFF=12;
453 // *** LOG DATA FILES WERE RESCUED FOR INCORPORATION ***
454 // *** IN PROCEDURE EY151. ***
455 // *** ***
456 .OUT13 <SKIPCMD:LABEL=OUT14,OFF=13;
457 // *** SG-HISTORY FILES WERE RESCUED FOR ***
458 // *** TRANSFER TO TAC. ***
459 // *** ***
460 .OUT14 <SKIPCMD:LABEL=OUT15,OFF=14;
461 // *** HF-HISTORY FILES WERE RESCUED FOR ***
462 // *** TRANSFER TO TAC. ***
463 // *** ***
464 .OUT15 <SKIPCMD:LABEL=OUT16,OFF=15;
465 // *** TM-HISTORY FILES WERE RESCUED FOR ***
466 // *** TRANSFER TO TAC. ***
467 // *** ***
468 .OUT16 <STEP;
469 // *** RELOAD MOD STATION. ***
470 // *** ***
471 // *** RESCUE OF BACKGROUND MEMORY DATA IS FINISHED. ***
472 // ********************************************************
473 /
474 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
475 <SKIPCMD:LABEL=END;
476 /
477 .OUT1 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
478 // ****************************
479 // *** FINISHED WITH FAULTS ***
480 // ****************************
481 // *******************************************************
482 // *** MOD STATION IS DEFECTIVE. ***
483 // *** ***
484 // *** NO FILES WERE TRANSFERRED. ***
485 // *** ***
486 // *** RELOAD MOD STATION. ***
487 // *** ***
488 // *** RESCUE OF BACKGROUND MEMORY DATA IS FINISHED. ***
489 // *******************************************************
490 /
491 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
492 <SKIPCMD:LABEL=END;
493 /
494 .OUT2 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
495 // ****************************
496 // *** FINISHED WITH FAULTS ***
497 // ****************************
498 // *******************************************************
499 // *** NO FILES ARE AVAILABLE. ***
500 // *** ***

A30808-X3080-C485-5-7620 MMN:SW-COFIP-69
MMN:SW Maintenance
Software

REC76

501 // *** RELOAD MOD STATION. ***

502 // *** ***
503 // *** RESCUE OF BACKGROUND MEMORY DATA IS FINISHED. ***
504 // *******************************************************
505 /
506 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
507 <SKIPCMD:LABEL=END;
508 /
509 .OUT3 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
510 // ****************************
511 // *** FINISHED WITH FAULTS ***
512 // ****************************
513 // *******************************************************
514 // *** NO FILES WERE TRANSFERRED. ***
515 // *** ***
516 // *** RELOAD MOD STATION. ***
517 // *** ***
518 // *** RESCUE OF BACKGROUND MEMORY DATA IS FINISHED. ***
519 // *******************************************************
520 /
521 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
522 <SKIPCMD:LABEL=END;
523 /
524 .END <SETCFOPT:ACKCFS=ERROR,DANCMD=NOEXEC,ACKREQ=NEG,SCOPE=GLOBAL;
525 <ENDFILE;

MMN:SW-COFIP-70 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

REC77

1 <CMDFILE;
2 /
3 // 80-REC77-05
4 /
5 /****V05***************************************************************
6 /* *
7 /* COMMAND FILE CG.SA.REC77 FOR RESCUE OF BACKGROUND MEMORY DATA *
8 /* ============================================================= *
9 /* *
10 /* TASK DESCRIPTION: *
11 /* ----------------- *
12 /* - SAVING AMA ACCOUNTING FILE ON MO *
13 /* - SAVING IAR ACCOUNTING FILE ON MO *
14 /* - SAVING INA ACCOUNTING FILE ON MO *
15 /* - SAVING RIVSTAT ACCOUNTING FILE ON MO *
16 /* *
17 /* HOLD MO READY/LOADING LOADMOD STATION: *
18 /* ---------------------------------- *
19 /* - A MOD (MAGNETO OPTICAL DISK) WITHOUT WRITE PROTECT *
20 /* IS TO BE HELD READY *
21 /* - BEFORE STARTING THE COMMAND FILE THE MOD STATION *
22 /* IS TO BE LOADED *
23 /* *
24 /* FAULT HANDLING: *
25 /* --------------- *
26 /* - AFTER INTERRUPTION OF THE FILE PROCESSING VIA FAULT *
27 /* EXITS AND CORRESPONDING FAULT HANDLING THE FILE CAN *
28 /* BE STARTED AGAIN *
29 /* *
30 /* SWITCH PRESETTINGS FOR START POINTS AND ENTRY POINTS: *
31 /* ===================================================== *
32 /* START POINT SWITCH PRESETTINGS *
33 /* ----------- ------------------ *
34 /* RESETCFOPT; *
35 /* *
36 /* M2 SETCFOPT:OFF=1&3&&10,ON=2,SCOPE=GLOBAL; *
37 /* M3 SETCFOPT:OFF=1&2&4&&10,ON=3,SCOPE=GLOBAL; *
38 /* M5 SETCFOPT:OFF=1&&3&5&&10,ON=4,SCOPE=GLOBAL; *
39 /* M7 SETCFOPT:OFF=1&&5&7&&10,ON=6,SCOPE=GLOBAL; *
40 /* M9 SETCFOPT:OFF=1&&6&8&&10,ON=7,SCOPE=GLOBAL; *
41 /* *
42 /* FAULT 01 *
43 /* ELEMINATED SETCFOPT:OFF=1&3&&10,ON=2,SCOPE=GLOBAL; *
44 /* FAULT 01 *
45 /* NOT ELEMINATED SETCFOPT:OFF=1&&4&6&&10,ON=5,SCOPE=GLOBAL; *
46 /* FAULT 02 *
47 /* ELEMINATED SETCFOPT:OFF=1&2&4&&10,ON=3,SCOPE=GLOBAL; *
48 /* FAULT 02 *
49 /* NOT ELEMINATED *
50 /* OR *

A30808-X3080-C485-5-7620 MMN:SW-COFIP-71
MMN:SW Maintenance
Software

REC77

51 /* FILES EMPTY SETCFOPT:OFF=1&&3&5&&10,ON=4,SCOPE=GLOBAL; *

52 /* FAULT 03 *
53 /* ELEMINATED SETCFOPT:OFF=1&&3&5&&10,ON=4,SCOPE=GLOBAL; *
54 /* FAULT 03 *
55 /* NOT ELEMINATED *
56 /* OR *
57 /* FILES EMPTY SETCFOPT:OFF=1&&5&7&&10,ON=6,SCOPE=GLOBAL; *
58 /* FAULT 04 *
59 /* ELEMINATED SETCFOPT:OFF=1&&5&7&&10,ON=6,SCOPE=GLOBAL; *
60 /* FAULT 04 *
61 /* NOT ELEMINATED *
62 /* OR *
63 /* NOT ELEMINATED SETCFOPT:OFF=1&&6&8&&10,ON=7,SCOPE=GLOBAL; *
64 /* FAULT 05 *
65 /* ELEMINATED SETCFOPT:OFF=1&&6&8&&10,ON=7,SCOPE=GLOBAL; *
66 /* FAULT 05 *
67 /* NOT ELEMINATED SETCFOPT:OFF=1&&7&9&&10,ON=8,SCOPE=GLOBAL; *
68 /* *
69 /**********************************************************************
70 /
71 <SETCFOPT:ACKCFS=ERROR,DANCMD=EXEC,ACKREQ=POS,SCOPE=GLOBAL;
72 /
73 <SKIPCMD:LABEL=END,ON=1;
74 <SKIPCMD:LABEL=M2,ON=2;
75 <SKIPCMD:LABEL=M3,ON=3;
76 <SKIPCMD:LABEL=M5,ON=4;
77 <SKIPCMD:LABEL=OUT1,ON=5;
78 <SKIPCMD:LABEL=M7,ON=6;
79 <SKIPCMD:LABEL=M9,ON=7;
80 <SKIPCMD:LABEL=MB,ON=8;
81 /
82 .M1 <STEP;
83 /
84 .T1 <DISP FILE:FILE=IA.ICAMA;
85 <SKIPCMD:LABEL=T2,ON=32;
86 <SKIPCMD:LABEL=M2;
87 .T2 <DISP FILE:FILE=IA.ICIAR;
88 <SKIPCMD:LABEL=T3,ON=32;
89 <SKIPCMD:LABEL=M2;
90 .T3 <DISP FILE:FILE=IR.;
91 <SKIPCMD:LABEL=T4,ON=32;
92 <SKIPCMD:LABEL=M2;
93 .T4 <SKIPCMD:LABEL=OUT2;
94 /
95 .M2 <STEP;
96 /
97 // **********************
98 // * LABELING SAVING MO *
99 // **********************
100 /

MMN:SW-COFIP-72 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

REC77

101 <INIT MO:VSN=AMAMOD,MOD=00,CD=EBC;

102 <SKIPCMD:LABEL=AB1,ON=32;
103 /
104 .M3 <STEP;
105 <DISP FILE:FILE=IA.ICAMA;
106 <SKIPCMD:LABEL=M5,ON=32;
107 /
108 // *********************************
109 // * MO SAVING OF AMA FILE STARTED *
110 // *********************************
111 /
112 <TRANS FILE:VSNR=AMAMOD,COPMOD=POST,FILE=IA.ICAMA;
113 <SKIPCMD:LABEL=AB2,ON=32;
114 /
115 .M4 <STEP;
116 <SETCFOPT:ON=11;
117 /
118 // *******************************
119 // * MO SAVING OF AMA FILE ENDED *
120 // *******************************
121 /
122 .M5 <STEP;
123 <DISP FILE:FILE=IA.ICIAR;
124 <SKIPCMD:LABEL=M7,ON=32;
125 /
126 // *********************************
127 // * MO SAVING OF IAR FILE STARTED *
128 // *********************************
129 /
130 <TRANS FILE:VSNR=AMAMOD,COPMOD=POST,FILE=IA.ICIAR;
131 <SKIPCMD:LABEL=AB3,ON=32;
132 /
133 .M6 <STEP;
134 <SETCFOPT:ON=12;
135 /
136 // *******************************
137 // * MO SAVING OF IAR FILE ENDED *
138 // *******************************
139 /
140 .M7 <STEP;
141 <DISP FILE:FILE=IA.ICINA;
142 <SKIPCMD:LABEL=M9,ON=32;
143 /
144 // *********************************
145 // * MO SAVING OF INA FILE STARTED *
146 // *********************************
147 /
148 <TRANS FILE:VSNR=AMAMOD,COPMOD=POST,FILE=IA.ICINA;
149 <SKIPCMD:LABEL=AB4,ON=32;
150 /

A30808-X3080-C485-5-7620 MMN:SW-COFIP-73
MMN:SW Maintenance
Software

REC77

151 .M8 <STEP;

152 <SETCFOPT:ON=13;
153 /
154 // *******************************
155 // * MO SAVING OF INA FILE ENDED *
156 // *******************************
157 /
158 .M9 <STEP;
159 <DISP FILE:FILE=IR.;
160 <SKIPCMD:LABEL=MB,ON=32;
161 /
162 // *************************************
163 // * MO SAVING OF RIVSTAT FILE STARTED *
164 // *************************************
165 /
166 <TRANS FILE:VSNR=AMAMOD,COPMOD=POST,FILE=IR.;
167 <SKIPCMD:LABEL=AB5,ON=32;
168 /
169 .MA <STEP;
170 <SETCFOPT:ON=14;
171 /
172 // ***********************************
173 // * MO SAVING OF RIVSTAT FILE ENDED *
174 // ***********************************
175 /
176 .MB <STEP;
177 <RSET MO:VSN=AMAMOD;
178 /
179 .TB1 <SKIPCMD:LABEL=TB2,OFF=11;
180 <SKIPCMD:LABEL=MC;
181 .TB2 <SKIPCMD:LABEL=TB3,OFF=12;
182 <SKIPCMD:LABEL=MC;
183 .TB3 <SKIPCMD:LABEL=TB4,OFF=13;
184 <SKIPCMD:LABEL=MC;
185 .TB4 <SKIPCMD:LABEL=TB5,OFF=14;
186 <SKIPCMD:LABEL=MC;
187 .TB5 <SKIPCMD:LABEL=OUT3;
188 /
189 .MC <STEP;
190 // **************************
191 // * DISPLAYING MO CONTENTS *
192 // **************************
193 /
194 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
195 <DISP FILE:VSN=AMAMOD;
196 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
197 /
198 <SKIPCMD:LABEL=OUT;
199 / *******************************
200 / * FAULT EXITS AND END MESSAGE *

MMN:SW-COFIP-74 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

REC77

201 / *******************************
202 /
203 .AB1 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
204 // ****************
205 // *** FAULT 01 ***
206 // ****************
207 // ************************************************************
208 // *** LABELING SAVING MO NOT EXECUTED. ***
209 // *** ***
210 // *** MOD STATION IS DEFECTIVE OR MO IS DAMAGED: ***
211 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
212 // *** ***
213 // *** START COMMAND FILE CG.SA.REC77 AGAIN. ***
214 // *** ***
215 // *** (IF ELIMINATING OF FAULTS NOT POSSIBLE, ) ***
216 // *** (ENTER: SETCFOPT:OFF=1&&4&6&&10,ON=5,SCOPE=GLOBAL; ) ***
217 // *** ***
218 // *** START COMMAND FILE CG.SA.REC77 AGAIN. ***
219 // ************************************************************
220 /
221 <RSET MO:VSN=AMAMOD;
222 /
223 <SETCFOPT:OFF=1&3&&10,ON=2,SCOPE=GLOBAL;
224 <SKIPCMD:LABEL=END;
225 /
226 .AB2 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
227 // ****************
228 // *** FAULT 02 ***
229 // ****************
230 // ************************************************************
231 // *** MO SAVING OF AMA FILE NOT EXECUTED. ***
232 // *** ***
233 // *** CASE 1: ***
234 // *** ======= ***
235 // *** MOD STATION IS DEFECTIVE OR MO IS DAMAGED: ***
236 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
237 // *** ***
238 // *** START COMMAND FILE CG.SA.REC77 AGAIN. ***
239 // *** ***
240 // *** (IF ELIMINATING OF FAULTS NOT POSSIBLE, ) ***
241 // *** (ENTER: SETCFOPT:OFF=1&&3&5&&10,ON=4,SCOPE=GLOBAL; ) ***
242 // *** ***
243 // *** START COMMAND FILE CG.SA.REC77 AGAIN. ***
244 // *** ***
245 // *** CASE 2: ***
246 // *** ======= ***
247 // *** ERROR: L FC 33. ***
248 // *** CORRESPONDING BACKGROUND MEMORY FILES ARE EMPTY. ***
249 // *** ***
250 // *** (ENTER: SETCFOPT:OFF=1&&3&5&&10,ON=4,SCOPE=GLOBAL; ) ***

A30808-X3080-C485-5-7620 MMN:SW-COFIP-75
MMN:SW Maintenance
Software

REC77

251 // *** ***

252 // *** START COMMAND FILE CG.SA.REC77 AGAIN. ***
253 // ************************************************************
254 /
255 <RSET MO:VSN=AMAMOD;
256 /
257 <SETCFOPT:OFF=1&2&4&&10,ON=3,SCOPE=GLOBAL;
258 <SKIPCMD:LABEL=END;
259 /
260 .AB3 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
261 // ****************
262 // *** FAULT 03 ***
263 // ****************
264 // ************************************************************
265 // *** MO SAVING OF IAR FILE NOT EXECUTED. ***
266 // *** ***
267 // *** CASE 1: ***
268 // *** ======= ***
269 // *** MOD STATION IS DEFECTIVE OR MO IS DAMAGED: ***
270 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
271 // *** ***
272 // *** START COMMAND FILE CG.SA.REC77 AGAIN. ***
273 // *** ***
274 // *** (IF ELIMINATING OF FAULTS NOT POSSIBLE, ) ***
275 // *** (ENTER: SETCFOPT:OFF=1&&5&7&&10,ON=6,SCOPE=GLOBAL; ) ***
276 // *** ***
277 // *** START COMMAND FILE CG.SA.REC77 AGAIN. ***
278 // *** ***
279 // *** CASE 2: ***
280 // *** ======= ***
281 // *** ERROR: L FC 33. ***
282 // *** CORRESPONDING BACKGROUND MEMORY FILES ARE EMPTY. ***
283 // *** ***
284 // *** (ENTER: SETCFOPT:OFF=1&&5&7&&10,ON=6,SCOPE=GLOBAL; ) ***
285 // *** ***
286 // *** START COMMAND FILE CG.SA.REC77 AGAIN. ***
287 // ************************************************************
288 /
289 <RSET MO:VSN=AMAMOD;
290 /
291 <SETCFOPT:OFF=1&&3&5&&10,ON=4,SCOPE=GLOBAL;
292 <SKIPCMD:LABEL=END;
293 /
294 .AB4 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
295 // ****************
296 // *** FAULT 04 ***
297 // ****************
298 // ************************************************************
299 // *** MO SAVING OF INA FILE NOT EXECUTED. ***
300 // *** ***

MMN:SW-COFIP-76 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

REC77

301 // *** CASE 1: ***

302 // *** ======= ***
303 // *** MOD STATION IS DEFECTIVE OR MO IS DAMAGED: ***
304 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
305 // *** ***
306 // *** START COMMAND FILE CG.SA.REC77 AGAIN. ***
307 // *** ***
308 // *** (IF ELIMINATING OF FAULTS NOT POSSIBLE, ) ***
309 // *** (ENTER: SETCFOPT:OFF=1&&6&8&&10,ON=7,SCOPE=GLOBAL; ) ***
310 // *** ***
311 // *** START COMMAND FILE CG.SA.REC77 AGAIN. ***
312 // *** ***
313 // *** CASE 2: ***
314 // *** ======= ***
315 // *** ERROR: L FC 33. ***
316 // *** CORRESPONDING BACKGROUND MEMORY FILES ARE EMPTY. ***
317 // *** ***
318 // *** (ENTER: SETCFOPT:OFF=1&&6&8&&10,ON=7,SCOPE=GLOBAL; ) ***
319 // *** ***
320 // *** START COMMAND FILE CG.SA.REC77 AGAIN. ***
321 // ************************************************************
322 /
323 <RSET MO:VSN=AMAMOD;
324 /
325 <SETCFOPT:OFF=1&&5&7&&10,ON=6,SCOPE=GLOBAL;
326 <SKIPCMD:LABEL=END;
327 /
328 .AB4 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
329 // ****************
330 // *** FAULT 05 ***
331 // ****************
332 // ************************************************************
333 // *** MO SAVING OF RIVSTAT FILE NOT EXECUTED. ***
334 // *** ***
335 // *** MOD STATION IS DEFECTIVE OR MO IS DAMAGED: ***
336 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
337 // *** ***
338 // *** START COMMAND FILE CG.SA.REC77 AGAIN. ***
339 // *** ***
340 // *** (IF ELIMINATING OF FAULTS NOT POSSIBLE, ) ***
341 // *** (ENTER: SETCFOPT:OFF=1&&7&9&&10,ON=8,SCOPE=GLOBAL; ) ***
342 // *** ***
343 // *** START COMMAND FILE CG.SA.REC77 AGAIN. ***
344 // ************************************************************
345 /
346 <RSET MO:VSN=AMAMOD;
347 /
348 <SETCFOPT:OFF=1&&6&8&&10,ON=7,SCOPE=GLOBAL;
349 <SKIPCMD:LABEL=END;
350 /

A30808-X3080-C485-5-7620 MMN:SW-COFIP-77
MMN:SW Maintenance
Software

REC77

351 .OUT <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;

352 // *******************************
353 // *** FINISHED WITHOUT FAULTS ***
354 // *******************************
355 // ***************************************************************
356 .OUT11 <SKIPCMD:LABEL=OUT12,OFF=11;
357 // *** AMA ACCOUNTING FILE WAS RESCUED FOR POSTPROCESSING ***
358 // *** ***
359 .OUT12 <SKIPCMD:LABEL=OUT13,OFF=12;
360 // *** IAR ACCOUNTING FILE WAS RESCUED FOR POSTPROCESSING ***
361 // *** ***
362 .OUT13 <SKIPCMD:LABEL=OUT14,OFF=13;
363 // *** INA ACCOUNTING FILE WAS RESCUED FOR POSTPROCESSING ***
364 // *** ***
365 .OUT14 <SKIPCMD:LABEL=OUT15,OFF=14;
366 // *** RIVSTAT ACCOUNTING FILE WAS RESCUED FOR POSTPROCESSING ***
367 // *** ***
368 .OUT15 <STEP;
369 // *** RELOAD MOD STATION. ***
370 // *** ***
371 // *** RESCUE OF BACKGROUND MEMORY DATA IS FINISHED. ***
372 // ***************************************************************
373 /
374 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
375 <SKIPCMD:LABEL=END;
376 /
377 .OUT1 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
378 // ****************************
379 // *** FINISHED WITH FAULTS ***
380 // ****************************
381 // *******************************************************
382 // *** MOD STATION IS DEFECTIVE. ***
383 // *** ***
384 // *** NO FILES WERE TRANSFERRED. ***
385 // *** ***
386 // *** RELOAD MOD STATION. ***
387 // *** ***
388 // *** RESCUE OF BACKGROUND MEMORY DATA IS FINISHED. ***
389 // *******************************************************
390 /
391 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
392 <SKIPCMD:LABEL=END;
393 /
394 .OUT2 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
395 // ****************************
396 // *** FINISHED WITH FAULTS ***
397 // ****************************
398 // *******************************************************
399 // *** NO FILES ARE AVAILABLE. ***
400 // *** ***

MMN:SW-COFIP-78 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

REC77

401 // *** RELOAD MOD STATION. ***

402 // *** ***
403 // *** RESCUE OF BACKGROUND MEMORY DATA IS FINISHED. ***
404 // *******************************************************
405 /
406 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
407 <SKIPCMD:LABEL=END;
408 /
409 .OUT3 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
410 // ****************************
411 // *** FINISHED WITH FAULTS ***
412 // ****************************
413 // *******************************************************
414 // *** NO FILES WERE TRANSFERRED. ***
415 // *** ***
416 // *** RELOAD MOD STATION. ***
417 // *** ***
418 // *** RESCUE OF BACKGROUND MEMORY DATA IS FINISHED. ***
419 // *******************************************************
420 /
421 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
422 <SKIPCMD:LABEL=END;
423 /
424 .END <SETCFOPT:ACKCFS=ERROR,DANCMD=NOEXEC,ACKREQ=NEG,SCOPE=GLOBAL;
425 <ENDFILE;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-79
MMN:SW Maintenance
Software

REC78

1 <CMDFILE;
2 /
3 // 80-REC78-01
4 /
5 /****V01***************************************************************
6 /* *
7 /* COMMAND FILE CG.SA.REC78 FOR RESCUE OF BACKGROUND MEMORY DATA *
8 /* ============================================================= *
9 /* *
10 /* TASK DESCRIPTION: *
11 /* ----------------- *
12 /* - SAVING RIVSTAT ACCOUNTING FILE ON TAPE *
13 /* *
14 /* HOLD TAPE READY/LOADING MAGNETIC TAPE DEVICE: *
15 /* --------------------------------------------- *
16 /* - A LARGE TAPE WITH WRITE RING IS TO BE HELD READY *
17 /* - BEFORE STARTING THE COMMAND FILE THE MAGNETIC TAPE *
18 /* DEVICE IS TO BE LOADED AND SWITCHED TO ONLINE *
19 /* *
20 /* FAULT HANDLING: *
21 /* --------------- *
22 /* - AFTER INTERRUPTION OF THE FILE PROCESSING VIA FAULT *
23 /* EXITS AND CORRESPONDING FAULT HANDLING THE FILE CAN *
24 /* BE STARTED AGAIN *
25 /* *
26 /* SWITCH PRESETTINGS FOR START POINTS AND ENTRY POINTS: *
27 /* ===================================================== *
28 /* START POINT SWITCH PRESETTINGS *
29 /* ----------- ------------------ *
30 /* RESETCFOPT; *
31 /* *
32 /* M2 SETCFOPT:OFF=1&3&&10,ON=2,SCOPE=GLOBAL; *
33 /* M3 SETCFOPT:OFF=1&2&4&&10,ON=3,SCOPE=GLOBAL; *
34 /* *
35 /* FAULT 01 *
36 /* ELEMINATED SETCFOPT:OFF=1&3&&10,ON=2,SCOPE=GLOBAL; *
37 /* FAULT 01 *
38 /* NOT ELEMINATED SETCFOPT:OFF=1&&3&5&&10,ON=4,SCOPE=GLOBAL; *
39 /* FAULT 02 *
40 /* ELEMINATED SETCFOPT:OFF=1&2&4&&10,ON=3,SCOPE=GLOBAL; *
41 /* FAULT 02 *
42 /* NOT ELEMINATED SETCFOPT:OFF=1&&3&5&&10,ON=4,SCOPE=GLOBAL; *
43 /* *
44 /**********************************************************************
45 /
46 <SETCFOPT:ACKCFS=ERROR,DANCMD=EXEC,ACKREQ=POS,SCOPE=GLOBAL;
47 /
48 <SKIPCMD:LABEL=END,ON=1;
49 <SKIPCMD:LABEL=M2,ON=2;
50 <SKIPCMD:LABEL=M3,ON=3;

MMN:SW-COFIP-80 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

REC78

51 <SKIPCMD:LABEL=OUT2,ON=4;
52 /
53 .M1 <STEP;
54 <DISP FILE:FILE=IR.;
55 <SKIPCMD:LABEL=M2,OFF=32;
56 <SKIPCMD:LABEL=OUT1;
57 /
58 .M2 <STEP;
59 // **********************************************
60 // * LABELING RIVSTAT ACCOUNTING FILE SAVE TAPE *
61 // **********************************************
62 /
63 <INIT MT:VSN=RIVTAP,MTD=00,CD=ISO,DENS=6250;
64 <SKIPCMD:LABEL=AB1,ON=32;
65 /
66 .M3 <STEP;
67 //
68 // **************************************************
69 // * TAPE SAVING OF RIVSTAT ACCOUNTING FILE STARTED *
70 // **************************************************
71 /
72 <TRANS FILE:VSNR=RIVTAP,COPMOD=POST,FILE=IR.;
73 <SKIPCMD:LABEL=AB2,ON=32;
74 /
75 .M4 <STEP;
76 //
77 // ************************************************
78 // * TAPE SAVING OF RIVSTAT ACCOUNTING FILE ENDED *
79 // ************************************************
80 /
81 <REWIND MT:VSN=RIVTAP;
82 /
83 .M5 <STEP;
84 //
85 // ****************************************************
86 // * DISPLAYING RIVSTAT ACCOUNTING FILE TAPE CONTENTS *
87 // ****************************************************
88 /
89 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
90 <DISP FILE:VSN=RIVTAP;
91 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
92 /
93 <SKIPCMD:LABEL=OUT;
94 / *******************************
95 / * FAULT EXITS AND END MESSAGE *
96 / *******************************
97 /
98 .AB1 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
99 // ****************
100 // *** FAULT 01 ***

A30808-X3080-C485-5-7620 MMN:SW-COFIP-81
MMN:SW Maintenance
Software

REC78

101 // ****************
102 // ***************************************************************
103 // *** LABELING RIVSTAT ACCOUNTINGFILE SAVE TAPE NOT EXECUTED. ***
104 // *** TAPE DEVICE OFFLINE OR DEFECTIVE OR TAPE DAMAGED: ***
105 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
106 // *** ***
107 // *** START COMMAND FILE CG.SA.REC78 AGAIN. ***
108 // *** ***
109 // *** (IF ELIMINATING OF FAULTS NOT POSSIBLE, ) ***
110 // *** (ENTER: SETCFOPT:OFF=1&&3&5&&10,ON=4,SCOPE=GLOBAL; ) ***
111 // *** ***
112 // *** START COMMAND FILE CG.SA.REC78 AGAIN. ***
113 // ***************************************************************
114 /
115 <REWIND MT:VSN=RIVTAP;
116 /
117 <SETCFOPT:OFF=1&3&&10,ON=2,SCOPE=GLOBAL;
118 <SKIPCMD:LABEL=END;
119 /
120 .AB2 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
121 // ****************
122 // *** FAULT 02 ***
123 // ****************
124 // ************************************************************
125 // *** TAPE SAVING OF RIVSTAT ACCOUNTING FILE NOT EXECUTED. ***
126 // *** ***
127 // *** CASE 1: ***
128 // *** ======= ***
129 // *** TAPE DEVICE OFFLINE OR DEFECTIVE OR TAPE DAMAGED: ***
130 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
131 // *** ***
132 // *** START COMMAND FILE CG.SA.REC78 AGAIN. ***
133 // *** ***
134 // *** (IF ELIMINATING OF FAULTS NOT POSSIBLE, ) ***
135 // *** (ENTER: SETCFOPT:OFF=1&&3&5&&10,ON=4,SCOPE=GLOBAL; ) ***
136 // *** ***
137 // *** START COMMAND FILE CG.SA.REC78 AGAIN. ***
138 // *** ***
139 // *** CASE 2: ***
140 // *** ======= ***
141 // *** ERROR: L FC 33. ***
142 // *** CORRESPONDING BACKGROUND MEMORY FILES ARE EMPTY. ***
143 // *** ***
144 // *** (ENTER: SETCFOPT:OFF=1&&3&5&&10,ON=4,SCOPE=GLOBAL; ) ***
145 // *** ***
146 // *** START COMMAND FILE CG.SA.REC78 AGAIN. ***
147 // ************************************************************
148 /
149 <REWIND MT:VSN=RIVTAP;
150 /

MMN:SW-COFIP-82 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

REC78

151 <SETCFOPT:OFF=1&2&4&&10,ON=3,SCOPE=GLOBAL;
152 <SKIPCMD:LABEL=END;
153 /
154 .OUT <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
155 /
156 // ******************************
157 // *** FINISHED THE PROCEDURE ***
158 // ******************************
159 // ******************************************************
160 // *** RELOAD MAGNETIC TAPE DEVICE. ***
161 // *** ***
162 // *** SAVING OF RIVSTAT ACCOUNTING FILE IS FINISHED. ***
163 // ******************************************************
164 /
165 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
166 <SKIPCMD:LABEL=END;
167 /
168 .OUT1 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
169 /
170 // ******************************
171 // *** FINISHED THE PROCEDURE ***
172 // ******************************
173 // ******************************************************
174 // *** RELOAD MAGNETIC TAPE DEVICE. ***
175 // *** ***
176 // *** NO RIVSTAT ACCOUNTING FILE FOR SAVING EXISTS. ***
177 // *** ***
178 // *** SAVING OF RIVSTAT ACCOUNTING FILE IS FINISHED. ***
179 // ******************************************************
180 /
181 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
182 <SKIPCMD:LABEL=END;
183 /
184 .OUT2 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
185 /
186 // ******************************
187 // *** FINISHED THE PROCEDURE ***
188 // ******************************
189 // ******************************************************
190 // *** RELOAD MAGNETIC TAPE DEVICE. ***
191 // *** ***
192 // *** NO RIVSTST ACCOUNTING FILE WAS TRANSFERRED. ***
193 // *** ***
194 // *** SAVING OF RIVSTAT ACCOUNTING FILE IS FINISHED. ***
195 // ******************************************************
196 /
197 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
198 <SKIPCMD:LABEL=END;
199 /
200 .END <SETCFOPT:ACKCFS=ERROR,DANCMD=NOEXEC,ACKREQ=NEG,SCOPE=GLOBAL;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-83
MMN:SW Maintenance
Software

REC78

201 <ENDFILE;

MMN:SW-COFIP-84 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

REC79

1 <CMDFILE;
2 /
3 // 80-REC79-01
4 /
5 /****V01***************************************************************
6 /* *
7 /* COMMAND FILE CG.SA.REC79 FOR RESCUE OF BACKGROUND MEMORY DATA *
8 /* ============================================================= *
9 /* *
10 /* TASK DESCRIPTION: *
11 /* ----------------- *
12 /* - SAVING INA ACCOUNTING FILE ON TAPE *
13 /* *
14 /* HOLD TAPE READY/LOADING MAGNETIC TAPE DEVICE: *
15 /* --------------------------------------------- *
16 /* - A LARGE TAPE WITH WRITE RING IS TO BE HELD READY *
17 /* - BEFORE STARTING THE COMMAND FILE THE MAGNETIC TAPE *
18 /* DEVICE IS TO BE LOADED AND SWITCHED TO ONLINE *
19 /* *
20 /* FAULT HANDLING: *
21 /* --------------- *
22 /* - AFTER INTERRUPTION OF THE FILE PROCESSING VIA FAULT *
23 /* EXITS AND CORRESPONDING FAULT HANDLING THE FILE CAN *
24 /* BE STARTED AGAIN *
25 /* *
26 /* SWITCH PRESETTINGS FOR START POINTS AND ENTRY POINTS: *
27 /* ===================================================== *
28 /* START POINT SWITCH PRESETTINGS *
29 /* ----------- ------------------ *
30 /* RESETCFOPT; *
31 /* *
32 /* M2 SETCFOPT:OFF=1&3&&10,ON=2,SCOPE=GLOBAL; *
33 /* M3 SETCFOPT:OFF=1&2&4&&10,ON=3,SCOPE=GLOBAL; *
34 /* *
35 /* FAULT 01 *
36 /* ELEMINATED SETCFOPT:OFF=1&3&&10,ON=2,SCOPE=GLOBAL; *
37 /* FAULT 01 *
38 /* NOT ELEMINATED SETCFOPT:OFF=1&&3&5&&10,ON=4,SCOPE=GLOBAL; *
39 /* FAULT 02 *
40 /* ELEMINATED SETCFOPT:OFF=1&2&4&&10,ON=3,SCOPE=GLOBAL; *
41 /* FAULT 02 *
42 /* NOT ELEMINATED SETCFOPT:OFF=1&&3&5&&10,ON=4,SCOPE=GLOBAL; *
43 /* *
44 /**********************************************************************
45 /
46 <SETCFOPT:ACKCFS=ERROR,DANCMD=EXEC,ACKREQ=POS,SCOPE=GLOBAL;
47 /
48 <SKIPCMD:LABEL=END,ON=1;
49 <SKIPCMD:LABEL=M2,ON=2;
50 <SKIPCMD:LABEL=M3,ON=3;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-85
MMN:SW Maintenance
Software

REC79

51 <SKIPCMD:LABEL=OUT2,ON=4;
52 /
53 .M1 <STEP;
54 <DISP FILE:FILE=IA.ICINA;
55 <SKIPCMD:LABEL=M2,OFF=32;
56 <SKIPCMD:LABEL=OUT1;
57 /
58 .M2 <STEP;
59 // ******************************************
60 // * LABELING INA ACCOUNTING FILE SAVE TAPE *
61 // ******************************************
62 /
63 <INIT MT:VSN=INATAP,MTD=00,CD=ISO,DENS=6250;
64 <SKIPCMD:LABEL=AB1,ON=32;
65 /
66 .M3 <STEP;
67 //
68 // **********************************************
69 // * TAPE SAVING OF INA ACCOUNTING FILE STARTED *
70 // **********************************************
71 /
72 <TRANS FILE:VSNR=INATAP,COPMOD=POST,FILE=IA.ICINA;
73 <SKIPCMD:LABEL=AB2,ON=32;
74 /
75 .M4 <STEP;
76 //
77 // ********************************************
78 // * TAPE SAVING OF INA ACCOUNTING FILE ENDED *
79 // ********************************************
80 /
81 <REWIND MT:VSN=INATAP;
82 /
83 .M5 <STEP;
84 //
85 // ************************************************
86 // * DISPLAYING INA ACCOUNTING FILE TAPE CONTENTS *
87 // ************************************************
88 /
89 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
90 <DISP FILE:VSN=INATAP;
91 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
92 /
93 <SKIPCMD:LABEL=OUT;
94 / *******************************
95 / * FAULT EXITS AND END MESSAGE *
96 / *******************************
97 /
98 .AB1 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
99 // ****************
100 // *** FAULT 01 ***

MMN:SW-COFIP-86 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

REC79

101 // ****************
102 // ************************************************************
103 // *** LABELING INA ACCOUNTINGFILE SAVE TAPE NOT EXECUTED. ***
104 // *** TAPE DEVICE OFFLINE OR DEFECTIVE OR TAPE DAMAGED: ***
105 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
106 // *** ***
107 // *** START COMMAND FILE CG.SA.REC79 AGAIN. ***
108 // *** ***
109 // *** (IF ELIMINATING OF FAULTS NOT POSSIBLE, ) ***
110 // *** (ENTER: SETCFOPT:OFF=1&&3&5&&10,ON=4,SCOPE=GLOBAL; ) ***
111 // *** ***
112 // *** START COMMAND FILE CG.SA.REC79 AGAIN. ***
113 // ************************************************************
114 /
115 <REWIND MT:VSN=INATAP;
116 /
117 <SETCFOPT:OFF=1&3&&10,ON=2,SCOPE=GLOBAL;
118 <SKIPCMD:LABEL=END;
119 /
120 .AB2 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
121 // ****************
122 // *** FAULT 02 ***
123 // ****************
124 // ************************************************************
125 // *** TAPE SAVING OF INA ACCOUNTING FILE NOT EXECUTED. ***
126 // *** ***
127 // *** CASE 1: ***
128 // *** ======= ***
129 // *** TAPE DEVICE OFFLINE OR DEFECTIVE OR TAPE DAMAGED: ***
130 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
131 // *** ***
132 // *** START COMMAND FILE CG.SA.REC79 AGAIN. ***
133 // *** ***
134 // *** (IF ELIMINATING OF FAULTS NOT POSSIBLE, ) ***
135 // *** (ENTER: SETCFOPT:OFF=1&&3&5&&10,ON=4,SCOPE=GLOBAL; ) ***
136 // *** ***
137 // *** START COMMAND FILE CG.SA.REC79 AGAIN. ***
138 // *** ***
139 // *** CASE 2: ***
140 // *** ======= ***
141 // *** ERROR: L FC 33. ***
142 // *** CORRESPONDING BACKGROUND MEMORY FILES ARE EMPTY. ***
143 // *** ***
144 // *** (ENTER: SETCFOPT:OFF=1&&3&5&&10,ON=4,SCOPE=GLOBAL; ) ***
145 // *** ***
146 // *** START COMMAND FILE CG.SA.REC79 AGAIN. ***
147 // ************************************************************
148 /
149 <REWIND MT:VSN=INATAP;
150 /

A30808-X3080-C485-5-7620 MMN:SW-COFIP-87
MMN:SW Maintenance
Software

REC79

151 <SETCFOPT:OFF=1&2&4&&10,ON=3,SCOPE=GLOBAL;
152 <SKIPCMD:LABEL=END;
153 /
154 .OUT <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
155 /
156 // ******************************
157 // *** FINISHED THE PROCEDURE ***
158 // ******************************
159 // **************************************************
160 // *** RELOAD MAGNETIC TAPE DEVICE. ***
161 // *** ***
162 // *** SAVING OF INA ACCOUNTING FILE IS FINISHED. ***
163 // **************************************************
164 /
165 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
166 <SKIPCMD:LABEL=END;
167 /
168 .OUT1 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
169 /
170 // ******************************
171 // *** FINISHED THE PROCEDURE ***
172 // ******************************
173 // **************************************************
174 // *** RELOAD MAGNETIC TAPE DEVICE. ***
175 // *** ***
176 // *** NO INA ACCOUNTING FILE FOR SAVING EXISTS. ***
177 // *** ***
178 // *** SAVING OF INA ACCOUNTING FILE IS FINISHED. ***
179 // **************************************************
180 /
181 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
182 <SKIPCMD:LABEL=END;
183 /
184 .OUT2 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
185 /
186 // ******************************
187 // *** FINISHED THE PROCEDURE ***
188 // ******************************
189 // **************************************************
190 // *** RELOAD MAGNETIC TAPE DEVICE. ***
191 // *** ***
192 // *** NO INA ACCOUNTING FILE WAS TRANSFERRED. ***
193 // *** ***
194 // *** SAVING OF INA ACCOUNTING FILE IS FINISHED. ***
195 // **************************************************
196 /
197 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
198 <SKIPCMD:LABEL=END;
199 /
200 .END <SETCFOPT:ACKCFS=ERROR,DANCMD=NOEXEC,ACKREQ=NEG,SCOPE=GLOBAL;

MMN:SW-COFIP-88 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

REC79

201 <ENDFILE;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-89
MMN:SW Maintenance
Software

REC91

1 <CMDFILE;
2 /
3 // 80-REC91-01
4 /
5 /****V01***************************************************************
6 /* *
7 /* COMMAND FILE CG.SA.REC91 FOR RECOVERY FROM FALL BACK GENERATION *
8 /* =============================================================== *
9 /* *
10 /* TASK DESCRIPTION: *
11 /* ----------------- *
12 /* - POSTPROCESSING AND TEST AFTER RECOVERY FROM FALL BACK *
13 /* GENERATION *
14 /* *
15 /* SWITCH PRESETTINGS FOR START POINTS AND ENTRY POINTS: *
16 /* ===================================================== *
17 /* START POINT SWITCH PRESETTINGS *
18 /* ----------- ------------------ *
19 /* RESETCFOPT; *
20 /* *
21 /**********************************************************************
22 /
23 <SETCFOPT:ACKCFS=ERROR,DANCMD=EXEC,ACKREQ=POS,SCOPE=GLOBAL;
24 /
25 <SKIPCMD:LABEL=END,ON=1;
26 /
27 .M1 <STEP;
28 //
29 // *******************************
30 // * DISPLAYING LOG FILE ENTRIES *
31 // *******************************
32 /
33 <DISP FILE:FILE=LG.;
34 <SKIPCMD:LABEL=T1,ON=32;
35 <SKIPCMD:LABEL=M2;
36 /
37 .T1 <SKIPCMD:LABEL=OUT1;
38 /
39 .M2 <STEP;
40 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
41 <STAT LOG;
42 <DISP FILE:FILE=LG.;
43 <DISP FILE:FILE=LQ.;
44 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
45 /
46 //
47 // *************************
48 // * REGENERATING LOG DATA *
49 // *************************
50 /

MMN:SW-COFIP-90 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

REC91

51 <DACT FNS:FNS=LG;
52 /
53 <DISP FILE:FILE=LQ.;
54 <SKIPCMD:LABEL=T21,ON=32;
55 /
56 <DACT FNS:FNS=LQ;
57 /
58 .T21 <DISP FILE:FILE=LG.LOG6.;
59 <SKIPCMD:LABEL=T22,ON=32;
60 /
61 <MOD FILEAUT:FILE=LG.LOG6.A0,AR=NOAR;
62 <MOD FILEAUT:FILE=LG.LOG6.A1,AR=NOAR;
63 /
64 <DISP FILE:FILE=LG.LOG6.A2;
65 <SKIPCMD:LABEL=T211,ON=32;
66 <MOD FILEAUT:FILE=LG.LOG6.A2,AR=NOAR;
67 /
68 <DISP FILE:FILE=LG.LOG6.A3;
69 <SKIPCMD:LABEL=T211,ON=32;
70 <MOD FILEAUT:FILE=LG.LOG6.A3,AR=NOAR;
71 /
72 .T211 <TRANS FILE:FILE=LG.TMP.LOG6./LG.LOG6.;
73 <DEL FILE:FILE=LG.LOG6.;
74 /
75 <DISP FILE:FILE=LQ.LOG6.A1;
76 <SKIPCMD:LABEL=T213,ON=32;
77 /
78 <MOD FILEAUT:FILE=LQ.LOG6.A1,AR=NOAR;
79 /
80 <DISP FILE:FILE=LQ.LOG6.A2;
81 <SKIPCMD:LABEL=T212,ON=32;
82 <MOD FILEAUT:FILE=LQ.LOG6.A2,AR=NOAR;
83 /
84 <DISP FILE:FILE=LQ.LOG6.A3;
85 <SKIPCMD:LABEL=T212,ON=32;
86 <MOD FILEAUT:FILE=LQ.LOG6.A3,AR=NOAR;
87 /
88 .T212 <TRANS FILE:FILE=LQ.TMP.LOG6./LQ.LOG6.;
89 <DEL FILE:FILE=LQ.LOG6.;
90 /
91 .T213 <SET LOG:FILE=LOG6,SIZE=24,ERASE=YES;
92 /
93 <EXEC CMDFILE:FILE=LG.TMP.LOG6.A1;
94 <DISP FILE:FILE=LG.TMP.LOG6.A2;
95 <SKIPCMD:LABEL=T214,ON=32;
96 <EXEC CMDFILE:FILE=LG.TMP.LOG6.A2;
97 <DISP FILE:FILE=LG.TMP.LOG6.A3;
98 <SKIPCMD:LABEL=T214,ON=32;
99 <EXEC CMDFILE:FILE=LG.TMP.LOG6.A3;
100 /

A30808-X3080-C485-5-7620 MMN:SW-COFIP-91
MMN:SW Maintenance
Software

REC91

101 .T214 <SKIPCMD:LABEL=T27;

102 /
103 .T22 <DISP FILE:FILE=LG.LOG5.;
104 <SKIPCMD:LABEL=T23,ON=32;
105 /
106 <MOD FILEAUT:FILE=LG.LOG5.A0,AR=NOAR;
107 <MOD FILEAUT:FILE=LG.LOG5.A1,AR=NOAR;
108 /
109 <DISP FILE:FILE=LG.LOG5.A2;
110 <SKIPCMD:LABEL=T221,ON=32;
111 <MOD FILEAUT:FILE=LG.LOG5.A2,AR=NOAR;
112 /
113 <DISP FILE:FILE=LG.LOG5.A3;
114 <SKIPCMD:LABEL=T221,ON=32;
115 <MOD FILEAUT:FILE=LG.LOG5.A3,AR=NOAR;
116 /
117 .T221 <TRANS FILE:FILE=LG.TMP.LOG5./LG.LOG5.;
118 <DEL FILE:FILE=LG.LOG5.;
119 /
120 <DISP FILE:FILE=LQ.LOG5.A1;
121 <SKIPCMD:LABEL=T223,ON=32;
122 /
123 <MOD FILEAUT:FILE=LQ.LOG5.A1,AR=NOAR;
124 /
125 <DISP FILE:FILE=LQ.LOG5.A2;
126 <SKIPCMD:LABEL=T222,ON=32;
127 <MOD FILEAUT:FILE=LQ.LOG5.A2,AR=NOAR;
128 /
129 <DISP FILE:FILE=LQ.LOG5.A3;
130 <SKIPCMD:LABEL=T222,ON=32;
131 <MOD FILEAUT:FILE=LQ.LOG5.A3,AR=NOAR;
132 /
133 .T222 <TRANS FILE:FILE=LQ.TMP.LOG5./LQ.LOG5.;
134 <DEL FILE:FILE=LQ.LOG5.;
135 /
136 .T223 <SET LOG:FILE=LOG6,SIZE=24,ERASE=YES;
137 /
138 <EXEC CMDFILE:FILE=LG.TMP.LOG5.A1;
139 <DISP FILE:FILE=LG.TMP.LOG5.A2;
140 <SKIPCMD:LABEL=T224,ON=32;
141 <EXEC CMDFILE:FILE=LG.TMP.LOG5.A2;
142 <DISP FILE:FILE=LG.TMP.LOG5.A3;
143 <SKIPCMD:LABEL=T224,ON=32;
144 <EXEC CMDFILE:FILE=LG.TMP.LOG5.A3;
145 /
146 .T224 <SKIPCMD:LABEL=T27;
147 /
148 .T23 <DISP FILE:FILE=LG.LOG4.;
149 <SKIPCMD:LABEL=T24,ON=32;
150 /

MMN:SW-COFIP-92 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

REC91

151 <MOD FILEAUT:FILE=LG.LOG4.A0,AR=NOAR;

152 <MOD FILEAUT:FILE=LG.LOG4.A1,AR=NOAR;
153 /
154 <DISP FILE:FILE=LG.LOG4.A2;
155 <SKIPCMD:LABEL=T231,ON=32;
156 <MOD FILEAUT:FILE=LG.LOG4.A2,AR=NOAR;
157 /
158 <DISP FILE:FILE=LG.LOG4.A3;
159 <SKIPCMD:LABEL=T231,ON=32;
160 <MOD FILEAUT:FILE=LG.LOG4.A3,AR=NOAR;
161 /
162 .T231 <TRANS FILE:FILE=LG.TMP.LOG4./LG.LOG4.;
163 <DEL FILE:FILE=LG.LOG4.;
164 /
165 <DISP FILE:FILE=LQ.LOG4.A1;
166 <SKIPCMD:LABEL=T233,ON=32;
167 /
168 <MOD FILEAUT:FILE=LQ.LOG4.A1,AR=NOAR;
169 /
170 <DISP FILE:FILE=LQ.LOG4.A2;
171 <SKIPCMD:LABEL=T232,ON=32;
172 <MOD FILEAUT:FILE=LQ.LOG4.A2,AR=NOAR;
173 /
174 <DISP FILE:FILE=LQ.LOG4.A3;
175 <SKIPCMD:LABEL=T232,ON=32;
176 <MOD FILEAUT:FILE=LQ.LOG4.A3,AR=NOAR;
177 /
178 .T232 <TRANS FILE:FILE=LQ.TMP.LOG4./LQ.LOG4.;
179 <DEL FILE:FILE=LQ.LOG4.;
180 /
181 .T233 <SET LOG:FILE=LOG6,SIZE=24,ERASE=YES;
182 /
183 <EXEC CMDFILE:FILE=LG.TMP.LOG4.A1;
184 <DISP FILE:FILE=LG.TMP.LOG4.A2;
185 <SKIPCMD:LABEL=T234,ON=32;
186 <EXEC CMDFILE:FILE=LG.TMP.LOG4.A2;
187 <DISP FILE:FILE=LG.TMP.LOG4.A3;
188 <SKIPCMD:LABEL=T234,ON=32;
189 <EXEC CMDFILE:FILE=LG.TMP.LOG4.A3;
190 /
191 .T234 <SKIPCMD:LABEL=T27;
192 /
193 .T24 <DISP FILE:FILE=LG.LOG3.;
194 <SKIPCMD:LABEL=T25,ON=32;
195 /
196 <MOD FILEAUT:FILE=LG.LOG3.A0,AR=NOAR;
197 <MOD FILEAUT:FILE=LG.LOG3.A1,AR=NOAR;
198 /
199 <DISP FILE:FILE=LG.LOG3.A2;
200 <SKIPCMD:LABEL=T241,ON=32;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-93
MMN:SW Maintenance
Software

REC91

201 <MOD FILEAUT:FILE=LG.LOG3.A2,AR=NOAR;

202 /
203 <DISP FILE:FILE=LG.LOG3.A3;
204 <SKIPCMD:LABEL=T241,ON=32;
205 <MOD FILEAUT:FILE=LG.LOG3.A3,AR=NOAR;
206 /
207 .T241 <TRANS FILE:FILE=LG.TMP.LOG3./LG.LOG3.;
208 <DEL FILE:FILE=LG.LOG3.;
209 /
210 <DISP FILE:FILE=LQ.LOG3.A1;
211 <SKIPCMD:LABEL=T243,ON=32;
212 /
213 <MOD FILEAUT:FILE=LQ.LOG3.A1,AR=NOAR;
214 /
215 <DISP FILE:FILE=LQ.LOG3.A2;
216 <SKIPCMD:LABEL=T242,ON=32;
217 <MOD FILEAUT:FILE=LQ.LOG3.A2,AR=NOAR;
218 /
219 <DISP FILE:FILE=LQ.LOG3.A3;
220 <SKIPCMD:LABEL=T242,ON=32;
221 <MOD FILEAUT:FILE=LQ.LOG3.A3,AR=NOAR;
222 /
223 .T242 <TRANS FILE:FILE=LQ.TMP.LOG3./LQ.LOG3.;
224 <DEL FILE:FILE=LQ.LOG3.;
225 /
226 .T243 <SET LOG:FILE=LOG6,SIZE=24,ERASE=YES;
227 /
228 <EXEC CMDFILE:FILE=LG.TMP.LOG3.A1;
229 <DISP FILE:FILE=LG.TMP.LOG3.A2;
230 <SKIPCMD:LABEL=T244,ON=32;
231 <EXEC CMDFILE:FILE=LG.TMP.LOG3.A2;
232 <DISP FILE:FILE=LG.TMP.LOG3.A3;
233 <SKIPCMD:LABEL=T244,ON=32;
234 <EXEC CMDFILE:FILE=LG.TMP.LOG3.A3;
235 /
236 .T244 <SKIPCMD:LABEL=T27;
237 /
238 .T25 <DISP FILE:FILE=LG.LOG2.;
239 <SKIPCMD:LABEL=T26,ON=32;
240 /
241 <MOD FILEAUT:FILE=LG.LOG2.A0,AR=NOAR;
242 <MOD FILEAUT:FILE=LG.LOG2.A1,AR=NOAR;
243 /
244 <DISP FILE:FILE=LG.LOG2.A2;
245 <SKIPCMD:LABEL=T251,ON=32;
246 <MOD FILEAUT:FILE=LG.LOG2.A2,AR=NOAR;
247 /
248 <DISP FILE:FILE=LG.LOG2.A3;
249 <SKIPCMD:LABEL=T251,ON=32;
250 <MOD FILEAUT:FILE=LG.LOG2.A3,AR=NOAR;

MMN:SW-COFIP-94 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

REC91

251 /
252 .T251 <TRANS FILE:FILE=LG.TMP.LOG2./LG.LOG2.;
253 <DEL FILE:FILE=LG.LOG2.;
254 /
255 <DISP FILE:FILE=LQ.LOG2.A1;
256 <SKIPCMD:LABEL=T253,ON=32;
257 /
258 <MOD FILEAUT:FILE=LQ.LOG2.A1,AR=NOAR;
259 /
260 <DISP FILE:FILE=LQ.LOG2.A2;
261 <SKIPCMD:LABEL=T252,ON=32;
262 <MOD FILEAUT:FILE=LQ.LOG2.A2,AR=NOAR;
263 /
264 <DISP FILE:FILE=LQ.LOG2.A3;
265 <SKIPCMD:LABEL=T252,ON=32;
266 <MOD FILEAUT:FILE=LQ.LOG2.A3,AR=NOAR;
267 /
268 .T252 <TRANS FILE:FILE=LQ.TMP.LOG2./LQ.LOG2.;
269 <DEL FILE:FILE=LQ.LOG2.;
270 /
271 .T253 <SET LOG:FILE=LOG6,SIZE=24,ERASE=YES;
272 /
273 <EXEC CMDFILE:FILE=LG.TMP.LOG2.A1;
274 <DISP FILE:FILE=LG.TMP.LOG2.A2;
275 <SKIPCMD:LABEL=T254,ON=32;
276 <EXEC CMDFILE:FILE=LG.TMP.LOG2.A2;
277 <DISP FILE:FILE=LG.TMP.LOG2.A3;
278 <SKIPCMD:LABEL=T254,ON=32;
279 <EXEC CMDFILE:FILE=LG.TMP.LOG2.A3;
280 /
281 .T254 <SKIPCMD:LABEL=T27;
282 /
283 .T26 <MOD FILEAUT:FILE=LG.LOG1.A0,AR=NOAR;
284 <MOD FILEAUT:FILE=LG.LOG1.A1,AR=NOAR;
285 /
286 <DISP FILE:FILE=LG.LOG1.A2;
287 <SKIPCMD:LABEL=T261,ON=32;
288 <MOD FILEAUT:FILE=LG.LOG1.A2,AR=NOAR;
289 /
290 <DISP FILE:FILE=LG.LOG1.A3;
291 <SKIPCMD:LABEL=T261,ON=32;
292 <MOD FILEAUT:FILE=LG.LOG1.A3,AR=NOAR;
293 /
294 .T261 <TRANS FILE:FILE=LG.TMP.LOG1./LG.LOG1.;
295 <DEL FILE:FILE=LG.LOG1.;
296 /
297 <DISP FILE:FILE=LQ.LOG1.A1;
298 <SKIPCMD:LABEL=T263,ON=32;
299 /
300 <MOD FILEAUT:FILE=LQ.LOG1.A1,AR=NOAR;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-95
MMN:SW Maintenance
Software

REC91

301 /
302 <DISP FILE:FILE=LQ.LOG1.A2;
303 <SKIPCMD:LABEL=T262,ON=32;
304 <MOD FILEAUT:FILE=LQ.LOG1.A2,AR=NOAR;
305 /
306 <DISP FILE:FILE=LQ.LOG1.A3;
307 <SKIPCMD:LABEL=T262,ON=32;
308 <MOD FILEAUT:FILE=LQ.LOG1.A3,AR=NOAR;
309 /
310 .T262 <TRANS FILE:FILE=LQ.TMP.LOG1./LQ.LOG1.;
311 <DEL FILE:FILE=LQ.LOG1.;
312 /
313 .T263 <SET LOG:FILE=LOG6,SIZE=24,ERASE=YES;
314 /
315 <EXEC CMDFILE:FILE=LG.TMP.LOG1.A1;
316 <DISP FILE:FILE=LG.TMP.LOG1.A2;
317 <SKIPCMD:LABEL=T27,ON=32;
318 <EXEC CMDFILE:FILE=LG.TMP.LOG1.A2;
319 <DISP FILE:FILE=LG.TMP.LOG1.A3;
320 <SKIPCMD:LABEL=T27,ON=32;
321 <EXEC CMDFILE:FILE=LG.TMP.LOG1.A3;
322 /
323 .T27 <ACT FNS:FNS=LG;
324 <DEL FILE:FILE=LG.TMP.;
325 /
326 <DISP FILE:FILE=LQ.;
327 <SKIPCMD:LABEL=M3,ON=32;
328 /
329 <ACT FNS:FNS=LQ;
330 <DEL FILE:FILE=LQ.TMP.;
331 /
332 .M3 <STEP;
333 //
334 // *******************************
335 // * DISPLAYING LOG FILE ENTRIES *
336 // *******************************
337 /
338 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
339 <DISP FILE:FILE=LG.;
340 <DISP FILE:FILE=LQ.;
341 <STAT LOG;
342 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
343 /
344 <SKIPCMD:LABEL=OUT;
345 / ***************
346 / * END MESSAGE *
347 / ***************
348 /
349 .OUT <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
350 /

MMN:SW-COFIP-96 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

REC91

351 // *******************************
352 // *** FINISHED WITHOUT FAULTS ***
353 // *******************************
354 // *****************************************
355 // *** LOG FILE POSTPROCESSING FINISHED. ***
356 // *** ***
357 // *** CONTINUE WITH PROCEDURE. ***
358 // *****************************************
359 /
360 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
361 <SKIPCMD:LABEL=END;
362 /
363 .OUT1 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
364 /
365 // ****************************
366 // *** FINISHED WITH FAULTS ***
367 // ****************************
368 // ********************************************
369 // *** NO LOG FILE ON DISK EXISTS. ***
370 // *** TYPE IN MANUALLY: ***
371 // *** ================= ***
372 // *** ACTLOG:FILE=LOG6,SIZE=24,ERASE=YES; ***
373 // *** ***
374 // *** CONTINUE WITH PROCEDURE. ***
375 // ********************************************
376 /
377 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
378 <SKIPCMD:LABEL=END;
379 /
380 .END <SETCFOPT:ACKCFS=ERROR,DANCMD=NOEXEC,ACKREQ=NEG,SCOPE=GLOBAL;
381 <ENDFILE;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-97
MMN:SW Maintenance
Software

REC92

1 <CMDFILE;
2 /
3 // 80-REC92-01
4 /
5 /****V01***************************************************************
6 /* *
7 /* COMMAND FILE CG.SA.REC92 FOR RECOVERY FROM FALL BACK GENERATION *
8 /* =============================================================== *
9 /* *
10 /* TASK DESCRIPTION: *
11 /* ----------------- *
12 /* - POSTPROCESSING AND TEST AFTER RECOVERY FROM FALL BACK *
13 /* GENERATION *
14 /* *
15 /* SWITCH PRESETTINGS FOR START POINTS AND ENTRY POINTS: *
16 /* ===================================================== *
17 /* START POINT SWITCH PRESETTINGS *
18 /* ----------- ------------------ *
19 /* RESETCFOPT; *
20 /* *
21 /**********************************************************************
22 /
23 <SETCFOPT:ACKCFS=ERROR,DANCMD=EXEC,ACKREQ=POS,SCOPE=GLOBAL;
24 /
25 <SKIPCMD:LABEL=END,ON=1;
26 /
27 .M1 <STEP;
28 //
29 // **********************************
30 // * INTERROGATION OF CONFIGURATION *
31 // **********************************
32 /
33 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
34 <STAT SN;
35 <STAT MB;
36 <STAT CCG;
37 <STAT SYP;
38 <STAT LTG:LTG=X-X;
39 <STAT DLU:DLU=X;
40 /
41 <STAT SSP;
42 /
43 <DISP TSG:SN=X;
44 /
45 <STAT DIU:LTG=X-X,OST=UNA;
46 <STAT CR:LTG=X-X,OST=UNA;
47 /
48 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
49 <DISP MUX;
50 <SKIPCMD:LABEL=M2,ON=32;

MMN:SW-COFIP-98 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

REC92

51 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
52 <STAT CCNC:UNIT=CCNP-X;
53 <STAT CCNC:UNIT=MUXM-X;
54 <DISP C7LINK:LINKNO=X;
55 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
56 /
57 .M2 <STEP;
58 //
59 // ******************************
60 // * DISPLAYING CATALOG ENTRIES *
61 // ******************************
62 /
63 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
64 <DISP FILE;
65 <DISP MD;
66 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
67 /
68 <SKIPCMD:LABEL=OUT;
69 / ***************
70 / * END MESSAGE *
71 / ***************
72 /
73 .OUT <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
74 /
75 // *******************************
76 // *** FINISHED WITHOUT FAULTS ***
77 // *******************************
78 // ******************************************************
79 // *** IF THE DESIRED CONFIGURATION WAS NOT ACHIEVED, ***
80 // *** FAULT CLEARANCE MUST BE PERFORMED AFTER ***
81 // *** TERMINATION OF THE PROCEDURE. ***
82 // *** ***
83 // *** CONTINUE WITH PROCEDURE. ***
84 // ******************************************************
85 /
86 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
87 /
88 .END <SETCFOPT:ACKCFS=ERROR,DANCMD=NOEXEC,ACKREQ=NEG,SCOPE=GLOBAL;
89 <ENDFILE;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-99
MMN:SW Maintenance
Software

M11AP

1 <CMDFILE;
2 /
3 // 80-M11AP-05
4 /
5 /****V05***************************************************************
6 /* *
7 /* COMMAND FILE CG.SA.M11AP FOR METER ROUTINE SAVING ON TAPE *
8 /* ========================================================= *
9 /* *
10 /* TASK DESCRIPTION: *
11 /* ----------------- *
12 /* - SAVING LOGICAL METER FILES ON DISK *
13 /* - SAVING LOGICAL METER FILES ON TAPE *
14 /* *
15 /* PURPOSE OF THE TAPE REGENERATION BACKUP FILES: *
16 /* ---------------------------------------------- *
17 /* - REGENERATION OF METERS AFTER DETECTION OF *
18 /* IRREPARABLE COMPARATOR FAULTS BY THE TEST AND *
19 /* SAVE ROUTINES *
20 /* - MAKING THE METER VALUES OF THE LAST *
21 /* ROUTINE SAVE AVAILABLE FOR USE IN PROCEDURES *
22 /* EY150 AND EY190 *
23 /* *
24 /* HOLD TAPE READY/LOADING MAGNETIC TAPE DEVICE: *
25 /* --------------------------------------------- *
26 /* - A LARGE TAPE WITH WRITE RING IS TO BE HELD READY *
27 /* - BEFORE STARTING THE COMMAND FILE THE MAGNETIC TAPE *
28 /* DEVICE IS TO BE LOADED AND SWITCHED TO ONLINE *
29 /* *
30 /* *
31 /* FAULT HANDLING: *
32 /* --------------- *
33 /* - AFTER INTERRUPTION OF THE FILE PROCESSING VIA FAULT *
34 /* EXITS AND CORRESPONDING FAULT HANDLING THE FILE CAN *
35 /* BE STARTED AGAIN *
36 /* *
37 /* SWITCH PRESETTINGS FOR START POINTS AND ENTRY POINTS: *
38 /* ===================================================== *
39 /* START POINT SWITCH PRESETTINGS *
40 /* ----------- ------------------ *
41 /* RESETCFOPT; *
42 /* *
43 /* ENTRY POINT SWITCH PRESETTINGS *
44 /* ----------- ------------------ *
45 /* M2 SETCFOPT:OFF=1&2&4&&9,ON=3,SCOPE=GLOBAL; *
46 /* M3 SETCFOPT:OFF=1&&3&5&&9,ON=4,SCOPE,=GLOBAL; *
47 /* T36 SETCFOPT:OFF=1&&4&6&&9,ON=5,SCOPE=GLOBAL; *
48 /* M4 SETCFOPT:OFF=1&&5&7&&9,ON=6,SCOPE=GLOBAL; *
49 /* *
50 /* FAULT 02 SETCFOPT:OFF=1&2&4&&9,ON=3,SCOPE=GLOBAL; *

MMN:SW-COFIP-100 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

M11AP

51 /* FAULT 03 SETCFOPT:OFF=1&&3&5&&9,ON=4,SCOPE=GLOBAL; *
52 /* FAULT 04 SETCFOPT:OFF=1&&4&6&&9,ON=5,SCOPE=GLOBAL; *
53 /* FAULT 05 SETCFOPT:OFF=1&&5&7&&9,ON=6,SCOPE=GLOBAL; *
54 /* *
55 /**********************************************************************
56 /
57 <SETCFOPT:ACKCFS=ERROR,DANCMD=EXEC,ACKREQ=POS,SCOPE=GLOBAL;
58 /
59 <SKIPCMD:LABEL=END,ON=1;
60 <SKIPCMD:LABEL=M2,ON=3;
61 <SKIPCMD:LABEL=M3,ON=4;
62 <SKIPCMD:LABEL=T36,ON=5;
63 <SKIPCMD:LABEL=M4,ON=6;
64 /
65 <SKIPCMD:LABEL=M2;
66 /
67 .M2 <STEP;
68 //
69 // **********************************************
70 // * PREPARATION FOR TAPE SAVING OF METER FILES *
71 // **********************************************
72 //
73 <REWIND MT:VSN=LOGTAP;
74 <DISP FILE:FILE=DUMMY.MET;
75 <SKIPCMD:LABEL=T22,OFF=32;
76 /
77 .T21 <CR FILE:FILE=DUMMY.MET,SIZE=24,TYPE=DOUBLE;
78 <SKIPCMD:LABEL=T22;
79 /
80 .T22 <DISP FILE:FILE=DUMMY.MET,VSN=LOGTAP;
81 <SKIPCMD:LABEL=T24,ON=32;
82 /
83 .T23 <DEL FILE:FILE=DUMMY.MET,VSN=LOGTAP;
84 /
85 .T24 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=DUMMY.MET;
86 <SKIPCMD:LABEL=AB2,ON=32;
87 /
88 .M3 <STEP;
89 //
90 // *************************
91 // * DISK SAVING OF METERS *
92 // *************************
93 //
94 /
95 .T30 <DACT FNS:FNS=CA;
96 /
97 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
98 /
99 .T31 <DISP FILE:FILE=CA.SU.UCHA;
100 <SKIPCMD:LABEL=T32,ON=32;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-101
MMN:SW Maintenance
Software

M11AP

101 <DISP FILE:FILE=OLD.CA.SU.UCHA;

102 <SKIPCMD:LABEL=T311,ON=32;
103 <DEL FILE:FILE=OLD.CA.SU.UCHA;
104 .T311 <DISP FILE:FILE=TCA.CA.SU.UCHA;
105 <SKIPCMD:LABEL=T312,ON=32;
106 <CAT FILE:FILE=OLD.CA.SU.UCHA/TCA.CA.SU.UCHA;
107 /
108 .T312 <SAVE MET:TYPE=METSUB;
109 <SKIPCMD:LABEL=T32,OFF=32;
110 <DISP FILE:FILE=OLD.CA.SU.UCHA;
111 <SKIPCMD:LABEL=T313,ON=32;
112 <SAVE MET:TYPE=METSUB,REFILE=OLD.CA.SU.UCHA;
113 <SKIPCMD:LABEL=AB3,ON=32;
114 <SKIPCMD:LABEL=T32;
115 .T313 <SAVE MET:TYPE=METSUB,ZEROIN=YES;
116 <SKIPCMD:LABEL=AB3,ON=32;
117 /
118 .T32 <DISP FILE:FILE=CA.TR.UCHA;
119 <SKIPCMD:LABEL=T33,ON=32;
120 <DISP FILE:FILE=OLD.CA.TR.UCHA;
121 <SKIPCMD:LABEL=T321,ON=32;
122 <DEL FILE:FILE=OLD.CA.TR.UCHA;
123 .T321 <DISP FILE:FILE=TCA.CA.TR.UCHA;
124 <SKIPCMD:LABEL=T322,ON=32;
125 <CAT FILE:FILE=OLD.CA.TR.UCHA/TCA.CA.TR.UCHA;
126 /
127 .T322 <SAVE MET:TYPE=METTR;
128 <SKIPCMD:LABEL=T33,OFF=32;
129 <DISP FILE:FILE=OLD.CA.TR.UCHA;
130 <SKIPCMD:LABEL=T323,ON=32;
131 <SAVE MET:TYPE=METTR,REFILE=OLD.CA.TR.UCHA;
132 <SKIPCMD:LABEL=AB3,ON=32;
133 <SKIPCMD:LABEL=T33;
134 .T323 <SAVE MET:TYPE=METTR,ZEROIN=YES;
135 <SKIPCMD:LABEL=AB3,ON=32;
136 /
137 .T33 <DISP FILE:FILE=CA.ST.UCHA;
138 <SKIPCMD:LABEL=T34,ON=32;
139 <DISP FILE:FILE=OLD.CA.ST.UCHA;
140 <SKIPCMD:LABEL=T331,ON=32;
141 <DEL FILE:FILE=OLD.CA.ST.UCHA;
142 .T331 <DISP FILE:FILE=TCA.CA.ST.UCHA;
143 <SKIPCMD:LABEL=T332,ON=32;
144 <CAT FILE:FILE=OLD.CA.ST.UCHA/TCA.CA.ST.UCHA;
145 /
146 .T332 <SAVE MET:TYPE=METSTAT;
147 <SKIPCMD:LABEL=T34,OFF=32;
148 <DISP FILE:FILE=OLD.CA.ST.UCHA;
149 <SKIPCMD:LABEL=T333,ON=32;
150 <SAVE MET:TYPE=METSTAT,REFILE=OLD.CA.ST.UCHA;

MMN:SW-COFIP-102 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

M11AP

151 <SKIPCMD:LABEL=AB3,ON=32;
152 <SKIPCMD:LABEL=T34;
153 .T333 <SAVE MET:TYPE=METSTAT,ZEROIN=YES;
154 <SKIPCMD:LABEL=AB3,ON=32;
155 /
156 .T34 <DISP FILE:FILE=CA.TF.UCHA;
157 <SKIPCMD:LABEL=T35,ON=32;
158 <DISP FILE:FILE=OLD.CA.TF.UCHA;
159 <SKIPCMD:LABEL=T341,ON=32;
160 <DEL FILE:FILE=OLD.CA.TF.UCHA;
161 .T341 <DISP FILE:FILE=TCA.CA.TF.UCHA;
162 <SKIPCMD:LABEL=T342,ON=32;
163 <CAT FILE:FILE=OLD.CA.TF.UCHA/TCA.CA.TF.UCHA;
164 /
165 .T342 <SAVE MET:TYPE=METTFS;
166 <SKIPCMD:LABEL=T35,OFF=32;
167 <DISP FILE:FILE=OLD.CA.TF.UCHA;
168 <SKIPCMD:LABEL=T343,ON=32;
169 <SAVE MET:TYPE=METTFS,REFILE=OLD.CA.TF.UCHA;
170 <SKIPCMD:LABEL=AB3,ON=32;
171 <SKIPCMD:LABEL=T35;
172 .T343 <SAVE MET:TYPE=METTFS,ZEROIN=YES;
173 <SKIPCMD:LABEL=AB3,ON=32;
174 /
175 .T35 <DISP FILE:FILE=CA.IC.UCHA;
176 <SKIPCMD:LABEL=T36,ON=32;
177 <DISP FILE:FILE=OLD.CA.IC.UCHA;
178 <SKIPCMD:LABEL=T351,ON=32;
179 <DEL FILE:FILE=OLD.CA.IC.UCHA;
180 .T351 <DISP FILE:FILE=TCA.CA.IC.UCHA;
181 <SKIPCMD:LABEL=T36,ON=32;
182 <CAT FILE:FILE=OLD.CA.IC.UCHA/TCA.CA.IC.UCHA;
183 /
184 .T36 <STEP;
185 /
186 .T361 <DISP FILE:FILE=CA.SU.UCHA;
187 <SKIPCMD:LABEL=T362,ON=32;
188 <TRANS FILE:FILE=TCA.CA.SU.UCHA/CA.SU.UCHA,MODE=CRD;
189 <SKIPCMD:LABEL=AB4,ON=32;
190 /
191 .T362 <DISP FILE:FILE=CA.TR.UCHA;
192 <SKIPCMD:LABEL=T363,ON=32;
193 <TRANS FILE:FILE=TCA.CA.TR.UCHA/CA.TR.UCHA,MODE=CRD;
194 <SKIPCMD:LABEL=AB4,ON=32;
195 /
196 .T363 <DISP FILE:FILE=CA.ST.UCHA;
197 <SKIPCMD:LABEL=T364,ON=32;
198 <TRANS FILE:FILE=TCA.CA.ST.UCHA/CA.ST.UCHA,MODE=CRD;
199 <SKIPCMD:LABEL=AB4,ON=32;
200 /

A30808-X3080-C485-5-7620 MMN:SW-COFIP-103
MMN:SW Maintenance
Software

M11AP

201 .T364 <DISP FILE:FILE=CA.TF.UCHA;

202 <SKIPCMD:LABEL=T365,ON=32;
203 <TRANS FILE:FILE=TCA.CA.TF.UCHA/CA.TF.UCHA,MODE=CRD;
204 <SKIPCMD:LABEL=AB4,ON=32;
205 /
206 .T365 <DISP FILE:FILE=CA.IC.UCHA;
207 <SKIPCMD:LABEL=T37,ON=32;
208 <MOD FILEAUT:FILE=CA.IC.UCHA,AR=NODEL&NOWR&NOCN;
209 <TRANS FILE:FILE=TCA.CA.IC.UCHA/CA.IC.UCHA,MODE=CRD;
210 <SKIPCMD:LABEL=AB4,ON=32;
211 /
212 .T37 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
213 /
214 .M4 <STEP;
215 //
216 // **************************************
217 // * TAPE SAVING OF METER FILES STARTED *
218 // **************************************
219 //
220 /
221 <DISP FILE:FILE=DUMMY.MET,VSN=LOGTAP;
222 <SKIPCMD:LABEL=T40,ON=32;
223 /
224 <DEL FILE:FILE=DUMMY.MET,VSN=LOGTAP;
225 /
226 .T40 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=DUMMY.MET;
227 <SKIPCMD:LABEL=AB5,ON=32;
228 /
229 .T41 <DISP FILE:FILE=CA.SU.UCHA;
230 <SKIPCMD:LABEL=T42,ON=32;
231 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=CA.SU.UCHA;
232 <SKIPCMD:LABEL=AB5,ON=32;
233 /
234 <DISP FILE:FILE=OLD.CA.SU.UCHA;
235 <SKIPCMD:LABEL=T42,ON=32;
236 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=OLD.CA.SU.UCHA;
237 <SKIPCMD:LABEL=AB5,ON=32;
238 /
239 .T42 <DISP FILE:FILE=CA.TR.UCHA;
240 <SKIPCMD:LABEL=T43,ON=32;
241 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=CA.TR.UCHA;
242 <SKIPCMD:LABEL=AB5,ON=32;
243 /
244 <DISP FILE:FILE=OLD.CA.TR.UCHA;
245 <SKIPCMD:LABEL=T43,ON=32;
246 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=OLD.CA.TR.UCHA;
247 <SKIPCMD:LABEL=AB5,ON=32;
248 /
249 .T43 <DISP FILE:FILE=CA.ST.UCHA;
250 <SKIPCMD:LABEL=T44,ON=32;

MMN:SW-COFIP-104 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

M11AP

251 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=CA.ST.UCHA;

252 <SKIPCMD:LABEL=AB5,ON=32;
253 /
254 <DISP FILE:FILE=OLD.CA.ST.UCHA;
255 <SKIPCMD:LABEL=T44,ON=32;
256 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=OLD.CA.ST.UCHA;
257 <SKIPCMD:LABEL=AB5,ON=32;
258 /
259 .T44 <DISP FILE:FILE=CA.TF.UCHA;
260 <SKIPCMD:LABEL=T45,ON=32;
261 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=CA.TF.UCHA;
262 <SKIPCMD:LABEL=AB5,ON=32;
263 /
264 <DISP FILE:FILE=OLD.CA.TF.UCHA;
265 <SKIPCMD:LABEL=T45,ON=32;
266 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=OLD.CA.TF.UCHA;
267 <SKIPCMD:LABEL=AB5,ON=32;
268 /
269 .T45 <DISP FILE:FILE=CA.IC.UCHA;
270 <SKIPCMD:LABEL=T46,ON=32;
271 <MOD FILEAUT:FILE=CA.IC.UCHA,AR=NODEL&NOWR&NOCN;
272 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=CA.IC.UCHA;
273 <SKIPCMD:LABEL=AB5,ON=32;
274 /
275 <DISP FILE:FILE=OLD.CA.IC.UCHA;
276 <SKIPCMD:LABEL=T46,ON=32;
277 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=OLD.CA.IC.UCHA;
278 <SKIPCMD:LABEL=AB5,ON=32;
279 /
280 .T46 <ACT FNS:FNS=CA;
281 /
282 .M5 <STEP;
283 //
284 // ************************************
285 // * TAPE SAVING OF METER FILES ENDED *
286 // ************************************
287 //
288 <REWIND MT:VSN=LOGTAP;
289 /
290 <DEL FILE:FILE=DUMMY.MET;
291 <STEP;
292 /
293 <SKIPCMD:LABEL=M6;
294 /
295 .M6 <REWIND MT:VSN=LOGTAP;
296 <DISP FILE:VSN=LOGTAP,FILE=SY.GENLIST;
297 <SKIPCMD:LABEL=T62,ON=32;
298 .T61 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
299 //
300 // **********************************

A30808-X3080-C485-5-7620 MMN:SW-COFIP-105
MMN:SW Maintenance
Software

M11AP

301 // * DISPLAYING METER TAPE CONTENTS *

302 // **********************************
303 //
304 <DISP GEN:VSN=LOGTAP;
305 <SKIPCMD:LABEL=OUT2,ON=32;
306 <DISP FILE:VSN=LOGTAP;
307 <SKIPCMD:LABEL=OUT1,ON=32;
308 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
309 <SKIPCMD:LABEL=M7;
310 .T62 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
311 //
312 // **********************************
313 // * DISPLAYING METER TAPE CONTENTS *
314 // **********************************
315 //
316 <DISP FILE:VSN=LOGTAP;
317 <SKIPCMD:LABEL=OUT1,ON=32;
318 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
319 /
320 .M7 <SKIPCMD:LABEL=OUT;
321 / *******************************
322 / * FAULT EXITS AND END MESSAGE *
323 / *******************************
324 /
325 /
326 .AB2 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
327 // ****************
328 // *** FAULT 02 ***
329 // ****************
330 //
331 // **********************************************************
332 // *** PREPARATION FOR TAPE SAVING METER FILES ***
333 // *** NOT EXECUTED. ***
334 // *** TAPE DEVICE OFFLINE OR DEFECTIVE ***
335 // *** OR TAPE DAMAGED: ***
336 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
337 // *** ***
338 // *** (IF NECESSARY FAULT CLEARANCE IS TO BE DONE ***
339 // *** ACCORDING TO MMN:CP113 PROCEDURE CP891.) ***
340 // *** ***
341 // *** (IF THE COMMAND FILE WAS STARTED WITH A TIME JOB,) ***
342 // *** (ENTER: SETCFOPT:OFF=1&2&4&&9,ON=3,SCOPE=GLOBAL; ) ***
343 // *** ***
344 // *** START COMMAND FILE CG.SA.M11AP AGAIN. ***
345 // **********************************************************
346 /
347 <REWIND MT:VSN=LOGTAP;
348 /
349 <SETCFOPT:OFF=1&2&4&&9,ON=3,SCOPE=GLOBAL;
350 <SKIPCMD:LABEL=END;

MMN:SW-COFIP-106 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

M11AP

351 /
352 .AB3 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
353 // ****************
354 // *** FAULT 03 ***
355 // ****************
356 //
357 // **********************************************************
358 // *** DISK SAVING OF METERS NOT EXECUTED. ***
359 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
360 // *** ***
361 // *** (IF THE COMMAND FILE WAS STARTED WITH A TIME JOB,) ***
362 // *** (ENTER: SETCFOPT:OFF=1&&3&5&&9,ON=4,SCOPE=GLOBAL;) ***
363 // *** ***
364 // *** START COMMAND FILE CG.SA.M11AP AGAIN. ***
365 // **********************************************************
366 /
367 <ACT FNS:FNS=CA;
368 /
369 <SETCFOPT:OFF=1&&3&5&&9,ON=4,SCOPE=GLOBAL;
370 <SKIPCMD:LABEL=END;
371 /
372 .AB4 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
373 // ****************
374 // *** FAULT 04 ***
375 // ****************
376 //
377 // **********************************************************
378 // *** DISK SAVING OF TEMPORARY METER FILES ***
379 // *** NOT EXECUTED. ***
380 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
381 // *** ***
382 // *** (IF THE COMMAND FILE WAS STARTED WITH A TIME JOB,) ***
383 // *** (ENTER: SETCFOPT:OFF=1&&4&6&&9,ON=5,SCOPE=GLOBAL;) ***
384 // *** ***
385 // *** START COMMAND FILE CG.SA.M11AP AGAIN. ***
386 // **********************************************************
387 /
388 <ACT FNS:FNS=CA;
389 <DEL FILE:FILE=TCA.;
390 <STEP;
391 /
392 <SETCFOPT:OFF=1&&4&6&&9,ON=5,SCOPE=GLOBAL;
393 <SKIPCMD:LABEL=END;
394 /
395 .AB5 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
396 // ****************
397 // *** FAULT 05 ***
398 // ****************
399 //
400 // **********************************************************

A30808-X3080-C485-5-7620 MMN:SW-COFIP-107
MMN:SW Maintenance
Software

M11AP

401 // *** TAPE SAVING OF METER FILES NOT EXECUTED. ***

402 // *** TAPE IS DAMAGED OR FILES ARE NOT AVAILABLE: ***
403 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
404 // *** ***
405 // *** (IF THE COMMAND FILE WAS STARTED WITH A TIME JOB,) ***
406 // *** (ENTER: SETCFOPT:OFF=1&&5&7&&9,ON=6,SCOPE=GLOBAL;) ***
407 // *** ***
408 // *** START COMMAND FILE CG.SA.M11AP AGAIN. ***
409 // **********************************************************
410 /
411 <ACT FNS:FNS=CA;
412 /
413 <SETCFOPT:OFF=1&&5&7&&9,ON=6,SCOPE=GLOBAL;
414 <SKIPCMD:LABEL=END;
415 /
416 .OUT <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
417 /
418 // ****************
419 // *** FINISHED ***
420 // ****************
421 //
422 //
423 // *****************************************************************
424 // *** THE DISPLAYED TAPE CONTENTS IS TO BE COMPARED WITH THE ***
425 // *** DESIRED CONTENTS (SEE SAVING SCHEDULE IN SW210). ***
426 // *** AFTER THAT ONE HAS TO DECIDE WHETHER OR NOT THE METER ***
427 // *** SAVING WAS SUCCESSFUL: ***
428 // *** ***
429 // *** ***
430 // *** FAULT FREE: THE ACTUAL AND THE EXPECTED TAPE CONTENTS ***
431 // *** =========== (AT THE TIME METER SAVING IS EXECUTED) ARE ***
432 // *** IDENTICAL. ***
433 // *** ***
434 // *** ***
435 // *** FAULTY: DEVIATIONS FROM THE EXPECTED TAPE CONTENTS: ***
436 // *** ======= ***
437 // *** ***
438 // *** 1. THE WHOLE TAPE CONTENTSSOR THE FIXPOINT IS DESTROYED:***
439 // *** ------------------------------------------------------- ***
440 // *** ***
441 // *** MEASURES: ***
442 // *** ***
443 // *** - UNMOUNT TAPE AND MARK AS DEFECTIVE. ***
444 // *** - CLEAN MAGNETIC TAPE DEVICE ACCORDING TO MMN:CP113 ***
445 // *** PROCEDURE MAINT:MTD ***
446 // *** - MOUNT A NEW AND TESTED TAPE AND INITIALIZE AS LOGTAP: ***
447 // *** ***
448 // *** INIT MT:MTD=00,CD=EBC,DENS=6250,VSN=LOGTAP; ***
449 // *** ***
450 // *** - THE NEXT ROUTINE OR QUARTERLY SAVING ACCORDING TO THE ***

MMN:SW-COFIP-108 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

M11AP

451 // *** SAVING SCHEDULE IS TO BE CARRIED OUT IMMEDIATELY. ***

452 // *** ***
453 // *** ***
454 // *** 2. LOG FILE(S) ARE FAULTY OR MISSING: ***
455 // *** ------------------------------------- ***
456 // *** ***
457 // *** MEASURES: ***
458 // *** ***
459 // *** - DELETE FILE DUMMY.MET (IF EXISTING) FROM THE LOGTAP. ***
460 // *** - TRANSFER ALL MISSING LOG FILES FROM DISK TO LOGTAP ***
461 // *** (RENAME TLG.LG(LQ). FILES ON DISK INTO THE ***
462 // *** CORRESPONDING LG(LQ). FILES ON TAPE): ***
463 // *** ***
464 // *** TRANS FILE:FILE=LG(LQ).LOGx.Ax/TLG.LG(LQ).LOGx.Ax, ***
465 // *** VSNR=LOGTAP,COPMOD=SSWF; ***
466 // *** ***
467 // *** - AFTER THAT METER SAVING IS TO BE CARRIED OUT AGAIN. ***
468 // *** ***
469 // *** NOTE: ***
470 // *** ----- ***
471 // *** IF, AFTER REPAIRING THE TAPE CONTENTS, NEW PROBLEMS ***
472 // *** OCCUR WITH THAT TAPE, THE MEASURES DESCRIBED UNDER ***
473 // *** POINT 1 ARE TO BE CARRIED OUT. ***
474 // *** ***
475 // *** ***
476 // *** 3. METER FILE(S) FAULTY OR MISSING: ***
477 // *** ------------------------------------------------------ ***
478 // *** ***
479 // *** MEASURE: ***
480 // *** ***
481 // *** METER SAVING IS TO BE CARRIED OUT AGAIN. ***
482 // *** ***
483 // *** NOTE: ***
484 // *** ----- ***
485 // *** IF, AFTER REPAIRING THE TAPE CONTENTS, NEW PROBLEMS ***
486 // *** OCCUR WITH THAT TAPE, THE MEASURES DESCRIBED UNDER ***
487 // *** POINT 1 ARE TO BE CARRIED OUT. ***
488 // *****************************************************************
489 //
490 // *****************************************
491 // *** METER ROUTINE SAVING IS FINISHED. ***
492 // *****************************************
493 /
494 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
495 <SKIPCMD:LABEL=END;
496 /
497 .OUT1 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
498 /
499 // ****************************
500 // *** FINISHED WITH FAULTS ***

A30808-X3080-C485-5-7620 MMN:SW-COFIP-109
MMN:SW Maintenance
Software

M11AP

501 // ****************************
502 //
503 // **********************************************************
504 // *** NO FILES ON TAPE. ***
505 // *** ***
506 // *** TAPE DEVICE OFFLINE OR DEFECTIVE ***
507 // *** OR TAPE DAMAGED: ***
508 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
509 // *** ***
510 // *** DISCARD THE TAPE. ***
511 // *** ***
512 // *** (IF NECESSARY FAULT CLEARANCE IS TO BE DONE ***
513 // *** ACCORDING TO MMN:CP113 PROCEDURE CP891.) ***
514 // *** ***
515 // *** THE NEXT ROUTINE OR QUARTERLY SAVING ACCORDING TO ***
516 // *** THE SAVING SCHEDULE IS TO BE CARRIED OUT ***
517 // *** IMMEDIATELY. ***
518 // *** ***
519 // *** METER ROUTINE SAVING IS FINISHED. ***
520 // **********************************************************
521 /
522 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
523 <SKIPCMD:LABEL=END;
524 /
525 .OUT2 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
526 /
527 // ****************************
528 // *** FINISHED WITH FAULTS ***
529 // ****************************
530 //
531 // **********************************************************
532 // *** GENERATION FIXPOINT ON TAPE IS DESTROYED. ***
533 // *** ***
534 // *** TAPE DEVICE OFFLINE OR DEFECTIVE ***
535 // *** OR TAPE DAMAGED: ***
536 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
537 // *** ***
538 // *** DISCARD THE TAPE. ***
539 // *** ***
540 // *** (IF NECESSARY FAULT CLEARANCE IS TO BE DONE ***
541 // *** ACCORDING TO MMN:CP113 PROCEDURE CP891.) ***
542 // *** ***
543 // *** THE NEXT ROUTINE OR QUARTERLY SAVING ACCORDING TO ***
544 // *** THE SAVING SCHEDULE IS TO BE CARRIED OUT. ***
545 // *** ***
546 // *** METER ROUTINE SAVING IS FINISHED. ***
547 // **********************************************************
548 /
549 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
550 <SKIPCMD:LABEL=END;

MMN:SW-COFIP-110 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

M11AP

551 /
552 .END <SETCFOPT:ACKCFS=ERROR,DANCMD=NOEXEC,ACKREQ=NEG,SCOPE=GLOBAL;
553 <ENDFILE;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-111
MMN:SW Maintenance
Software

Q11AP

1 <CMDFILE;
2 /
3 // 80-Q11AP-05
4 /
5 /****V05***************************************************************
6 /* *
7 /* COMMAND FILE CG.SA.Q11AP QUARTERLY SAVE OF APS ON TAPE (PART 1) *
8 /* =============================================================== *
9 /* *
10 /* TASK DESCRIPTION: *
11 /* ----------------- *
12 /* *
13 /* - PREPARATION FOR CREATING FALL BACK GENERATION *
14 /* - TAPE SAVING OF LOG FILES *
15 /* *
16 /* FAULT HANDLING: *
17 /* --------------- *
18 /* - AFTER INTERRUPTION OF THE FILE PROCESSING VIA FAULT *
19 /* EXITS AND CORRESPONDING FAULT HANDLING THE FILE CAN *
20 /* BE STARTED AGAIN *
21 /* *
22 /* SWITCH PRESETTINGS FOR START POINTS AND ENTRY POINTS: *
23 /* ===================================================== *
24 /* START POINT SWITCH PRESETTINGS *
25 /* ----------- ------------------ *
26 /* RESETCFOPT; *
27 /* *
28 /* ENTRY POINT SWITCH PRESETTINGS *
29 /* ----------- ------------------ *
30 /* M3 SETCFOPT:OFF=1&3&&10,ON=2,SCOPE=GLOBAL; *
31 /* M4 SETCFOPT:OFF=1&2&4&&10,ON=3,SCOPE=GLOBAL; *
32 /* M6 SETCFOPT:OFF=1&&3&5&&10,ON=4,SCOPE=GLOBAL; *
33 /* *
34 /* FAULT 01 SETCFOPT:OFF=1&3&&10,ON=2,SCOPE=GLOBAL; *
35 /* FAULT 02 SETCFOPT:OFF=1&2&4&&10,ON=3,SCOPE=GLOBAL; *
36 /* FAULT 03 SETCFOPT:OFF=1&&3&5&&10,ON=4,SCOPE=GLOBAL; *
37 /* *
38 /**********************************************************************
39 /
40 <SETCFOPT:ACKCFS=ERROR,DANCMD=EXEC,ACKREQ=POS,SCOPE=GLOBAL;
41 /
42 <SKIPCMD:LABEL=END,ON=1;
43 <SKIPCMD:LABEL=M3,ON=2;
44 <SKIPCMD:LABEL=M4,ON=3;
45 <SKIPCMD:LABEL=M6,ON=4;
46 /
47 .M1 <STEP;
48 <DISP FILE:FILE=LG.;
49 <SKIPCMD:LABEL=T11,ON=32;
50 <SKIPCMD:LABEL=T12;

MMN:SW-COFIP-112 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

Q11AP

51 /
52 .T11 <SETCFOPT:ON=16,SCOPE=GLOBAL;
53 <SKIPCMD:LABEL=M2;
54 /
55 .T12 <DISP FILE:FILE=LG.LOG6.;
56 <SKIPCMD:LABEL=OUT1,ON=32;
57 /
58 .M2 <STEP;
59 //
60 // ****************************************************
61 // * DISPLAYING GENERATION STATUS AND LOG FILE STATUS *
62 // ****************************************************
63 //
64 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
65 <DISP GEN:DISPL=LIST;
66 <DISP GEN:DISPL=FILES;
67 <STAT LOG;
68 <DISP FILE:FILE=LG.;
69 <DISP FILE:FILE=LQ.;
70 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
71 /
72 .T21 <DISP FILE:FILE=DUMMY.QAP;
73 <SKIPCMD:LABEL=M3,OFF=32;
74 <CR FILE:FILE=DUMMY.QAP,SIZE=24,TYPE=DOUBLE;
75 /
76 .M3 <STEP;
77 <SKIPCMD:LABEL=OUT2,ON=16;
78 //
79 // *********************
80 // * CHANGING LOG FILE *
81 // *********************
82 //
83 <MOD LOGFILE:FILE=LOG1,SIZE=24,ERASE=YES;
84 <SKIPCMD:LABEL=AB1,ON=32;
85 /
86 .T31 <DISP FILE:FILE=TLG.LG.LOG6.;
87 <SKIPCMD:LABEL=T32,ON=32;
88 <DEL FILE:FILE=TLG.LG.LOG6.;
89 .T32 <DISP FILE:FILE=TLG.LQ.LOG6.;
90 <SKIPCMD:LABEL=M4,ON=32;
91 <DEL FILE:FILE=TLG.LQ.LOG6.;
92 /
93 .M4 <STEP;
94 //
95 // ***********************************
96 // * DISK SAVING OF CLOSED LOG FILES *
97 // ***********************************
98 //
99 <TRANS FILE:FILE=TLG.LG.LOG6./LG.LOG6.,MODE=CRD;
100 <SKIPCMD:LABEL=AB2,ON=32;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-113
MMN:SW Maintenance
Software

Q11AP

101 /
102 <DISP FILE:FILE=LQ.;
103 <SKIPCMD:LABEL=T41,ON=32;
104 <TRANS FILE:FILE=TLG.LQ.LOG6./LQ.LOG6.,MODE=CRD;
105 <SKIPCMD:LABEL=AB2,ON=32;
106 /
107 .T41 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
108 <STAT LOG;
109 <DISP FILE:FILE=LG.;
110 <DISP FILE:FILE=LQ.;
111 <DISP FILE:FILE=TLG.;
112 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
113 /
114 .M5 <STEP;
115 /
116 <DISP FILE:FILE=DUMMY.MET,VSN=LOGTAP;
117 <SKIPCMD:LABEL=M6,ON=32;
118 /
119 //
120 // *******************************
121 // * DELETING CHARGE METER FILES *
122 // *******************************
123 /
124 <DEL FILE:FILE=DUMMY.MET,VSN=LOGTAP;
125 /
126 .M6 <STEP;
127 /
128 //
129 // ********************************
130 // * LOG FILE TAPE SAVING STARTED *
131 // ********************************
132 /
133 <DACT FNS:FNS=LG;
134 /
135 <DISP FILE:FILE=LQ.;
136 <SKIPCMD:LABEL=T61,ON=32;
137 <DACT FNS:FNS=LQ;
138 /
139 .T61 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LG.LOG6.A0;
140 <SKIPCMD:LABEL=AB3,ON=32;
141 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LG.LOG6.A1;
142 <SKIPCMD:LABEL=AB3,ON=32;
143 <DISP FILE:FILE=LG.LOG6.A2;
144 <SKIPCMD:LABEL=T62,ON=32;
145 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LG.LOG6.A2;
146 <SKIPCMD:LABEL=AB3,ON=32;
147 <DISP FILE:FILE=LG.LOG6.A3;
148 <SKIPCMD:LABEL=T62,ON=32;
149 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LG.LOG6.A3;
150 <SKIPCMD:LABEL=AB3,ON=32;

MMN:SW-COFIP-114 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

Q11AP

151 /
152 .T62 <DISP FILE:FILE=LQ.;
153 <SKIPCMD:LABEL=T64,ON=32;
154 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LQ.LOG6.A1;
155 <SKIPCMD:LABEL=AB3,ON=32;
156 <DISP FILE:FILE=LQ.LOG6.A2;
157 <SKIPCMD:LABEL=T63,ON=32;
158 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LQ.LOG6.A2;
159 <SKIPCMD:LABEL=AB3,ON=32;
160 <DISP FILE:FILE=LQ.LOG6.A3;
161 <SKIPCMD:LABEL=T63,ON=32;
162 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LQ.LOG6.A3;
163 <SKIPCMD:LABEL=AB3,ON=32;
164 /
165 .T63 <DEL FILE:FILE=LQ.LOG6.;
166 <ACT FNS:FNS=LQ;
167 /
168 .T64 <DEL FILE:FILE=LG.LOG6.;
169 <ACT FNS:FNS=LG;
170 /
171 .M7 <STEP;
172 /
173 //
174 // ******************************
175 // * LOG FILE TAPE SAVING ENDED *
176 // ******************************
177 /
178 <REWIND MT:VSN=LOGTAP;
179 /
180 .M8 <STEP;
181 /
182 //
183 // ***************************************
184 // * LISTING LOG FILE SAVE TAPE CONTENTS *
185 // ***************************************
186 /
187 <DISP FILE:FILE=SY.GENLIST,VSN=LOGTAP;
188 <SKIPCMD:LABEL=T82,ON=32;
189 /
190 .T81 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
191 <DISP GEN:VSN=LOGTAP;
192 <DISP FILE:VSN=LOGTAP;
193 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
194 /
195 <SKIPCMD:LABEL=M9;
196 /
197 .T82 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
198 <DISP FILE:VSN=LOGTAP;
199 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
200 /

A30808-X3080-C485-5-7620 MMN:SW-COFIP-115
MMN:SW Maintenance
Software

Q11AP

201 .M9 <STEP;

202 //
203 // ****************************************************
204 // * DISPLAYING GENERATION STATUS AND LOG FILE STATUS *
205 // ****************************************************
206 //
207 /
208 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
209 <DISP GEN:DISPL=LIST;
210 <DISP GEN:DISPL=FILES;
211 <STAT LOG;
212 <DISP FILE:FILE=LG.;
213 <DISP FILE:FILE=LQ.;
214 <DISP FILE:FILE=TLG.;
215 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
216 /
217 <SKIPCMD:LABEL=OUT2,ON=16;
218 <SKIPCMD:LABEL=OUT;
219 / *******************************
220 / * FAULT EXITS AND END MESSAGE *
221 / *******************************
222 /
223 .AB1 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
224 // ****************
225 // *** FAULT 01 ***
226 // ****************
227 //
228 // **********************************************
229 // *** CHANGING LOG FILE NOT EXECUTED. ***
230 // *** ***
231 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
232 // *** ***
233 // *** START COMMAND FILE CG.SA.Q11AP AGAIN. ***
234 // **********************************************
235 /
236 <SETCFOPT:OFF=1&3&&10,ON=2,SCOPE=GLOBAL;
237 <SKIPCMD:LABEL=END;
238 /
239 .AB2 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
240 // ****************
241 // *** FAULT 02 ***
242 // ****************
243 //
244 // **********************************************
245 // *** DISK SAVING OF CLOSED LOG FILES ***
246 // *** NOT EXECUTED. ***
247 // *** ***
248 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
249 // *** ***
250 // *** START COMMAND FILE CG.SA.Q11AP AGAIN. ***

MMN:SW-COFIP-116 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

Q11AP

251 // **********************************************
252 /
253 <SETCFOPT:OFF=1&2&4&&10,ON=3,SCOPE=GLOBAL;
254 <SKIPCMD:LABEL=END;
255 /
256 .AB3 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
257 // ****************
258 // *** FAULT 03 ***
259 // ****************
260 //
261 // ***************************************************
262 // *** TAPE SAVING OF LOG FILES NOT EXECUTED. ***
263 // *** TAPE IS DAMAGED OR FILES ARE NOT AVAILABLE: ***
264 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
265 // *** ***
266 // *** START COMMAND FILE CG.SA.Q11AP AGAIN. ***
267 // ***************************************************
268 /
269 <ACT FNS:FNS=LG;
270 /
271 <DISP FILE:FILE=LQ.;
272 <SKIPCMD:LABEL=AB31,ON=32;
273 <ACT FNS:FNS=LQ;
274 /
275 .AB31 <REWIND MT:VSN=LOGTAP;
276 /
277 <SETCFOPT:OFF=1&&3&5&&10,ON=4,SCOPE=GLOBAL;
278 <SKIPCMD:LABEL=END;
279 /
280 .OUT <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
281 /
282 // *******************************
283 // *** FINISHED WITHOUT FAULTS ***
284 // *******************************
285 //
286 // ************************************************
287 // *** APS QUARTERLY SAVING PART 1 IS FINISHED. ***
288 // ************************************************
289 /
290 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
291 <SKIPCMD:LABEL=END;
292 /
293 .OUT1 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
294 /
295 // ****************************
296 // *** FINISHED WITH FAULTS ***
297 // ****************************
298 //
299 // *********************************************************
300 // *** APS QUARTERLY SAVING HAS BEEN INTERRUPTED BECAUSE ***

A30808-X3080-C485-5-7620 MMN:SW-COFIP-117
MMN:SW Maintenance
Software

Q11AP

301 // *** APS ROUTINE SAVING IS SCHEDULED. ***

302 // *** ***
303 // *** EXECUTE PROCEDURE SW210 FOR APS ROUTINE SAVING. ***
304 // *********************************************************
305 /
306 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
307 <SKIPCMD:LABEL=END;
308 /
309 .OUT2 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
310 /
311 // ****************************
312 // *** FINISHED WITH FAULTS ***
313 // ****************************
314 //
315 // ************************************************
316 // *** NO LOG FILE FOR QUARTERLY SAVING EXISTS. ***
317 // *** APS QUARTERLY SAVING PART 1 IS FINISHED. ***
318 // ************************************************
319 /
320 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
321 <SKIPCMD:LABEL=END;
322 /
323 .END <SETCFOPT:ACKCFS=ERROR,DANCMD=NOEXEC,ACKREQ=NEG,SCOPE=GLOBAL;
324 <ENDFILE;

MMN:SW-COFIP-118 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

Q12AP

1 <CMDFILE;
2 /
3 // 80-Q12AP-05
4 /
5 /****V05***************************************************************
6 /* *
7 /* COMMAND FILE CG.SA.Q12AP QUARTERLY SAVE OF APS ON TAPE (PART 2) *
8 /* =============================================================== *
9 /* *
10 /* TASK DESCRIPTION: *
11 /* ----------------- *
12 /* *
13 /* - CREATING FALL BACK GENERATION ON DISKS AND TAPE *
14 /* *
15 /* HOLD TAPE READY / LOADING MAGNETIC TAPE DEVICE: *
16 /* ----------------------------------------------- *
17 /* - TWO LARGE TAPES WITH WRITE RING ARE TO BE HELD READY *
18 /* FOR APS QUARTERLY SAVING *
19 /* *
20 /* - BEFORE STARTING THE COMMAND FILE THE MAGNETIC TAPE DEVICE *
21 /* IS TO BE LOADED WITH THE 1. APS SAVE TAPE AND SWITCHED *
22 /* TO ONLINE *
23 /* *
24 /* FAULT HANDLING: *
25 /* --------------- *
26 /* - AFTER INTERRUPTION OF THE FILE PROCESSING VIA FAULT *
27 /* EXITS AND CORRESPONDING FAULT HANDLING THE FILE CAN *
28 /* BE STARTED AGAIN *
29 /* *
30 /* SWITCH PRESETTINGS FOR START POINTS AND ENTRY POINTS: *
31 /* ===================================================== *
32 /* START POINT SWITCH PRESETTINGS *
33 /* ----------- ------------------ *
34 /* RESETCFOPT; *
35 /* *
36 /* ENTRY POINT SWITCH PRESETTINGS *
37 /* ----------- ------------------ *
38 /* M2 SETCFOPT:OFF=1&3&&10,ON=2,SCOPE=GLOBAL; *
39 /* M4 SETCFOPT:OFF=1&2&4&&10,ON=3,SCOPE=GLOBAL; *
40 /* M4 SETCFOPT:OFF=1&&3&5&&10,ON=4,SCOPE=GLOBAL; *
41 /* M4 SETCFOPT:OFF=1&&4&6&&10,ON=5,SCOPE=GLOBAL; *
42 /* *
43 /* FAULT 01, 02 SETCFOPT:OFF=1&3&&10,ON=2,SCOPE=GLOBAL; *
44 /* FAULT 02 SETCFOPT:OFF=1&2&4&&10,ON=3,SCOPE=GLOBAL; *
45 /* FAULT 03 SETCFOPT:OFF=1&&3&5&&10,ON=4,SCOPE=GLOBAL; *
46 /* FAULT 05 SETCFOPT:OFF=1&&4&6&&10,ON=5,SCOPE=GLOBAL; *
47 /* *
48 /**********************************************************************
49 /
50 <SETCFOPT:ACKCFS=ERROR,DANCMD=EXEC,ACKREQ=POS,SCOPE=GLOBAL;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-119
MMN:SW Maintenance
Software

Q12AP

51 /
52 <SKIPCMD:LABEL=END,ON=1;
53 <SKIPCMD:LABEL=M2,ON=2;
54 <SKIPCMD:LABEL=M4,ON=3;
55 <SKIPCMD:LABEL=M4,ON=4;
56 <SKIPCMD:LABEL=M4,ON=5;
57 /
58 .M1 <STEP;
59 /
60 <DISP FILE:FILE=LG.LOG1.;
61 <SKIPCMD:LABEL=OUT1,ON=32;
62 /
63 //
64 // ****************************************************
65 // * DISPLAYING GENERATION STATUS AND LOG FILE STATUS *
66 // ****************************************************
67 //
68 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
69 <DISP GEN:DISPL=LIST;
70 <DISP GEN:DISPL=FILES;
71 <STAT LOG;
72 <DISP FILE:FILE=LG.;
73 <DISP FILE:FILE=LQ.;
74 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
75 /
76 .T11 <DISP FILE:FILE=DUMMY.QAP;
77 <SKIPCMD:LABEL=M2,ON=32;
78 <DEL FILE:FILE=DUMMY.QAP;
79 /
80 .M2 <STEP;
81 //
82 // *********************************
83 // * LABELING GENERATION SAVE TAPE *
84 // *********************************
85 //
86 <INIT MT:VSN=SA1TAP,MTD=00,CD=EBC,DENS=6250;
87 <SKIPCMD:LABEL=AB1,ON=32;
88 /
89 .M3 <STEP;
90 //
91 // ***************************************************
92 // * CREATING DISK/TAPE FALL BACK GENERATION STARTED *
93 // ***************************************************
94 //
95 // ******************************************************************
96 // * *
97 // * ATTENTION *
98 // * ========= *
99 // * *
100 // * IF THE TAPE IS FILLED UP BEFORE THE TRANSFER OF THE GENERATION *

MMN:SW-COFIP-120 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

Q12AP

101 // * IS COMPLETED (ONE TIMES OR SEVERAL TIMES). *

102 // * THE FOLLOWING MESSAGES WILL BE DISPLAYED: *
103 // * *
104 // * COPYGEN:OUTPUT=TAPE,VERIFY=YES,VSN=SA1TAP,TYPE=GOLDEN, *
105 // * REWIND=NO; *
106 // * *
107 // * PLEASE MOUNT CONTINUATION TAPE TO VSN = SAxTAP *
108 // * *
109 // * (x=1, 2, ..., n) *
110 // * *
111 // * THEN REMOVE THE APS SAVE TAPE FROM MAGNETIC TAPE DEVICE AND *
112 // * LOAD THE MAGNETIC TAPE DEVICE WITH THE FIRST OR NEXT *
113 // * CONTINUATION TAPE. *
114 // ******************************************************************
115 /
116 //
117 // ******************************************************************
118 // * *
119 // * AFTER THAT TYPE IN MANUALLY: *
120 // * ============================ *
121 // * *
122 // * INIT MT:VSN=SAyTAP,MTD=00,CD=EBC,DENS=6250; *
123 // * (y=2, 3, ..., n) *
124 // * *
125 // * MOUNT TAPE:DEV=MTD-00; *
126 // * *
127 // ******************************************************************
128 /
129 <COPY GEN:OUTPUT=TAPMOD,VERIFY=YES,VSN=SA1TAP,TYPE=GOLDEN,REWIND=NO;
130 <SKIPCMD:LABEL=AB2,ON=32;
131 /
132 .M4 <STEP;
133 //
134 // ********************************
135 // * COPYING GENERATIONLESS FILES *
136 // ********************************
137 //
138 // ******************************************************************
139 // * ATTENTION *
140 // * ========= *
141 // * IF THE TAPE IS FILLED UP BEFORE THE TRANSFER OF THE GENERATION *
142 // * IS COMPLETED, ONE OF THE FOLLOWING MESSAGES WILL BE DISPLAYED: *
143 // * *
144 // * TRANSFILE:FILE=SY.MSGXREF,VSNR=SA1TAP,COPMOD=SSWF; *
145 // * PLEASE MOUNT CONTINUATION TAPE TO VSN = SAxTAP *
146 // * (x=1, 2, ..., n) *
147 // * TRANSFILE:FILE=SJ.SECDATA,VSNR=SA1TAP,COPMOD=SSWF; *
148 // * PLEASE MOUNT CONTINUATION TAPE TO VSN = SAxTAP *
149 // * (x=1, 2, ..., n) *
150 // * TRANSFILE:FILE=CG.SA.,VSNR=SA1TAP,COPMOD=SSWF; *

A30808-X3080-C485-5-7620 MMN:SW-COFIP-121
MMN:SW Maintenance
Software

Q12AP

151 // * PLEASE MOUNT CONTINUATION TAPE TO VSN = SAxTAP *

152 // * (x=1, 2, ..., n) *
153 // * *
154 // * THEN REMOVE THE APS SAVE TAPE FROM MAGNETIC TAPE DEVICE AND *
155 // * LOAD THE MAGNETIC TAPE DEVICE WITH THE FIRST OR NEXT *
156 // * CONTINUATION TAPE. *
157 // ******************************************************************
158 /
159 //
160 // ******************************************************************
161 // * *
162 // * AFTER THAT TYPE IN MANUALLY: *
163 // * ============================ *
164 // * *
165 // * INIT MT:VSN=SAyTAP,MTD=00,CD=EBC,DENS=6250; *
166 // * (y=2, 3, ..., n) *
167 // * *
168 // * MOUNT TAPE:DEV=MTD-00; *
169 // * *
170 // ******************************************************************
171 /
172 .T41 <STEP;
173 <SKIPCMD:LABEL=T42,ON=3;
174 <SKIPCMD:LABEL=T43,ON=4;
175 <SKIPCMD:LABEL=T44,ON=5;
176 /
177 .T42 <TRANS FILE:VSNR=SA1TAP,COPMOD=SSWF,FILE=SY.MSGXREF;
178 <SKIPCMD:LABEL=AB3,ON=32;
179 /
180 .T43 <MOD FILEAUT:FILE=SJ.SECDATA,AR=NOAR;
181 /
182 <TRANS FILE:VSNR=SA1TAP,COPMOD=SSWF,FILE=SJ.SECDATA;
183 <SKIPCMD:LABEL=AB4,ON=32;
184 /
185 .T44 <TRANS FILE:VSNR=SA1TAP,COPMOD=SSWF,FILE=CG.;
186 <SKIPCMD:LABEL=AB5,ON=32;
187 /
188 .M5 <STEP;
189 //
190 // *************************************************
191 // * CREATING DISK/TAPE FALL BACK GENERATION ENDED *
192 // *************************************************
193 //
194 <REWIND MT:MTD=00;
195 /
196 .M6 <STEP;
197 //
198 // ****************************************************
199 // * DISPLAYING GENERATION STATUS AND LOG FILE STATUS *
200 // ****************************************************

MMN:SW-COFIP-122 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

Q12AP

201 //
202 <MOD FILEAUT:FILE=SJ.SECDATA,AR=NORD;
203 /
204 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
205 <DISP GEN:DISPL=LIST;
206 <DISP GEN:DISPL=FILES;
207 <STAT LOG;
208 <DISP FILE:FILE=LG.;
209 <DISP FILE:FILE=LQ.;
210 <DISP FILE:FILE=TLG.;
211 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
212 /
213 <SKIPCMD:LABEL=OUT;
214 / *******************************
215 / * FAULT EXITS AND END MESSAGE *
216 / *******************************
217 /
218 /
219 .AB1 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
220 // ****************
221 // *** FAULT 01 ***
222 // ****************
223 //
224 // ***************************************************
225 // *** LABELING GENERATIONS SAVE TAPE ***
226 // *** NOT EXECUTED. ***
227 // *** ***
228 // *** TAPE DEVICE IS OFFLINE OR DEFECTIVE OR ***
229 // *** TAPE IS DAMAGED: ***
230 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
231 // *** (IF NECESSARY FAULT CLEARANCE IS TO BE DONE ***
232 // *** ACCORDING TO MMN:CP113 PROCEDURE CP891.) ***
233 // *** ***
234 // *** START COMMAND FILE CG.SA.Q12AP AGAIN. ***
235 // ***************************************************
236 /
237 <SETCFOPT:OFF=1&3&&10,ON=2,SCOPE=GLOBAL;
238 <SKIPCMD:LABEL=END;
239 /
240 .AB2 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
241 // ****************
242 // *** FAULT 02 ***
243 // ****************
244 //
245 // ***************************************************
246 // *** CREATING FALL BACK GENERATION ON TAPE ***
247 // *** NOT EXECUTED. ***
248 // *** ***
249 // *** TAPE DEVICE IS OFFLINE OR DEFECTIVE OR ***
250 // *** CHECKSUM AUDIT ERROR OF ONE OR MORE ***

A30808-X3080-C485-5-7620 MMN:SW-COFIP-123
MMN:SW Maintenance
Software

Q12AP

251 // *** GENERATION FILE(S) DETECTED: ***

252 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
253 // *** ***
254 // *** (IF NECESSARY FAULT CLEARANCE IS TO BE DONE ***
255 // *** ACCORDING TO MMN:CP113 PROCEDURE CP891.) ***
256 // *** ******************************************* ***
257 // *** ***
258 // *** IF CONTINUATION TAPE HANDLING IS BEING ***
259 // *** PERFORMED AND ONE OF THE CONTINUATION TAPES ***
260 // *** IS BEING PROCESSED, THIS TAPE MUST BE ***
261 // *** UNLOADED AND THE START TAPE MUST BE ***
262 // *** MOUNTED IN THE MAGNETIC TAPE DEVICE AGAIN. ***
263 // *** ***
264 // *** IF THE TAPES ARE SUSPECT OF FAULTS, USE ***
265 // *** A NEW SET OF TAPES. ***
266 // *** ***
267 // *** (IF NECESSARY FAULT CLEARANCE IS TO BE DONE ***
268 // *** ACCORDING TO MMN:SW PROCEDURE SW500.) ***
269 // *** ******************************************* ***
270 // *** ***
271 // *** EVALUATE CHECKSUM AUDIT ERROR ALARM MASK, ***
272 // *** REPAIR FILE(S) IF NECESSARY. ***
273 // *** ***
274 // *** START COMMAND FILE CG.SA.Q12AP AGAIN. ***
275 // ***************************************************
276 /
277 <REWIND MT:MTD=00;
278 /
279 <SETCFOPT:OFF=1&3&&10,ON=2,SCOPE=GLOBAL;
280 <SKIPCMD:LABEL=END;
281 /
282 .AB3 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
283 // ****************
284 // *** FAULT 03 ***
285 // ****************
286 //
287 // *************************************************
288 // *** TRANSFERRING OF GENERATIONLESS FILES ***
289 // *** (FILE SY.MSGXREF) NOT EXECUTED. ***
290 // *** ***
291 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
292 // *** ***
293 // *** START COMMAND FILE CG.SA.Q12AP AGAIN. ***
294 // *************************************************
295 /
296 <SETCFOPT:OFF=1&2&4&&10,ON=3,SCOPE=GLOBAL;
297 <SKIPCMD:LABEL=END;
298 /
299 .AB4 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
300 // ****************

MMN:SW-COFIP-124 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

Q12AP

301 // *** FAULT 04 ***

302 // ****************
303 //
304 // *************************************************
305 // *** TRANSFERRING OF GENERATIONLESS FILES ***
306 // *** (FILE SJ.SECDATA) NOT EXECUTED. ***
307 // *** ***
308 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
309 // *** ***
310 // *** START COMMAND FILE CG.SA.Q12AP AGAIN. ***
311 // *************************************************
312 /
313 <SETCFOPT:OFF=1&&3&5&&10,ON=4,SCOPE=GLOBAL;
314 <SKIPCMD:LABEL=END;
315 /
316 .AB5 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
317 // ****************
318 // *** FAULT 05 ***
319 // ****************
320 //
321 // *************************************************
322 // *** TRANSFERRING OF GENERATIONLESS FILES ***
323 // *** (FILES CG.SA.*) NOT EXECUTED. ***
324 // *** ***
325 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
326 // *** ***
327 // *** START COMMAND FILE CG.SA.Q12AP AGAIN. ***
328 // *************************************************
329 /
330 <SETCFOPT:OFF=1&&4&6&&10,ON=5,SCOPE=GLOBAL;
331 <SKIPCMD:LABEL=END;
332 /
333 .OUT1 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
334 /
335 // ****************************
336 // *** FINISHED WITH FAULTS ***
337 // ****************************
338 //
339 // **********************************************************
340 // *** APS QUARTERLY SAVING (PART 2) HAS BEEN INTERRUPTED ***
341 // *** BECAUSE APS ROUTINE SAVING IS SCHEDULED. ***
342 // *** ***
343 // *** EXECUTE PROCEDURE SW210 FOR APS ROUTINE SAVING. ***
344 // **********************************************************
345 /
346 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
347 <SKIPCMD:LABEL=END;
348 /
349 .OUT <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
350 /

A30808-X3080-C485-5-7620 MMN:SW-COFIP-125
MMN:SW Maintenance
Software

Q12AP

351 // *******************************
352 // *** FINISHED WITHOUT FAULTS ***
353 // *******************************
354 //
355 // ************************************************
356 // *** APS QUARTERLY SAVING PART 2 IS FINISHED. ***
357 // ************************************************
358 /
359 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
360 <SKIPCMD:LABEL=END;
361 /
362 .END <SETCFOPT:ACKCFS=ERROR,DANCMD=NOEXEC,ACKREQ=NEG,SCOPE=GLOBAL;
363 <ENDFILE;

MMN:SW-COFIP-126 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

R11AP

1 <CMDFILE;
2 /
3 // 80-R11AP-05
4 /
5 /****V05***************************************************************
6 /* *
7 /* COMMAND FILE CG.SA.R11AP FOR APS ROUTINE SAVING ON TAPE *
8 /* ======================================================= *
9 /* *
10 /* TASK DESCRIPTION: *
11 /* ----------------- *
12 /* *
13 /* - CREATING FALL BACK GENERATION ON DISK *
14 /* - CREATING FIXPOINT GENERATION ON TAPE *
15 /* - TAPE SAVING LOG FILES *
16 /* *
17 /* FAULT HANDLING: *
18 /* --------------- *
19 /* - AFTER INTERRUPTION OF THE FILE PROCESSING VIA FAULT *
20 /* EXITS AND CORRESPONDING FAULT HANDLING THE FILE CAN *
21 /* BE STARTED AGAIN *
22 /* *
23 /* SWITCH PRESETTINGS FOR START POINTS AND ENTRY POINTS: *
24 /* ===================================================== *
25 /* START POINT SWITCH PRESETTINGS *
26 /* ----------- ------------------ *
27 /* RESETCFOPT; *
28 /* *
29 /* ENTRY POINT SWITCH PRESETTINGS *
30 /* ----------- ------------------ *
31 /* FAULT 02 SETCFOPT:OFF=1&2&4&&10,ON=3,SCOPE=GLOBAL; *
32 /* FAULT 03 SETCFOPT:OFF=1&&3&5&&10,ON=4,SCOPE=GLOBAL; *
33 /* FAULT 04 SETCFOPT:OFF=1&3&&10,ON=2,SCOPE=GLOBAL; *
34 /* FAULT 05 SETCFOPT:OFF=1&&5&7&&10,ON=6,SCOPE=GLOBAL; *
35 /* FAULT 06 SETCFOPT:OFF=1&&6&8&&10,ON=7,SCOPE=GLOBAL; *
36 /* FAULT 08 SETCFOPT:OFF=1&&7&9&10,ON=8,SCOPE=GLOBAL; *
37 /* FAULT 09 SETCFOPT:OFF=1&&8&10,ON=9,SCOPE=GLOBAL; *
38 /* FAULT 10 SETCFOPT:OFF=1&&9,ON=10,SCOPE=GLOBAL; *
39 /* FAULT 11 SETCFOPT:OFF=1&&8,ON=9&10,SCOPE=GLOBAL; *
40 /* FAULT 12 SETCFOPT:OFF=2&&10,ON=1,SCOPE=GLOBAL; *
41 /* FAULT 13 SETCFOPT:OFF=2&&8,ON=1&9&10,SCOPE=GLOBAL; *
42 /* *
43 /* AND: *
44 /* ---- *
45 /* *
46 /* B1 (1.ROUTINE) SETCFOPT:ON=11,SCOPE=GLOBAL; *
47 /* OR: *
48 /* B2 (2.ROUTINE) SETCFOPT:ON=12,SCOPE=GLOBAL; *
49 /* OR: *
50 /* B3 (3.ROUTINE) SETCFOPT:ON=13,SCOPE=GLOBAL; *

A30808-X3080-C485-5-7620 MMN:SW-COFIP-127
MMN:SW Maintenance
Software

R11AP

51 /* OR: *
52 /* B4 (4.ROUTINE) SETCFOPT:ON=14,SCOPE=GLOBAL; *
53 /* OR: *
54 /* B5 (5.ROUTINE) SETCFOPT:ON=15,SCOPE=GLOBAL; *
55 /* *
56 /**********************************************************************
57 /
58 <SETCFOPT:ACKCFS=ERROR,DANCMD=EXEC,ACKREQ=POS,SCOPE=GLOBAL;
59 /
60 <SKIPCMD:LABEL=B1,ON=11;
61 <SKIPCMD:LABEL=B2,ON=12;
62 <SKIPCMD:LABEL=B3,ON=13;
63 <SKIPCMD:LABEL=B4,ON=14;
64 <SKIPCMD:LABEL=B5,ON=15;
65 /
66 .M1 <STEP;
67 <DISP FILE:FILE=LG.;
68 <SKIPCMD:LABEL=OUT2,ON=32;
69 /
70 <DISP FILE:FILE=LG.LOG6.;
71 <SKIPCMD:LABEL=OUT1,OFF=32;
72 /
73 <DISP FILE:FILE=DUMMY.QAP;
74 <SKIPCMD:LABEL=OUT3,OFF=32;
75 /
76 .M2 <STEP;
77 /
78 //
79 // ****************************************************
80 // * DISPLAYING GENERATION STATUS AND LOG FILE STATUS *
81 // ****************************************************
82 /
83 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
84 <DISP GEN:DISPL=LIST;
85 <DISP GEN:DISPL=FILES;
86 <STAT LOG;
87 <DISP FILE:FILE=LG.;
88 <DISP FILE:FILE=LQ.;
89 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
90 /
91 .M3 <STEP;
92 <DACT FNS:FNS=LG;
93 /
94 <DISP FILE:FILE=LQ.;
95 <SKIPCMD:LABEL=M4,ON=32;
96 <DACT FNS:FNS=LQ;
97 /
98 .M4 <STEP;
99 <DISP FILE:FILE=LG.LOG1.;
100 <SKIPCMD:LABEL=M5,ON=32;

MMN:SW-COFIP-128 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

R11AP

101 /
102 //
103 // ***********************************************************
104 // * EXECUTION OF 1. ROUTINE SAVE WITHIN THE CURRENT QUARTER *
105 // ***********************************************************
106 /
107 <SETCFOPT:ON=11,SCOPE=GLOBAL;
108 /
109 <DISP FILE:FILE=TLG.LG.;
110 <SKIPCMD:LABEL=B11,ON=32;
111 <DEL FILE:FILE=TLG.LG.;
112 .B11 <DISP FILE:FILE=TLG.LQ.;
113 <SKIPCMD:LABEL=B1,ON=32;
114 <DEL FILE:FILE=TLG.LQ.;
115 /
116 .B1 <STEP;
117 /
118 <SKIPCMD:LABEL=T42,ON=2;
119 <SKIPCMD:LABEL=T42,ON=3;
120 <SKIPCMD:LABEL=T43,ON=4;
121 <SKIPCMD:LABEL=T45,ON=6;
122 <SKIPCMD:LABEL=M9,ON=7;
123 <SKIPCMD:LABEL=T431,ON=8;
124 <SKIPCMD:LABEL=T451,ON=9;
125 /
126 .T42 <STEP;
127 /
128 // **********************************
129 // * LABELING APS ROUTINE SAVE TAPE *
130 // **********************************
131 /
132 <INIT MT:VSN=LOGTAP,MTD=00,CD=EBC,DENS=6250;
133 <SKIPCMD:LABEL=AB2,ON=32;
134 /
135 .T43 <STEP;
136 <SKIPCMD:LABEL=T44,ON=2;
137 /
138 //
139 // *********************
140 // * CHANGING LOG FILE *
141 // *********************
142 /
143 <MOD LOGFILE:FILE=LOG2,SIZE=24,ERASE=YES;
144 <SKIPCMD:LABEL=AB3,ON=32;
145 /
146 .T431 <STEP;
147 /
148 //
149 // ***********************************
150 // * DISK SAVING OF CLOSED LOG FILES *

A30808-X3080-C485-5-7620 MMN:SW-COFIP-129
MMN:SW Maintenance
Software

R11AP

151 // ***********************************
152 /
153 <TRANS FILE:FILE=TLG.LG.LOG1./LG.LOG1.,MODE=CRD;
154 <SKIPCMD:LABEL=AB8,ON=32;
155 /
156 <DISP FILE:FILE=LQ.;
157 <SKIPCMD:LABEL=T44,ON=32;
158 <TRANS FILE:FILE=TLG.LQ.LOG1./LQ.LOG1.,MODE=CRD;
159 <SKIPCMD:LABEL=AB8,ON=32;
160 /
161 .T44 <STEP;
162 /
163 //
164 // ************************************************
165 // * CREATING GENERATION FIXPOINT ON TAPE STARTED *
166 // ************************************************
167 /
168 <COPY GEN:OUTPUT=FIX,VERIFY=YES,VSN=LOGTAP,REWIND=YES;
169 <SKIPCMD:LABEL=AB4,ON=32;
170 /
171 //
172 // **********************************************
173 // * CREATING GENERATION FIXPOINT ON TAPE ENDED *
174 // **********************************************
175 /
176 .T45 <STEP;
177 /
178 //
179 // **************************************
180 // * DISK TO TAPE TRANSFER OF LOG FILES *
181 // **************************************
182 /
183 <DISP FILE:FILE=LG.LOG1.;
184 <SKIPCMD:LABEL=T451,ON=32;
185 /
186 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LG.LOG1.;
187 <SKIPCMD:LABEL=AB5,ON=32;
188 <DEL FILE:FILE=LG.LOG1.;
189 /
190 <DISP FILE:FILE=LQ.;
191 <SKIPCMD:LABEL=T451C,ON=32;
192 /
193 <DISP FILE:FILE=LQ.LOG1.;
194 <SKIPCMD:LABEL=T451B,ON=32;
195 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LQ.LOG1.;
196 <SKIPCMD:LABEL=AB5,ON=32;
197 <DEL FILE:FILE=LQ.LOG1.;
198 /
199 <SKIPCMD:LABEL=T451C;
200 /

MMN:SW-COFIP-130 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

R11AP

201 .T451 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LG.LOG1.A0/TLG.LG.LOG1.A0;

202 <SKIPCMD:LABEL=AB9,ON=32;
203 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LG.LOG1.A1/TLG.LG.LOG1.A1;
204 <SKIPCMD:LABEL=AB9,ON=32;
205 <DISP FILE:FILE=LG.LOG1.A2;
206 <SKIPCMD:LABEL=T451A,ON=32;
207 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LG.LOG1.A2/TLG.LG.LOG1.A2;
208 <SKIPCMD:LABEL=AB9,ON=32;
209 <DISP FILE:FILE=LG.LOG1.A3;
210 <SKIPCMD:LABEL=T451A,ON=32;
211 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LG.LOG1.A3/TLG.LG.LOG1.A3;
212 <SKIPCMD:LABEL=AB9,ON=32;
213 /
214 .T451A <DISP FILE:FILE=LQ.;
215 <SKIPCMD:LABEL=T451C,ON=32;
216 /
217 <DISP FILE:FILE=LQ.LOG1.;
218 <SKIPCMD:LABEL=T451B,ON=32;
219 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LQ.LOG1.;
220 <SKIPCMD:LABEL=AB5,ON=32;
221 <DEL FILE:FILE=LQ.LOG1.;
222 <SKIPCMD:LABEL=T451C;
223 /
224 .T451B <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LQ.LOG1.A1/TLG.LQ.LOG1.A1;
225 <SKIPCMD:LABEL=AB9,ON=32;
226 <DISP FILE:FILE=LQ.LOG1.A2;
227 <SKIPCMD:LABEL=T451C,ON=32;
228 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LQ.LOG1.A2/TLG.LQ.LOG1.A2;
229 <SKIPCMD:LABEL=AB9,ON=32;
230 <DISP FILE:FILE=LQ.LOG1.A3;
231 <SKIPCMD:LABEL=T451C,ON=32;
232 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LQ.LOG1.A3/TLG.LQ.LOG1.A3;
233 <SKIPCMD:LABEL=AB9,ON=32;
234 /
235 .T451C <SKIPCMD:LABEL=M9;
236 /
237 .M5 <STEP;
238 <DISP FILE:FILE=LG.LOG2.;
239 <SKIPCMD:LABEL=M6,ON=32;
240 /
241 //
242 // ***********************************************************
243 // * EXECUTION OF 2. ROUTINE SAVE WITHIN THE CURRENT QUARTER *
244 // ***********************************************************
245 /
246 <SETCFOPT:ON=12,SCOPE=GLOBAL;
247 /
248 .B2 <STEP;
249 <SKIPCMD:LABEL=T52,ON=2;
250 <SKIPCMD:LABEL=T52,ON=3;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-131
MMN:SW Maintenance
Software

R11AP

251 <SKIPCMD:LABEL=T53,ON=4;
252 <SKIPCMD:LABEL=T55,ON=6;
253 <SKIPCMD:LABEL=M9,ON=7;
254 <SKIPCMD:LABEL=T531,ON=8;
255 <SKIPCMD:LABEL=T551,ON=9;
256 <SKIPCMD:LABEL=T553,ON=10;
257 /
258 .T51 <STEP;
259 /
260 //
261 // **************************************
262 // * TAPE TO DISK TRANSFER OF LOG FILES *
263 // **************************************
264 /
265 <TRANS FILE:VSNS=LOGTAP,COPMOD=CHAR,FILE=LG.;
266 <STEP;
267 <TRANS FILE:VSNS=LOGTAP,COPMOD=BIN,FILE=LQ.;
268 <STEP;
269 <REWIND MT:VSN=LOGTAP;
270 /
271 .T52 <STEP;
272 /
273 // **********************************
274 // * LABELING APS ROUTINE SAVE TAPE *
275 // **********************************
276 /
277 <INIT MT:VSN=LOGTAP,MTD=00,CD=EBC,DENS=6250;
278 <SKIPCMD:LABEL=AB2,ON=32;
279 /
280 .T53 <STEP;
281 <SKIPCMD:LABEL=T54,ON=2;
282 /
283 //
284 // *********************
285 // * CHANGING LOG FILE *
286 // *********************
287 /
288 <MOD LOGFILE:FILE=LOG3,SIZE=24,ERASE=YES;
289 <SKIPCMD:LABEL=AB3,ON=32;
290 /
291 .T531 <STEP;
292 /
293 //
294 // ***********************************
295 // * DISK SAVING OF CLOSED LOG FILES *
296 // ***********************************
297 /
298 <TRANS FILE:FILE=TLG.LG.LOG2./LG.LOG2.,MODE=CRD;
299 <SKIPCMD:LABEL=AB8,ON=32;
300 /

MMN:SW-COFIP-132 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

R11AP

301 <DISP FILE:FILE=LQ.;

302 <SKIPCMD:LABEL=T54,ON=32;
303 <TRANS FILE:FILE=TLG.LQ.LOG2./LQ.LOG2.,MODE=CRD;
304 <SKIPCMD:LABEL=AB8,ON=32;
305 /
306 .T54 <STEP;
307 /
308 //
309 // ************************************************
310 // * CREATING GENERATION FIXPOINT ON TAPE STARTED *
311 // ************************************************
312 /
313 <COPY GEN:OUTPUT=FIX,VERIFY=YES,VSN=LOGTAP,REWIND=YES;
314 <SKIPCMD:LABEL=AB4,ON=32;
315 /
316 //
317 // **********************************************
318 // * CREATING GENERATION FIXPOINT ON TAPE ENDED *
319 // **********************************************
320 /
321 .T55 <STEP;
322 /
323 //
324 // **************************************
325 // * DISK TO TAPE TRANSFER OF LOG FILES *
326 // **************************************
327 /
328 <DISP FILE:FILE=LG.LOG1.;
329 <SKIPCMD:LABEL=T551,ON=32;
330 /
331 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LG.LOG1.;
332 <SKIPCMD:LABEL=AB5,ON=32;
333 <DEL FILE:FILE=LG.LOG1.;
334 /
335 <DISP FILE:FILE=LQ.;
336 <SKIPCMD:LABEL=T552,ON=32;
337 /
338 <DISP FILE:FILE=LQ.LOG1.;
339 <SKIPCMD:LABEL=T551B,ON=32;
340 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LQ.LOG1.;
341 <SKIPCMD:LABEL=AB5,ON=32;
342 <DEL FILE:FILE=LQ.LOG1.;
343 <SKIPCMD:LABEL=T552;
344 /
345 .T551 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LG.LOG1.A0/TLG.LG.LOG1.A0;
346 <SKIPCMD:LABEL=AB9,ON=32;
347 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LG.LOG1.A1/TLG.LG.LOG1.A1;
348 <SKIPCMD:LABEL=AB9,ON=32;
349 <DISP FILE:FILE=LG.LOG1.A2;
350 <SKIPCMD:LABEL=T551A,ON=32;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-133
MMN:SW Maintenance
Software

R11AP

351 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LG.LOG1.A2/TLG.LG.LOG1.A2;

352 <SKIPCMD:LABEL=AB9,ON=32;
353 <DISP FILE:FILE=LG.LOG1.A3;
354 <SKIPCMD:LABEL=T551A,ON=32;
355 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LG.LOG1.A3/TLG.LG.LOG1.A3;
356 <SKIPCMD:LABEL=AB9,ON=32;
357 /
358 .T551A <DISP FILE:FILE=LQ.;
359 <SKIPCMD:LABEL=T552,ON=32;
360 /
361 <DISP FILE:FILE=LQ.LOG1.;
362 <SKIPCMD:LABEL=T551B,ON=32;
363 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LQ.LOG1.;
364 <SKIPCMD:LABEL=AB5,ON=32;
365 <DEL FILE:FILE=LQ.LOG1.;
366 <SKIPCMD:LABEL=T552;
367 /
368 .T551B <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LQ.LOG1.A1/TLG.LQ.LOG1.A1;
369 <SKIPCMD:LABEL=AB9,ON=32;
370 <DISP FILE:FILE=LQ.LOG1.A2;
371 <SKIPCMD:LABEL=T552,ON=32;
372 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LQ.LOG1.A2/TLG.LQ.LOG1.A2;
373 <SKIPCMD:LABEL=AB9,ON=32;
374 <DISP FILE:FILE=LQ.LOG1.A3;
375 <SKIPCMD:LABEL=T552,ON=32;
376 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LQ.LOG1.A3/TLG.LQ.LOG1.A3;
377 <SKIPCMD:LABEL=AB9,ON=32;
378 /
379 .T552 <DISP FILE:FILE=LG.LOG2.;
380 <SKIPCMD:LABEL=T553,ON=32;
381 /
382 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LG.LOG2.;
383 <SKIPCMD:LABEL=AB5,ON=32;
384 <DEL FILE:FILE=LG.LOG2.;
385 /
386 <DISP FILE:FILE=LQ.;
387 <SKIPCMD:LABEL=T553C,ON=32;
388 <DISP FILE:FILE=LQ.LOG2.;
389 <SKIPCMD:LABEL=T553B,ON=32;
390 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LQ.LOG2.;
391 <SKIPCMD:LABEL=AB5,ON=32;
392 <DEL FILE:FILE=LQ.LOG2.;
393 <SKIPCMD:LABEL=T553C;
394 /
395 .T553 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LG.LOG2.A0/TLG.LG.LOG2.A0;
396 <SKIPCMD:LABEL=AB10,ON=32;
397 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LG.LOG2.A1/TLG.LG.LOG2.A1;
398 <SKIPCMD:LABEL=AB10,ON=32;
399 <DISP FILE:FILE=LG.LOG2.A2;
400 <SKIPCMD:LABEL=T553A,ON=32;

MMN:SW-COFIP-134 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

R11AP

401 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LG.LOG2.A2/TLG.LG.LOG2.A2;

402 <SKIPCMD:LABEL=AB10,ON=32;
403 <DISP FILE:FILE=LG.LOG2.A3;
404 <SKIPCMD:LABEL=T553A,ON=32;
405 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LG.LOG2.A3/TLG.LG.LOG2.A3;
406 <SKIPCMD:LABEL=AB10,ON=32;
407 /
408 .T553A <DISP FILE:FILE=LQ.;
409 <SKIPCMD:LABEL=T553C,ON=32;
410 /
411 <DISP FILE:FILE=LQ.LOG2.;
412 <SKIPCMD:LABEL=T553B,ON=32;
413 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LQ.LOG2.;
414 <SKIPCMD:LABEL=AB5,ON=32;
415 <DEL FILE:FILE=LQ.LOG2.;
416 <SKIPCMD:LABEL=T553C,ON=32;
417 /
418 .T553B <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LQ.LOG2.A1/TLG.LQ.LOG2.A1;
419 <SKIPCMD:LABEL=AB10,ON=32;
420 <DISP FILE:FILE=LQ.LOG2.A2;
421 <SKIPCMD:LABEL=T553C,ON=32;
422 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LQ.LOG2.A2/TLG.LQ.LOG2.A2;
423 <SKIPCMD:LABEL=AB10,ON=32;
424 <DISP FILE:FILE=LQ.LOG2.A3;
425 <SKIPCMD:LABEL=T553C,ON=32;
426 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LQ.LOG2.A3/TLG.LQ.LOG2.A3;
427 <SKIPCMD:LABEL=AB10,ON=32;
428 /
429 .T553C <SKIPCMD:LABEL=M9;
430 /
431 .M6 <STEP;
432 <DISP FILE:FILE=LG.LOG3.;
433 <SKIPCMD:LABEL=M7,ON=32;
434 /
435 //
436 // ***********************************************************
437 // * EXECUTION OF 3. ROUTINE SAVE WITHIN THE CURRENT QUARTER *
438 // ***********************************************************
439 /
440 <SETCFOPT:ON=13,SCOPE=GLOBAL;
441 /
442 .B3 <STEP;
443 <SKIPCMD:LABEL=T62,ON=2;
444 <SKIPCMD:LABEL=T62,ON=3;
445 <SKIPCMD:LABEL=T63,ON=4;
446 <SKIPCMD:LABEL=T65,ON=6;
447 <SKIPCMD:LABEL=M9,ON=7;
448 <SKIPCMD:LABEL=T631,ON=8;
449 <SKIPCMD:LABEL=T655,ON=9&10;
450 <SKIPCMD:LABEL=T651,ON=9;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-135
MMN:SW Maintenance
Software

R11AP

451 <SKIPCMD:LABEL=T653,ON=10;
452 /
453 .T61 <STEP;
454 /
455 //
456 // **************************************
457 // * TAPE TO DISK TRANSFER OF LOG FILES *
458 // **************************************
459 /
460 <TRANS FILE:VSNS=LOGTAP,COPMOD=CHAR,FILE=LG.;
461 <STEP;
462 <TRANS FILE:VSNS=LOGTAP,COPMOD=BIN,FILE=LQ.;
463 <STEP;
464 <REWIND MT:VSN=LOGTAP;
465 /
466 .T62 <STEP;
467 /
468 // **********************************
469 // * LABELING APS ROUTINE SAVE TAPE *
470 // **********************************
471 /
472 <INIT MT:VSN=LOGTAP,MTD=00,CD=EBC,DENS=6250;
473 <SKIPCMD:LABEL=AB2,ON=32;
474 /
475 .T63 <STEP;
476 <SKIPCMD:LABEL=T64,ON=2;
477 /
478 //
479 // *********************
480 // * CHANGING LOG FILE *
481 // *********************
482 /
483 <MOD LOGFILE:FILE=LOG4,SIZE=24,ERASE=YES;
484 <SKIPCMD:LABEL=AB3,ON=32;
485 /
486 .T631 <STEP;
487 /
488 //
489 // ***********************************
490 // * DISK SAVING OF CLOSED LOG FILES *
491 // ***********************************
492 /
493 <TRANS FILE:FILE=TLG.LG.LOG3./LG.LOG3.,MODE=CRD;
494 <SKIPCMD:LABEL=AB8,ON=32;
495 /
496 <DISP FILE:FILE=LQ.;
497 <SKIPCMD:LABEL=T64,ON=32;
498 <TRANS FILE:FILE=TLG.LQ.LOG3./LQ.LOG3.,MODE=CRD;
499 <SKIPCMD:LABEL=AB8,ON=32;
500 /

MMN:SW-COFIP-136 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

R11AP

501 .T64 <STEP;

502 /
503 //
504 // ************************************************
505 // * CREATING GENERATION FIXPOINT ON TAPE STARTED *
506 // ************************************************
507 /
508 <COPY GEN:OUTPUT=FIX,VERIFY=YES,VSN=LOGTAP,REWIND=YES;
509 <SKIPCMD:LABEL=AB4,ON=32;
510 /
511 //
512 // **********************************************
513 // * CREATING GENERATION FIXPOINT ON TAPE ENDED *
514 // **********************************************
515 /
516 .T65 <STEP;
517 /
518 //
519 // **************************************
520 // * DISK TO TAPE TRANSFER OF LOG FILES *
521 // **************************************
522 /
523 <DISP FILE:FILE=LG.LOG1.;
524 <SKIPCMD:LABEL=T651,ON=32;
525 /
526 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LG.LOG1.;
527 <SKIPCMD:LABEL=AB5,ON=32;
528 <DEL FILE:FILE=LG.LOG1.;
529 /
530 <DISP FILE:FILE=LQ.;
531 <SKIPCMD:LABEL=T652,ON=32;
532 /
533 <DISP FILE:FILE=LQ.LOG1.;
534 <SKIPCMD:LABEL=T651B,ON=32;
535 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LQ.LOG1.;
536 <SKIPCMD:LABEL=AB5,ON=32;
537 <DEL FILE:FILE=LQ.LOG1.;
538 <SKIPCMD:LABEL=T652;
539 /
540 .T651 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LG.LOG1.A0/TLG.LG.LOG1.A0;
541 <SKIPCMD:LABEL=AB9,ON=32;
542 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LG.LOG1.A1/TLG.LG.LOG1.A1;
543 <SKIPCMD:LABEL=AB9,ON=32;
544 <DISP FILE:FILE=LG.LOG1.A2;
545 <SKIPCMD:LABEL=T651A,ON=32;
546 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LG.LOG1.A2/TLG.LG.LOG1.A2;
547 <SKIPCMD:LABEL=AB9,ON=32;
548 <DISP FILE:FILE=LG.LOG1.A3;
549 <SKIPCMD:LABEL=T651A,ON=32;
550 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LG.LOG1.A3/TLG.LG.LOG1.A3;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-137
MMN:SW Maintenance
Software

R11AP

551 <SKIPCMD:LABEL=AB9,ON=32;
552 /
553 .T651A <DISP FILE:FILE=LQ.;
554 <SKIPCMD:LABEL=T652,ON=32;
555 /
556 <DISP FILE:FILE=LQ.LOG1.;
557 <SKIPCMD:LABEL=T651B,ON=32;
558 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LQ.LOG1.;
559 <SKIPCMD:LABEL=AB5,ON=32;
560 <DEL FILE:FILE=LQ.LOG1.;
561 <SKIPCMD:LABEL=T652;
562 /
563 .T651B <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LQ.LOG1.A1/TLG.LQ.LOG1.A1;
564 <SKIPCMD:LABEL=AB9,ON=32;
565 <DISP FILE:FILE=LQ.LOG1.A2;
566 <SKIPCMD:LABEL=T652,ON=32;
567 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LQ.LOG1.A2/TLG.LQ.LOG1.A2;
568 <SKIPCMD:LABEL=AB9,ON=32;
569 <DISP FILE:FILE=LQ.LOG1.A3;
570 <SKIPCMD:LABEL=T652,ON=32;
571 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LQ.LOG1.A3/TLG.LQ.LOG1.A3;
572 <SKIPCMD:LABEL=AB9,ON=32;
573 /
574 .T652 <DISP FILE:FILE=LG.LOG2.;
575 <SKIPCMD:LABEL=T653,ON=32;
576 /
577 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LG.LOG2.;
578 <SKIPCMD:LABEL=AB5,ON=32;
579 <DEL FILE:FILE=LG.LOG2.;
580 /
581 <DISP FILE:FILE=LQ.;
582 <SKIPCMD:LABEL=T654,ON=32;
583 <DISP FILE:FILE=LQ.LOG2.;
584 <SKIPCMD:LABEL=T653B,ON=32;
585 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LQ.LOG2.;
586 <SKIPCMD:LABEL=AB5,ON=32;
587 <DEL FILE:FILE=LQ.LOG2.;
588 <SKIPCMD:LABEL=T654;
589 /
590 .T653 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LG.LOG2.A0/TLG.LG.LOG2.A0;
591 <SKIPCMD:LABEL=AB10,ON=32;
592 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LG.LOG2.A1/TLG.LG.LOG2.A1;
593 <SKIPCMD:LABEL=AB10,ON=32;
594 <DISP FILE:FILE=LG.LOG2.A2;
595 <SKIPCMD:LABEL=T653A,ON=32;
596 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LG.LOG2.A2/TLG.LG.LOG2.A2;
597 <SKIPCMD:LABEL=AB10,ON=32;
598 <DISP FILE:FILE=LG.LOG2.A3;
599 <SKIPCMD:LABEL=T653A,ON=32;
600 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LG.LOG2.A3/TLG.LG.LOG2.A3;

MMN:SW-COFIP-138 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

R11AP

601 <SKIPCMD:LABEL=AB10,ON=32;
602 /
603 .T653A <DISP FILE:FILE=LQ.;
604 <SKIPCMD:LABEL=T654,ON=32;
605 /
606 <DISP FILE:FILE=LQ.LOG2.;
607 <SKIPCMD:LABEL=T653B,ON=32;
608 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LQ.LOG2.;
609 <SKIPCMD:LABEL=AB5,ON=32;
610 <DEL FILE:FILE=LQ.LOG2.;
611 <SKIPCMD:LABEL=T654;
612 /
613 .T653B <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LQ.LOG2.A1/TLG.LQ.LOG2.A1;
614 <SKIPCMD:LABEL=AB10,ON=32;
615 <DISP FILE:FILE=LQ.LOG2.A2;
616 <SKIPCMD:LABEL=T654,ON=32;
617 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LQ.LOG2.A2/TLG.LQ.LOG2.A2;
618 <SKIPCMD:LABEL=AB10,ON=32;
619 <DISP FILE:FILE=LQ.LOG2.A3;
620 <SKIPCMD:LABEL=T654,ON=32;
621 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LQ.LOG2.A3/TLG.LQ.LOG2.A3;
622 <SKIPCMD:LABEL=AB10,ON=32;
623 /
624 .T654 <DISP FILE:FILE=LG.LOG3.;
625 <SKIPCMD:LABEL=T655,ON=32;
626 /
627 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LG.LOG3.;
628 <SKIPCMD:LABEL=AB5,ON=32;
629 <DEL FILE:FILE=LG.LOG3.;
630 /
631 <DISP FILE:FILE=LQ.;
632 <SKIPCMD:LABEL=T655C,ON=32;
633 <DISP FILE:FILE=LQ.LOG3.;
634 <SKIPCMD:LABEL=T655B,ON=32;
635 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LQ.LOG3.;
636 <SKIPCMD:LABEL=AB5,ON=32;
637 <DEL FILE:FILE=LQ.LOG3.;
638 <SKIPCMD:LABEL=T655C;
639 /
640 .T655 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LG.LOG3.A0/TLG.LG.LOG3.A0;
641 <SKIPCMD:LABEL=AB11,ON=32;
642 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LG.LOG3.A1/TLG.LG.LOG3.A1;
643 <SKIPCMD:LABEL=AB11,ON=32;
644 <DISP FILE:FILE=LG.LOG3.A2;
645 <SKIPCMD:LABEL=T655A,ON=32;
646 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LG.LOG3.A2/TLG.LG.LOG3.A2;
647 <SKIPCMD:LABEL=AB11,ON=32;
648 <DISP FILE:FILE=LG.LOG3.A3;
649 <SKIPCMD:LABEL=T655A,ON=32;
650 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LG.LOG3.A3/TLG.LG.LOG3.A3;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-139
MMN:SW Maintenance
Software

R11AP

651 <SKIPCMD:LABEL=AB11,ON=32;
652 /
653 .T655A <DISP FILE:FILE=LQ.;
654 <SKIPCMD:LABEL=T655C,ON=32;
655 /
656 <DISP FILE:FILE=LQ.LOG3.;
657 <SKIPCMD:LABEL=T655B,ON=32;
658 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LQ.LOG3.;
659 <SKIPCMD:LABEL=AB5,ON=32;
660 <DEL FILE:FILE=LQ.LOG3.;
661 <SKIPCMD:LABEL=T655C;
662 /
663 .T655B <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LQ.LOG3.A1/TLG.LQ.LOG3.A1;
664 <SKIPCMD:LABEL=AB11,ON=32;
665 <DISP FILE:FILE=LQ.LOG3.A2;
666 <SKIPCMD:LABEL=T655C,ON=32;
667 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LQ.LOG3.A2/TLG.LQ.LOG3.A2;
668 <SKIPCMD:LABEL=AB11,ON=32;
669 <DISP FILE:FILE=LQ.LOG3.A3;
670 <SKIPCMD:LABEL=T655C,ON=32;
671 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LQ.LOG3.A3/TLG.LQ.LOG3.A3;
672 <SKIPCMD:LABEL=AB11,ON=32;
673 /
674 .T655C <SKIPCMD:LABEL=M9;
675 /
676 .M7 <STEP;
677 <DISP FILE:FILE=LG.LOG4.;
678 <SKIPCMD:LABEL=M8,ON=32;
679 /
680 //
681 // ***********************************************************
682 // * EXECUTION OF 4. ROUTINE SAVE WITHIN THE CURRENT QUARTER *
683 // ***********************************************************
684 /
685 <SETCFOPT:ON=14,SCOPE=GLOBAL;
686 /
687 .B4 <STEP;
688 <SKIPCMD:LABEL=T72,ON=2;
689 <SKIPCMD:LABEL=T72,ON=3;
690 <SKIPCMD:LABEL=T73,ON=4;
691 <SKIPCMD:LABEL=T75,ON=6;
692 <SKIPCMD:LABEL=M9,ON=7;
693 <SKIPCMD:LABEL=T731,ON=8;
694 <SKIPCMD:LABEL=T755,ON=9&10;
695 <SKIPCMD:LABEL=T751,ON=9;
696 <SKIPCMD:LABEL=T753,ON=10;
697 <SKIPCMD:LABEL=T757,ON=1;
698 /
699 .T71 <STEP;
700 /

MMN:SW-COFIP-140 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

R11AP

701 //
702 // **************************************
703 // * TAPE TO DISK TRANSFER OF LOG FILES *
704 // **************************************
705 /
706 <TRANS FILE:VSNS=LOGTAP,COPMOD=CHAR,FILE=LG.;
707 <STEP;
708 <TRANS FILE:VSNS=LOGTAP,COPMOD=BIN,FILE=LQ.;
709 <STEP;
710 <REWIND MT:VSN=LOGTAP;
711 /
712 .T72 <STEP;
713 /
714 // **********************************
715 // * LABELING APS ROUTINE SAVE TAPE *
716 // **********************************
717 /
718 <INIT MT:VSN=LOGTAP,MTD=00,CD=EBC,DENS=6250;
719 <SKIPCMD:LABEL=AB2,ON=32;
720 /
721 .T73 <STEP;
722 <SKIPCMD:LABEL=T74,ON=2;
723 /
724 //
725 // *********************
726 // * CHANGING LOG FILE *
727 // *********************
728 /
729 <MOD LOGFILE:FILE=LOG5,SIZE=24,ERASE=YES;
730 <SKIPCMD:LABEL=AB3,ON=32;
731 /
732 .T731 <STEP;
733 /
734 //
735 // ***********************************
736 // * DISK SAVING OF CLOSED LOG FILES *
737 // ***********************************
738 /
739 <TRANS FILE:FILE=TLG.LG.LOG4./LG.LOG4.,MODE=CRD;
740 <SKIPCMD:LABEL=AB8,ON=32;
741 /
742 <DISP FILE:FILE=LQ.;
743 <SKIPCMD:LABEL=T74,ON=32;
744 <TRANS FILE:FILE=TLG.LQ.LOG4./LQ.LOG4.,MODE=CRD;
745 <SKIPCMD:LABEL=AB8,ON=32;
746 /
747 .T74 <STEP;
748 /
749 //
750 // ************************************************

A30808-X3080-C485-5-7620 MMN:SW-COFIP-141
MMN:SW Maintenance
Software

R11AP

751 // * CREATING GENERATION FIXPOINT ON TAPE STARTED *

752 // ************************************************
753 /
754 <COPY GEN:OUTPUT=FIX,VERIFY=YES,VSN=LOGTAP,REWIND=YES;
755 <SKIPCMD:LABEL=AB4,ON=32;
756 /
757 //
758 // **********************************************
759 // * CREATING GENERATION FIXPOINT ON TAPE ENDED *
760 // **********************************************
761 /
762 .T75 <STEP;
763 /
764 //
765 // **************************************
766 // * DISK TO TAPE TRANSFER OF LOG FILES *
767 // **************************************
768 /
769 <DISP FILE:FILE=LG.LOG1.;
770 <SKIPCMD:LABEL=T751,ON=32;
771 /
772 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LG.LOG1.;
773 <SKIPCMD:LABEL=AB5,ON=32;
774 <DEL FILE:FILE=LG.LOG1.;
775 /
776 <DISP FILE:FILE=LQ.;
777 <SKIPCMD:LABEL=T752,ON=32;
778 /
779 <DISP FILE:FILE=LQ.LOG1.;
780 <SKIPCMD:LABEL=T751B,ON=32;
781 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LQ.LOG1.;
782 <SKIPCMD:LABEL=AB5,ON=32;
783 <DEL FILE:FILE=LQ.LOG1.;
784 <SKIPCMD:LABEL=T752;
785 /
786 .T751 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LG.LOG1.A0/TLG.LG.LOG1.A0;
787 <SKIPCMD:LABEL=AB9,ON=32;
788 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LG.LOG1.A1/TLG.LG.LOG1.A1;
789 <SKIPCMD:LABEL=AB9,ON=32;
790 <DISP FILE:FILE=LG.LOG1.A2;
791 <SKIPCMD:LABEL=T751A,ON=32;
792 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LG.LOG1.A2/TLG.LG.LOG1.A2;
793 <SKIPCMD:LABEL=AB9,ON=32;
794 <DISP FILE:FILE=LG.LOG1.A3;
795 <SKIPCMD:LABEL=T751A,ON=32;
796 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LG.LOG1.A3/TLG.LG.LOG1.A3;
797 <SKIPCMD:LABEL=AB9,ON=32;
798 /
799 .T751A <DISP FILE:FILE=LQ.;
800 <SKIPCMD:LABEL=T752,ON=32;

MMN:SW-COFIP-142 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

R11AP

801 /
802 <DISP FILE:FILE=LQ.LOG1.;
803 <SKIPCMD:LABEL=T751B,ON=32;
804 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LQ.LOG1.;
805 <SKIPCMD:LABEL=AB5,ON=32;
806 <DEL FILE:FILE=LQ.LOG1.;
807 <SKIPCMD:LABEL=T752;
808 /
809 .T751B <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LQ.LOG1.A1/TLG.LQ.LOG1.A1;
810 <SKIPCMD:LABEL=AB9,ON=32;
811 <DISP FILE:FILE=LQ.LOG1.A2;
812 <SKIPCMD:LABEL=T752,ON=32;
813 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LQ.LOG1.A2/TLG.LQ.LOG1.A2;
814 <SKIPCMD:LABEL=AB9,ON=32;
815 <DISP FILE:FILE=LQ.LOG1.A3;
816 <SKIPCMD:LABEL=T752,ON=32;
817 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LQ.LOG1.A3/TLG.LQ.LOG1.A3;
818 <SKIPCMD:LABEL=AB9,ON=32;
819 /
820 .T752 <DISP FILE:FILE=LG.LOG2.;
821 <SKIPCMD:LABEL=T753,ON=32;
822 /
823 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LG.LOG2.;
824 <SKIPCMD:LABEL=AB5,ON=32;
825 <DEL FILE:FILE=LG.LOG2.;
826 /
827 <DISP FILE:FILE=LQ.;
828 <SKIPCMD:LABEL=T754,ON=32;
829 <DISP FILE:FILE=LQ.LOG2.;
830 <SKIPCMD:LABEL=T753B,ON=32;
831 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LQ.LOG2.;
832 <SKIPCMD:LABEL=AB5,ON=32;
833 <DEL FILE:FILE=LQ.LOG2.;
834 <SKIPCMD:LABEL=T754;
835 /
836 .T753 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LG.LOG2.A0/TLG.LG.LOG2.A0;
837 <SKIPCMD:LABEL=AB10,ON=32;
838 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LG.LOG2.A1/TLG.LG.LOG2.A1;
839 <SKIPCMD:LABEL=AB10,ON=32;
840 <DISP FILE:FILE=LG.LOG2.A2;
841 <SKIPCMD:LABEL=T753A,ON=32;
842 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LG.LOG2.A2/TLG.LG.LOG2.A2;
843 <SKIPCMD:LABEL=AB10,ON=32;
844 <DISP FILE:FILE=LG.LOG2.A3;
845 <SKIPCMD:LABEL=T753A,ON=32;
846 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LG.LOG2.A3/TLG.LG.LOG2.A3;
847 <SKIPCMD:LABEL=AB10,ON=32;
848 /
849 .T753A <DISP FILE:FILE=LQ.;
850 <SKIPCMD:LABEL=T754,ON=32;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-143
MMN:SW Maintenance
Software

R11AP

851 /
852 <DISP FILE:FILE=LQ.LOG2.;
853 <SKIPCMD:LABEL=T753B,ON=32;
854 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LQ.LOG2.;
855 <SKIPCMD:LABEL=AB5,ON=32;
856 <DEL FILE:FILE=LQ.LOG2.;
857 <SKIPCMD:LABEL=T754;
858 /
859 .T753B <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LQ.LOG2.A1/TLG.LQ.LOG2.A1;
860 <SKIPCMD:LABEL=AB10,ON=32;
861 <DISP FILE:FILE=LQ.LOG2.A2;
862 <SKIPCMD:LABEL=T754,ON=32;
863 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LQ.LOG2.A2/TLG.LQ.LOG2.A2;
864 <SKIPCMD:LABEL=AB10,ON=32;
865 <DISP FILE:FILE=LQ.LOG2.A3;
866 <SKIPCMD:LABEL=T754,ON=32;
867 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LQ.LOG2.A3/TLG.LQ.LOG2.A3;
868 <SKIPCMD:LABEL=AB10,ON=32;
869 /
870 .T754 <DISP FILE:FILE=LG.LOG3.;
871 <SKIPCMD:LABEL=T755,ON=32;
872 /
873 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LG.LOG3.;
874 <SKIPCMD:LABEL=AB5,ON=32;
875 <DEL FILE:FILE=LG.LOG3.;
876 /
877 <DISP FILE:FILE=LQ.;
878 <SKIPCMD:LABEL=T756,ON=32;
879 <DISP FILE:FILE=LQ.LOG3.;
880 <SKIPCMD:LABEL=T755B,ON=32;
881 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LQ.LOG3.;
882 <SKIPCMD:LABEL=AB5,ON=32;
883 <DEL FILE:FILE=LQ.LOG3.;
884 <SKIPCMD:LABEL=T756;
885 /
886 .T755 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LG.LOG3.A0/TLG.LG.LOG3.A0;
887 <SKIPCMD:LABEL=AB11,ON=32;
888 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LG.LOG3.A1/TLG.LG.LOG3.A1;
889 <SKIPCMD:LABEL=AB11,ON=32;
890 <DISP FILE:FILE=LG.LOG3.A2;
891 <SKIPCMD:LABEL=T755A,ON=32;
892 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LG.LOG3.A2/TLG.LG.LOG3.A2;
893 <SKIPCMD:LABEL=AB11,ON=32;
894 <DISP FILE:FILE=LG.LOG3.A3;
895 <SKIPCMD:LABEL=T755A,ON=32;
896 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LG.LOG3.A3/TLG.LG.LOG3.A3;
897 <SKIPCMD:LABEL=AB11,ON=32;
898 /
899 .T755A <DISP FILE:FILE=LQ.;
900 <SKIPCMD:LABEL=T756,ON=32;

MMN:SW-COFIP-144 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

R11AP

901 /
902 <DISP FILE:FILE=LQ.LOG3.;
903 <SKIPCMD:LABEL=T755B,ON=32;
904 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LQ.LOG3.;
905 <SKIPCMD:LABEL=AB5,ON=32;
906 <DEL FILE:FILE=LQ.LOG3.;
907 <SKIPCMD:LABEL=T756;
908 /
909 .T755B <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LQ.LOG3.A1/TLG.LQ.LOG3.A1;
910 <SKIPCMD:LABEL=AB11,ON=32;
911 <DISP FILE:FILE=LQ.LOG3.A2;
912 <SKIPCMD:LABEL=T756,ON=32;
913 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LQ.LOG3.A2/TLG.LQ.LOG3.A2;
914 <SKIPCMD:LABEL=AB11,ON=32;
915 <DISP FILE:FILE=LQ.LOG3.A3;
916 <SKIPCMD:LABEL=T756,ON=32;
917 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LQ.LOG3.A3/TLG.LQ.LOG3.A3;
918 <SKIPCMD:LABEL=AB11,ON=32;
919 /
920 .T756 <DISP FILE:FILE=LG.LOG4.;
921 <SKIPCMD:LABEL=T757,ON=32;
922 /
923 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LG.LOG4.;
924 <SKIPCMD:LABEL=AB5,ON=32;
925 <DEL FILE:FILE=LG.LOG4.;
926 /
927 <DISP FILE:FILE=LQ.;
928 <SKIPCMD:LABEL=T757C,ON=32;
929 <DISP FILE:FILE=LQ.LOG4.;
930 <SKIPCMD:LABEL=T757B,ON=32;
931 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LQ.LOG4.;
932 <SKIPCMD:LABEL=AB5,ON=32;
933 <DEL FILE:FILE=LQ.LOG4.;
934 <SKIPCMD:LABEL=T757C;
935 /
936 .T757 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LG.LOG4.A0/TLG.LG.LOG4.A0;
937 <SKIPCMD:LABEL=AB12,ON=32;
938 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LG.LOG4.A1/TLG.LG.LOG4.A1;
939 <SKIPCMD:LABEL=AB12,ON=32;
940 <DISP FILE:FILE=LG.LOG4.A2;
941 <SKIPCMD:LABEL=T757A,ON=32;
942 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LG.LOG4.A2/TLG.LG.LOG4.A2;
943 <SKIPCMD:LABEL=AB12,ON=32;
944 <DISP FILE:FILE=LG.LOG4.A3;
945 <SKIPCMD:LABEL=T757A,ON=32;
946 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LG.LOG4.A3/TLG.LG.LOG4.A3;
947 <SKIPCMD:LABEL=AB12,ON=32;
948 /
949 .T757A <DISP FILE:FILE=LQ.;
950 <SKIPCMD:LABEL=T757C,ON=32;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-145
MMN:SW Maintenance
Software

R11AP

951 /
952 <DISP FILE:FILE=LQ.LOG4.;
953 <SKIPCMD:LABEL=T757B,ON=32;
954 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LQ.LOG4.;
955 <SKIPCMD:LABEL=AB5,ON=32;
956 <DEL FILE:FILE=LQ.LOG4.;
957 <SKIPCMD:LABEL=T757C;
958 /
959 .T757B <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LQ.LOG4.A1/TLG.LQ.LOG4.A1;
960 <SKIPCMD:LABEL=AB12,ON=32;
961 <DISP FILE:FILE=LQ.LOG4.A2;
962 <SKIPCMD:LABEL=T757C,ON=32;
963 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LQ.LOG4.A2/TLG.LQ.LOG4.A2;
964 <SKIPCMD:LABEL=AB12,ON=32;
965 <DISP FILE:FILE=LQ.LOG4.A3;
966 <SKIPCMD:LABEL=T757C,ON=32;
967 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LQ.LOG4.A3/TLG.LQ.LOG4.A3;
968 <SKIPCMD:LABEL=AB12,ON=32;
969 /
970 .T757C <SKIPCMD:LABEL=M9;
971 /
972 .M8 <STEP;
973 <DISP FILE:FILE=LG.LOG5.;
974 <SKIPCMD:LABEL=M9,ON=32;
975 /
976 //
977 // ***********************************************************
978 // * EXECUTION OF 5. ROUTINE SAVE WITHIN THE CURRENT QUARTER *
979 // ***********************************************************
980 /
981 <SETCFOPT:ON=15,SCOPE=GLOBAL;
982 /
983 .B5 <STEP;
984 <SKIPCMD:LABEL=T82,ON=2;
985 <SKIPCMD:LABEL=T82,ON=3;
986 <SKIPCMD:LABEL=T83,ON=4;
987 <SKIPCMD:LABEL=T85,ON=6;
988 <SKIPCMD:LABEL=M9,ON=7;
989 <SKIPCMD:LABEL=T831,ON=8;
990 <SKIPCMD:LABEL=T859,ON=1&9&10;
991 <SKIPCMD:LABEL=T855,ON=9&10;
992 <SKIPCMD:LABEL=T851,ON=9;
993 <SKIPCMD:LABEL=T853,ON=10;
994 <SKIPCMD:LABEL=T857,ON=1;
995 /
996 .T81 <STEP;
997 /
998 //
999 // **************************************
1000 // * TAPE TO DISK TRANSFER OF LOG FILES *

MMN:SW-COFIP-146 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

R11AP

1001 // **************************************
1002 /
1003 <TRANS FILE:VSNS=LOGTAP,COPMOD=CHAR,FILE=LG.;
1004 <STEP;
1005 <TRANS FILE:VSNS=LOGTAP,COPMOD=BIN,FILE=LQ.;
1006 <STEP;
1007 <REWIND MT:VSN=LOGTAP;
1008 /
1009 .T82 <STEP;
1010 /
1011 // **********************************
1012 // * LABELING APS ROUTINE SAVE TAPE *
1013 // **********************************
1014 /
1015 <INIT MT:VSN=LOGTAP,MTD=00,CD=EBC,DENS=6250;
1016 <SKIPCMD:LABEL=AB2,ON=32;
1017 /
1018 .T83 <STEP;
1019 <SKIPCMD:LABEL=T84,ON=2;
1020 /
1021 //
1022 // *********************
1023 // * CHANGING LOG FILE *
1024 // *********************
1025 /
1026 <MOD LOGFILE:FILE=LOG6,SIZE=24,ERASE=YES;
1027 <SKIPCMD:LABEL=AB3,ON=32;
1028 /
1029 .T831 <STEP;
1030 /
1031 //
1032 // ***********************************
1033 // * DISK SAVING OF CLOSED LOG FILES *
1034 // ***********************************
1035 /
1036 <TRANS FILE:FILE=TLG.LG.LOG5./LG.LOG5.,MODE=CRD;
1037 <SKIPCMD:LABEL=AB8,ON=32;
1038 /
1039 <DISP FILE:FILE=LQ.;
1040 <SKIPCMD:LABEL=T84,ON=32;
1041 <TRANS FILE:FILE=TLG.LQ.LOG5./LQ.LOG5.,MODE=CRD;
1042 <SKIPCMD:LABEL=AB8,ON=32;
1043 /
1044 .T84 <STEP;
1045 /
1046 //
1047 // ************************************************
1048 // * CREATING GENERATION FIXPOINT ON TAPE STARTED *
1049 // ************************************************
1050 /

A30808-X3080-C485-5-7620 MMN:SW-COFIP-147
MMN:SW Maintenance
Software

R11AP

1051 <COPY GEN:OUTPUT=FIX,VERIFY=YES,VSN=LOGTAP,REWIND=YES;

1052 <SKIPCMD:LABEL=AB4,ON=32;
1053 /
1054 //
1055 // **********************************************
1056 // * CREATING GENERATION FIXPOINT ON TAPE ENDED *
1057 // **********************************************
1058 /
1059 .T85 <STEP;
1060 /
1061 //
1062 // **************************************
1063 // * DISK TO TAPE TRANSFER OF LOG FILES *
1064 // **************************************
1065 /
1066 <DISP FILE:FILE=LG.LOG1.;
1067 <SKIPCMD:LABEL=T851,ON=32;
1068 /
1069 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LG.LOG1.;
1070 <SKIPCMD:LABEL=AB5,ON=32;
1071 <DEL FILE:FILE=LG.LOG1.;
1072 /
1073 <DISP FILE:FILE=LQ.;
1074 <SKIPCMD:LABEL=T852,ON=32;
1075 /
1076 <DISP FILE:FILE=LQ.LOG1.;
1077 <SKIPCMD:LABEL=T851B,ON=32;
1078 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LQ.LOG1.;
1079 <SKIPCMD:LABEL=AB5,ON=32;
1080 <DEL FILE:FILE=LQ.LOG1.;
1081 <SKIPCMD:LABEL=T852;
1082 /
1083 .T851 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LG.LOG1.A0/TLG.LG.LOG1.A0;
1084 <SKIPCMD:LABEL=AB9,ON=32;
1085 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LG.LOG1.A1/TLG.LG.LOG1.A1;
1086 <SKIPCMD:LABEL=AB9,ON=32;
1087 <DISP FILE:FILE=LG.LOG1.A2;
1088 <SKIPCMD:LABEL=T851A,ON=32;
1089 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LG.LOG1.A2/TLG.LG.LOG1.A2;
1090 <SKIPCMD:LABEL=AB9,ON=32;
1091 <DISP FILE:FILE=LG.LOG1.A3;
1092 <SKIPCMD:LABEL=T851A,ON=32;
1093 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LG.LOG1.A3/TLG.LG.LOG1.A3;
1094 <SKIPCMD:LABEL=AB9,ON=32;
1095 /
1096 .T851A <DISP FILE:FILE=LQ.;
1097 <SKIPCMD:LABEL=T852,ON=32;
1098 /
1099 <DISP FILE:FILE=LQ.LOG1.;
1100 <SKIPCMD:LABEL=T851B,ON=32;

MMN:SW-COFIP-148 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

R11AP

1101 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LQ.LOG1.;

1102 <SKIPCMD:LABEL=AB5,ON=32;
1103 <DEL FILE:FILE=LQ.LOG1.;
1104 <SKIPCMD:LABEL=T852;
1105 /
1106 .T851B <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LQ.LOG1.A1/TLG.LQ.LOG1.A1;
1107 <SKIPCMD:LABEL=AB9,ON=32;
1108 <DISP FILE:FILE=LQ.LOG1.A2;
1109 <SKIPCMD:LABEL=T852,ON=32;
1110 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LQ.LOG1.A2/TLG.LQ.LOG1.A2;
1111 <SKIPCMD:LABEL=AB9,ON=32;
1112 <DISP FILE:FILE=LQ.LOG1.A3;
1113 <SKIPCMD:LABEL=T852,ON=32;
1114 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LQ.LOG1.A3/TLG.LQ.LOG1.A3;
1115 <SKIPCMD:LABEL=AB9,ON=32;
1116 /
1117 .T852 <DISP FILE:FILE=LG.LOG2.;
1118 <SKIPCMD:LABEL=T853,ON=32;
1119 /
1120 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LG.LOG2.;
1121 <SKIPCMD:LABEL=AB5,ON=32;
1122 <DEL FILE:FILE=LG.LOG2.;
1123 /
1124 <DISP FILE:FILE=LQ.;
1125 <SKIPCMD:LABEL=T854,ON=32;
1126 <DISP FILE:FILE=LQ.LOG2.;
1127 <SKIPCMD:LABEL=T853B,ON=32;
1128 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LQ.LOG2.;
1129 <SKIPCMD:LABEL=AB5,ON=32;
1130 <DEL FILE:FILE=LQ.LOG2.;
1131 <SKIPCMD:LABEL=T854;
1132 /
1133 .T853 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LG.LOG2.A0/TLG.LG.LOG2.A0;
1134 <SKIPCMD:LABEL=AB10,ON=32;
1135 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LG.LOG2.A1/TLG.LG.LOG2.A1;
1136 <SKIPCMD:LABEL=AB10,ON=32;
1137 <DISP FILE:FILE=LG.LOG2.A2;
1138 <SKIPCMD:LABEL=T853A,ON=32;
1139 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LG.LOG2.A2/TLG.LG.LOG2.A2;
1140 <SKIPCMD:LABEL=AB10,ON=32;
1141 <DISP FILE:FILE=LG.LOG2.A3;
1142 <SKIPCMD:LABEL=T853A,ON=32;
1143 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LG.LOG2.A3/TLG.LG.LOG2.A3;
1144 <SKIPCMD:LABEL=AB10,ON=32;
1145 /
1146 .T853A <DISP FILE:FILE=LQ.;
1147 <SKIPCMD:LABEL=T854,ON=32;
1148 /
1149 <DISP FILE:FILE=LQ.LOG2.;
1150 <SKIPCMD:LABEL=T853B,ON=32;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-149
MMN:SW Maintenance
Software

R11AP

1151 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LQ.LOG2.;

1152 <SKIPCMD:LABEL=AB5,ON=32;
1153 <DEL FILE:FILE=LQ.LOG2.;
1154 <SKIPCMD:LABEL=T854;
1155 /
1156 .T853B <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LQ.LOG2.A1/TLG.LQ.LOG2.A1;
1157 <SKIPCMD:LABEL=AB10,ON=32;
1158 <DISP FILE:FILE=LQ.LOG2.A2;
1159 <SKIPCMD:LABEL=T854,ON=32;
1160 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LQ.LOG2.A2/TLG.LQ.LOG2.A2;
1161 <SKIPCMD:LABEL=AB10,ON=32;
1162 <DISP FILE:FILE=LQ.LOG2.A3;
1163 <SKIPCMD:LABEL=T854,ON=32;
1164 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LQ.LOG2.A3/TLG.LQ.LOG2.A3;
1165 <SKIPCMD:LABEL=AB10,ON=32;
1166 /
1167 .T854 <DISP FILE:FILE=LG.LOG3.;
1168 <SKIPCMD:LABEL=T855,ON=32;
1169 /
1170 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LG.LOG3.;
1171 <SKIPCMD:LABEL=AB5,ON=32;
1172 <DEL FILE:FILE=LG.LOG3.;
1173 /
1174 <DISP FILE:FILE=LQ.;
1175 <SKIPCMD:LABEL=T856,ON=32;
1176 <DISP FILE:FILE=LQ.LOG3.;
1177 <SKIPCMD:LABEL=T855B,ON=32;
1178 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LQ.LOG3.;
1179 <SKIPCMD:LABEL=AB5,ON=32;
1180 <DEL FILE:FILE=LQ.LOG3.;
1181 <SKIPCMD:LABEL=T856;
1182 /
1183 .T855 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LG.LOG3.A0/TLG.LG.LOG3.A0;
1184 <SKIPCMD:LABEL=AB11,ON=32;
1185 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LG.LOG3.A1/TLG.LG.LOG3.A1;
1186 <SKIPCMD:LABEL=AB11,ON=32;
1187 <DISP FILE:FILE=LG.LOG3.A2;
1188 <SKIPCMD:LABEL=T855A,ON=32;
1189 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LG.LOG3.A2/TLG.LG.LOG3.A2;
1190 <SKIPCMD:LABEL=AB11,ON=32;
1191 <DISP FILE:FILE=LG.LOG3.A3;
1192 <SKIPCMD:LABEL=T855A,ON=32;
1193 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LG.LOG3.A3/TLG.LG.LOG3.A3;
1194 <SKIPCMD:LABEL=AB11,ON=32;
1195 /
1196 .T855A <DISP FILE:FILE=LQ.;
1197 <SKIPCMD:LABEL=T856,ON=32;
1198 /
1199 <DISP FILE:FILE=LQ.LOG3.;
1200 <SKIPCMD:LABEL=T855B,ON=32;

MMN:SW-COFIP-150 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

R11AP

1201 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LQ.LOG3.;

1202 <SKIPCMD:LABEL=AB5,ON=32;
1203 <DEL FILE:FILE=LQ.LOG3.;
1204 <SKIPCMD:LABEL=T856;
1205 /
1206 .T855B <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LQ.LOG3.A1/TLG.LQ.LOG3.A1;
1207 <SKIPCMD:LABEL=AB11,ON=32;
1208 <DISP FILE:FILE=LQ.LOG3.A2;
1209 <SKIPCMD:LABEL=T856,ON=32;
1210 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LQ.LOG3.A2/TLG.LQ.LOG3.A2;
1211 <SKIPCMD:LABEL=AB11,ON=32;
1212 <DISP FILE:FILE=LQ.LOG3.A3;
1213 <SKIPCMD:LABEL=T856,ON=32;
1214 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LQ.LOG3.A3/TLG.LQ.LOG3.A3;
1215 <SKIPCMD:LABEL=AB11,ON=32;
1216 /
1217 .T856 <DISP FILE:FILE=LG.LOG4.;
1218 <SKIPCMD:LABEL=T857,ON=32;
1219 /
1220 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LG.LOG4.;
1221 <SKIPCMD:LABEL=AB5,ON=32;
1222 <DEL FILE:FILE=LG.LOG4.;
1223 /
1224 <DISP FILE:FILE=LQ.;
1225 <SKIPCMD:LABEL=T858,ON=32;
1226 <DISP FILE:FILE=LQ.LOG4.;
1227 <SKIPCMD:LABEL=T857B,ON=32;
1228 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LQ.LOG4.;
1229 <SKIPCMD:LABEL=AB5,ON=32;
1230 <DEL FILE:FILE=LQ.LOG4.;
1231 <SKIPCMD:LABEL=T858;
1232 /
1233 .T857 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LG.LOG4.A0/TLG.LG.LOG4.A0;
1234 <SKIPCMD:LABEL=AB12,ON=32;
1235 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LG.LOG4.A1/TLG.LG.LOG4.A1;
1236 <SKIPCMD:LABEL=AB12,ON=32;
1237 <DISP FILE:FILE=LG.LOG4.A2;
1238 <SKIPCMD:LABEL=T857A,ON=32;
1239 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LG.LOG4.A2/TLG.LG.LOG4.A2;
1240 <SKIPCMD:LABEL=AB12,ON=32;
1241 <DISP FILE:FILE=LG.LOG4.A3;
1242 <SKIPCMD:LABEL=T857A,ON=32;
1243 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LG.LOG4.A3/TLG.LG.LOG4.A3;
1244 <SKIPCMD:LABEL=AB12,ON=32;
1245 /
1246 .T857A <DISP FILE:FILE=LQ.;
1247 <SKIPCMD:LABEL=T858,ON=32;
1248 /
1249 <DISP FILE:FILE=LQ.LOG4.;
1250 <SKIPCMD:LABEL=T857B,ON=32;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-151
MMN:SW Maintenance
Software

R11AP

1251 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LQ.LOG4.;

1252 <SKIPCMD:LABEL=AB5,ON=32;
1253 <DEL FILE:FILE=LQ.LOG4.;
1254 <SKIPCMD:LABEL=T858;
1255 /
1256 .T857B <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LQ.LOG4.A1/TLG.LQ.LOG4.A1;
1257 <SKIPCMD:LABEL=AB12,ON=32;
1258 <DISP FILE:FILE=LQ.LOG4.A2;
1259 <SKIPCMD:LABEL=T858,ON=32;
1260 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LQ.LOG4.A2/TLG.LQ.LOG4.A2;
1261 <SKIPCMD:LABEL=AB12,ON=32;
1262 <DISP FILE:FILE=LQ.LOG4.A3;
1263 <SKIPCMD:LABEL=T858,ON=32;
1264 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LQ.LOG4.A3/TLG.LQ.LOG4.A3;
1265 <SKIPCMD:LABEL=AB12,ON=32;
1266 /
1267 .T858 <DISP FILE:FILE=LG.LOG5.;
1268 <SKIPCMD:LABEL=T859,ON=32;
1269 /
1270 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LG.LOG5.;
1271 <SKIPCMD:LABEL=AB5,ON=32;
1272 <DEL FILE:FILE=LG.LOG5.;
1273 /
1274 <DISP FILE:FILE=LQ.;
1275 <SKIPCMD:LABEL=T859C,ON=32;
1276 <DISP FILE:FILE=LQ.LOG5.;
1277 <SKIPCMD:LABEL=T859B,ON=32;
1278 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LQ.LOG5.;
1279 <SKIPCMD:LABEL=AB5,ON=32;
1280 <DEL FILE:FILE=LQ.LOG5.;
1281 <SKIPCMD:LABEL=T859C;
1282 /
1283 .T859 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LG.LOG5.A0/TLG.LG.LOG5.A0;
1284 <SKIPCMD:LABEL=AB13,ON=32;
1285 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LG.LOG5.A1/TLG.LG.LOG5.A1;
1286 <SKIPCMD:LABEL=AB13,ON=32;
1287 <DISP FILE:FILE=LG.LOG5.A2;
1288 <SKIPCMD:LABEL=T859A,ON=32;
1289 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LG.LOG5.A2/TLG.LG.LOG5.A2;
1290 <SKIPCMD:LABEL=AB13,ON=32;
1291 <DISP FILE:FILE=LG.LOG5.A3;
1292 <SKIPCMD:LABEL=T859A,ON=32;
1293 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LG.LOG5.A3/TLG.LG.LOG5.A3;
1294 <SKIPCMD:LABEL=AB13,ON=32;
1295 /
1296 .T859A <DISP FILE:FILE=LQ.;
1297 <SKIPCMD:LABEL=T859C,ON=32;
1298 /
1299 <DISP FILE:FILE=LQ.LOG5.;
1300 <SKIPCMD:LABEL=T859B,ON=32;

MMN:SW-COFIP-152 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

R11AP

1301 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LQ.LOG5.;

1302 <SKIPCMD:LABEL=AB5,ON=32;
1303 <DEL FILE:FILE=LQ.LOG5.;
1304 <SKIPCMD:LABEL=T859C;
1305 /
1306 .T859B <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LQ.LOG5.A1/TLG.LQ.LOG5.A1;
1307 <SKIPCMD:LABEL=AB13,ON=32;
1308 <DISP FILE:FILE=LQ.LOG5.A2;
1309 <SKIPCMD:LABEL=T859C,ON=32;
1310 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LQ.LOG5.A2/TLG.LQ.LOG5.A2;
1311 <SKIPCMD:LABEL=AB13,ON=32;
1312 <DISP FILE:FILE=LQ.LOG5.A3;
1313 <SKIPCMD:LABEL=T859C,ON=32;
1314 <TRANS FILE:VSNR=LOGTAP,COPMOD=SSWF,FILE=LQ.LOG5.A3/TLG.LQ.LOG5.A3;
1315 <SKIPCMD:LABEL=AB13,ON=32;
1316 /
1317 .T859C <SKIPCMD:LABEL=M9;
1318 /
1319 .M9 <STEP;
1320 <REWIND MT:VSN=LOGTAP;
1321 /
1322 //
1323 // *************************************************
1324 // * CREATING FALL BACK GENERATION ON DISK STARTED *
1325 // *************************************************
1326 /
1327 <COPY GEN:OUTPUT=GEN,VERIFY=YES,VSN=SYSVSN;
1328 <SKIPCMD:LABEL=AB6,ON=32;
1329 /
1330 //
1331 // ***********************************************
1332 // * CREATING FALL BACK GENERATION ON DISK ENDED *
1333 // ***********************************************
1334 /
1335 .MA <STEP;
1336 <ACT FNS:FNS=LG;
1337 /
1338 <DISP FILE:FILE=LQ.;
1339 <SKIPCMD:LABEL=MB,ON=32;
1340 <ACT FNS:FNS=LQ;
1341 /
1342 .MB <STEP;
1343 /
1344 //
1345 // ****************************************************
1346 // * DISPLAYING GENERATION STATUS AND LOG FILE STATUS *
1347 // ****************************************************
1348 /
1349 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
1350 <DISP GEN:DISPL=LIST;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-153
MMN:SW Maintenance
Software

R11AP

1351 <DISP GEN:DISPL=FILES;

1352 <STAT LOG;
1353 <DISP FILE:FILE=LG.;
1354 <DISP FILE:FILE=LQ.;
1355 <DISP FILE:FILE=TLG.;
1356 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
1357 /
1358 <SKIPCMD:LABEL=TC6;
1359 /
1360 /
1361 /
1362 .TC6 <STEP;
1363 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
1364 //
1365 // ******************************************
1366 // * LISTING APS ROUTINE SAVE TAPE CONTENTS *
1367 // ******************************************
1368 //
1369 <DISP GEN:VSN=LOGTAP;
1370 <DISP FILE:VSN=LOGTAP;
1371 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
1372 /
1373 <SKIPCMD:LABEL=OUT;
1374 /
1375 / *******************************
1376 / * FAULT EXITS AND END MESSAGE *
1377 / *******************************
1378 /
1379 .AB2 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
1380 // ****************
1381 // *** FAULT 02 ***
1382 // ****************
1383 //
1384 // **************************************************
1385 // *** LABELING APS ROUTINE SAVE TAPE ***
1386 // *** NOT EXECUTED. ***
1387 // *** ***
1388 // *** TAPE STATION IS DEFECTIVE OR ............. ***
1389 // *** TAPE IS DAMAGED: ***
1390 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
1391 // *** ***
1392 // *** START COMMAND FILE CG.SA.R11AP AGAIN. ***
1393 // **************************************************
1394 /
1395 <REWIND MT:VSN=LOGTAP;
1396 /
1397 <SETCFOPT:OFF=1&2&4&&10,ON=3,SCOPE=GLOBAL;
1398 <SKIPCMD:LABEL=END;
1399 /
1400 .AB3 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;

MMN:SW-COFIP-154 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

R11AP

1401 // ****************
1402 // *** FAULT 03 ***
1403 // ****************
1404 //
1405 // **********************************************
1406 // *** CHANGING LOG FILE NOT EXECUTED. ***
1407 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
1408 // *** ***
1409 // *** START COMMAND FILE CG.SA.R11AP AGAIN. ***
1410 // **********************************************
1411 /
1412 <SETCFOPT:OFF=1&&3&5&&10,ON=4,SCOPE=GLOBAL;
1413 <SKIPCMD:LABEL=END;
1414 /
1415 .AB4 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
1416 // ****************
1417 // *** FAULT 04 ***
1418 // ****************
1419 //
1420 // *****************************************************
1421 // *** CREATING GENERATION FIXPOINT ON TAPE ***
1422 // *** NOT EXECUTED. ***
1423 // *** TAPE DEVICE IS OFFLINE OR DEFECTIV OR ***
1424 // *** TAPE IS DAMAGED OR FILES ARE NOT AVAILABLE OR ***
1425 // *** CHECKSUM AUDIT ERROR OF ONE OR MORE ***
1426 // *** GENERATION FILES DETECTED: ***
1427 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
1428 // *** ***
1429 // *** ***
1430 // *** (IF NECESSARY FAULT CLEARANCE IS TO BE DONE ***
1431 // *** ACCORDING TO MMN:SW PROCEDURE SW500.) ***
1432 // *** ******************************************* ***
1433 // *** ***
1434 // *** EVALUATE CHECKSUM AUDIT ERROR ALARM MASK, ***
1435 // *** REPAIR FILE(S) NECESSARY. ***
1436 // *** ***
1437 // *** START COMMAND FILE CG.SA.R11AP AGAIN. ***
1438 // *****************************************************
1439 /
1440 /
1441 <REWIND MT:VSN=LOGTAP;
1442 /
1443 <SETCFOPT:OFF=1&3&&10,ON=2,SCOPE=GLOBAL;
1444 <SKIPCMD:LABEL=END;
1445 /
1446 .AB5 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
1447 // ****************
1448 // *** FAULT 05 ***
1449 // ****************
1450 //

A30808-X3080-C485-5-7620 MMN:SW-COFIP-155
MMN:SW Maintenance
Software

R11AP

1451 // ***************************************************
1452 // *** DISK TO TAPE TRANSFER OF LOG FILES ***
1453 // *** NOT EXECUTED. ***
1454 // *** TAPE DEVICE IS OFFLINE OR DEFECTIVE OR ***
1455 // *** TAPE IS DAMAGED OR FILES ARE NOT AVAILABLE: ***
1456 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
1457 // *** ***
1458 // *** START COMMAND FILE CG.SA.R11AP AGAIN. ***
1459 // ***************************************************
1460 /
1461 /
1462 <DEL FILE:FILE=LG.LOG1.A0,VSN=LOGTAP;
1463 <STEP;
1464 <DEL FILE:FILE=LG.LOG1.A1,VSN=LOGTAP;
1465 <STEP;
1466 <DEL FILE:FILE=LG.LOG1.A2,VSN=LOGTAP;
1467 <STEP;
1468 <DEL FILE:FILE=LG.LOG1.A3,VSN=LOGTAP;
1469 <STEP;
1470 <DEL FILE:FILE=LQ.LOG1.A1,VSN=LOGTAP;
1471 <STEP;
1472 <DEL FILE:FILE=LQ.LOG1.A2,VSN=LOGTAP;
1473 <STEP;
1474 <DEL FILE:FILE=LQ.LOG1.A3,VSN=LOGTAP;
1475 <STEP;
1476 /
1477 <SETCFOPT:OFF=1&&5&7&&10,ON=6,SCOPE=GLOBAL;
1478 <SKIPCMD:LABEL=END;
1479 /
1480 .AB6 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
1481 // ****************
1482 // *** FAULT 06 ***
1483 // ****************
1484 //
1485 // ***************************************************
1486 // *** CREATING FALL BACK GENERATION ON DISK ***
1487 // *** NOT EXECUTED. ***
1488 // *** ***
1489 // *** POSSIBLY CHECKSUM AUDIT ERROR OF ONE OR ***
1490 // *** MORE GENERATION FILE(S) DETECTED: ***
1491 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
1492 // *** ***
1493 // *** (IF NECESSARY FAULT CLEARANCE IS TO BE DONE ***
1494 // *** ACCORDING TO MMN:SW PROCEDURE SW500.) ***
1495 // *** ******************************************* ***
1496 // *** ***
1497 // *** EVALUATE CHECKSUM AUDIT ERROR ALARM MASK, ***
1498 // *** REPAIR FILE(S) NECESSARY. ***
1499 // *** ***
1500 // *** START COMMAND FILE CG.SA.R11AP AGAIN. ***

MMN:SW-COFIP-156 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

R11AP

1501 // ***************************************************
1502 /
1503 /
1504 /
1505 <SETCFOPT:OFF=1&&6&8&&10,ON=7,SCOPE=GLOBAL;
1506 <SKIPCMD:LABEL=END;
1507 /
1508 .AB8 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
1509 // ****************
1510 // *** FAULT 08 ***
1511 // ****************
1512 //
1513 // **********************************************
1514 // *** DISK SAVING OF CLOSED LOG FILES ***
1515 // *** NOT EXECUTED. ***
1516 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
1517 // *** ***
1518 // *** START COMMAND FILE CG.SA.R11AP AGAIN. ***
1519 // **********************************************
1520 /
1521 /
1522 <SETCFOPT:OFF=1&&7&9&10,ON=8,SCOPE=GLOBAL;
1523 <SKIPCMD:LABEL=END;
1524 /
1525 .AB9 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
1526 // ****************
1527 // *** FAULT 09 ***
1528 // ****************
1529 //
1530 // **********************************************
1531 // *** DISK TO TAPE TRANSFER OF LOG1 FILES ***
1532 // *** NOT EXECUTED. ***
1533 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
1534 // *** ***
1535 // *** START COMMAND FILE CG.SA.R11AP AGAIN. ***
1536 // **********************************************
1537 /
1538 /
1539 <SETCFOPT:OFF=1&&8&10,ON=9,SCOPE=GLOBAL;
1540 <SKIPCMD:LABEL=END;
1541 /
1542 .AB10 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
1543 // ****************
1544 // *** FAULT 10 ***
1545 // ****************
1546 //
1547 // **********************************************
1548 // *** DISK TO TAPE TRANSFER OF LOG2 FILES ***
1549 // *** NOT EXECUTED. ***
1550 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***

A30808-X3080-C485-5-7620 MMN:SW-COFIP-157
MMN:SW Maintenance
Software

R11AP

1551 // *** ***

1552 // *** START COMMAND FILE CG.SA.R11AP AGAIN. ***
1553 // **********************************************
1554 /
1555 /
1556 <SETCFOPT:OFF=1&&9,ON=10,SCOPE=GLOBAL;
1557 <SKIPCMD:LABEL=END;
1558 /
1559 .AB11 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
1560 // ****************
1561 // *** FAULT 11 ***
1562 // ****************
1563 //
1564 // **********************************************
1565 // *** DISK TO TAPE TRANSFER OF LOG3 FILES ***
1566 // *** NOT EXECUTED. ***
1567 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
1568 // *** ***
1569 // *** START COMMAND FILE CG.SA.R11AP AGAIN. ***
1570 // **********************************************
1571 /
1572 /
1573 <SETCFOPT:OFF=1&&8,ON=9&10,SCOPE=GLOBAL;
1574 <SKIPCMD:LABEL=END;
1575 /
1576 .AB12 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
1577 // ****************
1578 // *** FAULT 12 ***
1579 // ****************
1580 //
1581 // **********************************************
1582 // *** DISK TO TAPE TRANSFER OF LOG4 FILES ***
1583 // *** NOT EXECUTED. ***
1584 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
1585 // *** ***
1586 // *** START COMMAND FILE CG.SA.R11AP AGAIN. ***
1587 // **********************************************
1588 /
1589 /
1590 <SETCFOPT:OFF=2&&10,ON=1,SCOPE=GLOBAL;
1591 <SKIPCMD:LABEL=END;
1592 /
1593 .AB13 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
1594 // ****************
1595 // *** FAULT 13 ***
1596 // ****************
1597 //
1598 // **********************************************
1599 // *** DISK TO TAPE TRANSFER OF LOG5 FILES ***
1600 // *** NOT EXECUTED. ***

MMN:SW-COFIP-158 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

R11AP

1601 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***

1602 // *** ***
1603 // *** START COMMAND FILE CG.SA.R11AP AGAIN. ***
1604 // **********************************************
1605 /
1606 /
1607 <SETCFOPT:OFF=2&&8,ON=1&9&10,SCOPE=GLOBAL;
1608 <SKIPCMD:LABEL=END;
1609 /
1610 .OUT <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
1611 /
1612 // ****************
1613 // *** FINISHED ***
1614 // ****************
1615 //
1616 // *****************************************************************
1617 // *** THE DISPLAYED TAPE CONTENTS IS TO BE COMPARED WITH THE ***
1618 // *** DESIRED CONTENTS (SEE SAVING SCHEDULE IN SW210). ***
1619 // *** AFTER THAT ONE HAS TO DECIDE WHETHER OR NOT THE ROUTINE ***
1620 // *** SAVING WAS SUCCESSFUL: ***
1621 // *** ***
1622 // *** ***
1623 // *** FAULT FREE: THE ACTUAL AND THE EXPECTED TAPE CONTENTS ***
1624 // *** =========== (AT THE TIME ROUTINE SAVING IS EXECUTED) ***
1625 // *** ARE IDENTICAL. ***
1626 // *** ***
1627 // *** ***
1628 // *** FAULTY: DEVIATIONS FROM THE EXPECTED TAPE CONTENTS: ***
1629 // *** ======= ***
1630 // *** ***
1631 // *** 1. THE WHOLE TAPE CONTENTS OR THE FIXPOINT IS DESTROYED:***
1632 // *** ------------------------------------------------------- ***
1633 // *** ***
1634 // *** MEASURES: ***
1635 // *** ***
1636 // *** - UNMOUNT TAPE AND MARK AS DEFECTIVE. ***
1637 // *** - MOUNT A NEW AND TESTED TAPE AND INITIALIZE AS LOGTAP: ***
1638 // *** ***
1639 // *** INIT MT:MTD=00,CD=EBC,DENS=6250,VSN=LOGTAP; ***
1640 // *** ***
1641 // *** - THE NEXT ROUTINE OR QUARTERLY SAVING ACCORDING TO THE ***
1642 // *** SAVING SCHEDULE IS TO BE CARRIED OUT IMMEDIATELY. ***
1643 // *** ***
1644 // *** 2. LOG FILE(S) ARE FAULTY OR MISSING: ***
1645 // *** ------------------------------------- ***
1646 // *** ***
1647 // *** MEASURES: ***
1648 // *** ***
1649 // *** TRANSFER ALL MISSING LOG FILES FROM DISK TO LOGTAP ***
1650 // *** (RENAME TLG.LG(LQ). FILES ON DISK INTO THE ***

A30808-X3080-C485-5-7620 MMN:SW-COFIP-159
MMN:SW Maintenance
Software

R11AP

1651 // *** CORRESPONDING LG(LQ). FILES ON TAPE): ***

1652 // *** ***
1653 // *** TRANS FILE:FILE=LG(LQ).LOGx.Ax/TLG.LG(LQ).LOGx.Ax, ***
1654 // *** VSNR=LOGTAP,COPMOD=SSWF; ***
1655 // *** ***
1656 // *** NOTE: ***
1657 // *** ----- ***
1658 // *** IF, AFTER REPAIRING THE TAPE CONTENTS, NEW PROBLEMS ***
1659 // *** OCCUR WITH THAT TAPE, THE MEASURES DESCRIBED UNDER ***
1660 // *** POINT 1 ARE TO BE CARRIED OUT. ***
1661 // *** ***
1662 // *****************************************************************
1663 //
1664 // ***************************************
1665 // *** APS ROUTINE SAVING IS FINISHED. ***
1666 // ***************************************
1667 /
1668 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
1669 <SKIPCMD:LABEL=END;
1670 /
1671 .OUT1 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
1672 /
1673 // ****************************
1674 // *** FINISHED WITH FAULTS ***
1675 // ****************************
1676 //
1677 // *********************************************************
1678 // *** APS ROUTINE SAVING HAS BEEN INTERRUPTED BECAUSE ***
1679 // *** APS QUARTERLY SAVING IS SCHEDULED. ***
1680 // *** ***
1681 // *** EXECUTE PROCEDURE SW210 FOR APS ROUTINE SAVING. ***
1682 // *********************************************************
1683 /
1684 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
1685 <SKIPCMD:LABEL=END;
1686 /
1687 .OUT2 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
1688 /
1689 // ****************************
1690 // *** FINISHED WITH FAULTS ***
1691 // ****************************
1692 //
1693 // **********************************************
1694 // *** NO LOG FILE FOR ROUTINE SAVING EXISTS. ***
1695 // *** APS ROUTINE SAVING WAS INTERRUPTED. ***
1696 // **********************************************
1697 /
1698 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
1699 <SKIPCMD:LABEL=END;
1700 /

MMN:SW-COFIP-160 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

R11AP

1701 .OUT3 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;

1702 /
1703 // ****************************
1704 // *** FINISHED WITH FAULTS ***
1705 // ****************************
1706 //
1707 // *********************************************************
1708 // *** APS ROUTINE SAVING HAS BEEN INTERRUPTED BECAUSE ***
1709 // *** APS QUARTERLY SAVING PART 2 IS SCHEDULED. ***
1710 // *** ***
1711 // *** START COMMAND FILE CG.SA.Q12AP. ***
1712 // *********************************************************
1713 /
1714 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
1715 <SKIPCMD:LABEL=END;
1716 /
1717 .END <SETCFOPT:ACKCFS=ERROR,DANCMD=NOEXEC,ACKREQ=NEG,SCOPE=GLOBAL;
1718 <ENDFILE;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-161
MMN:SW Maintenance
Software

M21AP

1 <CMDFILE;
2 /
3 // 80-M21AP-05
4 /
5 /****V05***************************************************************
6 /* *
7 /* COMMAND FILE CG.SA.M21AP FOR METER ROUTINE SAVING ON MO *
8 /* ======================================================= *
9 /* *
10 /* TASK DESCRIPTION: *
11 /* ----------------- *
12 /* - SAVING LOGICAL METER FILES ON MO *
13 /* *
14 /* PURPOSE OF THE MO REGENERATION BACKUP FILES: *
15 /* -------------------------------------------- *
16 /* - REGENERATION OF METERS AFTER DETECTION OF *
17 /* IRREPARABLE COMPARATOR FAULTS BY THE TEST AND *
18 /* SAVE ROUTINES *
19 /* - MAKING THE METER VALUES OF THE LAST *
20 /* ROUTINE SAVE AVAILABLE FOR USE IN PROCEDURES *
21 /* EY151 AND EY190 *
22 /* *
23 /* HOLD MO READY/LOADING LOADMOD STATION: *
24 /* ---------------------------------- *
25 /* - A MOD (MAGNETO OPTICAL DISK) WITHOUT WRITE PROTECT *
26 /* IS TO BE HELD READY *
27 /* - BEFORE STARTING THE COMMAND FILE THE MOD STATION *
28 /* IS TO BE LOADED *
29 /* *
30 /* FAULT HANDLING: *
31 /* --------------- *
32 /* - AFTER INTERRUPTION OF THE FILE PROCESSING VIA FAULT *
33 /* EXITS AND CORRESPONDING FAULT HANDLING THE FILE CAN *
34 /* BE STARTED AGAIN *
35 /* *
36 /* SWITCH PRESETTINGS FOR START POINTS AND ENTRY POINTS: *
37 /* ===================================================== *
38 /* START POINT SWITCH PRESETTINGS *
39 /* ----------- ------------------ *
40 /* RESETCFOPT; *
41 /* *
42 /* ENTRY POINT SWITCH PRESETTINGS *
43 /* ----------- ------------------ *
44 /* M2 SETCFOPT:OFF=1&2&4&&9,ON=3,SCOPE=GLOBAL; *
45 /* M3 SETCFOPT:OFF=1&&3&5&&9,ON=4,SCOPE,=GLOBAL; *
46 /* T36 SETCFOPT:OFF=1&&4&6&&9,ON=5,SCOPE=GLOBAL; *
47 /* M4 SETCFOPT:OFF=1&&5&7&&9,ON=6,SCOPE=GLOBAL; *
48 /* *
49 /* FAULT 02 SETCFOPT:OFF=1&2&4&&9,ON=3,SCOPE=GLOBAL; *
50 /* FAULT 03 SETCFOPT:OFF=1&&3&5&&9,ON=4,SCOPE=GLOBAL; *

MMN:SW-COFIP-162 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

M21AP

51 /* FAULT 04 SETCFOPT:OFF=1&&4&6&&9,ON=5,SCOPE=GLOBAL; *
52 /* FAULT 05 SETCFOPT:OFF=1&&5&7&&9,ON=6,SCOPE=GLOBAL; *
53 /* *
54 /**********************************************************************
55 /
56 <SETCFOPT:ACKCFS=ERROR,DANCMD=EXEC,ACKREQ=POS,SCOPE=GLOBAL;
57 /
58 <SKIPCMD:LABEL=END,ON=1;
59 <SKIPCMD:LABEL=M2,ON=3;
60 <SKIPCMD:LABEL=M3,ON=4;
61 <SKIPCMD:LABEL=T36,ON=5;
62 <SKIPCMD:LABEL=M4,ON=6;
63 /
64 <SKIPCMD:LABEL=M2;
65 /
66 .M2 <STEP;
67 //
68 // ********************************************
69 // * PREPARATION FOR MO SAVING OF METER FILES *
70 // ********************************************
71 //
72 <RSET MO:VSN=LOGMOD;
73 <DISP FILE:FILE=DUMMY.MET;
74 <SKIPCMD:LABEL=T22,OFF=32;
75 /
76 .T21 <CR FILE:FILE=DUMMY.MET,SIZE=24,TYPE=DOUBLE;
77 <SKIPCMD:LABEL=T22;
78 /
79 .T22 <DISP FILE:FILE=DUMMY.MET,VSN=LOGMOD;
80 <SKIPCMD:LABEL=T24,ON=32;
81 /
82 .T23 <DEL FILE:FILE=DUMMY.MET,VSN=LOGMOD;
83 /
84 .T24 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=DUMMY.MET;
85 <SKIPCMD:LABEL=AB2,ON=32;
86 /
87 .M3 <STEP;
88 //
89 // *************************
90 // * DISK SAVING OF METERS *
91 // *************************
92 //
93 /
94 .T30 <DACT FNS:FNS=CA;
95 /
96 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
97 /
98 .T31 <DISP FILE:FILE=CA.SU.UCHA;
99 <SKIPCMD:LABEL=T32,ON=32;
100 <DISP FILE:FILE=OLD.CA.SU.UCHA;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-163
MMN:SW Maintenance
Software

M21AP

101 <SKIPCMD:LABEL=T311,ON=32;
102 <DEL FILE:FILE=OLD.CA.SU.UCHA;
103 .T311 <DISP FILE:FILE=TCA.CA.SU.UCHA;
104 <SKIPCMD:LABEL=T312,ON=32;
105 <CAT FILE:FILE=OLD.CA.SU.UCHA/TCA.CA.SU.UCHA;
106 /
107 .T312 <SAVE MET:TYPE=METSUB;
108 <SKIPCMD:LABEL=T32,OFF=32;
109 <DISP FILE:FILE=OLD.CA.SU.UCHA;
110 <SKIPCMD:LABEL=T313,ON=32;
111 <SAVE MET:TYPE=METSUB,REFILE=OLD.CA.SU.UCHA;
112 <SKIPCMD:LABEL=AB3,ON=32;
113 <SKIPCMD:LABEL=T32;
114 .T313 <SAVE MET:TYPE=METSUB,ZEROIN=YES;
115 <SKIPCMD:LABEL=AB3,ON=32;
116 /
117 .T32 <DISP FILE:FILE=CA.TR.UCHA;
118 <SKIPCMD:LABEL=T33,ON=32;
119 <DISP FILE:FILE=OLD.CA.TR.UCHA;
120 <SKIPCMD:LABEL=T321,ON=32;
121 <DEL FILE:FILE=OLD.CA.TR.UCHA;
122 .T321 <DISP FILE:FILE=TCA.CA.TR.UCHA;
123 <SKIPCMD:LABEL=T322,ON=32;
124 <CAT FILE:FILE=OLD.CA.TR.UCHA/TCA.CA.TR.UCHA;
125 /
126 .T322 <SAVE MET:TYPE=METTR;
127 <SKIPCMD:LABEL=T33,OFF=32;
128 <DISP FILE:FILE=OLD.CA.TR.UCHA;
129 <SKIPCMD:LABEL=T323,ON=32;
130 <SAVE MET:TYPE=METTR,REFILE=OLD.CA.TR.UCHA;
131 <SKIPCMD:LABEL=AB3,ON=32;
132 <SKIPCMD:LABEL=T33;
133 .T323 <SAVE MET:TYPE=METTR,ZEROIN=YES;
134 <SKIPCMD:LABEL=AB3,ON=32;
135 /
136 .T33 <DISP FILE:FILE=CA.ST.UCHA;
137 <SKIPCMD:LABEL=T34,ON=32;
138 <DISP FILE:FILE=OLD.CA.ST.UCHA;
139 <SKIPCMD:LABEL=T331,ON=32;
140 <DEL FILE:FILE=OLD.CA.ST.UCHA;
141 .T331 <DISP FILE:FILE=TCA.CA.ST.UCHA;
142 <SKIPCMD:LABEL=T332,ON=32;
143 <CAT FILE:FILE=OLD.CA.ST.UCHA/TCA.CA.ST.UCHA;
144 /
145 .T332 <SAVE MET:TYPE=METSTAT;
146 <SKIPCMD:LABEL=T34,OFF=32;
147 <DISP FILE:FILE=OLD.CA.ST.UCHA;
148 <SKIPCMD:LABEL=T333,ON=32;
149 <SAVE MET:TYPE=METSTAT,REFILE=OLD.CA.ST.UCHA;
150 <SKIPCMD:LABEL=AB3,ON=32;

MMN:SW-COFIP-164 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

M21AP

151 <SKIPCMD:LABEL=T34;
152 .T333 <SAVE MET:TYPE=METSTAT,ZEROIN=YES;
153 <SKIPCMD:LABEL=AB3,ON=32;
154 /
155 .T34 <DISP FILE:FILE=CA.TF.UCHA;
156 <SKIPCMD:LABEL=T35,ON=32;
157 <DISP FILE:FILE=OLD.CA.TF.UCHA;
158 <SKIPCMD:LABEL=T341,ON=32;
159 <DEL FILE:FILE=OLD.CA.TF.UCHA;
160 .T341 <DISP FILE:FILE=TCA.CA.TF.UCHA;
161 <SKIPCMD:LABEL=T342,ON=32;
162 <CAT FILE:FILE=OLD.CA.TF.UCHA/TCA.CA.TF.UCHA;
163 /
164 .T342 <SAVE MET:TYPE=METTFS;
165 <SKIPCMD:LABEL=T35,OFF=32;
166 <DISP FILE:FILE=OLD.CA.TF.UCHA;
167 <SKIPCMD:LABEL=T343,ON=32;
168 <SAVE MET:TYPE=METTFS,REFILE=OLD.CA.TF.UCHA;
169 <SKIPCMD:LABEL=AB3,ON=32;
170 <SKIPCMD:LABEL=T35;
171 .T343 <SAVE MET:TYPE=METTFS,ZEROIN=YES;
172 <SKIPCMD:LABEL=AB3,ON=32;
173 /
174 .T35 <DISP FILE:FILE=CA.IC.UCHA;
175 <SKIPCMD:LABEL=T36,ON=32;
176 <DISP FILE:FILE=OLD.CA.IC.UCHA;
177 <SKIPCMD:LABEL=T351,ON=32;
178 <DEL FILE:FILE=OLD.CA.IC.UCHA;
179 .T351 <DISP FILE:FILE=TCA.CA.IC.UCHA;
180 <SKIPCMD:LABEL=T36,ON=32;
181 <CAT FILE:FILE=OLD.CA.IC.UCHA/TCA.CA.IC.UCHA;
182 /
183 .T36 <STEP;
184 /
185 .T361 <DISP FILE:FILE=CA.SU.UCHA;
186 <SKIPCMD:LABEL=T362,ON=32;
187 <TRANS FILE:FILE=TCA.CA.SU.UCHA/CA.SU.UCHA,MODE=CRD;
188 <SKIPCMD:LABEL=AB4,ON=32;
189 /
190 .T362 <DISP FILE:FILE=CA.TR.UCHA;
191 <SKIPCMD:LABEL=T363,ON=32;
192 <TRANS FILE:FILE=TCA.CA.TR.UCHA/CA.TR.UCHA,MODE=CRD;
193 <SKIPCMD:LABEL=AB4,ON=32;
194 /
195 .T363 <DISP FILE:FILE=CA.ST.UCHA;
196 <SKIPCMD:LABEL=T364,ON=32;
197 <TRANS FILE:FILE=TCA.CA.ST.UCHA/CA.ST.UCHA,MODE=CRD;
198 <SKIPCMD:LABEL=AB4,ON=32;
199 /
200 .T364 <DISP FILE:FILE=CA.TF.UCHA;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-165
MMN:SW Maintenance
Software

M21AP

201 <SKIPCMD:LABEL=T365,ON=32;
202 <TRANS FILE:FILE=TCA.CA.TF.UCHA/CA.TF.UCHA,MODE=CRD;
203 <SKIPCMD:LABEL=AB4,ON=32;
204 /
205 .T365 <DISP FILE:FILE=CA.IC.UCHA;
206 <SKIPCMD:LABEL=T37,ON=32;
207 <MOD FILEAUT:FILE=CA.IC.UCHA,AR=NODEL&NOWR&NOCN;
208 <TRANS FILE:FILE=TCA.CA.IC.UCHA/CA.IC.UCHA,MODE=CRD;
209 <SKIPCMD:LABEL=AB4,ON=32;
210 /
211 .T37 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
212 /
213 .M4 <STEP;
214 //
215 // ************************************
216 // * MO SAVING OF METER FILES STARTED *
217 // ************************************
218 //
219 /
220 <DISP FILE:FILE=DUMMY.MET,VSN=LOGMOD;
221 <SKIPCMD:LABEL=T40,ON=32;
222 /
223 <DEL FILE:FILE=DUMMY.MET,VSN=LOGMOD;
224 /
225 .T40 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=DUMMY.MET;
226 <SKIPCMD:LABEL=AB5,ON=32;
227 /
228 .T41 <DISP FILE:FILE=CA.SU.UCHA;
229 <SKIPCMD:LABEL=T42,ON=32;
230 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=CA.SU.UCHA;
231 <SKIPCMD:LABEL=AB5,ON=32;
232 /
233 <DISP FILE:FILE=OLD.CA.SU.UCHA;
234 <SKIPCMD:LABEL=T42,ON=32;
235 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=OLD.CA.SU.UCHA;
236 <SKIPCMD:LABEL=AB5,ON=32;
237 /
238 .T42 <DISP FILE:FILE=CA.TR.UCHA;
239 <SKIPCMD:LABEL=T43,ON=32;
240 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=CA.TR.UCHA;
241 <SKIPCMD:LABEL=AB5,ON=32;
242 /
243 <DISP FILE:FILE=OLD.CA.TR.UCHA;
244 <SKIPCMD:LABEL=T43,ON=32;
245 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=OLD.CA.TR.UCHA;
246 <SKIPCMD:LABEL=AB5,ON=32;
247 /
248 .T43 <DISP FILE:FILE=CA.ST.UCHA;
249 <SKIPCMD:LABEL=T44,ON=32;
250 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=CA.ST.UCHA;

MMN:SW-COFIP-166 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

M21AP

251 <SKIPCMD:LABEL=AB5,ON=32;
252 /
253 <DISP FILE:FILE=OLD.CA.ST.UCHA;
254 <SKIPCMD:LABEL=T44,ON=32;
255 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=OLD.CA.ST.UCHA;
256 <SKIPCMD:LABEL=AB5,ON=32;
257 /
258 .T44 <DISP FILE:FILE=CA.TF.UCHA;
259 <SKIPCMD:LABEL=T45,ON=32;
260 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=CA.TF.UCHA;
261 <SKIPCMD:LABEL=AB5,ON=32;
262 /
263 <DISP FILE:FILE=OLD.CA.TF.UCHA;
264 <SKIPCMD:LABEL=T45,ON=32;
265 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=OLD.CA.TF.UCHA;
266 <SKIPCMD:LABEL=AB5,ON=32;
267 /
268 .T45 <DISP FILE:FILE=CA.IC.UCHA;
269 <SKIPCMD:LABEL=T46,ON=32;
270 <MOD FILEAUT:FILE=CA.IC.UCHA,AR=NODEL&NOWR&NOCN;
271 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=CA.IC.UCHA;
272 <SKIPCMD:LABEL=AB5,ON=32;
273 /
274 <DISP FILE:FILE=OLD.CA.IC.UCHA;
275 <SKIPCMD:LABEL=T46,ON=32;
276 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=OLD.CA.IC.UCHA;
277 <SKIPCMD:LABEL=AB5,ON=32;
278 /
279 .T46 <ACT FNS:FNS=CA;
280 /
281 .M5 <STEP;
282 //
283 // **********************************
284 // * MO SAVING OF METER FILES ENDED *
285 // **********************************
286 //
287 <RSET MO:VSN=LOGMOD;
288 /
289 <DEL FILE:FILE=DUMMY.MET;
290 <STEP;
291 /
292 <SKIPCMD:LABEL=M6;
293 /
294 .M6 <RSET MO:VSN=LOGMOD;
295 <DISP FILE:VSN=LOGMOD,FILE=SY.GENLIST;
296 <SKIPCMD:LABEL=T62,ON=32;
297 .T61 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
298 //
299 // ********************************
300 // * DISPLAYING METER MO CONTENTS *

A30808-X3080-C485-5-7620 MMN:SW-COFIP-167
MMN:SW Maintenance
Software

M21AP

301 // ********************************
302 //
303 <DISP GEN:VSN=LOGMOD;
304 <SKIPCMD:LABEL=OUT2,ON=32;
305 <DISP FILE:VSN=LOGMOD;
306 <SKIPCMD:LABEL=OUT1,ON=32;
307 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
308 <SKIPCMD:LABEL=M7;
309 .T62 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
310 //
311 // ********************************
312 // * DISPLAYING METER MO CONTENTS *
313 // ********************************
314 //
315 <DISP FILE:VSN=LOGMOD;
316 <SKIPCMD:LABEL=OUT1,ON=32;
317 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
318 /
319 .M7 <SKIPCMD:LABEL=OUT;
320 / *******************************
321 / * FAULT EXITS AND END MESSAGE *
322 / *******************************
323 /
324 /
325 .AB2 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
326 // ****************
327 // *** FAULT 02 ***
328 // ****************
329 //
330 // **********************************************************
331 // *** PREPARATION FOR MO SAVING METER FILES ***
332 // *** NOT EXECUTED. ***
333 // *** ***
334 // *** MOD STATION IS DEFECTIVE OR MO IS DAMAGED: ***
335 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
336 // *** ***
337 // *** (IF THE COMMAND FILE WAS STARTED WITH A TIME JOB,) ***
338 // *** (ENTER: SETCFOPT:OFF=1&2&4&&9,ON=3,SCOPE=GLOBAL; ) ***
339 // *** ***
340 // *** START COMMAND FILE CG.SA.M21AP AGAIN. ***
341 // **********************************************************
342 /
343 <RSET MO:VSN=LOGMOD;
344 /
345 <SETCFOPT:OFF=1&2&4&&9,ON=3,SCOPE=GLOBAL;
346 <SKIPCMD:LABEL=END;
347 /
348 .AB3 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
349 // ****************
350 // *** FAULT 03 ***

MMN:SW-COFIP-168 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

M21AP

351 // ****************
352 //
353 // **********************************************************
354 // *** DISK SAVING OF METERS NOT EXECUTED. ***
355 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
356 // *** ***
357 // *** (IF THE COMMAND FILE WAS STARTED WITH A TIME JOB,) ***
358 // *** (ENTER: SETCFOPT:OFF=1&&3&5&&9,ON=4,SCOPE=GLOBAL;) ***
359 // *** ***
360 // *** START COMMAND FILE CG.SA.M21AP AGAIN. ***
361 // **********************************************************
362 /
363 <ACT FNS:FNS=CA;
364 /
365 <SETCFOPT:OFF=1&&3&5&&9,ON=4,SCOPE=GLOBAL;
366 <SKIPCMD:LABEL=END;
367 /
368 .AB4 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
369 // ****************
370 // *** FAULT 04 ***
371 // ****************
372 //
373 // **********************************************************
374 // *** DISK SAVING OF TEMPORARY METER FILES ***
375 // *** NOT EXECUTED. ***
376 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
377 // *** ***
378 // *** (IF THE COMMAND FILE WAS STARTED WITH A TIME JOB,) ***
379 // *** (ENTER: SETCFOPT:OFF=1&&4&6&&9,ON=5,SCOPE=GLOBAL;) ***
380 // *** ***
381 // *** START COMMAND FILE CG.SA.M21AP AGAIN. ***
382 // **********************************************************
383 /
384 <ACT FNS:FNS=CA;
385 <DEL FILE:FILE=TCA.;
386 <STEP;
387 /
388 <SETCFOPT:OFF=1&&4&6&&9,ON=5,SCOPE=GLOBAL;
389 <SKIPCMD:LABEL=END;
390 /
391 .AB5 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
392 // ****************
393 // *** FAULT 05 ***
394 // ****************
395 //
396 // **********************************************************
397 // *** MO SAVING OF METER FILES NOT EXECUTED. ***
398 // *** ***
399 // *** MOD STATION IS DEFECTIVE OR MO IS DAMAGED: ***
400 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***

A30808-X3080-C485-5-7620 MMN:SW-COFIP-169
MMN:SW Maintenance
Software

M21AP

401 // *** ***

402 // *** (IF THE COMMAND FILE WAS STARTED WITH A TIME JOB,) ***
403 // *** (ENTER: SETCFOPT:OFF=1&&5&7&&9,ON=6,SCOPE=GLOBAL;) ***
404 // *** ***
405 // *** START COMMAND FILE CG.SA.M211AP AGAIN. ***
406 // **********************************************************
407 /
408 <ACT FNS:FNS=CA;
409 /
410 <SETCFOPT:OFF=1&&5&7&&9,ON=6,SCOPE=GLOBAL;
411 <SKIPCMD:LABEL=END;
412 /
413 .OUT <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
414 /
415 // ****************
416 // *** FINISHED ***
417 // ****************
418 //
419 //
420 // *****************************************************************
421 // *** THE DISPLAYED MO CONTENTS IS TO BE COMPARED WITH THE ***
422 // *** DESIRED CONTENTS (SEE SAVING SCHEDULE IN SW210). ***
423 // *** AFTER THAT ONE HAS TO DECIDE WHETHER OR NOT THE METER ***
424 // *** SAVING WAS SUCCESSFUL: ***
425 // *** ***
426 // *** ***
427 // *** FAULT FREE: THE ACTUAL AND THE EXPECTED MO CONTENTS ***
428 // *** =========== (AT THE TIME METER SAVING IS EXECUTED) ARE ***
429 // *** IDENTICAL. ***
430 // *** ***
431 // *** FAULTY: DEVIATIONS FROM THE EXPECTED MO CONTENTS: ***
432 // *** ======= ***
433 // *** ***
434 // *** 1. THE WHOLE MO CONTENTS OR THE FIXPOINT IS DESTROYED: ***
435 // *** ------------------------------------------------------ ***
436 // *** ***
437 // *** MEASURES: ***
438 // *** ***
439 // *** - UNMOUNT MO AND MARK AS DEFECTIVE. ***
440 // *** - MOUNT A NEW AND TESTED MO AND INITIALIZE AS LOGMOD: ***
441 // *** ***
442 // *** CONF MOD:MOD=00,OST=MBL; ***
443 // *** DIAG MOD:MOD=00,LABELMO=YES; ***
444 // *** CONF MOD:MOD=00,OST=ACT; ***
445 // *** ***
446 // *** INIT MO:MOD=00,CD=EBC,VSN=LOGMOD; ***
447 // *** ***
448 // *** - THE NEXT ROUTINE OR QUARTERLY SAVING ACCORDING TO THE ***
449 // *** SAVING SCHEDULE IS TO BE CARRIED OUT IMMEDIATELY. ***
450 // *** ***

MMN:SW-COFIP-170 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

M21AP

451 // *** 2. LOG FILE(S) ARE FAULTY OR MISSING: ***

452 // *** ------------------------------------- ***
453 // *** ***
454 // *** MEASURES: ***
455 // *** ***
456 // *** - DELETE FILE DUMMY.MET (IF EXISTING) FROM THE LOGMOD. ***
457 // *** - TRANSFER ALL MISSING LOG FILES FROM DISK TO LOGMOD ***
458 // *** (RENAME TLG.LG(LQ). FILES ON DISK INTO THE ***
459 // *** CORRESPONDING LG(LQ). FILES ON MO): ***
460 // *** ***
461 // *** TRANS FILE:FILE=LG(LQ).LOGx.Ax/TLG.LG(LQ).LOGx.Ax, ***
462 // *** VSNR=LOGMOD,COPMOD=SSWF; ***
463 // *** ***
464 // *** - AFTER THAT METER SAVING IS TO BE CARRIED OUT AGAIN. ***
465 // *** ***
466 // *** NOTE: ***
467 // *** ----- ***
468 // *** IF, AFTER REPAIRING THE MO CONTENTS, NEW PROBLEMS ***
469 // *** OCCUR WITH THAT MO, THE MEASURES DESCRIBED UNDER ***
470 // *** POINT 1 ARE TO BE CARRIED OUT. ***
471 // *** ***
472 // *** 3. METER FILE(S) FAULTY OR MISSING: ***
473 // *** ------------------------------------------------------ ***
474 // *** ***
475 // *** MEASURE: ***
476 // *** ***
477 // *** METER SAVING IS TO BE CARRIED OUT AGAIN. ***
478 // *** ***
479 // *** NOTE: ***
480 // *** ----- ***
481 // *** IF, AFTER REPAIRING THE MO CONTENTS, NEW PROBLEMS ***
482 // *** OCCUR WITH THAT MO, THE MEASURES DESCRIBED UNDER ***
483 // *** POINT 1 ARE TO BE CARRIED OUT. ***
484 // *****************************************************************
485 //
486 // *****************************************
487 // *** METER ROUTINE SAVING IS FINISHED. ***
488 // *****************************************
489 /
490 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
491 <SKIPCMD:LABEL=END;
492 /
493 .OUT1 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
494 /
495 // ****************************
496 // *** FINISHED WITH FAULTS ***
497 // ****************************
498 //
499 // **********************************************************
500 // *** NO FILES ON MO. ***

A30808-X3080-C485-5-7620 MMN:SW-COFIP-171
MMN:SW Maintenance
Software

M21AP

501 // *** ***

502 // *** MOD STATION IS DEFECTIVE OR MO IS DAMAGED: ***
503 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
504 // *** ***
505 // *** DISCARD THE MO. ***
506 // *** ***
507 // *** THE NEXT ROUTINE OR QUARTERLY SAVING ACCORDING TO ***
508 // *** THE SAVING SCHEDULE IS TO BE CARRIED OUT ***
509 // *** IMMEDIATELY. ***
510 // *** ***
511 // *** METER ROUTINE SAVING IS FINISHED. ***
512 // **********************************************************
513 /
514 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
515 <SKIPCMD:LABEL=END;
516 /
517 .OUT2 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
518 /
519 // ****************************
520 // *** FINISHED WITH FAULTS ***
521 // ****************************
522 //
523 // **********************************************************
524 // *** GENERATION FIXPOINT ON MO IS DESTROYED. ***
525 // *** ***
526 // *** MOD STATION IS DEFECTIVE OR MO IS DAMAGED: ***
527 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
528 // *** ***
529 // *** DISCARD THE MO. ***
530 // *** ***
531 // *** THE NEXT ROUTINE OR QUARTERLY SAVING ACCORDING TO ***
532 // *** THE SAVING SCHEDULE IS TO BE CARRIED OUT. ***
533 // *** ***
534 // *** METER ROUTINE SAVING IS FINISHED. ***
535 // **********************************************************
536 /
537 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
538 <SKIPCMD:LABEL=END;
539 /
540 .END <SETCFOPT:ACKCFS=ERROR,DANCMD=NOEXEC,ACKREQ=NEG,SCOPE=GLOBAL;
541 <ENDFILE;

MMN:SW-COFIP-172 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

Q21AP

1 <CMDFILE;
2 /
3 // 80-Q21AP-05
4 /
5 /****V05***************************************************************
6 /* *
7 /* COMMAND FILE CG.SA.Q21AP QUARTERLY SAVE OF APS ON MO (PART 1) *
8 /* ============================================================= *
9 /* *
10 /* TASK DESCRIPTION: *
11 /* ----------------- *
12 /* *
13 /* - PREPARATION FOR CREATING FALL BACK GENERATION *
14 /* - MO SAVING OF LOG FILES *
15 /* *
16 /* FAULT HANDLING: *
17 /* --------------- *
18 /* - AFTER INTERRUPTION OF THE FILE PROCESSING VIA FAULT *
19 /* EXITS AND CORRESPONDING FAULT HANDLING THE FILE CAN *
20 /* BE STARTED AGAIN *
21 /* *
22 /* SWITCH PRESETTINGS FOR START POINTS AND ENTRY POINTS: *
23 /* ===================================================== *
24 /* START POINT SWITCH PRESETTINGS *
25 /* ----------- ------------------ *
26 /* RESETCFOPT; *
27 /* *
28 /* ENTRY POINT SWITCH PRESETTINGS *
29 /* ----------- ------------------ *
30 /* M3 SETCFOPT:OFF=1&3&&10,ON=2,SCOPE=GLOBAL; *
31 /* M4 SETCFOPT:OFF=1&2&4&&10,ON=3,SCOPE=GLOBAL; *
32 /* M6 SETCFOPT:OFF=1&&3&5&&10,ON=4,SCOPE=GLOBAL; *
33 /* *
34 /* FAULT 01 SETCFOPT:OFF=1&3&&10,ON=2,SCOPE=GLOBAL; *
35 /* FAULT 02 SETCFOPT:OFF=1&2&4&&10,ON=3,SCOPE=GLOBAL; *
36 /* FAULT 03 SETCFOPT:OFF=1&&3&5&&10,ON=4,SCOPE=GLOBAL; *
37 /* *
38 /**********************************************************************
39 /
40 <SETCFOPT:ACKCFS=ERROR,DANCMD=EXEC,ACKREQ=POS,SCOPE=GLOBAL;
41 /
42 <SKIPCMD:LABEL=END,ON=1;
43 <SKIPCMD:LABEL=M3,ON=2;
44 <SKIPCMD:LABEL=M4,ON=3;
45 <SKIPCMD:LABEL=M6,ON=4;
46 /
47 .M1 <STEP;
48 <DISP FILE:FILE=LG.;
49 <SKIPCMD:LABEL=T11,ON=32;
50 <SKIPCMD:LABEL=T12;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-173
MMN:SW Maintenance
Software

Q21AP

51 /
52 .T11 <SETCFOPT:ON=16,SCOPE=GLOBAL;
53 <SKIPCMD:LABEL=M2;
54 /
55 .T12 <DISP FILE:FILE=LG.LOG6.;
56 <SKIPCMD:LABEL=OUT1,ON=32;
57 /
58 .M2 <STEP;
59 //
60 // ****************************************************
61 // * DISPLAYING GENERATION STATUS AND LOG FILE STATUS *
62 // ****************************************************
63 //
64 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
65 <DISP GEN:DISPL=LIST;
66 <DISP GEN:DISPL=FILES;
67 <STAT LOG;
68 <DISP FILE:FILE=LG.;
69 <DISP FILE:FILE=LQ.;
70 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
71 /
72 .T21 <DISP FILE:FILE=DUMMY.QAP;
73 <SKIPCMD:LABEL=M3,OFF=32;
74 <CR FILE:FILE=DUMMY.QAP,SIZE=24,TYPE=DOUBLE;
75 /
76 .M3 <STEP;
77 <SKIPCMD:LABEL=OUT2,ON=16;
78 //
79 // *********************
80 // * CHANGING LOG FILE *
81 // *********************
82 //
83 <MOD LOGFILE:FILE=LOG1,SIZE=24,ERASE=YES;
84 <SKIPCMD:LABEL=AB1,ON=32;
85 /
86 .T31 <DISP FILE:FILE=TLG.LG.LOG6.;
87 <SKIPCMD:LABEL=T32,ON=32;
88 <DEL FILE:FILE=TLG.LG.LOG6.;
89 .T32 <DISP FILE:FILE=TLG.LQ.LOG6.;
90 <SKIPCMD:LABEL=M4,ON=32;
91 <DEL FILE:FILE=TLG.LQ.LOG6.;
92 /
93 .M4 <STEP;
94 //
95 // ***********************************
96 // * DISK SAVING OF CLOSED LOG FILES *
97 // ***********************************
98 //
99 <TRANS FILE:FILE=TLG.LG.LOG6./LG.LOG6.,MODE=CRD;
100 <SKIPCMD:LABEL=AB2,ON=32;

MMN:SW-COFIP-174 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

Q21AP

101 /
102 <DISP FILE:FILE=LQ.;
103 <SKIPCMD:LABEL=T41,ON=32;
104 <TRANS FILE:FILE=TLG.LQ.LOG6./LQ.LOG6.,MODE=CRD;
105 <SKIPCMD:LABEL=AB2,ON=32;
106 /
107 .T41 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
108 <STAT LOG;
109 <DISP FILE:FILE=LG.;
110 <DISP FILE:FILE=LQ.;
111 <DISP FILE:FILE=TLG.;
112 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
113 /
114 .M5 <STEP;
115 /
116 <DISP FILE:FILE=DUMMY.MET,VSN=LOGMOD;
117 <SKIPCMD:LABEL=M6,ON=32;
118 /
119 //
120 // *******************************
121 // * DELETING CHARGE METER FILES *
122 // *******************************
123 /
124 <DEL FILE:FILE=DUMMY.MET,VSN=LOGMOD;
125 /
126 .M6 <STEP;
127 /
128 //
129 // ******************************
130 // * LOG FILE MO SAVING STARTED *
131 // ******************************
132 /
133 <DACT FNS:FNS=LG;
134 /
135 <DISP FILE:FILE=LQ.;
136 <SKIPCMD:LABEL=T61,ON=32;
137 <DACT FNS:FNS=LQ;
138 /
139 .T61 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LG.LOG6.A0;
140 <SKIPCMD:LABEL=AB3,ON=32;
141 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LG.LOG6.A1;
142 <SKIPCMD:LABEL=AB3,ON=32;
143 <DISP FILE:FILE=LG.LOG6.A2;
144 <SKIPCMD:LABEL=T62,ON=32;
145 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LG.LOG6.A2;
146 <SKIPCMD:LABEL=AB3,ON=32;
147 <DISP FILE:FILE=LG.LOG6.A3;
148 <SKIPCMD:LABEL=T62,ON=32;
149 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LG.LOG6.A3;
150 <SKIPCMD:LABEL=AB3,ON=32;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-175
MMN:SW Maintenance
Software

Q21AP

151 /
152 .T62 <DISP FILE:FILE=LQ.;
153 <SKIPCMD:LABEL=T64,ON=32;
154 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LQ.LOG6.A1;
155 <SKIPCMD:LABEL=AB3,ON=32;
156 <DISP FILE:FILE=LQ.LOG6.A2;
157 <SKIPCMD:LABEL=T63,ON=32;
158 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LQ.LOG6.A2;
159 <SKIPCMD:LABEL=AB3,ON=32;
160 <DISP FILE:FILE=LQ.LOG6.A3;
161 <SKIPCMD:LABEL=T63,ON=32;
162 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LQ.LOG6.A3;
163 <SKIPCMD:LABEL=AB3,ON=32;
164 /
165 .T63 <DEL FILE:FILE=LQ.LOG6.;
166 <ACT FNS:FNS=LQ;
167 /
168 .T64 <DEL FILE:FILE=LG.LOG6.;
169 <ACT FNS:FNS=LG;
170 /
171 .M7 <STEP;
172 /
173 //
174 // ****************************
175 // * LOG FILE MO SAVING ENDED *
176 // ****************************
177 /
178 <RSET MO:VSN=LOGMOD;
179 /
180 .M8 <STEP;
181 /
182 //
183 // *************************************
184 // * LISTING LOG FILE SAVE MO CONTENTS *
185 // *************************************
186 /
187 <DISP FILE:FILE=SY.GENLIST,VSN=LOGMOD;
188 <SKIPCMD:LABEL=T82,ON=32;
189 /
190 .T81 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
191 <DISP GEN:VSN=LOGMOD;
192 <DISP FILE:VSN=LOGMOD;
193 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
194 /
195 <SKIPCMD:LABEL=M9;
196 /
197 .T82 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
198 <DISP FILE:VSN=LOGMOD;
199 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
200 /

MMN:SW-COFIP-176 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

Q21AP

201 .M9 <STEP;

202 //
203 // ****************************************************
204 // * DISPLAYING GENERATION STATUS AND LOG FILE STATUS *
205 // ****************************************************
206 //
207 /
208 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
209 <DISP GEN:DISPL=LIST;
210 <DISP GEN:DISPL=FILES;
211 <STAT LOG;
212 <DISP FILE:FILE=LG.;
213 <DISP FILE:FILE=LQ.;
214 <DISP FILE:FILE=TLG.;
215 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
216 /
217 <SKIPCMD:LABEL=OUT2,ON=16;
218 <SKIPCMD:LABEL=OUT;
219 / *******************************
220 / * FAULT EXITS AND END MESSAGE *
221 / *******************************
222 /
223 .AB1 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
224 // ****************
225 // *** FAULT 01 ***
226 // ****************
227 //
228 // **********************************************
229 // *** CHANGING LOG FILE NOT EXECUTED. ***
230 // *** ***
231 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
232 // *** ***
233 // *** START COMMAND FILE CG.SA.Q21AP AGAIN. ***
234 // **********************************************
235 /
236 <SETCFOPT:OFF=1&3&&10,ON=2,SCOPE=GLOBAL;
237 <SKIPCMD:LABEL=END;
238 /
239 .AB2 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
240 // ****************
241 // *** FAULT 02 ***
242 // ****************
243 //
244 // **********************************************
245 // *** DISK SAVING OF CLOSED LOG FILES ***
246 // *** NOT EXECUTED. ***
247 // *** ***
248 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
249 // *** ***
250 // *** START COMMAND FILE CG.SA.Q21AP AGAIN. ***

A30808-X3080-C485-5-7620 MMN:SW-COFIP-177
MMN:SW Maintenance
Software

Q21AP

251 // **********************************************
252 /
253 <SETCFOPT:OFF=1&2&4&&10,ON=3,SCOPE=GLOBAL;
254 <SKIPCMD:LABEL=END;
255 /
256 .AB3 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
257 // ****************
258 // *** FAULT 03 ***
259 // ****************
260 //
261 // ***************************************************
262 // *** MO SAVING OF LOG FILES NOT EXECUTED. ***
263 // *** MOD STATION IS DEFECTIVE OR MO IS DAMAGED: ***
264 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
265 // *** ***
266 // *** START COMMAND FILE CG.SA.Q21AP AGAIN. ***
267 // ***************************************************
268 /
269 <ACT FNS:FNS=LG;
270 /
271 <DISP FILE:FILE=LQ.;
272 <SKIPCMD:LABEL=AB31,ON=32;
273 <ACT FNS:FNS=LQ;
274 /
275 .AB31 <RSET MO:VSN=LOGMOD;
276 /
277 <SETCFOPT:OFF=1&&3&5&&10,ON=4,SCOPE=GLOBAL;
278 <SKIPCMD:LABEL=END;
279 /
280 .OUT <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
281 /
282 // *******************************
283 // *** FINISHED WITHOUT FAULTS ***
284 // *******************************
285 //
286 // ************************************************
287 // *** APS QUARTERLY SAVING PART 1 IS FINISHED. ***
288 // ************************************************
289 /
290 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
291 <SKIPCMD:LABEL=END;
292 /
293 .OUT1 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
294 /
295 // ****************************
296 // *** FINISHED WITH FAULTS ***
297 // ****************************
298 //
299 // *********************************************************
300 // *** APS QUARTERLY SAVING HAS BEEN INTERRUPTED BECAUSE ***

MMN:SW-COFIP-178 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

Q21AP

301 // *** APS ROUTINE SAVING IS SCHEDULED. ***

302 // *** ***
303 // *** EXECUTE PROCEDURE SW210 FOR APS ROUTINE SAVING. ***
304 // *********************************************************
305 /
306 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
307 <SKIPCMD:LABEL=END;
308 /
309 .OUT2 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
310 /
311 // ****************************
312 // *** FINISHED WITH FAULTS ***
313 // ****************************
314 //
315 // ************************************************
316 // *** NO LOG FILE FOR QUARTERLY SAVING EXISTS. ***
317 // *** APS QUARTERLY SAVING PART 1 IS FINISHED. ***
318 // ************************************************
319 /
320 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
321 <SKIPCMD:LABEL=END;
322 /
323 .END <SETCFOPT:ACKCFS=ERROR,DANCMD=NOEXEC,ACKREQ=NEG,SCOPE=GLOBAL;
324 <ENDFILE;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-179
MMN:SW Maintenance
Software

Q22AP

1 <CMDFILE;
2 /
3 // 80-Q22AP-05
4 /
5 /****V05***************************************************************
6 /* *
7 /* COMMAND FILE CG.SA.Q22AP QUARTERLY SAVE OF APS ON MO (PART 2) *
8 /* ============================================================= *
9 /* *
10 /* TASK DESCRIPTION: *
11 /* ----------------- *
12 /* *
13 /* - CREATING FALL BACK GENERATION ON DISKS AND MO *
14 /* *
15 /* HOLD MO READY/LOADING LOADMOD STATION: *
16 /* ---------------------------------- *
17 /* - A MOD (MAGNETO OPTICAL DISK) WITHOUT WRITE PROTECT *
18 /* IS TO BE HELD READY *
19 /* - BEFORE STARTING THE COMMAND FILE THE MOD STATION *
20 /* IS TO BE LOADED *
21 /* *
22 /* FAULT HANDLING: *
23 /* --------------- *
24 /* - AFTER INTERRUPTION OF THE FILE PROCESSING VIA FAULT *
25 /* EXITS AND CORRESPONDING FAULT HANDLING THE FILE CAN *
26 /* BE STARTED AGAIN *
27 /* *
28 /* SWITCH PRESETTINGS FOR START POINTS AND ENTRY POINTS: *
29 /* ===================================================== *
30 /* START POINT SWITCH PRESETTINGS *
31 /* ----------- ------------------ *
32 /* RESETCFOPT; *
33 /* *
34 /* ENTRY POINT SWITCH PRESETTINGS *
35 /* ----------- ------------------ *
36 /* M2 SETCFOPT:OFF=1&3&&10,ON=2,SCOPE=GLOBAL; *
37 /* M4 SETCFOPT:OFF=1&2&4&&10,ON=3,SCOPE=GLOBAL; *
38 /* M4 SETCFOPT:OFF=1&&3&5&&10,ON=4,SCOPE=GLOBAL; *
39 /* M4 SETCFOPT:OFF=1&&4&6&&10,ON=5,SCOPE=GLOBAL; *
40 /* *
41 /* FAULT 01, 02 SETCFOPT:OFF=1&3&&10,ON=2,SCOPE=GLOBAL; *
42 /* FAULT 02 SETCFOPT:OFF=1&2&4&&10,ON=3,SCOPE=GLOBAL; *
43 /* FAULT 03 SETCFOPT:OFF=1&&3&5&&10,ON=4,SCOPE=GLOBAL; *
44 /* FAULT 05 SETCFOPT:OFF=1&&4&6&&10,ON=5,SCOPE=GLOBAL; *
45 /* *
46 /**********************************************************************
47 /
48 <SETCFOPT:ACKCFS=ERROR,DANCMD=EXEC,ACKREQ=POS,SCOPE=GLOBAL;
49 /
50 <SKIPCMD:LABEL=END,ON=1;

MMN:SW-COFIP-180 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

Q22AP

51 <SKIPCMD:LABEL=M2,ON=2;
52 <SKIPCMD:LABEL=M4,ON=3;
53 <SKIPCMD:LABEL=M4,ON=4;
54 <SKIPCMD:LABEL=M4,ON=5;
55 /
56 .M1 <STEP;
57 /
58 <DISP FILE:FILE=LG.LOG1.;
59 <SKIPCMD:LABEL=OUT1,ON=32;
60 /
61 //
62 // ****************************************************
63 // * DISPLAYING GENERATION STATUS AND LOG FILE STATUS *
64 // ****************************************************
65 //
66 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
67 <DISP GEN:DISPL=LIST;
68 <DISP GEN:DISPL=FILES;
69 <STAT LOG;
70 <DISP FILE:FILE=LG.;
71 <DISP FILE:FILE=LQ.;
72 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
73 /
74 .T11 <DISP FILE:FILE=DUMMY.QAP;
75 <SKIPCMD:LABEL=M2,ON=32;
76 <DEL FILE:FILE=DUMMY.QAP;
77 /
78 .M2 <STEP;
79 //
80 // *******************************
81 // * LABELING GENERATION SAVE MO *
82 // *******************************
83 //
84 <INIT MO:VSN=SAVMOD,MOD=00,CD=EBC;
85 <SKIPCMD:LABEL=AB1,ON=32;
86 /
87 .M3 <STEP;
88 //
89 // *************************************************
90 // * CREATING DISK/MO FALL BACK GENERATION STARTED *
91 // *************************************************
92 //
93 <COPY GEN:OUTPUT=TAPMOD,VERIFY=YES,VSN=SAVMOD,TYPE=GOLDEN,REWIND=NO;
94 <SKIPCMD:LABEL=AB2,ON=32;
95 /
96 .M4 <STEP;
97 //
98 // ********************************
99 // * COPYING GENERATIONLESS FILES *
100 // ********************************

A30808-X3080-C485-5-7620 MMN:SW-COFIP-181
MMN:SW Maintenance
Software

Q22AP

101 //
102 .T41 <STEP;
103 <SKIPCMD:LABEL=T42,ON=3;
104 <SKIPCMD:LABEL=T43,ON=4;
105 <SKIPCMD:LABEL=T44,ON=5;
106 /
107 .T42 <TRANS FILE:VSNR=SAVMOD,COPMOD=SSWF,FILE=SY.MSGXREF;
108 <SKIPCMD:LABEL=AB3,ON=32;
109 /
110 .T43 <MOD FILEAUT:FILE=SJ.SECDATA,AR=NOAR;
111 /
112 <TRANS FILE:VSNR=SAVMOD,COPMOD=SSWF,FILE=SJ.SECDATA;
113 <SKIPCMD:LABEL=AB4,ON=32;
114 /
115 .T44 <TRANS FILE:VSNR=SAVMOD,COPMOD=SSWF,FILE=CG.;
116 <SKIPCMD:LABEL=AB5,ON=32;
117 /
118 .M5 <STEP;
119 //
120 // ***********************************************
121 // * CREATING DISK/MO FALL BACK GENERATION ENDED *
122 // ***********************************************
123 //
124 <RSET MO:VSN=SAVMOD;
125 /
126 .M6 <STEP;
127 //
128 // ****************************************************
129 // * DISPLAYING GENERATION STATUS AND LOG FILE STATUS *
130 // ****************************************************
131 //
132 <MOD FILEAUT:FILE=SJ.SECDATA,AR=NOAR;
133 /
134 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
135 <DISP GEN:DISPL=LIST;
136 <DISP GEN:DISPL=FILES;
137 <STAT LOG;
138 <DISP FILE:FILE=LG.;
139 <DISP FILE:FILE=LQ.;
140 <DISP FILE:FILE=TLG.;
141 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
142 /
143 <SKIPCMD:LABEL=OUT;
144 / *******************************
145 / * FAULT EXITS AND END MESSAGE *
146 / *******************************
147 /
148 /
149 .AB1 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
150 // ****************

MMN:SW-COFIP-182 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

Q22AP

151 // *** FAULT 01 ***

152 // ****************
153 //
154 // **************************************************
155 // *** LABELING GENERATIONS SAVE MO ***
156 // *** NOT EXECUTED. ***
157 // *** ***
158 // *** MOD STATION IS DEFECTIVE OR MO IS DAMAGED: ***
159 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
160 // *** ***
161 // *** START COMMAND FILE CG.SA.Q22AP AGAIN. ***
162 // **************************************************
163 /
164 <SETCFOPT:OFF=1&3&&10,ON=2,SCOPE=GLOBAL;
165 <SKIPCMD:LABEL=END;
166 /
167 .AB2 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
168 // *****************
169 // *** FEHLER 02 ***
170 // *****************
171 //
172 // ****************************************************
173 // *** CREATING FALL BACK GENERATION ON MO ***
174 // *** NOT EXECUTED. ***
175 // *** ***
176 // *** MOD STATION IS DEFECTIVE OR MO IS DAMAGED OR ***
177 // *** CHECKSUM AUDIT ERROR OF ONE OR MORE ***
178 // *** GENERATION FILE(S) DETECTED: ***
179 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
180 // *** ***
181 // *** (IF NECESSARY FAULT CLEARANCE IS TO BE DONE ***
182 // *** ACCORDING TO MMN:SW PROCEDURE SW500.) ***
183 // *** ******************************************* ***
184 // *** ***
185 // *** EVALUATE CHECKSUM AUDIT ERROR ALARM MASK, ***
186 // *** REPAIR FILE(S) IF NECESSARY. ***
187 // *** ***
188 // *** START COMMAND FILE CG.SA.Q22AP AGAIN. ***
189 // ****************************************************
190 /
191 <RSET MO:VSN=SAVMOD;
192 /
193 <SETCFOPT:OFF=1&3&&10,ON=2,SCOPE=GLOBAL;
194 <SKIPCMD:LABEL=END;
195 /
196 .AB3 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
197 // ****************
198 // *** FAULT 03 ***
199 // ****************
200 //

A30808-X3080-C485-5-7620 MMN:SW-COFIP-183
MMN:SW Maintenance
Software

Q22AP

201 // *************************************************
202 // *** TRANSFERRING OF GENERATIONLESS FILES ***
203 // *** (FILE SY.MSGXREF) NOT EXECUTED. ***
204 // *** ***
205 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
206 // *** ***
207 // *** START COMMAND FILE CG.SA.Q22AP AGAIN. ***
208 // *************************************************
209 /
210 <SETCFOPT:OFF=1&2&4&&10,ON=3,SCOPE=GLOBAL;
211 <SKIPCMD:LABEL=END;
212 /
213 .AB4 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
214 // ****************
215 // *** FAULT 04 ***
216 // ****************
217 //
218 // *************************************************
219 // *** TRANSFERRING OF GENERATIONLESS FILES ***
220 // *** (FILE SJ.SECDATA) NOT EXECUTED. ***
221 // *** ***
222 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
223 // *** ***
224 // *** START COMMAND FILE CG.SA.Q22AP AGAIN. ***
225 // *************************************************
226 /
227 <SETCFOPT:OFF=1&&3&5&&10,ON=4,SCOPE=GLOBAL;
228 <SKIPCMD:LABEL=END;
229 /
230 .AB5 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
231 // ****************
232 // *** FAULT 05 ***
233 // ****************
234 //
235 // *************************************************
236 // *** TRANSFERRING OF GENERATIONLESS FILES ***
237 // *** (FILES CG.SA.*) NOT EXECUTED. ***
238 // *** ***
239 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
240 // *** ***
241 // *** START COMMAND FILE CG.SA.Q22AP AGAIN. ***
242 // *************************************************
243 /
244 <SETCFOPT:OFF=1&&4&6&&10,ON=5,SCOPE=GLOBAL;
245 <SKIPCMD:LABEL=END;
246 /
247 .OUT1 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
248 /
249 // ****************************
250 // *** FINISHED WITH FAULTS ***

MMN:SW-COFIP-184 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

Q22AP

251 // ****************************
252 //
253 // **********************************************************
254 // *** APS QUARTERLY SAVING (PART 2) HAS BEEN INTERRUPTED ***
255 // *** BECAUSE APS ROUTINE SAVING IS SCHEDULED. ***
256 // *** ***
257 // *** EXECUTE PROCEDURE SW210 FOR APS ROUTINE SAVING. ***
258 // **********************************************************
259 /
260 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
261 <SKIPCMD:LABEL=END;
262 /
263 .OUT <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
264 /
265 // *******************************
266 // *** FINISHED WITHOUT FAULTS ***
267 // *******************************
268 //
269 // ************************************************
270 // *** APS QUARTERLY SAVING PART 2 IS FINISHED. ***
271 // ************************************************
272 /
273 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
274 <SKIPCMD:LABEL=END;
275 /
276 .END <SETCFOPT:ACKCFS=ERROR,DANCMD=NOEXEC,ACKREQ=NEG,SCOPE=GLOBAL;
277 <ENDFILE;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-185
MMN:SW Maintenance
Software

R21AP

1 <CMDFILE;
2 /
3 // 80-R21AP-05
4 /
5 /****V05***************************************************************
6 /* *
7 /* COMMAND FILE CG.SA.R21AP FOR APS ROUTINE SAVING ON MO *
8 /* ===================================================== *
9 /* *
10 /* TASK DESCRIPTION: *
11 /* ----------------- *
12 /* *
13 /* - CREATING FALL BACK GENERATION ON MO *
14 /* - CREATING FIXPOINT GENERATION ON MO *
15 /* - MO SAVING LOG FILES *
16 /* *
17 /* FAULT HANDLING: *
18 /* --------------- *
19 /* - AFTER INTERRUPTION OF THE FILE PROCESSING VIA FAULT *
20 /* EXITS AND CORRESPONDING FAULT HANDLING THE FILE CAN *
21 /* BE STARTED AGAIN *
22 /* *
23 /* SWITCH PRESETTINGS FOR START POINTS AND ENTRY POINTS: *
24 /* ===================================================== *
25 /* START POINT SWITCH PRESETTINGS *
26 /* ----------- ------------------ *
27 /* RESETCFOPT; *
28 /* *
29 /* ENTRY POINT SWITCH PRESETTINGS *
30 /* ----------- ------------------ *
31 /* FAULT 02 SETCFOPT:OFF=1&2&4&&10,ON=3,SCOPE=GLOBAL; *
32 /* FAULT 03 SETCFOPT:OFF=1&&3&5&&10,ON=4,SCOPE=GLOBAL; *
33 /* FAULT 04 SETCFOPT:OFF=1&3&&10,ON=2,SCOPE=GLOBAL; *
34 /* FAULT 05 SETCFOPT:OFF=1&&5&7&&10,ON=6,SCOPE=GLOBAL; *
35 /* FAULT 06 SETCFOPT:OFF=1&&6&8&&10,ON=7,SCOPE=GLOBAL; *
36 /* FAULT 08 SETCFOPT:OFF=1&&7&9&10,ON=8,SCOPE=GLOBAL; *
37 /* FAULT 09 SETCFOPT:OFF=1&&8&10,ON=9,SCOPE=GLOBAL; *
38 /* FAULT 10 SETCFOPT:OFF=1&&9,ON=10,SCOPE=GLOBAL; *
39 /* FAULT 11 SETCFOPT:OFF=1&&8,ON=9&10,SCOPE=GLOBAL; *
40 /* FAULT 12 SETCFOPT:OFF=2&&10,ON=1,SCOPE=GLOBAL; *
41 /* FAULT 13 SETCFOPT:OFF=2&&8,ON=1&9&10,SCOPE=GLOBAL; *
42 /* *
43 /* AND: *
44 /* ---- *
45 /* *
46 /* B1 (1.ROUTINE) SETCFOPT:ON=11,SCOPE=GLOBAL; *
47 /* OR: *
48 /* B2 (2.ROUTINE) SETCFOPT:ON=12,SCOPE=GLOBAL; *
49 /* OR: *
50 /* B3 (3.ROUTINE) SETCFOPT:ON=13,SCOPE=GLOBAL; *

MMN:SW-COFIP-186 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

R21AP

51 /* OR: *
52 /* B4 (4.ROUTINE) SETCFOPT:ON=14,SCOPE=GLOBAL; *
53 /* OR: *
54 /* B5 (5.ROUTINE) SETCFOPT:ON=15,SCOPE=GLOBAL; *
55 /* *
56 /**********************************************************************
57 /
58 <SETCFOPT:ACKCFS=ERROR,DANCMD=EXEC,ACKREQ=POS,SCOPE=GLOBAL;
59 /
60 <SKIPCMD:LABEL=B1,ON=11;
61 <SKIPCMD:LABEL=B2,ON=12;
62 <SKIPCMD:LABEL=B3,ON=13;
63 <SKIPCMD:LABEL=B4,ON=14;
64 <SKIPCMD:LABEL=B5,ON=15;
65 /
66 .M1 <STEP;
67 <DISP FILE:FILE=LG.;
68 <SKIPCMD:LABEL=OUT2,ON=32;
69 /
70 <DISP FILE:FILE=LG.LOG6.;
71 <SKIPCMD:LABEL=OUT1,OFF=32;
72 /
73 <DISP FILE:FILE=DUMMY.QAP;
74 <SKIPCMD:LABEL=OUT3,OFF=32;
75 /
76 .M2 <STEP;
77 /
78 //
79 // ****************************************************
80 // * DISPLAYING GENERATION STATUS AND LOG FILE STATUS *
81 // ****************************************************
82 /
83 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
84 <DISP GEN:DISPL=LIST;
85 <DISP GEN:DISPL=FILES;
86 <STAT LOG;
87 <DISP FILE:FILE=LG.;
88 <DISP FILE:FILE=LQ.;
89 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
90 /
91 .M3 <STEP;
92 <DACT FNS:FNS=LG;
93 /
94 <DISP FILE:FILE=LQ.;
95 <SKIPCMD:LABEL=M4,ON=32;
96 <DACT FNS:FNS=LQ;
97 /
98 .M4 <STEP;
99 <DISP FILE:FILE=LG.LOG1.;
100 <SKIPCMD:LABEL=M5,ON=32;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-187
MMN:SW Maintenance
Software

R21AP

101 /
102 //
103 // ***********************************************************
104 // * EXECUTION OF 1. ROUTINE SAVE WITHIN THE CURRENT QUARTER *
105 // ***********************************************************
106 /
107 <SETCFOPT:ON=11,SCOPE=GLOBAL;
108 /
109 <DISP FILE:FILE=TLG.LG.;
110 <SKIPCMD:LABEL=B11,ON=32;
111 <DEL FILE:FILE=TLG.LG.;
112 .B11 <DISP FILE:FILE=TLG.LQ.;
113 <SKIPCMD:LABEL=B1,ON=32;
114 <DEL FILE:FILE=TLG.LQ.;
115 /
116 .B1 <STEP;
117 /
118 <SKIPCMD:LABEL=T42,ON=2;
119 <SKIPCMD:LABEL=T42,ON=3;
120 <SKIPCMD:LABEL=T43,ON=4;
121 <SKIPCMD:LABEL=T45,ON=6;
122 <SKIPCMD:LABEL=M9,ON=7;
123 <SKIPCMD:LABEL=T431,ON=8;
124 <SKIPCMD:LABEL=T451,ON=9;
125 /
126 .T42 <STEP;
127 /
128 // ********************************
129 // * LABELING APS ROUTINE SAVE MO *
130 // ********************************
131 /
132 <INIT MO:VSN=LOGMOD,MOD=00,CD=EBC;
133 <SKIPCMD:LABEL=AB2,ON=32;
134 /
135 .T43 <STEP;
136 <SKIPCMD:LABEL=T44,ON=2;
137 /
138 //
139 // *********************
140 // * CHANGING LOG FILE *
141 // *********************
142 /
143 <MOD LOGFILE:FILE=LOG2,SIZE=24,ERASE=YES;
144 <SKIPCMD:LABEL=AB3,ON=32;
145 /
146 .T431 <STEP;
147 /
148 //
149 // ***********************************
150 // * DISK SAVING OF CLOSED LOG FILES *

MMN:SW-COFIP-188 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

R21AP

151 // ***********************************
152 /
153 <TRANS FILE:FILE=TLG.LG.LOG1./LG.LOG1.,MODE=CRD;
154 <SKIPCMD:LABEL=AB8,ON=32;
155 /
156 <DISP FILE:FILE=LQ.;
157 <SKIPCMD:LABEL=T44,ON=32;
158 <TRANS FILE:FILE=TLG.LQ.LOG1./LQ.LOG1.,MODE=CRD;
159 <SKIPCMD:LABEL=AB8,ON=32;
160 /
161 .T44 <STEP;
162 /
163 //
164 // **********************************************
165 // * CREATING GENERATION FIXPOINT ON MO STARTED *
166 // **********************************************
167 /
168 <COPY GEN:OUTPUT=FIX,VERIFY=YES,VSN=LOGMOD,REWIND=YES;
169 <SKIPCMD:LABEL=AB4,ON=32;
170 /
171 //
172 // ********************************************
173 // * CREATING GENERATION FIXPOINT ON MO ENDED *
174 // ********************************************
175 /
176 .T45 <STEP;
177 /
178 //
179 // ************************************
180 // * DISK TO MO TRANSFER OF LOG FILES *
181 // ************************************
182 /
183 <DISP FILE:FILE=LG.LOG1.;
184 <SKIPCMD:LABEL=T451,ON=32;
185 /
186 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LG.LOG1.;
187 <SKIPCMD:LABEL=AB5,ON=32;
188 <DEL FILE:FILE=LG.LOG1.;
189 /
190 <DISP FILE:FILE=LQ.;
191 <SKIPCMD:LABEL=T451C,ON=32;
192 /
193 <DISP FILE:FILE=LQ.LOG1.;
194 <SKIPCMD:LABEL=T451B,ON=32;
195 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LQ.LOG1.;
196 <SKIPCMD:LABEL=AB5,ON=32;
197 <DEL FILE:FILE=LQ.LOG1.;
198 /
199 <SKIPCMD:LABEL=T451C;
200 /

A30808-X3080-C485-5-7620 MMN:SW-COFIP-189
MMN:SW Maintenance
Software

R21AP

201 .T451 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LG.LOG1.A0/TLG.LG.LOG1.A0;

202 <SKIPCMD:LABEL=AB9,ON=32;
203 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LG.LOG1.A1/TLG.LG.LOG1.A1;
204 <SKIPCMD:LABEL=AB9,ON=32;
205 <DISP FILE:FILE=LG.LOG1.A2;
206 <SKIPCMD:LABEL=T451A,ON=32;
207 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LG.LOG1.A2/TLG.LG.LOG1.A2;
208 <SKIPCMD:LABEL=AB9,ON=32;
209 <DISP FILE:FILE=LG.LOG1.A3;
210 <SKIPCMD:LABEL=T451A,ON=32;
211 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LG.LOG1.A3/TLG.LG.LOG1.A3;
212 <SKIPCMD:LABEL=AB9,ON=32;
213 /
214 .T451A <DISP FILE:FILE=LQ.;
215 <SKIPCMD:LABEL=T451C,ON=32;
216 /
217 <DISP FILE:FILE=LQ.LOG1.;
218 <SKIPCMD:LABEL=T451B,ON=32;
219 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LQ.LOG1.;
220 <SKIPCMD:LABEL=AB5,ON=32;
221 <DEL FILE:FILE=LQ.LOG1.;
222 <SKIPCMD:LABEL=T451C;
223 /
224 .T451B <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LQ.LOG1.A1/TLG.LQ.LOG1.A1;
225 <SKIPCMD:LABEL=AB9,ON=32;
226 <DISP FILE:FILE=LQ.LOG1.A2;
227 <SKIPCMD:LABEL=T451C,ON=32;
228 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LQ.LOG1.A2/TLG.LQ.LOG1.A2;
229 <SKIPCMD:LABEL=AB9,ON=32;
230 <DISP FILE:FILE=LQ.LOG1.A3;
231 <SKIPCMD:LABEL=T451C,ON=32;
232 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LQ.LOG1.A3/TLG.LQ.LOG1.A3;
233 <SKIPCMD:LABEL=AB9,ON=32;
234 /
235 .T451C <SKIPCMD:LABEL=M9;
236 /
237 .M5 <STEP;
238 <DISP FILE:FILE=LG.LOG2.;
239 <SKIPCMD:LABEL=M6,ON=32;
240 /
241 //
242 // ***********************************************************
243 // * EXECUTION OF 2. ROUTINE SAVE WITHIN THE CURRENT QUARTER *
244 // ***********************************************************
245 /
246 <SETCFOPT:ON=12,SCOPE=GLOBAL;
247 /
248 .B2 <STEP;
249 <SKIPCMD:LABEL=T52,ON=2;
250 <SKIPCMD:LABEL=T52,ON=3;

MMN:SW-COFIP-190 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

R21AP

251 <SKIPCMD:LABEL=T53,ON=4;
252 <SKIPCMD:LABEL=T55,ON=6;
253 <SKIPCMD:LABEL=M9,ON=7;
254 <SKIPCMD:LABEL=T531,ON=8;
255 <SKIPCMD:LABEL=T551,ON=9;
256 <SKIPCMD:LABEL=T553,ON=10;
257 /
258 .T51 <STEP;
259 /
260 //
261 // ************************************
262 // * MO TO DISK TRANSFER OF LOG FILES *
263 // ************************************
264 /
265 <TRANS FILE:VSNS=LOGMOD,COPMOD=CHAR,FILE=LG.;
266 <STEP;
267 <TRANS FILE:VSNS=LOGMOD,COPMOD=BIN,FILE=LQ.;
268 <STEP;
269 <RSET MO:VSN=LOGMOD;
270 /
271 .T52 <STEP;
272 /
273 // ********************************
274 // * LABELING APS ROUTINE SAVE MO *
275 // ********************************
276 /
277 <INIT MO:VSN=LOGMOD,MOD=00,CD=EBC;
278 <SKIPCMD:LABEL=AB2,ON=32;
279 /
280 .T53 <STEP;
281 <SKIPCMD:LABEL=T54,ON=2;
282 /
283 //
284 // *********************
285 // * CHANGING LOG FILE *
286 // *********************
287 /
288 <MOD LOGFILE:FILE=LOG3,SIZE=24,ERASE=YES;
289 <SKIPCMD:LABEL=AB3,ON=32;
290 /
291 .T531 <STEP;
292 /
293 //
294 // ***********************************
295 // * DISK SAVING OF CLOSED LOG FILES *
296 // ***********************************
297 /
298 <TRANS FILE:FILE=TLG.LG.LOG2./LG.LOG2.,MODE=CRD;
299 <SKIPCMD:LABEL=AB8,ON=32;
300 /

A30808-X3080-C485-5-7620 MMN:SW-COFIP-191
MMN:SW Maintenance
Software

R21AP

301 <DISP FILE:FILE=LQ.;

302 <SKIPCMD:LABEL=T54,ON=32;
303 <TRANS FILE:FILE=TLG.LQ.LOG2./LQ.LOG2.,MODE=CRD;
304 <SKIPCMD:LABEL=AB8,ON=32;
305 /
306 .T54 <STEP;
307 /
308 //
309 // **********************************************
310 // * CREATING GENERATION FIXPOINT ON MO STARTED *
311 // **********************************************
312 /
313 <COPY GEN:OUTPUT=FIX,VERIFY=YES,VSN=LOGMOD,REWIND=YES;
314 <SKIPCMD:LABEL=AB4,ON=32;
315 /
316 //
317 // ********************************************
318 // * CREATING GENERATION FIXPOINT ON MO ENDED *
319 // ********************************************
320 /
321 .T55 <STEP;
322 /
323 //
324 // ************************************
325 // * DISK TO MO TRANSFER OF LOG FILES *
326 // ************************************
327 /
328 <DISP FILE:FILE=LG.LOG1.;
329 <SKIPCMD:LABEL=T551,ON=32;
330 /
331 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LG.LOG1.;
332 <SKIPCMD:LABEL=AB5,ON=32;
333 <DEL FILE:FILE=LG.LOG1.;
334 /
335 <DISP FILE:FILE=LQ.;
336 <SKIPCMD:LABEL=T552,ON=32;
337 /
338 <DISP FILE:FILE=LQ.LOG1.;
339 <SKIPCMD:LABEL=T551B,ON=32;
340 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LQ.LOG1.;
341 <SKIPCMD:LABEL=AB5,ON=32;
342 <DEL FILE:FILE=LQ.LOG1.;
343 <SKIPCMD:LABEL=T552;
344 /
345 .T551 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LG.LOG1.A0/TLG.LG.LOG1.A0;
346 <SKIPCMD:LABEL=AB9,ON=32;
347 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LG.LOG1.A1/TLG.LG.LOG1.A1;
348 <SKIPCMD:LABEL=AB9,ON=32;
349 <DISP FILE:FILE=LG.LOG1.A2;
350 <SKIPCMD:LABEL=T551A,ON=32;

MMN:SW-COFIP-192 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

R21AP

351 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LG.LOG1.A2/TLG.LG.LOG1.A2;

352 <SKIPCMD:LABEL=AB9,ON=32;
353 <DISP FILE:FILE=LG.LOG1.A3;
354 <SKIPCMD:LABEL=T551A,ON=32;
355 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LG.LOG1.A3/TLG.LG.LOG1.A3;
356 <SKIPCMD:LABEL=AB9,ON=32;
357 /
358 .T551A <DISP FILE:FILE=LQ.;
359 <SKIPCMD:LABEL=T552,ON=32;
360 /
361 <DISP FILE:FILE=LQ.LOG1.;
362 <SKIPCMD:LABEL=T551B,ON=32;
363 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LQ.LOG1.;
364 <SKIPCMD:LABEL=AB5,ON=32;
365 <DEL FILE:FILE=LQ.LOG1.;
366 <SKIPCMD:LABEL=T552;
367 /
368 .T551B <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LQ.LOG1.A1/TLG.LQ.LOG1.A1;
369 <SKIPCMD:LABEL=AB9,ON=32;
370 <DISP FILE:FILE=LQ.LOG1.A2;
371 <SKIPCMD:LABEL=T552,ON=32;
372 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LQ.LOG1.A2/TLG.LQ.LOG1.A2;
373 <SKIPCMD:LABEL=AB9,ON=32;
374 <DISP FILE:FILE=LQ.LOG1.A3;
375 <SKIPCMD:LABEL=T552,ON=32;
376 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LQ.LOG1.A3/TLG.LQ.LOG1.A3;
377 <SKIPCMD:LABEL=AB9,ON=32;
378 /
379 .T552 <DISP FILE:FILE=LG.LOG2.;
380 <SKIPCMD:LABEL=T553,ON=32;
381 /
382 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LG.LOG2.;
383 <SKIPCMD:LABEL=AB5,ON=32;
384 <DEL FILE:FILE=LG.LOG2.;
385 /
386 <DISP FILE:FILE=LQ.;
387 <SKIPCMD:LABEL=T553C,ON=32;
388 <DISP FILE:FILE=LQ.LOG2.;
389 <SKIPCMD:LABEL=T553B,ON=32;
390 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LQ.LOG2.;
391 <SKIPCMD:LABEL=AB5,ON=32;
392 <DEL FILE:FILE=LQ.LOG2.;
393 <SKIPCMD:LABEL=T553C;
394 /
395 .T553 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LG.LOG2.A0/TLG.LG.LOG2.A0;
396 <SKIPCMD:LABEL=AB10,ON=32;
397 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LG.LOG2.A1/TLG.LG.LOG2.A1;
398 <SKIPCMD:LABEL=AB10,ON=32;
399 <DISP FILE:FILE=LG.LOG2.A2;
400 <SKIPCMD:LABEL=T553A,ON=32;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-193
MMN:SW Maintenance
Software

R21AP

401 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LG.LOG2.A2/TLG.LG.LOG2.A2;

402 <SKIPCMD:LABEL=AB10,ON=32;
403 <DISP FILE:FILE=LG.LOG2.A3;
404 <SKIPCMD:LABEL=T553A,ON=32;
405 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LG.LOG2.A3/TLG.LG.LOG2.A3;
406 <SKIPCMD:LABEL=AB10,ON=32;
407 /
408 .T553A <DISP FILE:FILE=LQ.;
409 <SKIPCMD:LABEL=T553C,ON=32;
410 /
411 <DISP FILE:FILE=LQ.LOG2.;
412 <SKIPCMD:LABEL=T553B,ON=32;
413 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LQ.LOG2.;
414 <SKIPCMD:LABEL=AB5,ON=32;
415 <DEL FILE:FILE=LQ.LOG2.;
416 <SKIPCMD:LABEL=T553C,ON=32;
417 /
418 .T553B <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LQ.LOG2.A1/TLG.LQ.LOG2.A1;
419 <SKIPCMD:LABEL=AB10,ON=32;
420 <DISP FILE:FILE=LQ.LOG2.A2;
421 <SKIPCMD:LABEL=T553C,ON=32;
422 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LQ.LOG2.A2/TLG.LQ.LOG2.A2;
423 <SKIPCMD:LABEL=AB10,ON=32;
424 <DISP FILE:FILE=LQ.LOG2.A3;
425 <SKIPCMD:LABEL=T553C,ON=32;
426 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LQ.LOG2.A3/TLG.LQ.LOG2.A3;
427 <SKIPCMD:LABEL=AB10,ON=32;
428 /
429 .T553C <SKIPCMD:LABEL=M9;
430 /
431 .M6 <STEP;
432 <DISP FILE:FILE=LG.LOG3.;
433 <SKIPCMD:LABEL=M7,ON=32;
434 /
435 //
436 // ***********************************************************
437 // * EXECUTION OF 3. ROUTINE SAVE WITHIN THE CURRENT QUARTER *
438 // ***********************************************************
439 /
440 <SETCFOPT:ON=13,SCOPE=GLOBAL;
441 /
442 .B3 <STEP;
443 <SKIPCMD:LABEL=T62,ON=2;
444 <SKIPCMD:LABEL=T62,ON=3;
445 <SKIPCMD:LABEL=T63,ON=4;
446 <SKIPCMD:LABEL=T65,ON=6;
447 <SKIPCMD:LABEL=M9,ON=7;
448 <SKIPCMD:LABEL=T631,ON=8;
449 <SKIPCMD:LABEL=T655,ON=9&10;
450 <SKIPCMD:LABEL=T651,ON=9;

MMN:SW-COFIP-194 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

R21AP

451 <SKIPCMD:LABEL=T653,ON=10;
452 /
453 .T61 <STEP;
454 /
455 //
456 // ************************************
457 // * MO TO DISK TRANSFER OF LOG FILES *
458 // ************************************
459 /
460 <TRANS FILE:VSNS=LOGMOD,COPMOD=CHAR,FILE=LG.;
461 <STEP;
462 <TRANS FILE:VSNS=LOGMOD,COPMOD=BIN,FILE=LQ.;
463 <STEP;
464 <RSET MO:VSN=LOGMOD;
465 /
466 .T62 <STEP;
467 /
468 // ********************************
469 // * LABELING APS ROUTINE SAVE MO *
470 // ********************************
471 /
472 <INIT MO:VSN=LOGMOD,MOD=00,CD=EBC;
473 <SKIPCMD:LABEL=AB2,ON=32;
474 /
475 .T63 <STEP;
476 <SKIPCMD:LABEL=T64,ON=2;
477 /
478 //
479 // *********************
480 // * CHANGING LOG FILE *
481 // *********************
482 /
483 <MOD LOGFILE:FILE=LOG4,SIZE=24,ERASE=YES;
484 <SKIPCMD:LABEL=AB3,ON=32;
485 /
486 .T631 <STEP;
487 /
488 //
489 // ***********************************
490 // * MO SAVING OF CLOSED LOG FILES *
491 // ***********************************
492 /
493 <TRANS FILE:FILE=TLG.LG.LOG3./LG.LOG3.,MODE=CRD;
494 <SKIPCMD:LABEL=AB8,ON=32;
495 /
496 <DISP FILE:FILE=LQ.;
497 <SKIPCMD:LABEL=T64,ON=32;
498 <TRANS FILE:FILE=TLG.LQ.LOG3./LQ.LOG3.,MODE=CRD;
499 <SKIPCMD:LABEL=AB8,ON=32;
500 /

A30808-X3080-C485-5-7620 MMN:SW-COFIP-195
MMN:SW Maintenance
Software

R21AP

501 .T64 <STEP;

502 /
503 //
504 // **********************************************
505 // * CREATING GENERATION FIXPOINT ON MO STARTED *
506 // **********************************************
507 /
508 <COPY GEN:OUTPUT=FIX,VERIFY=YES,VSN=LOGMOD,REWIND=YES;
509 <SKIPCMD:LABEL=AB4,ON=32;
510 /
511 //
512 // ********************************************
513 // * CREATING GENERATION FIXPOINT ON MO ENDED *
514 // ********************************************
515 /
516 .T65 <STEP;
517 /
518 //
519 // ************************************
520 // * DISK TO MO TRANSFER OF LOG FILES *
521 // ************************************
522 /
523 <DISP FILE:FILE=LG.LOG1.;
524 <SKIPCMD:LABEL=T651,ON=32;
525 /
526 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LG.LOG1.;
527 <SKIPCMD:LABEL=AB5,ON=32;
528 <DEL FILE:FILE=LG.LOG1.;
529 /
530 <DISP FILE:FILE=LQ.;
531 <SKIPCMD:LABEL=T652,ON=32;
532 /
533 <DISP FILE:FILE=LQ.LOG1.;
534 <SKIPCMD:LABEL=T651B,ON=32;
535 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LQ.LOG1.;
536 <SKIPCMD:LABEL=AB5,ON=32;
537 <DEL FILE:FILE=LQ.LOG1.;
538 <SKIPCMD:LABEL=T652;
539 /
540 .T651 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LG.LOG1.A0/TLG.LG.LOG1.A0;
541 <SKIPCMD:LABEL=AB9,ON=32;
542 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LG.LOG1.A1/TLG.LG.LOG1.A1;
543 <SKIPCMD:LABEL=AB9,ON=32;
544 <DISP FILE:FILE=LG.LOG1.A2;
545 <SKIPCMD:LABEL=T651A,ON=32;
546 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LG.LOG1.A2/TLG.LG.LOG1.A2;
547 <SKIPCMD:LABEL=AB9,ON=32;
548 <DISP FILE:FILE=LG.LOG1.A3;
549 <SKIPCMD:LABEL=T651A,ON=32;
550 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LG.LOG1.A3/TLG.LG.LOG1.A3;

MMN:SW-COFIP-196 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

R21AP

551 <SKIPCMD:LABEL=AB9,ON=32;
552 /
553 .T651A <DISP FILE:FILE=LQ.;
554 <SKIPCMD:LABEL=T652,ON=32;
555 /
556 <DISP FILE:FILE=LQ.LOG1.;
557 <SKIPCMD:LABEL=T651B,ON=32;
558 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LQ.LOG1.;
559 <SKIPCMD:LABEL=AB5,ON=32;
560 <DEL FILE:FILE=LQ.LOG1.;
561 <SKIPCMD:LABEL=T652;
562 /
563 .T651B <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LQ.LOG1.A1/TLG.LQ.LOG1.A1;
564 <SKIPCMD:LABEL=AB9,ON=32;
565 <DISP FILE:FILE=LQ.LOG1.A2;
566 <SKIPCMD:LABEL=T652,ON=32;
567 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LQ.LOG1.A2/TLG.LQ.LOG1.A2;
568 <SKIPCMD:LABEL=AB9,ON=32;
569 <DISP FILE:FILE=LQ.LOG1.A3;
570 <SKIPCMD:LABEL=T652,ON=32;
571 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LQ.LOG1.A3/TLG.LQ.LOG1.A3;
572 <SKIPCMD:LABEL=AB9,ON=32;
573 /
574 .T652 <DISP FILE:FILE=LG.LOG2.;
575 <SKIPCMD:LABEL=T653,ON=32;
576 /
577 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LG.LOG2.;
578 <SKIPCMD:LABEL=AB5,ON=32;
579 <DEL FILE:FILE=LG.LOG2.;
580 /
581 <DISP FILE:FILE=LQ.;
582 <SKIPCMD:LABEL=T654,ON=32;
583 <DISP FILE:FILE=LQ.LOG2.;
584 <SKIPCMD:LABEL=T653B,ON=32;
585 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LQ.LOG2.;
586 <SKIPCMD:LABEL=AB5,ON=32;
587 <DEL FILE:FILE=LQ.LOG2.;
588 <SKIPCMD:LABEL=T654;
589 /
590 .T653 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LG.LOG2.A0/TLG.LG.LOG2.A0;
591 <SKIPCMD:LABEL=AB10,ON=32;
592 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LG.LOG2.A1/TLG.LG.LOG2.A1;
593 <SKIPCMD:LABEL=AB10,ON=32;
594 <DISP FILE:FILE=LG.LOG2.A2;
595 <SKIPCMD:LABEL=T653A,ON=32;
596 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LG.LOG2.A2/TLG.LG.LOG2.A2;
597 <SKIPCMD:LABEL=AB10,ON=32;
598 <DISP FILE:FILE=LG.LOG2.A3;
599 <SKIPCMD:LABEL=T653A,ON=32;
600 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LG.LOG2.A3/TLG.LG.LOG2.A3;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-197
MMN:SW Maintenance
Software

R21AP

601 <SKIPCMD:LABEL=AB10,ON=32;
602 /
603 .T653A <DISP FILE:FILE=LQ.;
604 <SKIPCMD:LABEL=T654,ON=32;
605 /
606 <DISP FILE:FILE=LQ.LOG2.;
607 <SKIPCMD:LABEL=T653B,ON=32;
608 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LQ.LOG2.;
609 <SKIPCMD:LABEL=AB5,ON=32;
610 <DEL FILE:FILE=LQ.LOG2.;
611 <SKIPCMD:LABEL=T654;
612 /
613 .T653B <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LQ.LOG2.A1/TLG.LQ.LOG2.A1;
614 <SKIPCMD:LABEL=AB10,ON=32;
615 <DISP FILE:FILE=LQ.LOG2.A2;
616 <SKIPCMD:LABEL=T654,ON=32;
617 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LQ.LOG2.A2/TLG.LQ.LOG2.A2;
618 <SKIPCMD:LABEL=AB10,ON=32;
619 <DISP FILE:FILE=LQ.LOG2.A3;
620 <SKIPCMD:LABEL=T654,ON=32;
621 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LQ.LOG2.A3/TLG.LQ.LOG2.A3;
622 <SKIPCMD:LABEL=AB10,ON=32;
623 /
624 .T654 <DISP FILE:FILE=LG.LOG3.;
625 <SKIPCMD:LABEL=T655,ON=32;
626 /
627 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LG.LOG3.;
628 <SKIPCMD:LABEL=AB5,ON=32;
629 <DEL FILE:FILE=LG.LOG3.;
630 /
631 <DISP FILE:FILE=LQ.;
632 <SKIPCMD:LABEL=T655C,ON=32;
633 <DISP FILE:FILE=LQ.LOG3.;
634 <SKIPCMD:LABEL=T655B,ON=32;
635 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LQ.LOG3.;
636 <SKIPCMD:LABEL=AB5,ON=32;
637 <DEL FILE:FILE=LQ.LOG3.;
638 <SKIPCMD:LABEL=T655C;
639 /
640 .T655 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LG.LOG3.A0/TLG.LG.LOG3.A0;
641 <SKIPCMD:LABEL=AB11,ON=32;
642 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LG.LOG3.A1/TLG.LG.LOG3.A1;
643 <SKIPCMD:LABEL=AB11,ON=32;
644 <DISP FILE:FILE=LG.LOG3.A2;
645 <SKIPCMD:LABEL=T655A,ON=32;
646 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LG.LOG3.A2/TLG.LG.LOG3.A2;
647 <SKIPCMD:LABEL=AB11,ON=32;
648 <DISP FILE:FILE=LG.LOG3.A3;
649 <SKIPCMD:LABEL=T655A,ON=32;
650 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LG.LOG3.A3/TLG.LG.LOG3.A3;

MMN:SW-COFIP-198 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

R21AP

651 <SKIPCMD:LABEL=AB11,ON=32;
652 /
653 .T655A <DISP FILE:FILE=LQ.;
654 <SKIPCMD:LABEL=T655C,ON=32;
655 /
656 <DISP FILE:FILE=LQ.LOG3.;
657 <SKIPCMD:LABEL=T655B,ON=32;
658 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LQ.LOG3.;
659 <SKIPCMD:LABEL=AB5,ON=32;
660 <DEL FILE:FILE=LQ.LOG3.;
661 <SKIPCMD:LABEL=T655C;
662 /
663 .T655B <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LQ.LOG3.A1/TLG.LQ.LOG3.A1;
664 <SKIPCMD:LABEL=AB11,ON=32;
665 <DISP FILE:FILE=LQ.LOG3.A2;
666 <SKIPCMD:LABEL=T655C,ON=32;
667 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LQ.LOG3.A2/TLG.LQ.LOG3.A2;
668 <SKIPCMD:LABEL=AB11,ON=32;
669 <DISP FILE:FILE=LQ.LOG3.A3;
670 <SKIPCMD:LABEL=T655C,ON=32;
671 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LQ.LOG3.A3/TLG.LQ.LOG3.A3;
672 <SKIPCMD:LABEL=AB11,ON=32;
673 /
674 .T655C <SKIPCMD:LABEL=M9;
675 /
676 .M7 <STEP;
677 <DISP FILE:FILE=LG.LOG4.;
678 <SKIPCMD:LABEL=M8,ON=32;
679 /
680 //
681 // ***********************************************************
682 // * EXECUTION OF 4. ROUTINE SAVE WITHIN THE CURRENT QUARTER *
683 // ***********************************************************
684 /
685 <SETCFOPT:ON=14,SCOPE=GLOBAL;
686 /
687 .B4 <STEP;
688 <SKIPCMD:LABEL=T72,ON=2;
689 <SKIPCMD:LABEL=T72,ON=3;
690 <SKIPCMD:LABEL=T73,ON=4;
691 <SKIPCMD:LABEL=T75,ON=6;
692 <SKIPCMD:LABEL=M9,ON=7;
693 <SKIPCMD:LABEL=T731,ON=8;
694 <SKIPCMD:LABEL=T755,ON=9&10;
695 <SKIPCMD:LABEL=T751,ON=9;
696 <SKIPCMD:LABEL=T753,ON=10;
697 <SKIPCMD:LABEL=T757,ON=1;
698 /
699 .T71 <STEP;
700 /

A30808-X3080-C485-5-7620 MMN:SW-COFIP-199
MMN:SW Maintenance
Software

R21AP

701 //
702 // ************************************
703 // * MO DISK MO TRANSFER OF LOG FILES *
704 // ************************************
705 /
706 <TRANS FILE:VSNS=LOGMOD,COPMOD=CHAR,FILE=LG.;
707 <STEP;
708 <TRANS FILE:VSNS=LOGMOD,COPMOD=BIN,FILE=LQ.;
709 <STEP;
710 <RSET MO:VSN=LOGMOD;
711 /
712 .T72 <STEP;
713 /
714 // ********************************
715 // * LABELING APS ROUTINE SAVE MO *
716 // ********************************
717 /
718 <INIT MO:VSN=LOGMOD,MOD=00,CD=EBC;
719 <SKIPCMD:LABEL=AB2,ON=32;
720 /
721 .T73 <STEP;
722 <SKIPCMD:LABEL=T74,ON=2;
723 /
724 //
725 // *********************
726 // * CHANGING LOG FILE *
727 // *********************
728 /
729 <MOD LOGFILE:FILE=LOG5,SIZE=24,ERASE=YES;
730 <SKIPCMD:LABEL=AB3,ON=32;
731 /
732 .T731 <STEP;
733 /
734 //
735 // ***********************************
736 // * DISK SAVING OF CLOSED LOG FILES *
737 // ***********************************
738 /
739 <TRANS FILE:FILE=TLG.LG.LOG4./LG.LOG4.,MODE=CRD;
740 <SKIPCMD:LABEL=AB8,ON=32;
741 /
742 <DISP FILE:FILE=LQ.;
743 <SKIPCMD:LABEL=T74,ON=32;
744 <TRANS FILE:FILE=TLG.LQ.LOG4./LQ.LOG4.,MODE=CRD;
745 <SKIPCMD:LABEL=AB8,ON=32;
746 /
747 .T74 <STEP;
748 /
749 //
750 // **********************************************

MMN:SW-COFIP-200 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

R21AP

751 // * CREATING GENERATION FIXPOINT ON MO STARTED *

752 // **********************************************
753 /
754 <COPY GEN:OUTPUT=FIX,VERIFY=YES,VSN=LOGMOD,REWIND=YES;
755 <SKIPCMD:LABEL=AB4,ON=32;
756 /
757 //
758 // ********************************************
759 // * CREATING GENERATION FIXPOINT ON MO ENDED *
760 // ********************************************
761 /
762 .T75 <STEP;
763 /
764 //
765 // ************************************
766 // * DISK TO MO TRANSFER OF LOG FILES *
767 // ************************************
768 /
769 <DISP FILE:FILE=LG.LOG1.;
770 <SKIPCMD:LABEL=T751,ON=32;
771 /
772 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LG.LOG1.;
773 <SKIPCMD:LABEL=AB5,ON=32;
774 <DEL FILE:FILE=LG.LOG1.;
775 /
776 <DISP FILE:FILE=LQ.;
777 <SKIPCMD:LABEL=T752,ON=32;
778 /
779 <DISP FILE:FILE=LQ.LOG1.;
780 <SKIPCMD:LABEL=T751B,ON=32;
781 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LQ.LOG1.;
782 <SKIPCMD:LABEL=AB5,ON=32;
783 <DEL FILE:FILE=LQ.LOG1.;
784 <SKIPCMD:LABEL=T752;
785 /
786 .T751 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LG.LOG1.A0/TLG.LG.LOG1.A0;
787 <SKIPCMD:LABEL=AB9,ON=32;
788 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LG.LOG1.A1/TLG.LG.LOG1.A1;
789 <SKIPCMD:LABEL=AB9,ON=32;
790 <DISP FILE:FILE=LG.LOG1.A2;
791 <SKIPCMD:LABEL=T751A,ON=32;
792 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LG.LOG1.A2/TLG.LG.LOG1.A2;
793 <SKIPCMD:LABEL=AB9,ON=32;
794 <DISP FILE:FILE=LG.LOG1.A3;
795 <SKIPCMD:LABEL=T751A,ON=32;
796 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LG.LOG1.A3/TLG.LG.LOG1.A3;
797 <SKIPCMD:LABEL=AB9,ON=32;
798 /
799 .T751A <DISP FILE:FILE=LQ.;
800 <SKIPCMD:LABEL=T752,ON=32;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-201
MMN:SW Maintenance
Software

R21AP

801 /
802 <DISP FILE:FILE=LQ.LOG1.;
803 <SKIPCMD:LABEL=T751B,ON=32;
804 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LQ.LOG1.;
805 <SKIPCMD:LABEL=AB5,ON=32;
806 <DEL FILE:FILE=LQ.LOG1.;
807 <SKIPCMD:LABEL=T752;
808 /
809 .T751B <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LQ.LOG1.A1/TLG.LQ.LOG1.A1;
810 <SKIPCMD:LABEL=AB9,ON=32;
811 <DISP FILE:FILE=LQ.LOG1.A2;
812 <SKIPCMD:LABEL=T752,ON=32;
813 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LQ.LOG1.A2/TLG.LQ.LOG1.A2;
814 <SKIPCMD:LABEL=AB9,ON=32;
815 <DISP FILE:FILE=LQ.LOG1.A3;
816 <SKIPCMD:LABEL=T752,ON=32;
817 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LQ.LOG1.A3/TLG.LQ.LOG1.A3;
818 <SKIPCMD:LABEL=AB9,ON=32;
819 /
820 .T752 <DISP FILE:FILE=LG.LOG2.;
821 <SKIPCMD:LABEL=T753,ON=32;
822 /
823 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LG.LOG2.;
824 <SKIPCMD:LABEL=AB5,ON=32;
825 <DEL FILE:FILE=LG.LOG2.;
826 /
827 <DISP FILE:FILE=LQ.;
828 <SKIPCMD:LABEL=T754,ON=32;
829 <DISP FILE:FILE=LQ.LOG2.;
830 <SKIPCMD:LABEL=T753B,ON=32;
831 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LQ.LOG2.;
832 <SKIPCMD:LABEL=AB5,ON=32;
833 <DEL FILE:FILE=LQ.LOG2.;
834 <SKIPCMD:LABEL=T754;
835 /
836 .T753 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LG.LOG2.A0/TLG.LG.LOG2.A0;
837 <SKIPCMD:LABEL=AB10,ON=32;
838 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LG.LOG2.A1/TLG.LG.LOG2.A1;
839 <SKIPCMD:LABEL=AB10,ON=32;
840 <DISP FILE:FILE=LG.LOG2.A2;
841 <SKIPCMD:LABEL=T753A,ON=32;
842 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LG.LOG2.A2/TLG.LG.LOG2.A2;
843 <SKIPCMD:LABEL=AB10,ON=32;
844 <DISP FILE:FILE=LG.LOG2.A3;
845 <SKIPCMD:LABEL=T753A,ON=32;
846 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LG.LOG2.A3/TLG.LG.LOG2.A3;
847 <SKIPCMD:LABEL=AB10,ON=32;
848 /
849 .T753A <DISP FILE:FILE=LQ.;
850 <SKIPCMD:LABEL=T754,ON=32;

MMN:SW-COFIP-202 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

R21AP

851 /
852 <DISP FILE:FILE=LQ.LOG2.;
853 <SKIPCMD:LABEL=T753B,ON=32;
854 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LQ.LOG2.;
855 <SKIPCMD:LABEL=AB5,ON=32;
856 <DEL FILE:FILE=LQ.LOG2.;
857 <SKIPCMD:LABEL=T754;
858 /
859 .T753B <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LQ.LOG2.A1/TLG.LQ.LOG2.A1;
860 <SKIPCMD:LABEL=AB10,ON=32;
861 <DISP FILE:FILE=LQ.LOG2.A2;
862 <SKIPCMD:LABEL=T754,ON=32;
863 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LQ.LOG2.A2/TLG.LQ.LOG2.A2;
864 <SKIPCMD:LABEL=AB10,ON=32;
865 <DISP FILE:FILE=LQ.LOG2.A3;
866 <SKIPCMD:LABEL=T754,ON=32;
867 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LQ.LOG2.A3/TLG.LQ.LOG2.A3;
868 <SKIPCMD:LABEL=AB10,ON=32;
869 /
870 .T754 <DISP FILE:FILE=LG.LOG3.;
871 <SKIPCMD:LABEL=T755,ON=32;
872 /
873 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LG.LOG3.;
874 <SKIPCMD:LABEL=AB5,ON=32;
875 <DEL FILE:FILE=LG.LOG3.;
876 /
877 <DISP FILE:FILE=LQ.;
878 <SKIPCMD:LABEL=T756,ON=32;
879 <DISP FILE:FILE=LQ.LOG3.;
880 <SKIPCMD:LABEL=T755B,ON=32;
881 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LQ.LOG3.;
882 <SKIPCMD:LABEL=AB5,ON=32;
883 <DEL FILE:FILE=LQ.LOG3.;
884 <SKIPCMD:LABEL=T756;
885 /
886 .T755 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LG.LOG3.A0/TLG.LG.LOG3.A0;
887 <SKIPCMD:LABEL=AB11,ON=32;
888 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LG.LOG3.A1/TLG.LG.LOG3.A1;
889 <SKIPCMD:LABEL=AB11,ON=32;
890 <DISP FILE:FILE=LG.LOG3.A2;
891 <SKIPCMD:LABEL=T755A,ON=32;
892 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LG.LOG3.A2/TLG.LG.LOG3.A2;
893 <SKIPCMD:LABEL=AB11,ON=32;
894 <DISP FILE:FILE=LG.LOG3.A3;
895 <SKIPCMD:LABEL=T755A,ON=32;
896 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LG.LOG3.A3/TLG.LG.LOG3.A3;
897 <SKIPCMD:LABEL=AB11,ON=32;
898 /
899 .T755A <DISP FILE:FILE=LQ.;
900 <SKIPCMD:LABEL=T756,ON=32;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-203
MMN:SW Maintenance
Software

R21AP

901 /
902 <DISP FILE:FILE=LQ.LOG3.;
903 <SKIPCMD:LABEL=T755B,ON=32;
904 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LQ.LOG3.;
905 <SKIPCMD:LABEL=AB5,ON=32;
906 <DEL FILE:FILE=LQ.LOG3.;
907 <SKIPCMD:LABEL=T756;
908 /
909 .T755B <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LQ.LOG3.A1/TLG.LQ.LOG3.A1;
910 <SKIPCMD:LABEL=AB11,ON=32;
911 <DISP FILE:FILE=LQ.LOG3.A2;
912 <SKIPCMD:LABEL=T756,ON=32;
913 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LQ.LOG3.A2/TLG.LQ.LOG3.A2;
914 <SKIPCMD:LABEL=AB11,ON=32;
915 <DISP FILE:FILE=LQ.LOG3.A3;
916 <SKIPCMD:LABEL=T756,ON=32;
917 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LQ.LOG3.A3/TLG.LQ.LOG3.A3;
918 <SKIPCMD:LABEL=AB11,ON=32;
919 /
920 .T756 <DISP FILE:FILE=LG.LOG4.;
921 <SKIPCMD:LABEL=T757,ON=32;
922 /
923 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LG.LOG4.;
924 <SKIPCMD:LABEL=AB5,ON=32;
925 <DEL FILE:FILE=LG.LOG4.;
926 /
927 <DISP FILE:FILE=LQ.;
928 <SKIPCMD:LABEL=T757C,ON=32;
929 <DISP FILE:FILE=LQ.LOG4.;
930 <SKIPCMD:LABEL=T757B,ON=32;
931 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LQ.LOG4.;
932 <SKIPCMD:LABEL=AB5,ON=32;
933 <DEL FILE:FILE=LQ.LOG4.;
934 <SKIPCMD:LABEL=T757C;
935 /
936 .T757 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LG.LOG4.A0/TLG.LG.LOG4.A0;
937 <SKIPCMD:LABEL=AB12,ON=32;
938 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LG.LOG4.A1/TLG.LG.LOG4.A1;
939 <SKIPCMD:LABEL=AB12,ON=32;
940 <DISP FILE:FILE=LG.LOG4.A2;
941 <SKIPCMD:LABEL=T757A,ON=32;
942 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LG.LOG4.A2/TLG.LG.LOG4.A2;
943 <SKIPCMD:LABEL=AB12,ON=32;
944 <DISP FILE:FILE=LG.LOG4.A3;
945 <SKIPCMD:LABEL=T757A,ON=32;
946 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LG.LOG4.A3/TLG.LG.LOG4.A3;
947 <SKIPCMD:LABEL=AB12,ON=32;
948 /
949 .T757A <DISP FILE:FILE=LQ.;
950 <SKIPCMD:LABEL=T757C,ON=32;

MMN:SW-COFIP-204 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

R21AP

951 /
952 <DISP FILE:FILE=LQ.LOG4.;
953 <SKIPCMD:LABEL=T757B,ON=32;
954 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LQ.LOG4.;
955 <SKIPCMD:LABEL=AB5,ON=32;
956 <DEL FILE:FILE=LQ.LOG4.;
957 <SKIPCMD:LABEL=T757C;
958 /
959 .T757B <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LQ.LOG4.A1/TLG.LQ.LOG4.A1;
960 <SKIPCMD:LABEL=AB12,ON=32;
961 <DISP FILE:FILE=LQ.LOG4.A2;
962 <SKIPCMD:LABEL=T757C,ON=32;
963 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LQ.LOG4.A2/TLG.LQ.LOG4.A2;
964 <SKIPCMD:LABEL=AB12,ON=32;
965 <DISP FILE:FILE=LQ.LOG4.A3;
966 <SKIPCMD:LABEL=T757C,ON=32;
967 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LQ.LOG4.A3/TLG.LQ.LOG4.A3;
968 <SKIPCMD:LABEL=AB12,ON=32;
969 /
970 .T757C <SKIPCMD:LABEL=M9;
971 /
972 .M8 <STEP;
973 <DISP FILE:FILE=LG.LOG5.;
974 <SKIPCMD:LABEL=M9,ON=32;
975 /
976 //
977 // ***********************************************************
978 // * EXECUTION OF 5. ROUTINE SAVE WITHIN THE CURRENT QUARTER *
979 // ***********************************************************
980 /
981 <SETCFOPT:ON=15,SCOPE=GLOBAL;
982 /
983 .B5 <STEP;
984 <SKIPCMD:LABEL=T82,ON=2;
985 <SKIPCMD:LABEL=T82,ON=3;
986 <SKIPCMD:LABEL=T83,ON=4;
987 <SKIPCMD:LABEL=T85,ON=6;
988 <SKIPCMD:LABEL=M9,ON=7;
989 <SKIPCMD:LABEL=T831,ON=8;
990 <SKIPCMD:LABEL=T859,ON=1&9&10;
991 <SKIPCMD:LABEL=T855,ON=9&10;
992 <SKIPCMD:LABEL=T851,ON=9;
993 <SKIPCMD:LABEL=T853,ON=10;
994 <SKIPCMD:LABEL=T857,ON=1;
995 /
996 .T81 <STEP;
997 /
998 //
999 // ************************************
1000 // * MO TO DISK TRANSFER OF LOG FILES *

A30808-X3080-C485-5-7620 MMN:SW-COFIP-205
MMN:SW Maintenance
Software

R21AP

1001 // ************************************
1002 /
1003 <TRANS FILE:VSNS=LOGMOD,COPMOD=CHAR,FILE=LG.;
1004 <STEP;
1005 <TRANS FILE:VSNS=LOGMOD,COPMOD=BIN,FILE=LQ.;
1006 <STEP;
1007 <RSET MO:VSN=LOGMOD;
1008 /
1009 .T82 <STEP;
1010 /
1011 // ********************************
1012 // * LABELING APS ROUTINE SAVE MO *
1013 // ********************************
1014 /
1015 <INIT MO:VSN=LOGMOD,MOD=00,CD=EBC;
1016 <SKIPCMD:LABEL=AB2,ON=32;
1017 /
1018 .T83 <STEP;
1019 <SKIPCMD:LABEL=T84,ON=2;
1020 /
1021 //
1022 // *********************
1023 // * CHANGING LOG FILE *
1024 // *********************
1025 /
1026 <MOD LOGFILE:FILE=LOG6,SIZE=24,ERASE=YES;
1027 <SKIPCMD:LABEL=AB3,ON=32;
1028 /
1029 .T831 <STEP;
1030 /
1031 //
1032 // ***********************************
1033 // * DISK SAVING OF CLOSED LOG FILES *
1034 // ***********************************
1035 /
1036 <TRANS FILE:FILE=TLG.LG.LOG5./LG.LOG5.,MODE=CRD;
1037 <SKIPCMD:LABEL=AB8,ON=32;
1038 /
1039 <DISP FILE:FILE=LQ.;
1040 <SKIPCMD:LABEL=T84,ON=32;
1041 <TRANS FILE:FILE=TLG.LQ.LOG5./LQ.LOG5.,MODE=CRD;
1042 <SKIPCMD:LABEL=AB8,ON=32;
1043 /
1044 .T84 <STEP;
1045 /
1046 //
1047 // **********************************************
1048 // * CREATING GENERATION FIXPOINT ON MO STARTED *
1049 // **********************************************
1050 /

MMN:SW-COFIP-206 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

R21AP

1051 <COPY GEN:OUTPUT=FIX,VERIFY=YES,VSN=LOGMOD,REWIND=YES;

1052 <SKIPCMD:LABEL=AB4,ON=32;
1053 /
1054 //
1055 // ********************************************
1056 // * CREATING GENERATION FIXPOINT ON MO ENDED *
1057 // ********************************************
1058 /
1059 .T85 <STEP;
1060 /
1061 //
1062 // ************************************
1063 // * DISK TO MO TRANSFER OF LOG FILES *
1064 // ************************************
1065 /
1066 <DISP FILE:FILE=LG.LOG1.;
1067 <SKIPCMD:LABEL=T851,ON=32;
1068 /
1069 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LG.LOG1.;
1070 <SKIPCMD:LABEL=AB5,ON=32;
1071 <DEL FILE:FILE=LG.LOG1.;
1072 /
1073 <DISP FILE:FILE=LQ.;
1074 <SKIPCMD:LABEL=T852,ON=32;
1075 /
1076 <DISP FILE:FILE=LQ.LOG1.;
1077 <SKIPCMD:LABEL=T851B,ON=32;
1078 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LQ.LOG1.;
1079 <SKIPCMD:LABEL=AB5,ON=32;
1080 <DEL FILE:FILE=LQ.LOG1.;
1081 <SKIPCMD:LABEL=T852;
1082 /
1083 .T851 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LG.LOG1.A0/TLG.LG.LOG1.A0;
1084 <SKIPCMD:LABEL=AB9,ON=32;
1085 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LG.LOG1.A1/TLG.LG.LOG1.A1;
1086 <SKIPCMD:LABEL=AB9,ON=32;
1087 <DISP FILE:FILE=LG.LOG1.A2;
1088 <SKIPCMD:LABEL=T851A,ON=32;
1089 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LG.LOG1.A2/TLG.LG.LOG1.A2;
1090 <SKIPCMD:LABEL=AB9,ON=32;
1091 <DISP FILE:FILE=LG.LOG1.A3;
1092 <SKIPCMD:LABEL=T851A,ON=32;
1093 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LG.LOG1.A3/TLG.LG.LOG1.A3;
1094 <SKIPCMD:LABEL=AB9,ON=32;
1095 /
1096 .T851A <DISP FILE:FILE=LQ.;
1097 <SKIPCMD:LABEL=T852,ON=32;
1098 /
1099 <DISP FILE:FILE=LQ.LOG1.;
1100 <SKIPCMD:LABEL=T851B,ON=32;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-207
MMN:SW Maintenance
Software

R21AP

1101 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LQ.LOG1.;

1102 <SKIPCMD:LABEL=AB5,ON=32;
1103 <DEL FILE:FILE=LQ.LOG1.;
1104 <SKIPCMD:LABEL=T852;
1105 /
1106 .T851B <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LQ.LOG1.A1/TLG.LQ.LOG1.A1;
1107 <SKIPCMD:LABEL=AB9,ON=32;
1108 <DISP FILE:FILE=LQ.LOG1.A2;
1109 <SKIPCMD:LABEL=T852,ON=32;
1110 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LQ.LOG1.A2/TLG.LQ.LOG1.A2;
1111 <SKIPCMD:LABEL=AB9,ON=32;
1112 <DISP FILE:FILE=LQ.LOG1.A3;
1113 <SKIPCMD:LABEL=T852,ON=32;
1114 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LQ.LOG1.A3/TLG.LQ.LOG1.A3;
1115 <SKIPCMD:LABEL=AB9,ON=32;
1116 /
1117 .T852 <DISP FILE:FILE=LG.LOG2.;
1118 <SKIPCMD:LABEL=T853,ON=32;
1119 /
1120 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LG.LOG2.;
1121 <SKIPCMD:LABEL=AB5,ON=32;
1122 <DEL FILE:FILE=LG.LOG2.;
1123 /
1124 <DISP FILE:FILE=LQ.;
1125 <SKIPCMD:LABEL=T854,ON=32;
1126 <DISP FILE:FILE=LQ.LOG2.;
1127 <SKIPCMD:LABEL=T853B,ON=32;
1128 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LQ.LOG2.;
1129 <SKIPCMD:LABEL=AB5,ON=32;
1130 <DEL FILE:FILE=LQ.LOG2.;
1131 <SKIPCMD:LABEL=T854;
1132 /
1133 .T853 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LG.LOG2.A0/TLG.LG.LOG2.A0;
1134 <SKIPCMD:LABEL=AB10,ON=32;
1135 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LG.LOG2.A1/TLG.LG.LOG2.A1;
1136 <SKIPCMD:LABEL=AB10,ON=32;
1137 <DISP FILE:FILE=LG.LOG2.A2;
1138 <SKIPCMD:LABEL=T853A,ON=32;
1139 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LG.LOG2.A2/TLG.LG.LOG2.A2;
1140 <SKIPCMD:LABEL=AB10,ON=32;
1141 <DISP FILE:FILE=LG.LOG2.A3;
1142 <SKIPCMD:LABEL=T853A,ON=32;
1143 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LG.LOG2.A3/TLG.LG.LOG2.A3;
1144 <SKIPCMD:LABEL=AB10,ON=32;
1145 /
1146 .T853A <DISP FILE:FILE=LQ.;
1147 <SKIPCMD:LABEL=T854,ON=32;
1148 /
1149 <DISP FILE:FILE=LQ.LOG2.;
1150 <SKIPCMD:LABEL=T853B,ON=32;

MMN:SW-COFIP-208 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

R21AP

1151 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LQ.LOG2.;

1152 <SKIPCMD:LABEL=AB5,ON=32;
1153 <DEL FILE:FILE=LQ.LOG2.;
1154 <SKIPCMD:LABEL=T854;
1155 /
1156 .T853B <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LQ.LOG2.A1/TLG.LQ.LOG2.A1;
1157 <SKIPCMD:LABEL=AB10,ON=32;
1158 <DISP FILE:FILE=LQ.LOG2.A2;
1159 <SKIPCMD:LABEL=T854,ON=32;
1160 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LQ.LOG2.A2/TLG.LQ.LOG2.A2;
1161 <SKIPCMD:LABEL=AB10,ON=32;
1162 <DISP FILE:FILE=LQ.LOG2.A3;
1163 <SKIPCMD:LABEL=T854,ON=32;
1164 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LQ.LOG2.A3/TLG.LQ.LOG2.A3;
1165 <SKIPCMD:LABEL=AB10,ON=32;
1166 /
1167 .T854 <DISP FILE:FILE=LG.LOG3.;
1168 <SKIPCMD:LABEL=T855,ON=32;
1169 /
1170 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LG.LOG3.;
1171 <SKIPCMD:LABEL=AB5,ON=32;
1172 <DEL FILE:FILE=LG.LOG3.;
1173 /
1174 <DISP FILE:FILE=LQ.;
1175 <SKIPCMD:LABEL=T856,ON=32;
1176 <DISP FILE:FILE=LQ.LOG3.;
1177 <SKIPCMD:LABEL=T855B,ON=32;
1178 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LQ.LOG3.;
1179 <SKIPCMD:LABEL=AB5,ON=32;
1180 <DEL FILE:FILE=LQ.LOG3.;
1181 <SKIPCMD:LABEL=T856;
1182 /
1183 .T855 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LG.LOG3.A0/TLG.LG.LOG3.A0;
1184 <SKIPCMD:LABEL=AB11,ON=32;
1185 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LG.LOG3.A1/TLG.LG.LOG3.A1;
1186 <SKIPCMD:LABEL=AB11,ON=32;
1187 <DISP FILE:FILE=LG.LOG3.A2;
1188 <SKIPCMD:LABEL=T855A,ON=32;
1189 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LG.LOG3.A2/TLG.LG.LOG3.A2;
1190 <SKIPCMD:LABEL=AB11,ON=32;
1191 <DISP FILE:FILE=LG.LOG3.A3;
1192 <SKIPCMD:LABEL=T855A,ON=32;
1193 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LG.LOG3.A3/TLG.LG.LOG3.A3;
1194 <SKIPCMD:LABEL=AB11,ON=32;
1195 /
1196 .T855A <DISP FILE:FILE=LQ.;
1197 <SKIPCMD:LABEL=T856,ON=32;
1198 /
1199 <DISP FILE:FILE=LQ.LOG3.;
1200 <SKIPCMD:LABEL=T855B,ON=32;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-209
MMN:SW Maintenance
Software

R21AP

1201 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LQ.LOG3.;

1202 <SKIPCMD:LABEL=AB5,ON=32;
1203 <DEL FILE:FILE=LQ.LOG3.;
1204 <SKIPCMD:LABEL=T856;
1205 /
1206 .T855B <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LQ.LOG3.A1/TLG.LQ.LOG3.A1;
1207 <SKIPCMD:LABEL=AB11,ON=32;
1208 <DISP FILE:FILE=LQ.LOG3.A2;
1209 <SKIPCMD:LABEL=T856,ON=32;
1210 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LQ.LOG3.A2/TLG.LQ.LOG3.A2;
1211 <SKIPCMD:LABEL=AB11,ON=32;
1212 <DISP FILE:FILE=LQ.LOG3.A3;
1213 <SKIPCMD:LABEL=T856,ON=32;
1214 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LQ.LOG3.A3/TLG.LQ.LOG3.A3;
1215 <SKIPCMD:LABEL=AB11,ON=32;
1216 /
1217 .T856 <DISP FILE:FILE=LG.LOG4.;
1218 <SKIPCMD:LABEL=T857,ON=32;
1219 /
1220 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LG.LOG4.;
1221 <SKIPCMD:LABEL=AB5,ON=32;
1222 <DEL FILE:FILE=LG.LOG4.;
1223 /
1224 <DISP FILE:FILE=LQ.;
1225 <SKIPCMD:LABEL=T858,ON=32;
1226 <DISP FILE:FILE=LQ.LOG4.;
1227 <SKIPCMD:LABEL=T857B,ON=32;
1228 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LQ.LOG4.;
1229 <SKIPCMD:LABEL=AB5,ON=32;
1230 <DEL FILE:FILE=LQ.LOG4.;
1231 <SKIPCMD:LABEL=T858;
1232 /
1233 .T857 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LG.LOG4.A0/TLG.LG.LOG4.A0;
1234 <SKIPCMD:LABEL=AB12,ON=32;
1235 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LG.LOG4.A1/TLG.LG.LOG4.A1;
1236 <SKIPCMD:LABEL=AB12,ON=32;
1237 <DISP FILE:FILE=LG.LOG4.A2;
1238 <SKIPCMD:LABEL=T857A,ON=32;
1239 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LG.LOG4.A2/TLG.LG.LOG4.A2;
1240 <SKIPCMD:LABEL=AB12,ON=32;
1241 <DISP FILE:FILE=LG.LOG4.A3;
1242 <SKIPCMD:LABEL=T857A,ON=32;
1243 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LG.LOG4.A3/TLG.LG.LOG4.A3;
1244 <SKIPCMD:LABEL=AB12,ON=32;
1245 /
1246 .T857A <DISP FILE:FILE=LQ.;
1247 <SKIPCMD:LABEL=T858,ON=32;
1248 /
1249 <DISP FILE:FILE=LQ.LOG4.;
1250 <SKIPCMD:LABEL=T857B,ON=32;

MMN:SW-COFIP-210 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

R21AP

1251 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LQ.LOG4.;

1252 <SKIPCMD:LABEL=AB5,ON=32;
1253 <DEL FILE:FILE=LQ.LOG4.;
1254 <SKIPCMD:LABEL=T858;
1255 /
1256 .T857B <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LQ.LOG4.A1/TLG.LQ.LOG4.A1;
1257 <SKIPCMD:LABEL=AB12,ON=32;
1258 <DISP FILE:FILE=LQ.LOG4.A2;
1259 <SKIPCMD:LABEL=T858,ON=32;
1260 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LQ.LOG4.A2/TLG.LQ.LOG4.A2;
1261 <SKIPCMD:LABEL=AB12,ON=32;
1262 <DISP FILE:FILE=LQ.LOG4.A3;
1263 <SKIPCMD:LABEL=T858,ON=32;
1264 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LQ.LOG4.A3/TLG.LQ.LOG4.A3;
1265 <SKIPCMD:LABEL=AB12,ON=32;
1266 /
1267 .T858 <DISP FILE:FILE=LG.LOG5.;
1268 <SKIPCMD:LABEL=T859,ON=32;
1269 /
1270 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LG.LOG5.;
1271 <SKIPCMD:LABEL=AB5,ON=32;
1272 <DEL FILE:FILE=LG.LOG5.;
1273 /
1274 <DISP FILE:FILE=LQ.;
1275 <SKIPCMD:LABEL=T859C,ON=32;
1276 <DISP FILE:FILE=LQ.LOG5.;
1277 <SKIPCMD:LABEL=T859B,ON=32;
1278 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LQ.LOG5.;
1279 <SKIPCMD:LABEL=AB5,ON=32;
1280 <DEL FILE:FILE=LQ.LOG5.;
1281 <SKIPCMD:LABEL=T859C;
1282 /
1283 .T859 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LG.LOG5.A0/TLG.LG.LOG5.A0;
1284 <SKIPCMD:LABEL=AB13,ON=32;
1285 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LG.LOG5.A1/TLG.LG.LOG5.A1;
1286 <SKIPCMD:LABEL=AB13,ON=32;
1287 <DISP FILE:FILE=LG.LOG5.A2;
1288 <SKIPCMD:LABEL=T859A,ON=32;
1289 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LG.LOG5.A2/TLG.LG.LOG5.A2;
1290 <SKIPCMD:LABEL=AB13,ON=32;
1291 <DISP FILE:FILE=LG.LOG5.A3;
1292 <SKIPCMD:LABEL=T859A,ON=32;
1293 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LG.LOG5.A3/TLG.LG.LOG5.A3;
1294 <SKIPCMD:LABEL=AB13,ON=32;
1295 /
1296 .T859A <DISP FILE:FILE=LQ.;
1297 <SKIPCMD:LABEL=T859C,ON=32;
1298 /
1299 <DISP FILE:FILE=LQ.LOG5.;
1300 <SKIPCMD:LABEL=T859B,ON=32;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-211
MMN:SW Maintenance
Software

R21AP

1301 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LQ.LOG5.;

1302 <SKIPCMD:LABEL=AB5,ON=32;
1303 <DEL FILE:FILE=LQ.LOG5.;
1304 <SKIPCMD:LABEL=T859C;
1305 /
1306 .T859B <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LQ.LOG5.A1/TLG.LQ.LOG5.A1;
1307 <SKIPCMD:LABEL=AB13,ON=32;
1308 <DISP FILE:FILE=LQ.LOG5.A2;
1309 <SKIPCMD:LABEL=T859C,ON=32;
1310 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LQ.LOG5.A2/TLG.LQ.LOG5.A2;
1311 <SKIPCMD:LABEL=AB13,ON=32;
1312 <DISP FILE:FILE=LQ.LOG5.A3;
1313 <SKIPCMD:LABEL=T859C,ON=32;
1314 <TRANS FILE:VSNR=LOGMOD,COPMOD=SSWF,FILE=LQ.LOG5.A3/TLG.LQ.LOG5.A3;
1315 <SKIPCMD:LABEL=AB13,ON=32;
1316 /
1317 .T859C <SKIPCMD:LABEL=M9;
1318 /
1319 .M9 <STEP;
1320 <RSET MO:VSN=LOGMOD;
1321 /
1322 //
1323 // *************************************************
1324 // * CREATING FALL BACK GENERATION ON DISK STARTED *
1325 // *************************************************
1326 /
1327 <COPY GEN:OUTPUT=GEN,VERIFY=YES,VSN=SYSVSN;
1328 <SKIPCMD:LABEL=AB6,ON=32;
1329 /
1330 //
1331 // ***********************************************
1332 // * CREATING FALL BACK GENERATION ON DISK ENDED *
1333 // ***********************************************
1334 /
1335 .MA <STEP;
1336 <ACT FNS:FNS=LG;
1337 /
1338 <DISP FILE:FILE=LQ.;
1339 <SKIPCMD:LABEL=MB,ON=32;
1340 <ACT FNS:FNS=LQ;
1341 /
1342 .MB <STEP;
1343 /
1344 //
1345 // ****************************************************
1346 // * DISPLAYING GENERATION STATUS AND LOG FILE STATUS *
1347 // ****************************************************
1348 /
1349 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
1350 <DISP GEN:DISPL=LIST;

MMN:SW-COFIP-212 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

R21AP

1351 <DISP GEN:DISPL=FILES;

1352 <STAT LOG;
1353 <DISP FILE:FILE=LG.;
1354 <DISP FILE:FILE=LQ.;
1355 <DISP FILE:FILE=TLG.;
1356 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
1357 /
1358 <SKIPCMD:LABEL=TC6;
1359 /
1360 /
1361 /
1362 .TC6 <STEP;
1363 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
1364 //
1365 // ****************************************
1366 // * LISTING APS ROUTINE SAVE MO CONTENTS *
1367 // ****************************************
1368 //
1369 <DISP GEN:VSN=LOGMOD;
1370 <DISP FILE:VSN=LOGMOD;
1371 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
1372 /
1373 <SKIPCMD:LABEL=OUT;
1374 /
1375 / *******************************
1376 / * FAULT EXITS AND END MESSAGE *
1377 / *******************************
1378 /
1379 .AB2 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
1380 // ****************
1381 // *** FAULT 02 ***
1382 // ****************
1383 //
1384 // **************************************************
1385 // *** LABELING APS ROUTINE SAVE MO ***
1386 // *** NOT EXECUTED. ***
1387 // *** ***
1388 // *** MOD STATION IS DEFECTIVE OR MO IS DAMAGED: ***
1389 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
1390 // *** ***
1391 // *** START COMMAND FILE CG.SA.R21AP AGAIN. ***
1392 // **************************************************
1393 /
1394 /
1395 <RSET MO:VSN=LOGMOD;
1396 /
1397 <SETCFOPT:OFF=1&2&4&&10,ON=3,SCOPE=GLOBAL;
1398 <SKIPCMD:LABEL=END;
1399 /
1400 .AB3 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-213
MMN:SW Maintenance
Software

R21AP

1401 // ****************
1402 // *** FAULT 03 ***
1403 // ****************
1404 //
1405 // **********************************************
1406 // *** CHANGING LOG FILE NOT EXECUTED. ***
1407 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
1408 // *** ***
1409 // *** START COMMAND FILE CG.SA.R21AP AGAIN. ***
1410 // **********************************************
1411 /
1412 <SETCFOPT:OFF=1&&3&5&&10,ON=4,SCOPE=GLOBAL;
1413 <SKIPCMD:LABEL=END;
1414 /
1415 .AB4 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
1416 // ****************
1417 // *** FAULT 04 ***
1418 // ****************
1419 //
1420 // *****************************************************
1421 // *** CREATING GENERATION FIXPOINT ON MO ***
1422 // *** NOT EXECUTED. ***
1423 // *** MOD STATION IS DEFECTIVE OR MO IS DAMAGED OR ***
1424 // *** CHECKSUM AUDIT ERROR OF ONE OR MORE ***
1425 // *** GENERATION FILE(S) DETECTED: ***
1426 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
1427 // *** ***
1428 // *** ***
1429 // *** (IF NECESSARY FAULT CLEARANCE IS TO BE DONE ***
1430 // *** ACCORDING TO MMN:SW PROCEDURE SW500.) ***
1431 // *** ******************************************* ***
1432 // *** ***
1433 // *** EVALUATE CHECKSUM AUDIT ERROR ALARM MASK, ***
1434 // *** REPAIR FILE(S) NECESSARY. ***
1435 // *** ***
1436 // *** START COMMAND FILE CG.SA.R21AP AGAIN. ***
1437 // *****************************************************
1438 /
1439 /
1440 /
1441 <RSET MO:VSN=LOGMOD;
1442 /
1443 <SETCFOPT:OFF=1&3&&10,ON=2,SCOPE=GLOBAL;
1444 <SKIPCMD:LABEL=END;
1445 /
1446 .AB5 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
1447 // ****************
1448 // *** FAULT 05 ***
1449 // ****************
1450 //

MMN:SW-COFIP-214 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

R21AP

1451 // ***************************************************
1452 // *** DISK TO MO TRANSFER OF LOG FILES ***
1453 // *** NOT EXECUTED. ***
1454 // *** MOD STATION IS DEFECTIVE OR MO IS DAMAGED: ***
1455 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
1456 // *** ***
1457 // *** START COMMAND FILE CG.SA.R21AP AGAIN. ***
1458 // ***************************************************
1459 /
1460 /
1461 /
1462 <DEL FILE:FILE=LG.LOG1.A0,VSN=LOGMOD;
1463 <STEP;
1464 <DEL FILE:FILE=LG.LOG1.A1,VSN=LOGMOD;
1465 <STEP;
1466 <DEL FILE:FILE=LG.LOG1.A2,VSN=LOGMOD;
1467 <STEP;
1468 <DEL FILE:FILE=LG.LOG1.A3,VSN=LOGMOD;
1469 <STEP;
1470 <DEL FILE:FILE=LQ.LOG1.A1,VSN=LOGMOD;
1471 <STEP;
1472 <DEL FILE:FILE=LQ.LOG1.A2,VSN=LOGMOD;
1473 <STEP;
1474 <DEL FILE:FILE=LQ.LOG1.A3,VSN=LOGMOD;
1475 <STEP;
1476 /
1477 <SETCFOPT:OFF=1&&5&7&&10,ON=6,SCOPE=GLOBAL;
1478 <SKIPCMD:LABEL=END;
1479 /
1480 .AB6 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
1481 // ****************
1482 // *** FAULT 06 ***
1483 // ****************
1484 //
1485 // ***************************************************
1486 // *** CREATING FALL BACK GENERATION ON DISK ***
1487 // *** NOT EXECUTED. ***
1488 // *** ***
1489 // *** POSSIBLY CHECKSUM AUDIT ERROR OF ONE OR ***
1490 // *** MORE GENERATION FILE(S) DETECTED: ***
1491 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
1492 // *** ***
1493 // *** (IF NECESSARY FAULT CLEARANCE IS TO BE DONE ***
1494 // *** ACCORDING TO MMN:SW PROCEDURE SW500.) ***
1495 // *** ******************************************* ***
1496 // *** ***
1497 // *** EVALUATE CHECKSUM AUDIT ERROR ALARM MASK, ***
1498 // *** REPAIR FILE(S) NECESSARY. ***
1499 // *** ***
1500 // *** START COMMAND FILE CG.SA.R21AP AGAIN. ***

A30808-X3080-C485-5-7620 MMN:SW-COFIP-215
MMN:SW Maintenance
Software

R21AP

1501 // ***************************************************
1502 /
1503 /
1504 /
1505 <SETCFOPT:OFF=1&&6&8&&10,ON=7,SCOPE=GLOBAL;
1506 <SKIPCMD:LABEL=END;
1507 /
1508 .AB8 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
1509 // ****************
1510 // *** FAULT 08 ***
1511 // ****************
1512 //
1513 // **********************************************
1514 // *** DISK SAVING OF CLOSED LOG FILES ***
1515 // *** NOT EXECUTED. ***
1516 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
1517 // *** ***
1518 // *** START COMMAND FILE CG.SA.R21AP AGAIN. ***
1519 // **********************************************
1520 /
1521 /
1522 <SETCFOPT:OFF=1&&7&9&10,ON=8,SCOPE=GLOBAL;
1523 <SKIPCMD:LABEL=END;
1524 /
1525 .AB9 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
1526 // ****************
1527 // *** FAULT 09 ***
1528 // ****************
1529 //
1530 // **********************************************
1531 // *** DISK TO MO TRANSFER OF LOG1 FILES ***
1532 // *** NOT EXECUTED. ***
1533 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
1534 // *** ***
1535 // *** START COMMAND FILE CG.SA.R21AP AGAIN. ***
1536 // **********************************************
1537 /
1538 /
1539 <SETCFOPT:OFF=1&&8&10,ON=9,SCOPE=GLOBAL;
1540 <SKIPCMD:LABEL=END;
1541 /
1542 .AB10 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
1543 // ****************
1544 // *** FAULT 10 ***
1545 // ****************
1546 //
1547 // **********************************************
1548 // *** DISK TO MO TRANSFER OF LOG2 FILES ***
1549 // *** NOT EXECUTED. ***
1550 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***

MMN:SW-COFIP-216 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

R21AP

1551 // *** ***

1552 // *** START COMMAND FILE CG.SA.R21AP AGAIN. ***
1553 // **********************************************
1554 /
1555 /
1556 <SETCFOPT:OFF=1&&9,ON=10,SCOPE=GLOBAL;
1557 <SKIPCMD:LABEL=END;
1558 /
1559 .AB11 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
1560 // ****************
1561 // *** FAULT 11 ***
1562 // ****************
1563 //
1564 // **********************************************
1565 // *** DISK TO MO TRANSFER OF LOG3 FILES ***
1566 // *** NOT EXECUTED. ***
1567 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
1568 // *** ***
1569 // *** START COMMAND FILE CG.SA.R21AP AGAIN. ***
1570 // **********************************************
1571 /
1572 /
1573 <SETCFOPT:OFF=1&&8,ON=9&10,SCOPE=GLOBAL;
1574 <SKIPCMD:LABEL=END;
1575 /
1576 .AB12 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
1577 // ****************
1578 // *** FAULT 12 ***
1579 // ****************
1580 //
1581 // **********************************************
1582 // *** DISK TO MO TRANSFER OF LOG4 FILES ***
1583 // *** NOT EXECUTED. ***
1584 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
1585 // *** ***
1586 // *** START COMMAND FILE CG.SA.R21AP AGAIN. ***
1587 // **********************************************
1588 /
1589 /
1590 <SETCFOPT:OFF=2&&10,ON=1,SCOPE=GLOBAL;
1591 <SKIPCMD:LABEL=END;
1592 /
1593 .AB13 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
1594 // ****************
1595 // *** FAULT 13 ***
1596 // ****************
1597 //
1598 // **********************************************
1599 // *** DISK TO MO TRANSFER OF LOG5 FILES ***
1600 // *** NOT EXECUTED. ***

A30808-X3080-C485-5-7620 MMN:SW-COFIP-217
MMN:SW Maintenance
Software

R21AP

1601 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***

1602 // *** ***
1603 // *** START COMMAND FILE CG.SA.R21AP AGAIN. ***
1604 // **********************************************
1605 /
1606 /
1607 <SETCFOPT:OFF=2&&8,ON=1&9&10,SCOPE=GLOBAL;
1608 <SKIPCMD:LABEL=END;
1609 /
1610 .OUT <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
1611 /
1612 // ****************
1613 // *** FINISHED ***
1614 // ****************
1615 //
1616 // *****************************************************************
1617 // *** THE DISPLAYED MO CONTENTS IS TO BE COMPARED WITH THE ***
1618 // *** DESIRED CONTENTS (SEE SAVING SCHEDULE IN SW210). ***
1619 // *** AFTER THAT ONE HAS TO DECIDE WHETHER OR NOT THE ROUTINE ***
1620 // *** SAVING WAS SUCCESSFUL: ***
1621 // *** ***
1622 // *** ***
1623 // *** FAULT FREE: THE ACTUAL AND THE EXPECTED MO CONTENTS ***
1624 // *** =========== (AT THE TIME ROUTINE SAVING IS EXECUTED) ***
1625 // *** ARE IDENTICAL. ***
1626 // *** ***
1627 // *** ***
1628 // *** FAULTY: DEVIATIONS FROM THE EXPECTED MO CONTENTS: ***
1629 // *** ======= ***
1630 // *** ***
1631 // *** 1. THE WHOLE MO CONTENTS OR THE FIXPOINT IS DESTROYED: ***
1632 // *** ------------------------------------------------------ ***
1633 // *** ***
1634 // *** MEASURES: ***
1635 // *** ***
1636 // *** - UNMOUNT MO AND MARK AS DEFECTIVE. ***
1637 // *** - MOUNT A NEW AND TESTED MO AND INITIALIZE AS LOGMOD: ***
1638 // *** ***
1639 // *** CONF MOD:MOD=00,OST=MBL; ***
1640 // *** DIAG MOD:MOD=00,LABELMO=YES; ***
1641 // *** CONF MOD:MOD=00,OST=ACT; ***
1642 // *** ***
1643 // *** INIT MO:MOD=00,CD=EBC,VSN=LOGMOD; ***
1644 // *** ***
1645 // *** - THE NEXT ROUTINE OR QUARTERLY SAVING ACCORDING TO THE ***
1646 // *** SAVING SCHEDULE IS TO BE CARRIED OUT IMMEDIATELY. ***
1647 // *** ***
1648 // *** 2. LOG FILE(S) ARE FAULTY OR MISSING: ***
1649 // *** ------------------------------------- ***
1650 // *** ***

MMN:SW-COFIP-218 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

R21AP

1651 // *** MEASURES: ***

1652 // *** ***
1653 // *** TRANSFER ALL MISSING LOG FILES FROM DISK TO LOGMOD ***
1654 // *** (RENAME TLG.LG(LQ). FILES ON DISK INTO THE ***
1655 // *** CORRESPONDING LG(LQ). FILES ON MO): ***
1656 // *** ***
1657 // *** TRANS FILE:FILE=LG(LQ).LOGx.Ax/TLG.LG(LQ).LOGx.Ax, ***
1658 // *** VSNR=LOGMOD,COPMOD=SSWF; ***
1659 // *** ***
1660 // *** NOTE: ***
1661 // *** ----- ***
1662 // *** IF, AFTER REPAIRING THE MO CONTENTS, NEW PROBLEMS ***
1663 // *** OCCUR WITH THAT MO, THE MEASURES DESCRIBED UNDER ***
1664 // *** POINT 1 ARE TO BE CARRIED OUT. ***
1665 // *** ***
1666 // *****************************************************************
1667 //
1668 // ***************************************
1669 // *** APS ROUTINE SAVING IS FINISHED. ***
1670 // ***************************************
1671 /
1672 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
1673 <SKIPCMD:LABEL=END;
1674 /
1675 .OUT1 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
1676 /
1677 // ****************************
1678 // *** FINISHED WITH FAULTS ***
1679 // ****************************
1680 //
1681 // *********************************************************
1682 // *** APS ROUTINE SAVING HAS BEEN INTERRUPTED BECAUSE ***
1683 // *** APS QUARTERLY SAVING IS SCHEDULED. ***
1684 // *** ***
1685 // *** EXECUTE PROCEDURE SW210 FOR APS ROUTINE SAVING. ***
1686 // *********************************************************
1687 /
1688 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
1689 <SKIPCMD:LABEL=END;
1690 /
1691 .OUT2 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
1692 /
1693 // ****************************
1694 // *** FINISHED WITH FAULTS ***
1695 // ****************************
1696 //
1697 // **********************************************
1698 // *** NO LOG FILE FOR ROUTINE SAVING EXISTS. ***
1699 // *** APS ROUTINE SAVING WAS INTERRUPTED. ***
1700 // **********************************************

A30808-X3080-C485-5-7620 MMN:SW-COFIP-219
MMN:SW Maintenance
Software

R21AP

1701 /
1702 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
1703 <SKIPCMD:LABEL=END;
1704 /
1705 .OUT3 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
1706 /
1707 // ****************************
1708 // *** FINISHED WITH FAULTS ***
1709 // ****************************
1710 //
1711 // *********************************************************
1712 // *** APS ROUTINE SAVING HAS BEEN INTERRUPTED BECAUSE ***
1713 // *** APS QUARTERLY SAVING PART 2 IS SCHEDULED. ***
1714 // *** ***
1715 // *** START COMMAND FILE CG.SA.Q22AP. ***
1716 // *********************************************************
1717 /
1718 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
1719 <SKIPCMD:LABEL=END;
1720 /
1721 .END <SETCFOPT:ACKCFS=ERROR,DANCMD=NOEXEC,ACKREQ=NEG,SCOPE=GLOBAL;
1722 <ENDFILE;

MMN:SW-COFIP-220 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

RCAMA

1 <CMDFILE;
2 /
3 // 80-RCAMA-01
4 /
5 /****V01***************************************************************
6 /* *
7 /* COMMAND FILE CG.SA.RCAMA FOR RECORDING OF AMA DATA *
8 /* ================================================== *
9 /* *
10 /* TASK DESCRIPTION: *
11 /* ----------------- *
12 /* - RECORDING OF INDIVIDUAL CALL DATA *
13 /* *
14 /* HOLD TAPE READY/ LOADING MAGNETIC TAPE DEVICE: *
15 /* ---------------------------------------------- *
16 /* - TWO LARGE TAPES WITH WRITE RING ARE TO BE HELD READY *
17 /* - BEFORE STARTING THE COMMAND FILE THE MAGNETIC TAPE *
18 /* DEVICE IS TO BE LOADED AND SWITCHED TO ONLINE *
19 /* *
20 /* FAULT HANDLING: *
21 /* ----------------- *
22 /* - AFTER INTERRUPTION OF THE FILE PROCESSING VIA FAULT *
23 /* EXITS AND CORRESPONDING FAULT HANDLING THE FILE CAN *
24 /* BE STARTED AGAIN *
25 /* *
26 /* SWITCH PRESETTINGS FOR START POINTS AND ENTRY POINTS: *
27 /* ===================================================== *
28 /* START POINT SWITCH PRESETTINGS *
29 /* ----------- ------------------ *
30 /* RESETCFOPT; *
31 /* *
32 /* ENTRY POINT SWITCH PRESETTINGS *
33 /* ------------ ------------------ *
34 /* M1 SETCFOPT:OFF=1&&11,SCOPE=GLOBAL; *
35 /* M3 SETCFOPT:OFF=1&3&&11,ON=2,SCOPE=GLOBAL; *
36 /* M7 SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL; *
37 /* *
38 /* FAULT 01 SETCFOPT:OFF=1&&11,SCOPE=GLOBAL; *
39 /* FAULT 02,03 SETCFOPT:OFF=1&3&&11,ON=2,SCOPE=GLOBAL; *
40 /* FAULT 04,05 SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL; *
41 /* *
42 /**********************************************************************
43 /
44 <SETCFOPT:ACKCFS=ERROR,DANCMD=EXEC,ACKREQ=POS,SCOPE=GLOBAL;
45 /
46 <SKIPCMD:LABEL=END,ON=1;
47 <SKIPCMD:LABEL=M3,ON=2;
48 <SKIPCMD:LABEL=M7,ON=3;
49 /
50 .M1 <STEP;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-221
MMN:SW Maintenance
Software

RCAMA

51 // ***************************
52 // * DISK SAVING OF AMA DATA *
53 // ***************************
54 /
55 <TRANS BUFFER:TYPE=AMA;
56 <SKIPCMD:LABEL=AB1,ON=32;
57 /
58 .M2 <STEP;
59 // ***********************************
60 // * DISPLAYING AMA DATA FILE STATUS *
61 // ***********************************
62 /
63 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
64 <DISP FILE:FILE=IA.ICAMA,ALL;
65 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
66 /
67 .M3 <STEP;
68 // ********************************************
69 // * LABELING AMA DATA RECORD TAPE (ORIGINAL) *
70 // ********************************************
71 /
72 <INIT MT:VSN=VSNNR1,MTD=00,CD=ISO,DENS=6250;
73 <SKIPCMD:LABEL=AB2,ON=32;
74 /
75 .M4 <STEP;
76 // *****************************************
77 // * RECORDING AMA DATA (ORIGINAL) STARTED *
78 // *****************************************
79 /
80 <TRANS FILE:VSNR=VSNNR1,FILE=KDEDATA.EWSD/IA.ICAMA,COPMOD=POST;
81 <SKIPCMD:LABEL=AB3,ON=32;
82 /
83 <REWIND MT:VSN=VSNNR1;
84 /
85 .M5 <STEP;
86 // ***************************************
87 // * RECORDING AMA DATA (ORIGINAL) ENDED *
88 // ***************************************
89 /
90 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
91 <DISP FILE:VSN=VSNNR1;
92 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
93 /
94 .M6 <STEP;
95 /
96 // *******************************************
97 // * REMOVE AMA DATA RECORD TAPE (ORIGINAL), *
98 // * MOUNT A LARGE TAPE WITH WRITE RING *
99 // * FOR RECORDING AMA DATA (COPY). *
100 // * *

MMN:SW-COFIP-222 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

RCAMA

101 // * START COMMAND FILE CG.SA.RCAMA AGAIN. *

102 // *******************************************
103 /
104 <SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL;
105 <SKIPCMD:LABEL=END;
106 /
107 .M7 <STEP;
108 // ****************************************
109 // * LABELING AMA DATA RECORD TAPE (COPY) *
110 // ****************************************
111 /
112 <INIT MT:VSN=VSNNR2,MTD=00,CD=ISO,DENS=6250;
113 <SKIPCMD:LABEL=AB4,ON=32;
114 /
115 .M8 <STEP;
116 // *************************************
117 // * RECORDING AMA DATA (COPY) STARTED *
118 // *************************************
119 /
120 <TRANS FILE:VSNR=VSNNR2,FILE=KDEDATA.EWSD/IA.ICAMA,COPMOD=POST;
121 <SKIPCMD:LABEL=AB5,ON=32;
122 /
123 <REWIND MT:VSN=VSNNR2;
124 /
125 .M9 <STEP;
126 // ***********************************
127 // * RECORDING AMA DATA (COPY) ENDED *
128 // ***********************************
129 /
130 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
131 <DISP FILE:VSN=VSNNR2;
132 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
133 /
134 .MA <STEP;
135 // ************************************************
136 // * RELEASING RECORDED FILE AREA FOR OVERWRITING *
137 // ************************************************
138 /
139 <REL CYCFILE:FILE=IA.ICAMA;
140 /
141 .MB <STEP;
142 // ***********************************
143 // * DISPLAYING AMA DATA FILE STATUS *
144 // ***********************************
145 /
146 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
147 <DISP FILE:FILE=IA.ICAMA,ALL;
148 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
149 /
150 <SKIPCMD:LABEL=OUT;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-223
MMN:SW Maintenance
Software

RCAMA

151 / *******************************
152 / * FAULT EXITS AND END MESSAGE *
153 / *******************************
154 /
155 .AB1 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
156 <DISP FILE:FILE=IA.ICAMA,ALL;
157 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
158 // ****************
159 // *** FAULT 01 ***
160 // ****************
161 // **********************************************
162 // *** DISK SAVING OF AMA DATA NOT EXECUTED. ***
163 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
164 // *** ***
165 // *** START COMMAND FILE CG.SA.RCAMA AGAIN. ***
166 // **********************************************
167 /
168 <SETCFOPT:OFF=1&&11,SCOPE=GLOBAL;
169 <SKIPCMD:LABEL=END;
170 /
171 .AB2 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
172 // ****************
173 // *** FAULT 02 ***
174 // ****************
175 // **********************************************
176 // *** LABELING OF AMA DATA RECORD TAPE ***
177 // *** (ORIGINAL) NOT EXECUTED. ***
178 // *** TAPE DEVICE OFFLINE OR DEFECTIVE OR ***
179 // *** TAPE DAMAGED: ***
180 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
181 // *** ***
182 // *** START COMMAND FILE CG.SA.RCAMA AGAIN. ***
183 // **********************************************
184 /
185 <SETCFOPT:OFF=1&3&&11,ON=2,SCOPE=GLOBAL;
186 <SKIPCMD:LABEL=END;
187 /
188 .AB3 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
189 // ****************
190 // *** FAULT 03 ***
191 // ****************
192 // **********************************************
193 // *** RECORDING OF AMA DATA (ORIGINAL) ***
194 // *** NOT EXECUTED. ***
195 // *** ***
196 // *** CASE 1: ***
197 // *** ======= ***
198 // *** TAPE DAMAGED OR FILE NOT AVAILABLE, ***
199 // *** CHECK PREREQUISITES, ELIMINATE FAULTS, ***
200 // *** ***

MMN:SW-COFIP-224 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

RCAMA

201 // *** START COMMAND FILE CG.SA.RCAMA AGAIN. ***

202 // *** ***
203 // *** CASE 2: ***
204 // *** ======= ***
205 // *** CORRESPONDING BACKGROUND MEMORY FILE ***
206 // *** IS EMPTY, ***
207 // *** CHECK PREREQUISITES: ***
208 // *** COMMAND TRANS FILE WAS NOT EXECUTED, ***
209 // *** ERROR: L FC 33. ***
210 // *** ***
211 // *** RECORDING OF AMA DATA IMPOSSIBLE. ***
212 // *** ***
213 // *** PROCEDURE IS FINISHED. ***
214 // **********************************************
215 /
216 <REWIND MT:VSN=VSNNR1;
217 /
218 <SETCFOPT:OFF=1&3&&11,ON=2,SCOPE=GLOBAL;
219 <SKIPCMD:LABEL=END;
220 /
221 .AB4 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
222 // ****************
223 // *** FAULT 04 ***
224 // ****************
225 // **********************************************
226 // *** LABELING OF AMA DATA RECORD TAPE ***
227 // *** (COPY) NOT EXECUTED. ***
228 // *** TAPE DEVICE OFFLINE OR DEFECTIVE OR ***
229 // *** TAPE DAMAGED: ***
230 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
231 // *** ***
232 // *** START COMMAND FILE CG.SA.RCAMA AGAIN. ***
233 // **********************************************
234 /
235 <SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL;
236 <SKIPCMD:LABEL=END;
237 /
238 .AB5 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
239 // ****************
240 // *** FAULT 05 ***
241 // ****************
242 // **********************************************
243 // *** RECORDING OF AMA DATA (COPY) ***
244 // *** NOT EXECUTED. ***
245 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
246 // *** ***
247 // *** START COMMAND FILE CG.SA.RCAMA AGAIN. ***
248 // **********************************************
249 /
250 <REWIND MT:VSN=VSNNR2;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-225
MMN:SW Maintenance
Software

RCAMA

251 /
252 <SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL;
253 <SKIPCMD:LABEL=END;
254 /
255 .OUT <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
256 /
257 // *******************************
258 // *** FINISHED WITHOUT FAULTS ***
259 // *******************************
260 // *******************************************
261 // *** REMOVE AMA DATA RECORD TAPE (COPY). ***
262 // *** ***
263 // *** AMA DATA RECORDING IS FINISHED. ***
264 // *******************************************
265 /
266 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
267 <SKIPCMD:LABEL=END;
268 /
269 .END <SETCFOPT:ACKCFS=ERROR,DANCMD=NOEXEC,ACKREQ=NEG,SCOPE=GLOBAL;
270 <ENDFILE;

MMN:SW-COFIP-226 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

RCDNB

1 <CMDFILE;
2 /
3 // 80-RCDNB-01
4 /
5 /****V01***************************************************************
6 /* *
7 /* COMMAND FILE CG.SA.RCDNB FOR RECORDING OF DNB DATA *
8 /* ================================================== *
9 /* *
10 /* TASK DESCRIPTION: *
11 /* ----------------- *
12 /* - RECORDING OF SUBSCRIBER OBSERVATION DATA *
13 /* *
14 /* HOLD TAPE READY/ LOADING MAGNETIC TAPE DEVICE: *
15 /* ---------------------------------------------- *
16 /* - TWO LARGE TAPES WITH WRITE RING ARE TO BE HELD READY *
17 /* - BEFORE STARTING THE COMMAND FILE THE MAGNETIC TAPE *
18 /* DEVICE IS TO BE LOADED AND SWITCHED TO ONLINE *
19 /* *
20 /* FAULT HANDLING: *
21 /* ----------------- *
22 /* - AFTER INTERRUPTION OF THE FILE PROCESSING VIA FAULT *
23 /* EXITS AND CORRESPONDING FAULT HANDLING THE FILE CAN *
24 /* BE STARTED AGAIN *
25 /* *
26 /* SWITCH PRESETTINGS FOR START POINTS AND ENTRY POINTS: *
27 /* ===================================================== *
28 /* START POINT SWITCH PRESETTINGS *
29 /* ----------- ------------------ *
30 /* RESETCFOPT; *
31 /* *
32 /* ENTRY POINT SWITCH PRESETTINGS *
33 /* ------------ ------------------ *
34 /* M1 SETCFOPT:OFF=1&&11,SCOPE=GLOBAL; *
35 /* M3 SETCFOPT:OFF=1&3&&11,ON=2,SCOPE=GLOBAL; *
36 /* M7 SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL; *
37 /* *
38 /* FAULT 01 SETCFOPT:OFF=1&&11,SCOPE=GLOBAL; *
39 /* FAULT 02,03 SETCFOPT:OFF=1&3&&11,ON=2,SCOPE=GLOBAL; *
40 /* FAULT 04,05 SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL; *
41 /* *
42 /**********************************************************************
43 /
44 <SETCFOPT:ACKCFS=ERROR,DANCMD=EXEC,ACKREQ=POS,SCOPE=GLOBAL;
45 /
46 <SKIPCMD:LABEL=END,ON=1;
47 <SKIPCMD:LABEL=M3,ON=2;
48 <SKIPCMD:LABEL=M7,ON=3;
49 /
50 .M1 <STEP;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-227
MMN:SW Maintenance
Software

RCDNB

51 // ***************************
52 // * DISK SAVING OF DNB DATA *
53 // ***************************
54 /
55 <TRANS BUFFER:TYPE=DNOB;
56 <SKIPCMD:LABEL=AB1,ON=32;
57 /
58 .M2 <STEP;
59 // ***********************************
60 // * DISPLAYING DNB DATA FILE STATUS *
61 // ***********************************
62 /
63 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
64 <DISP FILE:FILE=IA.ICDNB,ALL;
65 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
66 /
67 .M3 <STEP;
68 // ********************************************
69 // * LABELING DNB DATA RECORD TAPE (ORIGINAL) *
70 // ********************************************
71 /
72 <INIT MT:VSN=VSNNR1,MTD=00,CD=ISO,DENS=6250;
73 <SKIPCMD:LABEL=AB2,ON=32;
74 /
75 .M4 <STEP;
76 // *****************************************
77 // * RECORDING DNB DATA (ORIGINAL) STARTED *
78 // *****************************************
79 /
80 <TRANS FILE:VSNR=VSNNR1,FILE=KDEDATA.EWSD/IA.ICDNB,COPMOD=POST;
81 <SKIPCMD:LABEL=AB3,ON=32;
82 /
83 <REWIND MT:VSN=VSNNR1;
84 /
85 .M5 <STEP;
86 // ***************************************
87 // * RECORDING DNB DATA (ORIGINAL) ENDED *
88 // ***************************************
89 /
90 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
91 <DISP FILE:VSN=VSNNR1;
92 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
93 /
94 .M6 <STEP;
95 // *******************************************
96 // * REMOVE DNB DATA RECORD TAPE (ORIGINAL), *
97 // * MOUNT A LARGE TAPE WITH WRITE RING *
98 // * FOR RECORDING DNB DATA (COPY). *
99 // * *
100 // * START COMMAND FILE CG.SA.RCDNB AGAIN. *

MMN:SW-COFIP-228 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

RCDNB

101 // *******************************************
102 /
103 <SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL;
104 <SKIPCMD:LABEL=END;
105 /
106 .M7 <STEP;
107 // ****************************************
108 // * LABELING DNB DATA RECORD TAPE (COPY) *
109 // ****************************************
110 /
111 <INIT MT:VSN=VSNNR2,MTD=00,CD=ISO,DENS=6250;
112 <SKIPCMD:LABEL=AB4,ON=32;
113 /
114 .M8 <STEP;
115 // *************************************
116 // * RECORDING DNB DATA (COPY) STARTED *
117 // *************************************
118 /
119 <TRANS FILE:VSNR=VSNNR2,FILE=KDEDATA.EWSD/IA.ICDNB,COPMOD=POST;
120 <SKIPCMD:LABEL=AB5,ON=32;
121 /
122 <REWIND MT:VSN=VSNNR2;
123 /
124 .M9 <STEP;
125 // ***********************************
126 // * RECORDING DNB DATA (COPY) ENDED *
127 // ***********************************
128 /
129 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
130 <DISP FILE:VSN=VSNNR2;
131 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
132 /
133 .MA <STEP;
134 // ************************************************
135 // * RELEASING RECORDED FILE AREA FOR OVERWRITING *
136 // ************************************************
137 /
138 <REL CYCFILE:FILE=IA.ICDNB;
139 /
140 .MB <STEP;
141 // ***********************************
142 // * DISPLAYING DNB DATA FILE STATUS *
143 // ***********************************
144 /
145 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
146 <DISP FILE:FILE=IA.ICDNB,ALL;
147 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
148 /
149 <SKIPCMD:LABEL=OUT;
150 / *******************************

A30808-X3080-C485-5-7620 MMN:SW-COFIP-229
MMN:SW Maintenance
Software

RCDNB

151 / * FAULT EXITS AND END MESSAGE *

152 / *******************************
153 /
154 .AB1 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
155 <DISP FILE:FILE=IA.ICDNB,ALL;
156 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
157 // ****************
158 // *** FAULT 01 ***
159 // ****************
160 // **********************************************
161 // *** DISK SAVING OF DNB DATA NOT EXECUTED. ***
162 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
163 // *** ***
164 // *** START COMMAND FILE CG.SA.RCDNB AGAIN. ***
165 // **********************************************
166 /
167 <SETCFOPT:OFF=1&&11,SCOPE=GLOBAL;
168 <SKIPCMD:LABEL=END;
169 /
170 .AB2 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
171 // ****************
172 // *** FAULT 02 ***
173 // ****************
174 // **********************************************
175 // *** LABELING OF DNB DATA RECORD TAPE ***
176 // *** (ORIGINAL) NOT EXECUTED. ***
177 // *** TAPE DEVICE OFFLINE OR DEFECTIVE OR ***
178 // *** TAPE DAMAGED: ***
179 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
180 // *** ***
181 // *** START COMMAND FILE CG.SA.RCDNB AGAIN. ***
182 // **********************************************
183 /
184 <SETCFOPT:OFF=1&3&&11,ON=2,SCOPE=GLOBAL;
185 <SKIPCMD:LABEL=END;
186 /
187 .AB3 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
188 // ****************
189 // *** FAULT 03 ***
190 // ****************
191 // **********************************************
192 // *** RECORDING OF DNB DATA (ORIGINAL) ***
193 // *** NOT EXECUTED. ***
194 // *** ***
195 // *** CASE 1: ***
196 // *** ======= ***
197 // *** TAPE DAMAGED OR FILE NOT AVAILABLE, ***
198 // *** CHECK PREREQUISITES, ELIMINATE FAULTS, ***
199 // *** ***
200 // *** START COMMAND FILE CG.SA.RCDNB AGAIN. ***

MMN:SW-COFIP-230 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

RCDNB

201 // *** ***

202 // *** CASE 2: ***
203 // *** ======= ***
204 // *** CORRESPONDING BACKGROUND MEMORY FILE ***
205 // *** IS EMPTY, ***
206 // *** CHECK PREREQUISITES: ***
207 // *** COMMAND TRANS FILE WAS NOT EXECUTED, ***
208 // *** ERROR: L FC 33. ***
209 // *** ***
210 // *** RECORDING OF DNB DATA IMPOSSIBLE. ***
211 // *** ***
212 // *** PROCEDURE IS FINISHED. ***
213 // **********************************************
214 /
215 <REWIND MT:VSN=VSNNR1;
216 /
217 <SETCFOPT:OFF=1&3&&11,ON=2,SCOPE=GLOBAL;
218 <SKIPCMD:LABEL=END;
219 /
220 .AB4 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
221 // ****************
222 // *** FAULT 04 ***
223 // ****************
224 // **********************************************
225 // *** LABELING OF DNB DATA RECORD TAPE ***
226 // *** (COPY) NOT EXECUTED. ***
227 // *** TAPE DEVICE OFFLINE OR DEFECTIVE OR ***
228 // *** TAPE DAMAGED: ***
229 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
230 // *** ***
231 // *** START COMMAND FILE CG.SA.RCDNB AGAIN. ***
232 // **********************************************
233 /
234 <SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL;
235 <SKIPCMD:LABEL=END;
236 /
237 .AB5 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
238 // ****************
239 // *** FAULT 05 ***
240 // ****************
241 // **********************************************
242 // *** RECORDING OF DNB DATA (COPY) ***
243 // *** NOT EXECUTED. ***
244 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
245 // *** ***
246 // *** START COMMAND FILE CG.SA.RCDNB AGAIN. ***
247 // **********************************************
248 /
249 <REWIND MT:VSN=VSNNR2;
250 /

A30808-X3080-C485-5-7620 MMN:SW-COFIP-231
MMN:SW Maintenance
Software

RCDNB

251 <SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL;
252 <SKIPCMD:LABEL=END;
253 /
254 .OUT <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
255 /
256 // *******************************
257 // *** FINISHED WITHOUT FAULTS ***
258 // *******************************
259 // *******************************************
260 // *** REMOVE DNB DATA RECORD TAPE (COPY). ***
261 // *** ***
262 // *** DNB DATA RECORDING IS FINISHED. ***
263 // *******************************************
264 /
265 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
266 <SKIPCMD:LABEL=END;
267 /
268 .END <SETCFOPT:ACKCFS=ERROR,DANCMD=NOEXEC,ACKREQ=NEG,SCOPE=GLOBAL;
269 <ENDFILE;

MMN:SW-COFIP-232 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

RCERS

1 <CMDFILE;
2 /
3 // 80-RCERS-01
4 /
5 /****V01***************************************************************
6 /* *
7 /* COMMAND FILE CG.SA.RCERS FOR RECORDING OF ERS DATA *
8 /* ================================================== *
9 /* *
10 /* TASK DESCRIPTION: *
11 /* ----------------- *
12 /* - RECORDING OF INDIVIDUAL CALL DATA *
13 /* *
14 /* HOLD TAPE READY/ LOADING MAGNETIC TAPE DEVICE: *
15 /* ---------------------------------------------- *
16 /* - TWO LARGE TAPES WITH WRITE RING ARE TO BE HELD READY *
17 /* - BEFORE STARTING THE COMMAND FILE THE MAGNETIC TAPE *
18 /* DEVICE IS TO BE LOADED AND SWITCHED TO ONLINE *
19 /* *
20 /* FAULT HANDLING: *
21 /* ----------------- *
22 /* - AFTER INTERRUPTION OF THE FILE PROCESSING VIA FAULT *
23 /* EXITS AND CORRESPONDING FAULT HANDLING THE FILE CAN *
24 /* BE STARTED AGAIN *
25 /* *
26 /* SWITCH PRESETTINGS FOR START POINTS AND ENTRY POINTS: *
27 /* ===================================================== *
28 /* START POINT SWITCH PRESETTINGS *
29 /* ----------- ------------------ *
30 /* RESETCFOPT; *
31 /* *
32 /* ENTRY POINT SWITCH PRESETTINGS *
33 /* ------------ ------------------ *
34 /* M1 SETCFOPT:OFF=1&&11,SCOPE=GLOBAL; *
35 /* M3 SETCFOPT:OFF=1&3&&11,ON=2,SCOPE=GLOBAL; *
36 /* M7 SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL; *
37 /* *
38 /* FAULT 01 SETCFOPT:OFF=1&&11,SCOPE=GLOBAL; *
39 /* FAULT 02,03 SETCFOPT:OFF=1&3&&11,ON=2,SCOPE=GLOBAL; *
40 /* FAULT 04,05 SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL; *
41 /* *
42 /**********************************************************************
43 /
44 <SETCFOPT:ACKCFS=ERROR,DANCMD=EXEC,ACKREQ=POS,SCOPE=GLOBAL;
45 /
46 <SKIPCMD:LABEL=END,ON=1;
47 <SKIPCMD:LABEL=M3,ON=2;
48 <SKIPCMD:LABEL=M7,ON=3;
49 /
50 .M1 <STEP;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-233
MMN:SW Maintenance
Software

RCERS

51 // ***************************
52 // * DISK SAVING OF ERS DATA *
53 // ***************************
54 /
55 <TRANS BUFFER:TYPE=ERS;
56 <SKIPCMD:LABEL=AB1,ON=32;
57 /
58 .M2 <STEP;
59 // ***********************************
60 // * DISPLAYING ERS DATA FILE STATUS *
61 // ***********************************
62 /
63 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
64 <DISP FILE:FILE=IA.ERST,ALL;
65 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
66 /
67 .M3 <STEP;
68 // ********************************************
69 // * LABELING ERS DATA RECORD TAPE (ORIGINAL) *
70 // ********************************************
71 /
72 <INIT MT:VSN=VSNNR1,MTD=00,CD=ISO,DENS=6250;
73 <SKIPCMD:LABEL=AB2,ON=32;
74 /
75 .M4 <STEP;
76 // *****************************************
77 // * RECORDING ERS DATA (ORIGINAL) STARTED *
78 // *****************************************
79 /
80 <TRANS FILE:VSNR=VSNNR1,FILE=KDEDATA.EWSD/IA.ERST,COPMOD=POST;
81 <SKIPCMD:LABEL=AB3,ON=32;
82 /
83 <REWIND MT:VSN=VSNNR1;
84 /
85 .M5 <STEP;
86 // ***************************************
87 // * RECORDING ERS DATA (ORIGINAL) ENDED *
88 // ***************************************
89 /
90 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
91 <DISP FILE:VSN=VSNNR1;
92 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
93 /
94 .M6 <STEP;
95 /
96 // *******************************************
97 // * REMOVE ERS DATA RECORD TAPE (ORIGINAL), *
98 // * MOUNT A LARGE TAPE WITH WRITE RING *
99 // * FOR RECORDING ERS DATA (COPY). *
100 // * *

MMN:SW-COFIP-234 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

RCERS

101 // * START COMMAND FILE CG.SA.RCERS AGAIN. *

102 // *******************************************
103 /
104 <SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL;
105 <SKIPCMD:LABEL=END;
106 /
107 .M7 <STEP;
108 // ****************************************
109 // * LABELING ERS DATA RECORD TAPE (COPY) *
110 // ****************************************
111 /
112 <INIT MT:VSN=VSNNR2,MTD=00,CD=ISO,DENS=6250;
113 <SKIPCMD:LABEL=AB4,ON=32;
114 /
115 .M8 <STEP;
116 // *************************************
117 // * RECORDING ERS DATA (COPY) STARTED *
118 // *************************************
119 /
120 <TRANS FILE:VSNR=VSNNR2,FILE=KDEDATA.EWSD/IA.ERST,COPMOD=POST;
121 <SKIPCMD:LABEL=AB5,ON=32;
122 /
123 <REWIND MT:VSN=VSNNR2;
124 /
125 .M9 <STEP;
126 // ***********************************
127 // * RECORDING ERS DATA (COPY) ENDED *
128 // ***********************************
129 /
130 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
131 <DISP FILE:VSN=VSNNR2;
132 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
133 /
134 .MA <STEP;
135 // ************************************************
136 // * RELEASING RECORDED FILE AREA FOR OVERWRITING *
137 // ************************************************
138 /
139 <REL CYCFILE:FILE=IA.ERST;
140 /
141 .MB <STEP;
142 // ***********************************
143 // * DISPLAYING ERS DATA FILE STATUS *
144 // ***********************************
145 /
146 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
147 <DISP FILE:FILE=IA.ERST,ALL;
148 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
149 /
150 <SKIPCMD:LABEL=OUT;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-235
MMN:SW Maintenance
Software

RCERS

151 / *******************************
152 / * FAULT EXITS AND END MESSAGE *
153 / *******************************
154 /
155 .AB1 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
156 <DISP FILE:FILE=IA.ERST,ALL;
157 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
158 // ****************
159 // *** FAULT 01 ***
160 // ****************
161 // **********************************************
162 // *** DISK SAVING OF ERS DATA NOT EXECUTED. ***
163 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
164 // *** ***
165 // *** START COMMAND FILE CG.SA.RCERS AGAIN. ***
166 // **********************************************
167 /
168 <SETCFOPT:OFF=1&&11,SCOPE=GLOBAL;
169 <SKIPCMD:LABEL=END;
170 /
171 .AB2 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
172 // ****************
173 // *** FAULT 02 ***
174 // ****************
175 // **********************************************
176 // *** LABELING OF ERS DATA RECORD TAPE ***
177 // *** (ORIGINAL) NOT EXECUTED. ***
178 // *** TAPE DEVICE OFFLINE OR DEFECTIVE OR ***
179 // *** TAPE DAMAGED: ***
180 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
181 // *** ***
182 // *** START COMMAND FILE CG.SA.RCERS AGAIN. ***
183 // **********************************************
184 /
185 <SETCFOPT:OFF=1&3&&11,ON=2,SCOPE=GLOBAL;
186 <SKIPCMD:LABEL=END;
187 /
188 .AB3 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
189 // ****************
190 // *** FAULT 03 ***
191 // ****************
192 // **********************************************
193 // *** RECORDING OF ERS DATA (ORIGINAL) ***
194 // *** NOT EXECUTED. ***
195 // *** ***
196 // *** CASE 1: ***
197 // *** ======= ***
198 // *** TAPE DAMAGED OR FILE NOT AVAILABLE, ***
199 // *** CHECK PREREQUISITES, ELIMINATE FAULTS, ***
200 // *** ***

MMN:SW-COFIP-236 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

RCERS

201 // *** START COMMAND FILE CG.SA.RCERS AGAIN. ***

202 // *** ***
203 // *** CASE 2: ***
204 // *** ======= ***
205 // *** CORRESPONDING BACKGROUND MEMORY FILE ***
206 // *** IS EMPTY, ***
207 // *** CHECK PREREQUISITES: ***
208 // *** COMMAND TRANS FILE WAS NOT EXECUTED, ***
209 // *** ERROR: L FC 33. ***
210 // *** ***
211 // *** RECORDING OF ERS DATA IMPOSSIBLE. ***
212 // *** ***
213 // *** PROCEDURE IS FINISHED. ***
214 // **********************************************
215 /
216 <REWIND MT:VSN=VSNNR1;
217 /
218 <SETCFOPT:OFF=1&3&&11,ON=2,SCOPE=GLOBAL;
219 <SKIPCMD:LABEL=END;
220 /
221 .AB4 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
222 // ****************
223 // *** FAULT 04 ***
224 // ****************
225 // **********************************************
226 // *** LABELING OF ERS DATA RECORD TAPE ***
227 // *** (COPY) NOT EXECUTED. ***
228 // *** TAPE DEVICE OFFLINE OR DEFECTIVE OR ***
229 // *** TAPE DAMAGED: ***
230 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
231 // *** ***
232 // *** START COMMAND FILE CG.SA.RCERS AGAIN. ***
233 // **********************************************
234 /
235 <SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL;
236 <SKIPCMD:LABEL=END;
237 /
238 .AB5 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
239 // ****************
240 // *** FAULT 05 ***
241 // ****************
242 // **********************************************
243 // *** RECORDING OF ERS DATA (COPY) ***
244 // *** NOT EXECUTED. ***
245 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
246 // *** ***
247 // *** START COMMAND FILE CG.SA.RCERS AGAIN. ***
248 // **********************************************
249 /
250 <REWIND MT:VSN=VSNNR2;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-237
MMN:SW Maintenance
Software

RCERS

251 /
252 <SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL;
253 <SKIPCMD:LABEL=END;
254 /
255 .OUT <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
256 /
257 // *******************************
258 // *** FINISHED WITHOUT FAULTS ***
259 // *******************************
260 // *******************************************
261 // *** REMOVE ERS DATA RECORD TAPE (COPY). ***
262 // *** ***
263 // *** ERS DATA RECORDING IS FINISHED. ***
264 // *******************************************
265 /
266 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
267 <SKIPCMD:LABEL=END;
268 /
269 .END <SETCFOPT:ACKCFS=ERROR,DANCMD=NOEXEC,ACKREQ=NEG,SCOPE=GLOBAL;
270 <ENDFILE;

MMN:SW-COFIP-238 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

RCFIR

1 <CMDFILE;
2 /
3 // 80-RCFIR-01
4 /
5 /****V01***************************************************************
6 /* *
7 /* COMMAND FILE CG.SA.RCFIR FOR RECORDING OF FIR DATA *
8 /* ================================================== *
9 /* *
10 /* TASK DESCRIPTION: *
11 /* ----------------- *
12 /* - RECORDING OF INDIVIDUAL CALL DATA *
13 /* *
14 /* HOLD TAPE READY/ LOADING MAGNETIC TAPE DEVICE: *
15 /* ---------------------------------------------- *
16 /* - TWO LARGE TAPES WITH WRITE RING ARE TO BE HELD READY *
17 /* - BEFORE STARTING THE COMMAND FILE THE MAGNETIC TAPE *
18 /* DEVICE IS TO BE LOADED AND SWITCHED TO ONLINE *
19 /* *
20 /* FAULT HANDLING: *
21 /* ----------------- *
22 /* - AFTER INTERRUPTION OF THE FILE PROCESSING VIA FAULT *
23 /* EXITS AND CORRESPONDING FAULT HANDLING THE FILE CAN *
24 /* BE STARTED AGAIN *
25 /* *
26 /* SWITCH PRESETTINGS FOR START POINTS AND ENTRY POINTS: *
27 /* ===================================================== *
28 /* START POINT SWITCH PRESETTINGS *
29 /* ----------- ------------------ *
30 /* RESETCFOPT; *
31 /* *
32 /* ENTRY POINT SWITCH PRESETTINGS *
33 /* ------------ ------------------ *
34 /* M1 SETCFOPT:OFF=1&&11,SCOPE=GLOBAL; *
35 /* M3 SETCFOPT:OFF=1&3&&11,ON=2,SCOPE=GLOBAL; *
36 /* M7 SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL; *
37 /* *
38 /* FAULT 01 SETCFOPT:OFF=1&&11,SCOPE=GLOBAL; *
39 /* FAULT 02,03 SETCFOPT:OFF=1&3&&11,ON=2,SCOPE=GLOBAL; *
40 /* FAULT 04,05 SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL; *
41 /* *
42 /**********************************************************************
43 /
44 <SETCFOPT:ACKCFS=ERROR,DANCMD=EXEC,ACKREQ=POS,SCOPE=GLOBAL;
45 /
46 <SKIPCMD:LABEL=END,ON=1;
47 <SKIPCMD:LABEL=M3,ON=2;
48 <SKIPCMD:LABEL=M7,ON=3;
49 /
50 .M1 <STEP;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-239
MMN:SW Maintenance
Software

RCFIR

51 // ***************************
52 // * DISK SAVING OF FIR DATA *
53 // ***************************
54 /
55 <TRANS BUFFER:TYPE=FIR;
56 <SKIPCMD:LABEL=AB1,ON=32;
57 /
58 .M2 <STEP;
59 // ***********************************
60 // * DISPLAYING FIR DATA FILE STATUS *
61 // ***********************************
62 /
63 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
64 <DISP FILE:FILE=IA.ICFIR,ALL;
65 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
66 /
67 .M3 <STEP;
68 // ********************************************
69 // * LABELING FIR DATA RECORD TAPE (ORIGINAL) *
70 // ********************************************
71 /
72 <INIT MT:VSN=VSNNR1,MTD=00,CD=ISO,DENS=6250;
73 <SKIPCMD:LABEL=AB2,ON=32;
74 /
75 .M4 <STEP;
76 // *****************************************
77 // * RECORDING FIR DATA (ORIGINAL) STARTED *
78 // *****************************************
79 /
80 <TRANS FILE:VSNR=VSNNR1,FILE=KDEDATA.EWSD/IA.ICFIR,COPMOD=POST;
81 <SKIPCMD:LABEL=AB3,ON=32;
82 /
83 <REWIND MT:VSN=VSNNR1;
84 /
85 .M5 <STEP;
86 // ***************************************
87 // * RECORDING FIR DATA (ORIGINAL) ENDED *
88 // ***************************************
89 /
90 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
91 <DISP FILE:VSN=VSNNR1;
92 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
93 /
94 .M6 <STEP;
95 // *******************************************
96 // * REMOVE FIR DATA RECORD TAPE (ORIGINAL), *
97 // * MOUNT A LARGE TAPE WITH WRITE RING *
98 // * FOR RECORDING FIR DATA (COPY). *
99 // * *
100 // * START COMMAND FILE CG.SA.RCFIR AGAIN. *

MMN:SW-COFIP-240 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

RCFIR

101 // *******************************************
102 /
103 <SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL;
104 <SKIPCMD:LABEL=END;
105 /
106 .M7 <STEP;
107 // ****************************************
108 // * LABELING FIR DATA RECORD TAPE (COPY) *
109 // ****************************************
110 /
111 <INIT MT:VSN=VSNNR2,MTD=00,CD=ISO,DENS=6250;
112 <SKIPCMD:LABEL=AB4,ON=32;
113 /
114 .M8 <STEP;
115 // *************************************
116 // * RECORDING FIR DATA (COPY) STARTED *
117 // *************************************
118 /
119 <TRANS FILE:VSNR=VSNNR2,FILE=KDEDATA.EWSD/IA.ICFIR,COPMOD=POST;
120 <SKIPCMD:LABEL=AB5,ON=32;
121 /
122 <REWIND MT:VSN=VSNNR2;
123 /
124 .M9 <STEP;
125 // ***********************************
126 // * RECORDING FIR DATA (COPY) ENDED *
127 // ***********************************
128 /
129 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
130 <DISP FILE:VSN=VSNNR2;
131 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
132 /
133 .MA <STEP;
134 // ************************************************
135 // * RELEASING RECORDED FILE AREA FOR OVERWRITING *
136 // ************************************************
137 /
138 <REL CYCFILE:FILE=IA.ICFIR;
139 /
140 .MB <STEP;
141 // ***********************************
142 // * DISPLAYING FIR DATA FILE STATUS *
143 // ***********************************
144 /
145 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
146 <DISP FILE:FILE=IA.ICFIR,ALL;
147 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
148 /
149 <SKIPCMD:LABEL=OUT;
150 / *******************************

A30808-X3080-C485-5-7620 MMN:SW-COFIP-241
MMN:SW Maintenance
Software

RCFIR

151 / * FAULT EXITS AND END MESSAGE *

152 / *******************************
153 /
154 .AB1 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
155 <DISP FILE:FILE=IA.ICFIR,ALL;
156 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
157 // ****************
158 // *** FAULT 01 ***
159 // ****************
160 // **********************************************
161 // *** DISK SAVING OF FIR DATA NOT EXECUTED. ***
162 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
163 // *** ***
164 // *** START COMMAND FILE CG.SA.RCFIR AGAIN. ***
165 // **********************************************
166 /
167 <SETCFOPT:OFF=1&&11,SCOPE=GLOBAL;
168 <SKIPCMD:LABEL=END;
169 /
170 .AB2 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
171 // ****************
172 // *** FAULT 02 ***
173 // ****************
174 // **********************************************
175 // *** LABELING OF FIR DATA RECORD TAPE ***
176 // *** (ORIGINAL) NOT EXECUTED. ***
177 // *** TAPE DEVICE OFFLINE OR DEFECTIVE OR ***
178 // *** TAPE DFIRGED: ***
179 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
180 // *** ***
181 // *** START COMMAND FILE CG.SA.RCFIR AGAIN. ***
182 // **********************************************
183 /
184 <SETCFOPT:OFF=1&3&&11,ON=2,SCOPE=GLOBAL;
185 <SKIPCMD:LABEL=END;
186 /
187 .AB3 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
188 // ****************
189 // *** FAULT 03 ***
190 // ****************
191 // **********************************************
192 // *** RECORDING OF FIR DATA (ORIGINAL) ***
193 // *** NOT EXECUTED. ***
194 // *** ***
195 // *** CASE 1: ***
196 // *** ======= ***
197 // *** TAPE DFIRGED OR FILE NOT AVAILABLE, ***
198 // *** CHECK PREREQUISITES, ELIMINATE FAULTS, ***
199 // *** ***
200 // *** START COMMAND FILE CG.SA.RCFIR AGAIN. ***

MMN:SW-COFIP-242 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

RCFIR

201 // *** ***

202 // *** CASE 2: ***
203 // *** ======= ***
204 // *** CORRESPONDING BACKGROUND MEMORY FILE ***
205 // *** IS EMPTY, ***
206 // *** CHECK PREREQUISITES: ***
207 // *** COMMAND TRANS FILE WAS NOT EXECUTED, ***
208 // *** ERROR: L FC 33. ***
209 // *** ***
210 // *** RECORDING OF FIR DATA IMPOSSIBLE. ***
211 // *** ***
212 // *** PROCEDURE IS FINISHED. ***
213 // **********************************************
214 /
215 <REWIND MT:VSN=VSNNR1;
216 /
217 <SETCFOPT:OFF=1&3&&11,ON=2,SCOPE=GLOBAL;
218 <SKIPCMD:LABEL=END;
219 /
220 .AB4 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
221 // ****************
222 // *** FAULT 04 ***
223 // ****************
224 // **********************************************
225 // *** LABELING OF FIR DATA RECORD TAPE ***
226 // *** (COPY) NOT EXECUTED. ***
227 // *** TAPE DEVICE OFFLINE OR DEFECTIVE OR ***
228 // *** TAPE DFIRGED: ***
229 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
230 // *** ***
231 // *** START COMMAND FILE CG.SA.RCFIR AGAIN. ***
232 // **********************************************
233 /
234 <SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL;
235 <SKIPCMD:LABEL=END;
236 /
237 .AB5 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
238 // ****************
239 // *** FAULT 05 ***
240 // ****************
241 // **********************************************
242 // *** RECORDING OF FIR DATA (COPY) ***
243 // *** NOT EXECUTED. ***
244 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
245 // *** ***
246 // *** START COMMAND FILE CG.SA.RCFIR AGAIN. ***
247 // **********************************************
248 /
249 <REWIND MT:VSN=VSNNR2;
250 /

A30808-X3080-C485-5-7620 MMN:SW-COFIP-243
MMN:SW Maintenance
Software

RCFIR

251 <SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL;
252 <SKIPCMD:LABEL=END;
253 /
254 .OUT <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
255 /
256 // *******************************
257 // *** FINISHED WITHOUT FAULTS ***
258 // *******************************
259 // *******************************************
260 // *** REMOVE FIR DATA RECORD TAPE (COPY). ***
261 // *** ***
262 // *** FIR DATA RECORDING IS FINISHED. ***
263 // *******************************************
264 /
265 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
266 <SKIPCMD:LABEL=END;
267 /
268 .END <SETCFOPT:ACKCFS=ERROR,DANCMD=NOEXEC,ACKREQ=NEG,SCOPE=GLOBAL;
269 <ENDFILE;

MMN:SW-COFIP-244 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

RCIAR

1 <CMDFILE;
2 /
3 // 80-RCIAR-01
4 /
5 /****V01***************************************************************
6 /* *
7 /* COMMAND FILE CG.SA.RCIAR FOR RECORDING OF IAR DATA *
8 /* ================================================== *
9 /* *
10 /* TASK DESCRIPTION: *
11 /* ----------------- *
12 /* - RECORDING OF INDIVIDUAL CALL DATA *
13 /* *
14 /* HOLD TAPE READY/ LOADING MAGNETIC TAPE DEVICE: *
15 /* ---------------------------------------------- *
16 /* - TWO LARGE TAPES WITH WRITE RING ARE TO BE HELD READY *
17 /* - BEFORE STARTING THE COMMAND FILE THE MAGNETIC TAPE *
18 /* DEVICE IS TO BE LOADED AND SWITCHED TO ONLINE *
19 /* *
20 /* FAULT HANDLING: *
21 /* ----------------- *
22 /* - AFTER INTERRUPTION OF THE FILE PROCESSING VIA FAULT *
23 /* EXITS AND CORRESPONDING FAULT HANDLING THE FILE CAN *
24 /* BE STARTED AGAIN *
25 /* *
26 /* SWITCH PRESETTINGS FOR START POINTS AND ENTRY POINTS: *
27 /* ===================================================== *
28 /* START POINT SWITCH PRESETTINGS *
29 /* ----------- ------------------ *
30 /* RESETCFOPT; *
31 /* *
32 /* ENTRY POINT SWITCH PRESETTINGS *
33 /* ------------ ------------------ *
34 /* M1 SETCFOPT:OFF=1&&11,SCOPE=GLOBAL; *
35 /* M3 SETCFOPT:OFF=1&3&&11,ON=2,SCOPE=GLOBAL; *
36 /* M7 SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL; *
37 /* *
38 /* FAULT 01 SETCFOPT:OFF=1&&11,SCOPE=GLOBAL; *
39 /* FAULT 02,03 SETCFOPT:OFF=1&3&&11,ON=2,SCOPE=GLOBAL; *
40 /* FAULT 04,05 SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL; *
41 /* *
42 /**********************************************************************
43 /
44 <SETCFOPT:ACKCFS=ERROR,DANCMD=EXEC,ACKREQ=POS,SCOPE=GLOBAL;
45 /
46 <SKIPCMD:LABEL=END,ON=1;
47 <SKIPCMD:LABEL=M3,ON=2;
48 <SKIPCMD:LABEL=M7,ON=3;
49 /
50 .M1 <STEP;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-245
MMN:SW Maintenance
Software

RCIAR

51 // ***************************
52 // * DISK SAVING OF IAR DATA *
53 // ***************************
54 /
55 <TRANS BUFFER:TYPE=IARA;
56 <SKIPCMD:LABEL=AB1,ON=32;
57 /
58 .M2 <STEP;
59 // ***********************************
60 // * DISPLAYING IAR DATA FILE STATUS *
61 // ***********************************
62 /
63 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
64 <DISP FILE:FILE=IA.ICIAR,ALL;
65 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
66 /
67 .M3 <STEP;
68 // ********************************************
69 // * LABELING IAR DATA RECORD TAPE (ORIGINAL) *
70 // ********************************************
71 /
72 <INIT MT:VSN=VSNNR1,MTD=00,CD=EBC,DENS=6250;
73 <SKIPCMD:LABEL=AB2,ON=32;
74 /
75 .M4 <STEP;
76 // *****************************************
77 // * RECORDING IAR DATA (ORIGINAL) STARTED *
78 // *****************************************
79 //
80 // ******************************************************************
81 // * *
82 // * *
83 // * ATTENTION *
84 // * ========= *
85 // * *
86 // * IF THE TAPE IS FILLED UP BEFORE THE FILE TRANSFER *
87 // * IS COMPLETED *
88 // * THE FOLLOWING MESSAGES WILL BE DISPLAYED: *
89 // * *
90 // * *
91 // * TRANSFILE:FILE=REGDATA.EWSD,VSNR=vsnnr1,COPMOD=POST; *
92 // * *
93 // * PLEASE MOUNT CONTINUATION TAPE TO VSN = vsnnr1 *
94 // * *
95 // * THEN REMOVE THE TAPE FROM MAGNETIC TAPE DEVICE AND *
96 // * LOAD THE MAGNETIC TAPE DEVICE WITH THE CONTINUATION TAPE. *
97 // * *
98 // ******************************************************************
99 /
100 //

MMN:SW-COFIP-246 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

RCIAR

101 // ******************************************************************
102 // * *
103 // * AFTER THAT TYPE IN MANUALLY: *
104 // * ============================ *
105 // * *
106 // * INIT MT:VSN=vsnnr1+1,MTD=0,CD=EBC,DENS=6250; *
107 // * *
108 // * MOUNT TAPE:DEV=MTD-00; *
109 // * *
110 // ******************************************************************
111 /
112 <TRANS FILE:VSNR=VSNNR1,FILE=REGDATA.EWSD/IA.ICIAR,COPMOD=POST;
113 <SKIPCMD:LABEL=AB3,ON=32;
114 /
115 <REWIND MT:MTD=00;
116 /
117 .M5 <STEP;
118 // ***************************************
119 // * RECORDING IAR DATA (ORIGINAL) ENDED *
120 // ***************************************
121 /
122 .M6 <STEP;
123 // **********************************************
124 // * REMOVE IAR DATA RECORD TAPE (ORIGINAL) *
125 // * OR IAR DATA RECORD TAPE (ORIGINAL) PART 2, *
126 // * MOUNT A LARGE TAPE WITH WRITE RING *
127 // * FOR RECORDING IAR DATA (COPY). *
128 // * *
129 // * START COMMAND FILE CG.SA.RCIAR AGAIN. *
130 // **********************************************
131 /
132 <SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL;
133 <SKIPCMD:LABEL=END;
134 /
135 .M7 <STEP;
136 // ****************************************
137 // * LABELING IAR DATA RECORD TAPE (COPY) *
138 // ****************************************
139 /
140 <INIT MT:VSN=VSNNR2,MTD=00,CD=EBC,DENS=6250;
141 <SKIPCMD:LABEL=AB4,ON=32;
142 /
143 .M8 <STEP;
144 // *************************************
145 // * RECORDING IAR DATA (COPY) STARTED *
146 // *************************************
147 /
148 //
149 // ******************************************************************
150 // * *

A30808-X3080-C485-5-7620 MMN:SW-COFIP-247
MMN:SW Maintenance
Software

RCIAR

151 // * *
152 // * ATTENTION *
153 // * ========= *
154 // * *
155 // * IF THE TAPE IS FILLED UP BEFORE THE FILE TRANSFER *
156 // * IS COMPLETED *
157 // * THE FOLLOWING MESSAGES WILL BE DISPLAYED: *
158 // * *
159 // * *
160 // * TRANSFILE:FILE=REGDATA.EWSD,VSNR=vsnnr2,COPMOD=POST; *
161 // * *
162 // * PLEASE MOUNT CONTINUATION TAPE TO VSN = vsnnr2 *
163 // * *
164 // * THEN REMOVE THE TAPE FROM MAGNETIC TAPE DEVICE AND *
165 // * LOAD THE MAGNETIC TAPE DEVICE WITH THE CONTINUATION TAPE. *
166 // * *
167 // ******************************************************************
168 /
169 //
170 // ******************************************************************
171 // * *
172 // * AFTER THAT TYPE IN MANUALLY: *
173 // * ============================ *
174 // * *
175 // * INIT MT:VSN=vsnnr2+1,MTD=0,CD=EBC,DENS=6250; *
176 // * *
177 // * MOUNT TAPE:DEV=MTD-00; *
178 // * *
179 // ******************************************************************
180 /
181 <TRANS FILE:VSNR=VSNNR2,FILE=REGDATA.EWSD/IA.ICIAR,COPMOD=POST;
182 <SKIPCMD:LABEL=AB5,ON=32;
183 /
184 <REWIND MT:MTD=00;
185 /
186 .M9 <STEP;
187 // ***********************************
188 // * RECORDING IAR DATA (COPY) ENDED *
189 // ***********************************
190 /
191 .MA <STEP;
192 // ************************************************
193 // * RELEASING RECORDED FILE AREA FOR OVERWRITING *
194 // ************************************************
195 /
196 <REL CYCFILE:FILE=IA.ICIAR;
197 /
198 .MB <STEP;
199 // ***********************************
200 // * DISPLAYING IAR DATA FILE STATUS *

MMN:SW-COFIP-248 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

RCIAR

201 // ***********************************
202 /
203 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
204 <DISP FILE:FILE=IA.ICIAR,ALL;
205 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
206 /
207 <SKIPCMD:LABEL=OUT;
208 / *******************************
209 / * FAULT EXITS AND END MESSAGE *
210 / *******************************
211 /
212 .AB1 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
213 <DISP FILE:FILE=IA.ICIAR,ALL;
214 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
215 // ****************
216 // *** FAULT 01 ***
217 // ****************
218 // **********************************************
219 // *** DISK SAVING OF IAR DATA NOT EXECUTED. ***
220 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
221 // *** ***
222 // *** START COMMAND FILE CG.SA.RCIAR AGAIN. ***
223 // **********************************************
224 /
225 <SETCFOPT:OFF=1&&11,SCOPE=GLOBAL;
226 <SKIPCMD:LABEL=END;
227 /
228 .AB2 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
229 // ****************
230 // *** FAULT 02 ***
231 // ****************
232 // **********************************************
233 // *** LABELING OF IAR DATA RECORD TAPE ***
234 // *** (ORIGINAL) NOT EXECUTED. ***
235 // *** TAPE DEVICE OFFLINE OR DEFECTIVE OR ***
236 // *** TAPE DIARGED: ***
237 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
238 // *** ***
239 // *** START COMMAND FILE CG.SA.RCIAR AGAIN. ***
240 // **********************************************
241 /
242 <SETCFOPT:OFF=1&3&&11,ON=2,SCOPE=GLOBAL;
243 <SKIPCMD:LABEL=END;
244 /
245 .AB3 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
246 // ****************
247 // *** FAULT 03 ***
248 // ****************
249 // **********************************************
250 // *** RECORDING OF IAR DATA (ORIGINAL) ***

A30808-X3080-C485-5-7620 MMN:SW-COFIP-249
MMN:SW Maintenance
Software

RCIAR

251 // *** NOT EXECUTED. ***

252 // *** ***
253 // *** CASE 1: ***
254 // *** ======= ***
255 // *** TAPE DIARGED OR FILE NOT AVAILABLE, ***
256 // *** CHECK PREREQUISITES, ELIMINATE FAULTS, ***
257 // *** ***
258 // *** START COMMAND FILE CG.SA.RCIAR AGAIN. ***
259 // *** ***
260 // *** CASE 2: ***
261 // *** ======= ***
262 // *** CORRESPONDING BACKGROUND MEMORY FILE ***
263 // *** IS EMPTY, ***
264 // *** CHECK PREREQUISITES: ***
265 // *** COMMAND TRANS FILE WAS NOT EXECUTED, ***
266 // *** ERROR: L FC 33. ***
267 // *** ***
268 // *** RECORDING OF IAR DATA IMPOSSIBLE. ***
269 // *** ***
270 // *** PROCEDURE IS FINISHED. ***
271 // **********************************************
272 /
273 <REWIND MT:VSN=VSNNR1;
274 /
275 <SETCFOPT:OFF=1&3&&11,ON=2,SCOPE=GLOBAL;
276 <SKIPCMD:LABEL=END;
277 /
278 .AB4 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
279 // ****************
280 // *** FAULT 04 ***
281 // ****************
282 // **********************************************
283 // *** LABELING OF IAR DATA RECORD TAPE ***
284 // *** (COPY) NOT EXECUTED. ***
285 // *** TAPE DEVICE OFFLINE OR DEFECTIVE OR ***
286 // *** TAPE DIARGED: ***
287 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
288 // *** ***
289 // *** START COMMAND FILE CG.SA.RCIAR AGAIN. ***
290 // **********************************************
291 /
292 <SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL;
293 <SKIPCMD:LABEL=END;
294 /
295 .AB5 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
296 // ****************
297 // *** FAULT 05 ***
298 // ****************
299 // **********************************************
300 // *** RECORDING OF IAR DATA (COPY) ***

MMN:SW-COFIP-250 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

RCIAR

301 // *** NOT EXECUTED. ***

302 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
303 // *** ***
304 // *** START COMMAND FILE CG.SA.RCIAR AGAIN. ***
305 // **********************************************
306 /
307 <REWIND MT:VSN=VSNNR2;
308 /
309 <SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL;
310 <SKIPCMD:LABEL=END;
311 /
312 .OUT <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
313 /
314 // *******************************
315 // *** FINISHED WITHOUT FAULTS ***
316 // *******************************
317 // *******************************************
318 // *** REMOVE IAR DATA RECORD TAPE (COPY). ***
319 // *** ***
320 // *** IAR DATA RECORDING IS FINISHED. ***
321 // *******************************************
322 /
323 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
324 <SKIPCMD:LABEL=END;
325 /
326 .END <SETCFOPT:ACKCFS=ERROR,DANCMD=NOEXEC,ACKREQ=NEG,SCOPE=GLOBAL;
327 <ENDFILE;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-251
MMN:SW Maintenance
Software

RCINA

1 <CMDFILE;
2 /
3 // 80-RCINA-01
4 /
5 /****V01***************************************************************
6 /* *
7 /* COMMAND FILE CG.SA.RCINA FOR RECORDING OF INA DATA *
8 /* ================================================== *
9 /* *
10 /* TASK DESCRIPTION: *
11 /* ----------------- *
12 /* - RECORDING OF INDIVIDUAL CALL DATA *
13 /* *
14 /* HOLD TAPE READY/ LOADING MAGNETIC TAPE DEVICE: *
15 /* ---------------------------------------------- *
16 /* - TWO LARGE TAPES WITH WRITE RING ARE TO BE HELD READY *
17 /* - BEFORE STARTING THE COMMAND FILE THE MAGNETIC TAPE *
18 /* DEVICE IS TO BE LOADED AND SWITCHED TO ONLINE *
19 /* *
20 /* FAULT HANDLING: *
21 /* ----------------- *
22 /* - AFTER INTERRUPTION OF THE FILE PROCESSING VIA FAULT *
23 /* EXITS AND CORRESPONDING FAULT HANDLING THE FILE CAN *
24 /* BE STARTED AGAIN *
25 /* *
26 /* SWITCH PRESETTINGS FOR START POINTS AND ENTRY POINTS: *
27 /* ===================================================== *
28 /* START POINT SWITCH PRESETTINGS *
29 /* ----------- ------------------ *
30 /* RESETCFOPT; *
31 /* *
32 /* ENTRY POINT SWITCH PRESETTINGS *
33 /* ------------ ------------------ *
34 /* M1 SETCFOPT:OFF=1&&11,SCOPE=GLOBAL; *
35 /* M3 SETCFOPT:OFF=1&3&&11,ON=2,SCOPE=GLOBAL; *
36 /* M7 SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL; *
37 /* *
38 /* FAULT 01 SETCFOPT:OFF=1&&11,SCOPE=GLOBAL; *
39 /* FAULT 02,03 SETCFOPT:OFF=1&3&&11,ON=2,SCOPE=GLOBAL; *
40 /* FAULT 04,05 SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL; *
41 /* *
42 /**********************************************************************
43 /
44 <SETCFOPT:ACKCFS=ERROR,DANCMD=EXEC,ACKREQ=POS,SCOPE=GLOBAL;
45 /
46 <SKIPCMD:LABEL=END,ON=1;
47 <SKIPCMD:LABEL=M3,ON=2;
48 <SKIPCMD:LABEL=M7,ON=3;
49 /
50 .M1 <STEP;

MMN:SW-COFIP-252 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

RCINA

51 // ***************************
52 // * DISK SAVING OF INA DATA *
53 // ***************************
54 /
55 <TRANS BUFFER:TYPE=INA;
56 <SKIPCMD:LABEL=AB1,ON=32;
57 /
58 .M2 <STEP;
59 // ***********************************
60 // * DISPLAYING INA DATA FILE STATUS *
61 // ***********************************
62 /
63 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
64 <DISP FILE:FILE=IA.ICINA,ALL;
65 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
66 /
67 .M3 <STEP;
68 // ********************************************
69 // * LABELING INA DATA RECORD TAPE (ORIGINAL) *
70 // ********************************************
71 /
72 <INIT MT:VSN=VSNNR1,MTD=00,CD=ISO,DENS=6250;
73 <SKIPCMD:LABEL=AB2,ON=32;
74 /
75 .M4 <STEP;
76 // *****************************************
77 // * RECORDING INA DATA (ORIGINAL) STARTED *
78 // *****************************************
79 /
80 <TRANS FILE:VSNR=VSNNR1,FILE=KDEDATA.EWSD/IA.ICINA,COPMOD=POST;
81 <SKIPCMD:LABEL=AB3,ON=32;
82 /
83 <REWIND MT:VSN=VSNNR1;
84 /
85 .M5 <STEP;
86 // ***************************************
87 // * RECORDING INA DATA (ORIGINAL) ENDED *
88 // ***************************************
89 /
90 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
91 <DISP FILE:VSN=VSNNR1;
92 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
93 /
94 .M6 <STEP;
95 /
96 // *******************************************
97 // * REMOVE INA DATA RECORD TAPE (ORIGINAL), *
98 // * MOUNT A LARGE TAPE WITH WRITE RING *
99 // * FOR RECORDING INA DATA (COPY). *
100 // * *

A30808-X3080-C485-5-7620 MMN:SW-COFIP-253
MMN:SW Maintenance
Software

RCINA

101 // * START COMMAND FILE CG.SA.RCINA AGAIN. *

102 // *******************************************
103 /
104 <SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL;
105 <SKIPCMD:LABEL=END;
106 /
107 .M7 <STEP;
108 // ****************************************
109 // * LABELING INA DATA RECORD TAPE (COPY) *
110 // ****************************************
111 /
112 <INIT MT:VSN=VSNNR2,MTD=00,CD=ISO,DENS=6250;
113 <SKIPCMD:LABEL=AB4,ON=32;
114 /
115 .M8 <STEP;
116 // *************************************
117 // * RECORDING INA DATA (COPY) STARTED *
118 // *************************************
119 /
120 <TRANS FILE:VSNR=VSNNR2,FILE=KDEDATA.EWSD/IA.ICINA,COPMOD=POST;
121 <SKIPCMD:LABEL=AB5,ON=32;
122 /
123 <REWIND MT:VSN=VSNNR2;
124 /
125 .M9 <STEP;
126 // ***********************************
127 // * RECORDING INA DATA (COPY) ENDED *
128 // ***********************************
129 /
130 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
131 <DISP FILE:VSN=VSNNR2;
132 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
133 /
134 .MA <STEP;
135 // ************************************************
136 // * RELEASING RECORDED FILE AREA FOR OVERWRITING *
137 // ************************************************
138 /
139 <REL CYCFILE:FILE=IA.ICINA;
140 /
141 .MB <STEP;
142 // ***********************************
143 // * DISPLAYING INA DATA FILE STATUS *
144 // ***********************************
145 /
146 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
147 <DISP FILE:FILE=IA.ICINA,ALL;
148 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
149 /
150 <SKIPCMD:LABEL=OUT;

MMN:SW-COFIP-254 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

RCINA

151 / *******************************
152 / * FAULT EXITS AND END MESSAGE *
153 / *******************************
154 /
155 .AB1 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
156 <DISP FILE:FILE=IA.ICINA,ALL;
157 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
158 // ****************
159 // *** FAULT 01 ***
160 // ****************
161 // **********************************************
162 // *** DISK SAVING OF INA DATA NOT EXECUTED. ***
163 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
164 // *** ***
165 // *** START COMMAND FILE CG.SA.RCINA AGAIN. ***
166 // **********************************************
167 /
168 <SETCFOPT:OFF=1&&11,SCOPE=GLOBAL;
169 <SKIPCMD:LABEL=END;
170 /
171 .AB2 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
172 // ****************
173 // *** FAULT 02 ***
174 // ****************
175 // **********************************************
176 // *** LABELING OF INA DATA RECORD TAPE ***
177 // *** (ORIGINAL) NOT EXECUTED. ***
178 // *** TAPE DEVICE OFFLINE OR DEFECTIVE OR ***
179 // *** TAPE DAMAGED: ***
180 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
181 // *** ***
182 // *** START COMMAND FILE CG.SA.RCINA AGAIN. ***
183 // **********************************************
184 /
185 <SETCFOPT:OFF=1&3&&11,ON=2,SCOPE=GLOBAL;
186 <SKIPCMD:LABEL=END;
187 /
188 .AB3 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
189 // ****************
190 // *** FAULT 03 ***
191 // ****************
192 // **********************************************
193 // *** RECORDING OF INA DATA (ORIGINAL) ***
194 // *** NOT EXECUTED. ***
195 // *** ***
196 // *** CASE 1: ***
197 // *** ======= ***
198 // *** TAPE DAMAGED OR FILE NOT AVAILABLE, ***
199 // *** CHECK PREREQUISITES, ELIMINATE FAULTS, ***
200 // *** ***

A30808-X3080-C485-5-7620 MMN:SW-COFIP-255
MMN:SW Maintenance
Software

RCINA

201 // *** START COMMAND FILE CG.SA.RCINA AGAIN. ***

202 // *** ***
203 // *** CASE 2: ***
204 // *** ======= ***
205 // *** CORRESPONDING BACKGROUND MEMORY FILE ***
206 // *** IS EMPTY, ***
207 // *** CHECK PREREQUISITES: ***
208 // *** COMMAND TRANS FILE WAS NOT EXECUTED, ***
209 // *** ERROR: L FC 33. ***
210 // *** ***
211 // *** RECORDING OF INA DATA IMPOSSIBLE. ***
212 // *** ***
213 // *** PROCEDURE IS FINISHED. ***
214 // **********************************************
215 /
216 <REWIND MT:VSN=VSNNR1;
217 /
218 <SETCFOPT:OFF=1&3&&11,ON=2,SCOPE=GLOBAL;
219 <SKIPCMD:LABEL=END;
220 /
221 .AB4 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
222 // ****************
223 // *** FAULT 04 ***
224 // ****************
225 // **********************************************
226 // *** LABELING OF INA DATA RECORD TAPE ***
227 // *** (COPY) NOT EXECUTED. ***
228 // *** TAPE DEVICE OFFLINE OR DEFECTIVE OR ***
229 // *** TAPE DAMAGED: ***
230 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
231 // *** ***
232 // *** START COMMAND FILE CG.SA.RCINA AGAIN. ***
233 // **********************************************
234 /
235 <SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL;
236 <SKIPCMD:LABEL=END;
237 /
238 .AB5 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
239 // ****************
240 // *** FAULT 05 ***
241 // ****************
242 // **********************************************
243 // *** RECORDING OF INA DATA (COPY) ***
244 // *** NOT EXECUTED. ***
245 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
246 // *** ***
247 // *** START COMMAND FILE CG.SA.RCINA AGAIN. ***
248 // **********************************************
249 /
250 <REWIND MT:VSN=VSNNR2;

MMN:SW-COFIP-256 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

RCINA

251 /
252 <SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL;
253 <SKIPCMD:LABEL=END;
254 /
255 .OUT <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
256 /
257 // *******************************
258 // *** FINISHED WITHOUT FAULTS ***
259 // *******************************
260 // *******************************************
261 // *** REMOVE INA DATA RECORD TAPE (COPY). ***
262 // *** ***
263 // *** INA DATA RECORDING IS FINISHED. ***
264 // *******************************************
265 /
266 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
267 <SKIPCMD:LABEL=END;
268 /
269 .END <SETCFOPT:ACKCFS=ERROR,DANCMD=NOEXEC,ACKREQ=NEG,SCOPE=GLOBAL;
270 <ENDFILE;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-257
MMN:SW Maintenance
Software

RCMAL

1 <CMDFILE;
2 /
3 // 80-RCMAL-01
4 /
5 /****V01***************************************************************
6 /* *
7 /* COMMAND FILE CG.SA.RCMAL FOR RECORDING OF MAL DATA *
8 /* ================================================== *
9 /* *
10 /* TASK DESCRIPTION: *
11 /* ----------------- *
12 /* - RECORDING OF INDIVIDUAL CALL DATA *
13 /* *
14 /* HOLD TAPE READY/ LOADING MAGNETIC TAPE DEVICE: *
15 /* ---------------------------------------------- *
16 /* - TWO LARGE TAPES WITH WRITE RING ARE TO BE HELD READY *
17 /* - BEFORE STARTING THE COMMAND FILE THE MAGNETIC TAPE *
18 /* DEVICE IS TO BE LOADED AND SWITCHED TO ONLINE *
19 /* *
20 /* FAULT HANDLING: *
21 /* ----------------- *
22 /* - AFTER INTERRUPTION OF THE FILE PROCESSING VIA FAULT *
23 /* EXITS AND CORRESPONDING FAULT HANDLING THE FILE CAN *
24 /* BE STARTED AGAIN *
25 /* *
26 /* SWITCH PRESETTINGS FOR START POINTS AND ENTRY POINTS: *
27 /* ===================================================== *
28 /* START POINT SWITCH PRESETTINGS *
29 /* ----------- ------------------ *
30 /* RESETCFOPT; *
31 /* *
32 /* ENTRY POINT SWITCH PRESETTINGS *
33 /* ----------- ------------------ *
34 /* M1 SETCFOPT:OFF=1&&11,SCOPE=GLOBAL; *
35 /* M3 SETCFOPT:OFF=1&3&&11,ON=2,SCOPE=GLOBAL; *
36 /* M7 SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL; *
37 /* *
38 /* FAULT 01 SETCFOPT:OFF=1&&11,SCOPE=GLOBAL; *
39 /* FAULT 02,03 SETCFOPT:OFF=1&3&&11,ON=2,SCOPE=GLOBAL; *
40 /* FAULT 04,05 SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL; *
41 /* *
42 /**********************************************************************
43 /
44 <SETCFOPT:ACKCFS=ERROR,DANCMD=EXEC,ACKREQ=POS,SCOPE=GLOBAL;
45 /
46 <SKIPCMD:LABEL=END,ON=1;
47 <SKIPCMD:LABEL=M3,ON=2;
48 <SKIPCMD:LABEL=M7,ON=3;
49 /
50 .M1 <STEP;

MMN:SW-COFIP-258 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

RCMAL

51 // ***************************
52 // * DISK SAVING OF MAL DATA *
53 // ***************************
54 /
55 <TRANS BUFFER:TYPE=MAL;
56 <SKIPCMD:LABEL=AB1,ON=32;
57 /
58 .M2 <STEP;
59 // ***********************************
60 // * DISPLAYING MAL DATA FILE STATUS *
61 // ***********************************
62 /
63 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
64 <DISP FILE:FILE=IA.ICMAL,ALL;
65 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
66 /
67 .M3 <STEP;
68 // ********************************************
69 // * LABELING MAL DATA RECORD TAPE (ORIGINAL) *
70 // ********************************************
71 /
72 <INIT MT:VSN=VSNNR1,MTD=00,CD=ISO,DENS=6250;
73 <SKIPCMD:LABEL=AB2,ON=32;
74 /
75 .M4 <STEP;
76 // *****************************************
77 // * RECORDING MAL DATA (ORIGINAL) STARTED *
78 // *****************************************
79 /
80 <TRANS FILE:VSNR=VSNNR1,FILE=KDEDATA.EWSD/IA.ICMAL,COPMOD=POST;
81 <SKIPCMD:LABEL=AB3,ON=32;
82 /
83 <REWIND MT:VSN=VSNNR1;
84 /
85 .M5 <STEP;
86 // ***************************************
87 // * RECORDING MAL DATA (ORIGINAL) ENDED *
88 // ***************************************
89 /
90 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
91 <DISP FILE:VSN=VSNNR1;
92 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
93 /
94 .M6 <STEP;
95 // *******************************************
96 // * REMOVE MAL DATA RECORD TAPE (ORIGINAL), *
97 // * MOUNT A LARGE TAPE WITH WRITE RING *
98 // * FOR RECORDING MAL DATA (COPY). *
99 // * *
100 // * START COMMAND FILE CG.SA.RCMAL AGAIN. *

A30808-X3080-C485-5-7620 MMN:SW-COFIP-259
MMN:SW Maintenance
Software

RCMAL

101 // *******************************************
102 /
103 <SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL;
104 <SKIPCMD:LABEL=END;
105 /
106 .M7 <STEP;
107 // ****************************************
108 // * LABELING MAL DATA RECORD TAPE (COPY) *
109 // ****************************************
110 /
111 <INIT MT:VSN=VSNNR2,MTD=00,CD=ISO,DENS=6250;
112 <SKIPCMD:LABEL=AB4,ON=32;
113 /
114 .M8 <STEP;
115 // *************************************
116 // * RECORDING MAL DATA (COPY) STARTED *
117 // *************************************
118 /
119 <TRANS FILE:VSNR=VSNNR2,FILE=KDEDATA.EWSD/IA.ICMAL,COPMOD=POST;
120 <SKIPCMD:LABEL=AB5,ON=32;
121 /
122 <REWIND MT:VSN=VSNNR2;
123 /
124 .M9 <STEP;
125 // ***********************************
126 // * RECORDING MAL DATA (COPY) ENDED *
127 // ***********************************
128 /
129 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
130 <DISP FILE:VSN=VSNNR2;
131 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
132 /
133 .MA <STEP;
134 // ************************************************
135 // * RELEASING RECORDED FILE AREA FOR OVERWRITING *
136 // ************************************************
137 /
138 <REL CYCFILE:FILE=IA.ICMAL;
139 /
140 .MB <STEP;
141 // ***********************************
142 // * DISPLAYING MAL DATA FILE STATUS *
143 // ***********************************
144 /
145 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
146 <DISP FILE:FILE=IA.ICMAL,ALL;
147 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
148 /
149 <SKIPCMD:LABEL=OUT;
150 / *******************************

MMN:SW-COFIP-260 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

RCMAL

151 / * FAULT EXITS AND END MESSAGE *

152 / *******************************
153 /
154 .AB1 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
155 <DISP FILE:FILE=IA.ICMAL,ALL;
156 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
157 // ****************
158 // *** FAULT 01 ***
159 // ****************
160 // **********************************************
161 // *** DISK SAVING OF MAL DATA NOT EXECUTED. ***
162 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
163 // *** ***
164 // *** START COMMAND FILE CG.SA.RCMAL AGAIN. ***
165 // **********************************************
166 /
167 <SETCFOPT:OFF=1&&11,SCOPE=GLOBAL;
168 <SKIPCMD:LABEL=END;
169 /
170 .AB2 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
171 // ****************
172 // *** FAULT 02 ***
173 // ****************
174 // **********************************************
175 // *** LABELING OF MAL DATA RECORD TAPE ***
176 // *** (ORIGINAL) NOT EXECUTED. ***
177 // *** TAPE DEVICE OFFLINE OR DEFECTIVE OR ***
178 // *** TAPE DAMAGED: ***
179 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
180 // *** ***
181 // *** START COMMAND FILE CG.SA.RCMAL AGAIN. ***
182 // **********************************************
183 /
184 <SETCFOPT:OFF=1&3&&11,ON=2,SCOPE=GLOBAL;
185 <SKIPCMD:LABEL=END;
186 /
187 .AB3 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
188 // ****************
189 // *** FAULT 03 ***
190 // ****************
191 // **********************************************
192 // *** RECORDING OF MAL DATA (ORIGINAL) ***
193 // *** NOT EXECUTED. ***
194 // *** ***
195 // *** CASE 1: ***
196 // *** ======= ***
197 // *** TAPE DAMAGED OR FILE NOT AVAILABLE, ***
198 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
199 // *** ***
200 // *** START COMMAND FILE CG.SA.RCMAL AGAIN. ***

A30808-X3080-C485-5-7620 MMN:SW-COFIP-261
MMN:SW Maintenance
Software

RCMAL

201 // *** ***

202 // *** CASE 2: ***
203 // *** ======= ***
204 // *** CORRESPONDING BACKGROUND MEMORY FILE ***
205 // *** IS EMPTY, ***
206 // *** CHECK PREREQUISITES: ***
207 // *** COMMAND TRANS FILE WAS NOT EXECUTED, ***
208 // *** ERROR: L FC 33. ***
209 // *** ***
210 // *** RECORDING OF MAL DATA IMPOSSIBLE. ***
211 // *** ***
212 // *** PROCEDURE IS FINISHED. ***
213 // **********************************************
214 /
215 <REWIND MT:VSN=VSNNR1;
216 /
217 <SETCFOPT:OFF=1&3&&11,ON=2,SCOPE=GLOBAL;
218 <SKIPCMD:LABEL=END;
219 /
220 .AB4 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
221 // ****************
222 // *** FAULT 04 ***
223 // ****************
224 // **********************************************
225 // *** LABELING OF MAL DATA RECORD TAPE ***
226 // *** (COPY) NOT EXECUTED. ***
227 // *** TAPE DEVICE OFFLINE OR DEFECTIVE OR ***
228 // *** TAPE DAMAGED: ***
229 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
230 // *** ***
231 // *** START COMMAND FILE CG.SA.RCMAL AGAIN. ***
232 // **********************************************
233 /
234 <SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL;
235 <SKIPCMD:LABEL=END;
236 /
237 .AB5 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
238 // ****************
239 // *** FAULT 05 ***
240 // ****************
241 // **********************************************
242 // *** RECORDING OF MAL DATA (COPY) ***
243 // *** NOT EXECUTED. ***
244 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
245 // *** ***
246 // *** START COMMAND FILE CG.SA.RCMAL AGAIN. ***
247 // **********************************************
248 /
249 <REWIND MT:VSN=VSNNR2;
250 /

MMN:SW-COFIP-262 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

RCMAL

251 <SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL;
252 <SKIPCMD:LABEL=END;
253 /
254 .OUT <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
255 /
256 // *******************************
257 // *** FINISHED WITHOUT FAULTS ***
258 // *******************************
259 // *******************************************
260 // *** REMOVE MAL DATA RECORD TAPE (COPY). ***
261 // *** ***
262 // *** MAL DATA RECORDING IS FINISHED. ***
263 // *******************************************
264 /
265 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
266 <SKIPCMD:LABEL=END;
267 /
268 .END <SETCFOPT:ACKCFS=ERROR,DANCMD=NOEXEC,ACKREQ=NEG,SCOPE=GLOBAL;
269 <ENDFILE;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-263
MMN:SW Maintenance
Software

RCMOB

1 <CMDFILE;
2 /
3 // 80-RCMOB-01
4 /
5 /****V01***************************************************************
6 /* *
7 /* COMMAND FILE CG.SA.RCMOB FOR RECORDING OF MOB DATA *
8 /* ================================================== *
9 /* *
10 /* TASK DESCRIPTION: *
11 /* ----------------- *
12 /* - RECORDING OF INDIVIDUAL CALL DATA *
13 /* *
14 /* HOLD TAPE READY/ LOADING MAGNETIC TAPE DEVICE: *
15 /* ---------------------------------------------- *
16 /* - TWO LARGE TAPES WITH WRITE RING ARE TO BE HELD READY *
17 /* - BEFORE STARTING THE COMMAND FILE THE MAGNETIC TAPE *
18 /* DEVICE IS TO BE LOADED AND SWITCHED TO ONLINE *
19 /* *
20 /* FAULT HANDLING: *
21 /* ----------------- *
22 /* - AFTER INTERRUPTION OF THE FILE PROCESSING VIA FAULT *
23 /* EXITS AND CORRESPONDING FAULT HANDLING THE FILE CAN *
24 /* BE STARTED AGAIN *
25 /* *
26 /* SWITCH PRESETTINGS FOR START POINTS AND ENTRY POINTS: *
27 /* ===================================================== *
28 /* START POINT SWITCH PRESETTINGS *
29 /* ----------- ------------------ *
30 /* RESETCFOPT; *
31 /* *
32 /* ENTRY POINT SWITCH PRESETTINGS *
33 /* ----------- ------------------ *
34 /* M1 SETCFOPT:OFF=1&&11,SCOPE=GLOBAL; *
35 /* M3 SETCFOPT:OFF=1&3&&11,ON=2,SCOPE=GLOBAL; *
36 /* M7 SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL; *
37 /* *
38 /* FAULT 01 SETCFOPT:OFF=1&&11,SCOPE=GLOBAL; *
39 /* FAULT 02,03 SETCFOPT:OFF=1&3&&11,ON=2,SCOPE=GLOBAL; *
40 /* FAULT 04,05 SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL; *
41 /* *
42 /**********************************************************************
43 /
44 <SETCFOPT:ACKCFS=ERROR,DANCMD=EXEC,ACKREQ=POS,SCOPE=GLOBAL;
45 /
46 <SKIPCMD:LABEL=END,ON=1;
47 <SKIPCMD:LABEL=M3,ON=2;
48 <SKIPCMD:LABEL=M7,ON=3;
49 /
50 .M1 <STEP;

MMN:SW-COFIP-264 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

RCMOB

51 // ************************
52 // * DISK SAVING MOB DATA *
53 // ************************
54 /
55 <TRANS BUFFER:TYPE=MOB;
56 <SKIPCMD:LABEL=AB1,ON=32;
57 /
58 .M2 <STEP;
59 // ***********************************
60 // * DISPLAYING MOB DATA FILE STATUS *
61 // ***********************************
62 /
63 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
64 <DISP FILE:FILE=IA.ICMOB,ALL;
65 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
66 /
67 .M3 <STEP;
68 // ********************************************
69 // * LABELING MOB DATA RECORD TAPE (ORIGINAL) *
70 // ********************************************
71 /
72 <INIT MT:VSN=VSNNR1,MTD=00,CD=ISO,DENS=6250;
73 <SKIPCMD:LABEL=AB2,ON=32;
74 /
75 .M4 <STEP;
76 // *****************************************
77 // * RECORDING MOB DATA (ORIGINAL) STARTED *
78 // *****************************************
79 /
80 <TRANS FILE:VSNR=VSNNR1,FILE=KDEDATA.EWSD/IA.ICMOB,COPMOD=POST;
81 <SKIPCMD:LABEL=AB3,ON=32;
82 /
83 <REWIND MT:VSN=VSNNR1;
84 /
85 .M5 <STEP;
86 // ***************************************
87 // * RECORDING MOB DATA (ORIGINAL) ENDED *
88 // ***************************************
89 /
90 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
91 <DISP FILE:VSN=VSNNR1;
92 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
93 /
94 .M6 <STEP;
95 // *******************************************
96 // * REMOVE MOB DATA RECORD TAPE (ORIGINAL), *
97 // * MOUNT A LARGE TAPE WITH WRITE RING *
98 // * FOR RECORDING MOB DATA (COPY). *
99 // * *
100 // * START COMMAND FILE CG.SA.RCMOB AGAIN. *

A30808-X3080-C485-5-7620 MMN:SW-COFIP-265
MMN:SW Maintenance
Software

RCMOB

101 // *******************************************
102 /
103 <SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL;
104 <SKIPCMD:LABEL=END;
105 /
106 .M7 <STEP;
107 // ****************************************
108 // * LABELING MOB DATA RECORD TAPE (COPY) *
109 // ****************************************
110 /
111 <INIT MT:VSN=VSNNR2,MTD=00,CD=ISO,DENS=6250;
112 <SKIPCMD:LABEL=AB4,ON=32;
113 /
114 .M8 <STEP;
115 // *************************************
116 // * RECORDING MOB DATA (COPY) STARTED *
117 // *************************************
118 /
119 <TRANS FILE:VSNR=VSNNR2,FILE=KDEDATA.EWSD/IA.ICMOB,COPMOD=POST;
120 <SKIPCMD:LABEL=AB5,ON=32;
121 /
122 <REWIND MT:VSN=VSNNR2;
123 /
124 .M9 <STEP;
125 // ***********************************
126 // * RECORDING MOB DATA (COPY) ENDED *
127 // ***********************************
128 /
129 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
130 <DISP FILE:VSN=VSNNR2;
131 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
132 /
133 .MA <STEP;
134 // ************************************************
135 // * RELEASING RECORDED FILE AREA FOR OVERWRITING *
136 // ************************************************
137 /
138 <REL CYCFILE:FILE=IA.ICMOB;
139 /
140 .MB <STEP;
141 // ***********************************
142 // * DISPLAYING MOB DATA FILE STATUS *
143 // ***********************************
144 /
145 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
146 <DISP FILE:FILE=IA.ICMOB,ALL;
147 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
148 /
149 <SKIPCMD:LABEL=OUT;
150 / *******************************

MMN:SW-COFIP-266 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

RCMOB

151 / * FAULT EXITS AND END MESSAGE *

152 / *******************************
153 /
154 .AB1 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
155 <DISP FILE:FILE=IA.ICMOB,ALL;
156 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
157 // ****************
158 // *** FAULT 01 ***
159 // ****************
160 // **********************************************
161 // *** DISK SAVING OF MOB DATA NOT EXECUTED. ***
162 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
163 // *** ***
164 // *** START COMMAND FILE CG.SA.RCMOB AGAIN. ***
165 // **********************************************
166 /
167 <SETCFOPT:OFF=1&&11,SCOPE=GLOBAL;
168 <SKIPCMD:LABEL=END;
169 /
170 .AB2 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
171 // ****************
172 // *** FAULT 02 ***
173 // ****************
174 // **********************************************
175 // *** LABELING OF MOB DATA RECORD TAPE ***
176 // *** (ORIGINAL) NOT EXECUTED. ***
177 // *** TAPE DEVICE OFFLINE OR DEFECTIVE OR ***
178 // *** TAPE DAMAGED: ***
179 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
180 // *** ***
181 // *** START COMMAND FILE CG.SA.RCMOB AGAIN. ***
182 // **********************************************
183 /
184 <SETCFOPT:OFF=1&3&&11,ON=2,SCOPE=GLOBAL;
185 <SKIPCMD:LABEL=END;
186 /
187 .AB3 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
188 // ****************
189 // *** FAULT 03 ***
190 // ****************
191 // **********************************************
192 // *** RECORDING OF MOB DATA (ORIGINAL) ***
193 // *** NOT EXECUTED. ***
194 // *** ***
195 // *** CASE 1: ***
196 // *** ======= ***
197 // *** TAPE DAMAGED OR FILE NOT AVAILABLE, ***
198 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
199 // *** ***
200 // *** START COMMAND FILE CG.SA.RCMOB AGAIN. ***

A30808-X3080-C485-5-7620 MMN:SW-COFIP-267
MMN:SW Maintenance
Software

RCMOB

201 // *** ***

202 // *** CASE 2: ***
203 // *** ======= ***
204 // *** CORRESPONDING BACKGROUND MEMORY FILE ***
205 // *** IS EMPTY, ***
206 // *** CHECK PREREQUISITES: ***
207 // *** COMMAND TRANS FILE WAS NOT EXECUTED, ***
208 // *** ERROR: L FC 33. ***
209 // *** ***
210 // *** RECORDING OF MOB DATA IMPOSSIBLE. ***
211 // *** ***
212 // *** PROCEDURE IS FINISHED. ***
213 // **********************************************
214 /
215 <REWIND MT:VSN=VSNNR1;
216 /
217 <SETCFOPT:OFF=1&3&&11,ON=2,SCOPE=GLOBAL;
218 <SKIPCMD:LABEL=END;
219 /
220 .AB4 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
221 // ****************
222 // *** FAULT 04 ***
223 // ****************
224 // **********************************************
225 // *** LABELING OF MOB DATA RECORD TAPE ***
226 // *** (COPY) NOT EXECUTED. ***
227 // *** TAPE DEVICE OFFLINE OR DEFECTIVE OR ***
228 // *** TAPE DAMAGED: ***
229 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
230 // *** ***
231 // *** START COMMAND FILE CG.SA.RCMOB AGAIN. ***
232 // **********************************************
233 /
234 <SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL;
235 <SKIPCMD:LABEL=END;
236 /
237 .AB5 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
238 // ****************
239 // *** FAULT 05 ***
240 // ****************
241 // **********************************************
242 // *** RECORDING OF MOB DATA (COPY) ***
243 // *** NOT EXECUTED. ***
244 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
245 // *** ***
246 // *** START COMMAND FILE CG.SA.RCMOB AGAIN. ***
247 // **********************************************
248 /
249 <REWIND MT:VSN=VSNNR2;
250 /

MMN:SW-COFIP-268 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

RCMOB

251 <SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL;
252 <SKIPCMD:LABEL=END;
253 /
254 .OUT <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
255 /
256 // *******************************
257 // *** FINISHED WITHOUT FAULTS ***
258 // *******************************
259 // *******************************************
260 // *** REMOVE MOB DATA RECORD TAPE (COPY). ***
261 // *** ***
262 // *** MOB DATA RECORDING IS FINISHED. ***
263 // *******************************************
264 /
265 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
266 <SKIPCMD:LABEL=END;
267 /
268 .END <SETCFOPT:ACKCFS=ERROR,DANCMD=NOEXEC,ACKREQ=NEG,SCOPE=GLOBAL;
269 <ENDFILE;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-269
MMN:SW Maintenance
Software

RCPMB

1 <CMDFILE;
2 /
3 // 80-RCPMB-01
4 /
5 /****V01***************************************************************
6 /* *
7 /* COMMAND FILE CG.SA.RCPMB FOR RECORDING OF PREV. METER OBS. DATA *
8 /* =============================================================== *
9 /* *
10 /* TASK DESCRIPTION: *
11 /* ----------------- *
12 /* - RECORDING OF PREV. METER OBSERVATION DATA *
13 /* *
14 /* HOLD TAPE READY/ LOADING MAGNETIC TAPE DEVICE: *
15 /* ---------------------------------------------- *
16 /* - TWO LARGE TAPES WITH WRITE RING ARE TO BE HELD READY *
17 /* - BEFORE STARTING THE COMMAND FILE THE MAGNETIC TAPE *
18 /* DEVICE IS TO BE LOADED AND SWITCHED TO ONLINE *
19 /* *
20 /* FAULT HANDLING: *
21 /* ----------------- *
22 /* - AFTER INTERRUPTION OF THE FILE PROCESSING VIA FAULT *
23 /* EXITS AND CORRESPONDING FAULT HANDLING THE FILE CAN *
24 /* BE STARTED AGAIN *
25 /* *
26 /* SWITCH PRESETTINGS FOR START POINTS AND ENTRY POINTS: *
27 /* ===================================================== *
28 /* START POINT SWITCH PRESETTINGS *
29 /* ----------- ------------------ *
30 /* RESETCFOPT; *
31 /* *
32 /* ENTRY POINT SWITCH PRESETTINGS *
33 /* ------------ ------------------ *
34 /* M1 SETCFOPT:OFF=1&&11,SCOPE=GLOBAL; *
35 /* M3 SETCFOPT:OFF=1&3&&11,ON=2,SCOPE=GLOBAL; *
36 /* M7 SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL; *
37 /* *
38 /* FAULT 01 SETCFOPT:OFF=1&&11,SCOPE=GLOBAL; *
39 /* FAULT 02,03 SETCFOPT:OFF=1&3&&11,ON=2,SCOPE=GLOBAL; *
40 /* FAULT 04,05 SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL; *
41 /* *
42 /**********************************************************************
43 /
44 <SETCFOPT:ACKCFS=ERROR,DANCMD=EXEC,ACKREQ=POS,SCOPE=GLOBAL;
45 /
46 <SKIPCMD:LABEL=END,ON=1;
47 <SKIPCMD:LABEL=M3,ON=2;
48 <SKIPCMD:LABEL=M7,ON=3;
49 /
50 .M1 <STEP;

MMN:SW-COFIP-270 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

RCPMB

51 // ***************************
52 // * DISK SAVING OF PMB DATA *
53 // ***************************
54 /
55 <TRANS BUFFER:TYPE=PMOB;
56 <SKIPCMD:LABEL=AB1,ON=32;
57 /
58 .M2 <STEP;
59 // ***********************************
60 // * DISPLAYING PMB DATA FILE STATUS *
61 // ***********************************
62 /
63 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
64 <DISP FILE:FILE=IA.ICPMB,ALL;
65 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
66 /
67 .M3 <STEP;
68 // ********************************************
69 // * LABELING PMB DATA RECORD TAPE (ORIGINAL) *
70 // ********************************************
71 /
72 <INIT MT:VSN=VSNNR1,MTD=00,CD=ISO,DENS=6250;
73 <SKIPCMD:LABEL=AB2,ON=32;
74 /
75 .M4 <STEP;
76 // *****************************************
77 // * RECORDING PMB DATA (ORIGINAL) STARTED *
78 // *****************************************
79 /
80 <TRANS FILE:VSNR=VSNNR1,FILE=KDEDATA.EWSD/IA.ICPMB,COPMOD=POST;
81 <SKIPCMD:LABEL=AB3,ON=32;
82 /
83 <REWIND MT:VSN=VSNNR1;
84 /
85 .M5 <STEP;
86 // ***************************************
87 // * RECORDING PMB DATA (ORIGINAL) ENDED *
88 // ***************************************
89 /
90 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
91 <DISP FILE:VSN=VSNNR1;
92 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
93 /
94 .M6 <STEP;
95 /
96 // *******************************************
97 // * REMOVE PMB DATA RECORD TAPE (ORIGINAL), *
98 // * MOUNT A LARGE TAPE WITH WRITE RING *
99 // * FOR RECORDING PMB DATA (COPY). *
100 // * *

A30808-X3080-C485-5-7620 MMN:SW-COFIP-271
MMN:SW Maintenance
Software

RCPMB

101 // * START COMMAND FILE CG.SA.RCPMB AGAIN. *

102 // *******************************************
103 /
104 <SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL;
105 <SKIPCMD:LABEL=END;
106 /
107 .M7 <STEP;
108 // ****************************************
109 // * LABELING PMB DATA RECORD TAPE (COPY) *
110 // ****************************************
111 /
112 <INIT MT:VSN=VSNNR2,MTD=00,CD=ISO,DENS=6250;
113 <SKIPCMD:LABEL=AB4,ON=32;
114 /
115 .M8 <STEP;
116 // *************************************
117 // * RECORDING PMB DATA (COPY) STARTED *
118 // *************************************
119 /
120 <TRANS FILE:VSNR=VSNNR2,FILE=KDEDATA.EWSD/IA.ICPMB,COPMOD=POST;
121 <SKIPCMD:LABEL=AB5,ON=32;
122 /
123 <REWIND MT:VSN=VSNNR2;
124 /
125 .M9 <STEP;
126 // ***********************************
127 // * RECORDING PMB DATA (COPY) ENDED *
128 // ***********************************
129 /
130 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
131 <DISP FILE:VSN=VSNNR2;
132 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
133 /
134 .MA <STEP;
135 // ************************************************
136 // * RELEASING RECORDED FILE AREA FOR OVERWRITING *
137 // ************************************************
138 /
139 <REL CYCFILE:FILE=IA.ICPMB;
140 /
141 .MB <STEP;
142 // ***********************************
143 // * DISPLAYING PMB DATA FILE STATUS *
144 // ***********************************
145 /
146 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
147 <DISP FILE:FILE=IA.ICPMB,ALL;
148 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
149 /
150 <SKIPCMD:LABEL=OUT;

MMN:SW-COFIP-272 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

RCPMB

151 / *******************************
152 / * FAULT EXITS AND END MESSAGE *
153 / *******************************
154 /
155 .AB1 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
156 <DISP FILE:FILE=IA.ICPMB,ALL;
157 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
158 // ****************
159 // *** FAULT 01 ***
160 // ****************
161 // **********************************************
162 // *** DISK SAVING OF PMB DATA NOT EXECUTED. ***
163 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
164 // *** ***
165 // *** START COMMAND FILE CG.SA.RCPMB AGAIN. ***
166 // **********************************************
167 /
168 <SETCFOPT:OFF=1&&11,SCOPE=GLOBAL;
169 <SKIPCMD:LABEL=END;
170 /
171 .AB2 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
172 // ****************
173 // *** FAULT 02 ***
174 // ****************
175 // **********************************************
176 // *** LABELING OF PMB DATA RECORD TAPE ***
177 // *** (ORIGINAL) NOT EXECUTED. ***
178 // *** TAPE DEVICE OFFLINE OR DEFECTIVE OR ***
179 // *** TAPE DAMAGED: ***
180 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
181 // *** ***
182 // *** START COMMAND FILE CG.SA.RCPMB AGAIN. ***
183 // **********************************************
184 /
185 <SETCFOPT:OFF=1&3&&11,ON=2,SCOPE=GLOBAL;
186 <SKIPCMD:LABEL=END;
187 /
188 .AB3 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
189 // ****************
190 // *** FAULT 03 ***
191 // ****************
192 // **********************************************
193 // *** RECORDING OF PMB DATA (ORIGINAL) ***
194 // *** NOT EXECUTED. ***
195 // *** ***
196 // *** CASE 1: ***
197 // *** ======= ***
198 // *** TAPE DAMAGED OR FILE NOT AVAILABLE, ***
199 // *** CHECK PREREQUISITES, ELIMINATE FAULTS, ***
200 // *** ***

A30808-X3080-C485-5-7620 MMN:SW-COFIP-273
MMN:SW Maintenance
Software

RCPMB

201 // *** START COMMAND FILE CG.SA.RCPMB AGAIN. ***

202 // *** ***
203 // *** CASE 2: ***
204 // *** ======= ***
205 // *** CORRESPONDING BACKGROUND MEMORY FILE ***
206 // *** IS EMPTY, ***
207 // *** CHECK PREREQUISITES: ***
208 // *** COMMAND TRANS FILE WAS NOT EXECUTED, ***
209 // *** ERROR: L FC 33. ***
210 // *** ***
211 // *** RECORDING OF PMB DATA IMPOSSIBLE. ***
212 // *** ***
213 // *** PROCEDURE IS FINISHED. ***
214 // **********************************************
215 /
216 <REWIND MT:VSN=VSNNR1;
217 /
218 <SETCFOPT:OFF=1&3&&11,ON=2,SCOPE=GLOBAL;
219 <SKIPCMD:LABEL=END;
220 /
221 .AB4 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
222 // ****************
223 // *** FAULT 04 ***
224 // ****************
225 // **********************************************
226 // *** LABELING OF PMB DATA RECORD TAPE ***
227 // *** (COPY) NOT EXECUTED. ***
228 // *** TAPE DEVICE OFFLINE OR DEFECTIVE OR ***
229 // *** TAPE DAMAGED: ***
230 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
231 // *** ***
232 // *** START COMMAND FILE CG.SA.RCPMB AGAIN. ***
233 // **********************************************
234 /
235 <SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL;
236 <SKIPCMD:LABEL=END;
237 /
238 .AB5 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
239 // ****************
240 // *** FAULT 05 ***
241 // ****************
242 // **********************************************
243 // *** RECORDING OF PMB DATA (COPY) ***
244 // *** NOT EXECUTED. ***
245 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
246 // *** ***
247 // *** START COMMAND FILE CG.SA.RCPMB AGAIN. ***
248 // **********************************************
249 /
250 <REWIND MT:VSN=VSNNR2;

MMN:SW-COFIP-274 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

RCPMB

251 /
252 <SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL;
253 <SKIPCMD:LABEL=END;
254 /
255 .OUT <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
256 /
257 // *******************************
258 // *** FINISHED WITHOUT FAULTS ***
259 // *******************************
260 // *******************************************
261 // *** REMOVE PMB DATA RECORD TAPE (COPY). ***
262 // *** ***
263 // *** PMB DATA RECORDING IS FINISHED. ***
264 // *******************************************
265 /
266 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
267 <SKIPCMD:LABEL=END;
268 /
269 .END <SETCFOPT:ACKCFS=ERROR,DANCMD=NOEXEC,ACKREQ=NEG,SCOPE=GLOBAL;
270 <ENDFILE;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-275
MMN:SW Maintenance
Software

RCTOB

1 <CMDFILE;
2 /
3 // 80-RCTOB-01
4 /
5 /****V01***************************************************************
6 /* *
7 /* COMMAND FILE CG.SA.RCTOB FOR RECORDING OF TOB DATA *
8 /* ================================================== *
9 /* *
10 /* TASK DESCRIPTION: *
11 /* ----------------- *
12 /* - RECORDING OF TRAFFIC DATA *
13 /* *
14 /* HOLD TAPE READY/ LOADING MAGNETIC TAPE DEVICE: *
15 /* ---------------------------------------------- *
16 /* - TWO LARGE TAPES WITH WRITE RING ARE TO BE HELD READY *
17 /* - BEFORE STARTING THE COMMAND FILE THE MAGNETIC TAPE *
18 /* DEVICE IS TO BE LOADED AND SWITCHED TO ONLINE *
19 /* *
20 /* FAULT HANDLING: *
21 /* ----------------- *
22 /* - AFTER INTERRUPTION OF THE FILE PROCESSING VIA FAULT *
23 /* EXITS AND CORRESPONDING FAULT HANDLING THE FILE CAN *
24 /* BE STARTED AGAIN *
25 /* *
26 /* SWITCH PRESETTINGS FOR START POINTS AND ENTRY POINTS: *
27 /* ===================================================== *
28 /* START POINT SWITCH PRESETTINGS *
29 /* ----------- ------------------ *
30 /* RESETCFOPT; *
31 /* *
32 /* ENTRY POINT SWITCH PRESETTINGS *
33 /* ------------ ------------------ *
34 /* M1 SETCFOPT:OFF=1&&11,SCOPE=GLOBAL; *
35 /* M3 SETCFOPT:OFF=1&3&&11,ON=2,SCOPE=GLOBAL; *
36 /* M7 SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL; *
37 /* *
38 /* FAULT 01 SETCFOPT:OFF=1&&11,SCOPE=GLOBAL; *
39 /* FAULT 02,03 SETCFOPT:OFF=1&3&&11,ON=2,SCOPE=GLOBAL; *
40 /* FAULT 04,05 SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL; *
41 /* *
42 /**********************************************************************
43 /
44 <SETCFOPT:ACKCFS=ERROR,DANCMD=EXEC,ACKREQ=POS,SCOPE=GLOBAL;
45 /
46 <SKIPCMD:LABEL=END,ON=1;
47 <SKIPCMD:LABEL=M3,ON=2;
48 <SKIPCMD:LABEL=M7,ON=3;
49 /
50 .M1 <STEP;

MMN:SW-COFIP-276 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

RCTOB

51 // ***************************
52 // * DISK SAVING OF TOB DATA *
53 // ***************************
54 /
55 <TRANS BUFFER:TYPE=TOB;
56 <SKIPCMD:LABEL=AB1,ON=32;
57 /
58 .M2 <STEP;
59 // ***********************************
60 // * DISPLAYING TOB DATA FILE STATUS *
61 // ***********************************
62 /
63 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
64 <DISP FILE:FILE=IA.ICTOB,ALL;
65 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
66 /
67 .M3 <STEP;
68 // ********************************************
69 // * LABELING TOB DATA RECORD TAPE (ORIGINAL) *
70 // ********************************************
71 /
72 <INIT MT:VSN=VSNNR1,MTD=00,CD=ISO,DENS=6250;
73 <SKIPCMD:LABEL=AB2,ON=32;
74 /
75 .M4 <STEP;
76 // *****************************************
77 // * RECORDING TOB DATA (ORIGINAL) STARTED *
78 // *****************************************
79 /
80 <TRANS FILE:VSNR=VSNNR1,FILE=KDEDATA.EWSD/IA.ICTOB,COPMOD=POST;
81 <SKIPCMD:LABEL=AB3,ON=32;
82 /
83 <REWIND MT:VSN=VSNNR1;
84 /
85 .M5 <STEP;
86 // ***************************************
87 // * RECORDING TOB DATA (ORIGINAL) ENDED *
88 // ***************************************
89 /
90 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
91 <DISP FILE:VSN=VSNNR1;
92 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
93 /
94 .M6 <STEP;
95 // *******************************************
96 // * REMOVE TOB DATA RECORD TAPE (ORIGINAL), *
97 // * MOUNT A LARGE TAPE WITH WRITE RING *
98 // * FOR RECORDING TOB DATA (COPY). *
99 // * *
100 // * START COMMAND FILE CG.SA.RCTOB AGAIN. *

A30808-X3080-C485-5-7620 MMN:SW-COFIP-277
MMN:SW Maintenance
Software

RCTOB

101 // *******************************************
102 /
103 <SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL;
104 <SKIPCMD:LABEL=END;
105 /
106 .M7 <STEP;
107 // ****************************************
108 // * LABELING TOB DATA RECORD TAPE (COPY) *
109 // ****************************************
110 /
111 <INIT MT:VSN=VSNNR2,MTD=00,CD=ISO,DENS=6250;
112 <SKIPCMD:LABEL=AB4,ON=32;
113 /
114 .M8 <STEP;
115 // *************************************
116 // * RECORDING TOB DATA (COPY) STARTED *
117 // *************************************
118 /
119 <TRANS FILE:VSNR=VSNNR2,FILE=KDEDATA.EWSD/IA.ICTOB,COPMOD=POST;
120 <SKIPCMD:LABEL=AB5,ON=32;
121 /
122 <REWIND MT:VSN=VSNNR2;
123 /
124 .M9 <STEP;
125 // ***********************************
126 // * RECORDING TOB DATA (COPY) ENDED *
127 // ***********************************
128 /
129 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
130 <DISP FILE:VSN=VSNNR2;
131 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
132 /
133 .MA <STEP;
134 // ************************************************
135 // * RELEASING RECORDED FILE AREA FOR OVERWRITING *
136 // ************************************************
137 /
138 <REL CYCFILE:FILE=IA.ICTOB;
139 /
140 .MB <STEP;
141 // ***********************************
142 // * DISPLAYING TOB DATA FILE STATUS *
143 // ***********************************
144 /
145 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
146 <DISP FILE:FILE=IA.ICTOB,ALL;
147 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
148 /
149 <SKIPCMD:LABEL=OUT;
150 / *******************************

MMN:SW-COFIP-278 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

RCTOB

151 / * FAULT EXITS AND END MESSAGE *

152 / *******************************
153 /
154 .AB1 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
155 <DISP FILE:FILE=IA.ICTOB,ALL;
156 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
157 // ****************
158 // *** FAULT 01 ***
159 // ****************
160 // **********************************************
161 // *** DISK SAVING OF TOB DATA NOT EXECUTED. ***
162 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
163 // *** ***
164 // *** START COMMAND FILE CG.SA.RCTOB AGAIN. ***
165 // **********************************************
166 /
167 <SETCFOPT:OFF=1&&11,SCOPE=GLOBAL;
168 <SKIPCMD:LABEL=END;
169 /
170 .AB2 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
171 // ****************
172 // *** FAULT 02 ***
173 // ****************
174 // **********************************************
175 // *** LABELING OF TOB DATA RECORD TAPE ***
176 // *** (ORIGINAL) NOT EXECUTED. ***
177 // *** TAPE DEVICE OFFLINE OR DEFECTIVE OR ***
178 // *** TAPE DAMAGED: ***
179 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
180 // *** ***
181 // *** START COMMAND FILE CG.SA.RCTOB AGAIN. ***
182 // **********************************************
183 /
184 <SETCFOPT:OFF=1&3&&11,ON=2,SCOPE=GLOBAL;
185 <SKIPCMD:LABEL=END;
186 /
187 .AB3 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
188 // ****************
189 // *** FAULT 03 ***
190 // ****************
191 // **********************************************
192 // *** RECORDING OF TOB DATA (ORIGINAL) ***
193 // *** NOT EXECUTED. ***
194 // *** ***
195 // *** CASE 1: ***
196 // *** ======= ***
197 // *** TAPE DAMAGED OR FILE NOT AVAILABLE, ***
198 // *** CHECK PREREQUISITES, ELIMINATE FAULTS, ***
199 // *** ***
200 // *** START COMMAND FILE CG.SA.RCTOB AGAIN. ***

A30808-X3080-C485-5-7620 MMN:SW-COFIP-279
MMN:SW Maintenance
Software

RCTOB

201 // *** ***

202 // *** CASE 2: ***
203 // *** ======= ***
204 // *** CORRESPONDING BACKGROUND MEMORY FILE ***
205 // *** IS EMPTY, ***
206 // *** CHECK PREREQUISITES: ***
207 // *** COMMAND TRANS FILE WAS NOT EXECUTED, ***
208 // *** ERROR: L FC 33. ***
209 // *** ***
210 // *** RECORDING OF TOB DATA IMPOSSIBLE. ***
211 // *** ***
212 // *** PROCEDURE IS FINISHED. ***
213 // **********************************************
214 /
215 <REWIND MT:VSN=VSNNR1;
216 /
217 <SETCFOPT:OFF=1&3&&11,ON=2,SCOPE=GLOBAL;
218 <SKIPCMD:LABEL=END;
219 /
220 .AB4 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
221 // ****************
222 // *** FAULT 04 ***
223 // ****************
224 // **********************************************
225 // *** LABELING OF TOB DATA RECORD TAPE ***
226 // *** (COPY) NOT EXECUTED. ***
227 // *** TAPE DEVICE OFFLINE OR DEFECTIVE OR ***
228 // *** TAPE DAMAGED: ***
229 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
230 // *** ***
231 // *** START COMMAND FILE CG.SA.RCTOB AGAIN. ***
232 // **********************************************
233 /
234 <SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL;
235 <SKIPCMD:LABEL=END;
236 /
237 .AB5 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
238 // ****************
239 // *** FAULT 05 ***
240 // ****************
241 // **********************************************
242 // *** RECORDING OF TOB DATA (COPY) ***
243 // *** NOT EXECUTED. ***
244 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
245 // *** ***
246 // *** START COMMAND FILE CG.SA.RCTOB AGAIN. ***
247 // **********************************************
248 /
249 <REWIND MT:VSN=VSNNR2;
250 /

MMN:SW-COFIP-280 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

RCTOB

251 <SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL;
252 <SKIPCMD:LABEL=END;
253 /
254 .OUT <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
255 /
256 // *******************************
257 // *** FINISHED WITHOUT FAULTS ***
258 // *******************************
259 // *******************************************
260 // *** REMOVE TOB DATA RECORD TAPE (COPY). ***
261 // *** ***
262 // *** TOB DATA RECORDING IS FINISHED. ***
263 // *******************************************
264 /
265 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
266 <SKIPCMD:LABEL=END;
267 /
268 .END <SETCFOPT:ACKCFS=ERROR,DANCMD=NOEXEC,ACKREQ=NEG,SCOPE=GLOBAL;
269 <ENDFILE;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-281
MMN:SW Maintenance
Software

RCTST

1 <CMDFILE;
2 /
3 // 80-RCTST-01
4 /
5 /****V01***************************************************************
6 /* *
7 /* COMMAND FILE CG.SA.RCTST FOR RECORDING OF TST DATA *
8 /* ================================================== *
9 /* *
10 /* TASK DESCRIPTION: *
11 /* ----------------- *
12 /* - RECORDING OF TRAFFIC STRUCTURE DATA *
13 /* *
14 /* HOLD TAPE READY/ LOADING MAGNETIC TAPE DEVICE: *
15 /* ---------------------------------------------- *
16 /* - TWO LARGE TAPES WITH WRITE RING ARE TO BE HELD READY *
17 /* - BEFORE STARTING THE COMMAND FILE THE MAGNETIC TAPE *
18 /* DEVICE IS TO BE LOADED AND SWITCHED TO ONLINE *
19 /* *
20 /* FAULT HANDLING: *
21 /* ----------------- *
22 /* - AFTER INTERRUPTION OF THE FILE PROCESSING VIA FAULT *
23 /* EXITS AND CORRESPONDING FAULT HANDLING THE FILE CAN *
24 /* BE STARTED AGAIN *
25 /* *
26 /* SWITCH PRESETTINGS FOR START POINTS AND ENTRY POINTS: *
27 /* ===================================================== *
28 /* START POINT SWITCH PRESETTINGS *
29 /* ----------- ------------------ *
30 /* RESETCFOPT; *
31 /* *
32 /* ENTRY POINT SWITCH PRESETTINGS *
33 /* ------------ ------------------ *
34 /* M1 SETCFOPT:OFF=1&&11,SCOPE=GLOBAL; *
35 /* M3 SETCFOPT:OFF=1&3&&11,ON=2,SCOPE=GLOBAL; *
36 /* M7 SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL; *
37 /* *
38 /* FAULT 01 SETCFOPT:OFF=1&&11,SCOPE=GLOBAL; *
39 /* FAULT 02,03 SETCFOPT:OFF=1&3&&11,ON=2,SCOPE=GLOBAL; *
40 /* FAULT 04,05 SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL; *
41 /* *
42 /**********************************************************************
43 /
44 <SETCFOPT:ACKCFS=ERROR,DANCMD=EXEC,ACKREQ=POS,SCOPE=GLOBAL;
45 /
46 <SKIPCMD:LABEL=END,ON=1;
47 <SKIPCMD:LABEL=M3,ON=2;
48 <SKIPCMD:LABEL=M7,ON=3;
49 /
50 .M1 <STEP;

MMN:SW-COFIP-282 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

RCTST

51 // ***************************
52 // * DISK SAVING OF TST DATA *
53 // ***************************
54 /
55 <TRANS BUFFER:TYPE=TST;
56 <SKIPCMD:LABEL=AB1,ON=32;
57 /
58 .M2 <STEP;
59 // ***********************************
60 // * DISPLAYING TST DATA FILE STATUS *
61 // ***********************************
62 /
63 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
64 <DISP FILE:FILE=IA.ICTST,ALL;
65 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
66 /
67 .M3 <STEP;
68 // ********************************************
69 // * LABELING TST DATA RECORD TAPE (ORIGINAL) *
70 // ********************************************
71 /
72 <INIT MT:VSN=VSNNR1,MTD=00,CD=ISO,DENS=6250;
73 <SKIPCMD:LABEL=AB2,ON=32;
74 /
75 .M4 <STEP;
76 // *****************************************
77 // * RECORDING TST DATA (ORIGINAL) STARTED *
78 // *****************************************
79 /
80 <TRANS FILE:VSNR=VSNNR1,FILE=KDEDATA.EWSD/IA.ICTST,COPMOD=POST;
81 <SKIPCMD:LABEL=AB3,ON=32;
82 /
83 <REWIND MT:VSN=VSNNR1;
84 /
85 .M5 <STEP;
86 // ***************************************
87 // * RECORDING TST DATA (ORIGINAL) ENDED *
88 // ***************************************
89 /
90 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
91 <DISP FILE:VSN=VSNNR1;
92 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
93 /
94 .M6 <STEP;
95 // *******************************************
96 // * REMOVE TST DATA RECORD TAPE (ORIGINAL), *
97 // * MOUNT A LARGE TAPE WITH WRITE RING *
98 // * FOR RECORDING TST DATA (COPY). *
99 // * *
100 // * START COMMAND FILE CG.SA.RCTST AGAIN. *

A30808-X3080-C485-5-7620 MMN:SW-COFIP-283
MMN:SW Maintenance
Software

RCTST

101 // *******************************************
102 /
103 <SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL;
104 <SKIPCMD:LABEL=END;
105 /
106 .M7 <STEP;
107 // ****************************************
108 // * LABELING TST DATA RECORD TAPE (COPY) *
109 // ****************************************
110 /
111 <INIT MT:VSN=VSNNR2,MTD=00,CD=ISO,DENS=6250;
112 <SKIPCMD:LABEL=AB4,ON=32;
113 /
114 .M8 <STEP;
115 // *************************************
116 // * RECORDING TST DATA (COPY) STARTED *
117 // *************************************
118 /
119 <TRANS FILE:VSNR=VSNNR2,FILE=KDEDATA.EWSD/IA.ICTST,COPMOD=POST;
120 <SKIPCMD:LABEL=AB5,ON=32;
121 /
122 <REWIND MT:VSN=VSNNR2;
123 /
124 .M9 <STEP;
125 // ***********************************
126 // * RECORDING TST DATA (COPY) ENDED *
127 // ***********************************
128 /
129 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
130 <DISP FILE:VSN=VSNNR2;
131 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
132 /
133 .MA <STEP;
134 // ************************************************
135 // * RELEASING RECORDED FILE AREA FOR OVERWRITING *
136 // ************************************************
137 /
138 <REL CYCFILE:FILE=IA.ICTST;
139 /
140 .MB <STEP;
141 // ***********************************
142 // * DISPLAYING TST DATA FILE STATUS *
143 // ***********************************
144 /
145 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
146 <DISP FILE:FILE=IA.ICTST,ALL;
147 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
148 /
149 <SKIPCMD:LABEL=OUT;
150 / *******************************

MMN:SW-COFIP-284 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

RCTST

151 / * FAULT EXITS AND END MESSAGE *

152 / *******************************
153 /
154 .AB1 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
155 <DISP FILE:FILE=IA.ICTST,ALL;
156 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
157 // ****************
158 // *** FAULT 01 ***
159 // ****************
160 // **********************************************
161 // *** DISK SAVING OF TST DATA NOT EXECUTED. ***
162 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
163 // *** ***
164 // *** START COMMAND FILE CG.SA.RCTST AGAIN. ***
165 // **********************************************
166 /
167 <SETCFOPT:OFF=1&&11,SCOPE=GLOBAL;
168 <SKIPCMD:LABEL=END;
169 /
170 .AB2 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
171 // ****************
172 // *** FAULT 02 ***
173 // ****************
174 // **********************************************
175 // *** LABELING OF TST DATA RECORD TAPE ***
176 // *** (ORIGINAL) NOT EXECUTED. ***
177 // *** TAPE DEVICE OFFLINE OR DEFECTIVE OR ***
178 // *** TAPE DAMAGED: ***
179 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
180 // *** ***
181 // *** START COMMAND FILE CG.SA.RCTST AGAIN. ***
182 // **********************************************
183 /
184 <SETCFOPT:OFF=1&3&&11,ON=2,SCOPE=GLOBAL;
185 <SKIPCMD:LABEL=END;
186 /
187 .AB3 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
188 // ****************
189 // *** FAULT 03 ***
190 // ****************
191 // **********************************************
192 // *** RECORDING OF TST DATA (ORIGINAL) ***
193 // *** NOT EXECUTED. ***
194 // *** ***
195 // *** CASE 1: ***
196 // *** ======= ***
197 // *** TAPE DAMAGED OR FILE NOT AVAILABLE, ***
198 // *** CHECK PREREQUISITES, ELIMINATE FAULTS, ***
199 // *** ***
200 // *** START COMMAND FILE CG.SA.RCTST AGAIN. ***

A30808-X3080-C485-5-7620 MMN:SW-COFIP-285
MMN:SW Maintenance
Software

RCTST

201 // *** ***

202 // *** CASE 2: ***
203 // *** ======= ***
204 // *** CORRESPONDING BACKGROUND MEMORY FILE ***
205 // *** IS EMPTY, ***
206 // *** CHECK PREREQUISITES: ***
207 // *** COMMAND TRANS FILE WAS NOT EXECUTED, ***
208 // *** ERROR: L FC 33. ***
209 // *** ***
210 // *** RECORDING OF TST DATA IMPOSSIBLE. ***
211 // *** ***
212 // *** PROCEDURE IS FINISHED. ***
213 // **********************************************
214 /
215 <REWIND MT:VSN=VSNNR1;
216 /
217 <SETCFOPT:OFF=1&3&&11,ON=2,SCOPE=GLOBAL;
218 <SKIPCMD:LABEL=END;
219 /
220 .AB4 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
221 // ****************
222 // *** FAULT 04 ***
223 // ****************
224 // **********************************************
225 // *** LABELING OF TST DATA RECORD TAPE ***
226 // *** (COPY) NOT EXECUTED. ***
227 // *** TAPE DEVICE OFFLINE OR DEFECTIVE OR ***
228 // *** TAPE DAMAGED: ***
229 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
230 // *** ***
231 // *** START COMMAND FILE CG.SA.RCTST AGAIN. ***
232 // **********************************************
233 /
234 <SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL;
235 <SKIPCMD:LABEL=END;
236 /
237 .AB5 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
238 // ****************
239 // *** FAULT 05 ***
240 // ****************
241 // **********************************************
242 // *** RECORDING OF TST DATA (COPY) ***
243 // *** NOT EXECUTED. ***
244 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
245 // *** ***
246 // *** START COMMAND FILE CG.SA.RCTST AGAIN. ***
247 // **********************************************
248 /
249 <REWIND MT:VSN=VSNNR2;
250 /

MMN:SW-COFIP-286 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

RCTST

251 <SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL;
252 <SKIPCMD:LABEL=END;
253 /
254 .OUT <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
255 /
256 // *******************************
257 // *** FINISHED WITHOUT FAULTS ***
258 // *******************************
259 // *******************************************
260 // *** REMOVE TST DATA RECORD TAPE (COPY). ***
261 // *** ***
262 // *** TST DATA RECORDING IS FINISHED. ***
263 // *******************************************
264 /
265 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
266 <SKIPCMD:LABEL=END;
267 /
268 .END <SETCFOPT:ACKCFS=ERROR,DANCMD=NOEXEC,ACKREQ=NEG,SCOPE=GLOBAL;
269 <ENDFILE;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-287
MMN:SW Maintenance
Software

RDAMA

1 <CMDFILE;
2 /
3 // 80-RDAMA-01
4 /
5 /****V01***************************************************************
6 /* *
7 /* COMMAND FILE CG.SA.RDAMA FOR RECORDING OF AMA DATA *
8 /* ================================================== *
9 /* *
10 /* TASK DESCRIPTION: *
11 /* ----------------- *
12 /* - RECORDING OF INDIVIDUAL CALL DATA *
13 /* *
14 /* HOLD MO READY/LOADING LOADMOD STATION: *
15 /* ---------------------------------- *
16 /* - A MOD (MAGNETO OPTICAL DISK) WITHOUT WRITE PROTECT *
17 /* IS TO BE HELD READY *
18 /* - BEFORE STARTING THE COMMAND FILE THE MOD STATION *
19 /* IS TO BE LOADED *
20 /* *
21 /* FAULT HANDLING: *
22 /* ----------------- *
23 /* - AFTER INTERRUPTION OF THE FILE PROCESSING VIA FAULT *
24 /* EXITS AND CORRESPONDING FAULT HANDLING THE FILE CAN *
25 /* BE STARTED AGAIN *
26 /* *
27 /* SWITCH PRESETTINGS FOR START POINTS AND ENTRY POINTS: *
28 /* ===================================================== *
29 /* START POINT SWITCH PRESETTINGS *
30 /* ----------- ------------------ *
31 /* RESETCFOPT; *
32 /* *
33 /* ENTRY POINT SWITCH PRESETTINGS *
34 /* ------------ ------------------ *
35 /* M1 SETCFOPT:OFF=1&&11,SCOPE=GLOBAL; *
36 /* M3 SETCFOPT:OFF=1&3&&11,ON=2,SCOPE=GLOBAL; *
37 /* M7 SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL; *
38 /* *
39 /* FAULT 01 SETCFOPT:OFF=1&&11,SCOPE=GLOBAL; *
40 /* FAULT 02,03 SETCFOPT:OFF=1&3&&11,ON=2,SCOPE=GLOBAL; *
41 /* FAULT 04,05 SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL; *
42 /* *
43 /**********************************************************************
44 /
45 <SETCFOPT:ACKCFS=ERROR,DANCMD=EXEC,ACKREQ=POS,SCOPE=GLOBAL;
46 /
47 <SKIPCMD:LABEL=END,ON=1;
48 <SKIPCMD:LABEL=M3,ON=2;
49 <SKIPCMD:LABEL=M7,ON=3;
50 /

MMN:SW-COFIP-288 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

RDAMA

51 .M1 <STEP;
52 // ***************************
53 // * DISK SAVING OF AMA DATA *
54 // ***************************
55 /
56 <TRANS BUFFER:TYPE=AMA;
57 <SKIPCMD:LABEL=AB1,ON=32;
58 /
59 .M2 <STEP;
60 // ***********************************
61 // * DISPLAYING AMA DATA FILE STATUS *
62 // ***********************************
63 /
64 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
65 <DISP FILE:FILE=IA.ICAMA,ALL;
66 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
67 /
68 .M3 <STEP;
69 // ******************************************
70 // * LABELING AMA DATA RECORD MO (ORIGINAL) *
71 // ******************************************
72 /
73 <INIT MO:VSN=VSNNR1,MOD=00,CD=ISO,DENS=6250;
74 <SKIPCMD:LABEL=AB2,ON=32;
75 /
76 .M4 <STEP;
77 // *****************************************
78 // * RECORDING AMA DATA (ORIGINAL) STARTED *
79 // *****************************************
80 /
81 <TRANS FILE:VSNR=VSNNR1,FILE=KDEDATA.EWSD/IA.ICAMA,COPMOD=POST;
82 <SKIPCMD:LABEL=AB3,ON=32;
83 /
84 <RSET MO:VSN=VSNNR1;
85 /
86 .M5 <STEP;
87 // ***************************************
88 // * RECORDING AMA DATA (ORIGINAL) ENDED *
89 // ***************************************
90 /
91 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
92 <DISP FILE:VSN=VSNNR1;
93 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
94 /
95 .M6 <STEP;
96 // *******************************************
97 // * REMOVE AMA DATA RECORD MO (ORIGINAL), *
98 // * MOUNT A MO WITHOUT WRITE PROTECTION *
99 // * FOR RECORDING AMA DATA (COPY). *
100 // * *

A30808-X3080-C485-5-7620 MMN:SW-COFIP-289
MMN:SW Maintenance
Software

RDAMA

101 // * START COMMAND FILE CG.SA.RDAMA AGAIN. *

102 // *******************************************
103 /
104 <SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL;
105 <SKIPCMD:LABEL=END;
106 /
107 .M7 <STEP;
108 // **************************************
109 // * LABELING AMA DATA RECORD MO (COPY) *
110 // **************************************
111 /
112 <INIT MO:VSN=VSNNR2,MOD=00,CD=ISO,DENS=6250;
113 <SKIPCMD:LABEL=AB4,ON=32;
114 /
115 .M8 <STEP;
116 // *************************************
117 // * RECORDING AMA DATA (COPY) STARTED *
118 // *************************************
119 /
120 <TRANS FILE:VSNR=VSNNR2,FILE=KDEDATA.EWSD/IA.ICAMA,COPMOD=POST;
121 <SKIPCMD:LABEL=AB5,ON=32;
122 /
123 <RSET MO:VSN=VSNNR2;
124 /
125 .M9 <STEP;
126 // ***********************************
127 // * RECORDING AMA DATA (COPY) ENDED *
128 // ***********************************
129 /
130 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
131 <DISP FILE:VSN=VSNNR2;
132 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
133 /
134 .MA <STEP;
135 // ************************************************
136 // * RELEASING RECORDED FILE AREA FOR OVERWRITING *
137 // ************************************************
138 /
139 <REL CYCFILE:FILE=IA.ICAMA;
140 /
141 .MB <STEP;
142 // ***********************************
143 // * DISPLAYING AMA DATA FILE STATUS *
144 // ***********************************
145 /
146 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
147 <DISP FILE:FILE=IA.ICAMA,ALL;
148 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
149 /
150 <SKIPCMD:LABEL=OUT;

MMN:SW-COFIP-290 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

RDAMA

151 / *******************************
152 / * FAULT EXITS AND END MESSAGE *
153 / *******************************
154 /
155 .AB1 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
156 <DISP FILE:FILE=IA.ICAMA,ALL;
157 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
158 // ****************
159 // *** FAULT 01 ***
160 // ****************
161 // **********************************************
162 // *** DISK SAVING OF AMA DATA NOT EXECUTED. ***
163 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
164 // *** ***
165 // *** START COMMAND FILE CG.SA.RDAMA AGAIN. ***
166 // **********************************************
167 /
168 <SETCFOPT:OFF=1&&11,SCOPE=GLOBAL;
169 <SKIPCMD:LABEL=END;
170 /
171 .AB2 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
172 // ****************
173 // *** FAULT 02 ***
174 // ****************
175 // **********************************************
176 // *** LABELING OF AMA DATA RECORD MO ***
177 // *** (ORIGINAL) NOT EXECUTED. ***
178 // *** MOD STATION OFFLINE OR DEFECTIVE OR ***
179 // *** MO DAMAGED: ***
180 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
181 // *** ***
182 // *** START COMMAND FILE CG.SA.RDAMA AGAIN. ***
183 // **********************************************
184 /
185 <SETCFOPT:OFF=1&3&&11,ON=2,SCOPE=GLOBAL;
186 <SKIPCMD:LABEL=END;
187 /
188 .AB3 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
189 // ****************
190 // *** FAULT 03 ***
191 // ****************
192 // **********************************************
193 // *** RECORDING OF AMA DATA (ORIGINAL) ***
194 // *** NOT EXECUTED. ***
195 // *** ***
196 // *** CASE 1: ***
197 // *** ======= ***
198 // *** MO DAMAGED OR FILE NOT AVAILABLE, ***
199 // *** CHECK PREREQUISITES, ELIMINATE FAULTS, ***
200 // *** ***

A30808-X3080-C485-5-7620 MMN:SW-COFIP-291
MMN:SW Maintenance
Software

RDAMA

201 // *** START COMMAND FILE CG.SA.RDAMA AGAIN. ***

202 // *** ***
203 // *** CASE 2: ***
204 // *** ======= ***
205 // *** CORRESPONDING BACKGROUND MEMORY FILE ***
206 // *** IS EMPTY, ***
207 // *** CHECK PREREQUISITES: ***
208 // *** COMMAND TRANS FILE WAS NOT EXECUTED, ***
209 // *** ERROR: L FC 33. ***
210 // *** ***
211 // *** RECORDING OF AMA DATA IMPOSSIBLE. ***
212 // *** ***
213 // *** PROCEDURE IS FINISHED. ***
214 // **********************************************
215 /
216 <RSET MO:VSN=VSNNR1;
217 /
218 <SETCFOPT:OFF=1&3&&11,ON=2,SCOPE=GLOBAL;
219 <SKIPCMD:LABEL=END;
220 /
221 .AB4 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
222 // ****************
223 // *** FAULT 04 ***
224 // ****************
225 // **********************************************
226 // *** LABELING OF AMA DATA RECORD MO ***
227 // *** (COPY) NOT EXECUTED. ***
228 // *** MOD STATION OFFLINE OR DEFECTIVE OR ***
229 // *** MO DAMAGED: ***
230 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
231 // *** ***
232 // *** START COMMAND FILE CG.SA.RDAMA AGAIN. ***
233 // **********************************************
234 /
235 <SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL;
236 <SKIPCMD:LABEL=END;
237 /
238 .AB5 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
239 // ****************
240 // *** FAULT 05 ***
241 // ****************
242 // **********************************************
243 // *** RECORDING OF AMA DATA (COPY) ***
244 // *** NOT EXECUTED. ***
245 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
246 // *** ***
247 // *** START COMMAND FILE CG.SA.RDAMA AGAIN. ***
248 // **********************************************
249 /
250 <RSET MO:VSN=VSNNR2;

MMN:SW-COFIP-292 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

RDAMA

251 /
252 <SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL;
253 <SKIPCMD:LABEL=END;
254 /
255 .OUT <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
256 /
257 // *******************************
258 // *** FINISHED WITHOUT FAULTS ***
259 // *******************************
260 // *******************************************
261 // *** REMOVE AMA DATA RECORD MO (COPY). ***
262 // *** ***
263 // *** AMA DATA RECORDING IS FINISHED. ***
264 // *******************************************
265 /
266 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
267 <SKIPCMD:LABEL=END;
268 /
269 .END <SETCFOPT:ACKCFS=ERROR,DANCMD=NOEXEC,ACKREQ=NEG,SCOPE=GLOBAL;
270 <ENDFILE;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-293
MMN:SW Maintenance
Software

RDDNB

1 <CMDFILE;
2 /
3 // 80-RDDNB-01
4 /
5 /****V01***************************************************************
6 /* *
7 /* COMMAND FILE CG.SA.RDDNB FOR RECORDING OF DNB DATA *
8 /* ================================================== *
9 /* *
10 /* TASK DESCRIPTION: *
11 /* ----------------- *
12 /* - RECORDING OF SUBSCRIBER OBSERVATION DATA *
13 /* *
14 /* HOLD MO READY/LOADING LOADMOD STATION: *
15 /* ---------------------------------- *
16 /* - A MOD (MAGNETO OPTICAL DISK) WITHOUT WRITE PROTECT *
17 /* IS TO BE HELD READY *
18 /* - BEFORE STARTING THE COMMAND FILE THE MOD STATION *
19 /* IS TO BE LOADED *
20 /* *
21 /* FAULT HANDLING: *
22 /* ----------------- *
23 /* - AFTER INTERRUPTION OF THE FILE PROCESSING VIA FAULT *
24 /* EXITS AND CORRESPONDING FAULT HANDLING THE FILE CAN *
25 /* BE STARTED AGAIN *
26 /* *
27 /* SWITCH PRESETTINGS FOR START POINTS AND ENTRY POINTS: *
28 /* ===================================================== *
29 /* START POINT SWITCH PRESETTINGS *
30 /* ----------- ------------------ *
31 /* RESETCFOPT; *
32 /* *
33 /* ENTRY POINT SWITCH PRESETTINGS *
34 /* ------------ ------------------ *
35 /* M1 SETCFOPT:OFF=1&&11,SCOPE=GLOBAL; *
36 /* M3 SETCFOPT:OFF=1&3&&11,ON=2,SCOPE=GLOBAL; *
37 /* M7 SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL; *
38 /* *
39 /* FAULT 01 SETCFOPT:OFF=1&&11,SCOPE=GLOBAL; *
40 /* FAULT 02,03 SETCFOPT:OFF=1&3&&11,ON=2,SCOPE=GLOBAL; *
41 /* FAULT 04,05 SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL; *
42 /* *
43 /**********************************************************************
44 /
45 <SETCFOPT:ACKCFS=ERROR,DANCMD=EXEC,ACKREQ=POS,SCOPE=GLOBAL;
46 /
47 <SKIPCMD:LABEL=END,ON=1;
48 <SKIPCMD:LABEL=M3,ON=2;
49 <SKIPCMD:LABEL=M7,ON=3;
50 /

MMN:SW-COFIP-294 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

RDDNB

51 .M1 <STEP;
52 // ***************************
53 // * DISK SAVING OF DNB DATA *
54 // ***************************
55 /
56 <TRANS BUFFER:TYPE=DNOB;
57 <SKIPCMD:LABEL=AB1,ON=32;
58 /
59 .M2 <STEP;
60 // ***********************************
61 // * DISPLAYING DNB DATA FILE STATUS *
62 // ***********************************
63 /
64 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
65 <DISP FILE:FILE=IA.ICDNB,ALL;
66 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
67 /
68 .M3 <STEP;
69 // ******************************************
70 // * LABELING DNB DATA RECORD MO (ORIGINAL) *
71 // ******************************************
72 /
73 <INIT MO:VSN=VSNNR1,MOD=00,CD=ISO,DENS=6250;
74 <SKIPCMD:LABEL=AB2,ON=32;
75 /
76 .M4 <STEP;
77 // *****************************************
78 // * RECORDING DNB DATA (ORIGINAL) STARTED *
79 // *****************************************
80 /
81 <TRANS FILE:VSNR=VSNNR1,FILE=KDEDATA.EWSD/IA.ICDNB,COPMOD=POST;
82 <SKIPCMD:LABEL=AB3,ON=32;
83 /
84 <RSET MO:VSN=VSNNR1;
85 /
86 .M5 <STEP;
87 // ***************************************
88 // * RECORDING DNB DATA (ORIGINAL) ENDED *
89 // ***************************************
90 /
91 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
92 <DISP FILE:VSN=VSNNR1;
93 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
94 /
95 .M6 <STEP;
96 // *******************************************
97 // * REMOVE DNB DATA RECORD MO (ORIGINAL), *
98 // * MOUNT A MO WITHOUT WRITE PROTRCTION *
99 // * FOR RECORDING DNB DATA (COPY). *
100 // * *

A30808-X3080-C485-5-7620 MMN:SW-COFIP-295
MMN:SW Maintenance
Software

RDDNB

101 // * START COMMAND FILE CG.SA.RDDNB AGAIN. *

102 // *******************************************
103 /
104 <SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL;
105 <SKIPCMD:LABEL=END;
106 /
107 .M7 <STEP;
108 // **************************************
109 // * LABELING DNB DATA RECORD MO (COPY) *
110 // **************************************
111 /
112 <INIT MO:VSN=VSNNR2,MOD=00,CD=ISO,DENS=6250;
113 <SKIPCMD:LABEL=AB4,ON=32;
114 /
115 .M8 <STEP;
116 // *************************************
117 // * RECORDING DNB DATA (COPY) STARTED *
118 // *************************************
119 /
120 <TRANS FILE:VSNR=VSNNR2,FILE=KDEDATA.EWSD/IA.ICDNB,COPMOD=POST;
121 <SKIPCMD:LABEL=AB5,ON=32;
122 /
123 <RSET MO:VSN=VSNNR2;
124 /
125 .M9 <STEP;
126 // ***********************************
127 // * RECORDING DNB DATA (COPY) ENDED *
128 // ***********************************
129 /
130 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
131 <DISP FILE:VSN=VSNNR2;
132 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
133 /
134 .MA <STEP;
135 // ************************************************
136 // * RELEASING RECORDED FILE AREA FOR OVERWRITING *
137 // ************************************************
138 /
139 <REL CYCFILE:FILE=IA.ICDNB;
140 /
141 .MB <STEP;
142 // ***********************************
143 // * DISPLAYING DNB DATA FILE STATUS *
144 // ***********************************
145 /
146 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
147 <DISP FILE:FILE=IA.ICDNB,ALL;
148 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
149 /
150 <SKIPCMD:LABEL=OUT;

MMN:SW-COFIP-296 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

RDDNB

151 / *******************************
152 / * FAULT EXITS AND END MESSAGE *
153 / *******************************
154 /
155 .AB1 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
156 <DISP FILE:FILE=IA.ICDNB,ALL;
157 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
158 // ****************
159 // *** FAULT 01 ***
160 // ****************
161 // **********************************************
162 // *** DISK SAVING OF DNB DATA NOT EXECUTED. ***
163 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
164 // *** ***
165 // *** START COMMAND FILE CG.SA.RDDNB AGAIN. ***
166 // **********************************************
167 /
168 <SETCFOPT:OFF=1&&11,SCOPE=GLOBAL;
169 <SKIPCMD:LABEL=END;
170 /
171 .AB2 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
172 // ****************
173 // *** FAULT 02 ***
174 // ****************
175 // **********************************************
176 // *** LABELING OF DNB DATA RECORD MO ***
177 // *** (ORIGINAL) NOT EXECUTED. ***
178 // *** MOD STATION OFFLINE OR DEFECTIVE OR ***
179 // *** MO DAMAGED: ***
180 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
181 // *** ***
182 // *** START COMMAND FILE CG.SA.RDDNB AGAIN. ***
183 // **********************************************
184 /
185 <SETCFOPT:OFF=1&3&&11,ON=2,SCOPE=GLOBAL;
186 <SKIPCMD:LABEL=END;
187 /
188 .AB3 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
189 // ****************
190 // *** FAULT 03 ***
191 // ****************
192 // **********************************************
193 // *** RECORDING OF DNB DATA (ORIGINAL) ***
194 // *** NOT EXECUTED. ***
195 // *** ***
196 // *** CASE 1: ***
197 // *** ======= ***
198 // *** MO DAMAGED OR FILE NOT AVAILABLE, ***
199 // *** CHECK PREREQUISITES, ELIMINATE FAULTS, ***
200 // *** ***

A30808-X3080-C485-5-7620 MMN:SW-COFIP-297
MMN:SW Maintenance
Software

RDDNB

201 // *** START COMMAND FILE CG.SA.RDDNB AGAIN. ***

202 // *** ***
203 // *** CASE 2: ***
204 // *** ======= ***
205 // *** CORRESPONDING BACKGROUND MEMORY FILE ***
206 // *** IS EMPTY, ***
207 // *** CHECK PREREQUISITES: ***
208 // *** COMMAND TRANS FILE WAS NOT EXECUTED, ***
209 // *** ERROR: L FC 33. ***
210 // *** ***
211 // *** RECORDING OF DNB DATA IMPOSSIBLE. ***
212 // *** ***
213 // *** PROCEDURE IS FINISHED. ***
214 // **********************************************
215 /
216 <RSET MO:VSN=VSNNR1;
217 /
218 <SETCFOPT:OFF=1&3&&11,ON=2,SCOPE=GLOBAL;
219 <SKIPCMD:LABEL=END;
220 /
221 .AB4 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
222 // ****************
223 // *** FAULT 04 ***
224 // ****************
225 // **********************************************
226 // *** LABELING OF DNB DATA RECORD MO ***
227 // *** (COPY) NOT EXECUTED. ***
228 // *** MOD STATION OFFLINE OR DEFECTIVE OR ***
229 // *** MO DAMAGED: ***
230 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
231 // *** ***
232 // *** START COMMAND FILE CG.SA.RDDNB AGAIN. ***
233 // **********************************************
234 /
235 <SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL;
236 <SKIPCMD:LABEL=END;
237 /
238 .AB5 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
239 // ****************
240 // *** FAULT 05 ***
241 // ****************
242 // **********************************************
243 // *** RECORDING OF DNB DATA (COPY) ***
244 // *** NOT EXECUTED. ***
245 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
246 // *** ***
247 // *** START COMMAND FILE CG.SA.RDDNB AGAIN. ***
248 // **********************************************
249 /
250 <RSET MO:VSN=VSNNR2;

MMN:SW-COFIP-298 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

RDDNB

251 /
252 <SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL;
253 <SKIPCMD:LABEL=END;
254 /
255 .OUT <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
256 /
257 // *******************************
258 // *** FINISHED WITHOUT FAULTS ***
259 // *******************************
260 // *******************************************
261 // *** REMOVE DNB DATA RECORD MO (COPY). ***
262 // *** ***
263 // *** DNB DATA RECORDING IS FINISHED. ***
264 // *******************************************
265 /
266 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
267 <SKIPCMD:LABEL=END;
268 /
269 .END <SETCFOPT:ACKCFS=ERROR,DANCMD=NOEXEC,ACKREQ=NEG,SCOPE=GLOBAL;
270 <ENDFILE;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-299
MMN:SW Maintenance
Software

RDERS

1 <CMDFILE;
2 /
3 // 80-RDERS-01
4 /
5 /****V01***************************************************************
6 /* *
7 /* COMMAND FILE CG.SA.RDERS FOR RECORDING OF ERS DATA *
8 /* ================================================== *
9 /* *
10 /* TASK DESCRIPTION: *
11 /* ----------------- *
12 /* - RECORDING OF INDIVIDUAL CALL DATA *
13 /* *
14 /* HOLD MO READY/LOADING LOADMOD STATION: *
15 /* ---------------------------------- *
16 /* - A MOD (MAGNETO OPTICAL DISK) WITHOUT WRITE PROTECT *
17 /* IS TO BE HELD READY *
18 /* - BEFORE STARTING THE COMMAND FILE THE MOD STATION *
19 /* IS TO BE LOADED *
20 /* *
21 /* FAULT HANDLING: *
22 /* ----------------- *
23 /* - AFTER INTERRUPTION OF THE FILE PROCESSING VIA FAULT *
24 /* EXITS AND CORRESPONDING FAULT HANDLING THE FILE CAN *
25 /* BE STARTED AGAIN *
26 /* *
27 /* SWITCH PRESETTINGS FOR START POINTS AND ENTRY POINTS: *
28 /* ===================================================== *
29 /* START POINT SWITCH PRESETTINGS *
30 /* ----------- ------------------ *
31 /* RESETCFOPT; *
32 /* *
33 /* ENTRY POINT SWITCH PRESETTINGS *
34 /* ------------ ------------------ *
35 /* M1 SETCFOPT:OFF=1&&11,SCOPE=GLOBAL; *
36 /* M3 SETCFOPT:OFF=1&3&&11,ON=2,SCOPE=GLOBAL; *
37 /* M7 SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL; *
38 /* *
39 /* FAULT 01 SETCFOPT:OFF=1&&11,SCOPE=GLOBAL; *
40 /* FAULT 02,03 SETCFOPT:OFF=1&3&&11,ON=2,SCOPE=GLOBAL; *
41 /* FAULT 04,05 SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL; *
42 /* *
43 /**********************************************************************
44 /
45 <SETCFOPT:ACKCFS=ERROR,DANCMD=EXEC,ACKREQ=POS,SCOPE=GLOBAL;
46 /
47 <SKIPCMD:LABEL=END,ON=1;
48 <SKIPCMD:LABEL=M3,ON=2;
49 <SKIPCMD:LABEL=M7,ON=3;
50 /

MMN:SW-COFIP-300 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

RDERS

51 .M1 <STEP;
52 // ***************************
53 // * DISK SAVING OF ERS DATA *
54 // ***************************
55 /
56 <TRANS BUFFER:TYPE=ERS;
57 <SKIPCMD:LABEL=AB1,ON=32;
58 /
59 .M2 <STEP;
60 // ***********************************
61 // * DISPLAYING ERS DATA FILE STATUS *
62 // ***********************************
63 /
64 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
65 <DISP FILE:FILE=IA.ERST,ALL;
66 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
67 /
68 .M3 <STEP;
69 // ******************************************
70 // * LABELING ERS DATA RECORD MO (ORIGINAL) *
71 // ******************************************
72 /
73 <INIT MO:VSN=VSNNR1,MOD=00,CD=ISO,DENS=6250;
74 <SKIPCMD:LABEL=AB2,ON=32;
75 /
76 .M4 <STEP;
77 // *****************************************
78 // * RECORDING ERS DATA (ORIGINAL) STARTED *
79 // *****************************************
80 /
81 <TRANS FILE:VSNR=VSNNR1,FILE=KDEDATA.EWSD/IA.ERST,COPMOD=POST;
82 <SKIPCMD:LABEL=AB3,ON=32;
83 /
84 <RSET MO:VSN=VSNNR1;
85 /
86 .M5 <STEP;
87 // ***************************************
88 // * RECORDING ERS DATA (ORIGINAL) ENDED *
89 // ***************************************
90 /
91 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
92 <DISP FILE:VSN=VSNNR1;
93 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
94 /
95 .M6 <STEP;
96 // *******************************************
97 // * REMOVE ERS DATA RECORD MO (ORIGINAL), *
98 // * MOUNT A MO WITHOUT WRITE PROTRCTION *
99 // * FOR RECORDING ERS DATA (COPY). *
100 // * *

A30808-X3080-C485-5-7620 MMN:SW-COFIP-301
MMN:SW Maintenance
Software

RDERS

101 // * START COMMAND FILE CG.SA.RDERS AGAIN. *

102 // *******************************************
103 /
104 <SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL;
105 <SKIPCMD:LABEL=END;
106 /
107 .M7 <STEP;
108 // ****************************************
109 // * LABELING ERS DATA RECORD MO (COPY) *
110 // ****************************************
111 /
112 <INIT MO:VSN=VSNNR2,MOD=00,CD=ISO,DENS=6250;
113 <SKIPCMD:LABEL=AB4,ON=32;
114 /
115 .M8 <STEP;
116 // *************************************
117 // * RECORDING ERS DATA (COPY) STARTED *
118 // *************************************
119 /
120 <TRANS FILE:VSNR=VSNNR2,FILE=KDEDATA.EWSD/IA.ERST,COPMOD=POST;
121 <SKIPCMD:LABEL=AB5,ON=32;
122 /
123 <RSET MO:VSN=VSNNR2;
124 /
125 .M9 <STEP;
126 // ***********************************
127 // * RECORDING ERS DATA (COPY) ENDED *
128 // ***********************************
129 /
130 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
131 <DISP FILE:VSN=VSNNR2;
132 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
133 /
134 .MA <STEP;
135 // ************************************************
136 // * RELEASING RECORDED FILE AREA FOR OVERWRITING *
137 // ************************************************
138 /
139 <REL CYCFILE:FILE=IA.ERST;
140 /
141 .MB <STEP;
142 // ***********************************
143 // * DISPLAYING ERS DATA FILE STATUS *
144 // ***********************************
145 /
146 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
147 <DISP FILE:FILE=IA.ERST,ALL;
148 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
149 /
150 <SKIPCMD:LABEL=OUT;

MMN:SW-COFIP-302 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

RDERS

151 / *******************************
152 / * FAULT EXITS AND END MESSAGE *
153 / *******************************
154 /
155 .AB1 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
156 <DISP FILE:FILE=IA.ERST,ALL;
157 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
158 // ****************
159 // *** FAULT 01 ***
160 // ****************
161 // **********************************************
162 // *** DISK SAVING OF ERS DATA NOT EXECUTED. ***
163 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
164 // *** ***
165 // *** START COMMAND FILE CG.SA.RDERS AGAIN. ***
166 // **********************************************
167 /
168 <SETCFOPT:OFF=1&&11,SCOPE=GLOBAL;
169 <SKIPCMD:LABEL=END;
170 /
171 .AB2 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
172 // ****************
173 // *** FAULT 02 ***
174 // ****************
175 // **********************************************
176 // *** LABELING OF ERS DATA RECORD MO ***
177 // *** (ORIGINAL) NOT EXECUTED. ***
178 // *** MOD STATION OFFLINE OR DEFECTIVE OR ***
179 // *** MO DAMAGED: ***
180 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
181 // *** ***
182 // *** START COMMAND FILE CG.SA.RDERS AGAIN. ***
183 // **********************************************
184 /
185 <SETCFOPT:OFF=1&3&&11,ON=2,SCOPE=GLOBAL;
186 <SKIPCMD:LABEL=END;
187 /
188 .AB3 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
189 // ****************
190 // *** FAULT 03 ***
191 // ****************
192 // **********************************************
193 // *** RECORDING OF ERS DATA (ORIGINAL) ***
194 // *** NOT EXECUTED. ***
195 // *** ***
196 // *** CASE 1: ***
197 // *** ======= ***
198 // *** MO DAMAGED OR FILE NOT AVAILABLE, ***
199 // *** CHECK PREREQUISITES, ELIMINATE FAULTS, ***
200 // *** ***

A30808-X3080-C485-5-7620 MMN:SW-COFIP-303
MMN:SW Maintenance
Software

RDERS

201 // *** START COMMAND FILE CG.SA.RDERS AGAIN. ***

202 // *** ***
203 // *** CASE 2: ***
204 // *** ======= ***
205 // *** CORRESPONDING BACKGROUND MEMORY FILE ***
206 // *** IS EMPTY, ***
207 // *** CHECK PREREQUISITES: ***
208 // *** COMMAND TRANS FILE WAS NOT EXECUTED, ***
209 // *** ERROR: L FC 33. ***
210 // *** ***
211 // *** RECORDING OF ERS DATA IMPOSSIBLE. ***
212 // *** ***
213 // *** PROCEDURE IS FINISHED. ***
214 // **********************************************
215 /
216 <RSET MO:VSN=VSNNR1;
217 /
218 <SETCFOPT:OFF=1&3&&11,ON=2,SCOPE=GLOBAL;
219 <SKIPCMD:LABEL=END;
220 /
221 .AB4 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
222 // ****************
223 // *** FAULT 04 ***
224 // ****************
225 // **********************************************
226 // *** LABELING OF ERS DATA RECORD MO ***
227 // *** (COPY) NOT EXECUTED. ***
228 // *** MOD STATION OFFLINE OR DEFECTIVE OR ***
229 // *** MO DAMAGED: ***
230 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
231 // *** ***
232 // *** START COMMAND FILE CG.SA.RDERS AGAIN. ***
233 // **********************************************
234 /
235 <SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL;
236 <SKIPCMD:LABEL=END;
237 /
238 .AB5 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
239 // ****************
240 // *** FAULT 05 ***
241 // ****************
242 // **********************************************
243 // *** RECORDING OF ERS DATA (COPY) ***
244 // *** NOT EXECUTED. ***
245 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
246 // *** ***
247 // *** START COMMAND FILE CG.SA.RDERS AGAIN. ***
248 // **********************************************
249 /
250 <RSET MO:VSN=VSNNR2;

MMN:SW-COFIP-304 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

RDERS

251 /
252 <SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL;
253 <SKIPCMD:LABEL=END;
254 /
255 .OUT <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
256 /
257 // *******************************
258 // *** FINISHED WITHOUT FAULTS ***
259 // *******************************
260 // *******************************************
261 // *** REMOVE ERS DATA RECORD MO (COPY). ***
262 // *** ***
263 // *** ERS DATA RECORDING IS FINISHED. ***
264 // *******************************************
265 /
266 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
267 <SKIPCMD:LABEL=END;
268 /
269 .END <SETCFOPT:ACKCFS=ERROR,DANCMD=NOEXEC,ACKREQ=NEG,SCOPE=GLOBAL;
270 <ENDFILE;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-305
MMN:SW Maintenance
Software

RDFIR

1 <CMDFILE;
2 /
3 // 80-RDFIR-01
4 /
5 /****V01***************************************************************
6 /* *
7 /* COMMAND FILE CG.SA.RDFIR FOR RECORDING OF FIR DATA *
8 /* ================================================== *
9 /* *
10 /* TASK DESCRIPTION: *
11 /* ----------------- *
12 /* - RECORDING OF INDIVIDUAL CALL DATA *
13 /* *
14 /* HOLD MO READY/LOADING LOADMOD STATION: *
15 /* ---------------------------------- *
16 /* - A MOD (MAGNETO OPTICAL DISK) WITHOUT WRITE PROTECT *
17 /* IS TO BE HELD READY *
18 /* - BEFORE STARTING THE COMMAND FILE THE MOD STATION *
19 /* IS TO BE LOADED *
20 /* *
21 /* FAULT HANDLING: *
22 /* ----------------- *
23 /* - AFTER INTERRUPTION OF THE FILE PROCESSING VIA FAULT *
24 /* EXITS AND CORRESPONDING FAULT HANDLING THE FILE CAN *
25 /* BE STARTED AGAIN *
26 /* *
27 /* SWITCH PRESETTINGS FOR START POINTS AND ENTRY POINTS: *
28 /* ===================================================== *
29 /* START POINT SWITCH PRESETTINGS *
30 /* ----------- ------------------ *
31 /* RESETCFOPT; *
32 /* *
33 /* ENTRY POINT SWITCH PRESETTINGS *
34 /* ------------ ------------------ *
35 /* M1 SETCFOPT:OFF=1&&11,SCOPE=GLOBAL; *
36 /* M3 SETCFOPT:OFF=1&3&&11,ON=2,SCOPE=GLOBAL; *
37 /* M7 SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL; *
38 /* *
39 /* FAULT 01 SETCFOPT:OFF=1&&11,SCOPE=GLOBAL; *
40 /* FAULT 02,03 SETCFOPT:OFF=1&3&&11,ON=2,SCOPE=GLOBAL; *
41 /* FAULT 04,05 SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL; *
42 /* *
43 /**********************************************************************
44 /
45 <SETCFOPT:ACKCFS=ERROR,DANCMD=EXEC,ACKREQ=POS,SCOPE=GLOBAL;
46 /
47 <SKIPCMD:LABEL=END,ON=1;
48 <SKIPCMD:LABEL=M3,ON=2;
49 <SKIPCMD:LABEL=M7,ON=3;
50 /

MMN:SW-COFIP-306 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

RDFIR

51 .M1 <STEP;
52 // ***************************
53 // * DISK SAVING OF FIR DATA *
54 // ***************************
55 /
56 <TRANS BUFFER:TYPE=FIR;
57 <SKIPCMD:LABEL=AB1,ON=32;
58 /
59 .M2 <STEP;
60 // ***********************************
61 // * DISPLAYING FIR DATA FILE STATUS *
62 // ***********************************
63 /
64 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
65 <DISP FILE:FILE=IA.ICFIR,ALL;
66 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
67 /
68 .M3 <STEP;
69 // ********************************************
70 // * LABELING FIR DATA RECORD MO (ORIGINAL) *
71 // ********************************************
72 /
73 <INIT MO:VSN=VSNNR1,MOD=00,CD=ISO,DENS=6250;
74 <SKIPCMD:LABEL=AB2,ON=32;
75 /
76 .M4 <STEP;
77 // *****************************************
78 // * RECORDING FIR DATA (ORIGINAL) STARTED *
79 // *****************************************
80 /
81 <TRANS FILE:VSNR=VSNNR1,FILE=KDEDATA.EWSD/IA.ICFIR,COPMOD=POST;
82 <SKIPCMD:LABEL=AB3,ON=32;
83 /
84 <RSET MO:VSN=VSNNR1;
85 /
86 .M5 <STEP;
87 // ***************************************
88 // * RECORDING FIR DATA (ORIGINAL) ENDED *
89 // ***************************************
90 /
91 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
92 <DISP FILE:VSN=VSNNR1;
93 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
94 /
95 .M6 <STEP;
96 // *******************************************
97 // * REMOVE FIR DATA RECORD MO (ORIGINAL), *
98 // * MOUNT A MO WITHOUT WRITE PROTRCTION *
99 // * FOR RECORDING FIR DATA (COPY). *
100 // * *

A30808-X3080-C485-5-7620 MMN:SW-COFIP-307
MMN:SW Maintenance
Software

RDFIR

101 // * START COMMAND FILE CG.SA.RDFIR AGAIN. *

102 // *******************************************
103 /
104 <SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL;
105 <SKIPCMD:LABEL=END;
106 /
107 .M7 <STEP;
108 // ****************************************
109 // * LABELING FIR DATA RECORD MO (COPY) *
110 // ****************************************
111 /
112 <INIT MO:VSN=VSNNR2,MOD=00,CD=ISO,DENS=6250;
113 <SKIPCMD:LABEL=AB4,ON=32;
114 /
115 .M8 <STEP;
116 // *************************************
117 // * RECORDING FIR DATA (COPY) STARTED *
118 // *************************************
119 /
120 <TRANS FILE:VSNR=VSNNR2,FILE=KDEDATA.EWSD/IA.ICFIR,COPMOD=POST;
121 <SKIPCMD:LABEL=AB5,ON=32;
122 /
123 <RSET MO:VSN=VSNNR2;
124 /
125 .M9 <STEP;
126 // ***********************************
127 // * RECORDING FIR DATA (COPY) ENDED *
128 // ***********************************
129 /
130 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
131 <DISP FILE:VSN=VSNNR2;
132 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
133 /
134 .MA <STEP;
135 // ************************************************
136 // * RELEASING RECORDED FILE AREA FOR OVERWRITING *
137 // ************************************************
138 /
139 <REL CYCFILE:FILE=IA.ICFIR;
140 /
141 .MB <STEP;
142 // ***********************************
143 // * DISPLAYING FIR DATA FILE STATUS *
144 // ***********************************
145 /
146 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
147 <DISP FILE:FILE=IA.ICFIR,ALL;
148 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
149 /
150 <SKIPCMD:LABEL=OUT;

MMN:SW-COFIP-308 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

RDFIR

151 / *******************************
152 / * FAULT EXITS AND END MESSAGE *
153 / *******************************
154 /
155 .AB1 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
156 <DISP FILE:FILE=IA.ICFIR,ALL;
157 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
158 // ****************
159 // *** FAULT 01 ***
160 // ****************
161 // **********************************************
162 // *** DISK SAVING OF FIR DATA NOT EXECUTED. ***
163 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
164 // *** ***
165 // *** START COMMAND FILE CG.SA.RDFIR AGAIN. ***
166 // **********************************************
167 /
168 <SETCFOPT:OFF=1&&11,SCOPE=GLOBAL;
169 <SKIPCMD:LABEL=END;
170 /
171 .AB2 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
172 // ****************
173 // *** FAULT 02 ***
174 // ****************
175 // **********************************************
176 // *** LABELING OF FIR DATA RECORD MO ***
177 // *** (ORIGINAL) NOT EXECUTED. ***
178 // *** MOD STATION OFFLINE OR DEFECTIVE OR ***
179 // *** MO DAMAGED: ***
180 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
181 // *** ***
182 // *** START COMMAND FILE CG.SA.RDFIR AGAIN. ***
183 // **********************************************
184 /
185 <SETCFOPT:OFF=1&3&&11,ON=2,SCOPE=GLOBAL;
186 <SKIPCMD:LABEL=END;
187 /
188 .AB3 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
189 // ****************
190 // *** FAULT 03 ***
191 // ****************
192 // **********************************************
193 // *** RECORDING OF FIR DATA (ORIGINAL) ***
194 // *** NOT EXECUTED. ***
195 // *** ***
196 // *** CASE 1: ***
197 // *** ======= ***
198 // *** MO DAMAGED OR FILE NOT AVAILABLE, ***
199 // *** CHECK PREREQUISITES, ELIMINATE FAULTS, ***
200 // *** ***

A30808-X3080-C485-5-7620 MMN:SW-COFIP-309
MMN:SW Maintenance
Software

RDFIR

201 // *** START COMMAND FILE CG.SA.RDFIR AGAIN. ***

202 // *** ***
203 // *** CASE 2: ***
204 // *** ======= ***
205 // *** CORRESPONDING BACKGROUND MEMORY FILE ***
206 // *** IS EMPTY, ***
207 // *** CHECK PREREQUISITES: ***
208 // *** COMMAND TRANS FILE WAS NOT EXECUTED, ***
209 // *** ERROR: L FC 33. ***
210 // *** ***
211 // *** RECORDING OF FIR DATA IMPOSSIBLE. ***
212 // *** ***
213 // *** PROCEDURE IS FINISHED. ***
214 // **********************************************
215 /
216 <RSET MO:VSN=VSNNR1;
217 /
218 <SETCFOPT:OFF=1&3&&11,ON=2,SCOPE=GLOBAL;
219 <SKIPCMD:LABEL=END;
220 /
221 .AB4 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
222 // ****************
223 // *** FAULT 04 ***
224 // ****************
225 // **********************************************
226 // *** LABELING OF FIR DATA RECORD MO ***
227 // *** (COPY) NOT EXECUTED. ***
228 // *** MOD STATION OFFLINE OR DEFECTIVE OR ***
229 // *** MO DAMAGED: ***
230 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
231 // *** ***
232 // *** START COMMAND FILE CG.SA.RDFIR AGAIN. ***
233 // **********************************************
234 /
235 <SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL;
236 <SKIPCMD:LABEL=END;
237 /
238 .AB5 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
239 // ****************
240 // *** FAULT 05 ***
241 // ****************
242 // **********************************************
243 // *** RECORDING OF FIR DATA (COPY) ***
244 // *** NOT EXECUTED. ***
245 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
246 // *** ***
247 // *** START COMMAND FILE CG.SA.RDFIR AGAIN. ***
248 // **********************************************
249 /
250 <RSET MO:VSN=VSNNR2;

MMN:SW-COFIP-310 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

RDFIR

251 /
252 <SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL;
253 <SKIPCMD:LABEL=END;
254 /
255 .OUT <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
256 /
257 // *******************************
258 // *** FINISHED WITHOUT FAULTS ***
259 // *******************************
260 // *******************************************
261 // *** REMOVE FIR DATA RECORD MO (COPY). ***
262 // *** ***
263 // *** FIR DATA RECORDING IS FINISHED. ***
264 // *******************************************
265 /
266 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
267 <SKIPCMD:LABEL=END;
268 /
269 .END <SETCFOPT:ACKCFS=ERROR,DANCMD=NOEXEC,ACKREQ=NEG,SCOPE=GLOBAL;
270 <ENDFILE;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-311
MMN:SW Maintenance
Software

RDIAR

1 <CMDFILE;
2 /
3 // 80-RDIAR-01
4 /
5 /****V01***************************************************************
6 /* *
7 /* COMMAND FILE CG.SA.RDIAR FOR RECORDING OF IAR DATA *
8 /* ================================================== *
9 /* *
10 /* TASK DESCRIPTION: *
11 /* ----------------- *
12 /* - RECORDING OF INDIVIDUAL CALL DATA *
13 /* *
14 /* HOLD MO READY/LOADING LOADMOD STATION: *
15 /* ---------------------------------- *
16 /* - A MOD (MAGNETO OPTICAL DISK) WITHOUT WRITE PROTECT *
17 /* IS TO BE HELD READY *
18 /* - BEFORE STARTING THE COMMAND FILE THE MOD STATION *
19 /* IS TO BE LOADED *
20 /* *
21 /* FAULT HANDLING: *
22 /* ----------------- *
23 /* - AFTER INTERRUPTION OF THE FILE PROCESSING VIA FAULT *
24 /* EXITS AND CORRESPONDING FAULT HANDLING THE FILE CAN *
25 /* BE STARTED AGAIN *
26 /* *
27 /* SWITCH PRESETTINGS FOR START POINTS AND ENTRY POINTS: *
28 /* ===================================================== *
29 /* START POINT SWITCH PRESETTINGS *
30 /* ----------- ------------------ *
31 /* RESETCFOPT; *
32 /* *
33 /* ENTRY POINT SWITCH PRESETTINGS *
34 /* ------------ ------------------ *
35 /* M1 SETCFOPT:OFF=1&&11,SCOPE=GLOBAL; *
36 /* M3 SETCFOPT:OFF=1&3&&11,ON=2,SCOPE=GLOBAL; *
37 /* M7 SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL; *
38 /* *
39 /* FAULT 01 SETCFOPT:OFF=1&&11,SCOPE=GLOBAL; *
40 /* FAULT 02,03 SETCFOPT:OFF=1&3&&11,ON=2,SCOPE=GLOBAL; *
41 /* FAULT 04,05 SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL; *
42 /* *
43 /**********************************************************************
44 /
45 <SETCFOPT:ACKCFS=ERROR,DANCMD=EXEC,ACKREQ=POS,SCOPE=GLOBAL;
46 /
47 <SKIPCMD:LABEL=END,ON=1;
48 <SKIPCMD:LABEL=M3,ON=2;
49 <SKIPCMD:LABEL=M7,ON=3;
50 /

MMN:SW-COFIP-312 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

RDIAR

51 .M1 <STEP;
52 // ***************************
53 // * DISK SAVING OF IAR DATA *
54 // ***************************
55 /
56 <TRANS BUFFER:TYPE=IARA;
57 <SKIPCMD:LABEL=AB1,ON=32;
58 /
59 .M2 <STEP;
60 // ***********************************
61 // * DISPLAYING IAR DATA FILE STATUS *
62 // ***********************************
63 /
64 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
65 <DISP FILE:FILE=IA.ICIAR,ALL;
66 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
67 /
68 .M3 <STEP;
69 // ********************************************
70 // * LABELING IAR DATA RECORD MO (ORIGINAL) *
71 // ********************************************
72 /
73 <INIT MO:VSN=VSNNR1,MOD=00,CD=EBC,DENS=6250;
74 <SKIPCMD:LABEL=AB2,ON=32;
75 /
76 .M4 <STEP;
77 // *****************************************
78 // * RECORDING IAR DATA (ORIGINAL) STARTED *
79 // *****************************************
80 /
81 <TRANS FILE:VSNR=VSNNR1,FILE=REGDATA.EWSD/IA.ICIAR,COPMOD=POST;
82 <SKIPCMD:LABEL=AB3,ON=32;
83 /
84 <RSET MO:VSN=VSNNR1;
85 /
86 .M5 <STEP;
87 // ***************************************
88 // * RECORDING IAR DATA (ORIGINAL) ENDED *
89 // ***************************************
90 /
91 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
92 <DISP FILE:VSN=VSNNR1;
93 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
94 /
95 .M6 <STEP;
96 // *******************************************
97 // * REMOVE IAR DATA RECORD MO (ORIGINAL), *
98 // * MOUNT A MO WITHOUT WRITE PROTRCTION *
99 // * FOR RECORDING IAR DATA (COPY). *
100 // * *

A30808-X3080-C485-5-7620 MMN:SW-COFIP-313
MMN:SW Maintenance
Software

RDIAR

101 // * START COMMAND FILE CG.SA.RDIAR AGAIN. *

102 // *******************************************
103 /
104 <SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL;
105 <SKIPCMD:LABEL=END;
106 /
107 .M7 <STEP;
108 // ****************************************
109 // * LABELING IAR DATA RECORD MO (COPY) *
110 // ****************************************
111 /
112 <INIT MO:VSN=VSNNR2,MOD=00,CD=EBC,DENS=6250;
113 <SKIPCMD:LABEL=AB4,ON=32;
114 /
115 .M8 <STEP;
116 // *************************************
117 // * RECORDING IAR DATA (COPY) STARTED *
118 // *************************************
119 /
120 <TRANS FILE:VSNR=VSNNR2,FILE=REGDATA.EWSD/IA.ICIAR,COPMOD=POST;
121 <SKIPCMD:LABEL=AB5,ON=32;
122 /
123 <RSET MO:VSN=VSNNR2;
124 /
125 .M9 <STEP;
126 // ***********************************
127 // * RECORDING IAR DATA (COPY) ENDED *
128 // ***********************************
129 /
130 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
131 <DISP FILE:VSN=VSNNR2;
132 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
133 /
134 .MA <STEP;
135 // ************************************************
136 // * RELEASING RECORDED FILE AREA FOR OVERWRITING *
137 // ************************************************
138 /
139 <REL CYCFILE:FILE=IA.ICIAR;
140 /
141 .MB <STEP;
142 // ***********************************
143 // * DISPLAYING IAR DATA FILE STATUS *
144 // ***********************************
145 /
146 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
147 <DISP FILE:FILE=IA.ICIAR,ALL;
148 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
149 /
150 <SKIPCMD:LABEL=OUT;

MMN:SW-COFIP-314 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

RDIAR

151 / *******************************
152 / * FAULT EXITS AND END MESSAGE *
153 / *******************************
154 /
155 .AB1 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
156 <DISP FILE:FILE=IA.ICIAR,ALL;
157 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
158 // ****************
159 // *** FAULT 01 ***
160 // ****************
161 // **********************************************
162 // *** DISK SAVING OF IAR DATA NOT EXECUTED. ***
163 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
164 // *** ***
165 // *** START COMMAND FILE CG.SA.RDIAR AGAIN. ***
166 // **********************************************
167 /
168 <SETCFOPT:OFF=1&&11,SCOPE=GLOBAL;
169 <SKIPCMD:LABEL=END;
170 /
171 .AB2 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
172 // ****************
173 // *** FAULT 02 ***
174 // ****************
175 // **********************************************
176 // *** LABELING OF IAR DATA RECORD MO ***
177 // *** (ORIGINAL) NOT EXECUTED. ***
178 // *** MOD STATION OFFLINE OR DEFECTIVE OR ***
179 // *** MO DAMAGED: ***
180 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
181 // *** ***
182 // *** START COMMAND FILE CG.SA.RDIAR AGAIN. ***
183 // **********************************************
184 /
185 <SETCFOPT:OFF=1&3&&11,ON=2,SCOPE=GLOBAL;
186 <SKIPCMD:LABEL=END;
187 /
188 .AB3 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
189 // ****************
190 // *** FAULT 03 ***
191 // ****************
192 // **********************************************
193 // *** RECORDING OF IAR DATA (ORIGINAL) ***
194 // *** NOT EXECUTED. ***
195 // *** ***
196 // *** CASE 1: ***
197 // *** ======= ***
198 // *** MO DAMAGED OR FILE NOT AVAILABLE, ***
199 // *** CHECK PREREQUISITES, ELIMINATE FAULTS, ***
200 // *** ***

A30808-X3080-C485-5-7620 MMN:SW-COFIP-315
MMN:SW Maintenance
Software

RDIAR

201 // *** START COMMAND FILE CG.SA.RDIAR AGAIN. ***

202 // *** ***
203 // *** CASE 2: ***
204 // *** ======= ***
205 // *** CORRESPONDING BACKGROUND MEMORY FILE ***
206 // *** IS EMPTY, ***
207 // *** CHECK PREREQUISITES: ***
208 // *** COMMAND TRANS FILE WAS NOT EXECUTED, ***
209 // *** ERROR: L FC 33. ***
210 // *** ***
211 // *** RECORDING OF IAR DATA IMPOSSIBLE. ***
212 // *** ***
213 // *** PROCEDURE IS FINISHED. ***
214 // **********************************************
215 /
216 <RSET MO:VSN=VSNNR1;
217 /
218 <SETCFOPT:OFF=1&3&&11,ON=2,SCOPE=GLOBAL;
219 <SKIPCMD:LABEL=END;
220 /
221 .AB4 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
222 // ****************
223 // *** FAULT 04 ***
224 // ****************
225 // **********************************************
226 // *** LABELING OF IAR DATA RECORD MO ***
227 // *** (COPY) NOT EXECUTED. ***
228 // *** MOD STATION OFFLINE OR DEFECTIVE OR ***
229 // *** MO DAMAGED: ***
230 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
231 // *** ***
232 // *** START COMMAND FILE CG.SA.RDIAR AGAIN. ***
233 // **********************************************
234 /
235 <SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL;
236 <SKIPCMD:LABEL=END;
237 /
238 .AB5 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
239 // ****************
240 // *** FAULT 05 ***
241 // ****************
242 // **********************************************
243 // *** RECORDING OF IAR DATA (COPY) ***
244 // *** NOT EXECUTED. ***
245 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
246 // *** ***
247 // *** START COMMAND FILE CG.SA.RDIAR AGAIN. ***
248 // **********************************************
249 /
250 <RSET MO:VSN=VSNNR2;

MMN:SW-COFIP-316 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

RDIAR

251 /
252 <SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL;
253 <SKIPCMD:LABEL=END;
254 /
255 .OUT <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
256 /
257 // *******************************
258 // *** FINISHED WITHOUT FAULTS ***
259 // *******************************
260 // *******************************************
261 // *** REMOVE IAR DATA RECORD MO (COPY). ***
262 // *** ***
263 // *** IAR DATA RECORDING IS FINISHED. ***
264 // *******************************************
265 /
266 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
267 <SKIPCMD:LABEL=END;
268 /
269 .END <SETCFOPT:ACKCFS=ERROR,DANCMD=NOEXEC,ACKREQ=NEG,SCOPE=GLOBAL;
270 <ENDFILE;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-317
MMN:SW Maintenance
Software

RDINA

1 <CMDFILE;
2 /
3 // 80-RDINA-01
4 /
5 /****V01***************************************************************
6 /* *
7 /* COMMAND FILE CG.SA.RDINA FOR RECORDING OF INA DATA *
8 /* ================================================== *
9 /* *
10 /* TASK DESCRIPTION: *
11 /* ----------------- *
12 /* - RECORDING OF INDIVIDUAL CALL DATA *
13 /* *
14 /* HOLD MO READY/LOADING LOADMOD STATION: *
15 /* ---------------------------------- *
16 /* - A MOD (MAGNETO OPTICAL DISK) WITHOUT WRITE PROTECT *
17 /* IS TO BE HELD READY *
18 /* - BEFORE STARTING THE COMMAND FILE THE MOD STATION *
19 /* IS TO BE LOADED *
20 /* *
21 /* FAULT HANDLING: *
22 /* ----------------- *
23 /* - AFTER INTERRUPTION OF THE FILE PROCESSING VIA FAULT *
24 /* EXITS AND CORRESPONDING FAULT HANDLING THE FILE CAN *
25 /* BE STARTED AGAIN *
26 /* *
27 /* SWITCH PRESETTINGS FOR START POINTS AND ENTRY POINTS: *
28 /* ===================================================== *
29 /* START POINT SWITCH PRESETTINGS *
30 /* ----------- ------------------ *
31 /* RESETCFOPT; *
32 /* *
33 /* ENTRY POINT SWITCH PRESETTINGS *
34 /* ------------ ------------------ *
35 /* M1 SETCFOPT:OFF=1&&11,SCOPE=GLOBAL; *
36 /* M3 SETCFOPT:OFF=1&3&&11,ON=2,SCOPE=GLOBAL; *
37 /* M7 SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL; *
38 /* *
39 /* FAULT 01 SETCFOPT:OFF=1&&11,SCOPE=GLOBAL; *
40 /* FAULT 02,03 SETCFOPT:OFF=1&3&&11,ON=2,SCOPE=GLOBAL; *
41 /* FAULT 04,05 SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL; *
42 /* *
43 /**********************************************************************
44 /
45 <SETCFOPT:ACKCFS=ERROR,DANCMD=EXEC,ACKREQ=POS,SCOPE=GLOBAL;
46 /
47 <SKIPCMD:LABEL=END,ON=1;
48 <SKIPCMD:LABEL=M3,ON=2;
49 <SKIPCMD:LABEL=M7,ON=3;
50 /

MMN:SW-COFIP-318 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

RDINA

51 .M1 <STEP;
52 // ***************************
53 // * DISK SAVING OF INA DATA *
54 // ***************************
55 /
56 <TRANS BUFFER:TYPE=INA;
57 <SKIPCMD:LABEL=AB1,ON=32;
58 /
59 .M2 <STEP;
60 // ***********************************
61 // * DISPLAYING INA DATA FILE STATUS *
62 // ***********************************
63 /
64 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
65 <DISP FILE:FILE=IA.ICINA,ALL;
66 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
67 /
68 .M3 <STEP;
69 // ********************************************
70 // * LABELING INA DATA RECORD MO (ORIGINAL) *
71 // ********************************************
72 /
73 <INIT MO:VSN=VSNNR1,MOD=00,CD=ISO,DENS=6250;
74 <SKIPCMD:LABEL=AB2,ON=32;
75 /
76 .M4 <STEP;
77 // *****************************************
78 // * RECORDING INA DATA (ORIGINAL) STARTED *
79 // *****************************************
80 /
81 <TRANS FILE:VSNR=VSNNR1,FILE=KDEDATA.EWSD/IA.ICINA,COPMOD=POST;
82 <SKIPCMD:LABEL=AB3,ON=32;
83 /
84 <RSET MO:VSN=VSNNR1;
85 /
86 .M5 <STEP;
87 // ***************************************
88 // * RECORDING INA DATA (ORIGINAL) ENDED *
89 // ***************************************
90 /
91 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
92 <DISP FILE:VSN=VSNNR1;
93 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
94 /
95 .M6 <STEP;
96 // *******************************************
97 // * REMOVE INA DATA RECORD MO (ORIGINAL), *
98 // * MOUNT A MO WITHOUT WRITE PROTRCTION *
99 // * FOR RECORDING INA DATA (COPY). *
100 // * *

A30808-X3080-C485-5-7620 MMN:SW-COFIP-319
MMN:SW Maintenance
Software

RDINA

101 // * START COMMAND FILE CG.SA.RDINA AGAIN. *

102 // *******************************************
103 /
104 <SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL;
105 <SKIPCMD:LABEL=END;
106 /
107 .M7 <STEP;
108 // ****************************************
109 // * LABELING INA DATA RECORD MO (COPY) *
110 // ****************************************
111 /
112 <INIT MO:VSN=VSNNR2,MOD=00,CD=ISO,DENS=6250;
113 <SKIPCMD:LABEL=AB4,ON=32;
114 /
115 .M8 <STEP;
116 // *************************************
117 // * RECORDING INA DATA (COPY) STARTED *
118 // *************************************
119 /
120 <TRANS FILE:VSNR=VSNNR2,FILE=KDEDATA.EWSD/IA.ICINA,COPMOD=POST;
121 <SKIPCMD:LABEL=AB5,ON=32;
122 /
123 <RSET MO:VSN=VSNNR2;
124 /
125 .M9 <STEP;
126 // ***********************************
127 // * RECORDING INA DATA (COPY) ENDED *
128 // ***********************************
129 /
130 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
131 <DISP FILE:VSN=VSNNR2;
132 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
133 /
134 .MA <STEP;
135 // ************************************************
136 // * RELEASING RECORDED FILE AREA FOR OVERWRITING *
137 // ************************************************
138 /
139 <REL CYCFILE:FILE=IA.ICINA;
140 /
141 .MB <STEP;
142 // ***********************************
143 // * DISPLAYING INA DATA FILE STATUS *
144 // ***********************************
145 /
146 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
147 <DISP FILE:FILE=IA.ICINA,ALL;
148 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
149 /
150 <SKIPCMD:LABEL=OUT;

MMN:SW-COFIP-320 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

RDINA

151 / *******************************
152 / * FAULT EXITS AND END MESSAGE *
153 / *******************************
154 /
155 .AB1 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
156 <DISP FILE:FILE=IA.ICINA,ALL;
157 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
158 // ****************
159 // *** FAULT 01 ***
160 // ****************
161 // **********************************************
162 // *** DISK SAVING OF INA DATA NOT EXECUTED. ***
163 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
164 // *** ***
165 // *** START COMMAND FILE CG.SA.RDINA AGAIN. ***
166 // **********************************************
167 /
168 <SETCFOPT:OFF=1&&11,SCOPE=GLOBAL;
169 <SKIPCMD:LABEL=END;
170 /
171 .AB2 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
172 // ****************
173 // *** FAULT 02 ***
174 // ****************
175 // **********************************************
176 // *** LABELING OF INA DATA RECORD MO ***
177 // *** (ORIGINAL) NOT EXECUTED. ***
178 // *** MOD STATION OFFLINE OR DEFECTIVE OR ***
179 // *** MO DAMAGED: ***
180 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
181 // *** ***
182 // *** START COMMAND FILE CG.SA.RDINA AGAIN. ***
183 // **********************************************
184 /
185 <SETCFOPT:OFF=1&3&&11,ON=2,SCOPE=GLOBAL;
186 <SKIPCMD:LABEL=END;
187 /
188 .AB3 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
189 // ****************
190 // *** FAULT 03 ***
191 // ****************
192 // **********************************************
193 // *** RECORDING OF INA DATA (ORIGINAL) ***
194 // *** NOT EXECUTED. ***
195 // *** ***
196 // *** CASE 1: ***
197 // *** ======= ***
198 // *** MO DAMAGED OR FILE NOT AVAILABLE, ***
199 // *** CHECK PREREQUISITES, ELIMINATE FAULTS, ***
200 // *** ***

A30808-X3080-C485-5-7620 MMN:SW-COFIP-321
MMN:SW Maintenance
Software

RDINA

201 // *** START COMMAND FILE CG.SA.RDINA AGAIN. ***

202 // *** ***
203 // *** CASE 2: ***
204 // *** ======= ***
205 // *** CORRESPONDING BACKGROUND MEMORY FILE ***
206 // *** IS EMPTY, ***
207 // *** CHECK PREREQUISITES: ***
208 // *** COMMAND TRANS FILE WAS NOT EXECUTED, ***
209 // *** ERROR: L FC 33. ***
210 // *** ***
211 // *** RECORDING OF INA DATA IMPOSSIBLE. ***
212 // *** ***
213 // *** PROCEDURE IS FINISHED. ***
214 // **********************************************
215 /
216 <RSET MO:VSN=VSNNR1;
217 /
218 <SETCFOPT:OFF=1&3&&11,ON=2,SCOPE=GLOBAL;
219 <SKIPCMD:LABEL=END;
220 /
221 .AB4 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
222 // ****************
223 // *** FAULT 04 ***
224 // ****************
225 // **********************************************
226 // *** LABELING OF INA DATA RECORD MO ***
227 // *** (COPY) NOT EXECUTED. ***
228 // *** MOD STATION OFFLINE OR DEFECTIVE OR ***
229 // *** MO DAMAGED: ***
230 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
231 // *** ***
232 // *** START COMMAND FILE CG.SA.RDINA AGAIN. ***
233 // **********************************************
234 /
235 <SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL;
236 <SKIPCMD:LABEL=END;
237 /
238 .AB5 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
239 // ****************
240 // *** FAULT 05 ***
241 // ****************
242 // **********************************************
243 // *** RECORDING OF INA DATA (COPY) ***
244 // *** NOT EXECUTED. ***
245 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
246 // *** ***
247 // *** START COMMAND FILE CG.SA.RDINA AGAIN. ***
248 // **********************************************
249 /
250 <RSET MO:VSN=VSNNR2;

MMN:SW-COFIP-322 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

RDINA

251 /
252 <SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL;
253 <SKIPCMD:LABEL=END;
254 /
255 .OUT <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
256 /
257 // *******************************
258 // *** FINISHED WITHOUT FAULTS ***
259 // *******************************
260 // *******************************************
261 // *** REMOVE INA DATA RECORD MO (COPY). ***
262 // *** ***
263 // *** INA DATA RECORDING IS FINISHED. ***
264 // *******************************************
265 /
266 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
267 <SKIPCMD:LABEL=END;
268 /
269 .END <SETCFOPT:ACKCFS=ERROR,DANCMD=NOEXEC,ACKREQ=NEG,SCOPE=GLOBAL;
270 <ENDFILE;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-323
MMN:SW Maintenance
Software

RDMAL

1 <CMDFILE;
2 /
3 // 80-RDMAL-01
4 /
5 /****V01***************************************************************
6 /* *
7 /* COMMAND FILE CG.SA.RDMAL FOR RECORDING OF MAL DATA *
8 /* ================================================== *
9 /* *
10 /* TASK DESCRIPTION: *
11 /* ----------------- *
12 /* - RECORDING OF INDIVIDUAL CALL DATA *
13 /* *
14 /* HOLD MO READY/LOADING LOADMOD STATION: *
15 /* ---------------------------------- *
16 /* - A MOD (MAGNETO OPTICAL DISK) WITHOUT WRITE PROTECT *
17 /* IS TO BE HELD READY *
18 /* - BEFORE STARTING THE COMMAND FILE THE MOD STATION *
19 /* IS TO BE LOADED *
20 /* *
21 /* FAULT HANDLING: *
22 /* ----------------- *
23 /* - AFTER INTERRUPTION OF THE FILE PROCESSING VIA FAULT *
24 /* EXITS AND CORRESPONDING FAULT HANDLING THE FILE CAN *
25 /* BE STARTED AGAIN *
26 /* *
27 /* SWITCH PRESETTINGS FOR START POINTS AND ENTRY POINTS: *
28 /* ===================================================== *
29 /* START POINT SWITCH PRESETTINGS *
30 /* ----------- ------------------ *
31 /* RESETCFOPT; *
32 /* *
33 /* ENTRY POINT SWITCH PRESETTINGS *
34 /* ----------- ------------------ *
35 /* M1 SETCFOPT:OFF=1&&11,SCOPE=GLOBAL; *
36 /* M3 SETCFOPT:OFF=1&3&&11,ON=2,SCOPE=GLOBAL; *
37 /* M7 SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL; *
38 /* *
39 /* FAULT 01 SETCFOPT:OFF=1&&11,SCOPE=GLOBAL; *
40 /* FAULT 02,03 SETCFOPT:OFF=1&3&&11,ON=2,SCOPE=GLOBAL; *
41 /* FAULT 04,05 SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL; *
42 /* *
43 /**********************************************************************
44 /
45 <SETCFOPT:ACKCFS=ERROR,DANCMD=EXEC,ACKREQ=POS,SCOPE=GLOBAL;
46 /
47 <SKIPCMD:LABEL=END,ON=1;
48 <SKIPCMD:LABEL=M3,ON=2;
49 <SKIPCMD:LABEL=M7,ON=3;
50 /

MMN:SW-COFIP-324 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

RDMAL

51 .M1 <STEP;
52 // ***************************
53 // * DISK SAVING OF MAL DATA *
54 // ***************************
55 /
56 <TRANS BUFFER:TYPE=MAL;
57 <SKIPCMD:LABEL=AB1,ON=32;
58 /
59 .M2 <STEP;
60 // ***********************************
61 // * DISPLAYING MAL DATA FILE STATUS *
62 // ***********************************
63 /
64 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
65 <DISP FILE:FILE=IA.ICMAL,ALL;
66 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
67 /
68 .M3 <STEP;
69 // ********************************************
70 // * LABELING MAL DATA RECORD MO (ORIGINAL) *
71 // ********************************************
72 /
73 <INIT MO:VSN=VSNNR1,MOD=00,CD=ISO,DENS=6250;
74 <SKIPCMD:LABEL=AB2,ON=32;
75 /
76 .M4 <STEP;
77 // *****************************************
78 // * RECORDING MAL DATA (ORIGINAL) STARTED *
79 // *****************************************
80 /
81 <TRANS FILE:VSNR=VSNNR1,FILE=KDEDATA.EWSD/IA.ICMAL,COPMOD=POST;
82 <SKIPCMD:LABEL=AB3,ON=32;
83 /
84 <RSET MO:VSN=VSNNR1;
85 /
86 .M5 <STEP;
87 // ***************************************
88 // * RECORDING MAL DATA (ORIGINAL) ENDED *
89 // ***************************************
90 /
91 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
92 <DISP FILE:VSN=VSNNR1;
93 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
94 /
95 .M6 <STEP;
96 // *******************************************
97 // * REMOVE MAL DATA RECORD MO (ORIGINAL), *
98 // * MOUNT A MO WITHOUT WRITE PROTRCTION *
99 // * FOR RECORDING MAL DATA (COPY). *
100 // * *

A30808-X3080-C485-5-7620 MMN:SW-COFIP-325
MMN:SW Maintenance
Software

RDMAL

101 // * START COMMAND FILE CG.SA.RDMAL AGAIN. *

102 // *******************************************
103 /
104 <SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL;
105 <SKIPCMD:LABEL=END;
106 /
107 .M7 <STEP;
108 // ****************************************
109 // * LABELING MAL DATA RECORD MO (COPY) *
110 // ****************************************
111 /
112 <INIT MO:VSN=VSNNR2,MOD=00,CD=ISO,DENS=6250;
113 <SKIPCMD:LABEL=AB4,ON=32;
114 /
115 .M8 <STEP;
116 // *************************************
117 // * RECORDING MAL DATA (COPY) STARTED *
118 // *************************************
119 /
120 <TRANS FILE:VSNR=VSNNR2,FILE=KDEDATA.EWSD/IA.ICMAL,COPMOD=POST;
121 <SKIPCMD:LABEL=AB5,ON=32;
122 /
123 <RSET MO:VSN=VSNNR2;
124 /
125 .M9 <STEP;
126 // ***********************************
127 // * RECORDING MAL DATA (COPY) ENDED *
128 // ***********************************
129 /
130 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
131 <DISP FILE:VSN=VSNNR2;
132 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
133 /
134 .MA <STEP;
135 // ************************************************
136 // * RELEASING RECORDED FILE AREA FOR OVERWRITING *
137 // ************************************************
138 /
139 <REL CYCFILE:FILE=IA.ICMAL;
140 /
141 .MB <STEP;
142 // ***********************************
143 // * DISPLAYING MAL DATA FILE STATUS *
144 // ***********************************
145 /
146 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
147 <DISP FILE:FILE=IA.ICMAL,ALL;
148 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
149 /
150 <SKIPCMD:LABEL=OUT;

MMN:SW-COFIP-326 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

RDMAL

151 / *******************************
152 / * FAULT EXITS AND END MESSAGE *
153 / *******************************
154 /
155 .AB1 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
156 <DISP FILE:FILE=IA.ICMAL,ALL;
157 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
158 // ****************
159 // *** FAULT 01 ***
160 // ****************
161 // **********************************************
162 // *** DISK SAVING OF MAL DATA NOT EXECUTED. ***
163 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
164 // *** ***
165 // *** START COMMAND FILE CG.SA.RDMAL AGAIN. ***
166 // **********************************************
167 /
168 <SETCFOPT:OFF=1&&11,SCOPE=GLOBAL;
169 <SKIPCMD:LABEL=END;
170 /
171 .AB2 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
172 // ****************
173 // *** FAULT 02 ***
174 // ****************
175 // **********************************************
176 // *** LABELING OF MAL DATA RECORD MO ***
177 // *** (ORIGINAL) NOT EXECUTED. ***
178 // *** MOD STATION OFFLINE OR DEFECTIVE OR ***
179 // *** MO DAMAGED: ***
180 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
181 // *** ***
182 // *** START COMMAND FILE CG.SA.RDMAL AGAIN. ***
183 // **********************************************
184 /
185 <SETCFOPT:OFF=1&3&&11,ON=2,SCOPE=GLOBAL;
186 <SKIPCMD:LABEL=END;
187 /
188 .AB3 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
189 // ****************
190 // *** FAULT 03 ***
191 // ****************
192 // **********************************************
193 // *** RECORDING OF MAL DATA (ORIGINAL) ***
194 // *** NOT EXECUTED. ***
195 // *** ***
196 // *** CASE 1: ***
197 // *** ======= ***
198 // *** MO DAMAGED OR FILE NOT AVAILABLE, ***
199 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
200 // *** ***

A30808-X3080-C485-5-7620 MMN:SW-COFIP-327
MMN:SW Maintenance
Software

RDMAL

201 // *** START COMMAND FILE CG.SA.RDMAL AGAIN. ***

202 // *** ***
203 // *** CASE 2: ***
204 // *** ======= ***
205 // *** CORRESPONDING BACKGROUND MEMORY FILE ***
206 // *** IS EMPTY, ***
207 // *** CHECK PREREQUISITES: ***
208 // *** COMMAND TRANS FILE WAS NOT EXECUTED, ***
209 // *** ERROR: L FC 33. ***
210 // *** ***
211 // *** RECORDING OF MAL DATA IMPOSSIBLE. ***
212 // *** ***
213 // *** PROCEDURE IS FINISHED. ***
214 // **********************************************
215 /
216 <RSET MO:VSN=VSNNR1;
217 /
218 <SETCFOPT:OFF=1&3&&11,ON=2,SCOPE=GLOBAL;
219 <SKIPCMD:LABEL=END;
220 /
221 .AB4 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
222 // ****************
223 // *** FAULT 04 ***
224 // ****************
225 // **********************************************
226 // *** LABELING OF MAL DATA RECORD MO ***
227 // *** (COPY) NOT EXECUTED. ***
228 // *** MOD STATION OFFLINE OR DEFECTIVE OR ***
229 // *** MO DAMAGED: ***
230 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
231 // *** ***
232 // *** START COMMAND FILE CG.SA.RDMAL AGAIN. ***
233 // **********************************************
234 /
235 <SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL;
236 <SKIPCMD:LABEL=END;
237 /
238 .AB5 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
239 // ****************
240 // *** FAULT 05 ***
241 // ****************
242 // **********************************************
243 // *** RECORDING OF MAL DATA (COPY) ***
244 // *** NOT EXECUTED. ***
245 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
246 // *** ***
247 // *** START COMMAND FILE CG.SA.RDMAL AGAIN. ***
248 // **********************************************
249 /
250 <RSET MO:VSN=VSNNR2;

MMN:SW-COFIP-328 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

RDMAL

251 /
252 <SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL;
253 <SKIPCMD:LABEL=END;
254 /
255 .OUT <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
256 /
257 // *******************************
258 // *** FINISHED WITHOUT FAULTS ***
259 // *******************************
260 // *******************************************
261 // *** REMOVE MAL DATA RECORD MO (COPY). ***
262 // *** ***
263 // *** MAL DATA RECORDING IS FINISHED. ***
264 // *******************************************
265 /
266 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
267 <SKIPCMD:LABEL=END;
268 /
269 .END <SETCFOPT:ACKCFS=ERROR,DANCMD=NOEXEC,ACKREQ=NEG,SCOPE=GLOBAL;
270 <ENDFILE;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-329
MMN:SW Maintenance
Software

RDMOB

1 <CMDFILE;
2 /
3 // 80-RDMOB-01
4 /
5 /****V01***************************************************************
6 /* *
7 /* COMMAND FILE CG.SA.RDMOB FOR RECORDING OF MOB DATA *
8 /* ================================================== *
9 /* *
10 /* TASK DESCRIPTION: *
11 /* ----------------- *
12 /* - RECORDING OF INDIVIDUAL CALL DATA *
13 /* *
14 /* HOLD MO READY/LOADING LOADMOD STATION: *
15 /* ---------------------------------- *
16 /* - A MOD (MAGNETO OPTICAL DISK) WITHOUT WRITE PROTECT *
17 /* IS TO BE HELD READY *
18 /* - BEFORE STARTING THE COMMAND FILE THE MOD STATION *
19 /* IS TO BE LOADED *
20 /* *
21 /* FAULT HANDLING: *
22 /* ----------------- *
23 /* - AFTER INTERRUPTION OF THE FILE PROCESSING VIA FAULT *
24 /* EXITS AND CORRESPONDING FAULT HANDLING THE FILE CAN *
25 /* BE STARTED AGAIN *
26 /* *
27 /* SWITCH PRESETTINGS FOR START POINTS AND ENTRY POINTS: *
28 /* ===================================================== *
29 /* START POINT SWITCH PRESETTINGS *
30 /* ----------- ------------------ *
31 /* RESETCFOPT; *
32 /* *
33 /* ENTRY POINT SWITCH PRESETTINGS *
34 /* ----------- ------------------ *
35 /* M1 SETCFOPT:OFF=1&&11,SCOPE=GLOBAL; *
36 /* M3 SETCFOPT:OFF=1&3&&11,ON=2,SCOPE=GLOBAL; *
37 /* M7 SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL; *
38 /* *
39 /* FAULT 01 SETCFOPT:OFF=1&&11,SCOPE=GLOBAL; *
40 /* FAULT 02,03 SETCFOPT:OFF=1&3&&11,ON=2,SCOPE=GLOBAL; *
41 /* FAULT 04,05 SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL; *
42 /* *
43 /**********************************************************************
44 /
45 <SETCFOPT:ACKCFS=ERROR,DANCMD=EXEC,ACKREQ=POS,SCOPE=GLOBAL;
46 /
47 <SKIPCMD:LABEL=END,ON=1;
48 <SKIPCMD:LABEL=M3,ON=2;
49 <SKIPCMD:LABEL=M7,ON=3;
50 /

MMN:SW-COFIP-330 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

RDMOB

51 .M1 <STEP;
52 // ************************
53 // * DISK SAVING MOB DATA *
54 // ************************
55 /
56 <TRANS BUFFER:TYPE=MOB;
57 <SKIPCMD:LABEL=AB1,ON=32;
58 /
59 .M2 <STEP;
60 // ***********************************
61 // * DISPLAYING MOB DATA FILE STATUS *
62 // ***********************************
63 /
64 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
65 <DISP FILE:FILE=IA.ICMOB,ALL;
66 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
67 /
68 .M3 <STEP;
69 // ********************************************
70 // * LABELING MOB DATA RECORD MO (ORIGINAL) *
71 // ********************************************
72 /
73 <INIT MO:VSN=VSNNR1,MOD=00,CD=ISO,DENS=6250;
74 <SKIPCMD:LABEL=AB2,ON=32;
75 /
76 .M4 <STEP;
77 // *****************************************
78 // * RECORDING MOB DATA (ORIGINAL) STARTED *
79 // *****************************************
80 /
81 <TRANS FILE:VSNR=VSNNR1,FILE=KDEDATA.EWSD/IA.ICMOB,COPMOD=POST;
82 <SKIPCMD:LABEL=AB3,ON=32;
83 /
84 <RSET MO:VSN=VSNNR1;
85 /
86 .M5 <STEP;
87 // ***************************************
88 // * RECORDING MOB DATA (ORIGINAL) ENDED *
89 // ***************************************
90 /
91 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
92 <DISP FILE:VSN=VSNNR1;
93 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
94 /
95 .M6 <STEP;
96 // *******************************************
97 // * REMOVE MOB DATA RECORD MO (ORIGINAL), *
98 // * MOUNT A MO WITHOUT WRITE PROTRCTION *
99 // * FOR RECORDING MOB DATA (COPY). *
100 // * *

A30808-X3080-C485-5-7620 MMN:SW-COFIP-331
MMN:SW Maintenance
Software

RDMOB

101 // * START COMMAND FILE CG.SA.RDMOB AGAIN. *

102 // *******************************************
103 /
104 <SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL;
105 <SKIPCMD:LABEL=END;
106 /
107 .M7 <STEP;
108 // ****************************************
109 // * LABELING MOB DATA RECORD MO (COPY) *
110 // ****************************************
111 /
112 <INIT MO:VSN=VSNNR2,MOD=00,CD=ISO,DENS=6250;
113 <SKIPCMD:LABEL=AB4,ON=32;
114 /
115 .M8 <STEP;
116 // *************************************
117 // * RECORDING MOB DATA (COPY) STARTED *
118 // *************************************
119 /
120 <TRANS FILE:VSNR=VSNNR2,FILE=KDEDATA.EWSD/IA.ICMOB,COPMOD=POST;
121 <SKIPCMD:LABEL=AB5,ON=32;
122 /
123 <RSET MO:VSN=VSNNR2;
124 /
125 .M9 <STEP;
126 // ***********************************
127 // * RECORDING MOB DATA (COPY) ENDED *
128 // ***********************************
129 /
130 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
131 <DISP FILE:VSN=VSNNR2;
132 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
133 /
134 .MA <STEP;
135 // ************************************************
136 // * RELEASING RECORDED FILE AREA FOR OVERWRITING *
137 // ************************************************
138 /
139 <REL CYCFILE:FILE=IA.ICMOB;
140 /
141 .MB <STEP;
142 // ***********************************
143 // * DISPLAYING MOB DATA FILE STATUS *
144 // ***********************************
145 /
146 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
147 <DISP FILE:FILE=IA.ICMOB,ALL;
148 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
149 /
150 <SKIPCMD:LABEL=OUT;

MMN:SW-COFIP-332 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

RDMOB

151 / *******************************
152 / * FAULT EXITS AND END MESSAGE *
153 / *******************************
154 /
155 .AB1 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
156 <DISP FILE:FILE=IA.ICMOB,ALL;
157 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
158 // ****************
159 // *** FAULT 01 ***
160 // ****************
161 // **********************************************
162 // *** DISK SAVING OF MOB DATA NOT EXECUTED. ***
163 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
164 // *** ***
165 // *** START COMMAND FILE CG.SA.RDMOB AGAIN. ***
166 // **********************************************
167 /
168 <SETCFOPT:OFF=1&&11,SCOPE=GLOBAL;
169 <SKIPCMD:LABEL=END;
170 /
171 .AB2 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
172 // ****************
173 // *** FAULT 02 ***
174 // ****************
175 // **********************************************
176 // *** LABELING OF MOB DATA RECORD MO ***
177 // *** (ORIGINAL) NOT EXECUTED. ***
178 // *** MOD STATION OFFLINE OR DEFECTIVE OR ***
179 // *** MO DAMAGED: ***
180 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
181 // *** ***
182 // *** START COMMAND FILE CG.SA.RDMOB AGAIN. ***
183 // **********************************************
184 /
185 <SETCFOPT:OFF=1&3&&11,ON=2,SCOPE=GLOBAL;
186 <SKIPCMD:LABEL=END;
187 /
188 .AB3 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
189 // ****************
190 // *** FAULT 03 ***
191 // ****************
192 // **********************************************
193 // *** RECORDING OF MOB DATA (ORIGINAL) ***
194 // *** NOT EXECUTED. ***
195 // *** ***
196 // *** CASE 1: ***
197 // *** ======= ***
198 // *** MO DAMAGED OR FILE NOT AVAILABLE, ***
199 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
200 // *** ***

A30808-X3080-C485-5-7620 MMN:SW-COFIP-333
MMN:SW Maintenance
Software

RDMOB

201 // *** START COMMAND FILE CG.SA.RDMOB AGAIN. ***

202 // *** ***
203 // *** CASE 2: ***
204 // *** ======= ***
205 // *** CORRESPONDING BACKGROUND MEMORY FILE ***
206 // *** IS EMPTY, ***
207 // *** CHECK PREREQUISITES: ***
208 // *** COMMAND TRANS FILE WAS NOT EXECUTED, ***
209 // *** ERROR: L FC 33. ***
210 // *** ***
211 // *** RECORDING OF MOB DATA IMPOSSIBLE. ***
212 // *** ***
213 // *** PROCEDURE IS FINISHED. ***
214 // **********************************************
215 /
216 <RSET MO:VSN=VSNNR1;
217 /
218 <SETCFOPT:OFF=1&3&&11,ON=2,SCOPE=GLOBAL;
219 <SKIPCMD:LABEL=END;
220 /
221 .AB4 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
222 // ****************
223 // *** FAULT 04 ***
224 // ****************
225 // **********************************************
226 // *** LABELING OF MOB DATA RECORD MO ***
227 // *** (COPY) NOT EXECUTED. ***
228 // *** MOD STATION OFFLINE OR DEFECTIVE OR ***
229 // *** MO DAMAGED: ***
230 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
231 // *** ***
232 // *** START COMMAND FILE CG.SA.RDMOB AGAIN. ***
233 // **********************************************
234 /
235 <SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL;
236 <SKIPCMD:LABEL=END;
237 /
238 .AB5 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
239 // ****************
240 // *** FAULT 05 ***
241 // ****************
242 // **********************************************
243 // *** RECORDING OF MOB DATA (COPY) ***
244 // *** NOT EXECUTED. ***
245 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
246 // *** ***
247 // *** START COMMAND FILE CG.SA.RDMOB AGAIN. ***
248 // **********************************************
249 /
250 <RSET MO:VSN=VSNNR2;

MMN:SW-COFIP-334 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

RDMOB

251 /
252 <SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL;
253 <SKIPCMD:LABEL=END;
254 /
255 .OUT <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
256 /
257 // *******************************
258 // *** FINISHED WITHOUT FAULTS ***
259 // *******************************
260 // *******************************************
261 // *** REMOVE MOB DATA RECORD MO (COPY). ***
262 // *** ***
263 // *** MOB DATA RECORDING IS FINISHED. ***
264 // *******************************************
265 /
266 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
267 <SKIPCMD:LABEL=END;
268 /
269 .END <SETCFOPT:ACKCFS=ERROR,DANCMD=NOEXEC,ACKREQ=NEG,SCOPE=GLOBAL;
270 <ENDFILE;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-335
MMN:SW Maintenance
Software

RDPMB

1 <CMDFILE;
2 /
3 // 80-RDPMB-01
4 /
5 /****V01***************************************************************
6 /* *
7 /* COMMAND FILE CG.SA.RDPMB FOR RECORDING OF PREV. METER OBS. DATA *
8 /* =============================================================== *
9 /* *
10 /* TASK DESCRIPTION: *
11 /* ----------------- *
12 /* - RECORDING OF PREV. METER OBSERVATION DATA *
13 /* *
14 /* HOLD MO READY/LOADING LOADMOD STATION: *
15 /* ---------------------------------- *
16 /* - A MOD (MAGNETO OPTICAL DISK) WITHOUT WRITE PROTECT *
17 /* IS TO BE HELD READY *
18 /* - BEFORE STARTING THE COMMAND FILE THE MOD STATION *
19 /* IS TO BE LOADED *
20 /* *
21 /* FAULT HANDLING: *
22 /* ----------------- *
23 /* - AFTER INTERRUPTION OF THE FILE PROCESSING VIA FAULT *
24 /* EXITS AND CORRESPONDING FAULT HANDLING THE FILE CAN *
25 /* BE STARTED AGAIN *
26 /* *
27 /* SWITCH PRESETTINGS FOR START POINTS AND ENTRY POINTS: *
28 /* ===================================================== *
29 /* START POINT SWITCH PRESETTINGS *
30 /* ----------- ------------------ *
31 /* RESETCFOPT; *
32 /* *
33 /* ENTRY POINT SWITCH PRESETTINGS *
34 /* ------------ ------------------ *
35 /* M1 SETCFOPT:OFF=1&&11,SCOPE=GLOBAL; *
36 /* M3 SETCFOPT:OFF=1&3&&11,ON=2,SCOPE=GLOBAL; *
37 /* M7 SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL; *
38 /* *
39 /* FAULT 01 SETCFOPT:OFF=1&&11,SCOPE=GLOBAL; *
40 /* FAULT 02,03 SETCFOPT:OFF=1&3&&11,ON=2,SCOPE=GLOBAL; *
41 /* FAULT 04,05 SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL; *
42 /* *
43 /**********************************************************************
44 /
45 <SETCFOPT:ACKCFS=ERROR,DANCMD=EXEC,ACKREQ=POS,SCOPE=GLOBAL;
46 /
47 <SKIPCMD:LABEL=END,ON=1;
48 <SKIPCMD:LABEL=M3,ON=2;
49 <SKIPCMD:LABEL=M7,ON=3;
50 /

MMN:SW-COFIP-336 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

RDPMB

51 .M1 <STEP;
52 // ***************************
53 // * DISK SAVING OF PMB DATA *
54 // ***************************
55 /
56 <TRANS BUFFER:TYPE=PMB;
57 <SKIPCMD:LABEL=AB1,ON=32;
58 /
59 .M2 <STEP;
60 // ***********************************
61 // * DISPLAYING PMB DATA FILE STATUS *
62 // ***********************************
63 /
64 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
65 <DISP FILE:FILE=IA.ICPMB,ALL;
66 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
67 /
68 .M3 <STEP;
69 // ********************************************
70 // * LABELING PMB DATA RECORD MO (ORIGINAL) *
71 // ********************************************
72 /
73 <INIT MO:VSN=VSNNR1,MOD=00,CD=ISO,DENS=6250;
74 <SKIPCMD:LABEL=AB2,ON=32;
75 /
76 .M4 <STEP;
77 // *****************************************
78 // * RECORDING PMB DATA (ORIGINAL) STARTED *
79 // *****************************************
80 /
81 <TRANS FILE:VSNR=VSNNR1,FILE=KDEDATA.EWSD/IA.ICPMB,COPMOD=POST;
82 <SKIPCMD:LABEL=AB3,ON=32;
83 /
84 <RSET MO:VSN=VSNNR1;
85 /
86 .M5 <STEP;
87 // ***************************************
88 // * RECORDING PMB DATA (ORIGINAL) ENDED *
89 // ***************************************
90 /
91 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
92 <DISP FILE:VSN=VSNNR1;
93 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
94 /
95 .M6 <STEP;
96 /
97 // *******************************************
98 // * REMOVE PMB DATA RECORD MO (ORIGINAL), *
99 // * MOUNT A MO WITHOUT WRITE PROTRCTION *
100 // * FOR RECORDING PMB DATA (COPY). *

A30808-X3080-C485-5-7620 MMN:SW-COFIP-337
MMN:SW Maintenance
Software

RDPMB

101 // * *
102 // * START COMMAND FILE CG.SA.RDPMB AGAIN. *
103 // *******************************************
104 /
105 <SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL;
106 <SKIPCMD:LABEL=END;
107 /
108 .M7 <STEP;
109 // ****************************************
110 // * LABELING PMB DATA RECORD MO (COPY) *
111 // ****************************************
112 /
113 <INIT MO:VSN=VSNNR2,MOD=00,CD=ISO,DENS=6250;
114 <SKIPCMD:LABEL=AB4,ON=32;
115 /
116 .M8 <STEP;
117 // *************************************
118 // * RECORDING PMB DATA (COPY) STARTED *
119 // *************************************
120 /
121 <TRANS FILE:VSNR=VSNNR2,FILE=KDEDATA.EWSD/IA.ICPMB,COPMOD=POST;
122 <SKIPCMD:LABEL=AB5,ON=32;
123 /
124 <RSET MO:VSN=VSNNR2;
125 /
126 .M9 <STEP;
127 // ***********************************
128 // * RECORDING PMB DATA (COPY) ENDED *
129 // ***********************************
130 /
131 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
132 <DISP FILE:VSN=VSNNR2;
133 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
134 /
135 .MA <STEP;
136 // ************************************************
137 // * RELEASING RECORDED FILE AREA FOR OVERWRITING *
138 // ************************************************
139 /
140 <REL CYCFILE:FILE=IA.ICPMB;
141 /
142 .MB <STEP;
143 // ***********************************
144 // * DISPLAYING PMB DATA FILE STATUS *
145 // ***********************************
146 /
147 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
148 <DISP FILE:FILE=IA.ICPMB,ALL;
149 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
150 /

MMN:SW-COFIP-338 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

RDPMB

151 <SKIPCMD:LABEL=OUT;
152 / *******************************
153 / * FAULT EXITS AND END MESSAGE *
154 / *******************************
155 /
156 .AB1 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
157 <DISP FILE:FILE=IA.ICPMB,ALL;
158 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
159 // ****************
160 // *** FAULT 01 ***
161 // ****************
162 // **********************************************
163 // *** DISK SAVING OF PMB DATA NOT EXECUTED. ***
164 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
165 // *** ***
166 // *** START COMMAND FILE CG.SA.RDPMB AGAIN. ***
167 // **********************************************
168 /
169 <SETCFOPT:OFF=1&&11,SCOPE=GLOBAL;
170 <SKIPCMD:LABEL=END;
171 /
172 .AB2 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
173 // ****************
174 // *** FAULT 02 ***
175 // ****************
176 // **********************************************
177 // *** LABELING OF PMB DATA RECORD MO ***
178 // *** (ORIGINAL) NOT EXECUTED. ***
179 // *** MOD STATION OFFLINE OR DEFECTIVE OR ***
180 // *** MO DAMAGED: ***
181 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
182 // *** ***
183 // *** START COMMAND FILE CG.SA.RDPMB AGAIN. ***
184 // **********************************************
185 /
186 <SETCFOPT:OFF=1&3&&11,ON=2,SCOPE=GLOBAL;
187 <SKIPCMD:LABEL=END;
188 /
189 .AB3 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
190 // ****************
191 // *** FAULT 03 ***
192 // ****************
193 // **********************************************
194 // *** RECORDING OF PMB DATA (ORIGINAL) ***
195 // *** NOT EXECUTED. ***
196 // *** ***
197 // *** CASE 1: ***
198 // *** ======= ***
199 // *** MO DAMAGED OR FILE NOT AVAILABLE, ***
200 // *** CHECK PREREQUISITES, ELIMINATE FAULTS, ***

A30808-X3080-C485-5-7620 MMN:SW-COFIP-339
MMN:SW Maintenance
Software

RDPMB

201 // *** ***

202 // *** START COMMAND FILE CG.SA.RDPMB AGAIN. ***
203 // *** ***
204 // *** CASE 2: ***
205 // *** ======= ***
206 // *** CORRESPONDING BACKGROUND MEMORY FILE ***
207 // *** IS EMPTY, ***
208 // *** CHECK PREREQUISITES: ***
209 // *** COMMAND TRANS FILE WAS NOT EXECUTED, ***
210 // *** ERROR: L FC 33. ***
211 // *** ***
212 // *** RECORDING OF PMB DATA IMPOSSIBLE. ***
213 // *** ***
214 // *** PROCEDURE IS FINISHED. ***
215 // **********************************************
216 /
217 <RSET MO:VSN=VSNNR1;
218 /
219 <SETCFOPT:OFF=1&3&&11,ON=2,SCOPE=GLOBAL;
220 <SKIPCMD:LABEL=END;
221 /
222 .AB4 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
223 // ****************
224 // *** FAULT 04 ***
225 // ****************
226 // **********************************************
227 // *** LABELING OF PMB DATA RECORD MO ***
228 // *** (COPY) NOT EXECUTED. ***
229 // *** MOD STATION OFFLINE OR DEFECTIVE OR ***
230 // *** MO DAMAGED: ***
231 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
232 // *** ***
233 // *** START COMMAND FILE CG.SA.RDPMB AGAIN. ***
234 // **********************************************
235 /
236 <SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL;
237 <SKIPCMD:LABEL=END;
238 /
239 .AB5 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
240 // ****************
241 // *** FAULT 05 ***
242 // ****************
243 // **********************************************
244 // *** RECORDING OF PMB DATA (COPY) ***
245 // *** NOT EXECUTED. ***
246 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
247 // *** ***
248 // *** START COMMAND FILE CG.SA.RDPMB AGAIN. ***
249 // **********************************************
250 /

MMN:SW-COFIP-340 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

RDPMB

251 <RSET MO:VSN=VSNNR2;

252 /
253 <SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL;
254 <SKIPCMD:LABEL=END;
255 /
256 .OUT <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
257 /
258 // *******************************
259 // *** FINISHED WITHOUT FAULTS ***
260 // *******************************
261 // *******************************************
262 // *** REMOVE PMB DATA RECORD MO (COPY). ***
263 // *** ***
264 // *** PMB DATA RECORDING IS FINISHED. ***
265 // *******************************************
266 /
267 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
268 <SKIPCMD:LABEL=END;
269 /
270 .END <SETCFOPT:ACKCFS=ERROR,DANCMD=NOEXEC,ACKREQ=NEG,SCOPE=GLOBAL;
271 <ENDFILE;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-341
MMN:SW Maintenance
Software

RDTOB

1 <CMDFILE;
2 /
3 // 80-RDTOB-01
4 /
5 /****V01***************************************************************
6 /* *
7 /* COMMAND FILE CG.SA.RDTOB FOR RECORDING OF TOB DATA *
8 /* ================================================== *
9 /* *
10 /* TASK DESCRIPTION: *
11 /* ----------------- *
12 /* - RECORDING OF TRAFFIC DATA *
13 /* *
14 /* HOLD MO READY/LOADING LOADMOD STATION: *
15 /* ---------------------------------- *
16 /* - A MOD (MAGNETO OPTICAL DISK) WITHOUT WRITE PROTECT *
17 /* IS TO BE HELD READY *
18 /* - BEFORE STARTING THE COMMAND FILE THE MOD STATION *
19 /* IS TO BE LOADED *
20 /* *
21 /* FAULT HANDLING: *
22 /* ----------------- *
23 /* - AFTER INTERRUPTION OF THE FILE PROCESSING VIA FAULT *
24 /* EXITS AND CORRESPONDING FAULT HANDLING THE FILE CAN *
25 /* BE STARTED AGAIN *
26 /* *
27 /* SWITCH PRESETTINGS FOR START POINTS AND ENTRY POINTS: *
28 /* ===================================================== *
29 /* START POINT SWITCH PRESETTINGS *
30 /* ----------- ------------------ *
31 /* RESETCFOPT; *
32 /* *
33 /* ENTRY POINT SWITCH PRESETTINGS *
34 /* ------------ ------------------ *
35 /* M1 SETCFOPT:OFF=1&&11,SCOPE=GLOBAL; *
36 /* M3 SETCFOPT:OFF=1&3&&11,ON=2,SCOPE=GLOBAL; *
37 /* M7 SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL; *
38 /* *
39 /* FAULT 01 SETCFOPT:OFF=1&&11,SCOPE=GLOBAL; *
40 /* FAULT 02,03 SETCFOPT:OFF=1&3&&11,ON=2,SCOPE=GLOBAL; *
41 /* FAULT 04,05 SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL; *
42 /* *
43 /**********************************************************************
44 /
45 <SETCFOPT:ACKCFS=ERROR,DANCMD=EXEC,ACKREQ=POS,SCOPE=GLOBAL;
46 /
47 <SKIPCMD:LABEL=END,ON=1;
48 <SKIPCMD:LABEL=M3,ON=2;
49 <SKIPCMD:LABEL=M7,ON=3;
50 /

MMN:SW-COFIP-342 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

RDTOB

51 .M1 <STEP;
52 // ***************************
53 // * DISK SAVING OF TOB DATA *
54 // ***************************
55 /
56 <TRANS BUFFER:TYPE=TOB;
57 <SKIPCMD:LABEL=AB1,ON=32;
58 /
59 .M2 <STEP;
60 // ***********************************
61 // * DISPLAYING TOB DATA FILE STATUS *
62 // ***********************************
63 /
64 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
65 <DISP FILE:FILE=IA.ICTOB,ALL;
66 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
67 /
68 .M3 <STEP;
69 // ********************************************
70 // * LABELING TOB DATA RECORD MO (ORIGINAL) *
71 // ********************************************
72 /
73 <INIT MO:VSN=VSNNR1,MOD=00,CD=ISO,DENS=6250;
74 <SKIPCMD:LABEL=AB2,ON=32;
75 /
76 .M4 <STEP;
77 // *****************************************
78 // * RECORDING TOB DATA (ORIGINAL) STARTED *
79 // *****************************************
80 /
81 <TRANS FILE:VSNR=VSNNR1,FILE=KDEDATA.EWSD/IA.ICTOB,COPMOD=POST;
82 <SKIPCMD:LABEL=AB3,ON=32;
83 /
84 <RSET MO:VSN=VSNNR1;
85 /
86 .M5 <STEP;
87 // ***************************************
88 // * RECORDING TOB DATA (ORIGINAL) ENDED *
89 // ***************************************
90 /
91 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
92 <DISP FILE:VSN=VSNNR1;
93 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
94 /
95 .M6 <STEP;
96 // *******************************************
97 // * REMOVE TOB DATA RECORD MO (ORIGINAL), *
98 // * MOUNT A MO WITHOUT WRITE PROTRCTION *
99 // * FOR RECORDING TOB DATA (COPY). *
100 // * *

A30808-X3080-C485-5-7620 MMN:SW-COFIP-343
MMN:SW Maintenance
Software

RDTOB

101 // * START COMMAND FILE CG.SA.RDTOB AGAIN. *

102 // *******************************************
103 /
104 <SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL;
105 <SKIPCMD:LABEL=END;
106 /
107 .M7 <STEP;
108 // ****************************************
109 // * LABELING TOB DATA RECORD MO (COPY) *
110 // ****************************************
111 /
112 <INIT MO:VSN=VSNNR2,MOD=00,CD=ISO,DENS=6250;
113 <SKIPCMD:LABEL=AB4,ON=32;
114 /
115 .M8 <STEP;
116 // *************************************
117 // * RECORDING TOB DATA (COPY) STARTED *
118 // *************************************
119 /
120 <TRANS FILE:VSNR=VSNNR2,FILE=KDEDATA.EWSD/IA.ICTOB,COPMOD=POST;
121 <SKIPCMD:LABEL=AB5,ON=32;
122 /
123 <RSET MO:VSN=VSNNR2;
124 /
125 .M9 <STEP;
126 // ***********************************
127 // * RECORDING TOB DATA (COPY) ENDED *
128 // ***********************************
129 /
130 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
131 <DISP FILE:VSN=VSNNR2;
132 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
133 /
134 .MA <STEP;
135 // ************************************************
136 // * RELEASING RECORDED FILE AREA FOR OVERWRITING *
137 // ************************************************
138 /
139 <REL CYCFILE:FILE=IA.ICTOB;
140 /
141 .MB <STEP;
142 // ***********************************
143 // * DISPLAYING TOB DATA FILE STATUS *
144 // ***********************************
145 /
146 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
147 <DISP FILE:FILE=IA.ICTOB,ALL;
148 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
149 /
150 <SKIPCMD:LABEL=OUT;

MMN:SW-COFIP-344 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

RDTOB

151 / *******************************
152 / * FAULT EXITS AND END MESSAGE *
153 / *******************************
154 /
155 .AB1 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
156 <DISP FILE:FILE=IA.ICTOB,ALL;
157 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
158 // ****************
159 // *** FAULT 01 ***
160 // ****************
161 // **********************************************
162 // *** DISK SAVING OF TOB DATA NOT EXECUTED. ***
163 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
164 // *** ***
165 // *** START COMMAND FILE CG.SA.RDTOB AGAIN. ***
166 // **********************************************
167 /
168 <SETCFOPT:OFF=1&&11,SCOPE=GLOBAL;
169 <SKIPCMD:LABEL=END;
170 /
171 .AB2 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
172 // ****************
173 // *** FAULT 02 ***
174 // ****************
175 // **********************************************
176 // *** LABELING OF TOB DATA RECORD MO ***
177 // *** (ORIGINAL) NOT EXECUTED. ***
178 // *** MOD STATION OFFLINE OR DEFECTIVE OR ***
179 // *** MO DAMAGED: ***
180 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
181 // *** ***
182 // *** START COMMAND FILE CG.SA.RDTOB AGAIN. ***
183 // **********************************************
184 /
185 <SETCFOPT:OFF=1&3&&11,ON=2,SCOPE=GLOBAL;
186 <SKIPCMD:LABEL=END;
187 /
188 .AB3 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
189 // ****************
190 // *** FAULT 03 ***
191 // ****************
192 // **********************************************
193 // *** RECORDING OF TOB DATA (ORIGINAL) ***
194 // *** NOT EXECUTED. ***
195 // *** ***
196 // *** CASE 1: ***
197 // *** ======= ***
198 // *** MO DAMAGED OR FILE NOT AVAILABLE, ***
199 // *** CHECK PREREQUISITES, ELIMINATE FAULTS, ***
200 // *** ***

A30808-X3080-C485-5-7620 MMN:SW-COFIP-345
MMN:SW Maintenance
Software

RDTOB

201 // *** START COMMAND FILE CG.SA.RDTOB AGAIN. ***

202 // *** ***
203 // *** CASE 2: ***
204 // *** ======= ***
205 // *** CORRESPONDING BACKGROUND MEMORY FILE ***
206 // *** IS EMPTY, ***
207 // *** CHECK PREREQUISITES: ***
208 // *** COMMAND TRANS FILE WAS NOT EXECUTED, ***
209 // *** ERROR: L FC 33. ***
210 // *** ***
211 // *** RECORDING OF TOB DATA IMPOSSIBLE. ***
212 // *** ***
213 // *** PROCEDURE IS FINISHED. ***
214 // **********************************************
215 /
216 <RSET MO:VSN=VSNNR1;
217 /
218 <SETCFOPT:OFF=1&3&&11,ON=2,SCOPE=GLOBAL;
219 <SKIPCMD:LABEL=END;
220 /
221 .AB4 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
222 // ****************
223 // *** FAULT 04 ***
224 // ****************
225 // **********************************************
226 // *** LABELING OF TOB DATA RECORD MO ***
227 // *** (COPY) NOT EXECUTED. ***
228 // *** MOD STATION OFFLINE OR DEFECTIVE OR ***
229 // *** MO DAMAGED: ***
230 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
231 // *** ***
232 // *** START COMMAND FILE CG.SA.RDTOB AGAIN. ***
233 // **********************************************
234 /
235 <SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL;
236 <SKIPCMD:LABEL=END;
237 /
238 .AB5 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
239 // ****************
240 // *** FAULT 05 ***
241 // ****************
242 // **********************************************
243 // *** RECORDING OF TOB DATA (COPY) ***
244 // *** NOT EXECUTED. ***
245 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
246 // *** ***
247 // *** START COMMAND FILE CG.SA.RDTOB AGAIN. ***
248 // **********************************************
249 /
250 <RSET MO:VSN=VSNNR2;

MMN:SW-COFIP-346 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

RDTOB

251 /
252 <SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL;
253 <SKIPCMD:LABEL=END;
254 /
255 .OUT <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
256 /
257 // *******************************
258 // *** FINISHED WITHOUT FAULTS ***
259 // *******************************
260 // *******************************************
261 // *** REMOVE TOB DATA RECORD MO (COPY). ***
262 // *** ***
263 // *** TOB DATA RECORDING IS FINISHED. ***
264 // *******************************************
265 /
266 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
267 <SKIPCMD:LABEL=END;
268 /
269 .END <SETCFOPT:ACKCFS=ERROR,DANCMD=NOEXEC,ACKREQ=NEG,SCOPE=GLOBAL;
270 <ENDFILE;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-347
MMN:SW Maintenance
Software

RDTST

1 <CMDFILE;
2 /
3 // 80-RDTST-01
4 /
5 /****V01***************************************************************
6 /* *
7 /* COMMAND FILE CG.SA.RDTST FOR RECORDING OF TST DATA *
8 /* ================================================== *
9 /* *
10 /* TASK DESCRIPTION: *
11 /* ----------------- *
12 /* - RECORDING OF TRAFFIC STRUCTURE DATA *
13 /* *
14 /* HOLD MO READY/LOADING LOADMOD STATION: *
15 /* ---------------------------------- *
16 /* - A MOD (MAGNETO OPTICAL DISK) WITHOUT WRITE PROTECT *
17 /* IS TO BE HELD READY *
18 /* - BEFORE STARTING THE COMMAND FILE THE MOD STATION *
19 /* IS TO BE LOADED *
20 /* *
21 /* FAULT HANDLING: *
22 /* ----------------- *
23 /* - AFTER INTERRUPTION OF THE FILE PROCESSING VIA FAULT *
24 /* EXITS AND CORRESPONDING FAULT HANDLING THE FILE CAN *
25 /* BE STARTED AGAIN *
26 /* *
27 /* SWITCH PRESETTINGS FOR START POINTS AND ENTRY POINTS: *
28 /* ===================================================== *
29 /* START POINT SWITCH PRESETTINGS *
30 /* ----------- ------------------ *
31 /* RESETCFOPT; *
32 /* *
33 /* ENTRY POINT SWITCH PRESETTINGS *
34 /* ------------ ------------------ *
35 /* M1 SETCFOPT:OFF=1&&11,SCOPE=GLOBAL; *
36 /* M3 SETCFOPT:OFF=1&3&&11,ON=2,SCOPE=GLOBAL; *
37 /* M7 SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL; *
38 /* *
39 /* FAULT 01 SETCFOPT:OFF=1&&11,SCOPE=GLOBAL; *
40 /* FAULT 02,03 SETCFOPT:OFF=1&3&&11,ON=2,SCOPE=GLOBAL; *
41 /* FAULT 04,05 SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL; *
42 /* *
43 /**********************************************************************
44 /
45 <SETCFOPT:ACKCFS=ERROR,DANCMD=EXEC,ACKREQ=POS,SCOPE=GLOBAL;
46 /
47 <SKIPCMD:LABEL=END,ON=1;
48 <SKIPCMD:LABEL=M3,ON=2;
49 <SKIPCMD:LABEL=M7,ON=3;
50 /

MMN:SW-COFIP-348 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

RDTST

51 .M1 <STEP;
52 // ***************************
53 // * DISK SAVING OF TST DATA *
54 // ***************************
55 /
56 <TRANS BUFFER:TYPE=TST;
57 <SKIPCMD:LABEL=AB1,ON=32;
58 /
59 .M2 <STEP;
60 // ***********************************
61 // * DISPLAYING TST DATA FILE STATUS *
62 // ***********************************
63 /
64 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
65 <DISP FILE:FILE=IA.ICTST,ALL;
66 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
67 /
68 .M3 <STEP;
69 // ********************************************
70 // * LABELING TST DATA RECORD MO (ORIGINAL) *
71 // ********************************************
72 /
73 <INIT MO:VSN=VSNNR1,MOD=00,CD=ISO,DENS=6250;
74 <SKIPCMD:LABEL=AB2,ON=32;
75 /
76 .M4 <STEP;
77 // *****************************************
78 // * RECORDING TST DATA (ORIGINAL) STARTED *
79 // *****************************************
80 /
81 <TRANS FILE:VSNR=VSNNR1,FILE=KDEDATA.EWSD/IA.ICTST,COPMOD=POST;
82 <SKIPCMD:LABEL=AB3,ON=32;
83 /
84 <RSET MO:VSN=VSNNR1;
85 /
86 .M5 <STEP;
87 // ***************************************
88 // * RECORDING TST DATA (ORIGINAL) ENDED *
89 // ***************************************
90 /
91 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
92 <DISP FILE:VSN=VSNNR1;
93 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
94 /
95 .M6 <STEP;
96 // *******************************************
97 // * REMOVE TST DATA RECORD MO (ORIGINAL), *
98 // * MOUNT A MO WITHOUT WRITE PROTRCTION *
99 // * FOR RECORDING TST DATA (COPY). *
100 // * *

A30808-X3080-C485-5-7620 MMN:SW-COFIP-349
MMN:SW Maintenance
Software

RDTST

101 // * START COMMAND FILE CG.SA.RDTST AGAIN. *

102 // *******************************************
103 /
104 <SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL;
105 <SKIPCMD:LABEL=END;
106 /
107 .M7 <STEP;
108 // ****************************************
109 // * LABELING TST DATA RECORD MO (COPY) *
110 // ****************************************
111 /
112 <INIT MO:VSN=VSNNR2,MOD=00,CD=ISO,DENS=6250;
113 <SKIPCMD:LABEL=AB4,ON=32;
114 /
115 .M8 <STEP;
116 // *************************************
117 // * RECORDING TST DATA (COPY) STARTED *
118 // *************************************
119 /
120 <TRANS FILE:VSNR=VSNNR2,FILE=KDEDATA.EWSD/IA.ICTST,COPMOD=POST;
121 <SKIPCMD:LABEL=AB5,ON=32;
122 /
123 <RSET MO:VSN=VSNNR2;
124 /
125 .M9 <STEP;
126 // ***********************************
127 // * RECORDING TST DATA (COPY) ENDED *
128 // ***********************************
129 /
130 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
131 <DISP FILE:VSN=VSNNR2;
132 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
133 /
134 .MA <STEP;
135 // ************************************************
136 // * RELEASING RECORDED FILE AREA FOR OVERWRITING *
137 // ************************************************
138 /
139 <REL CYCFILE:FILE=IA.ICTST;
140 /
141 .MB <STEP;
142 // ***********************************
143 // * DISPLAYING TST DATA FILE STATUS *
144 // ***********************************
145 /
146 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
147 <DISP FILE:FILE=IA.ICTST,ALL;
148 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
149 /
150 <SKIPCMD:LABEL=OUT;

MMN:SW-COFIP-350 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

RDTST

151 / *******************************
152 / * FAULT EXITS AND END MESSAGE *
153 / *******************************
154 /
155 .AB1 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
156 <DISP FILE:FILE=IA.ICTST,ALL;
157 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
158 // ****************
159 // *** FAULT 01 ***
160 // ****************
161 // **********************************************
162 // *** DISK SAVING OF TST DATA NOT EXECUTED. ***
163 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
164 // *** ***
165 // *** START COMMAND FILE CG.SA.RDTST AGAIN. ***
166 // **********************************************
167 /
168 <SETCFOPT:OFF=1&&11,SCOPE=GLOBAL;
169 <SKIPCMD:LABEL=END;
170 /
171 .AB2 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
172 // ****************
173 // *** FAULT 02 ***
174 // ****************
175 // **********************************************
176 // *** LABELING OF TST DATA RECORD MO ***
177 // *** (ORIGINAL) NOT EXECUTED. ***
178 // *** MOD STATION OFFLINE OR DEFECTIVE OR ***
179 // *** MO DAMAGED: ***
180 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
181 // *** ***
182 // *** START COMMAND FILE CG.SA.RDTST AGAIN. ***
183 // **********************************************
184 /
185 <SETCFOPT:OFF=1&3&&11,ON=2,SCOPE=GLOBAL;
186 <SKIPCMD:LABEL=END;
187 /
188 .AB3 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
189 // ****************
190 // *** FAULT 03 ***
191 // ****************
192 // **********************************************
193 // *** RECORDING OF TST DATA (ORIGINAL) ***
194 // *** NOT EXECUTED. ***
195 // *** ***
196 // *** CASE 1: ***
197 // *** ======= ***
198 // *** MO DAMAGED OR FILE NOT AVAILABLE, ***
199 // *** CHECK PREREQUISITES, ELIMINATE FAULTS, ***
200 // *** ***

A30808-X3080-C485-5-7620 MMN:SW-COFIP-351
MMN:SW Maintenance
Software

RDTST

201 // *** START COMMAND FILE CG.SA.RDTST AGAIN. ***

202 // *** ***
203 // *** CASE 2: ***
204 // *** ======= ***
205 // *** CORRESPONDING BACKGROUND MEMORY FILE ***
206 // *** IS EMPTY, ***
207 // *** CHECK PREREQUISITES: ***
208 // *** COMMAND TRANS FILE WAS NOT EXECUTED, ***
209 // *** ERROR: L FC 33. ***
210 // *** ***
211 // *** RECORDING OF TST DATA IMPOSSIBLE. ***
212 // *** ***
213 // *** PROCEDURE IS FINISHED. ***
214 // **********************************************
215 /
216 <RSET MO:VSN=VSNNR1;
217 /
218 <SETCFOPT:OFF=1&3&&11,ON=2,SCOPE=GLOBAL;
219 <SKIPCMD:LABEL=END;
220 /
221 .AB4 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
222 // ****************
223 // *** FAULT 04 ***
224 // ****************
225 // **********************************************
226 // *** LABELING OF TST DATA RECORD MO ***
227 // *** (COPY) NOT EXECUTED. ***
228 // *** MOD STATION OFFLINE OR DEFECTIVE OR ***
229 // *** MO DAMAGED: ***
230 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
231 // *** ***
232 // *** START COMMAND FILE CG.SA.RDTST AGAIN. ***
233 // **********************************************
234 /
235 <SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL;
236 <SKIPCMD:LABEL=END;
237 /
238 .AB5 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
239 // ****************
240 // *** FAULT 05 ***
241 // ****************
242 // **********************************************
243 // *** RECORDING OF TST DATA (COPY) ***
244 // *** NOT EXECUTED. ***
245 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
246 // *** ***
247 // *** START COMMAND FILE CG.SA.RDTST AGAIN. ***
248 // **********************************************
249 /
250 <RSET MO:VSN=VSNNR2;

MMN:SW-COFIP-352 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

RDTST

251 /
252 <SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL;
253 <SKIPCMD:LABEL=END;
254 /
255 .OUT <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
256 /
257 // *******************************
258 // *** FINISHED WITHOUT FAULTS ***
259 // *******************************
260 // *******************************************
261 // *** REMOVE TST DATA RECORD MO (COPY). ***
262 // *** ***
263 // *** TST DATA RECORDING IS FINISHED. ***
264 // *******************************************
265 /
266 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
267 <SKIPCMD:LABEL=END;
268 /
269 .END <SETCFOPT:ACKCFS=ERROR,DANCMD=NOEXEC,ACKREQ=NEG,SCOPE=GLOBAL;
270 <ENDFILE;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-353
MMN:SW Maintenance
Software

HADMI

1 <CMDFILE;
2 /
3 // 80-HADMI-01
4 /
5 /****V01***************************************************************
6 /* *
7 /* COMMAND FILE CG.SA.HADMI FOR SAVING HISTORY DATA *
8 /* ================================================ *
9 /* *
10 /* TASK DESCRIPTION *
11 /* ---------------- *
12 /* THIS FILE IS USED IN CASE OF ADMINISTRATION PROBLEMS TO COPY *
13 /* HISTORY FILES FOR FAULT ANALYSIS. *
14 /* *
15 /* THE FOLLOWING FILES ARE SAVED: SG.SESYMP *
16 /* PT.AMTIND *
17 /* AD.RESTART *
18 /* *
19 /* PRESETTINGS: *
20 /* ------------ *
21 /* BEFORE STARTING THE COMMAND FILE THE FML-NUMBER HAS TO BE *
22 /* ANNOUNCED TO THE SYSTEM USING THE FOLLOWING COMMANDS: *
23 /* *
24 /* CR FILE:FILE=CPHIND.FMLNUMXX,TYPE=DOUBLE,SIZE=1; *
25 /* (FMLNUMXX = FML-NUMBER+VERSION COUNTER) *
26 /* *
27 /* FAULT HANDLING: *
28 /* --------------- *
29 /* AFTER INTERRUPTION OF THE FILE PROCESSING VIA FAULT EXITS AND *
30 /* CORRESPONDING FAULT HANDLING THE FILE CAN BE STARTED AGAIN. *
31 /* *
32 /**********************************************************************
33 /
34 <RESET CFOPT;
35 /
36 <SET CFOPT:ACKCFS=ERROR,DANCMD=EXEC,ACKREQ=POS,SCOPE=GLOBAL;
37 /
38 <SET CFOPT:ON=1&7&11,SCOPE=GLOBAL;
39 /
40 <EXEC CMDFILE:FILE=CG.SA.HMAST;
41 /
42 <RESET CFOPT;
43 /
44 <ENDFILE;

MMN:SW-COFIP-354 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

HCCNC

1 <CMDFILE;
2 /
3 // 80-HCCNC-01
4 /
5 /****V01***************************************************************
6 /* *
7 /* COMMAND FILE CG.SA.HCCNC FOR SAVING HISTORY DATA *
8 /* ================================================ *
9 /* *
10 /* TASK DESCRIPTION *
11 /* ---------------- *
12 /* THIS FILE IS USED IN CASE OF CCNC PROBLEMS TO COPY HISTORY *
13 /* FILES FOR FAULT ANALYSIS. *
14 /* *
15 /* THE FOLLOWING FILES ARE SAVED: SG.OPER *
16 /* HF.ARCHIVE *
17 /* HF.MN7.HWERROR *
18 /* PT.AMTIND *
19 /* AD.ZZK *
20 /* *
21 /* PRESETTINGS: *
22 /* ------------ *
23 /* BEFORE STARTING THE COMMAND FILE THE FML-NUMBER HAS TO BE *
24 /* ANNOUNCED TO THE SYSTEM USING THE FOLLOWING COMMANDS: *
25 /* *
26 /* CR FILE:FILE=CPHIND.FMLNUMXX,TYPE=DOUBLE,SIZE=1; *
27 /* (FMLNUMXX = FML-NUMBER+VERSION COUNTER) *
28 /* *
29 /* FAULT HANDLING: *
30 /* --------------- *
31 /* AFTER INTERRUPTION OF THE FILE PROCESSING VIA FAULT EXITS AND *
32 /* CORRESPONDING FAULT HANDLING THE FILE CAN BE STARTED AGAIN. *
33 /* *
34 /**********************************************************************
35 /
36 <RESET CFOPT;
37 /
38 <SET CFOPT:ACKCFS=ERROR,DANCMD=EXEC,ACKREQ=POS,SCOPE=GLOBAL;
39 /
40 <SET CFOPT:ON=2&3&6&9&11,SCOPE=GLOBAL;
41 /
42 <EXEC CMDFILE:FILE=CG.SA.HMAST;
43 /
44 <RESET CFOPT;
45 /
46 <ENDFILE;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-355
MMN:SW Maintenance
Software

HHISD

1 <CMDFILE;
2 /
3 // 80-HHISD-04
4 /
5 /****V02***************************************************************
6 /* *
7 /* COMMAND FILE CG.SA.HHISD FOR SAVING HISTORY DATA *
8 /* ================================================ *
9 /* *
10 /* TASK DESCRIPTION: *
11 /* ----------------- *
12 /* THIS FILE IS USED IN CASE OF OCCUPANCY LEVEL WARNINGS TO COPY *
13 /* HISTORY FILES TO MO. *
14 /* *
15 /* THE FOLLOWING FILES ARE SAVED: HF. - FILES *
16 /* SG. - FILES *
17 /* TM. - FILES *
18 /* DC. - FILES *
19 /* *
20 /* HOLD MO READY/LOADING MOD-STATION: *
21 /* ---------------------------------- *
22 /* AN APPROPRIATE MO IS TO HELD READY FOR SAVING HISTORY FILES *
23 /* *
24 /* BEFORE STARTING THE COMMAND FILE THE MOD STATION IS TO BE LOADED *
25 /* WITH THE MO (MAGNETIC OPTICAL DISK) ANS SWITCHED TO ONLINE. *
26 /* *
27 /* FAULT HANDLING: *
28 /* ----------------- *
29 /* AFTER INTERRUPTION OF THE FILE PROCESSING VIA FAULT EXITS AND *
30 /* CORRESPONDING FAULT HANDLING THE FILE CAN BE STARTED AGAIN. *
31 /* *
32 /* SWITCH PRESETTINGS FOR START POINTS AND ENTRY POINTS: *
33 /* ===================================================== *
34 /* START POINT SWITCH PRESETTINGS *
35 /* ----------- ------------------ *
36 /* RESETCFOPT; *
37 /* *
38 /**********************************************************************
39 /
40 <SETCFOPT:ACKCFS=ERROR,DANCMD=EXEC,ACKREQ=POS,SCOPE=GLOBAL;
41 /
42 <SKIPCMD:LABEL=END,ON=1;
43 /
44 .M1 <STEP;
45 //
46 // ****************************
47 // * LABELING HISTORY FILE MO *
48 // ****************************
49 /
50 <INIT MO:VSN=HISMOD,MOD=00,CD=EBC;

MMN:SW-COFIP-356 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

HHISD

51 <SKIPCMD:LABEL=AB1,ON=32;
52 /
53 .M3 <STEP;
54 /
55 //
56 // ****************************************
57 // * MO SAVING OF FILE HF.ARCHIVE STARTED *
58 // ****************************************
59 /
60 <TRANS FILE:VSNR=HISMOD,FILE=HF.ARCHIVE;
61 <SKIPCMD:LABEL=M32,OFF=32;
62 /
63 .M31 <STEP;
64 /
65 //
66 // ***************************************
67 // * MO SAVING OF FILE HF.ARCHIVE FAULTY *
68 // ***************************************
69 //
70 /
71 <SETCFOPT:ON=4,SCOPE=GLOBAL;
72 <SKIPCMD:LABEL=M4;
73 /
74 .M32 <STEP;
75 /
76 //
77 // *****************************************
78 // * MO SAVING OF FILE HF.ARCHIVE FINISHED *
79 // *****************************************
80 /
81 <RELCYCFILE:FILE=HF.ARCHIVE;
82 /
83 .M4 <STEP;
84 /
85 //
86 // ********************************************
87 // * MO SAVING OF FILE HF.MCP.HWERROR STARTED *
88 // ********************************************
89 /
90 <TRANS FILE:VSNR=HISMOD,FILE=HF.MCP.HWERROR;
91 <SKIPCMD:LABEL=M42,OFF=32;
92 /
93 .M41 <STEP;
94 /
95 //
96 // *******************************************
97 // * MO SAVING OF FILE HF.MCP.HWERROR FAULTY *
98 // *******************************************
99 //
100 /

A30808-X3080-C485-5-7620 MMN:SW-COFIP-357
MMN:SW Maintenance
Software

HHISD

101 <SETCFOPT:ON=4,SCOPE=GLOBAL;
102 <SKIPCMD:LABEL=M5;
103 /
104 .M42 <STEP;
105 /
106 //
107 // *********************************************
108 // * MO SAVING OF FILE HF.MCP.HWERROR FINISHED *
109 // *********************************************
110 /
111 <RELCYCFILE:FILE=HF.MCP.HWERROR;
112 /
113 .M5 <STEP;
114 /
115 //
116 // ***************************************
117 // * MO SAVING OF FILE SG.SESYMP STARTED *
118 // ***************************************
119 /
120 <TRANS FILE:VSNR=HISMOD,FILE=SG.SESYMP;
121 <SKIPCMD:LABEL=M52,OFF=32;
122 /
123 .M51 <STEP;
124 /
125 //
126 // **************************************
127 // * MO SAVING OF FILE SG.SESYMP FAULTY *
128 // **************************************
129 //
130 /
131 <SETCFOPT:ON=4,SCOPE=GLOBAL;
132 <SKIPCMD:LABEL=M6;
133 /
134 .M52 <STEP;
135 /
136 //
137 // ****************************************
138 // * MO SAVING OF FILE SG.SESYMP FINISHED *
139 // ****************************************
140 /
141 <RELCYCFILE:FILE=SG.SESYMP;
142 /
143 .M6 <STEP;
144 /
145 //
146 // *************************************
147 // * MO SAVING OF FILE SG.BX25 STARTED *
148 // *************************************
149 /
150 <TRANS FILE:VSNR=HISMOD,FILE=SG.BX25;

MMN:SW-COFIP-358 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

HHISD

151 <SKIPCMD:LABEL=M62,OFF=32;
152 /
153 .M61 <STEP;
154 /
155 //
156 // ************************************
157 // * MO SAVING OF FILE SG.BX25 FAULTY *
158 // ************************************
159 //
160 /
161 <SETCFOPT:ON=4,SCOPE=GLOBAL;
162 <SKIPCMD:LABEL=M7;
163 /
164 .M62 <STEP;
165 /
166 //
167 // **************************************
168 // * MO SAVING OF FILE SG.BX25 FINISHED *
169 // **************************************
170 /
171 <RELCYCFILE:FILE=SG.BX25;
172 /
173 .M7 <STEP;
174 /
175 //
176 // *************************************
177 // * MO SAVING OF FILE SG.OPER STARTED *
178 // *************************************
179 /
180 <TRANS FILE:VSNR=HISMOD,FILE=SG.OPER;
181 <SKIPCMD:LABEL=M72,OFF=32;
182 /
183 .M71 <STEP;
184 /
185 //
186 // ************************************
187 // * MO SAVING OF FILE SG.OPER FAULTY *
188 // ************************************
189 //
190 /
191 <SETCFOPT:ON=4,SCOPE=GLOBAL;
192 <SKIPCMD:LABEL=M8;
193 /
194 .M72 <STEP;
195 /
196 //
197 // **************************************
198 // * MO SAVING OF FILE SG.OPER FINISHED *
199 // **************************************
200 /

A30808-X3080-C485-5-7620 MMN:SW-COFIP-359
MMN:SW Maintenance
Software

HHISD

201 <RELCYCFILE:FILE=SG.OPER;
202 /
203 .M8 <STEP;
204 /
205 //
206 // ****************************************
207 // * MO SAVING OF FILE TM.MNT.PCM STARTED *
208 // ****************************************
209 /
210 <TRANS FILE:VSNR=HISMOD,FILE=TM.MNT.PCM;
211 <SKIPCMD:LABEL=M82,OFF=32;
212 /
213 .M81 <STEP;
214 /
215 //
216 // ***************************************
217 // * MO SAVING OF FILE TM.MNT.PCM FAULTY *
218 // ***************************************
219 //
220 /
221 <SETCFOPT:ON=4,SCOPE=GLOBAL;
222 <SKIPCMD:LABEL=M9;
223 /
224 .M82 <STEP;
225 /
226 //
227 // *****************************************
228 // * MO SAVING OF FILE TM.MNT.PCM FINISHED *
229 // *****************************************
230 /
231 <RELCYCFILE:FILE=TM.MNT.PCM;
232 /
233 .M9 <STEP;
234 /
235 //
236 // ********************************************
237 // * MO SAVING OF FILE TM.PCM.AL.STAT STARTED *
238 // ********************************************
239 /
240 <TRANS FILE:VSNR=HISMOD,FILE=TM.PCM.AL.STAT;
241 <SKIPCMD:LABEL=M92,OFF=32;
242 /
243 .M91 <STEP;
244 /
245 //
246 // *******************************************
247 // * MO SAVING OF FILE TM.PCM.AL.STAT FAULTY *
248 // *******************************************
249 //
250 /

MMN:SW-COFIP-360 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

HHISD

251 <SETCFOPT:ON=4,SCOPE=GLOBAL;
252 <SKIPCMD:LABEL=M10;
253 /
254 .M92 <STEP;
255 /
256 //
257 // *********************************************
258 // * MO SAVING OF FILE TM.PCM.AL.STAT FINISHED *
259 // *********************************************
260 /
261 <RELCYCFILE:FILE=TM.PCM.AL.STAT;
262 /
263 .M10 <STEP;
264 /
265 //
266 // *****************************************
267 // * MO SAVING OF FILE TM.MNT.PORT STARTED *
268 // *****************************************
269 /
270 <TRANS FILE:VSNR=HISMOD,FILE=TM.MNT.PORT;
271 <SKIPCMD:LABEL=M102,OFF=32;
272 /
273 .M101 <STEP;
274 /
275 //
276 // ****************************************
277 // * MO SAVING OF FILE TM.MNT.PORT FAULTY *
278 // ****************************************
279 //
280 /
281 <SETCFOPT:ON=4,SCOPE=GLOBAL;
282 <SKIPCMD:LABEL=N1;
283 /
284 .M102 <STEP;
285 /
286 //
287 // ******************************************
288 // * MO SAVING OF FILE TM.MNT.PORT FINISHED *
289 // ******************************************
290 /
291 <RELCYCFILE:FILE=TM.MNT.PORT;
292 /
293 .N1 <STEP;
294 /
295 //
296 // **********************************************
297 // * MO SAVING OF DATA COLLECTION FILES STARTED *
298 // **********************************************
299 /
300 <DISPFILE:FILE=DC.;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-361
MMN:SW Maintenance
Software

HHISD

301 <SKIPCMD:LABEL=V0,OFF=32;
302 /
303 // *************************************
304 // ** THERE ARE NO DC.-FILES EXISTING **
305 // *************************************
306 /
307 <SKIPCMD:LABEL=N3;
308 /
309 .V0 <STEP;
310 <DISPFILE:FILE=DC.V00;
311 <SKIPCMD:LABEL=V1,ON=32;
312 <CRAFILE:AFILE=DD.V00,SIZE=800,TYPE=SINGLE;
313 <DMPSFGSYMP:FILE=DC.V00;
314 <TRANSFILE:FILE=DD.V00,COPMOD=POST,VSNR=HISMOD;
315 <SKIPCMD:LABEL=V01,ON=32;
316 <CANAFILE:AFILE=DD.V00;
317 <DELFILE:FILE=DC.V00;
318 <SKIPCMD:LABEL=V1;
319 /
320 .V01 <STEP;
321 <SETCFOPT:ON=4,SCOPE=GLOBAL;
322 /
323 .V1 <STEP;
324 <DISPFILE:FILE=DC.V01;
325 <SKIPCMD:LABEL=V2,ON=32;
326 <CRAFILE:AFILE=DD.V01,SIZE=800,TYPE=SINGLE;
327 <DMPSFGSYMP:FILE=DC.V01;
328 <TRANSFILE:FILE=DD.V01,COPMOD=POST,VSNR=HISMOD;
329 <SKIPCMD:LABEL=V11,ON=32;
330 <CANAFILE:AFILE=DD.V01;
331 <DELFILE:FILE=DC.V01;
332 <SKIPCMD:LABEL=V2;
333 /
334 .V11 <STEP;
335 <SETCFOPT:ON=4,SCOPE=GLOBAL;
336 /
337 .V2 <STEP;
338 <DISPFILE:FILE=DC.V02;
339 <SKIPCMD:LABEL=V3,ON=32;
340 <CRAFILE:AFILE=DD.V02,SIZE=800,TYPE=SINGLE;
341 <DMPSFGSYMP:FILE=DC.V02;
342 <TRANSFILE:FILE=DD.V02,COPMOD=POST,VSNR=HISMOD;
343 <SKIPCMD:LABEL=V21,ON=32;
344 <CANAFILE:AFILE=DD.V02;
345 <DELFILE:FILE=DC.V02;
346 <SKIPCMD:LABEL=V3;
347 /
348 .V21 <STEP;
349 <SETCFOPT:ON=4,SCOPE=GLOBAL;
350 /

MMN:SW-COFIP-362 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

HHISD

351 .V3 <STEP;

352 <DISPFILE:FILE=DC.V03;
353 <SKIPCMD:LABEL=V4,ON=32;
354 <CRAFILE:AFILE=DD.V03,SIZE=800,TYPE=SINGLE;
355 <DMPSFGSYMP:FILE=DC.V03;
356 <TRANSFILE:FILE=DD.V03,COPMOD=POST,VSNR=HISMOD;
357 <SKIPCMD:LABEL=V31,ON=32;
358 <CANAFILE:AFILE=DD.V03;
359 <DELFILE:FILE=DC.V03;
360 <SKIPCMD:LABEL=V4;
361 /
362 .V31 <STEP;
363 <SETCFOPT:ON=4,SCOPE=GLOBAL;
364 /
365 .V4 <STEP;
366 <DISPFILE:FILE=DC.V04;
367 <SKIPCMD:LABEL=V5,ON=32;
368 <CRAFILE:AFILE=DD.V04,SIZE=800,TYPE=SINGLE;
369 <DMPSFGSYMP:FILE=DC.V04;
370 <TRANSFILE:FILE=DD.V04,COPMOD=POST,VSNR=HISMOD;
371 <SKIPCMD:LABEL=V41,ON=32;
372 <CANAFILE:AFILE=DD.V04;
373 <DELFILE:FILE=DC.V04;
374 <SKIPCMD:LABEL=V5;
375 /
376 .V41 <STEP;
377 <SETCFOPT:ON=4,SCOPE=GLOBAL;
378 /
379 .V5 <STEP;
380 <DISPFILE:FILE=DC.V05;
381 <SKIPCMD:LABEL=V6,ON=32;
382 <CRAFILE:AFILE=DD.V05,SIZE=800,TYPE=SINGLE;
383 <DMPSFGSYMP:FILE=DC.V05;
384 <TRANSFILE:FILE=DD.V05,COPMOD=POST,VSNR=HISMOD;
385 <SKIPCMD:LABEL=V51,ON=32;
386 <CANAFILE:AFILE=DD.V05;
387 <DELFILE:FILE=DC.V05;
388 <SKIPCMD:LABEL=V6;
389 /
390 .V51 <STEP;
391 <SETCFOPT:ON=4,SCOPE=GLOBAL;
392 /
393 .V6 <STEP;
394 <DISPFILE:FILE=DC.V06;
395 <SKIPCMD:LABEL=V7,ON=32;
396 <CRAFILE:AFILE=DD.V06,SIZE=800,TYPE=SINGLE;
397 <DMPSFGSYMP:FILE=DC.V06;
398 <TRANSFILE:FILE=DD.V06,COPMOD=POST,VSNR=HISMOD;
399 <SKIPCMD:LABEL=V61,ON=32;
400 <CANAFILE:AFILE=DD.V06;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-363
MMN:SW Maintenance
Software

HHISD

401 <DELFILE:FILE=DC.V06;
402 <SKIPCMD:LABEL=V7;
403 /
404 .V61 <STEP;
405 <SETCFOPT:ON=4,SCOPE=GLOBAL;
406 /
407 .V7 <STEP;
408 <DISPFILE:FILE=DC.V07;
409 <SKIPCMD:LABEL=V8,ON=32;
410 <CRAFILE:AFILE=DD.V07,SIZE=800,TYPE=SINGLE;
411 <DMPSFGSYMP:FILE=DC.V07;
412 <TRANSFILE:FILE=DD.V07,COPMOD=POST,VSNR=HISMOD;
413 <SKIPCMD:LABEL=V71,ON=32;
414 <CANAFILE:AFILE=DD.V07;
415 <DELFILE:FILE=DC.V07;
416 <SKIPCMD:LABEL=V8;
417 /
418 .V71 <STEP;
419 <SETCFOPT:ON=4,SCOPE=GLOBAL;
420 /
421 .V8 <STEP;
422 <DISPFILE:FILE=DC.B00;
423 <SKIPCMD:LABEL=V9,ON=32;
424 <CRAFILE:AFILE=DD.B00,SIZE=800,TYPE=SINGLE;
425 <DMPSFGSYMP:FILE=DC.B00;
426 <TRANSFILE:FILE=DD.B00,COPMOD=POST,VSNR=HISMOD;
427 <SKIPCMD:LABEL=V81,ON=32;
428 <CANAFILE:AFILE=DD.B00;
429 <DELFILE:FILE=DC.B00;
430 <SKIPCMD:LABEL=V9;
431 /
432 .V81 <STEP;
433 <SETCFOPT:ON=4,SCOPE=GLOBAL;
434 /
435 .V9 <STEP;
436 <DISPFILE:FILE=DC.B01;
437 <SKIPCMD:LABEL=BX25,ON=32;
438 <CRAFILE:AFILE=DD.B01,SIZE=800,TYPE=SINGLE;
439 <DMPSFGSYMP:FILE=DC.B01;
440 <TRANSFILE:FILE=DD.B01,COPMOD=POST,VSNR=HISMOD;
441 <SKIPCMD:LABEL=V91,ON=32;
442 <CANAFILE:AFILE=DD.B01;
443 <SKIPCMD:LABEL=N2;
444 /
445 .V91 <STEP;
446 <SETCFOPT:ON=4,SCOPE=GLOBAL;
447 <DELFILE:FILE=DC.B01;
448 /
449 .N2 <STEP;
450 /

MMN:SW-COFIP-364 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

HHISD

451 //
452 // ***********************************************
453 // * MO SAVING OF DATA COLLECTION FILES FINISHED *
454 // ***********************************************
455 /
456 /
457 .N3 <STEP;
458 <RSET MO:VSN=HISMOD;
459 //
460 // ************************************
461 // * LISTING HISTORY FILE MO CONTENTS *
462 // ************************************
463 /
464 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
465 <DISP FILE:VSN=HISMOD;
466 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
467 /
468 <SKIPCMD:LABEL=OUT1,ON=4;
469 <SKIPCMD:LABEL=OUT;
470 /
471 / *******************************
472 / * FAULT EXITS AND END MESSAGE *
473 / *******************************
474 /
475 .AB1 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
476 //
477 // ****************
478 // *** FAULT 01 ***
479 // ****************
480 // ***************************************************
481 // *** LABELING HISTORY FILE MO ***
482 // *** NOT EXECUTED. ***
483 // *** MO IS DAMAGED OR FILES ARE NOT AVAILABLE: ***
484 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
485 // *** ***
486 // *** START COMMAND FILE CG.SA.HHISD AGAIN. ***
487 // ***************************************************
488 /
489 <SKIPCMD:LABEL=END;
490 /
491 .OUT <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
492 /
493 // *******************************
494 // *** FINISHED WITHOUT FAULTS ***
495 // *******************************
496 // ****************************************
497 // *** REMOVE HISTORY SAVE MO ***
498 // *** HISTORY FILE SAVING IS FINISHED. ***
499 // ****************************************
500 /

A30808-X3080-C485-5-7620 MMN:SW-COFIP-365
MMN:SW Maintenance
Software

HHISD

501 <RSET MO:VSN=HISMOD;

502 /
503 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
504 <SKIPCMD:LABEL=END;
505 /
506 .OUT1 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
507 /
508 // ****************************
509 // *** FINISHED WITH FAULTS ***
510 // ****************************
511 // ***************************************************
512 // *** MO SAVING OF ALL HISTORY FILES THAT ***
513 // *** ARE NOT EMPTY HAS BEEN COMPLETED. ***
514 // *** ***
515 // *** HOWEVER, NOT ALL HISTORY FILES COULD BE ***
516 // *** TRANSFERRED. ***
517 // *** ***
518 // *** CASE 1: ***
519 // *** ======= ***
520 // *** MO IS DAMAGED OR FILES ARE NOT AVAILABLE: ***
521 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
522 // *** ***
523 // *** START COMMAND FILE CG.SA.HHISD AGAIN. ***
524 // *** ***
525 // *** CASE 2: ***
526 // *** ======= ***
527 // *** THE FILES THAT WERE NOT TRANSFERRED ARE ***
528 // *** EMPTY (FAULT L FC 33). ***
529 // *** THERE IS NO FAULT. ***
530 // *** ***
531 // *** HISTORY FILE SAVING IS FINISHED. ***
532 // ***************************************************
533 /
534 <RSET MO:VSN=HISMOD;
535 /
536 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
537 <SKIPCMD:LABEL=END;
538 /
539 .END <SETCFOPT:ACKCFS=ERROR,DANCMD=NOEXEC,ACKREQ=NEG,SCOPE=GLOBAL;
540 <ENDFILE;

MMN:SW-COFIP-366 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

HHIST

1 <CMDFILE;
2 /
3 // 80-HHIST-04
4 /
5 /****V02***************************************************************
6 /* *
7 /* COMMAND FILE CG.SA.HHIST FOR SAVING HISTORY DATA *
8 /* ================================================ *
9 /* *
10 /* TASK DESCRIPTION: *
11 /* ----------------- *
12 /* THIS FILE IS USED IN CASE OF OCCUPANCY LEVEL WARNINGS TO COPY *
13 /* HISTORY FILES TO SAVE TAPE. *
14 /* *
15 /* THE FOLLOWING FILES ARE SAVED: HF. - FILES *
16 /* SG. - FILES *
17 /* TM. - FILES *
18 /* DC. - FILES *
19 /* *
20 /* HOLD TAPE READY/LOADING MAGNETIC TAPE DEVICE: *
21 /* --------------------------------------------- *
22 /* AN APPROPRIATE TAPE WITH WRITE RING IS TO BE HELD READY FOR *
23 /* SAVING HISTORY FILES *
24 /* *
25 /* BEFORE STARTING THE COMMAND FILE THE MAGNETIC TAPE DEVICE IS TO *
26 /* BE LOADED AND SWITCHED TO ONLINE *
27 /* *
28 /* FAULT HANDLING: *
29 /* ----------------- *
30 /* AFTER INTERRUPTION OF THE FILE PROCESSING VIA FAULT EXITS AND *
31 /* CORRESPONDING FAULT HANDLING THE FILE CAN BE STARTED AGAIN. *
32 /* *
33 /* SWITCH PRESETTINGS FOR START POINTS AND ENTRY POINTS: *
34 /* ===================================================== *
35 /* START POINT SWITCH PRESETTINGS *
36 /* ----------- ------------------ *
37 /* RESETCFOPT; *
38 /* *
39 /**********************************************************************
40 /
41 <SETCFOPT:ACKCFS=ERROR,DANCMD=EXEC,ACKREQ=POS,SCOPE=GLOBAL;
42 /
43 <SKIPCMD:LABEL=END,ON=1;
44 /
45 .M1 <STEP;
46 //
47 // ***********************************
48 // * LABELING HISTORY FILE SAVE TAPE *
49 // ***********************************
50 /

A30808-X3080-C485-5-7620 MMN:SW-COFIP-367
MMN:SW Maintenance
Software

HHIST

51 <INIT MT:VSN=HISTAP,MTD=00,CD=EBC,DENS=6250;
52 <SKIPCMD:LABEL=AB1,ON=32;
53 /
54 .M3 <STEP;
55 /
56 //
57 // ******************************************
58 // * TAPE SAVING OF FILE HF.ARCHIVE STARTED *
59 // ******************************************
60 /
61 <TRANS FILE:VSNR=HISTAP,FILE=HF.ARCHIVE;
62 <SKIPCMD:LABEL=M32,OFF=32;
63 /
64 .M31 <STEP;
65 /
66 //
67 // *****************************************
68 // * TAPE SAVING OF FILE HF.ARCHIVE FAULTY *
69 // *****************************************
70 //
71 /
72 <SETCFOPT:ON=4,SCOPE=GLOBAL;
73 <SKIPCMD:LABEL=M4;
74 /
75 .M32 <STEP;
76 /
77 //
78 // *******************************************
79 // * TAPE SAVING OF FILE HF.ARCHIVE FINISHED *
80 // *******************************************
81 /
82 <RELCYCFILE:FILE=HF.ARCHIVE;
83 /
84 .M4 <STEP;
85 /
86 //
87 // **********************************************
88 // * TAPE SAVING OF FILE HF.MCP.HWERROR STARTED *
89 // **********************************************
90 /
91 <TRANS FILE:VSNR=HISTAP,FILE=HF.MCP.HWERROR;
92 <SKIPCMD:LABEL=M42,OFF=32;
93 /
94 .M41 <STEP;
95 /
96 //
97 // *********************************************
98 // * TAPE SAVING OF FILE HF.MCP.HWERROR FAULTY *
99 // *********************************************
100 //

MMN:SW-COFIP-368 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

HHIST

101 /
102 <SETCFOPT:ON=4,SCOPE=GLOBAL;
103 <SKIPCMD:LABEL=M5;
104 /
105 .M42 <STEP;
106 /
107 //
108 // ***********************************************
109 // * TAPE SAVING OF FILE HF.MCP.HWERROR FINISHED *
110 // ***********************************************
111 /
112 <RELCYCFILE:FILE=HF.MCP.HWERROR;
113 /
114 .M5 <STEP;
115 /
116 //
117 // *****************************************
118 // * TAPE SAVING OF FILE SG.SESYMP STARTED *
119 // *****************************************
120 /
121 <TRANS FILE:VSNR=HISTAP,FILE=SG.SESYMP;
122 <SKIPCMD:LABEL=M52,OFF=32;
123 /
124 .M51 <STEP;
125 /
126 //
127 // ****************************************
128 // * TAPE SAVING OF FILE SG.SESYMP FAULTY *
129 // ****************************************
130 //
131 /
132 <SETCFOPT:ON=4,SCOPE=GLOBAL;
133 <SKIPCMD:LABEL=M6;
134 /
135 .M52 <STEP;
136 /
137 //
138 // ******************************************
139 // * TAPE SAVING OF FILE SG.SESYMP FINISHED *
140 // ******************************************
141 /
142 <RELCYCFILE:FILE=SG.SESYMP;
143 /
144 .M6 <STEP;
145 /
146 //
147 // ***************************************
148 // * TAPE SAVING OF FILE SG.BX25 STARTED *
149 // ***************************************
150 /

A30808-X3080-C485-5-7620 MMN:SW-COFIP-369
MMN:SW Maintenance
Software

HHIST

151 <TRANS FILE:VSNR=HISTAP,FILE=SG.BX25;

152 <SKIPCMD:LABEL=M62,OFF=32;
153 /
154 .M61 <STEP;
155 /
156 //
157 // **************************************
158 // * TAPE SAVING OF FILE SG.BX25 FAULTY *
159 // **************************************
160 //
161 /
162 <SETCFOPT:ON=4,SCOPE=GLOBAL;
163 <SKIPCMD:LABEL=M7;
164 /
165 .M62 <STEP;
166 /
167 //
168 // ****************************************
169 // * TAPE SAVING OF FILE SG.BX25 FINISHED *
170 // ****************************************
171 /
172 <RELCYCFILE:FILE=SG.BX25;
173 /
174 .M7 <STEP;
175 /
176 //
177 // ***************************************
178 // * TAPE SAVING OF FILE SG.OPER STARTED *
179 // ***************************************
180 /
181 <TRANS FILE:VSNR=HISTAP,FILE=SG.OPER;
182 <SKIPCMD:LABEL=M72,OFF=32;
183 /
184 .M71 <STEP;
185 /
186 //
187 // **************************************
188 // * TAPE SAVING OF FILE SG.OPER FAULTY *
189 // **************************************
190 //
191 /
192 <SETCFOPT:ON=4,SCOPE=GLOBAL;
193 <SKIPCMD:LABEL=M8;
194 /
195 .M72 <STEP;
196 /
197 //
198 // ****************************************
199 // * TAPE SAVING OF FILE SG.OPER FINISHED *
200 // ****************************************

MMN:SW-COFIP-370 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

HHIST

201 /
202 <RELCYCFILE:FILE=SG.OPER;
203 /
204 .M8 <STEP;
205 /
206 //
207 // ******************************************
208 // * TAPE SAVING OF FILE TM.MNT.PCM STARTED *
209 // ******************************************
210 /
211 <TRANS FILE:VSNR=HISTAP,FILE=TM.MNT.PCM;
212 <SKIPCMD:LABEL=M82,OFF=32;
213 /
214 .M81 <STEP;
215 /
216 //
217 // *****************************************
218 // * TAPE SAVING OF FILE TM.MNT.PCM FAULTY *
219 // *****************************************
220 //
221 /
222 <SETCFOPT:ON=4,SCOPE=GLOBAL;
223 <SKIPCMD:LABEL=M9;
224 /
225 .M82 <STEP;
226 /
227 //
228 // *******************************************
229 // * TAPE SAVING OF FILE TM.MNT.PCM FINISHED *
230 // *******************************************
231 /
232 <RELCYCFILE:FILE=TM.MNT.PCM;
233 /
234 .M9 <STEP;
235 /
236 //
237 // **********************************************
238 // * TAPE SAVING OF FILE TM.PCM.AL.STAT STARTED *
239 // **********************************************
240 /
241 <TRANS FILE:VSNR=HISTAP,FILE=TM.PCM.AL.STAT;
242 <SKIPCMD:LABEL=M92,OFF=32;
243 /
244 .M91 <STEP;
245 /
246 //
247 // *********************************************
248 // * TAPE SAVING OF FILE TM.PCM.AL.STAT FAULTY *
249 // *********************************************
250 //

A30808-X3080-C485-5-7620 MMN:SW-COFIP-371
MMN:SW Maintenance
Software

HHIST

251 /
252 <SETCFOPT:ON=4,SCOPE=GLOBAL;
253 <SKIPCMD:LABEL=M10;
254 /
255 .M92 <STEP;
256 /
257 //
258 // ***********************************************
259 // * TAPE SAVING OF FILE TM.PCM.AL.STAT FINISHED *
260 // ***********************************************
261 /
262 <RELCYCFILE:FILE=TM.PCM.AL.STAT;
263 /
264 .M10 <STEP;
265 /
266 //
267 // *******************************************
268 // * TAPE SAVING OF FILE TM.MNT.PORT STARTED *
269 // *******************************************
270 /
271 <TRANS FILE:VSNR=HISMOD,FILE=TM.MNT.PORT;
272 <SKIPCMD:LABEL=M102,OFF=32;
273 /
274 .M101 <STEP;
275 /
276 //
277 // ******************************************
278 // * TAPE SAVING OF FILE TM.MNT.PORT FAULTY *
279 // ******************************************
280 //
281 /
282 <SETCFOPT:ON=4,SCOPE=GLOBAL;
283 <SKIPCMD:LABEL=N1;
284 /
285 .M102 <STEP;
286 /
287 //
288 // ********************************************
289 // * TAPE SAVING OF FILE TM.MNT.PORT FINISHED *
290 // ********************************************
291 /
292 <RELCYCFILE:FILE=TM.MNT.PORT;
293 /
294 .N1 <STEP;
295 /
296 //
297 // ************************************************
298 // * TAPE SAVING OF DATA COLLECTION FILES STARTED *
299 // ************************************************
300 /

MMN:SW-COFIP-372 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

HHIST

301 <DISPFILE:FILE=DC.;
302 <SKIPCMD:LABEL=V0,OFF=32;
303 /
304 // *************************************
305 // ** THERE ARE NO DC.-FILES EXISTING **
306 // *************************************
307 /
308 <SKIPCMD:LABEL=N3;
309 /
310 .V0 <STEP;
311 <DISPFILE:FILE=DC.V00;
312 <SKIPCMD:LABEL=V1,ON=32;
313 <CRAFILE:AFILE=DD.V00,SIZE=800,TYPE=SINGLE;
314 <DMPSFGSYMP:FILE=DC.V00;
315 <TRANSFILE:FILE=DD.V00,COPMOD=POST,VSNR=HISTAP;
316 <SKIPCMD:LABEL=V01,ON=32;
317 <CANAFILE:AFILE=DD.V00;
318 <DELFILE:FILE=DC.V00;
319 <SKIPCMD:LABEL=V1;
320 /
321 .V01 <STEP;
322 <SETCFOPT:ON=4,SCOPE=GLOBAL;
323 /
324 .V1 <STEP;
325 <DISPFILE:FILE=DC.V01;
326 <SKIPCMD:LABEL=V2,ON=32;
327 <CRAFILE:AFILE=DD.V01,SIZE=800,TYPE=SINGLE;
328 <DMPSFGSYMP:FILE=DC.V01;
329 <TRANSFILE:FILE=DD.V01,COPMOD=POST,VSNR=HISTAP;
330 <SKIPCMD:LABEL=V11,ON=32;
331 <CANAFILE:AFILE=DD.V01;
332 <DELFILE:FILE=DC.V01;
333 <SKIPCMD:LABEL=V2;
334 /
335 .V11 <STEP;
336 <SETCFOPT:ON=4,SCOPE=GLOBAL;
337 /
338 .V2 <STEP;
339 <DISPFILE:FILE=DC.V02;
340 <SKIPCMD:LABEL=V3,ON=32;
341 <CRAFILE:AFILE=DD.V02,SIZE=800,TYPE=SINGLE;
342 <DMPSFGSYMP:FILE=DC.V02;
343 <TRANSFILE:FILE=DD.V02,COPMOD=POST,VSNR=HISTAP;
344 <SKIPCMD:LABEL=V21,ON=32;
345 <CANAFILE:AFILE=DD.V02;
346 <DELFILE:FILE=DC.V02;
347 <SKIPCMD:LABEL=V3;
348 /
349 .V21 <STEP;
350 <SETCFOPT:ON=4,SCOPE=GLOBAL;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-373
MMN:SW Maintenance
Software

HHIST

351 /
352 .V3 <STEP;
353 <DISPFILE:FILE=DC.V03;
354 <SKIPCMD:LABEL=V4,ON=32;
355 <CRAFILE:AFILE=DD.V03,SIZE=800,TYPE=SINGLE;
356 <DMPSFGSYMP:FILE=DC.V03;
357 <TRANSFILE:FILE=DD.V03,COPMOD=POST,VSNR=HISTAP;
358 <SKIPCMD:LABEL=V31,ON=32;
359 <CANAFILE:AFILE=DD.V03;
360 <DELFILE:FILE=DC.V03;
361 <SKIPCMD:LABEL=V4;
362 /
363 .V31 <STEP;
364 <SETCFOPT:ON=4,SCOPE=GLOBAL;
365 /
366 .V4 <STEP;
367 <DISPFILE:FILE=DC.V04;
368 <SKIPCMD:LABEL=V5,ON=32;
369 <CRAFILE:AFILE=DD.V04,SIZE=800,TYPE=SINGLE;
370 <DMPSFGSYMP:FILE=DC.V04;
371 <TRANSFILE:FILE=DD.V04,COPMOD=POST,VSNR=HISTAP;
372 <SKIPCMD:LABEL=V41,ON=32;
373 <CANAFILE:AFILE=DD.V04;
374 <DELFILE:FILE=DC.V04;
375 <SKIPCMD:LABEL=V5;
376 /
377 .V41 <STEP;
378 <SETCFOPT:ON=4,SCOPE=GLOBAL;
379 /
380 .V5 <STEP;
381 <DISPFILE:FILE=DC.V05;
382 <SKIPCMD:LABEL=V6,ON=32;
383 <CRAFILE:AFILE=DD.V05,SIZE=800,TYPE=SINGLE;
384 <DMPSFGSYMP:FILE=DC.V05;
385 <TRANSFILE:FILE=DD.V05,COPMOD=POST,VSNR=HISTAP;
386 <SKIPCMD:LABEL=V51,ON=32;
387 <CANAFILE:AFILE=DD.V05;
388 <DELFILE:FILE=DC.V05;
389 <SKIPCMD:LABEL=V6;
390 /
391 .V51 <STEP;
392 <SETCFOPT:ON=4,SCOPE=GLOBAL;
393 /
394 .V6 <STEP;
395 <DISPFILE:FILE=DC.V06;
396 <SKIPCMD:LABEL=V7,ON=32;
397 <CRAFILE:AFILE=DD.V06,SIZE=800,TYPE=SINGLE;
398 <DMPSFGSYMP:FILE=DC.V06;
399 <TRANSFILE:FILE=DD.V06,COPMOD=POST,VSNR=HISTAP;
400 <SKIPCMD:LABEL=V61,ON=32;

MMN:SW-COFIP-374 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

HHIST

401 <CANAFILE:AFILE=DD.V06;
402 <DELFILE:FILE=DC.V06;
403 <SKIPCMD:LABEL=V7;
404 /
405 .V61 <STEP;
406 <SETCFOPT:ON=4,SCOPE=GLOBAL;
407 /
408 .V7 <STEP;
409 <DISPFILE:FILE=DC.V07;
410 <SKIPCMD:LABEL=V8,ON=32;
411 <CRAFILE:AFILE=DD.V07,SIZE=800,TYPE=SINGLE;
412 <DMPSFGSYMP:FILE=DC.V07;
413 <TRANSFILE:FILE=DD.V07,COPMOD=POST,VSNR=HISTAP;
414 <SKIPCMD:LABEL=V71,ON=32;
415 <CANAFILE:AFILE=DD.V07;
416 <DELFILE:FILE=DC.V07;
417 <SKIPCMD:LABEL=V8;
418 /
419 .V71 <STEP;
420 <SETCFOPT:ON=4,SCOPE=GLOBAL;
421 /
422 .V8 <STEP;
423 <DISPFILE:FILE=DC.B00;
424 <SKIPCMD:LABEL=V9,ON=32;
425 <CRAFILE:AFILE=DD.B00,SIZE=800,TYPE=SINGLE;
426 <DMPSFGSYMP:FILE=DC.B00;
427 <TRANSFILE:FILE=DD.B00,COPMOD=POST,VSNR=HISTAP;
428 <SKIPCMD:LABEL=V81,ON=32;
429 <CANAFILE:AFILE=DD.B00;
430 <DELFILE:FILE=DC.B00;
431 <SKIPCMD:LABEL=V9;
432 /
433 .V81 <STEP;
434 <SETCFOPT:ON=4,SCOPE=GLOBAL;
435 /
436 .V9 <STEP;
437 <DISPFILE:FILE=DC.B01;
438 <SKIPCMD:LABEL=BX25,ON=32;
439 <CRAFILE:AFILE=DD.B01,SIZE=800,TYPE=SINGLE;
440 <DMPSFGSYMP:FILE=DC.B01;
441 <TRANSFILE:FILE=DD.B01,COPMOD=POST,VSNR=HISTAP;
442 <SKIPCMD:LABEL=V91,ON=32;
443 <CANAFILE:AFILE=DD.B01;
444 <SKIPCMD:LABEL=N2;
445 /
446 .V91 <STEP;
447 <SETCFOPT:ON=4,SCOPE=GLOBAL;
448 <DELFILE:FILE=DC.B01;
449 /
450 .N2 <STEP;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-375
MMN:SW Maintenance
Software

HHIST

451 /
452 //
453 // *************************************************
454 // * TAPE SAVING OF DATA COLLECTION FILES FINISHED *
455 // *************************************************
456 /
457 /
458 .N3 <STEP;
459 <REWIND MT:VSN=HISTAP;
460 //
461 // *******************************************
462 // * LISTING HISTORY FILE SAVE TAPE CONTENTS *
463 // *******************************************
464 /
465 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
466 <DISP FILE:VSN=HISTAP;
467 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
468 /
469 <SKIPCMD:LABEL=OUT1,ON=4;
470 <SKIPCMD:LABEL=OUT;
471 /
472 / *******************************
473 / * FAULT EXITS AND END MESSAGE *
474 / *******************************
475 /
476 .AB1 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
477 //
478 // ****************
479 // *** FAULT 01 ***
480 // ****************
481 // ***************************************************
482 // *** LABELING HISTORY FILE SAVE TAPE ***
483 // *** NOT EXECUTED. ***
484 // *** TAPE IS DAMAGED OR FILES ARE NOT AVAILABLE: ***
485 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
486 // *** ***
487 // *** START COMMAND FILE CG.SA.HHIST AGAIN. ***
488 // ***************************************************
489 /
490 <SKIPCMD:LABEL=END;
491 /
492 .OUT <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
493 /
494 // *******************************
495 // *** FINISHED WITHOUT FAULTS ***
496 // *******************************
497 // ****************************************
498 // *** REMOVE HISTORY SAVE TAPE ***
499 // *** HISTORY FILE SAVING IS FINISHED. ***
500 // ****************************************

MMN:SW-COFIP-376 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

HHIST

501 /
502 <REWIND MT:VSN=HISTAP;
503 /
504 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
505 <SKIPCMD:LABEL=END;
506 /
507 .OUT1 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
508 /
509 // ****************************
510 // *** FINISHED WITH FAULTS ***
511 // ****************************
512 // ***************************************************
513 // *** TAPE SAVING OF ALL HISTORY FILES THAT ***
514 // *** ARE NOT EMPTY HAS BEEN COMPLETED. ***
515 // *** ***
516 // *** HOWEVER, NOT ALL HISTORY FILES COULD BE ***
517 // *** TRANSFERRED. ***
518 // *** ***
519 // *** CASE 1: ***
520 // *** ======= ***
521 // *** TAPE IS DAMAGED OR FILES ARE NOT AVAILABLE: ***
522 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
523 // *** ***
524 // *** START COMMAND FILE CG.SA.HHIST AGAIN. ***
525 // *** ***
526 // *** CASE 2: ***
527 // *** ======= ***
528 // *** THE FILES THAT WERE NOT TRANSFERRED ARE ***
529 // *** EMPTY (FAULT L FC 33). ***
530 // *** THERE IS NO FAULT. ***
531 // *** ***
532 // *** HISTORY FILE SAVING IS FINISHED. ***
533 // ***************************************************
534 /
535 <REWIND MT:VSN=HISTAP;
536 /
537 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
538 <SKIPCMD:LABEL=END;
539 /
540 .END <SETCFOPT:ACKCFS=ERROR,DANCMD=NOEXEC,ACKREQ=NEG,SCOPE=GLOBAL;
541 <ENDFILE;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-377
MMN:SW Maintenance
Software

HLTDL

1 <CMDFILE;
2 /
3 // 80-HLTDL-01
4 /
5 /****V01***************************************************************
6 /* *
7 /* COMMAND FILE CG.SA.HLTDL FOR SAVING HISTORY DATA *
8 /* ================================================ *
9 /* *
10 /* TASK DESCRIPTION *
11 /* ---------------- *
12 /* THIS FILE IS USED IN CASE OF LTG OR DLU RECOVERY TO COPY *
13 /* HISTORY FILES FOR FAULT ANALYSIS. *
14 /* *
15 /* THE FOLLOWING FILES ARE SAVED: SG.OPER *
16 /* HF.ARCHIVE *
17 /* PT.AMTIND *
18 /* PT.LTGIND *
19 /* *
20 /* PRESETTINGS: *
21 /* ------------ *
22 /* BEFORE STARTING THE COMMAND FILE THE FML-NUMBER HAS TO BE *
23 /* ANNOUNCED TO THE SYSTEM USING THE FOLLOWING COMMANDS: *
24 /* *
25 /* CR FILE:FILE=CPHIND.FMLNUMXX,TYPE=DOUBLE,SIZE=1; *
26 /* (FMLNUMXX = FML-NUMBER+VERSION COUNTER) *
27 /* *
28 /* FAULT HANDLING: *
29 /* --------------- *
30 /* AFTER INTERRUPTION OF THE FILE PROCESSING VIA FAULT EXITS AND *
31 /* CORRESPONDING FAULT HANDLING THE FILE CAN BE STARTED AGAIN. *
32 /* *
33 /**********************************************************************
34 /
35 <RESET CFOPT;
36 /
37 <SET CFOPT:ACKCFS=ERROR,DANCMD=EXEC,ACKREQ=POS,SCOPE=GLOBAL;
38 /
39 <SET CFOPT:ON=2&3&11&12,SCOPE=GLOBAL;
40 /
41 <EXEC CMDFILE:FILE=CG.SA.HMAST;
42 /
43 <RESET CFOPT;
44 /
45 <ENDFILE;

MMN:SW-COFIP-378 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

HMAST

1 <CMDFILE;
2 /
3 // 80-HMAST-01
4 /
5 /****V01***************************************************************
6 /* *
7 /* COMMAND FILE CG.SA.HMAST FOR SAVING HISTORY DATA *
8 /* ================================================ *
9 /* *
10 /* TASK DESCRIPTION *
11 /* ---------------- *
12 /* THIS FILE IS USED TO COPY HISTORY FILES. THIS COMMAND FILE *
13 /* IS STARTED BY ONE OF THE FOLLOWING COMMAND FILES: *
14 /* *
15 /* CG.SA.HADMI *
16 /* CG.SA.HCCNC *
17 /* CG.SA.HCPPR *
18 /* CG.SA.HLTDL *
19 /* CG.SA.HOSIA *
20 /* CG.SA.HPERI *
21 /* CG.SA.HRECO *
22 /* CG.SA.HSONS *
23 /* CG.SA.HVTAL *
24 /* CG.SA.HVTAD *
25 /* *
26 /* PRESETTINGS: *
27 /* ------------ *
28 /* IF THE COMMAND FILE IS ABORTED AND/OR IF INDIVIDUAL HISTORY *
29 /* FILES ARE TO BE SAVED, THIS COMMAND FILE CAN BE STARTED *
30 /* MANUALLY. *
31 /* IN THIS CASE THE FOLLOWING ASSIGNMENT EXISTS BETWEEN SWITCH *
32 /* SETTING AND THE FORMATTED HISTORY FILE: *
33 /* *
34 /* ON= 1 SG.SESYMP ON=14 TM.MNT.PCM *
35 /* ON= 2 SG.OPER TM.PCM.AL.STAT *
36 /* ON= 3 HF.ARCHIVE TM.MNT.PORT *
37 /* ON= 4 HF.MCP.HWERROR ON=15 XF.DOCKET *
38 /* ON= 6 AD.ZZK HF.TRANSFILE *
39 /* ON= 7 AD.RESTART HF.SMML *
40 /* ON= 8 DC.VX, DC.BX HF.Q3AS *
41 /* ON= 9 HF.MN7.HWERROR PT.X25IND *
42 /* ON=10 PT.AMOIND SG.BX25 *
43 /* ON=11 PT.AMTIND *
44 /* ON=12 PT.LTGIND *
45 /* ON=13 PT.VTIND *
46 /* *
47 /* FAULT HANDLING: *
48 /* --------------- *
49 /* AFTER INTERRUPTION OF THE FILE PROCESSING VIA FAULT EXITS AND *
50 /* CORRESPONDING FAULT HANDLING THE FILE CAN BE STARTED AGAIN. *

A30808-X3080-C485-5-7620 MMN:SW-COFIP-379
MMN:SW Maintenance
Software

HMAST

51 /* *
52 /**********************************************************************
53 /
54 <SET CFOPT:ACKCFS=ERROR,DANCMD=EXEC,ACKREQ=POS,SCOPE=GLOBAL;
55 /
56 <SKIP CMD:LABEL=NSET,OFF=1&2&3&4&6&7&8&9&10&11&12&13&14&15;
57 /
58 /
59 <DISP FILE:FILE=CPHIND.;
60 <SKIP CMD:LABEL=RESTART,ON=32;
61 /
62 /
63 // ******************************************
64 // * SAVING OF HISTORY FILES STARTED. *
65 // * *
66 // * IF LARGE FILES ARE SAVED THE EXECUTING *
67 // * OF THE COMMAND FILE CAN TAKE A WHILE. *
68 // ******************************************
69 /
70 .AMT <STEP;
71 /
72 <SKIPCMD:LABEL=SES,OFF=11;
73 /
74 <ACT OUTDIV:FILE=PT.PATCH,SIZE=20,MODE=CR,ACKIN=ALL,ACKCF=NONE;
75 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
76 <DISP GEN:DISPL=FILES;
77 <SET CFOPT:ACKCFS=ERROR,DANCMD=EXEC,ACKREQ=POS,SCOPE=GLOBAL;
78 <DEC OUTDIV;
79 /
80 /
81 // **************************************************
82 // * IN THIS SECTION THE GP PATCHES ARE DISPLAYED. *
83 // * THEREFORE THE EDITOR EDTS8 IS USED. *
84 // **************************************************
85 /
86 /
87 <EXEC EDTS8;
88 *COMMAND-FILE
89 *R PT.PATCH
90 *S & PSW
91 *N
92 *CH & CL 1:7:=’’
93 *CH & CL 5:?:=’;’
94 *CH & ’T097;’:=’/’
95 *CH & ’T098;’:=’/’
96 *CH & ’T100;’:=’/’
97 *CH & ’T121;’:=’/’
98 *N
99 *CH & ’T’:=’<DISP LTGPRPCH:ID=X,LIB=SY.PSW.T’
100 *0.1:=<CMDFILE;

MMN:SW-COFIP-380 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

HMAST

101 *.
102 *99.999:=<ENDFILE;
103 *.
104 *N
105 *W CF.PATCH
106 *END
107 <SKIPCMD:LABEL=AEDT,ON=32;
108 /
109 <ACT OUTDIV:FILE=PT.AMTIND,SIZE=20,MODE=CR,ACKIN=ALL,ACKCF=NONE;
110 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
111 <STAT SSP;
112 <STAT MB;
113 <STAT SN;
114 <STAT LTG:LTG=X-X;
115 <STAT DLU:DLU=X;
116 <DISP ALARM;
117 <DISP INDIC;
118 <STAT SYP;
119 <STAT CCG;
120 <STAT CCNC:UNIT=CCNP-X;
121 <STAT CCNC:UNIT=SIPA-X;
122 <STAT CCNC:UNIT=SILTC-X;
123 <STAT CCNC:UNIT=SILT-X;
124 <STAT CCNC:UNIT=MUXM-X;
125 <STAT LOG;
126 <DISP CCG;
127 <DISP LTG:LTG=X-X;
128 <DISP DLU:DLU=X;
129 <DISP AUDIT;
130 <DISP SSPRT;
131 <DISP UPDATE;
132 <DISP MD;
133 <DISP JOB;
134 <DISP CFTJOB;
135 <DISP TJOB;
136 <DISP FILE;
137 <DISP GEN;
138 <DISP DBSIZE:DPUSED=YES;
139 <DISP CPPRPCH:ID=X;
140 <DISP CNPATCH:ID=X,UNIT=CPI;
141 <DISP CNPATCH:ID=X,UNIT=SIMP;
142 <DISP IOPPRPCH:ID=X,LIB=SY.PSW.T100;
143 <DISP IOPPRPCH:ID=X,LIB=SY.PSW.T121;
144 <EXEC CMDFILE:FILE=CF.PATCH;
145 /
146 <SET CFOPT:ACKCFS=ERROR,DANCMD=EXEC,ACKREQ=POS,SCOPE=GLOBAL;
147 <DEC OUTDIV;
148 /
149 <DEL FILE:FILE=PT.PATCH;
150 <DEL FILE:FILE=CF.PATCH;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-381
MMN:SW Maintenance
Software

HMAST

151 /
152 <TRANSFILE:FILE=CPH.AIN/PT.AMTIND,COPMOD=POST,MODE=CRD;
153 <SKIPCMD:LABEL=RAMT,OFF=32;
154 <SET CFOPT:ON=16,SCOPE=GLOBAL;
155 /
156 // ****************************
157 // * PT.AMTIND FILE NOT SAVED *
158 // *******************************************************
159 // * REASONS CAN BE: 1. FILE NOT EXISTING *
160 // * 2. FILE IS EMPTY (FAULT L FC 33) *
161 // * 3. DESTINATION FILE ALREADY *
162 // * EXISTING (FAULT PARAM L FC 24) *
163 // * IN THESE CASES, ERROR OUTPUT SHOULD BE IGNORED. *
164 // * *
165 // * IN ALL OTHER CASES, THE ERROR SHOULD BE CLEARED *
166 // * AND THE FOLLOWING MML COMMANDS REENTERED: *
167 // * *
168 // * CR FILE:FILE=CPHIND.FMLNUMXX,TYPE=DOUBLE,SIZE=1; *
169 // * (FMLNUMXX = FML-NUMBER+VERSION COUNTER) *
170 // * RESET CFOPT; *
171 // * SET CFOPT:ON=11; *
172 // * EXEC CMDFILE:FILE=CG.SA.HMAST; *
173 // *******************************************************
174 /
175 <SKIPCMD:LABEL=SES;
176 /
177 .RAMT <STEP;
178 /
179 <DELFILE:FILE=PT.AMTIND;
180 /
181 /
182 .SES <STEP;
183 /
184 <SKIPCMD:LABEL=OPR,OFF=1;
185 /
186 <TRANSFILE:FILE=CPH.SGS/SG.SESYMP,COPMOD=POST,MODE=CRD;
187 <SKIPCMD:LABEL=RSES,OFF=32;
188 <SET CFOPT:ON=16,SCOPE=GLOBAL;
189 /
190 // ****************************
191 // * SG.SESYMP FILE NOT SAVED *
192 // *******************************************************
193 // * REASONS CAN BE: 1. FILE NOT EXISTING *
194 // * 2. FILE IS EMPTY (FAULT L FC 33) *
195 // * 3. DESTINATION FILE ALREADY *
196 // * EXISTING (FAULT PARAM L FC 24) *
197 // * IN THESE CASES, ERROR OUTPUT SHOULD BE IGNORED. *
198 // * *
199 // * IN ALL OTHER CASES, THE ERROR SHOULD BE CLEARED *
200 // * AND THE FOLLOWING MML COMMANDS REENTERED: *

MMN:SW-COFIP-382 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

HMAST

201 // * *
202 // * CR FILE:FILE=CPHIND.FMLNUMXX,TYPE=DOUBLE,SIZE=1; *
203 // * (FMLMUNXX = FML-NUMBER+VERSION COUNTER) *
204 // * RESET CFOPT; *
205 // * SET CFOPT:ON=1; *
206 // * EXEC CMDFILE:FILE=CG.SA.HMAST; *
207 // *******************************************************
208 /
209 <SKIPCMD:LABEL=OPR;
210 /
211 .RSES <STEP;
212 /
213 <RELCYCFILE:FILE=SG.SESYMP;
214 /
215 /
216 .OPR <STEP;
217 /
218 <SKIPCMD:LABEL=ARC,OFF=2;
219 /
220 <DMPSGMSG;
221 <TRANSFILE:FILE=CPH.SGO/SG.OPER,COPMOD=POST,MODE=CRD;
222 <SKIPCMD:LABEL=ROPR,OFF=32;
223 <SET CFOPT:ON=16,SCOPE=GLOBAL;
224 /
225 // **************************
226 // * SG.OPER FILE NOT SAVED *
227 // *******************************************************
228 // * REASONS CAN BE: 1. FILE NOT EXISTING *
229 // * 2. FILE IS EMPTY (FAULT L FC 33) *
230 // * 3. DESTINATION FILE ALREADY *
231 // * EXISTING (FAULT PARAM L FC 24) *
232 // * IN THESE CASES, ERROR OUTPUT SHOULD BE IGNORED. *
233 // * *
234 // * IN ALL OTHER CASES, THE ERROR SHOULD BE CLEARED *
235 // * AND THE FOLLOWING MML COMMANDS REENTERED: *
236 // * *
237 // * CR FILE:FILE=CPHIND.FMLNUMXX,TYPE=DOUBLE,SIZE=1; *
238 // * (FMLNUMXX = FML-NUMBER+VERSION COUNTER) *
239 // * RESET CFOPT; *
240 // * SET CFOPT:ON=2; *
241 // * EXEC CMDFILE:FILE=CG.SA.HMAST; *
242 // *******************************************************
243 /
244 /
245 <SKIPCMD:LABEL=ARC;
246 /
247 .ROPR <STEP;
248 /
249 <RELCYCFILE:FILE=SG.OPER;
250 /

A30808-X3080-C485-5-7620 MMN:SW-COFIP-383
MMN:SW Maintenance
Software

HMAST

251 .ARC <STEP;

252 /
253 <SKIPCMD:LABEL=HWE,OFF=3;
254 /
255 <TRANSFILE:FILE=CPH.HFA/HF.ARCHIVE,COPMOD=POST,MODE=CRD;
256 <SKIPCMD:LABEL=RARC,OFF=32;
257 <SET CFOPT:ON=16,SCOPE=GLOBAL;
258 /
259 // *****************************
260 // * HF.ARCHIVE FILE NOT SAVED *
261 // *******************************************************
262 // * REASONS CAN BE: 1. FILE NOT EXISTING *
263 // * 2. FILE IS EMPTY (FAULT L FC 33) *
264 // * 3. DESTINATION FILE ALREADY *
265 // * EXISTING (FAULT PARAM L FC 24) *
266 // * IN THESE CASES, ERROR OUTPUT SHOULD BE IGNORED. *
267 // * *
268 // * IN ALL OTHER CASES, THE ERROR SHOULD BE CLEARED *
269 // * AND THE FOLLOWING MML COMMANDS REENTERED: *
270 // * *
271 // * CR FILE:FILE=CPHIND.FMLNUMXX,TYPE=DOUBLE,SIZE=1; *
272 // * (FMLNUMXX = FML-NUMBER+VERSION COUNTER) *
273 // * RESET CFOPT; *
274 // * SET CFOPT:ON=3; *
275 // * EXEC CMDFILE:FILE=CG.SA.HMAST; *
276 // *******************************************************
277 /
278 /
279 <SKIPCMD:LABEL=HWE;
280 /
281 .RARC <STEP;
282 /
283 <RELCYCFILE:FILE=HF.ARCHIVE;
284 /
285 .HWE <STEP;
286 /
287 <SKIPCMD:LABEL=ZZK,OFF=4;
288 /
289 <TRANSFILE:FILE=CPH.HFH/HF.MCP.HWERROR,COPMOD=POST,MODE=CRD;
290 <SKIPCMD:LABEL=RHWE,OFF=32;
291 <SET CFOPT:ON=16,SCOPE=GLOBAL;
292 /
293 // *********************************
294 // * HF.MCP.HWERROR FILE NOT SAVED *
295 // *******************************************************
296 // * REASONS CAN BE: 1. FILE NOT EXISTING *
297 // * 2. FILE IS EMPTY (FAULT L FC 33) *
298 // * 3. DESTINATION FILE ALREADY *
299 // * EXISTING (FAULT PARAM L FC 24) *
300 // * IN THESE CASES, ERROR OUTPUT SHOULD BE IGNORED. *

MMN:SW-COFIP-384 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

HMAST

301 // * *
302 // * IN ALL OTHER CASES, THE ERROR SHOULD BE CLEARED *
303 // * AND THE FOLLOWING MML COMMANDS REENTERED: *
304 // * *
305 // * CR FILE:FILE=CPHIND.FMLNUMXX,TYPE=DOUBLE,SIZE=1; *
306 // * (FMLNUMXX = FML-NUMBER+VERSION COUNTER) *
307 // * RESET CFOPT; *
308 // * SET CFOPT:ON=4; *
309 // * EXEC CMDFILE:FILE=CG.SA.HMAST; *
310 // *******************************************************
311 /
312 /
313 <SKIPCMD:LABEL=ZZK;
314 /
315 .RHWE <STEP;
316 /
317 <RELCYCFILE:FILE=HF.MCP.HWERROR;
318 /
319 .ZZK <STEP;
320 /
321 <SKIPCMD:LABEL=RES,OFF=6;
322 /
323 <TRANSFILE:FILE=CPH.ZZK/AD.ZZK,COPMOD=POST,MODE=CRD;
324 <SKIPCMD:LABEL=RZZK,OFF=32;
325 <SET CFOPT:ON=16,SCOPE=GLOBAL;
326 /
327 // *************************
328 // * AD.ZZK FILE NOT SAVED *
329 // *******************************************************
330 // * REASONS CAN BE: 1. FILE NOT EXISTING *
331 // * 2. FILE IS EMPTY (FAULT L FC 33) *
332 // * 3. DESTINATION FILE ALREADY *
333 // * EXISTING (FAULT PARAM L FC 24) *
334 // * IN THESE CASES, ERROR OUTPUT SHOULD BE IGNORED. *
335 // * *
336 // * IN ALL OTHER CASES, THE ERROR SHOULD BE CLEARED *
337 // * AND THE FOLLOWING MML COMMANDS REENTERED: *
338 // * *
339 // * CR FILE:FILE=CPHIND.FMLNUMXX,TYPE=DOUBLE,SIZE=1; *
340 // * (FMLNUMXX = FML-NUMBER+VERSION COUNTER) *
341 // * RESET CFOPT; *
342 // * SET CFOPT:ON=6; *
343 // * EXEC CMDFILE:FILE=CG.SA.HMAST; *
344 // *******************************************************
345 /
346 <SKIPCMD:LABEL=RES;
347 /
348 .RZZK <STEP;
349 /
350 <RELCYCFILE:FILE=AD.ZZK;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-385
MMN:SW Maintenance
Software

HMAST

351 /
352 .RES <STEP;
353 /
354 <SKIPCMD:LABEL=DC,OFF=7;
355 /
356 <TRANSFILE:FILE=CPH.RES/AD.RESTART,COPMOD=POST,MODE=CRD;
357 <SKIPCMD:LABEL=RRES,OFF=32;
358 <SET CFOPT:ON=16,SCOPE=GLOBAL;
359 /
360 // *****************************
361 // * AD.RESTART FILE NOT SAVED *
362 // *******************************************************
363 // * REASONS CAN BE: 1. FILE NOT EXISTING *
364 // * 2. FILE IS EMPTY (FAULT L FC 33) *
365 // * 3. DESTINATION FILE ALREADY *
366 // * EXISTING (FAULT PARAM L FC 24) *
367 // * IN THESE CASES, ERROR OUTPUT SHOULD BE IGNORED. *
368 // * *
369 // * IN ALL OTHER CASES, THE ERROR SHOULD BE CLEARED *
370 // * AND THE FOLLOWING MML COMMANDS REENTERED: *
371 // * *
372 // * CR FILE:FILE=CPHIND.FMLNUMXX,TYPE=DOUBLE,SIZE=1; *
373 // * (FMLNUMXX = FML-NUMBER+VERSION COUNTER) *
374 // * RESET CFOPT; *
375 // * SET CFOPT:ON=7; *
376 // * EXEC CMDFILE:FILE=CG.SA.HMAST; *
377 // *******************************************************
378 /
379 <SKIPCMD:LABEL=DC;
380 /
381 .RRES <STEP;
382 /
383 <RELCYCFILE:FILE=AD.RESTART;
384 /
385 .DC <STEP;
386 /
387 <SKIPCMD:LABEL=MN7,OFF=8;
388 /
389 <DISPFILE:FILE=DC.;
390 <SKIPCMD:LABEL=V0,OFF=32;
391 <SET CFOPT:ON=16,SCOPE=GLOBAL;
392 /
393 // *************************************
394 // ** THERE ARE NO DC.-FILES EXISTING **
395 // *************************************
396 /
397 <SKIPCMD:LABEL=MN7;
398 /
399 .V0 <STEP;
400 <DISPFILE:FILE=DC.V00;

MMN:SW-COFIP-386 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

HMAST

401 <SKIPCMD:LABEL=V1,ON=32;
402 <CRAFILE:AFILE=DD.V00,SIZE=800,TYPE=SINGLE;
403 <DMPSFGSYMP:FILE=DC.V00;
404 <TRANSFILE:FILE=CPH.DC0/DD.V00,COPMOD=POST,MODE=CRD;
405 <CANAFILE:AFILE=DD.V00;
406 <DELFILE:FILE=DC.V00;
407 /
408 .V1 <STEP;
409 <DISPFILE:FILE=DC.V01;
410 <SKIPCMD:LABEL=V2,ON=32;
411 <CRAFILE:AFILE=DD.V01,SIZE=800,TYPE=SINGLE;
412 <DMPSFGSYMP:FILE=DC.V01;
413 <TRANSFILE:FILE=CPH.DC1/DD.V01,COPMOD=POST,MODE=CRD;
414 <CANAFILE:AFILE=DD.V01;
415 <DELFILE:FILE=DC.V01;
416 /
417 .V2 <STEP;
418 <DISPFILE:FILE=DC.V02;
419 <SKIPCMD:LABEL=V3,ON=32;
420 <CRAFILE:AFILE=DD.V02,SIZE=800,TYPE=SINGLE;
421 <DMPSFGSYMP:FILE=DC.V02;
422 <TRANSFILE:FILE=CPH.DC2/DD.V02,COPMOD=POST,MODE=CRD;
423 <CANAFILE:AFILE=DD.V02;
424 <DELFILE:FILE=DC.V02;
425 /
426 .V3 <STEP;
427 <DISPFILE:FILE=DC.V03;
428 <SKIPCMD:LABEL=V4,ON=32;
429 <CRAFILE:AFILE=DD.V03,SIZE=800,TYPE=SINGLE;
430 <DMPSFGSYMP:FILE=DC.V03;
431 <TRANSFILE:FILE=CPH.DC3/DD.V03,COPMOD=POST,MODE=CRD;
432 <CANAFILE:AFILE=DD.V03;
433 <DELFILE:FILE=DC.V03;
434 /
435 .V4 <STEP;
436 <DISPFILE:FILE=DC.V04;
437 <SKIPCMD:LABEL=V5,ON=32;
438 <CRAFILE:AFILE=DD.V04,SIZE=800,TYPE=SINGLE;
439 <DMPSFGSYMP:FILE=DC.V04;
440 <TRANSFILE:FILE=CPH.DC4/DD.V04,COPMOD=POST,MODE=CRD;
441 <CANAFILE:AFILE=DD.V04;
442 <DELFILE:FILE=DC.V04;
443 /
444 .V5 <STEP;
445 <DISPFILE:FILE=DC.V05;
446 <SKIPCMD:LABEL=V6,ON=32;
447 <CRAFILE:AFILE=DD.V05,SIZE=800,TYPE=SINGLE;
448 <DMPSFGSYMP:FILE=DC.V05;
449 <TRANSFILE:FILE=CPH.DC5/DD.V05,COPMOD=POST,MODE=CRD;
450 <CANAFILE:AFILE=DD.V05;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-387
MMN:SW Maintenance
Software

HMAST

451 <DELFILE:FILE=DC.V05;
452 /
453 .V6 <STEP;
454 <DISPFILE:FILE=DC.V06;
455 <SKIPCMD:LABEL=V7,ON=32;
456 <CRAFILE:AFILE=DD.V06,SIZE=800,TYPE=SINGLE;
457 <DMPSFGSYMP:FILE=DC.V06;
458 <TRANSFILE:FILE=CPH.DC6/DD.V06,COPMOD=POST,MODE=CRD;
459 <CANAFILE:AFILE=DD.V06;
460 <DELFILE:FILE=DC.V06;
461 /
462 .V7 <STEP;
463 <DISPFILE:FILE=DC.V07;
464 <SKIPCMD:LABEL=V8,ON=32;
465 <CRAFILE:AFILE=DD.V07,SIZE=800,TYPE=SINGLE;
466 <DMPSFGSYMP:FILE=DC.V07;
467 <TRANSFILE:FILE=CPH.DC7/DD.V07,COPMOD=POST,MODE=CRD;
468 <CANAFILE:AFILE=DD.V07;
469 <DELFILE:FILE=DC.V07;
470 /
471 .V8 <STEP;
472 <DISPFILE:FILE=DC.B00;
473 <SKIPCMD:LABEL=V9,ON=32;
474 <CRAFILE:AFILE=DD.B00,SIZE=800,TYPE=SINGLE;
475 <DMPSFGSYMP:FILE=DC.B00;
476 <TRANSFILE:FILE=CPH.BC0/DD.B00,COPMOD=POST,MODE=CRD;
477 <CANAFILE:AFILE=DD.B00;
478 <DELFILE:FILE=DC.B00;
479 /
480 .V9 <STEP;
481 <DISPFILE:FILE=DC.B01;
482 <SKIPCMD:LABEL=MN7,ON=32;
483 <CRAFILE:AFILE=DD.B01,SIZE=800,TYPE=SINGLE;
484 <DMPSFGSYMP:FILE=DC.B01;
485 <TRANSFILE:FILE=CPH.BC1/DD.B01,COPMOD=POST,MODE=CRD;
486 <CANAFILE:AFILE=DD.B01;
487 <DELFILE:FILE=DC.B01;
488 /
489 .MN7 <STEP;
490 /
491 <SKIPCMD:LABEL=AMO,OFF=9;
492 /
493 <TRANSFILE:FILE=CPH.HF7/HF.MN7.HWERROR,COPMOD=POST,MODE=CRD;
494 <SKIPCMD:LABEL=RMN7,OFF=32;
495 <SET CFOPT:ON=16,SCOPE=GLOBAL;
496 /
497 // *********************************
498 // * HF.MN7.HWERROR FILE NOT SAVED *
499 // *******************************************************
500 // * REASONS CAN BE: 1. FILE NOT EXISTING *

MMN:SW-COFIP-388 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

HMAST

501 // * 2. FILE IS EMPTY (FAULT L FC 33) *

502 // * 3. DESTINATION FILE ALREADY *
503 // * EXISTING (FAULT PARAM L FC 24) *
504 // * IN THESE CASES, ERROR OUTPUT SHOULD BE IGNORED. *
505 // * *
506 // * IN ALL OTHER CASES, THE ERROR SHOULD BE CLEARED *
507 // * AND THE FOLLOWING MML COMMANDS REENTERED: *
508 // * *
509 // * CR FILE:FILE=CPHIND.FMLNUMXX,TYPE=DOUBLE,SIZE=1; *
510 // * (FMLNUMXX = FML-NUMBER+VERSION COUNTER) *
511 // * RESET CFOPT; *
512 // * SET CFOPT:ON=9; *
513 // * EXEC CMDFILE:FILE=CG.SA.HMAST; *
514 // *******************************************************
515 /
516 <SKIPCMD:LABEL=AMO;
517 /
518 .RMN7 <STEP;
519 /
520 <RELCYCFILE:FILE=HF.MN7.HWERROR;
521 /
522 .AMO <STEP;
523 /
524 <SKIPCMD:LABEL=LTG,OFF=10;
525 /
526 <DISPFILE:FILE=PT.AMOIND;
527 <SKIPCMD:LABEL=CAMO,OFF=32;
528 <SET CFOPT:ON=16,SCOPE=GLOBAL;
529 /
530 // **************************
531 // * PT.AMOIND NOT EXISTING *
532 // ***************************************************
533 // * PLEASE CREATE FILE ACCORDING TO PROCEDURE SW231 *
534 // * AFTER THE COMMAND FILE HAS ENDED AND INSERT THE *
535 // * FOLLOWING MML COMMANDS AGAIN: *
536 // * *
537 // * CR FILE:FILE=CPHIND.FMLNUMXX,TYPE=DOUBLE,SIZE=1;*
538 // * (FMLNUMXX = FML-NUMBER+VERSION COUNTER) *
539 // * RESET CFOPT; *
540 // * SET CFOPT:ON=10; *
541 // * EXEC CMDFILE:FILE=CG.SA.HMAST; *
542 // ***************************************************
543 /
544 <SKIPCMD:LABEL=LTG;
545 /
546 .CAMO <STEP;
547 /
548 <TRANSFILE:FILE=CPH.AMO/PT.AMOIND,COPMOD=POST,MODE=CRD;
549 <SKIPCMD:LABEL=RCAMO,OFF=32;
550 <SET CFOPT:ON=16,SCOPE=GLOBAL;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-389
MMN:SW Maintenance
Software

HMAST

551 // ****************************
552 // * PT.AMOIND FILE NOT SAVED *
553 // *******************************************************
554 // * REASONS CAN BE: 1. FILE NOT EXISTING *
555 // * 2. FILE IS EMPTY (FAULT L FC 33) *
556 // * 3. DESTINATION FILE ALREADY *
557 // * EXISTING (FAULT PARAM L FC 24) *
558 // * IN THESE CASES, ERROR OUTPUT SHOULD BE IGNORED. *
559 // * *
560 // * IN ALL OTHER CASES, THE ERROR SHOULD BE CLEARED *
561 // * AND THE FOLLOWING MML COMMANDS REENTERED: *
562 // * *
563 // * CR FILE:FILE=CPHIND.FMLNUMXX,TYPE=DOUBLE,SIZE=1; *
564 // * (FMLNUMXX = FML-NUMBER+VERSION COUNTER) *
565 // * RESET CFOPT; *
566 // * SET CFOPT:ON=10; *
567 // * EXEC CMDFILE:FILE=CG.SA.HMAST; *
568 // *******************************************************
569 /
570 <SKIPCMD:LABEL=LTG;
571 /
572 .RCAMO <STEP;
573 /
574 <DELFILE:FILE=PT.AMOIND;
575 /
576 .LTG <STEP;
577 /
578 <SKIPCMD:LABEL=VT,OFF=12;
579 /
580 <DISPFILE:FILE=PT.LTGIND;
581 <SKIPCMD:LABEL=CLTG,OFF=32;
582 <SET CFOPT:ON=16,SCOPE=GLOBAL;
583 /
584 // *******************************
585 // * PT.LTGIND FILE NOT EXISTING *
586 // ***************************************************
587 // * PLEASE CREATE FILE ACCORDING TO PROCEDURE SW231 *
588 // * AFTER THE COMMAND FILE HAS ENDED AND INSERT THE *
589 // * FOLLOWING MML COMMANDS AGAIN: *
590 // * *
591 // * CR FILE:FILE=CPHIND.FMLNUMXX,TYPE=DOUBLE,SIZE=1;*
592 // * (FMLNUMXX = FML-NUMBER+VERSION COUNTER) *
593 // * RESET CFOPT; *
594 // * SET CFOPT:ON=12; *
595 // * EXEC CMDFILE:FILE=CG.SA.HMAST; *
596 // ***************************************************
597 /
598 <SKIPCMD:LABEL=VT;
599 /
600 .CLTG <STEP;

MMN:SW-COFIP-390 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

HMAST

601 /
602 <TRANSFILE:FILE=CPH.LIN/PT.LTGIND,COPMOD=POST,MODE=CRD;
603 <SKIPCMD:LABEL=RCLTG,OFF=32;
604 <SET CFOPT:ON=16,SCOPE=GLOBAL;
605 /
606 // ****************************
607 // * PT.LTGIND FILE NOT SAVED *
608 // *******************************************************
609 // * REASONS CAN BE: 1. FILE NOT EXISTING *
610 // * 2. FILE IS EMPTY (FAULT L FC 33) *
611 // * 3. DESTINATION FILE ALREADY *
612 // * EXISTING (FAULT PARAM L FC 24) *
613 // * IN THESE CASES, ERROR OUTPUT SHOULD BE IGNORED. *
614 // * *
615 // * IN ALL OTHER CASES, THE ERROR SHOULD BE CLEARED *
616 // * AND THE FOLLOWING MML COMMANDS REENTERED: *
617 // * *
618 // * CR FILE:FILE=CPHIND.FMLNUMXX,TYPE=DOUBLE,SIZE=1; *
619 // * (FMLNUMXX = FML-NUMBER+VERSION COUNTER) *
620 // * RESET CFOPT; *
621 // * SET CFOPT:ON=12; *
622 // * EXEC CMDFILE:FILE=CG.SA.HMAST; *
623 // *******************************************************
624 /
625 <SKIPCMD:LABEL=VT;
626 /
627 .RCLTG <STEP;
628 /
629 <DELFILE:FILE=PT.LTGIND;
630 /
631 .VT <STEP;
632 /
633 <SKIPCMD:LABEL=MNT,OFF=13;
634 /
635 <DISPFILE:FILE=PT.VTIND;
636 <SKIPCMD:LABEL=CVT,OFF=32;
637 <SET CFOPT:ON=16,SCOPE=GLOBAL;
638 /
639 // ******************************
640 // * PT.VTIND FILE NOT EXISTING *
641 // ***************************************************
642 // * PLEASE CREATE FILE ACCORDING TO PROCEDURE SW231 *
643 // * AFTER THE COMMAND FILE HAS ENDED AND INSERT THE *
644 // * FOLLOWING MML COMMANDS AGAIN: *
645 // * *
646 // * CR FILE:FILE=CPHIND.FMLNUMXX,TYPE=DOUBLE,SIZE=1;*
647 // * (FMLNUMXX = FML-NUMBER+VERSION COUNTER) *
648 // * RESET CFOPT; *
649 // * SET CFOPT:ON=13; *
650 // * EXEC CMDFILE:FILE=CG.SA.HMAST; *

A30808-X3080-C485-5-7620 MMN:SW-COFIP-391
MMN:SW Maintenance
Software

HMAST

651 // ***************************************************
652 /
653 <SKIPCMD:LABEL=MNT;
654 /
655 .CVT <STEP;
656 /
657 <TRANSFILE:FILE=CPH.VIN/PT.VTIND,COPMOD=POST,MODE=CRD;
658 <SKIPCMD:LABEL=RCVT,OFF=32;
659 <SET CFOPT:ON=16,SCOPE=GLOBAL;
660 /
661 // ***************************
662 // * PT.VTIND FILE NOT SAVED *
663 // *******************************************************
664 // * REASONS CAN BE: 1. FILE NOT EXISTING *
665 // * 2. FILE IS EMPTY (FAULT L FC 33) *
666 // * 3. DESTINATION FILE ALREADY *
667 // * EXISTING (FAULT PARAM L FC 24) *
668 // * IN THESE CASES, ERROR OUTPUT SHOULD BE IGNORED. *
669 // * *
670 // * IN ALL OTHER CASES, THE ERROR SHOULD BE CLEARED *
671 // * AND THE FOLLOWING MML COMMANDS REENTERED: *
672 // * *
673 // * CR FILE:FILE=CPHIND.FMLNUMXX,TYPE=DOUBLE,SIZE=1; *
674 // * (FMLNUMXX = FML-NUMBER+VERSION COUNTER) *
675 // * RESET CFOPT; *
676 // * SET CFOPT:ON=13; *
677 // * EXEC CMDFILE:FILE=CG.SA.HMAST; *
678 // *******************************************************
679 /
680 <SKIPCMD:LABEL=MNT;
681 /
682 .RCVT <STEP;
683 /
684 <DELFILE:FILE=PT.VTIND;
685 /
686 .MNT <STEP;
687 /
688 <SKIPCMD:LABEL=XFD,OFF=14;
689 /
690 <TRANSFILE:FILE=CPH.PCM/TM.MNT.PCM,COPMOD=POST,MODE=CRD;
691 <SKIPCMD:LABEL=RMNT,OFF=32;
692 <SET CFOPT:ON=16,SCOPE=GLOBAL;
693 /
694 // *****************************
695 // * TM.MNT.PCM FILE NOT SAVED *
696 // *******************************************************
697 // * REASONS CAN BE: 1. FILE NOT EXISTING *
698 // * 2. FILE IS EMPTY (FAULT L FC 33) *
699 // * 3. DESTINATION FILE ALREADY *
700 // * EXISTING (FAULT PARAM L FC 24) *

MMN:SW-COFIP-392 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

HMAST

701 // * IN THESE CASES, ERROR OUTPUT SHOULD BE IGNORED. *

702 // * *
703 // * IN ALL OTHER CASES, THE ERROR SHOULD BE CLEARED *
704 // * AND THE FOLLOWING MML COMMANDS REENTERED: *
705 // * *
706 // * CR FILE:FILE=CPHIND.FMLNUMXX,TYPE=DOUBLE,SIZE=1; *
707 // * (FMLNUMXX = FML-NUMBER+VERSION COUNTER) *
708 // * RESET CFOPT; *
709 // * SET CFOPT:ON=14; *
710 // * EXEC CMDFILE:FILE=CG.SA.HMAST; *
711 // *******************************************************
712 /
713 <SKIPCMD:LABEL=PCM;
714 /
715 .RMNT <STEP;
716 /
717 <RELCYCFILE:FILE=TM.MNT.PCM;
718 /
719 .PCM <STEP;
720 /
721 <TRANSFILE:FILE=CPH.AST/TM.PCM.AL.STAT,COPMOD=POST,MODE=CRD;
722 <SKIPCMD:LABEL=RPCM,OFF=32;
723 <SET CFOPT:ON=16,SCOPE=GLOBAL;
724 /
725 // ********************************
726 // * TM.PCM.ALSTAT FILE NOT SAVED *
727 // *******************************************************
728 // * REASONS CAN BE: 1. FILE NOT EXISTING *
729 // * 2. FILE IS EMPTY (FAULT L FC 33) *
730 // * 3. DESTINATION FILE ALREADY *
731 // * EXISTING (FAULT PARAM L FC 24) *
732 // * IN THESE CASES, ERROR OUTPUT SHOULD BE IGNORED. *
733 // * *
734 // * IN ALL OTHER CASES, THE ERROR SHOULD BE CLEARED *
735 // * AND THE FOLLOWING MML COMMANDS REENTERED: *
736 // * *
737 // * CR FILE:FILE=CPHIND.FMLNUMXX,TYPE=DOUBLE,SIZE=1; *
738 // * (FMLNUMXX = FML-NUMBER+VERSION COUNTER) *
739 // * RESET CFOPT; *
740 // * SET CFOPT:ON=14; *
741 // * EXEC CMDFILE:FILE=CG.SA.HMAST; *
742 // *******************************************************
743 /
744 <SKIPCMD:LABEL=POR;
745 /
746 .RPCM <STEP;
747 /
748 <RELCYCFILE:FILE=TM.PCM.AL.STAT;
749 /
750 .POR <STEP;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-393
MMN:SW Maintenance
Software

HMAST

751 /
752 <TRANSFILE:FILE=CPH.PRT/TM.MNT.PORT,COPMOD=POST,MODE=CRD;
753 <SKIPCMD:LABEL=RPOR,OFF=32;
754 <SET CFOPT:ON=16,SCOPE=GLOBAL;
755 /
756 // ******************************
757 // * TM.MNT.PORT FILE NOT SAVED *
758 // *******************************************************
759 // * REASONS CAN BE: 1. FILE NOT EXISTING *
760 // * 2. FILE IS EMPTY (FAULT L FC 33) *
761 // * 3. DESTINATION FILE ALREADY *
762 // * EXISTING (FAULT PARAM L FC 24) *
763 // * IN THESE CASES, ERROR OUTPUT SHOULD BE IGNORED. *
764 // * *
765 // * IN ALL OTHER CASES, THE ERROR SHOULD BE CLEARED *
766 // * AND THE FOLLOWING MML COMMANDS REENTERED: *
767 // * *
768 // * CR FILE:FILE=CPHIND.FMLNUMXX,TYPE=DOUBLE,SIZE=1; *
769 // * (FMLNUMXX = FML-NUMBER+VERSION COUNTER) *
770 // * RESET CFOPT; *
771 // * SET CFOPT:ON=14; *
772 // * EXEC CMDFILE:FILE=CG.SA.HMAST; *
773 // *******************************************************
774 /
775 <SKIPCMD:LABEL=XFD;
776 /
777 .RPOR <STEP;
778 /
779 <RELCYCFILE:FILE=TM.MNT.PORT;
780 /
781 .XFD <STEP;
782 /
783 <SKIPCMD:LABEL=AOUT,OFF=15;
784 /
785 <TRANSFILE:FILE=CPH.XDO/XF.DOCKET,MODE=CRD;
786 <SKIPCMD:LABEL=HFT,OFF=32;
787 <SET CFOPT:ON=16,SCOPE=GLOBAL;
788 /
789 // ****************************
790 // * XF.DOCKET FILE NOT SAVED *
791 // *******************************************************
792 // * REASONS CAN BE: 1. FILE NOT EXISTING *
793 // * 2. FILE IS EMPTY (FAULT L FC 33) *
794 // * 3. DESTINATION FILE ALREADY *
795 // * EXISTING (FAULT PARAM L FC 24) *
796 // * IN THESE CASES, ERROR OUTPUT SHOULD BE IGNORED. *
797 // * *
798 // * IN ALL OTHER CASES, THE ERROR SHOULD BE CLEARED *
799 // * AND THE FOLLOWING MML COMMANDS REENTERED: *
800 // * *

MMN:SW-COFIP-394 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

HMAST

801 // * CR FILE:FILE=CPHIND.FMLNUMXX,TYPE=DOUBLE,SIZE=1; *
802 // * (FMLNUMXX = FML-NUMBER+VERSION COUNTER) *
803 // * RESET CFOPT; *
804 // * SET CFOPT:ON=15; *
805 // * EXEC CMDFILE:FILE=CG.SA.HMAST; *
806 // *******************************************************
807 /
808 .HFT <STEP;
809 /
810 <TRANSFILE:FILE=CPH.XTR/HF.TRANSFILE,COPMOD=POST,MODE=CRD;
811 <SKIPCMD:LABEL=RHFT,OFF=32;
812 <SET CFOPT:ON=16,SCOPE=GLOBAL;
813 /
814 // *******************************
815 // * HF.TRANSFILE FILE NOT SAVED *
816 // *******************************************************
817 // * REASONS CAN BE: 1. FILE NOT EXISTING *
818 // * 2. FILE IS EMPTY (FAULT L FC 33) *
819 // * 3. DESTINATION FILE ALREADY *
820 // * EXISTING (FAULT PARAM L FC 24) *
821 // * IN THESE CASES, ERROR OUTPUT SHOULD BE IGNORED. *
822 // * *
823 // * IN ALL OTHER CASES, THE ERROR SHOULD BE CLEARED *
824 // * AND THE FOLLOWING MML COMMANDS REENTERED: *
825 // * *
826 // * CR FILE:FILE=CPHIND.FMLNUMXX,TYPE=DOUBLE,SIZE=1; *
827 // * (FMLNUMXX = FML-NUMBER+VERSION COUNTER) *
828 // * RESET CFOPT; *
829 // * SET CFOPT:ON=15; *
830 // * EXEC CMDFILE:FILE=CG.SA.HMAST; *
831 // *******************************************************
832 /
833 <SKIPCMD:LABEL=HFS;
834 /
835 .RHFT <STEP;
836 /
837 <RELCYCFILE:FILE=HF.TRANSFILE;
838 /
839 .HFS <STEP;
840 /
841 <TRANSFILE:FILE=CPH.XSM/HF.SMML,COPMOD=POST,MODE=CRD;
842 <SKIPCMD:LABEL=RHFS,OFF=32;
843 <SET CFOPT:ON=16,SCOPE=GLOBAL;
844 /
845 // **************************
846 // * HF.SMML FILE NOT SAVED *
847 // *******************************************************
848 // * REASONS CAN BE: 1. FILE NOT EXISTING *
849 // * 2. FILE IS EMPTY (FAULT L FC 33) *
850 // * 3. DESTINATION FILE ALREADY *

A30808-X3080-C485-5-7620 MMN:SW-COFIP-395
MMN:SW Maintenance
Software

HMAST

851 // * EXISTING (FAULT PARAM L FC 24) *

852 // * IN THESE CASES, ERROR OUTPUT SHOULD BE IGNORED. *
853 // * *
854 // * IN ALL OTHER CASES, THE ERROR SHOULD BE CLEARED *
855 // * AND THE FOLLOWING MML COMMANDS REENTERED: *
856 // * *
857 // * CR FILE:FILE=CPHIND.FMLNUMXX,TYPE=DOUBLE,SIZE=1; *
858 // * (FMLNUMXX = FML-NUMBER+VERSION COUNTER) *
859 // * RESET CFOPT; *
860 // * SET CFOPT:ON=15; *
861 // * EXEC CMDFILE:FILE=CG.SA.HMAST; *
862 // *******************************************************
863 /
864 <SKIPCMD:LABEL=HFQ;
865 /
866 .RHFS <STEP;
867 /
868 <RELCYCFILE:FILE=HF.SMML;
869 /
870 .HFQ <STEP;
871 /
872 <TRANSFILE:FILE=CPH.XQ3/HF.Q3AS,COPMOD=POST,MODE=CRD;
873 <SKIPCMD:LABEL=RHFQ,OFF=32;
874 <SET CFOPT:ON=16,SCOPE=GLOBAL;
875 /
876 // **************************
877 // * HF.Q3AS FILE NOT SAVED *
878 // *******************************************************
879 // * REASONS CAN BE: 1. FILE NOT EXISTING *
880 // * 2. FILE IS EMPTY (FAULT L FC 33) *
881 // * 3. DESTINATION FILE ALREADY *
882 // * EXISTING (FAULT PARAM L FC 24) *
883 // * IN THESE CASES, ERROR OUTPUT SHOULD BE IGNORED. *
884 // * *
885 // * IN ALL OTHER CASES, THE ERROR SHOULD BE CLEARED *
886 // * AND THE FOLLOWING MML COMMANDS REENTERED: *
887 // * *
888 // * CR FILE:FILE=CPHIND.FMLNUMXX,TYPE=DOUBLE,SIZE=1; *
889 // * (FMLNUMXX = FML-NUMBER+VERSION COUNTER) *
890 // * RESET CFOPT; *
891 // * SET CFOPT:ON=15; *
892 // * EXEC CMDFILE:FILE=CG.SA.HMAST; *
893 // *******************************************************
894 /
895 <SKIPCMD:LABEL=PTX;
896 /
897 .RHFQ <STEP;
898 /
899 <RELCYCFILE:FILE=HF.Q3AS;
900 /

MMN:SW-COFIP-396 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

HMAST

901 .PTX <STEP;

902 /
903 <ACT OUTDIV:FILE=PT.X25IND,SIZE=20,MODE=CR,ACKIN=ALL,ACKCF=NONE;
904 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
905 <DISP IOP:IOP=IOPLAU-X;
906 <DISP PRO:PRONAM=X;
907 <DISP X25LINK:X25LINK=X;
908 <DISP OSIADR:ADRNAM=X;
909 <DISP APPL:APPLID=X;
910 <DISP X25DTE:TYPE=LOCAL;
911 <DISP X25DTE:TYPE=REMOTE;
912 <DISP X25ROUTE:ROUTNAM=X;
913 <SET CFOPT:ACKCFS=ERROR,DANCMD=EXEC,ACKREQ=POS,SCOPE=GLOBAL;
914 <DEC OUTDIV;
915 /
916 <TRANSFILE:FILE=CPH.XIN/PT.X25IND,COPMOD=POST,MODE=CRD;
917 <SKIPCMD:LABEL=RPTX,OFF=32;
918 <SET CFOPT:ON=16,SCOPE=GLOBAL;
919 /
920 // ****************************
921 // * PT.X25IND FILE NOT SAVED *
922 // *******************************************************
923 // * REASONS CAN BE: 1. FILE NOT EXISTING *
924 // * 2. FILE IS EMPTY (FAULT L FC 33) *
925 // * 3. DESTINATION FILE ALREADY *
926 // * EXISTING (FAULT PARAM L FC 24) *
927 // * IN THESE CASES, ERROR OUTPUT SHOULD BE IGNORED. *
928 // * *
929 // * IN ALL OTHER CASES, THE ERROR SHOULD BE CLEARED *
930 // * AND THE FOLLOWING MML COMMANDS REENTERED: *
931 // * *
932 // * CR FILE:FILE=CPHIND.FMLNUMXX,TYPE=DOUBLE,SIZE=1; *
933 // * (FMLNUMXX = FML-NUMBER+VERSION COUNTER) *
934 // * RESET CFOPT; *
935 // * SET CFOPT:ON=15; *
936 // * EXEC CMDFILE:FILE=CG.SA.HMAST; *
937 // *******************************************************
938 /
939 <SKIPCMD:LABEL=BX25;
940 /
941 .RPTX <STEP;
942 /
943 <DELFILE:FILE=PT.X25IND;
944 /
945 .BX25 <STEP;
946 /
947 <TRANSFILE:FILE=CPH.X25/SG.BX25,COPMOD=POST,MODE=CRD;
948 <SKIPCMD:LABEL=RBX25,OFF=32;
949 <SET CFOPT:ON=16,SCOPE=GLOBAL;
950 /

A30808-X3080-C485-5-7620 MMN:SW-COFIP-397
MMN:SW Maintenance
Software

HMAST

951 // **************************
952 // * SG.BX25 FILE NOT SAVED *
953 // *******************************************************
954 // * REASONS CAN BE: 1. FILE NOT EXISTING *
955 // * 2. FILE IS EMPTY (FAULT L FC 33) *
956 // * 3. DESTINATION FILE ALREADY *
957 // * EXISTING (FAULT PARAM L FC 24) *
958 // * IN THESE CASES, ERROR OUTPUT SHOULD BE IGNORED. *
959 // * *
960 // * IN ALL OTHER CASES, THE ERROR SHOULD BE CLEARED *
961 // * AND THE FOLLOWING MML COMMANDS REENTERED: *
962 // * *
963 // * CR FILE:FILE=CPHIND.FMLNUMXX,TYPE=DOUBLE,SIZE=1; *
964 // * (FMLNUMXX = FML-NUMBER+VERSION COUNTER) *
965 // * RESET CFOPT; *
966 // * SET CFOPT:ON=9; *
967 // * EXEC CMDFILE:FILE=CG.SA.HMAST; *
968 // *******************************************************
969 /
970 <SKIPCMD:LABEL=AOUT;
971 /
972 .RBX25 <STEP;
973 /
974 <RELCYCFILE:FILE=SG.BX25;
975 /
976 .AOUT <STEP;
977 /
978 <DISPFILE:FILE=CPH.;
979 <SKIPCMD:LABEL=AEX,ON=32;
980 /
981 <ACT OUTDIV:FILE=PT.DISP,SIZE=20,MODE=CR,ACKIN=ALL,ACKCF=NONE;
982 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
983 <DISP FILE:FILE=CPHIND.;
984 <SET CFOPT:ACKCFS=ERROR,DANCMD=EXEC,ACKREQ=POS,SCOPE=GLOBAL;
985 <DEC OUTDIV;
986 /
987 /
988 // **************************************************
989 // ** AT THIS POINT THE NAMES OF THE HISTORY FILES **
990 // ** ARE CHANGED. THEREFORE THE EDITOR EDTS8 IS **
991 // ** USED. **
992 // ** **
993 // ** THE MESSAGE: ==EDTS8:RANGE NOT FOUND CAN BE **
994 // ** IGNORED, IF IT IS OUTPUT. **
995 // **************************************************
996 /
997 /
998 <EXEC EDTS8;
999 *COMMAND-FILE
1000 *R PT.DISP

MMN:SW-COFIP-398 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

HMAST

1001 *S & CPHIND

1002 *N
1003 *D 1
1004 *N
1005 *D 2:?
1006 *CH & CL 1:7:=’’
1007 *CH & CL 9:?:=’’
1008 *N
1009 *C 1 TO 2
1010 *C 1 TO 3
1011 *C 1 TO 4
1012 *C 1 TO 5
1013 *C 1 TO 6
1014 *C 1 TO 7
1015 *C 1 TO 8
1016 *I 1 CL 1:=’<CMDFILE;’
1017 *CH 1 ’<CMDFILE;’..:=’’
1018 *I 2 CL 1:=’<SET CFOPT:ACKCFS=ERROR,DANCMD=EXEC,ACKREQ=POS;’
1019 *CH 2 ’<SET CFOPT:ACKCFS=ERROR,DANCMD=EXEC,ACKREQ=POS;’..:=’’
1020 *I 3 CL 1:=’<TRANS FILE:FILE=’
1021 *I 3 CL ?:=’./CPH.,MODE=CRD;’
1022 *I 4 CL 1:=’<SET CFOPT:ACKCFS=ALL,SCOPE=LOCAL;’
1023 *CH 4 ’<SET CFOPT:ACKCFS=ALL,SCOPE=LOCAL;’..:=’’
1024 *I 5 CL 1:=’<DISP FILE:FILE=’
1025 *I 5 CL ?:=’.;’
1026 *I 6 CL 1:=’<SET CFOPT:ACKCFS=ERROR,DANCMD=EXEC,ACKREQ=POS;’
1027 *CH 6 ’<SET CFOPT:ACKCFS=ERROR,DANCMD=EXEC,ACKREQ=POS;’..:=’’
1028 *I 7 CL 1:=’<RESETCFOPT;’
1029 *CH 7 ’<RESETCFOPT;’..:=’’
1030 *I 8 CL 1:=’<ENDFILE;’
1031 *CH 8 ’<ENDFILE;’..:=’’
1032 *W CF.CATALOG
1033 *END
1034 /
1035 /
1036 <EXEC CMDFILE:FILE=CF.CATALOG;
1037 /
1038 <DEL FILE:FILE=CF.CATALOG;
1039 <DEL FILE:FILE=PT.DISP;
1040 <DEL FILE:FILE=CPHIND.;
1041 <DEL FILE:FILE=CPH.;
1042 /
1043 /
1044 <SKIP CMD:LABEL=REPT,ON=16;
1045 /
1046 // *******************************
1047 // *** FINISHED WITHOUT FAULTS ***
1048 // *******************************
1049 // *********************************************************
1050 // *** SAVING OF HISTORY FILES FINISHED WITHOUT FAULTS. ***

A30808-X3080-C485-5-7620 MMN:SW-COFIP-399
MMN:SW Maintenance
Software

HMAST

1051 // *** ***

1052 // *** THE HISTORY FILES CONTAINING THE FML-NUMBER ARE ***
1053 // *** READY TO TRANSFER. ***
1054 // *** ***
1055 // *** IF THE LAST TRANSFILE COMMAND WAS NOT CORRECTLY ***
1056 // *** EXECUTED (PARAM L FC 24), HISTORY FILES ALREADY ***
1057 // *** EXIST WITH THIS FML-NUMBER. ***
1058 // *** THE MESSAGE CAN BE IGNORED. ***
1059 // *********************************************************
1060 /
1061 <RESET CFOPT;
1062 <ENDFILE;
1063 /
1064 /
1065 .REPT <STEP;
1066 /
1067 // ****************
1068 // *** FINISHED ***
1069 // ****************
1070 // *******************************************************
1071 // *** SAVING OF THE CHOOSEN HISTORY FILES FINISHED. ***
1072 // *** ***
1073 // *** BUT NOT ALL CHOOSEN HISTORY FILES COULD BE ***
1074 // *** TRANSFERRED. ANALYSE FORMER OUTPUT MESSAGE(S). ***
1075 // *** REASONS CAN BE: ***
1076 // *** ***
1077 // *** 1. FILE(S) NOT EXISTING ***
1078 // *** 2. FILE(S) IS/ARE EMPTY (FAULT FILE L FC 33) ***
1079 // *** 3. DESTINATION FILE(S) ALREADY EXISTING ***
1080 // *** (FAULT PARAM L FC 24) ***
1081 // *** IN THESE CASES, THERE IS NO ERROR. ***
1082 // *** ***
1083 // *** IN ALL OTHER CASES, ANALYSE MESSAGE(S) AND ***
1084 // *** CLEAR OF FAULTS. (SEE ALSO MMN:SW-CP113 SW320). ***
1085 // *******************************************************
1086 /
1087 <RESET CFOPT;
1088 <ENDFILE;
1089 /
1090 .RESTART <STEP;
1091 /
1092 /
1093 // ****************
1094 // *** FAULT 01 ***
1095 // ****************
1096 // **********************************************************
1097 // *** NO FILE CONTAINING THE FML-NUMBER IN ITS NAME ***
1098 // *** WAS CREATED BEFORE THE COMMAND FILE WAS ***
1099 // *** STARTED. ***
1100 // *** ENTER THE FOLLOWING MML COMMAND: ***

MMN:SW-COFIP-400 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

HMAST

1101 // *** CR FILE:FILE=CPHIND.FMLNUMXX,TYPE=DOUBLE,SIZE=1; ***

1102 // *** (FMLNUMXX = FML-NUMBER+VERSION COUNTER) ***
1103 // *** ***
1104 // *** AND START THE SELECTED COMMAND FILE FOR ***
1105 // *** HISTORY FILE SAVING AGAIN. ***
1106 // **********************************************************
1107 /
1108 <RESET CFOPT;
1109 <ENDFILE;
1110 /
1111 .NSET <STEP;
1112 /
1113 // ****************
1114 // *** FAULT 02 ***
1115 // ****************
1116 // *******************************************************
1117 // *** THE COMMAND FILE CG.SA.HMAST WAS STARTED ***
1118 // *** WITHOUT SWITCHES BEING SET. ***
1119 // *** START THE COMMAND FILE CG.SA.XXX FOR THE ***
1120 // *** APPROPRIATE ERROR CLASS OR SET SWITCHES ***
1121 // *** FOR THE DESIRED HISTORY FILES AND START ***
1122 // *** COMMAND FILE CG.SA.HMAST . ***
1123 // *******************************************************
1124 /
1125 <RESET CFOPT;
1126 <ENDFILE;
1127 /
1128 .AEX <STEP;
1129 /
1130 <DEL FILE:FILE=CPHIND.;
1131 /
1132 // ****************
1133 // *** FAULT 03 ***
1134 // ****************
1135 // *******************************************************
1136 // *** NO HISTORY FILE WAS SAVED. ***
1137 // *** PLEASE CHECK THE MESSAGES PRINTOUT DURING ***
1138 // *** COMMAND FILE EXECUTION. ***
1139 // *******************************************************
1140 /
1141 <RESET CFOPT;
1142 <ENDFILE;
1143 /
1144 .AEDT <STEP;
1145 /
1146 <DELFILE:FILE=PT.PATCH;
1147 /
1148 // ****************
1149 // *** FAULT 04 ***
1150 // *****************************************************

A30808-X3080-C485-5-7620 MMN:SW-COFIP-401
MMN:SW Maintenance
Software

HMAST

1151 // *** HISTORY FILES SAVING CANNOT BE EXECUTED, ***

1152 // *** BECAUSE EDTS8 IS NOT AVAILABLE. ***
1153 // *** ***
1154 // *** PLEASE RELEASE EDTS8 AND START HISTORY ***
1155 // *** SAVING COMMANDFILE CG.SA.XXX FOR THE CHOOSEN ***
1156 // *** ERROR CLASSIFICATION OR SET SWITCHES FOR ***
1157 // *** RELEVANT HISTORY FILE AND START CG.SA.HMAST ***
1158 // *** DIRECTLY. ***
1159 // *****************************************************
1160 /
1161 <RESET CFOPT;
1162 <ENDFILE;

MMN:SW-COFIP-402 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

HOSIA

1 <CMDFILE;
2 /
3 // 80-HOSIA-01
4 /
5 /****V01***************************************************************
6 /* *
7 /* COMMAND FILE CG.SA.HOSIA FOR SAVING HISTORY DATA *
8 /* ================================================ *
9 /* *
10 /* TASK DESCRIPTION *
11 /* ---------------- *
12 /* THIS FILE IS USED IN CASE OF ADMINISTRATION PROBLEMS TO COPY *
13 /* HISTORY FILES FOR FAULT ANALYSIS. *
14 /* *
15 /* THE FOLLOWING FILES ARE SAVED: SG.BX25 *
16 /* XF.DOCKET *
17 /* HF.TRANSFILE *
18 /* HF.SMML *
19 /* HF.Q3AS *
20 /* PT.AMTIND *
21 /* PT.X25IND *
22 /* *
23 /* PRESETTINGS: *
24 /* ------------ *
25 /* BEFORE STARTING THE COMMAND FILE THE FML-NUMBER HAS TO BE *
26 /* ANNOUNCED TO THE SYSTEM USING THE FOLLOWING COMMANDS: *
27 /* *
28 /* CR FILE:FILE=CPHIND.FMLNUMXX,TYPE=DOUBLE,SIZE=1; *
29 /* (FMLNUMXX = FML-NUMBER+VERSION COUNTER) *
30 /* *
31 /* FAULT HANDLING: *
32 /* --------------- *
33 /* AFTER INTERRUPTION OF THE FILE PROCESSING VIA FAULT EXITS AND *
34 /* CORRESPONDING FAULT HANDLING THE FILE CAN BE STARTED AGAIN. *
35 /* *
36 /**********************************************************************
37 /
38 <RESET CFOPT;
39 /
40 <SET CFOPT:ACKCFS=ERROR,DANCMD=EXEC,ACKREQ=POS,SCOPE=GLOBAL;
41 /
42 <SET CFOPT:ON=11&15,SCOPE=GLOBAL;
43 /
44 <EXEC CMDFILE:FILE=CG.SA.HMAST;
45 /
46 <RESET CFOPT;
47 /
48 <ENDFILE;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-403
MMN:SW Maintenance
Software

HPERI

1 <CMDFILE;
2 /
3 // 80-HPERI-01
4 /
5 /****V01***************************************************************
6 /* *
7 /* COMMAND FILE CG.SA.HPERI FOR SAVING HISTORY DATA *
8 /* ================================================ *
9 /* *
10 /* TASK DESCRIPTION *
11 /* ---------------- *
12 /* THIS FILE IS USED IN CASE OF PERIPHERAL PROBLEMS TO COPY *
13 /* HISTORY FILES FOR FAULT ANALYSIS. *
14 /* *
15 /* THE FOLLOWING FILES ARE SAVED: SG.OPER *
16 /* HF.ARCHIVE *
17 /* PT.AMTIND *
18 /* *
19 /* PRESETTINGS: *
20 /* ------------ *
21 /* BEFORE STARTING THE COMMAND FILE THE FML-NUMBER HAS TO BE *
22 /* ANNOUNCED TO THE SYSTEM USING THE FOLLOWING COMMANDS: *
23 /* *
24 /* CR FILE:FILE=CPHIND.FMLNUMXX,TYPE=DOUBLE,SIZE=1; *
25 /* (FMLNUMXX = FML-NUMBER+VERSION COUNTER) *
26 /* *
27 /* FAULT HANDLING: *
28 /* --------------- *
29 /* AFTER INTERRUPTION OF THE FILE PROCESSING VIA FAULT EXITS AND *
30 /* CORRESPONDING FAULT HANDLING THE FILE CAN BE STARTED AGAIN. *
31 /* *
32 /**********************************************************************
33 /
34 <RESET CFOPT;
35 /
36 <SET CFOPT:ACKCFS=ERROR,DANCMD=EXEC,ACKREQ=POS,SCOPE=GLOBAL;
37 /
38 <SET CFOPT:ON=2&3&11,SCOPE=GLOBAL;
39 /
40 <EXEC CMDFILE:FILE=CG.SA.HMAST;
41 /
42 <RESET CFOPT;
43 /
44 <ENDFILE;

MMN:SW-COFIP-404 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

HRECO

1 <CMDFILE;
2 /
3 // 80-HRECO-01
4 /
5 /****V01***************************************************************
6 /* *
7 /* COMMAND FILE CG.SA.HRECO FOR SAVING HISTORY DATA *
8 /* ================================================ *
9 /* *
10 /* TASK DESCRIPTION *
11 /* ---------------- *
12 /* THIS FILE IS USED IN CASE OF ADMINISTRATION PROBLEMS TO COPY *
13 /* HISTORY FILES FOR FAULT ANALYSIS. *
14 /* *
15 /* THE FOLLOWING FILES ARE SAVED: SG.SESYMP *
16 /* HF.ARCHIVE *
17 /* HF.MCP.HWERROR *
18 /* DC.VX, DC.BX *
19 /* PT.AMTIND *
20 /* AD.RESTART *
21 /* *
22 /* PRESETTINGS: *
23 /* ------------ *
24 /* BEFORE STARTING THE COMMAND FILE THE FML-NUMBER HAS TO BE *
25 /* ANNOUNCED TO THE SYSTEM USING THE FOLLOWING COMMANDS: *
26 /* *
27 /* CR FILE:FILE=CPHIND.FMLNUMXX,TYPE=DOUBLE,SIZE=1; *
28 /* (FMLNUMXX = FML-NUMBER+VERSION COUNTER) *
29 /* *
30 /* FAULT HANDLING: *
31 /* --------------- *
32 /* AFTER INTERRUPTION OF THE FILE PROCESSING VIA FAULT EXITS AND *
33 /* CORRESPONDING FAULT HANDLING THE FILE CAN BE STARTED AGAIN. *
34 /* *
35 /**********************************************************************
36 /
37 <RESET CFOPT;
38 /
39 <SET CFOPT:ACKCFS=ERROR,DANCMD=EXEC,ACKREQ=POS,SCOPE=GLOBAL;
40 /
41 <SET CFOPT:ON=1&3&4&7&8&11,SCOPE=GLOBAL;
42 /
43 <EXEC CMDFILE:FILE=CG.SA.HMAST;
44 /
45 <RESET CFOPT;
46 /
47 <ENDFILE;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-405
MMN:SW Maintenance
Software

HSONS

1 <CMDFILE;
2 /
3 // 80-HSONS-01
4 /
5 /****V01***************************************************************
6 /* *
7 /* COMMAND FILE CG.SA.HSONS FOR SAVING HISTORY DATA *
8 /* ================================================ *
9 /* *
10 /* TASK DESCRIPTION *
11 /* ---------------- *
12 /* THIS FILE IS USED IN CASE OF NON CLASSIFIED ERRORS TO COPY *
13 /* HISTORY FILES FOR FAULT ANALYSIS. *
14 /* *
15 /* THE FOLLOWING FILES ARE SAVED: SG.SESYMP *
16 /* SG.OPER *
17 /* HF.ARCHIVE *
18 /* HF.MCP.HWERROR *
19 /* DC.VX, DC.BX *
20 /* PT.AMTIND *
21 /* *
22 /* PRESETTINGS: *
23 /* ------------ *
24 /* BEFORE STARTING THE COMMAND FILE THE FML-NUMBER HAS TO BE *
25 /* ANNOUNCED TO THE SYSTEM USING THE FOLLOWING COMMANDS: *
26 /* *
27 /* CR FILE:FILE=CPHIND.FMLNUMXX,TYPE=DOUBLE,SIZE=1; *
28 /* (FMLNUMXX = FML-NUMBER+VERSION COUNTER) *
29 /* *
30 /* FAULT HANDLING: *
31 /* --------------- *
32 /* AFTER INTERRUPTION OF THE FILE PROCESSING VIA FAULT EXITS AND *
33 /* CORRESPONDING FAULT HANDLING THE FILE CAN BE STARTED AGAIN. *
34 /* *
35 /**********************************************************************
36 /
37 <RESET CFOPT;
38 /
39 <SET CFOPT:ACKCFS=ERROR,DANCMD=EXEC,ACKREQ=POS,SCOPE=GLOBAL;
40 /
41 <SET CFOPT:ON=1&2&3&4&8&11,SCOPE=GLOBAL;
42 /
43 <EXEC CMDFILE:FILE=CG.SA.HMAST;
44 /
45 <RESET CFOPT;
46 /
47 <ENDFILE;

MMN:SW-COFIP-406 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

HVTAD

1 <CMDFILE;
2 /
3 // 80-HVTAD-01
4 /
5 /****V01***************************************************************
6 /* *
7 /* COMMAND FILE CG.SA.HVTAD FOR SAVING HISTORY DATA *
8 /* ================================================ *
9 /* *
10 /* TASK DESCRIPTION *
11 /* ---------------- *
12 /* THIS FILE IS USED IN CASE OF PROBLEMS WITH ADMOSS TO COPY *
13 /* HISTORY FILES FOR FAULT ANALYSIS. *
14 /* *
15 /* THE FOLLOWING FILES ARE SAVED: SG.OPER *
16 /* HF.ARCHIVE *
17 /* PT.AMTIND *
18 /* PT.AMOIND *
19 /* *
20 /* PRESETTINGS: *
21 /* ------------ *
22 /* BEFORE STARTING THE COMMAND FILE THE FML-NUMBER HAS TO BE *
23 /* ANNOUNCED TO THE SYSTEM USING THE FOLLOWING COMMANDS: *
24 /* *
25 /* CR FILE:FILE=CPHIND.FMLNUMXX,TYPE=DOUBLE,SIZE=1; *
26 /* (FMLNUMXX = FML-NUMBER+VERSION COUNTER) *
27 /* *
28 /* FAULT HANDLING: *
29 /* --------------- *
30 /* AFTER INTERRUPTION OF THE FILE PROCESSING VIA FAULT EXITS AND *
31 /* CORRESPONDING FAULT HANDLING THE FILE CAN BE STARTED AGAIN. *
32 /* *
33 /**********************************************************************
34 /
35 <RESET CFOPT;
36 /
37 <SET CFOPT:ACKCFS=ERROR,DANCMD=EXEC,ACKREQ=POS,SCOPE=GLOBAL;
38 /
39 <SET CFOPT:ON=2&3&10&11,SCOPE=GLOBAL;
40 /
41 <EXEC CMDFILE:FILE=CG.SA.HMAST;
42 /
43 <RESET CFOPT;
44 /
45 <ENDFILE;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-407
MMN:SW Maintenance
Software

HVTAL

1 <CMDFILE;
2 /
3 // 80-HVTAL-01
4 /
5 /****V01***************************************************************
6 /* *
7 /* COMMAND FILE CG.SA.HVTAL FOR SAVING HISTORY DATA *
8 /* ================================================ *
9 /* *
10 /* TASK DESCRIPTION *
11 /* ---------------- *
12 /* THIS FILE IS USED IN CASE OF GENERAL CALL PROCESSING PROBLEMS TO *
13 /* COPY HISTORY FILES FOR FAULT ANALYSIS. *
14 /* *
15 /* THE FOLLOWING FILES ARE SAVED: SG.SESYMP *
16 /* SG.OPER *
17 /* HF.ARCHIVE *
18 /* PT.AMTIND *
19 /* PT.VTIND *
20 /* *
21 /* PRESETTINGS: *
22 /* ------------ *
23 /* BEFORE STARTING THE COMMAND FILE THE FML-NUMBER HAS TO BE *
24 /* ANNOUNCED TO THE SYSTEM USING THE FOLLOWING COMMANDS: *
25 /* *
26 /* CR FILE:FILE=CPHIND.FMLNUMXX,TYPE=DOUBLE,SIZE=1; *
27 /* (FMLNUMXX = FML-NUMBER+VERSION COUNTER) *
28 /* *
29 /* FAULT HANDLING: *
30 /* --------------- *
31 /* AFTER INTERRUPTION OF THE FILE PROCESSING VIA FAULT EXITS AND *
32 /* CORRESPONDING FAULT HANDLING THE FILE CAN BE STARTED AGAIN. *
33 /* *
34 /**********************************************************************
35 /
36 <RESET CFOPT;
37 /
38 <SET CFOPT:ACKCFS=ERROR,DANCMD=EXEC,ACKREQ=POS,SCOPE=GLOBAL;
39 /
40 <SET CFOPT:ON=1&&3&11&13,SCOPE=GLOBAL;
41 /
42 <EXEC CMDFILE:FILE=CG.SA.HMAST;
43 /
44 <RESET CFOPT;
45 /
46 <ENDFILE;

MMN:SW-COFIP-408 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

LOT01

1 <CMDFILE;
2 /
3 // 80-LOT01-01
4 /
5 /****V01***************************************************************
6 /* *
7 /* COMMAND FILE CG.LT.LOT01 FOR REPLACEMENT OF NON-RESIDENT *
8 /* LIBRARIES *
9 /* ======================================================== *
10 /* *
11 /* TASK DESCRIPTION: *
12 /* ----------------- *
13 /* - CHECK THE POSSIBILITY OF LOADLIB REPLACEMENT BY *
14 /* INSPECTING THE STATUS OF THE SYSTEM *
15 /* *
16 /* PREREQUISITES: *
17 /* -------------- *
18 /* - BOTH MAGNETIC DISKS MUST BE ACTIVE *
19 /* - BOTH SEMILIB FILES MUST BE AVAILABLE FOR UPDATE *
20 /* - COMPLETE SYSTEM REDUNDANCY IS REQUIRED *
21 /* *
22 /* FAULT HANDLING: *
23 /* --------------- *
24 /* - AFTER INTERRUPTION OF THE FILE PROCESSING VIA FAULT *
25 /* EXITS AND CORRESPONDING FAULT HANDLING THE FILE CAN *
26 /* BE STARTED AGAIN *
27 /* *
28 /* SWITCH PRESETTINGS FOR START POINTS AND ENTRY POINTS: *
29 /* ===================================================== *
30 /* START POINT SWITCH PRESETTINGS *
31 /* ----------- ------------------ *
32 /* SETCFOPT:OFF=1&&16; *
33 /* *
34 /**********************************************************************
35 /
36 <SETCFOPT:ACKCFS=ERROR,DANCMD=EXEC,ACKREQ=POS,SCOPE=GLOBAL;
37 /
38 <SKIPCMD:LABEL=END,ON=1;
39 /
40 .M1 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
41 //
42 // ************************************
43 // * CHECKING DISK SPACE AVAILABILITY *
44 // ************************************
45 /
46 <CR FILE:FILE=SPACE.TEST,SIZE=XXXXX,TYPE=DOUBLE;
47 <SKIP CMD:LABEL=AB1,ON=32;
48 <DEL FILE:FILE=SPACE.TEST;
49 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
50 <DISP MD;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-409
MMN:SW Maintenance
Software

LOT01

51 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
52 /
53 .M2 <STEP;
54 //
55 // ********************************
56 // * CHECKING UPDATE AVAILABILITY *
57 // ********************************
58 /
59 <DISP UPDATE;
60 /
61 .M3 <STEP;
62 //
63 // *********************************
64 // * INTERROGATION OF CURRENT JOBS *
65 // *********************************
66 /
67 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
68 <DISP JOB:JN=X;
69 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
70 /
71 .M4 <STEP;
72 //
73 // **************************************
74 // * INTERROGATION OF SYSTEM REDUNDANCY *
75 // **************************************
76 /
77 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
78 <STAT SN;
79 <STAT MB;
80 <STAT CCG;
81 <STAT SYP;
82 <STAT LTG:LTG=X-X;
83 <STAT DLU:DLU=X;
84 /
85 <STAT SSP;
86 /
87 <DISP TSG:SN=X;
88 /
89 <STAT DIU:LTG=X-X,OST=UNA;
90 <STAT CR:LTG=X-X,OST=UNA;
91 /
92 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
93 <DISP MUX;
94 <SKIPCMD:LABEL=OUT,ON=32;
95 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
96 <STAT CCNC:UNIT=CCNP-X;
97 <STAT CCNC:UNIT=MUXM-X;
98 <DISP C7LINK:LINKNO=X;
99 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
100 /

MMN:SW-COFIP-410 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

LOT01

101 <SKIPCMD:LABEL=OUT;
102 / *******************************
103 / * FAULT EXITS AND END MESSAGE *
104 / *******************************
105 /
106 .AB1 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
107 <DISP MD;
108 <DISP FILE;
109 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
110 // ****************
111 // *** FAULT 01 ***
112 // ****************
113 // *********************************************
114 // *** NOT ENOUGH SPACE ON DISKS AVAILABLE ***
115 // *** DELETE DISPENSABLE FILES, ***
116 // *** START COMMAND FILE CG.LT.LOT01 AGAIN. ***
117 // *********************************************
118 /
119 <SETCFOPT:OFF=1&&11,SCOPE=GLOBAL;
120 <SKIPCMD:LABEL=END;
121 /
122 .OUT <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
123 /
124 // *******************************
125 // *** FINISHED WITHOUT FAULTS ***
126 // *******************************
127 // ***************************************************
128 // *** CHECK JOB AND CONFIGURATION LISTS, ***
129 // *** DELETE RUNNING NONRESIDENT PROCESSES ***
130 // *** (EXCEPT SETLOG), ***
131 // *** IF NECESSARY MAKE SEMILIB FILES ***
132 // *** AVAILABLE FOR UPDATE, ***
133 // *** IF NECESSARY CREATE REQUIRED CONFIGURATION. ***
134 // *** CONTINUE WITH PROCEDURE. ***
135 // ***************************************************
136 /
137 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
138 /
139 .END <SETCFOPT:ACKCFS=ERROR,DANCMD=NOEXEC,ACKREQ=NEG,SCOPE=GLOBAL;
140 <ENDFILE;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-411
MMN:SW Maintenance
Software

LOT02

1 <CMDFILE;
2 /
3 // 80-LOT02-01
4 /
5 /****V01***************************************************************
6 /* *
7 /* COMMAND FILE CG.LT.LOT02 FOR REPLACEMENT OF NON-RESIDENT *
8 /* LIBRARIES *
9 /* ======================================================== *
10 /* *
11 /* TASK DESCRIPTION: *
12 /* ----------------- *
13 /* - POSTPROCESSING AFTER LOADLIB REPLACEMENT *
14 /* *
15 /* FAULT HANDLING: *
16 /* --------------- *
17 /* - AFTER INTERRUPTION OF THE FILE PROCESSING VIA FAULT *
18 /* EXITS AND CORRESPONDING FAULT HANDLING THE FILE CAN *
19 /* BE STARTED AGAIN *
20 /* *
21 /* SWITCH PRESETTINGS FOR START POINTS AND ENTRY POINTS: *
22 /* ===================================================== *
23 /* START POINT SWITCH PRESETTINGS *
24 /* ----------- ------------------ *
25 /* SETCFOPT:OFF=1&&16; *
26 /* *
27 /**********************************************************************
28 /
29 <SETCFOPT:ACKCFS=ERROR,DANCMD=EXEC,ACKREQ=POS,SCOPE=GLOBAL;
30 /
31 <SKIPCMD:LABEL=END,ON=1;
32 /
33 .M0 <STEP;
34 /
35 / <ACT FNS:FNS=SY;
36 / <ACT FNS:FNS=KS;
37 /
38 .M1 <STEP;
39 <DISP FILE:FILE=IA.;
40 <SKIPCMD:LABEL=M2,ON=32;
41 /
42 //
43 // ***************************
44 // * DISK SAVING OF AMA DATA *
45 // ***************************
46 /
47 .T1 <DISP FILE:FILE=IA.ICAMA;
48 <SKIPCMD:LABEL=T2,ON=32;
49 <TRANS BUFFER:TYPE=AMA;
50 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;

MMN:SW-COFIP-412 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

LOT02

51 <DISP FILE:FILE=IA.ICAMA,ALL;
52 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
53 /
54 .T2 <DISP FILE:FILE=IA.ICMAL;
55 <SKIPCMD:LABEL=T3,ON=32;
56 <TRANS BUFFER:TYPE=MAL;
57 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
58 <DISP FILE:FILE=IA.ICMAL,ALL;
59 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
60 /
61 .T3 <DISP FILE:FILE=IA.ICDNB;
62 <SKIPCMD:LABEL=T4,ON=32;
63 <TRANS BUFFER:TYPE=DNOB;
64 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
65 <DISP FILE:FILE=IA.ICDNB,ALL;
66 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
67 /
68 .T4 <DISP FILE:FILE=IA.ICMOB;
69 <SKIPCMD:LABEL=T5,ON=32;
70 <TRANS BUFFER:TYPE=MOB;
71 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
72 <DISP FILE:FILE=IA.ICMOB,ALL;
73 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
74 /
75 .T5 <DISP FILE:FILE=IA.ICPMB;
76 <SKIPCMD:LABEL=T6,ON=32;
77 <TRANS BUFFER:TYPE=PMOB;
78 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
79 <DISP FILE:FILE=IA.ICPMB,ALL;
80 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
81 /
82 .T6 <DISP FILE:FILE=IA.ICTOB;
83 <SKIPCMD:LABEL=T7,ON=32;
84 <TRANS BUFFER:TYPE=TOB;
85 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
86 <DISP FILE:FILE=IA.ICTOB,ALL;
87 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
88 /
89 .T7 <DISP FILE:FILE=IA.ICTST;
90 <SKIPCMD:LABEL=T8,ON=32;
91 <TRANS BUFFER:TYPE=TST;
92 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
93 <DISP FILE:FILE=IA.ICTST,ALL;
94 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
95 /
96 .T8 <DISP FILE:FILE=IA.ICIAR;
97 <SKIPCMD:LABEL=T9,ON=32;
98 <TRANS BUFFER:TYPE=IARA;
99 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
100 <DISP FILE:FILE=IA.ICIAR,ALL;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-413
MMN:SW Maintenance
Software

LOT02

101 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
102 /
103 .T9 <DISP FILE:FILE=IA.ICFIR;
104 <SKIPCMD:LABEL=TA,ON=32;
105 <TRANS BUFFER:TYPE=FIR;
106 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
107 <DISP FILE:FILE=IA.ICFIR,ALL;
108 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
109 /
110 .TA <DISP FILE:FILE=IA.ICINA;
111 <SKIPCMD:LABEL=M2,ON=32;
112 <TRANS BUFFER:TYPE=INA;
113 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
114 <DISP FILE:FILE=IA.ICINA,ALL;
115 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
116 /
117 .M2 <STEP;
118 /
119 <DISP FILE:FILE=CA.;
120 <SKIPCMD:LABEL=M4,ON=32;
121 /
122 .M3 <STEP;
123 //
124 // ******************************
125 // * DISK SAVING OF METER FILES *
126 // ******************************
127 /
128 <SAVE MET;
129 <SKIPCMD:LABEL=AB1,ON=32;
130 /
131 .M4 <STEP;
132 //
133 // ******************************************
134 // * DISPLAYING FILES OF CURRENT GENERATION *
135 // ******************************************
136 /
137 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
138 <DISP FILE:FILE=SY.;
139 <DISP GEN:DISPL=FILES;
140 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
141 /
142 <SKIPCMD:LABEL=OUT;
143 /
144 / *******************************
145 / * FAULT EXITS AND END MESSAGE *
146 / *******************************
147 /
148 .AB1 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
149 // ****************
150 // *** FAULT 01 ***

MMN:SW-COFIP-414 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

LOT02

151 // ****************
152 // ***********************************************
153 // *** DISK SAVING OF METER FILES NOT EXECUTED ***
154 // *** CHECK PREREQUISITES, ELIMINATE FAULTS, ***
155 // *** START COMMAND FILE CG.LT.LOT02 AGAIN. ***
156 // ***********************************************
157 /
158 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
159 <SKIPCMD:LABEL=END;
160 /
161 .OUT <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
162 /
163 // *******************************
164 // *** FINISHED WITHOUT FAULTS ***
165 // *******************************
166 // ********************************
167 // *** CONTINUE WITH PROCEDURE. ***
168 // ********************************
169 /
170 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
171 <SKIPCMD:LABEL=END;
172 /
173 .END <SETCFOPT:ACKCFS=ERROR,DANCMD=NOEXEC,ACKREQ=NEG,SCOPE=GLOBAL;
174 <ENDFILE;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-415
MMN:SW Maintenance
Software

LOT03

1 <CMDFILE;
2 /
3 // 80-LOT03-01
4 /
5 /****V01***************************************************************
6 /* *
7 /* COMMAND FILE CG.LT.LOT03 FOR REPLACEMENT OF NON-RESIDENT *
8 /* LIBRARIES *
9 /* ======================================================== *
10 /* *
11 /* TASK DESCRIPTION: *
12 /* ----------------- *
13 /* - EXECUTION OF SYSTEM STATUS CHECKS *
14 /* *
15 /* PREREQUISITES: *
16 /* -------------- *
17 /* - BOTH MAGNETIC DISKS MUST BE ACTIVE *
18 /* - BOTH SEMILIB FILES MUST BE AVAILABLE FOR UPDATE *
19 /* - COMPLETE SYSTEM REDUNDANCY IS REQUIRED *
20 /* *
21 /* FAULT HANDLING: *
22 /* --------------- *
23 /* - AFTER INTERRUPTION OF THE FILE PROCESSING VIA FAULT *
24 /* EXITS AND CORRESPONDING FAULT HANDLING THE FILE CAN *
25 /* BE STARTED AGAIN *
26 /* *
27 /* SWITCH PRESETTINGS FOR START POINTS AND ENTRY POINTS: *
28 /* ===================================================== *
29 /* START POINT SWITCH PRESETTINGS *
30 /* ----------- ------------------ *
31 /* SETCFOPT:OFF=1&&16; *
32 /* *
33 /**********************************************************************
34 /
35 <SETCFOPT:ACKCFS=ERROR,DANCMD=EXEC,ACKREQ=POS,SCOPE=GLOBAL;
36 /
37 <SKIPCMD:LABEL=END,ON=1;
38 /
39 .M1 <STEP;
40 //
41 // ********************************
42 // * CHECKING UPDATE AVAILABILITY *
43 // ********************************
44 /
45 <DISP UPDATE;
46 /
47 .M2 <STEP;
48 //
49 // **************************************
50 // * INTERROGATION OF SYSTEM REDUNDANCY *

MMN:SW-COFIP-416 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

LOT03

51 // **************************************
52 /
53 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
54 <STAT SN;
55 <STAT MB;
56 <STAT CCG;
57 <STAT SYP;
58 <STAT LTG:LTG=X-X;
59 <STAT DLU:DLU=X;
60 /
61 <STAT SSP;
62 /
63 <DISP TSG:SN=X;
64 /
65 <STAT DIU:LTG=X-X,OST=UNA;
66 <STAT CR:LTG=X-X,OST=UNA;
67 /
68 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
69 <DISP MUX;
70 <SKIPCMD:LABEL=OUT,ON=32;
71 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
72 <STAT CCNC:UNIT=CCNP-X;
73 <STAT CCNC:UNIT=MUXM-X;
74 <DISP C7LINK:LINKNO=X;
75 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
76 /
77 .OUT <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
78 /
79 // *******************************
80 // *** FINISHED WITHOUT FAULTS ***
81 // *******************************
82 // ***************************************************
83 // *** CHECK INTERROGATION RESULTS, ***
84 // *** IF NECESSARY MAKE SEMILIB FILES AVAILABLE ***
85 // *** FOR UPDATE, ***
86 // *** IF NECESSARY CREATE REQUIRED CONFIGURATION. ***
87 // *** CONTINUE WITH PROCEDURE. ***
88 // ***************************************************
89 /
90 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
91 /
92 .END <SETCFOPT:ACKCFS=ERROR,DANCMD=NOEXEC,ACKREQ=NEG,SCOPE=GLOBAL;
93 <ENDFILE;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-417
MMN:SW Maintenance
Software

PSW01

1 <CMDFILE;
2 /
3 // 80-PSW01-01
4 /
5 /****V01***************************************************************
6 /* *
7 /* COMMAND FILE CG.PS.PSW01 FOR EXCHANGE OF PSW FILES *
8 /* ================================================== *
9 /* *
10 /* TASK DESCRIPTION: *
11 /* ----------------- *
12 /* - CHECK THE POSSIBILITY OF EXCHANGE OF PSW FILES BY *
13 /* INSPECTING THE STATUS OF THE SYSTEM *
14 /* *
15 /* PREREQUISITES: *
16 /* -------------- *
17 /* - BOTH MAGNETIC DISKS MUST BE ACTIVE *
18 /* - BOTH SEMILIB FILES MUST BE AVAILABLE FOR UPDATE *
19 /* - COMPLETE SYSTEM REDUNDANCY IS REQUIRED *
20 /* *
21 /* FAULT HANDLING: *
22 /* --------------- *
23 /* - AFTER INTERRUPTION OF THE FILE PROCESSING VIA FAULT *
24 /* EXITS AND CORRESPONDING FAULT HANDLING THE FILE CAN *
25 /* BE STARTED AGAIN *
26 /* *
27 /* SWITCH PRESETTINGS FOR START POINTS AND ENTRY POINTS: *
28 /* ===================================================== *
29 /* START POINT SWITCH PRESETTINGS *
30 /* ----------- ------------------ *
31 /* SETCFOPT:OFF=1&&16; *
32 /* *
33 /**********************************************************************
34 /
35 <SETCFOPT:ACKCFS=ERROR,DANCMD=EXEC,ACKREQ=POS,SCOPE=GLOBAL;
36 /
37 <SKIPCMD:LABEL=END,ON=1;
38 /
39 .M1 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
40 //
41 // ************************************
42 // * CHECKING DISK SPACE AVAILABILITY *
43 // ************************************
44 /
45 <CR FILE:FILE=SPACE.TEST,SIZE=XXXXX,TYPE=DOUBLE;
46 <SKIP CMD:LABEL=AB1,ON=32;
47 <DEL FILE:FILE=SPACE.TEST;
48 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
49 <DISP MD;
50 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;

MMN:SW-COFIP-418 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

PSW01

51 /
52 .M2 <STEP;
53 //
54 // ********************************
55 // * CHECKING UPDATE AVAILABILITY *
56 // ********************************
57 /
58 <DISP UPDATE;
59 /
60 .M3 <STEP;
61 //
62 // *********************************
63 // * INTERROGATION OF CURRENT JOBS *
64 // *********************************
65 /
66 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
67 <DISP JOB:JN=X;
68 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
69 /
70 .M4 <STEP;
71 //
72 // **************************************
73 // * INTERROGATION OF SYSTEM REDUNDANCY *
74 // **************************************
75 /
76 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
77 <STAT SN;
78 <STAT MB;
79 <STAT CCG;
80 <STAT SYP;
81 <STAT LTG:LTG=X-X;
82 <STAT DLU:DLU=X;
83 /
84 <STAT SSP;
85 /
86 <DISP TSG:SN=X;
87 /
88 <STAT DIU:LTG=X-X,OST=UNA;
89 <STAT CR:LTG=X-X,OST=UNA;
90 /
91 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
92 <DISP MUX;
93 <SKIPCMD:LABEL=OUT,ON=32;
94 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
95 <STAT CCNC:UNIT=CCNP-X;
96 <STAT CCNC:UNIT=MUXM-X;
97 <DISP C7LINK:LINKNO=X;
98 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
99 /
100 <SKIPCMD:LABEL=OUT;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-419
MMN:SW Maintenance
Software

PSW01

101 / *******************************
102 / * FAULT EXITS AND END MESSAGE *
103 / *******************************
104 /
105 .AB1 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
106 <DISP MD;
107 <DISP FILE;
108 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
109 // ****************
110 // *** FAULT 01 ***
111 // ****************
112 // *********************************************
113 // *** NOT ENOUGH SPACE ON DISKS AVAILABLE ***
114 // *** DELETE DISPENSABLE FILES, ***
115 // *** START COMMAND FILE CG.PS.PSW01 AGAIN. ***
116 // *********************************************
117 /
118 <SETCFOPT:OFF=1&&11,SCOPE=GLOBAL;
119 <SKIPCMD:LABEL=END;
120 /
121 .OUT <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
122 /
123 // *******************************
124 // *** FINISHED WITHOUT FAULTS ***
125 // *******************************
126 // ***************************************************
127 // *** CHECK JOB AND CONFIGURATION LISTS, ***
128 // *** DELETE RUNNING NONRESIDENT PROCESSES ***
129 // *** (EXCEPT SETLOG), ***
130 // *** IF NECESSARY MAKE SEMILIB FILES ***
131 // *** AVAILABLE FOR UPDATE, ***
132 // *** IF NECESSARY CREATE REQUIRED CONFIGURATION. ***
133 // *** CONTINUE WITH PROCEDURE. ***
134 // ***************************************************
135 /
136 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
137 /
138 .END <SETCFOPT:ACKCFS=ERROR,DANCMD=NOEXEC,ACKREQ=NEG,SCOPE=GLOBAL;
139 <ENDFILE;

MMN:SW-COFIP-420 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

PSW02

1 <CMDFILE;
2 /
3 // 80-PSW02-01
4 /
5 /****V01***************************************************************
6 /* *
7 /* COMMAND FILE CG.PS.PSW02 FOR EXCHANGE OF PSW FILES *
8 /* ================================================== *
9 /* *
10 /* TASK DESCRIPTION: *
11 /* ----------------- *
12 /* - POSTPROCESSING AFTER EXCHANGE OF PSW FILES *
13 /* *
14 /* FAULT HANDLING: *
15 /* --------------- *
16 /* - AFTER INTERRUPTION OF THE FILE PROCESSING VIA FAULT *
17 /* EXITS AND CORRESPONDING FAULT HANDLING THE FILE CAN *
18 /* BE STARTED AGAIN *
19 /* *
20 /* SWITCH PRESETTINGS FOR START POINTS AND ENTRY POINTS: *
21 /* ===================================================== *
22 /* START POINT SWITCH PRESETTINGS *
23 /* ----------- ------------------ *
24 /* SETCFOPT:OFF=1&&16; *
25 /* *
26 /**********************************************************************
27 /
28 <SETCFOPT:ACKCFS=ERROR,DANCMD=EXEC,ACKREQ=POS,SCOPE=GLOBAL;
29 /
30 <SKIPCMD:LABEL=END,ON=1;
31 /
32 .M0 <STEP;
33 /
34 / <ACT FNS:FNS=SY;
35 / <ACT FNS:FNS=KS;
36 /
37 .M1 <STEP;
38 <DISP FILE:FILE=IA.;
39 <SKIPCMD:LABEL=M2,ON=32;
40 /
41 //
42 // ***************************
43 // * DISK SAVING OF AMA DATA *
44 // ***************************
45 /
46 .T1 <DISP FILE:FILE=IA.ICAMA;
47 <SKIPCMD:LABEL=T2,ON=32;
48 <TRANS BUFFER:TYPE=AMA;
49 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
50 <DISP FILE:FILE=IA.ICAMA,ALL;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-421
MMN:SW Maintenance
Software

PSW02

51 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
52 /
53 .T2 <DISP FILE:FILE=IA.ICMAL;
54 <SKIPCMD:LABEL=T3,ON=32;
55 <TRANS BUFFER:TYPE=MAL;
56 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
57 <DISP FILE:FILE=IA.ICMAL,ALL;
58 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
59 /
60 .T3 <DISP FILE:FILE=IA.ICDNB;
61 <SKIPCMD:LABEL=T4,ON=32;
62 <TRANS BUFFER:TYPE=DNOB;
63 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
64 <DISP FILE:FILE=IA.ICDNB,ALL;
65 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
66 /
67 .T4 <DISP FILE:FILE=IA.ICMOB;
68 <SKIPCMD:LABEL=T5,ON=32;
69 <TRANS BUFFER:TYPE=MOB;
70 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
71 <DISP FILE:FILE=IA.ICMOB,ALL;
72 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
73 /
74 .T5 <DISP FILE:FILE=IA.ICPMB;
75 <SKIPCMD:LABEL=T6,ON=32;
76 <TRANS BUFFER:TYPE=PMOB;
77 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
78 <DISP FILE:FILE=IA.ICPMB,ALL;
79 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
80 /
81 .T6 <DISP FILE:FILE=IA.ICTOB;
82 <SKIPCMD:LABEL=T7,ON=32;
83 <TRANS BUFFER:TYPE=TOB;
84 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
85 <DISP FILE:FILE=IA.ICTOB,ALL;
86 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
87 /
88 .T7 <DISP FILE:FILE=IA.ICTST;
89 <SKIPCMD:LABEL=T8,ON=32;
90 <TRANS BUFFER:TYPE=TST;
91 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
92 <DISP FILE:FILE=IA.ICTST,ALL;
93 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
94 /
95 .T8 <DISP FILE:FILE=IA.ICIAR;
96 <SKIPCMD:LABEL=T9,ON=32;
97 <TRANS BUFFER:TYPE=IARA;
98 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
99 <DISP FILE:FILE=IA.ICIAR,ALL;
100 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;

MMN:SW-COFIP-422 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

PSW02

101 /
102 .T9 <DISP FILE:FILE=IA.ICFIR;
103 <SKIPCMD:LABEL=TA,ON=32;
104 <TRANS BUFFER:TYPE=FIR;
105 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
106 <DISP FILE:FILE=IA.ICFIR,ALL;
107 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
108 /
109 .TA <DISP FILE:FILE=IA.ICINA;
110 <SKIPCMD:LABEL=M2,ON=32;
111 <TRANS BUFFER:TYPE=INA;
112 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
113 <DISP FILE:FILE=IA.ICINA,ALL;
114 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
115 /
116 .M2 <STEP;
117 /
118 <DISP FILE:FILE=CA.;
119 <SKIPCMD:LABEL=M4,ON=32;
120 /
121 .M3 <STEP;
122 //
123 // ******************************
124 // * DISK SAVING OF METER FILES *
125 // ******************************
126 /
127 <SAVE MET:FUNC=FALLBACK;
128 <SKIPCMD:LABEL=AB1,ON=32;
129 /
130 .M4 <STEP;
131 //
132 // ******************************************
133 // * DISPLAYING FILES OF CURRENT GENERATION *
134 // ******************************************
135 /
136 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
137 <DISP FILE:FILE=SY.;
138 <DISP GEN:DISPL=FILES;
139 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
140 /
141 <SKIPCMD:LABEL=OUT;
142 /
143 / *******************************
144 / * FAULT EXITS AND END MESSAGE *
145 / *******************************
146 /
147 .AB1 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
148 // ****************
149 // *** FAULT 01 ***
150 // ****************

A30808-X3080-C485-5-7620 MMN:SW-COFIP-423
MMN:SW Maintenance
Software

PSW02

151 // ***********************************************
152 // *** DISK SAVING OF METER FILES NOT EXECUTED ***
153 // *** CHECK PREREQUISITES, ELIMINATE FAULTS, ***
154 // *** START COMMAND FILE CG.PS.PSW02 AGAIN. ***
155 // ***********************************************
156 /
157 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
158 <SKIPCMD:LABEL=END;
159 /
160 .OUT <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
161 /
162 // *******************************
163 // *** FINISHED WITHOUT FAULTS ***
164 // *******************************
165 // ********************************
166 // *** CONTINUE WITH PROCEDURE. ***
167 // ********************************
168 /
169 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
170 <SKIPCMD:LABEL=END;
171 /
172 .END <SETCFOPT:ACKCFS=ERROR,DANCMD=NOEXEC,ACKREQ=NEG,SCOPE=GLOBAL;
173 <ENDFILE;

MMN:SW-COFIP-424 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

PSW03

1 <CMDFILE;
2 /
3 // 80-PSW03-01
4 /
5 /****V01***************************************************************
6 /* *
7 /* COMMAND FILE CG.PS.PSW03 FOR EXCHANGE OF PSW FILES *
8 /* ================================================== *
9 /* *
10 /* TASK DESCRIPTION: *
11 /* ----------------- *
12 /* - EXECUTION OF SYSTEM STATUS CHECKS *
13 /* *
14 /* PREREQUISITES: *
15 /* -------------- *
16 /* - BOTH MAGNETIC DISKS MUST BE ACTIVE *
17 /* - BOTH SEMILIB FILES MUST BE AVAILABLE FOR UPDATE *
18 /* - COMPLETE SYSTEM REDUNDANCY IS REQUIRED *
19 /* *
20 /* FAULT HANDLING: *
21 /* --------------- *
22 /* - AFTER INTERRUPTION OF THE FILE PROCESSING VIA FAULT *
23 /* EXITS AND CORRESPONDING FAULT HANDLING THE FILE CAN *
24 /* BE STARTED AGAIN *
25 /* *
26 /* SWITCH PRESETTINGS FOR START POINTS AND ENTRY POINTS: *
27 /* ===================================================== *
28 /* START POINT SWITCH PRESETTINGS *
29 /* ----------- ------------------ *
30 /* SETCFOPT:OFF=1&&16; *
31 /* *
32 /**********************************************************************
33 /
34 <SETCFOPT:ACKCFS=ERROR,DANCMD=EXEC,ACKREQ=POS,SCOPE=GLOBAL;
35 /
36 <SKIPCMD:LABEL=END,ON=1;
37 /
38 .M1 <STEP;
39 //
40 // ********************************
41 // * CHECKING UPDATE AVAILABILITY *
42 // ********************************
43 /
44 <DISP UPDATE;
45 /
46 .M2 <STEP;
47 //
48 // **************************************
49 // * INTERROGATION OF SYSTEM REDUNDANCY *
50 // **************************************

A30808-X3080-C485-5-7620 MMN:SW-COFIP-425
MMN:SW Maintenance
Software

PSW03

51 /
52 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
53 <STAT SN;
54 <STAT MB;
55 <STAT CCG;
56 <STAT SYP;
57 <STAT LTG:LTG=X-X;
58 <STAT DLU:DLU=X;
59 /
60 <STAT SSP;
61 /
62 <DISP TSG:SN=X;
63 /
64 <STAT DIU:LTG=X-X,OST=UNA;
65 <STAT CR:LTG=X-X,OST=UNA;
66 /
67 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
68 <DISP MUX;
69 <SKIPCMD:LABEL=OUT,ON=32;
70 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
71 <STAT CCNC:UNIT=CCNP-X;
72 <STAT CCNC:UNIT=MUXM-X;
73 <DISP C7LINK:LINKNO=X;
74 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
75 /
76 .OUT <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
77 /
78 // *******************************
79 // *** FINISHED WITHOUT FAULTS ***
80 // *******************************
81 // ***************************************************
82 // *** CHECK INTERROGATION RESULTS, ***
83 // *** IF NECESSARY MAKE SEMILIB FILES AVAILABLE ***
84 // *** FOR UPDATE, ***
85 // *** IF NECESSARY CREATE REQUIRED CONFIGURATION. ***
86 // *** CONTINUE WITH PROCEDURE. ***
87 // ***************************************************
88 /
89 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
90 /
91 .END <SETCFOPT:ACKCFS=ERROR,DANCMD=NOEXEC,ACKREQ=NEG,SCOPE=GLOBAL;
92 <ENDFILE;

MMN:SW-COFIP-426 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

PSW04

1 <CMDFILE;
2 /
3 // 80-PSW04-01
4 /
5 /****V01***************************************************************
6 /* *
7 /* COMMAND FILE CG.PS.PSW04 FOR EXCHANGE OF PSW FILES *
8 /* ================================================== *
9 /* *
10 /* TASK DESCRIPTION: *
11 /* ----------------- *
12 /* SAVING OF DATA AREAS. *
13 /* *
14 /* FAULT HANDLING: *
15 /* --------------- *
16 /* AFTER INTERRUPTION OF THE FILE PROCESSING VIA FAULT *
17 /* EXITS AND CORRESPONDING FAULT HANDLING THE FILE CAN *
18 /* BE STARTED AGAIN *
19 /* *
20 /* SWITCH PRESETTINGS FOR START POINTS AND ENTRY POINTS: *
21 /* ===================================================== *
22 /* START POINT SWITCH PRESETTINGS *
23 /* ----------- ------------------ *
24 /* SETCFOPT:OFF=1&&16; *
25 /* *
26 /**********************************************************************
27 /
28 <SETCFOPT:ACKCFS=ERROR,DANCMD=EXEC,ACKREQ=POS,SCOPE=GLOBAL;
29 /
30 <SKIPCMD:LABEL=END,ON=1;
31 /
32 .M0 <STEP;
33 /
34 / <ACT FNS:FNS=SY;
35 / <ACT FNS:FNS=KS;
36 /
37 .M1 <STEP;
38 <DISP FILE:FILE=IA.;
39 <SKIPCMD:LABEL=M2,ON=32;
40 /
41 //
42 // ***************************
43 // * DISK SAVING OF AMA DATA *
44 // ***************************
45 /
46 .T1 <DISP FILE:FILE=IA.ICAMA;
47 <SKIPCMD:LABEL=T2,ON=32;
48 <TRANS BUFFER:TYPE=AMA;
49 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
50 <DISP FILE:FILE=IA.ICAMA,ALL;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-427
MMN:SW Maintenance
Software

PSW04

51 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
52 /
53 .T2 <DISP FILE:FILE=IA.ICMAL;
54 <SKIPCMD:LABEL=T3,ON=32;
55 <TRANS BUFFER:TYPE=MAL;
56 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
57 <DISP FILE:FILE=IA.ICMAL,ALL;
58 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
59 /
60 .T3 <DISP FILE:FILE=IA.ICDNB;
61 <SKIPCMD:LABEL=T4,ON=32;
62 <TRANS BUFFER:TYPE=DNOB;
63 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
64 <DISP FILE:FILE=IA.ICDNB,ALL;
65 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
66 /
67 .T4 <DISP FILE:FILE=IA.ICMOB;
68 <SKIPCMD:LABEL=T5,ON=32;
69 <TRANS BUFFER:TYPE=MOB;
70 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
71 <DISP FILE:FILE=IA.ICMOB,ALL;
72 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
73 /
74 .T5 <DISP FILE:FILE=IA.ICPMB;
75 <SKIPCMD:LABEL=T6,ON=32;
76 <TRANS BUFFER:TYPE=PMOB;
77 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
78 <DISP FILE:FILE=IA.ICPMB,ALL;
79 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
80 /
81 .T6 <DISP FILE:FILE=IA.ICTOB;
82 <SKIPCMD:LABEL=T7,ON=32;
83 <TRANS BUFFER:TYPE=TOB;
84 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
85 <DISP FILE:FILE=IA.ICTOB,ALL;
86 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
87 /
88 .T7 <DISP FILE:FILE=IA.ICTST;
89 <SKIPCMD:LABEL=T8,ON=32;
90 <TRANS BUFFER:TYPE=TST;
91 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
92 <DISP FILE:FILE=IA.ICTST,ALL;
93 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
94 /
95 .T8 <DISP FILE:FILE=IA.ICIAR;
96 <SKIPCMD:LABEL=T9,ON=32;
97 <TRANS BUFFER:TYPE=IARA;
98 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
99 <DISP FILE:FILE=IA.ICIAR,ALL;
100 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;

MMN:SW-COFIP-428 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

PSW04

101 /
102 .T9 <DISP FILE:FILE=IA.ICFIR;
103 <SKIPCMD:LABEL=TA,ON=32;
104 <TRANS BUFFER:TYPE=FIR;
105 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
106 <DISP FILE:FILE=IA.ICFIR,ALL;
107 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
108 /
109 .TA <DISP FILE:FILE=IA.ICINA;
110 <SKIPCMD:LABEL=M2,ON=32;
111 <TRANS BUFFER:TYPE=INA;
112 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
113 <DISP FILE:FILE=IA.ICINA,ALL;
114 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
115 /
116 .M2 <STEP;
117 /
118 <DISP FILE:FILE=CA.;
119 <SKIPCMD:LABEL=OUT,ON=32;
120 /
121 .M3 <STEP;
122 //
123 // ******************************
124 // * DISK SAVING OF METER FILES *
125 // ******************************
126 /
127 <SAVE MET;
128 <SKIPCMD:LABEL=AB1,ON=32;
129 /
130 <SKIPCMD:LABEL=OUT;
131 /
132 / *******************************
133 / * FAULT EXITS AND END MESSAGE *
134 / *******************************
135 /
136 .AB1 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
137 // ****************
138 // *** FAULT 01 ***
139 // ****************
140 // ***********************************************
141 // *** DISK SAVING OF METER FILES NOT EXECUTED ***
142 // *** CHECK PREREQUISITES, ELIMINATE FAULTS, ***
143 // *** START COMMAND FILE CG.PS.PSW04 AGAIN. ***
144 // ***********************************************
145 /
146 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
147 <SKIPCMD:LABEL=END;
148 /
149 .OUT <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
150 /

A30808-X3080-C485-5-7620 MMN:SW-COFIP-429
MMN:SW Maintenance
Software

PSW04

151 // *******************************
152 // *** FINISHED WITHOUT FAULTS ***
153 // *******************************
154 // ********************************
155 // *** CONTINUE WITH PROCEDURE. ***
156 // ********************************
157 /
158 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
159 <SKIPCMD:LABEL=END;
160 /
161 .END <SETCFOPT:ACKCFS=ERROR,DANCMD=NOEXEC,ACKREQ=NEG,SCOPE=GLOBAL;
162 <ENDFILE;

MMN:SW-COFIP-430 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

EXP01

1 <CMDFILE;
2 /
3 // 80-EXP01-01
4 /
5 /****V01***************************************************************
6 /* *
7 /* COMMAND FILE CG.EP.EXP01 FOR APS EXPANSION *
8 /* ========================================== *
9 /* *
10 /* TASK DESCRIPTION: *
11 /* ----------------- *
12 /* CHECK IF THE STATUS OF THE SYSTEM ALLOWS TO PERFORM *
13 /* AN APS EXPANSION. *
14 /* *
15 /* PREREQUISITES: *
16 /* -------------- *
17 /* BOTH MAGNETIC DISKS MUST BE ACTIVE *
18 /* BOTH SEMILIB FILES MUST BE AVAILABLE FOR UPDATE *
19 /* COMPLETE SYSTEM REDUNDANCY IS REQUIRED *
20 /* *
21 /* FAULT HANDLING: *
22 /* --------------- *
23 /* AFTER INTERRUPTION OF THE FILE PROCESSING VIA FAULT *
24 /* EXITS AND CORRESPONDING FAULT HANDLING THE FILE CAN *
25 /* BE STARTED AGAIN *
26 /* *
27 /* SWITCH PRESETTINGS FOR START POINTS AND ENTRY POINTS: *
28 /* ===================================================== *
29 /* START POINT SWITCH PRESETTINGS *
30 /* ----------- ------------------ *
31 /* SETCFOPT:OFF=1&&16; *
32 /* *
33 /**********************************************************************
34 /
35 <SETCFOPT:ACKCFS=ERROR,DANCMD=EXEC,ACKREQ=POS,SCOPE=GLOBAL;
36 /
37 <SKIPCMD:LABEL=END,ON=1;
38 /
39 .M1 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
40 //
41 // ************************************
42 // * CHECKING DISK SPACE AVAILABILITY *
43 // ************************************
44 /
45 <CR FILE:FILE=SPACE.TEST,SIZE=XXXXX,TYPE=DOUBLE;
46 <SKIP CMD:LABEL=AB1,ON=32;
47 <DEL FILE:FILE=SPACE.TEST;
48 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
49 <DISP MD;
50 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-431
MMN:SW Maintenance
Software

EXP01

51 /
52 .M2 <STEP;
53 //
54 // ********************************
55 // * CHECKING UPDATE AVAILABILITY *
56 // ********************************
57 /
58 <DISP UPDATE;
59 /
60 .M3 <STEP;
61 //
62 // *********************************
63 // * INTERROGATION OF CURRENT JOBS *
64 // *********************************
65 /
66 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
67 <DISP JOB:JN=X;
68 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
69 /
70 .M4 <STEP;
71 //
72 // **************************************
73 // * INTERROGATION OF SYSTEM REDUNDANCY *
74 // **************************************
75 /
76 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
77 <STAT SN;
78 <STAT MB;
79 <STAT CCG;
80 <STAT SYP;
81 <STAT LTG:LTG=X-X;
82 <STAT DLU:DLU=X;
83 /
84 <STAT SSP;
85 /
86 <DISP TSG:SN=X;
87 /
88 <STAT DIU:LTG=X-X,OST=UNA;
89 <STAT CR:LTG=X-X,OST=UNA;
90 /
91 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
92 <DISP MUX;
93 <SKIPCMD:LABEL=M5,ON=32;
94 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
95 <STAT CCNC:UNIT=CCNP-X;
96 <STAT CCNC:UNIT=MUXM-X;
97 <DISP C7LINK:LINKNO=X;
98 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
99 /
100 .M5 <STEP;

MMN:SW-COFIP-432 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

EXP01

101 //
102 // **********************************************
103 // * DISPLAYING FILES OF THE CURRENT GENERATION *
104 // **********************************************
105 /
106 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
107 <DISP FILE;
108 <DISP GEN:DISPL=LIST;
109 <DISP GEN:DISPL=FILES;
110 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
111 /
112 .M6 <STEP;
113 //
114 // *****************************************************
115 // * DISPLAYING THE CURRENT SIZE OF THE DATABASE AREAS *
116 // *****************************************************
117 /
118 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
119 <DISP DBSIZE:DPUSED=YES;
120 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
121 /
122 <SKIPCMD:LABEL=OUT;
123 / *******************************
124 / * FAULT EXITS AND END MESSAGE *
125 / *******************************
126 /
127 .AB1 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
128 <DISP MD;
129 <DISP FILE;
130 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
131 // ****************
132 // *** FAULT 01 ***
133 // ****************
134 // *********************************************
135 // *** NOT ENOUGH SPACE ON DISKS AVAILABLE ***
136 // *** DELETE DISPENSABLE FILES, ***
137 // *** START COMMAND FILE CG.EP.EXP01 AGAIN. ***
138 // *********************************************
139 /
140 <SETCFOPT:OFF=1&&11,SCOPE=GLOBAL;
141 <SKIPCMD:LABEL=END;
142 /
143 .OUT <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
144 /
145 // *******************************
146 // *** FINISHED WITHOUT FAULTS ***
147 // *******************************
148 // ***************************************************
149 // *** CHECK JOB AND CONFIGURATION LISTS, ***
150 // *** DELETE RUNNING NONRESIDENT PROCESSES ***

A30808-X3080-C485-5-7620 MMN:SW-COFIP-433
MMN:SW Maintenance
Software

EXP01

151 // *** (EXCEPT SETLOG), ***

152 // *** IF NECESSARY MAKE SEMILIB FILES ***
153 // *** AVAILABLE FOR UPDATE, ***
154 // *** IF NECESSARY CREATE REQUIRED CONFIGURATION. ***
155 // *** CONTINUE WITH PROCEDURE. ***
156 // ***************************************************
157 /
158 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
159 /
160 .END <SETCFOPT:ACKCFS=ERROR,DANCMD=NOEXEC,ACKREQ=NEG,SCOPE=GLOBAL;
161 <ENDFILE;

MMN:SW-COFIP-434 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

EXP02

1 <CMDFILE;
2 /
3 // 80-EXP02-01
4 /
5 /****V01***************************************************************
6 /* *
7 /* COMMAND FILE CG.EP.EXP02 FOR APS EXPANSION *
8 /* ========================================== *
9 /* *
10 /* TASK DESCRIPTION: *
11 /* ----------------- *
12 /* SAVING OF DATA AREAS. *
13 /* *
14 /* FAULT HANDLING: *
15 /* --------------- *
16 /* AFTER INTERRUPTION OF THE FILE PROCESSING VIA FAULT *
17 /* EXITS AND CORRESPONDING FAULT HANDLING THE FILE CAN *
18 /* BE STARTED AGAIN *
19 /* *
20 /* SWITCH PRESETTINGS FOR START POINTS AND ENTRY POINTS: *
21 /* ===================================================== *
22 /* START POINT SWITCH PRESETTINGS *
23 /* ----------- ------------------ *
24 /* SETCFOPT:OFF=1&&16; *
25 /* *
26 /**********************************************************************
27 /
28 <SETCFOPT:ACKCFS=ERROR,DANCMD=EXEC,ACKREQ=POS,SCOPE=GLOBAL;
29 /
30 <SKIPCMD:LABEL=END,ON=1;
31 /
32 .M0 <STEP;
33 /
34 / <ACT FNS:FNS=SY;
35 / <ACT FNS:FNS=KS;
36 /
37 .M1 <STEP;
38 <DISP FILE:FILE=IA.;
39 <SKIPCMD:LABEL=M2,ON=32;
40 /
41 //
42 // ***************************
43 // * DISK SAVING OF AMA DATA *
44 // ***************************
45 /
46 .T1 <DISP FILE:FILE=IA.ICAMA;
47 <SKIPCMD:LABEL=T2,ON=32;
48 <TRANS BUFFER:TYPE=AMA;
49 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
50 <DISP FILE:FILE=IA.ICAMA,ALL;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-435
MMN:SW Maintenance
Software

EXP02

51 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
52 /
53 .T2 <DISP FILE:FILE=IA.ICMAL;
54 <SKIPCMD:LABEL=T3,ON=32;
55 <TRANS BUFFER:TYPE=MAL;
56 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
57 <DISP FILE:FILE=IA.ICMAL,ALL;
58 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
59 /
60 .T3 <DISP FILE:FILE=IA.ICDNB;
61 <SKIPCMD:LABEL=T4,ON=32;
62 <TRANS BUFFER:TYPE=DNOB;
63 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
64 <DISP FILE:FILE=IA.ICDNB,ALL;
65 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
66 /
67 .T4 <DISP FILE:FILE=IA.ICMOB;
68 <SKIPCMD:LABEL=T5,ON=32;
69 <TRANS BUFFER:TYPE=MOB;
70 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
71 <DISP FILE:FILE=IA.ICMOB,ALL;
72 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
73 /
74 .T5 <DISP FILE:FILE=IA.ICPMB;
75 <SKIPCMD:LABEL=T6,ON=32;
76 <TRANS BUFFER:TYPE=PMOB;
77 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
78 <DISP FILE:FILE=IA.ICPMB,ALL;
79 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
80 /
81 .T6 <DISP FILE:FILE=IA.ICTOB;
82 <SKIPCMD:LABEL=T7,ON=32;
83 <TRANS BUFFER:TYPE=TOB;
84 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
85 <DISP FILE:FILE=IA.ICTOB,ALL;
86 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
87 /
88 .T7 <DISP FILE:FILE=IA.ICTST;
89 <SKIPCMD:LABEL=T8,ON=32;
90 <TRANS BUFFER:TYPE=TST;
91 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
92 <DISP FILE:FILE=IA.ICTST,ALL;
93 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
94 /
95 .T8 <DISP FILE:FILE=IA.ICIAR;
96 <SKIPCMD:LABEL=T9,ON=32;
97 <TRANS BUFFER:TYPE=IARA;
98 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
99 <DISP FILE:FILE=IA.ICIAR,ALL;
100 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;

MMN:SW-COFIP-436 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

EXP02

101 /
102 .T9 <DISP FILE:FILE=IA.ICFIR;
103 <SKIPCMD:LABEL=TA,ON=32;
104 <TRANS BUFFER:TYPE=FIR;
105 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
106 <DISP FILE:FILE=IA.ICFIR,ALL;
107 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
108 /
109 .TA <DISP FILE:FILE=IA.ICINA;
110 <SKIPCMD:LABEL=M2,ON=32;
111 <TRANS BUFFER:TYPE=INA;
112 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
113 <DISP FILE:FILE=IA.ICINA,ALL;
114 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
115 /
116 .M2 <STEP;
117 /
118 <DISP FILE:FILE=CA.;
119 <SKIPCMD:LABEL=OUT,ON=32;
120 /
121 .M3 <STEP;
122 //
123 // ******************************
124 // * DISK SAVING OF METER FILES *
125 // ******************************
126 /
127 <SAVE MET;
128 <SKIPCMD:LABEL=AB1,ON=32;
129 /
130 <SKIPCMD:LABEL=OUT;
131 /
132 / *******************************
133 / * FAULT EXITS AND END MESSAGE *
134 / *******************************
135 /
136 .AB1 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
137 // ****************
138 // *** FAULT 01 ***
139 // ****************
140 // ***********************************************
141 // *** DISK SAVING OF METER FILES NOT EXECUTED ***
142 // *** CHECK PREREQUISITES, ELIMINATE FAULTS, ***
143 // *** START COMMAND FILE CG.EP.EXP02 AGAIN. ***
144 // ***********************************************
145 /
146 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
147 <SKIPCMD:LABEL=END;
148 /
149 .OUT <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
150 /

A30808-X3080-C485-5-7620 MMN:SW-COFIP-437
MMN:SW Maintenance
Software

EXP02

151 // *******************************
152 // *** FINISHED WITHOUT FAULTS ***
153 // *******************************
154 // ********************************
155 // *** CONTINUE WITH PROCEDURE. ***
156 // ********************************
157 /
158 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
159 <SKIPCMD:LABEL=END;
160 /
161 .END <SETCFOPT:ACKCFS=ERROR,DANCMD=NOEXEC,ACKREQ=NEG,SCOPE=GLOBAL;
162 <ENDFILE;

MMN:SW-COFIP-438 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

EXP04

1 <CMDFILE;
2 /
3 // 80-EXP04-01
4 /
5 /****V01***************************************************************
6 /* *
7 /* COMMAND FILE CG.EP.EXP04 FOR APS EXPANSION *
8 /* ========================================== *
9 /* *
10 /* TASK DESCRIPTION: *
11 /* ----------------- *
12 /* CHECKING THE STATUS OF THE SYSTEM. *
13 /* *
14 /* PREREQUISITES: *
15 /* -------------- *
16 /* BOTH MAGNETIC DISKS MUST BE ACTIVE *
17 /* BOTH SEMILIB FILES MUST BE AVAILABLE FOR UPDATE *
18 /* COMPLETE SYSTEM REDUNDANCY IS REQUIRED *
19 /* *
20 /* FAULT HANDLING: *
21 /* --------------- *
22 /* AFTER INTERRUPTION OF THE FILE PROCESSING VIA FAULT *
23 /* EXITS AND CORRESPONDING FAULT HANDLING THE FILE CAN *
24 /* BE STARTED AGAIN *
25 /* *
26 /* SWITCH PRESETTINGS FOR START POINTS AND ENTRY POINTS: *
27 /* ===================================================== *
28 /* START POINT SWITCH PRESETTINGS *
29 /* ----------- ------------------ *
30 /* SETCFOPT:OFF=1&&16; *
31 /* *
32 /**********************************************************************
33 /
34 <SETCFOPT:ACKCFS=ERROR,DANCMD=EXEC,ACKREQ=POS,SCOPE=GLOBAL;
35 /
36 <SKIPCMD:LABEL=END,ON=1;
37 /
38 .M1 <STEP;
39 //
40 // ********************************
41 // * CHECKING UPDATE AVAILABILITY *
42 // ********************************
43 /
44 <DISP UPDATE;
45 /
46 .M2 <STEP;
47 //
48 // ******************************************
49 // * DISPLAYING FILES OF THE NEW GENERATION *
50 // ******************************************

A30808-X3080-C485-5-7620 MMN:SW-COFIP-439
MMN:SW Maintenance
Software

EXP04

51 /
52 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
53 <DISP FILE;
54 <DISP GEN:DISPL=LIST;
55 <DISP GEN:DISPL=FILES;
56 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
57 /
58 .M3 <STEP;
59 //
60 // *****************************************************
61 // * DISPLAYING THE CURRENT SIZE OF THE DATABASE AREAS *
62 // *****************************************************
63 /
64 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
65 <DISP DBSIZE:DPUSED=YES;
66 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
67 /
68 .M4 <STEP;
69 //
70 // **************************************
71 // * INTERROGATION OF SYSTEM REDUNDANCY *
72 // **************************************
73 /
74 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
75 <STAT SN;
76 <STAT MB;
77 <STAT CCG;
78 <STAT SYP;
79 <STAT LTG:LTG=X-X;
80 <STAT DLU:DLU=X;
81 /
82 <STAT SSP;
83 /
84 <DISP TSG:SN=X;
85 /
86 <STAT DIU:LTG=X-X,OST=UNA;
87 <STAT CR:LTG=X-X,OST=UNA;
88 /
89 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
90 <DISP MUX;
91 <SKIPCMD:LABEL=OUT,ON=32;
92 <SETCFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
93 <STAT CCNC:UNIT=CCNP-X;
94 <STAT CCNC:UNIT=MUXM-X;
95 <DISP C7LINK:LINKNO=X;
96 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
97 /
98 .OUT <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
99 /
100 // *******************************

MMN:SW-COFIP-440 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

EXP04

101 // *** FINISHED WITHOUT FAULTS ***

102 // *******************************
103 // ***************************************************
104 // *** CHECK INTERROGATION RESULTS, ***
105 // *** IF NECESSARY CREATE REQUIRED CONFIGURATION. ***
106 // *** CONTINUE WITH PROCEDURE. ***
107 // ***************************************************
108 /
109 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
110 /
111 .END <SETCFOPT:ACKCFS=ERROR,DANCMD=NOEXEC,ACKREQ=NEG,SCOPE=GLOBAL;
112 <ENDFILE;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-441
MMN:SW Maintenance
Software

TELE1

1 <CMDFILE;
2 /
3 // 80-TELE1-01
4 /
5 /****V01***************************************************************
6 /* *
7 /* COMMAND FILE CG.SA.TELE1 FOR SETTING UP THE X25LINK USED FOR *
8 /* ============================================================ *
9 /* THE TELETAC SERVICE *
10 /* =================== *
11 /* *
12 /* TASK DESCRIPTION: *
13 /* ----------------- *
14 /* SETTING UP X25LINK NUMBER 6 FOR TELETAC SERVICE *
15 /* *
16 /* NOTE : IF ANOTHER X25LINK SHOULD BE USED FOR THE TELETAC *
17 /* SERVICE, THE PARAMETERS ARE TO BE CHANGED *
18 /* ACCORDINGLY *
19 /* *
20 /* SWITCH PRESETTINGS FOR START POINTS AND ENTRY POINTS: *
21 /* ===================================================== *
22 /* START POINT SWITCH PRESETTINGS *
23 /* ----------- ------------------ *
24 /* RESET CFOPT; *
25 /* *
26 /**********************************************************************
27 /
28 <SETCFOPT:ACKCFS=ERROR,DANCMD=EXEC,ACKREQ=POS,SCOPE=GLOBAL;
29 /
30 <SKIPCMD:LABEL=M1,ON=1;
31 <SKIPCMD:LABEL=M2,ON=2;
32 /
33 .M1 <STEP;
34 /
35 <DISP X25LINK:X25LINK=6;
36 <SKIPCMD:LABEL=M2,OFF=32;
37 /
38 // ******************************************
39 // * CREATE X25LINK (CHANNEL 6) FOR TELETAC *
40 // ******************************************
41 /
42 <CR X25LINK:X25LINK=6,LAU=3,CHAN=0,NET=X25LC,PRTCL=X25,L1BAUD=B64000,
43 #L1DTT=DTE,L1IF=V36,L1MCA=1,
44 #L2DTT=DCE,L2LAM=RESPON,L2N1=135,L2N2=7,
45 #L3DTT=DCE,L3T25=150,L3TCB=36&&85;
46 /
47 <SKIPCMD:LABEL=AB1,ON=32;
48 /
49 <SKIPCMD:LABEL=M3,OFF=32;
50 /

MMN:SW-COFIP-442 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

TELE1

51 .M2 <STEP;
52 /
53 // ******************************************
54 // * MODIFY X25LINK (CHANNEL 6) FOR TELETAC *
55 // ******************************************
56 /
57 <MOD X25LINK:X25LINK=6,NET=X25LC,PRTCL=X25,L1BAUD=B64000,
58 #L1DTT=DTE,L1IF=V36,L1MCA=1,
59 #L2DTT=DCE,L2LAM=RESPON,L2N1=135,L2N2=7,
60 #L3DTT=DCE,L3T25=150,L3TCB=36&&85;
61 /
62 <SKIPCMD:LABEL=AB2,ON=32;
63 /
64 .M3 <STEP;
65 /
66 // *******************************
67 // * DISPLAY X25LINK (CHANNEL 6) *
68 // *******************************
69 /
70 <SET CFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
71 /
72 <DISP X25LINK:X25LINK=6;
73 /
74 <SET CFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
75 /
76 /
77 <SKIPCMD:LABEL=OUT;
78 /
79 / *******************************
80 / * FAULT EXITS AND END MESSAGE *
81 / *******************************
82 /
83 .AB1 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
84 /
85 // ****************
86 // *** FAULT 01 ***
87 // ****************
88 //
89 // ********************************************************
90 // *** CREATION OF X25LINK FOR TELETAC SERVICE ***
91 // *** WAS NOT EXECUTED. ***
92 // *** ***
93 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
94 // *** ***
95 // *** START COMMAND FILE CG.SA.TELE1 AGAIN. ***
96 // ********************************************************
97 /
98 <SETCFOPT:OFF=2&&9,ON=1,SCOPE=GLOBAL;
99 <SKIPCMD:LABEL=END;
100 /

A30808-X3080-C485-5-7620 MMN:SW-COFIP-443
MMN:SW Maintenance
Software

TELE1

101 .AB2 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;

102 /
103 // ****************
104 // *** FAULT 02 ***
105 // ****************
106 //
107 // ********************************************************
108 // *** MODIFICATION OF X25LINK FOR TELETAC SERVICE ***
109 // *** WAS NOT EXECUTED. ***
110 // *** ***
111 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
112 // *** ***
113 // *** START COMMAND FILE CG.SA.TELE1 AGAIN. ***
114 // ********************************************************
115 /
116 <SETCFOPT:OFF=1&3&&9,ON=2,SCOPE=GLOBAL;
117 <SKIPCMD:LABEL=END;
118 /
119 /
120 /
121 .OUT <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
122 /
123 // *******************************
124 // *** FINISHED WITHOUT FAULTS ***
125 // *******************************
126 //
127 // *******************************************
128 // *** ***
129 // *** X25LINK FOR TELETAC SERVICE WAS ***
130 // *** SUCCESSFULLY SET UP. ***
131 // *** ***
132 // *******************************************
133 /
134 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;
135 <SKIPCMD:LABEL=END;
136 /
137 .END <SETCFOPT:ACKCFS=ERROR,DANCMD=NOEXEC,ACKREQ=NEG,SCOPE=GLOBAL;
138 <ENDFILE;

MMN:SW-COFIP-444 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

TELE2

1 <CMDFILE;
2 /
3 // 80-TELE2-01
4 /
5 /****V01***************************************************************
6 /* *
7 /* COMMAND FILE CG.SA.TELE2 FOR SETTING UP THE X25LINK USED FOR *
8 /* ============================================================ *
9 /* THE TELETAC SERVICE *
10 /* =================== *
11 /* *
12 /* TASK DESCRIPTION: *
13 /* ----------------- *
14 /* - CREATE REMOTE PROCESSOR (TACPC) *
15 /* *
16 /* *
17 /* - CREATE LOCAL AND REMOTE OSI ADDRESSES *
18 /* *
19 /* SWITCH SETTINGS: *
20 /* ---------------- *
21 /* ON=12 -> LOCAL ADDRESS FOR DIALG IS NOT CREATED *
22 /* ON=14 -> LOCAL ADDRESS FOR NEABD IS NOT CREATED *
23 /* *
24 /* - CREATE LOCAL AND REMOTE APPLICATIONS *
25 /* *
26 /* SWITCH SETTINGS: *
27 /* ---------------- *
28 /* ON=13 -> LOCAL APPLICATION DIALG IS NOT CREATED *
29 /* ON=15 -> LOCAL APPLICATION NEABD IS NOT CREATED *
30 /* *
31 /* - CREATE LOCAL AND REMOTE DTE *
32 /* *
33 /* - CREATE LOCAL AND REMOTE X25ROUTE *
34 /* *
35 /* NOTE: *
36 /* ----- *
37 /* THE VARIABLES IN THE COMMAND FILE ARE TO BE SUBSTITUTED *
38 /* BY THE CURRENT VALUES USING THE EDTS8. *
39 /* *
40 /* SWITCH PRESETTINGS FOR START POINTS AND ENTRY POINTS: *
41 /* ===================================================== *
42 /* START POINT SWITCH PRESETTINGS *
43 /* ----------- ------------------ *
44 /* RESET CFOPT; *
45 /* *
46 /* ENTRY POINT: SWITCH PRESETTINGS *
47 /* ------------ ------------------ *
48 /* M1 SET CFOPT:ON=1,OFF=2&&11,SCOPE=GLOBAL; *
49 /* M2 SET CFOPT:ON=2,OFF=1&3&&11,SCOPE=GLOBAL; *
50 /* M3 SET CFOPT:ON=3,OFF=1&2&4&&11,SCOPE=GLOBAL; *

A30808-X3080-C485-5-7620 MMN:SW-COFIP-445
MMN:SW Maintenance
Software

TELE2

51 /* M4 SET CFOPT:ON=4,OFF=1&&3&5&&11,SCOPE=GLOBAL; *
52 /* M5 SET CFOPT:ON=5,OFF=1&&4&6&&11,SCOPE=GLOBAL; *
53 /* M6 SET CFOPT:ON=6,OFF=1&&5&7&&11,SCOPE=GLOBAL; *
54 /* M7 SET CFOPT:ON=7,OFF=1&&6&8&&11,SCOPE=GLOBAL; *
55 /* M8 SET CFOPT:ON=8,OFF=1&&7&9&&11,SCOPE=GLOBAL; *
56 /* M9 SET CFOPT:ON=9,OFF=1&&8&10&11,SCOPE=GLOBAL; *
57 /* *
58 /* FAULT 1 SET CFOPT:ON=1,OFF=2&&11,SCOPE=GLOBAL; *
59 /* FAULT 2.1 SET CFOPT:ON=2,OFF=1&3&&11,SCOPE=GLOBAL; *
60 /* FAULT 2.2 SET CFOPT:ON=2&11,OFF=1&3&&10,SCOPE=GLOBAL; *
61 /* FAULT 3.1 SET CFOPT:ON=3,OFF=1&2&4&&11,SCOPE=GLOBAL; *
62 /* FAULT 3.2 SET CFOPT:ON=3&11,OFF=1&2&4&&10,SCOPE=GLOBAL; *
63 /* FAULT 4.1 SET CFOPT:ON=4,OFF=1&&3&5&&11,SCOPE=GLOBAL; *
64 /* FAULT 4.2 SET CFOPT:ON=4&11,OFF=1&&3&5&&10,SCOPE=GLOBAL; *
65 /* FAULT 5.1 SET CFOPT:ON=5,OFF=1&&4&6&&11,SCOPE=GLOBAL; *
66 /* FAULT 5.2 SET CFOPT:ON=5&11,OFF=1&&4&6&&10,SCOPE=GLOBAL; *
67 /* FAULT 6 SET CFOPT:ON=6,OFF=1&&5&7&&11,SCOPE=GLOBAL; *
68 /* FAULT 7 SET CFOPT:ON=7,OFF=1&&6&8&&11,SCOPE=GLOBAL; *
69 /* FAULT 8 SET CFOPT:ON=8,OFF=1&&7&9&&11,SCOPE=GLOBAL; *
70 /* FAULT 9 SET CFOPT:ON=9,OFF=1&&8&10&11,SCOPE=GLOBAL; *
71 /* *
72 /**********************************************************************
73 /
74 <SETCFOPT:ACKCFS=ERROR,DANCMD=EXEC,ACKREQ=POS,SCOPE=GLOBAL;
75 /
76 <SKIPCMD:LABEL=M1,ON=1;
77 <SKIPCMD:LABEL=M2,ON=2;
78 <SKIPCMD:LABEL=M3,ON=3;
79 <SKIPCMD:LABEL=M4,ON=4;
80 <SKIPCMD:LABEL=M5,ON=5;
81 <SKIPCMD:LABEL=M6,ON=6;
82 <SKIPCMD:LABEL=M7,ON=7;
83 <SKIPCMD:LABEL=M8,ON=8;
84 <SKIPCMD:LABEL=M9,ON=9;
85 /
86 /
87 /
88 .M1 <STEP;
89 /
90 // *************************************
91 // * CREATING REMOTE PROCESSOR (TACPC) *
92 // *************************************
93 /
94 <CR PRO:PRONAM="<TACPC>",PROTYP=OMTS;
95 /
96 <SKIPCMD:LABEL=AB1,ON=32;
97 /
98 // *****************************************
99 // * REMOTE PROCESSOR SUCCESSFULLY CREATED *
100 // *****************************************

MMN:SW-COFIP-446 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

TELE2

101 /
102 .M2 <STEP;
103 /
104 // ********************************
105 // * CREATING LOCAL OSI ADDRESSES *
106 // ********************************
107 /
108 <SKIPCMD:LABEL=T22,ON=12;
109 <SKIPCMD:LABEL=T22,ON=2&11;
110 /
111 .T21 <STEP;
112 /
113 // **********
114 // * DIALOG *
115 // **********
116 /
117 <CR OSIADR:ADRNAM=<LOCAL1>,NSADR=48-0-11,NET=X25LC;
118 <SKIPCMD:LABEL=AB21,ON=32;
119 /
120 .T22 <STEP;
121 /
122 <SKIPCMD:LABEL=T23,ON=14;
123 /
124 // ****************
125 // * FILETRANSFER *
126 // ****************
127 /
128 <CR OSIADR:ADRNAM=<LOCAL2>,NSADR=48-0-12,NET=X25LC;
129 <SKIPCMD:LABEL=AB22,ON=32;
130 /
131 .T23 <STEP;
132 /
133 // ********************************************
134 // * LOCAL OSI ADDRESSES SUCCESSFULLY CREATED *
135 // ********************************************
136 /
137 .M3 <STEP;
138 /
139 // *********************************
140 // * CREATING REMOTE OSI ADDRESSES *
141 // *********************************
142 /
143 <SKIPCMD:LABEL=T32,ON=3&11;
144 /
145 .T31 <STEP;
146 /
147 // **********
148 // * DIALOG *
149 // **********
150 /

A30808-X3080-C485-5-7620 MMN:SW-COFIP-447
MMN:SW Maintenance
Software

TELE2

151 <CR OSIADR:ADRNAM=<REMOTE1>,NSADR=48-0-33,LOCADR=<LOCAL1>,NET=X25LC;

152 <SKIPCMD:LABEL=AB31,ON=32;
153 /
154 .T32 <STEP;
155 /
156 // ****************
157 // * FILETRANSFER *
158 // ****************
159 /
160 <CR OSIADR:ADRNAM=<REMOTE2>,NSADR=48-0-34,LOCADR=<LOCAL2>,NET=X25LC;
161 <SKIPCMD:LABEL=AB32,ON=32;
162 /
163 // *********************************************
164 // * REMOTE OSI ADDRESSES SUCCESSFULLY CREATED *
165 // *********************************************
166 /
167 .M4 <STEP;
168 /
169 // *******************************
170 // * CREATING LOCAL APPLICATIONS *
171 // *******************************
172 /
173 <SKIPCMD:LABEL=T42,ON=13;
174 <SKIPCMD:LABEL=T42,ON=4&11;
175 /
176 .T41 <STEP;
177 /
178 // **********
179 // * DIALOG *
180 // **********
181 /
182 <CR APPL:APPLID=DIALG,PRONAM="<CPNAME>",ADRNAM=<LOCAL1>;
183 <SKIPCMD:LABEL=AB41,ON=32;
184 /
185 .T42 <STEP;
186 /
187 <SKIPCMD:LABEL=T43,ON=15;
188 /
189 // ****************
190 // * FILETRANSFER *
191 // ****************
192 /
193 <CR APPL:APPLID=NEABD,PRONAM="<CPNAME>",ADRNAM=<LOCAL2>;
194 <SKIPCMD:LABEL=AB42,ON=32;
195 /
196 .T43 <STEP;
197 /
198 // *******************************************
199 // * LOCAL APPLICATIONS SUCCESSFULLY CREATED *
200 // *******************************************

MMN:SW-COFIP-448 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

TELE2

201 /
202 .M5 <STEP;
203 /
204 // ********************************
205 // * CREATING REMOTE APPLICATIONS *
206 // ********************************
207 /
208 <SKIPCMD:LABEL=T52,ON=5&11;
209 /
210 .T51 <STEP;
211 /
212 // **********
213 // * DIALOG *
214 // **********
215 /
216 <CR APPL:APPLID=DIALG,PRONAM="<TACPC>",ADRNAM=<REMOTE1>,AUT=1;
217 <SKIPCMD:LABEL=AB51,ON=32;
218 /
219 .T52 <STEP;
220 /
221 // ****************
222 // * FILETRANSFER *
223 // ****************
224 /
225 <CR APPL:APPLID=NEABD,PRONAM="<TACPC>",ADRNAM=<REMOTE2>,AUT=1;
226 <SKIPCMD:LABEL=AB52,ON=32;
227 /
228 // ********************************************
229 // * REMOTE APPLICATIONS SUCCESSFULLY CREATED *
230 // ********************************************
231 /
232 .M6 <STEP;
233 /
234 // **************************
235 // * CREATING LOCAL X25 DTE *
236 // **************************
237 /
238 <CR X25DTE:DTENAM=<TELEDTE>,ADRNAM=<LOCAL1>&<LOCAL2>,NET=X25LC;
239 <SKIPCMD:LABEL=AB6,ON=32;
240 /
241 // **************************************
242 // * LOCAL X25 DTE SUCCESSFULLY CREATED *
243 // **************************************
244 /
245 .M7 <STEP;
246 /
247 // ***************************
248 // * CREATING REMOTE X25 DTE *
249 // ***************************
250 /

A30808-X3080-C485-5-7620 MMN:SW-COFIP-449
MMN:SW Maintenance
Software

TELE2

251 <CR X25DTE:DTENAM=<TACDTE>,ADRNAM=<REMOTE1>&<REMOTE2>,NET=X25LC,

252 #FACIL=AEFIN&AEFOUT;
253 /
254 <SKIPCMD:LABEL=AB7,ON=32;
255 /
256 // ***************************************
257 // * REMOTE X25 DTE SUCCESSFULLY CREATED *
258 // ***************************************
259 /
260 .M8 <STEP;
261 /
262 // ****************************
263 // * CREATING LOCAL X25 ROUTE *
264 // ****************************
265 /
266 <CR X25ROUTE:ROUTNAM=<TELEROUT>,DTENAM=<TELEDTE>,
267 #X25LINK=6,DTEADR=11111111;
268 /
269 <SKIPCMD:LABEL=AB8,ON=32;
270 /
271 // ****************************************
272 // * LOCAL X25 ROUTE SUCCESSFULLY CREATED *
273 // ****************************************
274 /
275 .M9 <STEP;
276 /
277 // *****************************
278 // * CREATING REMOTE X25 ROUTE *
279 // *****************************
280 /
281 <CR X25ROUTE:ROUTNAM=<TACROUT>,DTENAM=<TACDTE>,
282 #X25LINK=6,DTEADR=33333333;
283 /
284 <SKIPCMD:LABEL=AB9,ON=32;
285 /
286 // *****************************************
287 // * REMOTE X25 ROUTE SUCCESSFULLY CREATED *
288 // *****************************************
289 /
290 .M10 <STEP;
291 /
292 // ***********************************************
293 // * DISPLAY PROCESSOR AND LINK DATABASE ENTRIES *
294 // ***********************************************
295 /
296 <SET CFOPT:ACKCFS=ALL,SCOPE=GLOBAL;
297 /
298 <DISP PRO:PRONAM=X;
299 <DISP OSIADR:ADRNAM=X;
300 <DISP APPL:APPLID=X;

MMN:SW-COFIP-450 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

TELE2

301 <DISP X25DTE:TYPE=LOCAL;

302 <DISP X25DTE:TYPE=REMOTE;
303 <DISP X25ROUTE:ROUTNAM=X;
304 /
305 <SET CFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
306 /
307 /
308 <SKIPCMD:LABEL=OUT;
309 /
310 / *******************************
311 / * FAULT EXITS AND END MESSAGE *
312 / *******************************
313 /
314 .AB1 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
315 /
316 // ***************
317 // *** FAULT 1 ***
318 // ***************
319 //
320 // ********************************************************
321 // *** CREATING REMOTE PROCESSOR "TACPC" NOT EXECUTED. ***
322 // *** ***
323 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
324 // *** ***
325 // *** START COMMAND FILE CG.SA.TELE2 AGAIN. ***
326 // ********************************************************
327 /
328 <SETCFOPT:OFF=2&&11,ON=1,SCOPE=GLOBAL;
329 <SKIPCMD:LABEL=END;
330 /
331 .AB21 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
332 /
333 // *****************
334 // *** FAULT 2.1 ***
335 // *****************
336 //
337 // ********************************************************
338 // *** LOCAL OSI ADDRESS FOR DIALG NOT CREATED. ***
339 // *** ***
340 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
341 // *** ***
342 // *** START COMMAND FILE CG.SA.TELE2 AGAIN. ***
343 // ********************************************************
344 /
345 <SETCFOPT:OFF=1&3&&11,ON=2,SCOPE=GLOBAL;
346 <SKIPCMD:LABEL=END;
347 /
348 .AB22 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
349 /
350 // *****************

A30808-X3080-C485-5-7620 MMN:SW-COFIP-451
MMN:SW Maintenance
Software

TELE2

351 // *** FAULT 2.2 ***

352 // *****************
353 //
354 // ********************************************************
355 // *** LOCAL OSI ADDRESS FOR NEABD NOT CREATED. ***
356 // *** ***
357 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
358 // *** ***
359 // *** START COMMAND FILE CG.SA.TELE2 AGAIN. ***
360 // ********************************************************
361 /
362 <SETCFOPT:OFF=1&3&&10,ON=2&11,SCOPE=GLOBAL;
363 <SKIPCMD:LABEL=END;
364 /
365 .AB31 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
366 /
367 // *****************
368 // *** FAULT 3.1 ***
369 // *****************
370 //
371 // ********************************************************
372 // *** REMOTE OSI ADDRESS FOR DIALG NOT CREATED. ***
373 // *** ***
374 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
375 // *** ***
376 // *** START COMMAND FILE CG.SA.TELE2 AGAIN. ***
377 // ********************************************************
378 /
379 <SETCFOPT:OFF=1&2&4&&11,ON=3,SCOPE=GLOBAL;
380 <SKIPCMD:LABEL=END;
381 /
382 .AB32 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
383 /
384 // *****************
385 // *** FAULT 3.2 ***
386 // *****************
387 //
388 // ********************************************************
389 // *** REMOTE OSI ADDRESS FOR NEABD NOT CREATED. ***
390 // *** ***
391 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
392 // *** ***
393 // *** START COMMAND FILE CG.SA.TELE2 AGAIN. ***
394 // ********************************************************
395 /
396 <SETCFOPT:OFF=1&2&4&&10,ON=3&11,SCOPE=GLOBAL;
397 <SKIPCMD:LABEL=END;
398 /
399 .AB41 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
400 /

MMN:SW-COFIP-452 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

TELE2

401 // *****************
402 // *** FAULT 4.1 ***
403 // *****************
404 //
405 // ********************************************************
406 // *** LOCAL APPLICATION DIALG NOT CREATED. ***
407 // *** ***
408 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
409 // *** ***
410 // *** START COMMAND FILE CG.SA.TELE2 AGAIN. ***
411 // ********************************************************
412 /
413 <SETCFOPT:OFF=1&&3&5&&11,ON=4,SCOPE=GLOBAL;
414 <SKIPCMD:LABEL=END;
415 /
416 .AB42 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
417 /
418 // *****************
419 // *** FAULT 4.2 ***
420 // *****************
421 //
422 // ********************************************************
423 // *** LOCAL APPLICATION NEABD NOT CREATED. ***
424 // *** ***
425 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
426 // *** ***
427 // *** START COMMAND FILE CG.SA.TELE2 AGAIN. ***
428 // ********************************************************
429 /
430 <SETCFOPT:OFF=1&&3&5&&10,ON=4&11,SCOPE=GLOBAL;
431 <SKIPCMD:LABEL=END;
432 /
433 .AB51 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
434 /
435 // *****************
436 // *** FAULT 5.1 ***
437 // *****************
438 //
439 // ********************************************************
440 // *** REMOTE APPLICATION DIALG NOT CREATED. ***
441 // *** ***
442 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
443 // *** ***
444 // *** START COMMAND FILE CG.SA.TELE2 AGAIN. ***
445 // ********************************************************
446 /
447 <SETCFOPT:OFF=1&&4&6&&11,ON=5,SCOPE=GLOBAL;
448 <SKIPCMD:LABEL=END;
449 /
450 .AB52 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-453
MMN:SW Maintenance
Software

TELE2

451 /
452 // *****************
453 // *** FAULT 5.2 ***
454 // *****************
455 //
456 // ********************************************************
457 // *** REMOTE APPLICATION NEABD NOT CREATED. ***
458 // *** ***
459 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
460 // *** ***
461 // *** START COMMAND FILE CG.SA.TELE2 AGAIN. ***
462 // ********************************************************
463 /
464 <SETCFOPT:OFF=1&&4&6&&10,ON=5&11,SCOPE=GLOBAL;
465 <SKIPCMD:LABEL=END;
466 /
467 .AB6 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
468 /
469 // ***************
470 // *** FAULT 6 ***
471 // ***************
472 //
473 // ********************************************************
474 // *** LOCAL X25 DTE NOT CREATED. ***
475 // *** ***
476 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
477 // *** ***
478 // *** START COMMAND FILE CG.SA.TELE2 AGAIN. ***
479 // ********************************************************
480 /
481 <SETCFOPT:OFF=1&&5&7&&11,ON=6,SCOPE=GLOBAL;
482 <SKIPCMD:LABEL=END;
483 /
484 .AB7 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
485 /
486 // ***************
487 // *** FAULT 7 ***
488 // ***************
489 //
490 // ********************************************************
491 // *** REMOTE X25 DTE NOT CREATED. ***
492 // *** ***
493 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
494 // *** ***
495 // *** START COMMAND FILE CG.SA.TELE2 AGAIN. ***
496 // ********************************************************
497 /
498 <SETCFOPT:OFF=1&&6&8&&11,ON=7,SCOPE=GLOBAL;
499 <SKIPCMD:LABEL=END;
500 /

MMN:SW-COFIP-454 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

TELE2

501 .AB8 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;

502 /
503 // ***************
504 // *** FAULT 8 ***
505 // ***************
506 //
507 // ********************************************************
508 // *** LOCAL X25 ROUTE NOT CREATED. ***
509 // *** ***
510 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
511 // *** ***
512 // *** START COMMAND FILE CG.SA.TELE2 AGAIN. ***
513 // ********************************************************
514 /
515 <SETCFOPT:OFF=1&&7&9&&11,ON=8,SCOPE=GLOBAL;
516 <SKIPCMD:LABEL=END;
517 /
518 .AB9 <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
519 /
520 // ***************
521 // *** FAULT 9 ***
522 // ***************
523 //
524 // ********************************************************
525 // *** REMOTE X25ROUTE NOT CREATED. ***
526 // *** ***
527 // *** CHECK PREREQUISITES, ELIMINATE FAULTS. ***
528 // *** ***
529 // *** START COMMAND FILE CG.SA.TELE2 AGAIN. ***
530 // ********************************************************
531 /
532 <SETCFOPT:OFF=1&&8&10&11,ON=9,SCOPE=GLOBAL;
533 <SKIPCMD:LABEL=END;
534 /
535 /
536 /
537 .OUT <SETCFOPT:ACKCFS=ERROR,SCOPE=GLOBAL;
538 /
539 // *******************************
540 // *** FINISHED WITHOUT FAULTS ***
541 // *******************************
542 //
543 // ********************************************************
544 // *** ***
545 // *** THE CONFIGURATION OF THE LINK AND PROCESSOR ***
546 // *** DATABASE WAS SUCCESSFULLY EXECUTED. ***
547 // *** ***
548 // ********************************************************
549 /
550 <SETCFOPT:OFF=1&&16,SCOPE=GLOBAL;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-455
MMN:SW Maintenance
Software

TELE2

551 <SKIPCMD:LABEL=END;
552 /
553 /
554 /
555 .END <SETCFOPT:ACKCFS=ERROR,DANCMD=NOEXEC,ACKREQ=NEG,SCOPE=GLOBAL;
556 <ENDFILE;

MMN:SW-COFIP-456 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

ZORD1

1 <CMDFILE;
2 /
3 // 80-ZORD1-05
4 /
5 /****V05***************************************************************
6 /* *
7 /* COMMAND FILE CG.SA.ZORD1 ORDER NUMBER ASSIGNMENT TO PROCEDURES *
8 /* ============================================================== *
9 /* *
10 /* TASK DESCRIPTION: *
11 /* ----------------- *
12 /* - DISPLAYING DESIRED STATE *
13 /* *
14 /**********************************************************************
15 /
16 <SETCFOPT:ACKCFS=ERROR,DANCMD=EXEC,ACKREQ=POS,SCOPE=GLOBAL;
17 /
18 <STEP;
19 /
20 //
21 //
22 // ORDER NUMBER ASSIGNMENT TO PROCEDURES
23 // =====================================
24 //
25 // THE COMMAND FILES ARE DELIVERED ON FLOPPY DISK WITH
26 // INDEX NUMBER: A30808-X3080-C485-5-7620
27 //
28 //
29 // *******************************************************************
30 // * EMCYMN/MMN/NM:SW PROCEDURES ASSIGNED COMMANDFILES *
31 // *******************************************************************
32 // * NAME ORDER NO. NAME IDENTIFIER *
33 // *******************************************************************
34 // * SW140 A30808-X3081-A485- *-7620 CG.SA.REC53 80-REC53-01 *
35 // *******************************************************************
36 //
37 /
38 <STEP;
39 /
40 //
41 //
42 // *******************************************************************
43 // * SW141 A30808-X3081-A485- *-7620 CG.SA.REC53 80-REC53-01 *
44 // *******************************************************************
45 //
46 /
47 <STEP;
48 /
49 //
50 //

A30808-X3080-C485-5-7620 MMN:SW-COFIP-457
MMN:SW Maintenance
Software

ZORD1

51 // *******************************************************************
52 // * EY150 A30808-X3080-A493- *-7620 CG.SA.REC51 80-REC51-01 *
53 // * CG.SA.REC52 80-REC52-01 *
54 // * CG.SA.REC53 80-REC53-01 *
55 // *******************************************************************
56 //
57 /
58 <STEP;
59 /
60 //
61 //
62 // *******************************************************************
63 // * EY151 A30808-X3080-A493- *-7620 CG.SA.REC54 80-REC54-05 *
64 // * CG.SA.REC55 80-REC55-01 *
65 // * CG.SA.REC53 80-REC53-01 *
66 // *******************************************************************
67 //
68 /
69 <STEP;
70 /
71 //
72 //
73 // *******************************************************************
74 // * EY170 A30808-X3080-A493- *-7620 CG.SA.REC71 80-REC71-01 *
75 // * CG.SA.REC72 80-REC72-01 *
76 // * CG.SA.REC73 80-REC73-01 *
77 // * CG.SA.REC74 80-REC74-01 *
78 // * CG.SA.REC75 80-REC75-01 *
79 // * CG.SA.REC78 80-REC80-01 *
80 // * CG.SA.REC79 80-REC79-01 *
81 // *******************************************************************
82 //
83 /
84 <STEP;
85 /
86 //
87 //
88 // *******************************************************************
89 // * EY171 A30808-X3080-A493- *-7620 CG.SA.REC76 80-REC76-01 *
90 // * CG.SA.REC77 80-REC77-05 *
91 // *******************************************************************
92 //
93 /
94 <STEP;
95 /
96 //
97 //
98 // *******************************************************************
99 // * EY190 A30808-X3080-A493- *-7620 CG.SA.REC91 80-REC91-01 *
100 // * EY192 A30808-X3080-A493- *-7620 CG.SA.REC92 80-REC92-01 *

MMN:SW-COFIP-458 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

ZORD1

101 // * EY193 A30808-X3080-A493- *-7620 *

102 // * EY194 A30808-X3080-A493- *-7620 *
103 // * EY195 A30808-X3080-A493- *-7620 *
104 // *******************************************************************
105 //
106 /
107 <STEP;
108 /
109 //
110 //
111 // *******************************************************************
112 // * SW212 A30808-X3080-A485- *-7620 CG.SA.Q11AP 80-Q11AP-05 *
113 // * SW213 A30808-X3080-A485- *-7620 CG.SA.Q12AP 80-Q12AP-05 *
114 // * CG.SA.R11AP 80-R11AP-05 *
115 // * CG.SA.M11AP 80-M11AP-05 *
116 // *******************************************************************
117 //
118 /
119 <STEP;
120 /
121 //
122 //
123 // *******************************************************************
124 // * SW216 A30808-X3080-A485- *-7620 CG.SA.Q21AP 80-Q21AP-05 *
125 // * SW217 A30808-X3080-A485- *-7620 CG.SA.Q22AP 80-Q22AP-05 *
126 // * CG.SA.R21AP 80-R21AP-05 *
127 // * CG.SA.M21AP 80-M21AP-05 *
128 // *******************************************************************
129 //
130 /
131 <STEP;
132 /
133 //
134 //
135 // *******************************************************************
136 // * SW224 A30808-X3080-A485- *-7620 CG.SA.RCAMA 80-RCAMA-01 *
137 // * CG.SA.RCERS 80-RCERS-01 *
138 // * CG.SA.RCDNB 80-RCDNB-01 *
139 // * CG.SA.RCFIR 80-RCFIR-01 *
140 // * CG.SA.RCIAR 80-RCIAR-01 *
141 // * CG.SA.RCINA 80-RCINA-01 *
142 // * CG.SA.RCMAL 80-RCMAL-01 *
143 // * CG.SA.RCMOB 80-RCMOB-01 *
144 // * CG.SA.RCPMB 80-RCPMB-01 *
145 // * CG.SA.RCTOB 80-RCTOB-01 *
146 // * CG.SA.RCTST 80-RCTST-01 *
147 // *******************************************************************
148 //
149 /
150 <STEP;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-459
MMN:SW Maintenance
Software

ZORD1

151 /
152 //
153 //
154 // *******************************************************************
155 // * SW226 A30808-X3080-A485- *-7620 CG.SA.RDAMA 80-RDAMA-01 *
156 // * CG.SA.RDERS 80-RDERS-01 *
157 // * CG.SA.RDDNB 80-RDDNB-01 *
158 // * CG.SA.RDFIR 80-RDFIR-01 *
159 // * CG.SA.RDIAR 80-RDIAR-01 *
160 // * CG.SA.RDINA 80-RDINA-01 *
161 // * CG.SA.RDMAL 80-RDMAL-01 *
162 // * CG.SA.RDMOB 80-RDMOB-01 *
163 // * CG.SA.RDPMB 80-RDPMB-01 *
164 // * CG.SA.RDTOB 80-RDTOB-01 *
165 // * CG.SA.RDTST 80-RDTST-01 *
166 // *******************************************************************
167 //
168 //
169 /
170 <STEP;
171 /
172 //
173 //
174 // *******************************************************************
175 // * SW231 A30808-X3080-A485- *-7620 CG.SA.HADMI 80-HADMI-01 *
176 // * CG.SA.HCCNC 80-HCCNC-01 *
177 // * CG.SA.HCPPR 80-HCPPR-01 *
178 // * CG.SA.HHISD 80-HHISD-04 *
179 // * CG.SA.HHIST 80-HHIST-04 *
180 // * CG.SA.HLTDL 80-HLTDL-01 *
181 // * CG.SA.HMAST 80-HMAST-01 *
182 // * CG.SA.HOSIA 80-HOSIA-01 *
183 // * CG.SA.HPERI 80-HPERI-01 *
184 // * CG.SA.HRECO 80-HRECO-01 *
185 // * CG.SA.HSONS 80-HSONS-01 *
186 // * CG.SA.HVTAD 80-HVTAD-01 *
187 // * CG.SA.HVTAL 80-HVTAL-01 *
188 // *******************************************************************
189 //
190 //
191 <STEP;
192 /
193 //
194 //
195 // *******************************************************************
196 // * SW422 A30808-X3081-A485- *-7620 CG.LT.LOT01 80-LOT01-01 *
197 // * CG.LT.LOT02 80-LOT02-01 *
198 // * CG.LT.LOT03 80-LOT03-01 *
199 // *******************************************************************
200 //

MMN:SW-COFIP-460 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

ZORD1

201 //
202 <STEP;
203 /
204 //
205 //
206 // *******************************************************************
207 // * SW441 A30808-X3081-A485- *-7620 CG.PS.PSW01 80-PSW01-01 *
208 // * CG.PS.PSW02 80-PSW02-01 *
209 // * CG.PS.PSW03 80-PSW03-01 *
210 // * CG.PS.PSW04 80-PSW04-01 *
211 // *******************************************************************
212 //
213 //
214 <STEP;
215 /
216 //
217 //
218 // *******************************************************************
219 // * SW451 A30808-X3081-A485- *-7620 CG.EP.EXP01 80-EXP01-01 *
220 // * CG.EP.EXP02 80-EXP02-01 *
221 // * CG.EP.EXP04 80-EXP04-01 *
222 // *******************************************************************
223 //
224 //
225 <STEP;
226 /
227 //
228 //
229 // *******************************************************************
230 // * SW471 A30808-X3081-A485- *-7620 CG.SA.TELE1 80-TELE1-01 *
231 // * CG.SA.TELE2 80-TELE2-01 *
232 // *******************************************************************
233 //
234 /
235 <ENDFILE;

A30808-X3080-C485-5-7620 MMN:SW-COFIP-461
MMN:SW Maintenance
Software

ZORD2

1 <CMDFILE;
2 /
3 // 80-ZORD2-05
4 /
5 /****V05***************************************************************
6 /* *
7 /* COMMAND FILE CG.SA.ZORD2 ORDER NUMBER ASSIGNMENT TO PROCEDURES *
8 /* ============================================================== *
9 /* *
10 /* TASK DESCRIPTION: *
11 /* ----------------- *
12 /* - DISPLAYING ACTUAL STATE *
13 /* *
14 /**********************************************************************
15 /
16 <SETCFOPT:ACKCFS=ERROR,DANCMD=EXEC,ACKREQ=POS,SCOPE=GLOBAL;
17 /
18 <EXEC EDTS8;
19 /
20 *R CG.SA.REC51
21 *D2
22 *D4:$-1
23 *N
24 /
25 *R CG.SA.REC52
26 *N
27 *D3:4
28 *D6:$-1
29 *N
30 /
31 *R CG.SA.REC53
32 *N
33 *D4:5
34 *D7:$-1
35 *N
36 /
37 *R CG.SA.REC54
38 *N
39 *D5:6
40 *D8:$-1
41 *N
42 /
43 *R CG.SA.REC55
44 *N
45 *D6:7
46 *D9:$-1
47 *N
48 /
49 *R CG.SA.REC71
50 *N

MMN:SW-COFIP-462 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

ZORD2

51 *D7:8
52 *D10:$-1
53 *N
54 /
55 *R CG.SA.REC72
56 *N
57 *D8:9
58 *D11:$-1
59 *N
60 /
61 *R CG.SA.REC73
62 *N
63 *D9:10
64 *D12:$-1
65 *N
66 /
67 *R CG.SA.REC74
68 *N
69 *D10:11
70 *D13:$-1
71 *N
72 /
73 *R CG.SA.REC75
74 *N
75 *D11:12
76 *D14:$-1
77 *N
78 /
79 *R CG.SA.REC76
80 *N
81 *D12:13
82 *D15:$-1
83 *N
84 /
85 *R CG.SA.REC77
86 *N
87 *D13:14
88 *D16:$-1
89 *N
90 /
91 *R CG.SA.REC78
92 *N
93 *D14:15
94 *D17:$-1
95 *N
96 /
97 *R CG.SA.REC79
98 *N
99 *D15:16
100 *D18:$-1

A30808-X3080-C485-5-7620 MMN:SW-COFIP-463
MMN:SW Maintenance
Software

ZORD2

101 *N
102 /
103 *R CG.SA.REC91
104 *N
105 *D16:17
106 *D19:$-1
107 *N
108 /
109 *R CG.SA.REC92
110 *N
111 *D17:18
112 *D20:$-1
113 *N
114 /
115 *R CG.SA.Q11AP
116 *N
117 *D18:19
118 *D21:$-1
119 *N
120 /
121 *R CG.SA.Q12AP
122 *N
123 *D19:20
124 *D22:$-1
125 *N
126 /
127 *R CG.SA.R11AP
128 *N
129 *D20:21
130 *D23:$-1
131 *N
132 /
133 *R CG.SA.M11AP
134 *N
135 *D21:22
136 *D24:$-1
137 *N
138 /
139 *R CG.SA.Q21AP
140 *N
141 *D22:23
142 *D25:$-1
143 *N
144 /
145 *R CG.SA.Q22AP
146 *N
147 *D23:24
148 *D26:$-1
149 *N
150 /

MMN:SW-COFIP-464 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

ZORD2

151 *R CG.SA.R21AP
152 *N
153 *D24:25
154 *D27:$-1
155 *N
156 /
157 *R CG.SA.M21AP
158 *N
159 *D25:26
160 *D28:$-1
161 *N
162 /
163 *R CG.SA.RCAMA
164 *N
165 *D26:27
166 *D29:$-1
167 *N
168 /
169 *R CG.SA.RCERS
170 *N
171 *D27:28
172 *D30:$-1
173 *N
174 /
175 *R CG.SA.RCIAR
176 *N
177 *D28:29
178 *D31:$-1
179 *N
180 /
181 *R CG.SA.RCINA
182 *N
183 *D29:30
184 *D32:$-1
185 *N
186 /
187 *R CG.SA.RCFIR
188 *N
189 *D30:31
190 *D33:$-1
191 *N
192 /
193 *R CG.SA.RCMAL
194 *N
195 *D31:32
196 *D34:$-1
197 *N
198 /
199 *R CG.SA.RCMOB
200 *N

A30808-X3080-C485-5-7620 MMN:SW-COFIP-465
MMN:SW Maintenance
Software

ZORD2

201 *D32:33
202 *D35:$-1
203 *N
204 /
205 *R CG.SA.RCDNB
206 *N
207 *D33:34
208 *D36:$-1
209 *N
210 /
211 *R CG.SA.RCTST
212 *N
213 *D34:35
214 *D37:$-1
215 *N
216 /
217 *R CG.SA.RCPMB
218 *N
219 *D35:36
220 *D38:$-1
221 *N
222 /
223 *R CG.SA.RCTOB
224 *N
225 *D36:37
226 *D39:$-1
227 *N
228 /
229 *R CG.SA.RDAMA
230 *N
231 *D37:38
232 *D40:$-1
233 *N
234 /
235 *R CG.SA.RDERS
236 *N
237 *D38:39
238 *D41:$-1
239 *N
240 /
241 *R CG.SA.RDIAR
242 *N
243 *D39:40
244 *D42:$-1
245 *N
246 /
247 *R CG.SA.RDINA
248 *N
249 *D40:41
250 *D43:$-1

MMN:SW-COFIP-466 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

ZORD2

251 *N
252 /
253 *R CG.SA.RDFIR
254 *N
255 *D41:42
256 *D44:$-1
257 *N
258 /
259 *R CG.SA.RDMAL
260 *N
261 *D42:43
262 *D45:$-1
263 *N
264 /
265 *R CG.SA.RDMOB
266 *N
267 *D43:44
268 *D46:$-1
269 *N
270 /
271 *R CG.SA.RDDNB
272 *N
273 *D44:45
274 *D47:$-1
275 *N
276 /
277 *R CG.SA.RDTST
278 *N
279 *D45:46
280 *D48:$-1
281 *N
282 /
283 *R CG.SA.HADMI
284 *N
285 *D46:47
286 *D49:$-1
287 *N
288 /
289 *R CG.SA.HCCNC
290 *N
291 *D47:48
292 *D50:$-1
293 *N
294 /
295 *R CG.SA.HHISD
296 *N
297 *D48:49
298 *D51:$-1
299 *N
300 /

A30808-X3080-C485-5-7620 MMN:SW-COFIP-467
MMN:SW Maintenance
Software

ZORD2

301 *R CG.SA.HHIST
302 *N
303 *D49:50
304 *D52:$-1
305 *N
306 /
307 *R CG.SA.HLTDL
308 *N
309 *D50:51
310 *D53:$-1
311 *N
312 /
313 *R CG.SA.HMAST
314 *N
315 *D51:52
316 *D54:$-1
317 *N
318 /
319 *R CG.SA.HOSIA
320 *N
321 *D52:53
322 *D55:$-1
323 *N
324 /
325 *R CG.SA.HPERI
326 *N
327 *D53:54
328 *D56:$-1
329 *N
330 /
331 *R CG.SA.HRECO
332 *N
333 *D54:55
334 *D57:$-1
335 *N
336 /
337 *R CG.SA.HSONS
338 *N
339 *D55:56
340 *D58:$-1
341 *N
342 /
343 *R CG.SA.HVTAD
344 *N
345 *D56:57
346 *D59:$-1
347 *N
348 /
349 *R CG.SA.HVTAL
350 *N

MMN:SW-COFIP-468 A30808-X3080-C485-5-7620
Maintenance MMN:SW
Software

ZORD2

351 *D57:58
352 *D60:$-1
353 *N
354 /
355 *R CG.SA.TELE1
356 *N
357 *D58:59
358 *D61:$-1
359 *N
360 /
361 *R CG.SA.TELE2
362 *N
363 *D59:60
364 *D62:$-1
365 *N
366 /
367 *R CG.LT.LOT01
368 *N
369 *D60:61
370 *D63:$-1
371 *N
372 /
373 *R CG.LT.LOT02
374 *N
375 *D61:62
376 *D64:$-1
377 *N
378 /
379 *R CG.LT.LOT03
380 *N
381 *D62:63
382 *D65:$-1
383 *N
384 /
385 *R CG.PS.PSW01
386 *N
387 *D63:64
388 *D66:$-1
389 *N
390 /
391 *R CG.PS.PSW02
392 *N
393 *D64:65
394 *D67:$-1
395 *N
396 /
397 *R CG.PS.PSW03
398 *N
399 *D65:66
400 *D68:$-1

A30808-X3080-C485-5-7620 MMN:SW-COFIP-469
MMN:SW Maintenance
Software

ZORD2

401 *N
402 /
403 *R CG.PS.PSW04
404 *N
405 *D66:67
406 *D69:$-1
407 *N
408 /
409 *R CG.EP.EXP01
410 *N
411 *D67:68
412 *D70:$-1
413 *N
414 /
415 *R CG.EP.EXP02
416 *N
417 *D68:69
418 *D71:$-1
419 *N
420 /
421 *R CG.EP.EXP04
422 *N
423 *D69:70
424 *D72:$-1
425 *N
426 /
427 *W CG.ZORDER
428 *END
429 /
430 // *******************************************************
431 // * *
432 // * DISPLAYING ACTUAL STATUS OF PROCEDURE COMMAND FILES *
433 // * =================================================== *
434 // * *
435 // *******************************************************
436 /
437 <EXEC CMDFILE:FILE=CG.ZORDER;
438 /
439 <DEL FILE:FILE=CG.ZORDER;
440 /
441 <ENDFILE;

MMN:SW-COFIP-470 A30808-X3080-C485-5-7620