LED DIGITAL CLOCKS SERIES DC

LED Digital Clocks Series DC

The DC series covers elegant and very slim Numerous executions and options make it
digital clocks in 7 segment LED technique for possible to fulfill individual requests:
displaying time and date. They differ by
character height of 57, 100 or 180 mm and by • LED display in red, green, blue or yellow
four or six-digit time and date display. As a
standard function, the stopwatch is included in • Single- or double-sided clocks
all models. A lot of various synchronization
modes are available: • Aluminum housings, black- or silver-
anodized or in any RAL color

• “Stand-alone” operation with internal quartz • Wall mounting, ceiling suspension or wall
or with external DCF time code receiver, bracket mounting
mains powered
Options:
• NTP multicast or unicast (IP based) in
Ethernet network, PoE or mains powered
• Outdoor sensor for temperature display
• Slave clock operation in a wireless WTD
• Interface for RS 232, RS 485, IRIG-B
system with a transmitter, which sends the
time signal, mains powered
• External buttons for stopwatch

 Slave clock operation, controlled by self-

• Infrared remote control for easy access
setting MOBALine code, mains powered
to all functions, for the configuration as
well as for the stopwatch function

V0513
Gerhard D. WEMPE KG
Division Chronometerwerke
Steinstr. 23 20095 Hamburg Germany
P: +49-40-33448-899 F: +49-40-33448-676
E: [email protected] www.wempe-maritime.de
 LED DIGITAL CLOCKS SERIES DC

DC Series – individual variants

Display Features Mechanics Synchronization

• Time display in four (HH:MM) or six • Anti-reflection front cover made of • Autonomous operation with internal
digits (HH:MMSS) or (HH:MM:SS), plexiglass including a filter layer for quartz time base with programmable,
either 12 or 24 hours format best readability over a wide viewing automatic seasonal time change or
• Date display in four (DD.MM) or six angle with external DCF or GPS time signal
digits (MM.DDYY) or (DD.MM.YY) • Elegant and very slim clock frame, receiver
• Alternating display of time, date and made of black or silver anodized • Slave clock operation: MOBALine (self-
temperature, with adjustable time aluminum profiles. Any RAL color setting), NTP over Ethernet, WTD
period for the different figures in the available on request (Wireless Time Distribution, 868
range of 0 – 60 sec • Single- or double-sided execution for MHz, NFS87-500)
• Temperature display in °C or °F in wall mounting, ceiling suspension or • Option: IRIG-B, RS 232 / RS 485
combination with an external tempe- wall bracket mounting
rature sensor Stopwatch
• Digits of 57, 100 or 180 mm height,
which corresponds to readability • Counting upwards from zero up to
distance of up to 25, 40 or 70 m 24 hours
respectively • Counting downwards from a specific
• Display available in red, green, pure value either with stop or with auto-
green, blue or yellow matic restart at zero or counting into
• Sensor controlled automatic or negative values
manual adjustment of the display • Display of time intervals, freezing of
brightness display, cumulating of time intervals.
• Possibility to set up MOBALine world • Counting steps of 1 minute, 1 second
time zones or 1/100 seconds
• Operation via external buttons or
• Easy installation and time-saving • IR remote control unit
maintenance due to the back panel
which is designed as a mounting Configuration
plate, on which the clock can be
snapped-on and secured with a Setting of the clock parameters by means
screw of two push buttons on top of the clock
frame or via IR remote control unit. For
NTP version Telnet (DHCP/manual) or
configuration via MOBA-NMS is possible.
Remote firmware update through the LAN
via TFTP.

DC.57.4 Wall bracket:

DC.57.6

DC.180.6
DC.100.4

DC.100.6
All dimensions are in millimeters.
Additional 6 mm distance elements shipped with DC.

V0513
Gerhard D. WEMPE KG
Division Chronometerwerke
Steinstr. 23 20095 Hamburg Germany
P: +49-40-33448-899 F: +49-40-33448-676
E: [email protected] www.wempe-maritime.de
LED DIGITAL CLOCKS SERIES DC

Order reference: 1-2-3-4-5-6-7-8

Rear cover with terminal board

Digit height 1
57 mm (height of first 4 digits) 57
100 mm (height of first 4 digits) 100
100 mm (height of all 6 digits) 100x
180 mm (height of first 4 digits) 180
180 mm (height of all 6 digits) 180x
Number of digits 2
four digits (HH:MM) 4
six digits (HH:MM:SS) 6
Display color 3
red R
pure green PG
blue B
yellow (amber) A
green G
Clock design 4 Frame detail
single-sided N
double-sided D
Mode of assembly 5
wall mounting (for single clock only) N
ceiling suspension (conventionally 5, 10, 30, 50 cm) S
wall bracket B
Version 6
standard version - autonomous /MOBALine / STD
(un)polarized pulses 24 VDC
STD with built-in RS 232, RS 485 and IRIG-B interface, SI
mains powered
Ethernet version synchronized by NTP, mains powered NTP
Ethernet version synchronized by NTP and PoE powered PoE
WTD wireless synchronization, mains powered WTD
Frame color 7
black black
silver silver
frame color, on request RALxxxx
Options 8
powered by 24 VDC VDC
internal relay REL
Accessories
GPS receiver GPS 4500
DCF 77 radio signal receiver DCF 4500
remote IR controller IR
keyboard for stopwatch control, cable 5 m SK
temperature sensor TP
two temperature sensors TP 2

V0513
Gerhard D. WEMPE KG
Division Chronometerwerke
Steinstr. 23 20095 Hamburg Germany
P: +49-40-33448-899 F: +49-40-33448-676
E: [email protected] www.wempe-maritime.de
LED DIGITAL CLOCKS SERIES DC

V0513
Gerhard D. WEMPE KG
Division Chronometerwerke
Steinstr. 23 20095 Hamburg Germany
P: +49-40-33448-899 F: +49-40-33448-676
E: [email protected] www.wempe-maritime.de