Scribd Logo
Upload

Welcome to Scribd!

  • 165 views

    Huawei AQU4518R21

    Uploaded by

    RNNicoll
    This document provides specifications for the AQU4518R21 quad-band antenna, including: - Electrical specifications covering frequency range, polarization, gain, beamwidth, isolation, and power handling. - Mechanical specifications covering antenna dimensions, weight, wind loading, and connector information. - Integrated remote electrical tilt (RET) specifications covering RET type, protocols, power consumption, adjustment time, and lightning protection. - Pattern samples and notes on proper installation and use of the antenna.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Huawei AQU4518R21

    Uploaded by

    RNNicoll
    165 views2 pages
    This document provides specifications for the AQU4518R21 quad-band antenna, including: - Electrical specifications covering frequency range, polarization, gain, beamwidth, isolation, and power handling. - Mechanical specifications covering antenna dimensions, weight, wind loading, and connector information. - Integrated remote electrical tilt (RET) specifications covering RET type, protocols, power consumption, adjustment time, and lightning protection. - Pattern samples and notes on proper installation and use of the antenna.

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides specifications for the AQU4518R21 quad-band antenna, including: - Electrical specifications covering frequency range, polarization, gain, beamwidth, isolation, and power handling. - Mechanical specifications covering antenna dimensions, weight, wind loading, and connector information. - Integrated remote electrical tilt (RET) specifications covering RET type, protocols, power consumption, adjustment time, and lightning protection. - Pattern samples and notes on proper installation and use of the antenna.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    165 views2 pages

    Huawei AQU4518R21

    Uploaded by

    RNNicoll
    This document provides specifications for the AQU4518R21 quad-band antenna, including: - Electrical specifications covering frequency range, polarization, gain, beamwidth, isolation, and power handling. - Mechanical specifications covering antenna dimensions, weight, wind loading, and connector information. - Integrated remote electrical tilt (RET) specifications covering RET type, protocols, power consumption, adjustment time, and lightning protection. - Pattern samples and notes on proper installation and use of the antenna.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    AQU4518R21

    DXXXX-1710-2690/1710-2690/1710-2690/1710-2690-65/65/65/65-
    18i/18i/18i/18i-M/M/M/M-R
    EasyRET Quad-Band Antenna with 4 Integrated RCUs - 1.4m

    Antenna Specifications
    Electrical Properties
    4 x (1710 - 2690)
    Frequency range (MHz)
    1710 - 1990 1920 - 2200 2200 - 2490 2490 - 2690
    Polarization +45° , -45°
    Electrical downtilt (°) 0 - 12 , continuously adjustable, each band separately
    at mid Tilt 17.4 17.7 17.9 18.3
    Gain (dBi)
    over all Tilts 17.2 ±0.5 17.5 ±0.5 17.7 ±0.5 18.0 ±0.5
    Side lobe suppression for first side
    > 18 > 18 > 19 > 20
    lobe above main beam (dB)
    Horizontal 3dB beam width (°) 68 ±5 64 ±5 61 ±5 60 ±5
    Vertical 3dB beam width (°) 6.8 ±0.5 6.1 ±0.4 5.4 ±0.4 5.0 ±0.3
    VSWR < 1.5
    Cross polar isolation (dB) ≥ 28
    Interband isolation (dB) ≥ 28 (1710 - 2690 // 1710 - 2690 MHz)
    Front to back ratio, ±30° (dB) > 27 > 28 > 28 > 28
    Cross polar ratio (dB) 0° > 22 > 22 > 22 > 23
    Max. power per input (W) 250 (at 50℃ ambient temperature)
    Total power (W) 800 (at 50℃ ambient temperature)
    Intermodulation IM3 (dBc) ≤ -153 (2 x 43 dBm carrier)
    Impedance (Ω) 50
    Grounding DC Ground

    1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).


    2. Electrical datasheet in XML format is available.

    Mechanical Properties 106


    Antenna dimensions (H x W x D) (mm) 1499 x 449 x 115
    Packing dimensions (H x W x D) (mm) 1835 x 510 x 185
    Antenna weight (kg) 24.5
    Clamps weight (kg) 3.6 (2 units)
    Antenna packing weight (kg) 36.4 (included clamps)
    Mast diameter supported (mm) 50 - 115
    Radome material Fiberglass
    Radome colour Light grey
    Operational temperature (℃) -40 .. +65
    1499
    1385

    Frontal: 775 (at 150 km/h)


    Wind load (N) Lateral: 90 (at 150 km/h)
    Rear side: 870 (at 150 km/h)
    Max. operational wind speed (km/h) 200
    Survival wind speed (km/h) 250
    Connector 8 x 7/16 DIN Female
    Connector position Bottom

    Accessories
    Item Model Description Weight Units per antenna

    Downtilt kit ASMDT0D01 Mechanical downtilt: 0 - 16 ° 2.1 kg 1 (Separate packing)

    1
    AQU4518R21
    DXXXX-1710-2690/1710-2690/1710-2690/1710-2690-65/65/65/65-
    18i/18i/18i/18i-M/M/M/M-R
    EasyRET Quad-Band Antenna with 4 Integrated RCUs - 1.4m

    Integrated RET Specifications


    Properties
    RET type Integrated RET
    RET protocols* AISG 2.0 / 3GPP
    Input voltage range (V) 10 - 30 DC
    < 6 (motor activated, 12V)
    Power consumption (W)
    < 1.5 (stand by, 12V)
    Adjustment time (full range) (s) < 65 (typically, depending on antenna type)
    4 x 8 pin connector according to IEC 60130-9
    RET connector
    Daisy chain in: Male / Daisy chain out: Female
    1 2 3 4 5 6 7 8
    Pin assignment according AISG
    DC n/c RS-485B n/c RS-485A DC DC return n/c
    3 (10/350 μs)
    Lightning protection (kA)
    10 (8/20 μs)

    * Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software
    interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function,
    contact Huawei before system installation.
    Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55022 (Emission),
    EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003
    Certification: CE, FCC, IC, RCM

    Integrated RET S/N:

    HWMxxx……….yL
    HWMxxx…....yyCL yL yyCL yyyCR yyyyR

    HWMxxx…..yyyCR
    HWMxxx…...yyyyR
    y - Yellow
    L - Left array R - Right array C - Center array

    Pattern sample for reference

    1710 - 2690 MHz 1710 - 2690 MHz


    NOTE (Left) (Center Left)

    1. Facilities, such as towers and poles, must bear the weight and wind load of antennas.
    2. HUAWEI ‘s standard brackets and accessories must be used for any installation.
    3. The antenna working environment must meet the requirements specified in the datasheet.
    4. Only qualified personnel are allowed to perform installation. Installation tools and procedures must conform to
    requirements described in the antenna installation guide.

    Huawei Technologies Co., Ltd. Bantian, Longgang District, Shenzhen 518129, P.R.China www.huawei.com/antenna
    Any previous datasheet issues become invalid. 2 Issue: 2015-11-05

    You might also like