VMS 1

JOB SPECIFICATION NO.
VALVE MATERIAL
SPECIFICATION B224-6-44-0006-6002 REV B
Page 1 of 121
VALVE MATERIAL SPECIFICATION

B224-6-44-0006-6002 REV B
Client : HRRL
Project : RAJASTHAN REFINERY
Location : PACHPADRA
Job No. : B224
B 18/10/2019 REVISED AND REISSUED FOR TENDER MKS PPSW MK
A 21/06/2019 ISSUED FOR TENDER MKS PPSW MK
Rev.
Date Purpose Prepared by Checked by Approved by
No
Template No. 5-0000-0001-T1 Rev. 1 Copyright EIL-All rights reserved

Page 2460 of 5886
VALVE MATERIAL
Page 2 of 121
Abbreviations:
API : American Petroleum Institute
AS : Alloy Steel
ASME : American Society of Mechanical Engineers
ASTM : American Society for Testing & Materials
BS : British Standards
BW : Butt Weld
CAF : Compressed Asbestos Fiber
IBR : Indian Boiler Regulations
IS : Indian Standards
OS&Y : Outside Screw & Yoke
PTFE : Poly tetra flouro ethylene
RPTFE : Reinforced Poly tetra flouro ethylene
SCRW : Screwed
SS : Stainless Steel
SW : Socket Weld
VMS : Valve Material Specifications

Page 2461 of 5886
VALVE MATERIAL
Page 3 of 121
CONTENTS
Sl. No. Description Pages
1 Valve Material Specifications (B224-6-44-0006-6002) Rev. B 121

2 Annexure-I: Valve Material Specifications General Notes,(B224-6-44-0006-A1) Rev. A 5

Page 2462 of 5886
VALVE MATERIAL
Page 4 of 121
Client : HRRL Dept./Sect. : 16/43

Location : PACHPADRA
INDEX OF VALVE TAG NOS.

Gate Valve
51001 Rev. 6 51002 Rev. 6 51003 Rev. 8 51013 Rev. 10 51045 Rev. 9 51046 Rev. 7
51413 Rev. 9 51446 Rev. 7 51501 Rev. 6 51503 Rev. 8
Globe Valve
52446 Rev. 7 52501 Rev. 6 52503 Rev. 8
Check Valve
53403 Rev. 8 53413 Rev. 9 53446 Rev. 7 53501 Rev. 6 53503 Rev. 8
Ball Valve
54345 Rev. 4 54346 Rev. 0 543AC Rev. 0 54401 Rev. 7 54413 Rev. 4 54446 Rev. 0
544AC Rev. 0 54501 Rev. 2 54503 Rev. 4
Plug Valve
55301 Rev. 8 55313 Rev. 9 55345 Rev. 5 55401 Rev. 8 55413 Rev. 9
Butterfly Valve
Piston Valve
64402 Rev. 1 64422 Rev. 1
Notes: 1. For VMS General Notes, refer Annexure-I of this document.
2. For VMS Extracts, refer Annexure-II of this document.

Page 2463 of 5886
VALVE MATERIAL
Page 5 of 121

Location : PACHPADRA Tag No: 51001 Sheet No. 1 of 1
GATE VALVE SPECIFICATION MANUF'S OFFER

TAG NO. : 51001 PIPING CLASS : A11A, A13A, A1A, A20A, A32A, A33A, A39A, STANDARD:
A3A, A41A, A69A, A6A, A80A, A91A, A92A,
A93A, A94A, A95A, A99A, A9A, B13A, B1A, MFGRS CAT/FIG:
B32A, B41A, B6A, B96A, B99A, B9A, D1A, RATING: ENDS:
D96A, D9A,
RATING : 800 STANDARD : API 602/ ISO 15761
SIZE RANGE : 0.25" TO 1.5" ENDS : SW 3000 TO B-16.11
DESCRIPTION CONSTRUCTION MATERIAL CONSTRUCTION MATERIAL

BODY FORGED ASTM A 105
BONNET BOLTED ASTM A 105
STEM RISING 13% CR.STEEL (NO CASTING)
WEDGE DISC SOLID STELLITED
BODY SEAT RING RENEWABLE STELLITED
STEM PACKING RENEWABLE WITH CORROSION INHIBITED DIE FORMED FLEXIBLE

VALVE OPEN ON GRAPHITE WITH BRAIDED ANTI EXTRUSION
STREAM RINGS
HAND WHEEL NON RISING MALLEABLE IRON/CAST ST/FAB.ST/DUCT. IRON
BONNET BOLTS ASTM A193 GR B7
BONNET NUTS ASTM A194 GR 2H
BONNET GASKET SP.WND SS316- GRAFOIL FILLER
SPECIAL SERVICE MAX TEMP. 427 DEG. C.

CONDITIONS
BACK SEAT & INTEGRAL
SHOULDER
OTHERS O.S & Y.
HYDROSTATIC TEST BODY : 2975 PSIG. SEAT : 2175 PSIG

PRESSURE
TEST PRESSURE 80 PSIG
WITH AIR
NOTES
1 THIS VALVE SPEC SHEET SHALL BE READ IN CONJUNCTION WITH TECHNICAL NOTES FOR VALVES.
2 ONLY IN THE CASE OF CATEGORY - II MRs,BIDDER SHALL CLEARLY WRITE ALL/ ANY DEVIATION AGAINST
EACH PART/ MATERIAL OF VALVE IN THE SPACE PROVIDED FOR AND WHEREVER BIDDER AGREES WITH
EIL'S SPEC BIDDER SHALL INDICATE "AGREED".
3 NO CUTTING/ OVERWRITING BY BIDDER ON EIL'S SPEC IS ALLOWED.
SIGNATURE
4 VALVES AS PER API-602 AND TESTING AS PER API-598 ARE ALSO ACCEPTABLE. &
SEAL
OF MANUFACTURER
SHEET REV. NO. 2 3 4 5 6
DATE 02/01/1995 14/12/2000 28/05/2001 30/06/2009 26/04/2018 51001

Page 2464 of 5886
VALVE MATERIAL
Page 6 of 121


TAG NO. : 51002 PIPING CLASS : A22A, A2A, B22A, B2A, D2A, STANDARD:
RATING : 800 STANDARD : API 602/ ISO 15761 MFGRS CAT/FIG:
SIZE RANGE : 0.5" TO 1.5" ENDS : SW 3000 TO B-16.11 RATING: ENDS:

STREAM RINGS
BONNET GASKET SP WND SS316 - GRAFOIL F1LLER
SPECIAL SERVICE I.B.R STEAM/CONDENSATE/BOILER FEED WATER;

CONDITIONS MAX TEMP. 427 DEG. C.
SHOULDER
OTHERS O.S & Y.

PRESSURE
WITH AIR
NOTES
SIGNATURE
4 TESTING SHALL BE AS PER IBR ALSO. &
5 ALL VALVES SHALL BE SUPPLIED WITH IBR CERTIFICATE IN FORM-III C. SEAL
6 ALL VALVES SHALL BE PAINTED RED ON BODY-BONNET JOINT. OF MANUFACTURER
7 VALVES TO COMPLY WITH DESIGN REQUIREMENTS OF IBR ALSO.
8 VALVES AS PER API-602 AND TESTING AS PER API-598 & IBR ARE ALSO ACCEPTABLE.
DATE 02/01/1995 14/12/2000 28/05/2001 30/06/2009 26/04/2018 51002

Page 2465 of 5886
VALVE MATERIAL
Page 7 of 121


B34A, B42A, B43A, B4A, B52A, B53A, B54A,
B97A, D42A, D4A, D97A, MFGRS CAT/FIG:
RATING : 800 STANDARD : API 602/ ISO 15761 RATING: ENDS:

BODY FORGED ASTM A 350 GR.LF2 CL.1
BONNET BOLTED ASTM A 350 GR.LF2 CL.1
STEM RISING SS316 (NO CASTING)

STREAM RINGS
BONNET BOLTS ASTM A320 GR L7
BONNET NUTS ASTM A194 GR 4/GR 7
BONNET GASKET SP WND SS316 - GRAFOIL FILLER
SPECIAL SERVICE LT UPTO -45 DEG. C.

CONDITIONS
SHOULDER
OTHERS O.S & Y.

PRESSURE
WITH AIR
NOTES
SIGNATURE
4 TESTING SHALL BE AS PER BS-6364 ALSO. &
5 VALVES SHALL BE PROVIDED WITH EXTENDED BONNET AS PER BS 6364 (NON COLD BOX APPLICATION). SEAL
6 VALVES TO COMPLY WITH DESIGN REQUIREMENTS OF BS-6364 ALSO. OF MANUFACTURER
7 VALVES AS PER API-602 AND TESTING AS PER API-598 & BS-6364 ARE ALSO ACCEPTABLE.
DATE 28/05/2001 30/06/2009 26/04/2018 10/04/2019 28/06/2019 51003

Page 2466 of 5886
VALVE MATERIAL
Page 8 of 121


TAG NO. : 51013 PIPING CLASS : A19A, A29A, B19A, B29A, B79A, D19A, D29A, STANDARD:
D79A,

STEM RISING SS 316; (NO CASTING)

STREAM RINGS
BONNET GASKET SP WND SS316 - GRAFOIL FILLER
SPECIAL SERVICE CAUSTIC(MAX.TEMP.110 DEG.C) AND AMINE

CONDITIONS
SHOULDER
OTHERS O.S & Y.
HYDROSTATIC TEST BODY : 2975 PSIG SEAT : 2175 PSIG

PRESSURE
WITH AIR
NOTES
SIGNATURE
SEAL
OF MANUFACTURER
DATE 23/06/2003 30/06/2009 26/04/2018 26/11/2018 10/04/2019 51013

Page 2467 of 5886
VALVE MATERIAL
Page 9 of 121


TAG NO. : 51045 PIPING CLASS : A1K, A3K, A47K, A48K, B1K, D1K, D82K, STANDARD:
BODY FORGED ASTM A 182 GR.F304
BONNET BOLTED ASTM A 182 GR.F304

STREAM RINGS
BONNET NUTS ASTM A194 GR.2H
BONNET GASKET SP WND SS316-GRAFOIL FILLER
SPECIAL SERVICE MAX TEMP 454 DEG.C.

CONDITIONS
SHOULDER
OTHERS O.S & Y.

PRESSURE
WITH AIR
NOTES
SIGNATURE
SEAL
OF MANUFACTURER
DATE 30/06/2009 26/04/2018 26/11/2018 10/04/2019 15/05/2019 51045

Page 2468 of 5886
VALVE MATERIAL
Page 10 of 121


TAG NO. : 51046 PIPING CLASS : A25K, A2K, B2K, D2K, STANDARD:

STREAM RINGS
BONNET BOLTS ASTM A320 GR B8 CL.2 (IMPACT TESTED)
BONNET NUTS ASTM A194 GR.8 (IMPACT TESTED)
SPECIAL SERVICE CRYO MIN TEMP -196 DEG C.

CONDITIONS
SHOULDER
OTHERS O.S & Y. (NOTE 5)

PRESSURE
WITH AIR
NOTES
SIGNATURE
4 TESTING SHALL BE AS PER BS 6364 ALSO. &
5 VALVE SHALL BE PROVIDED WITH EXTENDED BONNET AS PER BS 6364 (NON COLD BOX APPLICATION). SEAL
6 VENDOR SHALL CERTIFY SUITABILITY OF THE VALVE FOR INTENDED SERVICE CONDITIONS. OF MANUFACTURER
7 VALVES TO COMPLY WITH DESIGN REQUIREMENTS OF BS-6364 ALSO.
DATE 14/12/2000 28/05/2001 30/06/2009 26/04/2018 28/06/2019 51046

Page 2469 of 5886
VALVE MATERIAL
Page 11 of 121


TAG NO. : 51080 PIPING CLASS : A33Y, A5Y, J2A, STANDARD:
RATING : CL.2 STANDARD : IS:778 CL.2 MFGRS CAT/FIG:
SIZE RANGE : 0.5" TO 1.5" ENDS : SCRF 3000 TO B-1.20.1 RATING: ENDS:
BODY CAST IS 318 GR.LTB2 (LEADED TIN BRONZE)
BONNET BOLTED/SCREWED IS 318 GRLTB2
STEM RISING IS 320 ALLOY HT2 HIGH TENSILE BRASS
WEDGE DISC SOLID IS 318 GR LTB2
BODY SEAT RING RENEWABLE IS 318 GR LTB2
STEM PACKING RENEWABLE WITH PTFE

VALVE OPEN ON
STREAM
BONNET BOLTS IS 1367 CLAUSE 4.6 & 4 / ASTM A193 GR B7
BONNET NUTS IS 1367 CLAUSE 4.6 & 4 / ASTM A194 GR 2H
BONNET GASKET RUBBER

CONDITIONS
BACK SEAT & IS 320 ALLOY HT2
SHOULDER
OTHERS

PRESSURE
TEST PRESSURE
WITH AIR
NOTES
SIGNATURE
4 TESTING SHALL BE AS PER IS:778 CL.2 &
SEAL
OF MANUFACTURER
DATE 14/12/2000 28/05/2001 06/08/2002 30/06/2009 26/04/2018 51080

Page 2470 of 5886
VALVE MATERIAL
Page 12 of 121


TAG NO. : 51301 PIPING CLASS : A11A, A13A, A1A,A32A, A41A, A45A, A45K, STANDARD:
A6A, A93A, A9A,
SIZE RANGE : 2.0" TO 42.0" ENDS : FLGD TO B-16.5 RF/125AARH RATING: ENDS:

BODY CAST ASTM A 216 GR.WCB
BONNET BOLTED ASTM A 216 GR.WCB
WEDGE DISC SOLID/FLEXIBLE 13% CR.STEEL FACING/13% CR.STEEL
BODY SEAT RING RENEWABLE/NON STELLITED

RENEWABLE
STREAM RINGS
BONNET GASKET SP WND SS316-GRAFOIL FILLER/CORRUGATED

SS 316
REQUIREMENT OF REFER TECHNICAL NOTES FOR PURCHASE OF
GEAR OPERATOR VALVES.
RADIOGRAPHY VALVES.
CONDITIONS
BACK SEAT & 13% CR STEEL
SHOULDER
OTHERS O.S & Y.

PRESSURE
WITH AIR
NOTES
SIGNATURE
4 GATE VALVES OF SIZE 26" AND ABOVE SHALL BE IN ACCORDANCE WITH ANSI B-16.34 WITH TESTING AS PER &
API 598 AND FLANGE ENDS SHALL BE IN ACCORDANCE WITH ASME B16.47 SERIES B. SEAL
5 5% VALVE CASTINGS UPTO 24" AND 100% VALVE CASTINGS 26" AND ABOVE SHALL UNDERGO OF MANUFACTURER
RADIOGRAPHIC EXAMINATION.
6 FOR VALVE SIZE UPTO 24", VALVES AS PER API-600 AND TESTING AS PER API-598 ARE ALSO ACCEPTABLE.
SHEET REV. NO. 4 5 6 7 8 9
DATE 28/05/2001 30/06/2009 26/04/2018 26/11/2018 10/04/2019 15/05/2019 51301

Page 2471 of 5886
VALVE MATERIAL
Page 13 of 121


TAG NO. : 51302 PIPING CLASS : A22A, A2A, STANDARD:

RENEWABLE
STREAM RINGS

SS 316
RADIOGRAPHY VALVES.
CONDITIONS MAX. TEMP. 371 DEG.C.
SHOULDER
OTHERS O.S & Y.

PRESSURE
WITH AIR
NOTES
SIGNATURE
7 5% VALVE CASTINGS UPTO 24" AND 100% VALVE CASTINGS 26" AND ABOVE SHALL UNDERGO
8 GATE VALVES OF SIZE 26" AND ABOVE SHALL BE IN ACCORDANCE WITH ANSI B-16.34 WITH TESTING AS PER
API-598 RESPECTIVELY & IBR AND FLANGE ENDS SHALL BE IN ACCORDANCE WITH ASME B16.47 SERIES B.
DATE 30/06/2009 26/04/2018 26/11/2018 10/04/2019 15/05/2019 51302

Page 2472 of 5886
VALVE MATERIAL
Page 14 of 121

Location : PACHPADRA Sheet No. 2 of 2
NOTES
10 FOR VALVE SIZE UPTO 24", VALVES AS PER API-600 AND TESTING AS PER API-598 & IBR ARE ALSO
ACCEPTABLE.
DATE 30/06/2009 26/04/2018 26/11/2018 10/04/2019 15/05/2019 51302

Page 2473 of 5886
VALVE MATERIAL
Page 15 of 121


TAG NO. : 51303 PIPING CLASS : A42A, A46A, A4A, A52A, A53A, A54A, STANDARD:
BODY CAST ASTM A 352 GR.LCB
BONNET BOLTED ASTM A 352 GR.LCB
STEM RISING SS316; (NO CASTING)
WEDGE DISC FLEXIBLE STELLITED
BODY SEAT RING NON- STELLITED

RENEWABLE/RENE
WABLE
STREAM RINGS
BONNET NUTS ASTM A194 GR.4/GR 7

SS316
RADIOGRAPHY VALVES.
SPECIAL SERVICE LT MIN. TEMP. -45 DEG.C.
CONDITIONS
BACK SEAT & SS316
SHOULDER
OTHERS O.S & Y.

PRESSURE
WITH AIR
NOTES
SIGNATURE
5 VALVES SHALL BE PROVIDED WITH EXTENDED BONNET AS PER BS 6364(FOR NONCOLD BOX APPLICATION). SEAL
6 20 % VALVE CASTINGS SHALL UNDERGO RADIOGRAPHIC EXAMINATION. OF MANUFACTURER
DATE 28/05/2001 30/06/2009 26/04/2018 10/04/2019 28/06/2019 51303

Page 2474 of 5886
VALVE MATERIAL
Page 16 of 121


WEDGE DISC SOLID/FLEXIBLE SS 316
BODY SEAT RING RENEWABLE/NON- SS 316

RENEWABLE
STREAM RINGS
BONNET BOLTS ASTM A193 GR.B7

SS316
RADIOGRAPHY VALVES.
SPECIAL SERVICE CAUSTIC SERVICE (MAX.TEMP.110 DEG.C) &
CONDITIONS AMINE
BACK SEAT & SS 316
SHOULDER
OTHERS O.S & Y.

PRESSURE
WITH AIR
NOTES
SIGNATURE
4 50% VALVE CASTINGS SHALL UNDERGO RADIOGRAPHIC EXAMINATION. &
5 VALVES AS PER API-600 AND TESTING AS PER API-598 ARE ALSO ACCEPTABLE. SEAL
OF MANUFACTURER
SHEET REV. NO. 4 5 6 7 8 9
DATE 28/05/2001 30/06/2009 26/04/2018 26/11/2018 10/04/2019 15/05/2019 51313

Page 2475 of 5886
VALVE MATERIAL
Page 17 of 121


A99A,


RENEWABLE
STREAM RINGS

SS 316
SPECIAL SERVICE
CONDITIONS
SHOULDER
OTHERS O.S & Y.

PRESSURE
WITH AIR
NOTES
SIGNATURE
4 RADIOGRAPHY OF VALVE CASTINGS NOT REQUIRED. &
OF MANUFACTURER
SHEET REV. NO. 4 5 6 7
DATE 28/05/2001 30/06/2009 26/04/2018 15/05/2019 51321

Page 2476 of 5886
VALVE MATERIAL
Page 18 of 121


TAG NO. : 51345 PIPING CLASS : A1K, A3K, STANDARD:
BODY CAST ASTM A 351 GR CF8
BONNET BOLTED ASTM A 351 GR.CF8

RENEWABLE
STREAM RINGS

SS316
RADIOGRAPHY VALVES.
CONDITIONS
BACK SEAT & SS 316
SHOULDER
OTHERS O.S & Y.

PRESSURE
WITH AIR
NOTES
SIGNATURE
4 10 % VALVE CASTINGS SHALL UNDERGO RADIOGRAPHIC EXAMINATION. &
5 ALL CASTINGS SHALL BE SOLUTION HEAT TREATED. SEAL
6 WELD REPAIRS, IF ANY, SHALL BE CARRIED OUT BEFORE SOLUTION HEAT TREATMENT. OF MANUFACTURER
7 VALVES AS PER API-600 AND TESTING AS PER API-598 ARE ALSO ACCEPTABLE.
DATE 28/05/2001 30/06/2009 26/04/2018 10/04/2019 15/05/2019 51345

Page 2477 of 5886
VALVE MATERIAL
Page 19 of 121


BODY SEAT RING RENEWABLE/NON- STELLITED

RENEWABLE
STREAM RINGS
BONNET BOLTS ASTM A320 GR B8 CLASS 2 (IMPACT TESTED)

SS316
RADIOGRAPHY VALVES.
SPECIAL SERVICE CRYO MIN. TEMP. -196 DEG.C.
CONDITIONS
BACK SEAT & SS316
SHOULDER
OTHERS O.S & Y.

PRESSURE
WITH AIR
NOTES
SIGNATURE
5 VALVE SHALL BE PROVIDED WITH EXTENDED BONNET AS PER BS 6364 (NON COLD BOX APPLICATION). SEAL
6 20 % VALVE CASTINGS SHALL UNDERGO RADIOGRAPHIC EXAMINATION. OF MANUFACTURER
7 VENDOR SHALL CERTIFY SUITABILITY OF THE VALVE FOR INTENDED SERVICE.
8 ALL VALVE CASTINGS SHALL BE SOLUTION HEAT TREATED.
9 WELD REPAIRS, IF ANY, SHALL BE CARRIED OUT BEFORE SOLUTION HEAT TREATMENT.
SHEET REV. NO. 2 3 4 5 6 7
DATE 02/01/1995 14/12/2000 28/05/2001 30/06/2009 26/04/2018 28/06/2019 51346

Page 2478 of 5886
VALVE MATERIAL
Page 20 of 121


TAG NO. : 51380 PIPING CLASS : J2A, STANDARD:
RATING : PN1.6 STANDARD : IS:14846 MFGRS CAT/FIG:
SIZE RANGE : 2.0" TO 6.0" ENDS : FLGD TO B-16.1 FF/125AARH RATING: ENDS:
BODY CAST IS 210 GR.FG 200
BONNET BOLTED IS 210 GR.FG 200
STEM NON RISING HIGH TENSILE BRASS IS:320 GR HT2/ IS-6912 GR.
FHTB2
WEDGE DISC SOLID/FLEXIBLE IS 210 GR. FG 200
BODY SEAT RING RENEWABLE/NON LEADED TIN BRONZE IS:318 GR.LTB2

RENEWABLE
STEM PACKING RENEWABLE WITH PTFE/ RUBBER IS: 638 TYPE B
VALVE OPEN ON
STREAM
BONNET BOLTS IS 1363 PT-1 CL. 4.6
BONNET NUTS IS 1363 PT-3 CL. 4.0
BONNET GASKET BUTYL RUBBER

RADIOGRAPHY VALVES.
SPECIAL SERVICE POTABLE WATER
CONDITIONS
BACK SEAT & IS:320 GR HT2
SHOULDER
OTHERS
WEDGE FACING LEADED TIN BRONZE IS 318 GR. LTB2/ IS: 320
RINGS & NUT GR. HT2
PRESSURE
TEST PRESSURE
WITH AIR
NOTES
SIGNATURE
4 TESTING SHALL BE AS PER IS:14846 &
5 FLANGE END SHALL BE FLAT FACE DRILLED TO ANSI B16.1, 125 # . SEAL
6 RADIOGRAPHY OF VALVE CASTINGS NOT REQUIRED. OF MANUFACTURER
DATE 14/12/2000 28/05/2001 16/04/2002 30/06/2009 26/04/2018 51380

Page 2479 of 5886
VALVE MATERIAL
Page 21 of 121


TAG NO. : 51401 PIPING CLASS : B13A, B1A,B32A, B41A, B45A, B45K, B6A, STANDARD:
B96A, B99A, B9A,

WEDGE DISC FLEXIBLE/SOLID 13% CR.STEEL FACING/13% CR.STEEL

RENEWABLE
STREAM RINGS

RADIOGRAPHY VALVES.
CONDITIONS
SHOULDER
OTHERS O.S & Y.

PRESSURE
WITH AIR
NOTES
SIGNATURE
4 10% VALVE CASTINGS UPTO 16" AND 100% VALVE CASTINGS 18" AND ABOVE SHALL UNDERGO &
RADIOGRAPHIC EXAMINATION. SEAL
5 VALVES AS PER API-600 AND TESTING AS PER API-598 ARE ALSO ACCEPTABLE. OF MANUFACTURER
DATE 30/06/2009 26/04/2018 26/11/2018 10/04/2019 15/05/2019 51401

Page 2480 of 5886
VALVE MATERIAL
Page 22 of 121


TAG NO. : 51402 PIPING CLASS : B22A, B2A, STANDARD:

RENEWABLE
STREAM RINGS

RADIOGRAPHY VALVES.
SHOULDER
OTHERS O.S & Y.

PRESSURE
WITH AIR
NOTES
SIGNATURE
9 VALVES AS PER API-600 AND TESTING AS PER API-598 & IBR ARE ALSO ACCEPTABLE.
SHEET REV. NO. 4 5 6 7 8 9
DATE 28/05/2001 30/06/2009 26/04/2018 26/11/2018 10/04/2019 15/05/2019 51402

Page 2481 of 5886
VALVE MATERIAL
Page 23 of 121


TAG NO. : 51403 PIPING CLASS : B42A, B46A, B4A, B52A, B53A, B54A, B97A, STANDARD:

RENEWABLE
STREAM RINGS

RADIOGRAPHY VALVES.
SPECIAL SERVICE LT MIN TEMP -45 DEG.C.
CONDITIONS
BACK SEAT & SS316
SHOULDER
OTHERS O.S & Y.

PRESSURE
WITH AIR
NOTES
SIGNATURE
5 VALVES SHALL BE PROVIDED WITH EXTENDED BONNET AS PER BS 6364 (NON COLD BOX APPLICATION) SEAL
DATE 28/05/2001 30/06/2009 26/04/2018 10/04/2019 28/06/2019 51403

Page 2482 of 5886
VALVE MATERIAL
Page 24 of 121


TAG NO. : 51413 PIPING CLASS : B19A, B29A, B79A, STANDARD:
BODY SEAT RING RENEWABLE/NON SS 316

RENEWABLE
STREAM RINGS

RADIOGRAPHY VALVES.
SPECIAL SERVICE CAUSTIC SERVICE(MAX.TEMP.110 DEG.C) &
CONDITIONS AMINE;
BACK SEAT & SS 316
SHOULDER
OTHERS O.S & Y.

PRESSURE
WITH AIR
NOTES
SIGNATURE
4 50% VALVE CASTINGS UPTO 16" AND 100% VALVE CASTINGS 18" AND ABOVE SHALL UNDERGO &
RADIOGRAPHIC EXAMINATION. SEAL
5 VALVES AS PER API-600 AND TESTING AS PER API-598 ARE ALSO ACCEPTABLE. OF MANUFACTURER
DATE 30/06/2009 26/04/2018 26/11/2018 10/04/2019 15/05/2019 51413

Page 2483 of 5886
VALVE MATERIAL
Page 25 of 121


TAG NO. : 51446 PIPING CLASS : B2K, STANDARD:

RENEWABLE/RENE
WABLE
STREAM RINGS
BONNET BOLTS ASTM A320 GR B8 CL 2 (IMPACT TESTED)
BONNET NUTS ASTM A194 GR 8 (IMPACT TESTED)

RADIOGRAPHY VALVES.
SPECIAL SERVICE CRYO MIN TEMP -196 DEG.C.
CONDITIONS
BACK SEAT & SS316
SHOULDER
OTHERS O.S & Y.

PRESSURE
WITH AIR
NOTES
SIGNATURE
7 VENDOR SHALL CERTIFY SUITABILITY OF THE VALVE FOR INTENDED SERVICE.
8 ALL CASTINGS SHALL BE SOLUTION HEAT TREATED.
SHEET REV. NO. 2 3 4 5 6 7
DATE 02/01/1995 14/12/2000 28/05/2001 30/06/2009 26/04/2018 28/06/2019 51446

Page 2484 of 5886
VALVE MATERIAL
Page 26 of 121


TAG NO. : 51501 PIPING CLASS : D1A, D96A, D9A, STANDARD:
WEDGE DISC FLEXIBLE/SOLID STELLITED

RENEWABLE
STREAM RINGS

RADIOGRAPHY VALVES.
CONDITIONS
SHOULDER
OTHERS O.S & Y.

PRESSURE
WITH AIR
NOTES
SIGNATURE
4 100% VALVE CASTINGS SHALL UNDERGO RADIOGRAPHIC EXAMINATION. &
OF MANUFACTURER
DATE 02/01/1995 14/12/2000 28/05/2001 30/06/2009 26/04/2018 51501

Page 2485 of 5886
VALVE MATERIAL
Page 27 of 121



RENEWABLE
STREAM RINGS
BONNET GASKET SPIRAL WOUND SS316-GRAFOIL FILLER

RADIOGRAPHY VALVES.
SPECIAL SERVICE LT MIN TEMP -45 DEG. C.
CONDITIONS
BACK SEAT & SS316
SHOULDER
OTHERS O.S & Y.

PRESSURE
WITH AIR
NOTES
SIGNATURE
6 100% VALVE CASTINGS SHALL UNDERGO RADIOGRAPHIC EXAMINATION. OF MANUFACTURER
DATE 28/05/2001 30/06/2009 26/04/2018 10/04/2019 28/06/2019 51503

Page 2486 of 5886
VALVE MATERIAL
Page 28 of 121

GLOBE VALVE SPECIFICATION MANUF'S OFFER

A3A, A41A, A49A, A69A, A6A, A91A, A92A,
A93A, A94A, A95A, A99A, A9A, B13A, B1A, MFGRS CAT/FIG:
B32A, B41A, B49A, B6A, B96A, B99A, B9A, RATING: ENDS:
D1A, D96A, D9A,

DISC LOOSE PLUG TYPE STELLITED

RENEWABLE
STREAM RINGS
HAND WHEEL RISING MALLEABLE IRON/CAST ST/FAB.ST/DUCT. IRON
OTHERS OS&Y

CONDITION
SHOULDER

PRESSURE
WITH AIR
NOTES
SIGNATURE
&
SEAL
OF MANUFACTURER
DATE 02/01/1995 14/12/2000 28/05/2001 30/06/2009 26/04/2018 52001

Page 2487 of 5886
VALVE MATERIAL
Page 29 of 121



RENEWABLE
STREAM RINGS
BONNET GASKET SP WND SS316 WITH GRAFOIL FILLER
OTHERS OS&Y

CONDITION MAX TEMP. 427 DEG.C.
SHOULDER

PRESSURE
WITH AIR
NOTES
SIGNATURE
DATE 02/01/1995 14/12/2000 28/05/2001 30/06/2009 26/04/2018 52002

Page 2488 of 5886
VALVE MATERIAL
Page 30 of 121


B34A, B42A, B43A, B4A, B52A, B53A, B54A,
B97A, D42A, D4A, D97A, MFGRS CAT/FIG:

BODY FORGED ASTM A 350 GR.LF2 CL. 1
BONNET BOLTED ASTM A 350 GR.LF2 CL. 1
STEM RISING SS316 (NO CASTING)

RENEWABLE
STREAM RINGS
BONNET NUTS ASTM A194 GR 4 /GR 7
BONNET GASKET SP WND SS316 WITH GRAFOIL FILLER
OTHERS OS&Y
SPECIAL SERVICE LT MIN. TEMP. -45 DEG.C.

CONDITION
SHOULDER

PRESSURE
WITH AIR
NOTES
SIGNATURE
DATE 28/05/2001 30/06/2009 26/04/2018 10/04/2019 28/06/2019 52003

Page 2489 of 5886
VALVE MATERIAL
Page 31 of 121


D79A,


RENEWABLE
STREAM RINGS
BONNET GASKET SPIRAL WOUND SS316 WITH GRAFOIL FILLER
OTHERS O.S & Y.

CONDITION AMINE
SHOULDER

PRESSURE
WITH AIR
NOTES
SIGNATURE
&
SEAL
OF MANUFACTURER
SHEET REV. NO. 4 5 6 7 8 9
DATE 28/05/2001 23/10/2003 30/06/2009 26/04/2018 26/11/2018 10/04/2019 52013

Page 2490 of 5886
VALVE MATERIAL
Page 32 of 121


TAG NO. : 52045 PIPING CLASS : A1K, A3K, A47K, A48K, B1K, D1K, D82K, STANDARD:

RENEWABLE
STREAM RINGS
OTHERS OS&Y
SPECIAL SERVICE MAX TEMP 454 DEG. C.

CONDITION
SHOULDER

PRESSURE
WITH AIR
NOTES
SIGNATURE
&
SEAL
OF MANUFACTURER
DATE 30/06/2009 26/04/2018 26/11/2018 10/04/2019 15/05/2019 52045

Page 2491 of 5886
VALVE MATERIAL
Page 33 of 121



RENEWABLE
STREAM RINGS
OTHERS OS&Y
SPECIAL SERVICE CRYO MIN TEMP -196 DEG. C.

CONDITIONS
SHOULDER

PRESSURE
WITH AIR
NOTES
SIGNATURE
5 VALVE SHALL BE PROVIDED WITH EXTENDED BONNET AS PER BS 6364 (NON COLD BOX APPLICATION) SEAL
6 VENDOR SHALL CERTIFY SUITABILITY OF THE VALVE FOR THE INTENDED SERVICE. OF MANUFACTURER
DATE 14/12/2000 28/05/2001 30/06/2009 26/04/2018 28/06/2019 52046

Page 2492 of 5886
VALVE MATERIAL
Page 34 of 121


BONNET BOLTED/SCREWED IS 318 GR.LTB2
STEM RISING IS 320 ALLOY HT2 HIGH TENSILE BRASS
DISC LOOSE PLUG TYPE IS 318 GR.LTB2
BODY SEAT RING RENEWABLE/NON IS 318 GR.LTB2

RENEWABLE
STEM PACKING RENEWABLE WITH PTFE
VALVE OPEN ON
STREAM
BONNET BOLTS IS 1367 CLAUSE 4.6 & 4 / ASTM A 193 GR B7
BONNET NUTS IS 1367 CLAUSE 4.6 & 4 / ASTM A 194 GR 2H
BONNET GASKET RUBBER
OTHERS
SPECIAL SERVICE MAX TEMP 75 DEG CENT.

CONDITION
BACK SEAT & IS 320 GR HT2
SHOULDER

PRESSURE
TEST PRESSURE
WITH AIR
NOTES
SIGNATURE
4 TESTING SHALL BE AS PER BS EN 12266-1/ IS STD. &
5 SCREWED ENDS OF VALVES SHALL BE FEMALE TYPE AS PER ANSI B 1.20.1 SEAL
OF MANUFACTURER
DATE 14/12/2000 28/05/2001 30/06/2009 26/04/2018 52080

Page 2493 of 5886
VALVE MATERIAL
Page 35 of 121


TAG NO. : 52301 PIPING CLASS : A11A, A13A, A1A, A41A, A45A, A45K, A49A, STANDARD:
A6A, A93A, A9A,
RATING : 150 STANDARD : BS-1873 MFGRS CAT/FIG:

DISC LOOSE PLUG 13% CR STEEL FACING/13% CR STEEL

TYPE/BALL TYP
RENEWABLE
STREAM RINGS
BONNET GASKET SP WND SS316-GRAFOIL FILLER/ CORRUGATED

SS316
RADIOGRAPHY VALVES.
OTHERS OS&Y

CONDITION
SHOULDER

PRESSURE
WITH AIR
NOTES
SIGNATURE
4 TESTING SHALL BE AS PER BS EN 12266-1. &
5 5% VALVE CASTINGS SHALL UNDERGO RADIOGRAPHIC EXAMINATION. SEAL
OF MANUFACTURER
DATE 30/06/2009 26/04/2018 26/11/2018 10/04/2019 15/05/2019 52301

Page 2494 of 5886
VALVE MATERIAL
Page 36 of 121


DISC LOOSE PLUG 13% CR STEEL FACING/13% CR. STEEL

TYPE/BALL TYP
RENEWABLE
STREAM RINGS

SS316
RADIOGRAPHY VALVES.
OTHERS OS&Y

CONDITION MAX TEMP. 371 DEG.C.
SHOULDER

PRESSURE
WITH AIR
NOTES
SIGNATURE
4 TESTING SHALL BE AS PER BS EN 12266-1 & IBR. &
7 5% VALVE CASTINGS SHALL UNDERGO RADIOGRAPHIC EXAMINATION.
DATE 30/06/2009 26/04/2018 26/11/2018 10/04/2019 15/05/2019 52302

Page 2495 of 5886
VALVE MATERIAL
Page 37 of 121


DISC LOOSE PLUG STELLITED

TYPE/BALL TYP
RENEWABLE
STREAM RINGS
BONNET BOLTS ASTM A320 GR.L7
BONNET NUTS ASTM A194 GR.4 / GR.7

SS316
RADIOGRAPHY VALVES.
OTHERS OS&Y
SPECIAL SERVICE LT MIN TEMP. -45 DEG. C.

CONDITION
BACK SEAT & SS316
SHOULDER
PRESSURE
WITH AIR
NOTES
SIGNATURE
4 TESTING SHALL BE AS PER BS EN 12266-1 & BS-6364. &
5 VALVES SHALL BE PROVIDED WITH EXTENDED BONNET AS PER BS 6364(FOR NONCOLD BOX APPLICATION). SEAL
6 20% VALVE CASTING SHALL UNDERGO RADIOGRAPHIC EXAMINATION. OF MANUFACTURER
DATE 28/05/2001 30/06/2009 26/04/2018 10/04/2019 28/06/2019 52303

Page 2496 of 5886
VALVE MATERIAL
Page 38 of 121


DISC LOOSE PLUG SS 316

TYPE/BALL TYP
RENEWABLE
STREAM RINGS

SS316
RADIOGRAPHY VALVES.
OTHERS OS&Y

CONDITION AMINE;
BACK SEAT & SS 316
SHOULDER

PRESSURE
WITH AIR
NOTES
SIGNATURE
5 50% OF VALVE CASTING SHALL UNDERGO RADIOGRAPHIC EXAMINATION. SEAL
OF MANUFACTURER
DATE 30/06/2009 26/04/2018 26/11/2018 10/04/2019 15/05/2019 52313

Page 2497 of 5886
VALVE MATERIAL
Page 39 of 121


A99A,


TYPE/BALL TYP
RENEWABLE
STREAM RINGS

SS316
OTHERS OS&Y
SPECIAL SERVICE
CONDITION
SHOULDER

PRESSURE
WITH AIR
NOTES
SIGNATURE
5 RADIOGRAPHY OF VALVE CASTINGS NOT REQUIRED. SEAL
OF MANUFACTURER
DATE 14/12/2000 28/05/2001 30/06/2009 26/04/2018 15/05/2019 52321

Page 2498 of 5886
VALVE MATERIAL
Page 40 of 121



TYPE/BALL TYP
RENEWABLE
STREAM RINGS
BONNET GASKET SP WND SS316 WITH GRAFOIL

FILLER/CORRUGATED SS316
RADIOGRAPHY VALVES.
OTHERS OS&Y

CONDITION
BACK SEAT & SS 316
SHOULDER
PRESSURE
WITH AIR
NOTES
SIGNATURE
6 ALL CASTINGS SHALL BE SOLUTION HEAT TREATED. OF MANUFACTURER
SHEET REV. NO. 4 5 6 7 8 9
DATE 28/05/2001 30/06/2009 26/04/2018 26/11/2018 10/04/2019 15/05/2019 52345

Page 2499 of 5886
VALVE MATERIAL
Page 41 of 121



TYPE/BALL TYP
RENEWABLE
STREAM RINGS

SS316
RADIOGRAPHY VALVES.
OTHERS OS&Y
SPECIAL SERVICE CRYO MIN TEMP. -196 DEG. C.

CONDITIONS
BACK SEAT & SS316
SHOULDER

PRESSURE
WITH AIR
NOTES
SIGNATURE
4 TESTING SHALL BE AS PER BS EN 12266-1 & BS 6364. &
7 VENDOR SHALL CERTIFY SUITABILITY OF VALVE FOR INTENDED SERVICE
DATE 14/12/2000 28/05/2001 30/06/2009 26/04/2018 28/06/2019 52346

Page 2500 of 5886
VALVE MATERIAL
Page 42 of 121


TAG NO. : 52401 PIPING CLASS : B13A, B1A,B41A, B45A, B45K, B49A, B6A, STANDARD:
B96A, B99A, B9A,


TYPE/BALL TYP
RENEWABLE
STREAM RINGS

RADIOGRAPHY VALVES.
OTHERS OS&Y

CONDITION
SHOULDER

PRESSURE
WITH AIR
NOTES
SIGNATURE
OF MANUFACTURER
DATE 30/06/2009 26/04/2018 26/11/2018 10/04/2019 15/05/2019 52401

Page 2501 of 5886
VALVE MATERIAL
Page 43 of 121


DISC LOOSE PLUG 13% CR STEEL FACING/13% CR. STEEL

TYPE/BALL TYP
RENEWABLE
STREAM RINGS

RADIOGRAPHY VALVES.
OTHERS OS&Y

CONDITION MAX. TEMP. 427 DEG.C.
SHOULDER
PRESSURE
WITH AIR
NOTES
SIGNATURE
4 TESTING SHALL BE AS PER BS EN 12266-1 & IBR. &
SHEET REV. NO. 4 5 6 7 8 9
DATE 28/05/2001 30/06/2009 26/04/2018 26/11/2018 10/04/2019 15/05/2019 52402

Page 2502 of 5886
VALVE MATERIAL
Page 44 of 121



TYPE/BALL TYP
RENEWABLE
STREAM RINGS
BONNET NUTS ASTM A194 GR 4 / GR.7

RADIOGRAPHY VALVES.
OTHERS OS&Y

CONDITION
BACK SEAT & SS316
SHOULDER
PRESSURE
WITH AIR
NOTES
SIGNATURE
4 TESTING SHALL BE AS PER BS EN 12266-1 & BS-6364 &
DATE 28/05/2001 30/06/2009 26/04/2018 10/04/2019 28/06/2019 52403

Page 2503 of 5886
VALVE MATERIAL
Page 45 of 121



TYPE/BALL TYP
RENEWABLE
STREAM RINGS

RADIOGRAPHY VALVES.
OTHERS OS&Y

CONDITION AMINE
BACK SEAT & SS 316
SHOULDER

PRESSURE
WITH AIR
NOTES
SIGNATURE
OF MANUFACTURER
DATE 30/06/2009 26/04/2018 26/11/2018 10/04/2019 15/05/2019 52413

Page 2504 of 5886
VALVE MATERIAL
Page 46 of 121



TYPE/BALL TYP
RENEWABLE
STREAM RINGS

RADIOGRAPHY VALVES.
OTHERS OS&Y

CONDITIONS
BACK SEAT & SS316
SHOULDER

PRESSURE
WITH AIR
NOTES
SIGNATURE
7 VENDOR SHALL CERTIFY SUITABILITY OF THE VALVE FOR THE INTENDED SERVICE.
9 WELD REPAIR, IF ANY, SHALL BE CARRIED OUT BEFORE SOLUTION HEAT TREATMENT.
SHEET REV. NO. 2 3 4 5 6 7
DATE 02/01/1995 14/12/2000 28/05/2001 30/06/2009 26/04/2018 28/06/2019 52446

Page 2505 of 5886
VALVE MATERIAL
Page 47 of 121



TYPE/BALL TYP
RENEWABLE
STREAM RINGS

RADIOGRAPHY VALVES.
OTHERS OS&Y
SPECIAL SERVICE MAX TEMP 427 DEG C.

CONDITION
SHOULDER

PRESSURE
WITH AIR
NOTES
SIGNATURE
OF MANUFACTURER
DATE 02/01/1995 14/12/2000 28/05/2001 30/06/2009 26/04/2018 52501

Page 2506 of 5886
VALVE MATERIAL
Page 48 of 121



TYPE/BALL TYP
RENEWABLE
STREAM RINGS

RADIOGRAPHY VALVES.
OTHERS OS&Y

CONDITION
BACK SEAT & SS316
SHOULDER
PRESSURE
WITH AIR
NOTES
SIGNATURE
DATE 28/05/2001 30/06/2009 26/04/2018 10/04/2019 28/06/2019 52503

Page 2507 of 5886
VALVE MATERIAL
Page 49 of 121

CHECK VALVE SPECIFICATION MANUF'S OFFER

A3A, A41A, A49A, A6A, A91A, A92A, A93A,
A94A, A95A, A99A, A9A, B13A, B1A, B32A, MFGRS CAT/FIG:
B41A, B49A, B6A, B96A, B99A, B9A, D1A, RATING: ENDS:
D96A, D9A,

COVER BOLTED ASTM A 105
DISC/PISTON STELLITED

RENEWABLE
DISC HINGE/HINGE
PIN
COVER STUD BOLT ASTM A193 GR B7
COVER NUT ASTM A194 GR 2H
COVER GASKET SP WND SS316-GRAFOIL FILLER
TYPE LIFT CHECK TYPE
OTHERS

CONDITIONS
WASHER,NUT,PIN

PRESSURE
TEST PRESSURE
WITH AIR
NOTES
SIGNATURE
4 VALVES SHALL BE OF STANDARD BORE DESIGN. &
SEAL
OF MANUFACTURER
DATE 02/01/1995 14/12/2000 28/05/2001 30/06/2009 26/04/2018 53001

Page 2508 of 5886
VALVE MATERIAL
Page 50 of 121



RENEWABLE
DISC HINGE/HINGE
PIN
OTHERS

WASHER,NUT,PIN

PRESSURE
TEST PRESSURE
WITH AIR
NOTES
SIGNATURE
6 ALL VALVES SHALL BE PAINTED RED ON BODY-COVER JOINT. OF MANUFACTURER
7 VALVES SHALL BE OF STANDARD BORE DESIGN.
DATE 02/01/1995 14/12/2000 28/05/2001 30/06/2009 26/04/2018 53002

Page 2509 of 5886
VALVE MATERIAL
Page 51 of 121


TAG NO. : 53003 PIPING CLASS : A34A, A42A, A4A,A52A, A53A, A54A, B42A, STANDARD:
B4A, B52A, B53A, B54A, B97A, D42A, D4A,
D97A, MFGRS CAT/FIG:

BODY FORGED ASTM A 350 GR.LF2 CL.1
COVER BOLTED ASTM A 350 GR.LF2 CL.1
BODY SEAT RING RENWABLE/NON- STELLITED

RENEWABLE
DISC HINGE/HINGE
PIN
COVER STUD BOLT ASTM A320 GR L7
COVER NUT ASTM A194 GR 4/GR 7
OTHERS
SPECIAL SERVICE LT MIN TEMP -45 DEG.C.

CONDITIONS
WASHER,NUT,PIN

PRESSURE
TEST PRESSURE
WITH AIR
NOTES
SIGNATURE
5 VALVES TO COMPLY WITH DESIGN REQUIREMENTS OF BS-6364 ALSO. SEAL
6 VALVES SHALL BE OF STANDARD BORE DESIGN. OF MANUFACTURER
DATE 28/05/2001 30/06/2009 26/04/2018 10/04/2019 28/06/2019 53003

Page 2510 of 5886
VALVE MATERIAL
Page 52 of 121


D79A,


RENEWABLE
DISC HINGE/HINGE
PIN
OTHERS

CONDITIONS AMINE
WASHER,NUT,PIN

PRESSURE
TEST PRESSURE
WITH AIR
NOTES
SIGNATURE
SEAL
OF MANUFACTURER
SHEET REV. NO. 2 3 4 5 6 7
DATE 02/01/1995 14/12/2000 28/05/2001 23/10/2003 30/06/2009 26/04/2018 53013

Page 2511 of 5886
VALVE MATERIAL
Page 53 of 121


TAG NO. : 53045 PIPING CLASS : A1K, A3K, B1K, D1K, D82K, STANDARD:
COVER BOLTED ASTM A 182 GR.F304

RENEWABLE
DISC HINGE/HINGE
PIN
OTHERS

CONDITIONS
WASHER,NUT,PIN

PRESSURE
TEST PRESSURE
WITH AIR
NOTES
SIGNATURE
SEAL
OF MANUFACTURER
DATE 02/01/1995 14/12/2000 28/05/2001 30/06/2009 26/04/2018 53045

Page 2512 of 5886
VALVE MATERIAL
Page 54 of 121


COVER BOLTED ASTM A 182 GR.F304

RENEWABLE
DISC HINGE/HINGE
PIN
COVER STUD BOLT ASTM A320 GR B8 CL 2 (IMPACT TESTED)
COVER NUT ASTM A194 GR 8 (IMPACT TESTED)
OTHERS

CONDITIONS
WASHER,NUT,PIN

PRESSURE
TEST PRESSURE
WITH AIR
NOTES
SIGNATURE
5 VENDOR SHALL CERTIFY SUITABILITY OF THE VALVE FOR INTENDED SERVICE. SEAL
7 VALVES SHALL BE OF STANDARD BORE DESIGN.
DATE 02/01/1995 14/12/2000 28/05/2001 30/06/2009 26/04/2018 53046

Page 2513 of 5886
VALVE MATERIAL
Page 55 of 121


COVER BOLTED IS 318 GR.LTB2
DISC/PISTON IS 318 GR LTB2
BODY SEAT RING RENEWABLE IS 318 GR LTB2
DISC HINGE/HINGE
PIN
COVER STUD BOLT IS 1367 CLAUSE 4.6 & 4 / ASTM A 193 GR B7
COVER NUT IS 1367 CLAUSE 4.6 & 4 / ASTM A 194 GR 2H
COVER GASKET RUBBER
OTHERS
SPECIAL SERVICE MAX TEMP 75 DEG CENT.

CONDITIONS
WASHER,NUT,PIN IS 320 ALLOY HT2

PRESSURE
TEST PRESSURE
WITH AIR
NOTES
SIGNATURE
4 TESTING SHALL BE AS PER BS EN 12266-1 / IS 778 CL2. &
SEAL
OF MANUFACTURER
DATE 14/12/2000 28/05/2001 06/08/2002 30/06/2009 26/04/2018 53080

Page 2514 of 5886
VALVE MATERIAL
Page 56 of 121


TAG NO. : 53301 PIPING CLASS : A11A, A13A, A1A,
A32A, A41A, A45A, A45K, STANDARD:
A49A, A6A, A93A, A9A,
RATING : 150 STANDARD : BS 1868 MFGRS CAT/FIG:

COVER BOLTED ASTM A 216 GR.WCB
DISC FACED WITH 13% CR.STEEL/13% CR.STEEL

RENEWABLE
HINGE PIN 13% CR STEEL(NO CASTING)
DISC HINGE 13% CR STEEL/A216 GR WCB/A515 GR 70
COVER GASKET SP WND SS316-GRAFOIL FILLER/CORRUGATED

SS316
BY PASSES
TYPE SWING CHECK TYPE

RADIOGRAPHY VALVES.
OTHERS

CONDITIONS
WASHER,NUT,PIN 13% CR STEEL(NO CASTING)/SS410/SS304

PRESSURE
TEST PRESSURE
WITH AIR
NOTES
SIGNATURE
OF MANUFACTURER
DATE 30/06/2009 26/04/2018 26/11/2018 10/04/2019 15/05/2019 53301

Page 2515 of 5886
VALVE MATERIAL
Page 57 of 121


DISC 13% CR STEEL FACING/13% CR. STEEL

RENEWABLE
DISC HINGE 13% CR. STEEL/A216 GR WCB/A515 GR 70

SS316
BY PASSES

RADIOGRAPHY VALVES.
OTHERS

CONDITIONS MAX TEMP 371 DEG.C.

PRESSURE
TEST PRESSURE
WITH AIR
NOTES
SIGNATURE
4 TESTING SHALL BE AS PER BS EN 12266-1 & IBR &
DATE 30/06/2009 26/04/2018 26/11/2018 10/04/2019 15/05/2019 53302

Page 2516 of 5886
VALVE MATERIAL
Page 58 of 121


COVER BOLTED ASTM A 352 GR.LCB
DISC STELLITED

RENEWABLE
HINGE PIN SS316(NO CASTING)
DISC HINGE A352 GR LCB/SS304/SSS316
BY PASSES

RADIOGRAPHY VALVES.
OTHERS
SPECIAL SERVICE LT MIN TEMP. -45 DEG. C.

CONDITIONS
WASHER,NUT,PIN SS316 (NO CASTING)

PRESSURE
TEST PRESSURE
WITH AIR
NOTES
SIGNATURE
DATE 28/05/2001 30/06/2009 26/04/2018 10/04/2019 28/06/2019 53303

Page 2517 of 5886
VALVE MATERIAL
Page 59 of 121


DISC FACED WITH SS 316/ SS316
BODY SEAT RING RENEWABLE/NON SS 316 FACING/ SS316

RENEWABLE
HINGE PIN SS316 (NO CASTING)
DISC HINGE SS 316/A216 GR WCB/A515 GR 70
BY PASSES

RADIOGRAPHY VALVES.
OTHERS

CONDITIONS AMINE
WASHER,NUT,PIN

PRESSURE
TEST PRESSURE
WITH AIR
NOTES
SIGNATURE
OF MANUFACTURER
DATE 30/06/2009 26/04/2018 26/11/2018 10/04/2019 15/05/2019 53313

Page 2518 of 5886
VALVE MATERIAL
Page 60 of 121


RATING : 150 STANDARD : API-594 MFGRS CAT/FIG:
SIZE RANGE : 26.0" TO 48.0" ENDS : FLGD TO AWWAC207 FF/125AARH RATING: ENDS:
BODY FORGED / CAST ASTM A 105 / A 216GR.WCB
PLATES (DISCS) SPRING LOADED ASTM A 105 / A 216GR.WCB
PLATE SEAT INTEGRAL 13% CR STEEL FACING/OVERLAY
BODY SEAT INTEGRAL STELLITED
STOP PIN SS316/13% CR STEEL(NO CASTING)
HINGE PIN SS316/13% CR STEEL(NO CASTING)
SPRING INCONEL X-750
PLATE SUPPORT SS316/13% CR.STEEL

SLEEVE
TYPE DUAL
PLATE,RETAINERLE
SS
OTHER WETTED SS316/13% CR.STEEL

PARTS
SPECIAL SERVICE WATER (COOLING, RAW ETC)
CONDITIONS
WASHERS, 13% CR STEEL/SS316
BEARINGS

PRESSURE
TEST PRESSURE
WITH AIR
NOTES
SIGNATURE
4 VALVES SHALL BE DOUBLE FLANGED TYPE WITH FACE-TO-FACE DIMENSIONS AS PER API-594. IN THE CASE &
OF SIZES NOT SPECIFIED IN API-594, FACE-TO-FACE DIMENSION MAY BE AS PER MANUFACTURER'S SEAL
STANDARD. OF MANUFACTURER
5 TESTING SHALL BE AS PER API-598.
6 VENDOR SHALL CONFIRM THE SUITABILITY/FUNCTIONING OF THE VALVE AS PER THE PIPING LAYOUT
ATTACHED WITH THE MR.
7 VENDOR TO ENSURE SUITABILITY OF VALVE/DESIGN AGAINST HIGH VELOCITY DUE TO THROTTLING OF
BUTTERFLY VALVE DOWNSTREAM OF CHECK VALVE.
8 DIRECTION OF FLOW AND TOP OF VALVE SHALL BE INDICATED ON EACH VALVE.
SHEET REV. NO. 0 1
DATE 26/11/2018 15/05/2019 53316

Page 2519 of 5886
VALVE MATERIAL
Page 61 of 121

NOTES
9 VALVE SHALL HAVE INDEPENDENT PLATE SUSPENSION (HINGE & SUPPORT SLEEVE DESIGN), ENSURE
REDUCTION OF FRICTION AND ALLOW BOTH PLATES TO CLOSE AT THE SAME TIME.
10 VALVE SHALL HAVE INDEPENDENT SPRING FOR EACH PLATE TO OPEN AND CLOSE WITHOUT SEAT
SCRUBBING. CONTACT SURFACE ON PLATES FOR SPRING SHALL BE SS316 OVERLAY GROUND SMOOTH.
12 RADIOGRAPHY OF VALVE CASTINGS NOT REQUIRED.
SHEET REV. NO. 0 1
DATE 26/11/2018 15/05/2019 53316

Page 2520 of 5886
VALVE MATERIAL
Page 62 of 121


A99A,
RATING : 150 STANDARD : BS 1868 MFGRS CAT/FIG:


RENEWABLE
DISC HINGE 13% CR STEEL/A216 GR WCB/A515 GR 70

SS316
BY PASSES
OTHERS
SPECIAL SERVICE
CONDITIONS

PRESSURE
TEST PRESSURE
WITH AIR
NOTES
SIGNATURE
5 RADIOGRAPHY OF VALVE CASTINGS NOT REQUIRED. SEAL
OF MANUFACTURER
DATE 14/12/2000 28/05/2001 30/06/2009 26/04/2018 15/05/2019 53321

Page 2521 of 5886
VALVE MATERIAL
Page 63 of 121


COVER BOLTED ASTM A 351 GR.CF8
DISC SS 316

RENEWABLE
DISC HINGE SS 316
BY PASSES

RADIOGRAPHY VALVES.
OTHERS

CONDITIONS
WASHER,NUT,PIN SS 316 (NO CASTING)

PRESSURE
TEST PRESSURE
WITH AIR
NOTES
SIGNATURE
6 ALL CASTINGS SHALL BE SOLUTION HEAT TREATED. OF MANUFACTURER
DATE 30/06/2009 26/04/2018 26/11/2018 10/04/2019 15/05/2019 53345

Page 2522 of 5886
VALVE MATERIAL
Page 64 of 121


DISC STELLITED

RENEWABLE
DISC HINGE SS 316
HINGE PIN SS304/ SS316 (NO CASTING)
COVER NUT ASTM A194 GR 8 (IMPACT TESTED)
BY PASSES

RADIOGRAPHY VALVES.
OTHERS

CONDITIONS

PRESSURE
TEST PRESSURE
WITH AIR
NOTES
SIGNATURE
6 VENDOR SHALL CERTIFY SUITABILITY OF THE VALVE FOR INTENDED SERVICE. OF MANUFACTURER
7 ALL CASTINGS SHALL BE SOLUTION HEAT TREARED.
DATE 14/12/2000 28/05/2001 30/06/2009 26/04/2018 28/06/2019 53346

Page 2523 of 5886
VALVE MATERIAL
Page 65 of 121


TAG NO. : 53380 PIPING CLASS : J2A, STANDARD:
RATING : PN1.6 STANDARD : IS:5312 (PT-1) MFGRS CAT/FIG:
SIZE RANGE : 2.0" TO 6.0" ENDS : FLGD TO B-16.1 FF/125AARH RATING: ENDS:
BODY CAST IS 210 GR.FG 200
COVER BOLTED IS 210 GR.FG 200
DISC/PISTON IS 210 GR.FG 200
BODY SEAT RING RENEWABLE LEADED TIN BRONZE IS 318 GR LTB2
DISC HINGE IS:210 GR.FG 200
HINGE PIN HIGH TENSILE BRASS IS 320 GR. HTB2
COVER STUD BOLT IS 1363 PT-1 CL. 4.6
COVER NUT IS 1363 PT-3 CL.4.0
COVER GASKET RUBBER
BY PASSES

RADIOGRAPHY VALVES.
OTHERS
SPECIAL SERVICE
CONDITIONS
DOOR FACES NATURAL OR SYNTHENIC MOULDED RUBBER

PRESSURE
TEST PRESSURE
WITH AIR
NOTES
SIGNATURE
5 FLANGE END SHALL BE FLAT FACE DRILLED TO ANSI B16.1, 125# SEAL
6 FOR 6" SIZE VALVE RATING SHALL BE PN 1.0 OF MANUFACTURER
DATE 02/01/1995 14/12/2000 28/05/2001 30/06/2009 26/04/2018 53380

Page 2524 of 5886
VALVE MATERIAL
Page 66 of 121


TAG NO. : 53401 PIPING CLASS : B13A, B1A,
B32A, B41A, B45A, B45K, B49A, STANDARD:
B6A, B96A, B99A, B9A,


RENEWABLE
DISC HINGE 13% CR STEEL/A216 GR WCB/A515 GR. 70
BY PASSES

RADIOGRAPHY VALVES.
OTHERS

CONDITIONS
WASHER,NUT,PIN 13% CR STEEL(NO CASTING)/ SS 410/SS 304

PRESSURE
TEST PRESSURE
WITH AIR
NOTES
SIGNATURE
5 10% VALVE CASTINGS UPTO 16" AND 100% VALVE CASTINGS 18" AND ABOVE SHALL UNDERGO SEAL
RADIOGRAPHIC EXAMINATION. OF MANUFACTURER
DATE 30/06/2009 26/04/2018 26/11/2018 10/04/2019 15/05/2019 53401

Page 2525 of 5886
VALVE MATERIAL
Page 67 of 121


DISC 13% CR STEEL FACING/13% CR. STEEL

RENEWABLE
DISC HINGE 13% CR. STEEL/A216 GR WCB/A515 GR 70
BY PASSES

RADIOGRAPHY VALVES.
OTHERS

CONDITIONS MAX TEMP. 427 DEG.C.
WASHER,NUT,PIN 13% CR STEEL(NO CASTING)/SS 410/SS 304

PRESSURE
TEST PRESSURE
WITH AIR
NOTES
SIGNATURE
4 TESTING SHALL BE AS PER BS EN 12266-1 & IBR &
6 ALL VALVES SHALL BE PAINTED RED ON BODY-COVER JOINT. OF MANUFACTURER
DATE 30/06/2009 26/04/2018 26/11/2018 10/04/2019 15/05/2019 53402

Page 2526 of 5886
VALVE MATERIAL
Page 68 of 121


DISC STELLITED
BODY SEAT RING RENWABLE/NON- STELLITED

RENEWABLE
DISC HINGE SS 304/SS 316/A352 GR LCB
BY PASSES

RADIOGRAPHY VALVES.
OTHERS

CONDITIONS

PRESSURE
TEST PRESSURE
WITH AIR
NOTES
SIGNATURE
DATE 28/05/2001 30/06/2009 26/04/2018 10/04/2019 28/06/2019 53403

Page 2527 of 5886
VALVE MATERIAL
Page 69 of 121


DISC SS 316

RENEWABLE
DISC HINGE SS316/A 216 WCB/A515 GR 70
BY PASSES

RADIOGRAPHY VALVES.
OTHERS

CONDITIONS AMINE
WASHER,NUT,PIN

PRESSURE
TEST PRESSURE
WITH AIR
NOTES
SIGNATURE
DATE 30/06/2009 26/04/2018 26/11/2018 10/04/2019 15/05/2019 53413

Page 2528 of 5886
VALVE MATERIAL
Page 70 of 121


DISC STELLITED

RENEWABLE/RENE
WABLE
HINGE PIN SS 316 (NO CASTING)
DISC HINGE SS 316
COVER NUT ASTM A194 GR B8 (IMPACT TESTED)
BY PASSES

RADIOGRAPHY VALVES.
OTHERS

CONDITIONS

PRESSURE
TEST PRESSURE
WITH AIR
NOTES
SIGNATURE
6 VENDOR SHALL CERTIFY SUITABILITY OF THE VALVE FOR INTENDED SERVICE
7 ALL CASTINGS SHALL BE SOLUTION HEAT TREATED
8 WELD REPAIR, IF ANY, SHALL BE CARRIED OUT BEFORE SOLUTION HEAT TREATMENT FOR VALVES.
DATE 14/12/2000 28/05/2001 30/06/2009 26/04/2018 28/06/2019 53446

Page 2529 of 5886
VALVE MATERIAL
Page 71 of 121


DISC STELLITED

RENEWABLE
DISC HINGE 13% CR STEEL/A 216 GR WCB
BY PASSES

RADIOGRAPHY VALVES.
OTHERS

CONDITIONS
WASHER,NUT,PIN 13% CR STEEL(NO CASTING)

PRESSURE
TEST PRESSURE
WITH AIR
NOTES
SIGNATURE
OF MANUFACTURER
DATE 02/01/1995 14/12/2000 28/05/2001 30/06/2009 26/04/2018 53501

Page 2530 of 5886
VALVE MATERIAL
Page 72 of 121


DISC STELLITED

RENEWABLE
DISC HINGE SS304/ SS316/ ASTM A 352 LCB
HINGE PIN SS316(NO CASTING)
BY PASSES

RADIOGRAPHY VALVES.
OTHERS

CONDITIONS

PRESSURE
TEST PRESSURE
WITH AIR
NOTES
SIGNATURE
DATE 28/05/2001 30/06/2009 26/04/2018 10/04/2019 28/06/2019 53503

Page 2531 of 5886
VALVE MATERIAL
Page 73 of 121

BALL VALVE SPECIFICATION MANUF'S OFFER

TAG NO. : 54301 PIPING CLASS : A11A, A1A, A93A, A9A, STANDARD:
RATING : 150 STANDARD : BS EN ISO 17292 MFGRS CAT/FIG:
BODY FORGD/CAST ASTM A 105 / A 216GR.WCB
STEM ANTI BLOWOUT 13% CR.STEEL/SS316; (NO CASTING)
BALL SOLID 13% CR.STEEL/SS304/SS316
BODY SEAT RPTFE WITH SECONDARY METAL TO METAL
GLAND BOLTED/ RETAINED ASTM A105/13% CR STEEL/SS 316/SS 304

BY NUT & WASHER
STEM SEAL RENEWABLE WITH GRAFOIL/PTFE V-RINGS+GRAFOIL
VALVE OPEN ON
STREAM
BODY SEAL GRAFOIL/PTFE
BODY STUD ASTM A193 GR.B7
BODY NUT ASTM A194 GR 2H
OTHERS

RADIOGRAPHY VALVES.
CONDITIONS

PRESSURE
WITH AIR
NOTES
SIGNATURE
4 VALVES CAN ALSO BE SUPPLIED IN ACCORDANCE WITH API-6D. FOR API 6D VALVES,MIN BODY WALL &
THICKNESS SHALL BE PER ASME B16.34. SEAL
5 ALL VALVES SHALL BE FIRE SAFE DESIGN.FIRE SAFE TEST SHALL BE AS PER API 607 VI EDITION /(API 607/ ISO OF MANUFACTURER
10497) /API RP 6FA.
6 TESTING SHALL BE AS PER BS EN 12266-1/API 6D.
7 FOR TRUNNION MOUNTED BALL,BODY SEAT SHALL BE SPRING LOADED.
8 ALL VALVES SHALL BE BIDIRECTIONAL.
9 5 % VALVE CASTINGS SHALL UNDERGO RADIOGRAPHIC EXAMINATION.
DATE 14/12/2000 16/10/2001 24/10/2001 30/06/2009 26/04/2018 54301

Page 2532 of 5886
VALVE MATERIAL
Page 74 of 121

NOTES
10 BIDDER'S STAMPING ON THE VALVE SPECIFICATION SHEET SHALL BE CONSTRUED TO MEAN BIDDER'S
ACCEPTANCE OF SUITABILITY OF VALVE AND VALVE SHEETS FOR SERVICE AND 'SPECIAL SERVICE
CONDITIONS' MENTIONED IN THE VALVE SPECIFICATION SHEETS.
11 STEM SEAL/BODY SEAL MATERIALS SHALL BE PROVIDED WITH CORROSION INHIBITOR.
DATE 14/12/2000 16/10/2001 24/10/2001 30/06/2009 26/04/2018 54301

Page 2533 of 5886
VALVE MATERIAL
Page 75 of 121


TAG NO. : 54302 PIPING CLASS : A2A, STANDARD:
BODY SEAT PEEK WITH SECONDARY METAL TO METAL

BY NUT & WASHER
STEM SEAL RENEWABLE WITH GRAFOIL
VALVE OPEN ON
STREAM
BODY SEAL GRAFOIL
OTHERS

RADIOGRAPHY VALVES.
SPECIAL SERVICE I.B.R. STEAM/CONDENSATE/BOILER FEED
CONDITIONS WATER;MAX TEMP 260 DEG C.

PRESSURE
WITH AIR
NOTES
SIGNATURE
5 VALVES TO COMPLY WITH DESIGN REQUIREMENTS OF IBR ALSO. OF MANUFACTURER
6 TESTING SHALL BE AS PER BS EN 12266-1/API 6D & IBR.
9 ALL VALVES TO BE SUPPLIED WITH IBR CERTIFICATE IN FORM-III C.
10 ALL VALVES SHALL BE PAINTED RED ON BODY-BONNET JOINT.
SHEET REV. NO. 0 1 2
DATE 24/10/2001 30/06/2009 26/04/2018 54302

Page 2534 of 5886
VALVE MATERIAL
Page 76 of 121

NOTES
DATE 24/10/2001 30/06/2009 26/04/2018 54302

Page 2535 of 5886
VALVE MATERIAL
Page 77 of 121


BODY CAST/FORGED ASTM A352 GR.LCB / ASTM A350 GR.LF2 CL.1
STEM ANTI BLOWOUT SS304/SS316; (NO CASTING)
BALL SOLID SS304/SS316
GLAND BOLTED/ RETAINED SS 316/SS 304

BY NUT & WASHER
STEM SEAL RENEWABLE WITH GRAFOIL/PTFE V-RINGS + GRAFOIL
VALVE OPEN ON
STREAM
BODY STUD ASTM A320 GR.L7
BODY NUT ASTM A194 GR 4/ GR.7
OTHERS

RADIOGRAPHY VALVES.
SPECIAL SERVICE LT MIN TEMP -45 DEG C.
CONDITIONS
SPRING INCONEL X750

PRESSURE
WITH AIR
NOTES
SIGNATURE
6 VALVE SHALL BE PROVIDED WITH EXTENDED BONNETS FOR NON COLD BOX OPERATION AS PER BS6364.
7 ALL VALVES SHALL BE FIRE SAFE DESIGN.FIRE SAFE TEST SHALL BE AS PER API 607 VI EDITION /(API 607/ ISO
10497) /API RP 6FA.
8 TESTING SHALL BE AS PER BS 6364 & BS EN 12266-1/API 6D.
10 FLOW DIRECTION SHALL BE CLEARLY INDICATED ON ALL VALVES.
DATE 24/10/2001 30/06/2009 26/04/2018 10/04/2019 28/06/2019 54303

Page 2536 of 5886
VALVE MATERIAL
Page 78 of 121

NOTES
11 PRESSURE RELIEVING DEVICE FOR BODY AND BONNET CAVITY SHALL BE PROVIDED IN THE FORM OF A
HOLE IN BALL FOR RELIEVING CAVITY PRESSURE IN THE UPSTREAM SIDE.
DATE 24/10/2001 30/06/2009 26/04/2018 10/04/2019 28/06/2019 54303

Page 2537 of 5886
VALVE MATERIAL
Page 79 of 121


STEM ANTI BLOWOUT SS 316; (NO CASTING)
BALL SOLID SS 316
GLAND BOLTED/ RETAINED ASTM A105/13% CR STEEL/SS 316

BY NUT & WASHER
STEM SEAL RENEWABLE WITH GRAFOIL/PTFE V-RINGS+GRAFOIL
VALVE OPEN ON
STREAM
OTHERS

RADIOGRAPHY VALVES.
SPECIAL SERVICE AMINE; MAX TEMP 204 DEG.C
CONDITIONS
SPRING INCONEL X750

PRESSURE
WITH AIR
NOTES
SIGNATURE
10497) /API RP 6FA.
DATE 16/10/2001 24/10/2001 30/06/2009 26/04/2018 15/05/2019 54313

Page 2538 of 5886
VALVE MATERIAL
Page 80 of 121

NOTES
DATE 16/10/2001 24/10/2001 30/06/2009 26/04/2018 15/05/2019 54313

Page 2539 of 5886
VALVE MATERIAL
Page 81 of 121



BY NUT & WASHER
STEM SEAL RENEWABLE WITH GRAFOIL/PTFE
VALVE OPEN ON
STREAM
OTHERS

SPECIAL SERVICE MAX. TEMP 186 DEG.C.
CONDITIONS
SPRING INCONEL X750

PRESSURE
WITH AIR
NOTES
SIGNATURE
5 TESTING SHALL BE AS PER BS EN 12266-1/API 6D. OF MANUFACTURER
DATE 14/12/2000 24/10/2001 30/06/2009 26/04/2018 54321

Page 2540 of 5886
VALVE MATERIAL
Page 82 of 121


BODY SEAT PEEK WITH SECONDARY METAL TO METAL

BY NUT & WASHER
VALVE OPEN ON
STREAM
BODY SEAL GRAFOIL
OTHERS

RADIOGRAPHY VALVES.
SPECIAL SERVICE STEAM TRACING; MAX TEMP 260 DEG C.
CONDITIONS
PRESSURE
WITH AIR
NOTES
SIGNATURE
5 TESTING SHALL BE AS PER BS EN 12266-1/API 6D. OF MANUFACTURER
DATE 24/10/2001 30/06/2009 26/04/2018 54322

Page 2541 of 5886
VALVE MATERIAL
Page 83 of 121


TAG NO. : 54345 PIPING CLASS : A1K, STANDARD:
BODY CAST / FORGED ASTM A 351 GR.CF8 / ASTM A 182 GR.F304
BALL SOLID SS 316
GLAND BOLTED/ RETAINED SS 316

BY NUT & WASHER
STEM SEAL RENEWABLE WITH GRAFOIL/ PTFE V-RINGS + GRAFOIL
VALVE OPEN ON
STREAM
BODY STUD ASTM A 193 GR.B7
BODY NUT ASTM A 194 GR.2H
OTHERS

GEAR VALVES.
RADIOGRAPHY
SPECIAL SERVICE MAX. TEMP 204 DEG. C.
CONDITIONS
SPRING INCONEL X - 750

PRESSURE
WITH AIR
NOTES
SIGNATURE
4 VALVES CAN ALSO BE SUPPLIED IN ACCORDANCE WITH API-6D. FOR API-6D VALVES, MIN BODY WALL &
THICKNESS SHALL BE AS PER ASME B16.34. SEAL
10497) /API RP 6FA.
7 FOR TRUNNION MOUNTED BALL, BODY SEAT SHALL BE SPRING LOADED.
DATE 16/10/2001 24/10/2001 30/06/2009 26/04/2018 15/05/2019 54345

Page 2542 of 5886
VALVE MATERIAL
Page 84 of 121

NOTES
DATE 16/10/2001 24/10/2001 30/06/2009 26/04/2018 15/05/2019 54345

Page 2543 of 5886
VALVE MATERIAL
Page 85 of 121


BALL SOLID SS 316
BODY SEAT PCTFE WITH SECONDARY METAL TO METAL
GLAND BOLTED/ RETAINED SS 316

BY NUT & WASHER
VALVE OPEN ON
STREAM
BODY SEAL GRAFOIL
BODY STUD ASTM A 320 GR.B8 CL.2 (IMPACT TESTED)
BODY NUT ASTM A 194 GR.8 (IMPACT TESTED)
OTHERS
THIS SHEET IS PRESENTLY UNDER HOLD

RADIOGRAPHY VALVES.
SPECIAL SERVICE CRYO MIN. TEMP -196 DEG. C.
CONDITIONS
SPRING INCONEL X - 750

PRESSURE
WITH AIR
NOTES
SIGNATURE
6 VALVE SHALL BE PROVIDED WITH EXTENDED BONNET/ GLAND AS PER BS 6364 (NON COLD BOX
APPLICATIONS).
10497) /API RP 6FA.
SHEET REV. NO. 0
DATE 28/06/2019 54346

Page 2544 of 5886
VALVE MATERIAL
Page 86 of 121

NOTES
12 VENDOR SHALL CERTIFY SUITABILITY OF THE VALVE FOR INTENDED SERVICE CONDITIONS.
13 BIDDER TO FURNISH SOFT SEAT DETAILS AND TYPE, GRADE & CLASS SELECTED WITH MANUFACTURER'S
RECOMMENDATIONS LIKE PRESSURE-TEMPERATURE RATING CURVE/TABLE.
14 REFER TECHNICAL NOTES FOR VALVES FOR IMPACT TESTING REQUIREMENTS.
16 WELD REPAIRS, IF ANY, SHALL BE CARRIED OUT PRIOR TO SOLUTION HEAT TREATMENT.
SHEET REV. NO. 0
DATE 28/06/2019 54346

Page 2545 of 5886
VALVE MATERIAL
Page 87 of 121

Location : PACHPADRA Tag No: 543AC Sheet No. 1 of 2

TAG NO. : 543AC PIPING CLASS : A42A, STANDARD:
BODY CAST/FORGED ASTM A352 GR.LCB / ASTM A350 GR.LF2 CL.1

BY NUT & WASHER
VALVE OPEN ON
STREAM
BODY NUT ASTM A194 GR 4/ GR.7
OTHERS FULL BORE

RADIOGRAPHY VALVES.
CONDITIONS
SPRING INCONEL X750

PRESSURE
WITH AIR
NOTES
SIGNATURE
6 VALVE SHALL BE PROVIDED WITH EXTENDED BONNETS FOR NON COLD BOX OPERATION AS PER BS6364.
10497) /API RP 6FA.
SHEET REV. NO. 0
DATE 25/03/2019 543AC

Page 2546 of 5886
VALVE MATERIAL
Page 88 of 121

NOTES
SHEET REV. NO. 0
DATE 25/03/2019 543AC

Page 2547 of 5886
VALVE MATERIAL
Page 89 of 121



BY NUT & WASHER
VALVE OPEN ON
STREAM
OTHERS

RADIOGRAPHY VALVES.
CONDITIONS

PRESSURE
WITH AIR
NOTES
SIGNATURE
10497) /API RP 6FA.
DATE 14/12/2000 16/10/2001 24/10/2001 30/06/2009 26/04/2018 54401

Page 2548 of 5886
VALVE MATERIAL
Page 90 of 121

NOTES
DATE 14/12/2000 16/10/2001 24/10/2001 30/06/2009 26/04/2018 54401

Page 2549 of 5886
VALVE MATERIAL
Page 91 of 121


BALL SOLID SS316
GLAND BOLTED/ RETAINED ASTM A105/13% CR STEEL/SS 316

BY NUT & WASHER
VALVE OPEN ON
STREAM
OTHERS

RADIOGRAPHY VALVES.
SPECIAL SERVICE AMINE; MAX TEMP. 204 DEG.C
CONDITIONS

PRESSURE
WITH AIR
NOTES
SIGNATURE
10497) /API RP 6FA.
9 10% VALVES IN EACH SIZE SHALL UNDERGO HYDROSTATIC TEST OF SEAT. SOFT SEAT SHALL BE REPLACED
AFTER HYDROSTATIC TEST. AFTER THIS ALL VALVES (INCLUDING BALANCE 90%) SHALL BE AIR TESTED.
DATE 16/10/2001 24/10/2001 30/06/2009 26/04/2018 15/05/2019 54413

Page 2550 of 5886
VALVE MATERIAL
Page 92 of 121

NOTES
DATE 16/10/2001 24/10/2001 30/06/2009 26/04/2018 15/05/2019 54413

Page 2551 of 5886
VALVE MATERIAL
Page 93 of 121


BALL SOLID SS 316
BODY SEAT PCTFE WITH SECONDARY METAL TO METAL
GLAND BOLTED/ RETAINED SS 304 / SS 316

BY NUT & WASHER
VALVE OPEN ON
STREAM
BODY SEAL GRAFOIL
BODY STUD ASTM A 320 GR..B8 CL2 (IMPACT TESTED)
BODY NUT ASTM A 194 GR.8 (IMPACT TESTED)
OTHERS
THIS VALVE SHEET IS PRESENTLY UNDER

HOLD.
GEAR VALVES.
RADIOGRAPHY
SPECIAL SERVICE CRYO MIN. TEMP -196 DEG. C.
CONDITIONS

PRESSURE
WITH AIR
NOTES
SIGNATURE
6 VALVE SHALL BE PROVIDED WITH EXTENDED BONNET/ GLAND AS PER BS 6364 (NON COLD BOX
APPLICATIONS).
10497) /API RP 6FA.
SHEET REV. NO. 0
DATE 28/06/2019 54446

Page 2552 of 5886
VALVE MATERIAL
Page 94 of 121

NOTES
9 FLOW DIRECTION SHALL BE CLEARLY MARKED ON ALL VALVES.
10 PRESSURE RELIEVING DEVICE FOR BODY AND BONNET CAVITY IN THE FORM OF A HOLE IN BALL SHALL BE
PROVIDED FOR RELIEVING CAVITY PRESSURE IN THE UPSTREAM SIDE.
11 10% VALVES SHALL UNDERGO HYDROSTATIC TEST OF SEAT . SOFT SEAT SHALL BE REPLACED AFTER
HYDROSTATIC TEST. AFTER THIS ALL VALVES (INCLUDING BALANCE 90%) SHALL BE AIR TESTED.
13 BIDDER SHALL CERTIFY SUITABILITY OF THE VALVES FOR INTENDED SERVICE CONDITIONS.
14 BIDDER TO FURNISH SOFT SEAT DETAILS AND TYPE, GRADE & CLASS SELECTED WITH MANUFACTURER'S
RECOMMENDATIONS LIKE PRESSURE-TEMPERATURE RATING CURVE/TABLE.
15 REFER TECHNICAL NOTES FOR VALVES FOR IMPACT TESTING REQUIREMENTS.
17 WELD REPAIRS, IF ANY, SHALL BE CARRIED OUT PRIOR TO SOLUTION HEAT TREATMENT.
SHEET REV. NO. 0
DATE 28/06/2019 54446

Page 2553 of 5886
VALVE MATERIAL
Page 95 of 121

Location : PACHPADRA Tag No: 544AC Sheet No. 1 of 2

TAG NO. : 544AC PIPING CLASS : B42A, STANDARD:
BODY CAST / FORGED ASTM A352 GR.LCB / ASTM A350 GR.LF2 CL. 1

BY NUT & WASHER
VALVE OPEN ON
STREAM
BODY NUT ASTM A194 GR 4/ GR 7
OTHERS FULL BORE

RADIOGRAPHY VALVES.
CONDITIONS

PRESSURE
WITH AIR
NOTES
SIGNATURE
6 VALVES SHALL BE PROVIDED WITH EXTENDED BONNETS FOR NON COLD BOX OPERATION AS PER BS6364.
10497) /API RP 6FA.
SHEET REV. NO. 0
DATE 25/03/2019 544AC

Page 2554 of 5886
VALVE MATERIAL
Page 96 of 121

NOTES
SHEET REV. NO. 0
DATE 25/03/2019 544AC

Page 2555 of 5886
VALVE MATERIAL
Page 97 of 121


TAG NO. : 54501 PIPING CLASS : D1A, STANDARD:

BY NUT & WASHER
VALVE OPEN ON
STREAM
OTHERS

RADIOGRAPHY VALVES.
CONDITIONS

PRESSURE
WITH AIR
NOTES
SIGNATURE
10497) /API RP 6FA.
9 10% VALVES IN EACH SIZE SHALL UNDERGO HYDROSTATIC TEST OF SEAT. SOFT SEAT SHALL BE REPLACED
AFTER HYDROSTATIC TEST. AFTER THIS ALL VALVES (INCLUDING BALANCE 90%) SHALL BE AIR TESTED.
DATE 24/10/2001 30/06/2009 26/04/2018 54501

Page 2556 of 5886
VALVE MATERIAL
Page 98 of 121

NOTES
DATE 24/10/2001 30/06/2009 26/04/2018 54501

Page 2557 of 5886
VALVE MATERIAL
Page 99 of 121


TAG NO. : 54503 PIPING CLASS : D4A, STANDARD:
BODY CAST / FORGED ASTM A352 GR.LCB / ASTM A350 GR.LF2 CL. 1

BY NUT & WASHER
VALVE OPEN ON
STREAM
BODY NUT ASTM A194 GR 4/ GR 7
OTHERS

RADIOGRAPHY VALVES.
CONDITIONS

PRESSURE
WITH AIR
NOTES
SIGNATURE
6 VALVES SHALL BE PROVIDED WITH EXTENDED BONNETS FOR NON COLD BOX OPERATION AS PER BS6364.
10497) /API RP 6FA.
DATE 14/12/2001 30/06/2009 26/04/2018 10/04/2019 28/06/2019 54503

Page 2558 of 5886
VALVE MATERIAL
Page 100 of 121

NOTES
DATE 14/12/2001 30/06/2009 26/04/2018 10/04/2019 28/06/2019 54503

Page 2559 of 5886
VALVE MATERIAL
Page 101 of 121

PLUG VALVE SPECIFICATION MANUF'S OFFER

TAG NO. : 55301 PIPING CLASS : A11A, A13A, A1A, A6A, A9A, STANDARD:
BODY FORGED/CAST ASTM A 105 / A 216GR.WCB
COVER BOLTED ASTM A 105/ASTM A 216 GR.WCB
PLUG & STEM TAPER ASTM A 105/A 216GR.WCB, HARDENED / SS304
GLAND BOLTED ASTM A 105/A216 WCB
STEM SEAL/GLAND RENEWABLE GRAFOIL RINGS

PACKING
LUBRICANT SCREW WITH CHECK SS 410/ASTM A105
VALVES
COVER BOLTS ASTM A 193 GR. B7
COVER NUTS ASTM A 194 GR. 2H
OTHERS LUBRICATED TYPE

RADIOGRAPHY VALVES.
SPECIAL SERVICE HYDROCARBON, MAX. TEMP 250 DEG. C.
CONDITIONS

PRESSURE
WITH AIR
NOTES
SIGNATURE
4 PLUG VALVES IN ACCORDANCE WITH API-599 / API-6D ARE ALSO ACCEPTABLE. &
5 FOR API 6D STD VALVE MIN. BODY WALL THICKNESS SHALL BE AS PER API 599/BS 5353. SEAL
6 TESTING SHALL BE AS PER BS EN 12266-1/API 598/API 6D AS CALLED OUT IN RESPECTIVE DESIGN OF MANUFACTURER
STANDARDS.
7 FOR WRENCH OPERATED VALVES, SEPARATE WRENCH REQUIRED FOR EACH VALVE.
8 VALVE POSITION INDICATOR SHALL BE PROVIDED.
9 VALVES SHALL BE FIRE-SAFE DESIGN AS PER API 607 VI EDITION /(API 607/ ISO 10497)/ API-6FA.
10 VENDOR SHALL CONFIRM SUITABILITY OF LUBRICANT WITH RESPECT TO SERVICE AND SERVICE
CONDITIONS SPECIFIED.
11 BIDDER TO SUPPLY LUBRICANT FOR TWO YEARS OF NORMAL OPERATION.
12 5% VALVE CASTINGS SHALL UNDERGO RADIOGRAPIC EXAMINATION.
13 UNLESS OTHERWISE SPECIFIED IN MR, VALVES SHALL BE SHORT PATTERN TYPE UPTO 12" AND VENTURI
TYPE ABOVE 12" SIZE.
14 GLAND PACKING MATERIAL SHALL BE PROVIDED WITH CORROSION INHIBITOR.
DATE 14/12/2001 20/02/2002 01/03/2005 30/06/2009 26/04/2018 55301

Page 2560 of 5886
VALVE MATERIAL
Page 102 of 121


BODY FORGED/CAST ASTM A 105/ASTM A 216 GR.WCB
PLUG & STEM TAPER ASTM A 105 / A 216GR.WCB , HARDENED OR

CHROME PLATED / SS316
SLEEVE NON-LUBRICATED PTFE
STEM SEAL DIAPHRAGM TYPE PTFE DIAPHRAGM WITH SS316 BACKUP

(REVERSIBLE LIP DIAPHRAGM; RPTFE WEDGE RING & SS304
DESIGN) THRUST COLLAR
ADJUSTING SCREW ASTM A 193 GR. B7
OTHERS

RADIOGRAPHY VALVES.
SPECIAL SERVICE CAUSTIC SERVICE; MAX. TEMP 110 DEG. C.
CONDITIONS

PRESSURE
WITH AIR
NOTES
SIGNATURE
5 FOR API 6D STD VALVES, MIN. BODY WALL THICKNESS SHALL BE AS PER API 599/BS 5353. SEAL
STANDARDS.
9 VALVE SHALL BE PROVIDED WITH ANTI-STATIC DEVICE.
SHEET REV. NO. 4 5 6 7 8 9
DATE 14/12/2001 17/09/2003 01/03/2005 30/06/2009 26/04/2018 15/05/2019 55313

Page 2561 of 5886
VALVE MATERIAL
Page 103 of 121


TAG NO. : 55345 PIPING CLASS : A1K, STANDARD:
BODY FORGED/CAST ASTM A 182 GR.F304 / ASTM A 351 GR.CF8
COVER BOLTED ASTM A 182 GR.F304 / ASTM A 351 GR.CF8
PLUG & STEM TAPER SS 316
GLAND SS 316
STEM SEAL / GLAND RENEWABLE GRAFOIL RINGS

PACKING
LUBRICANT SCREW WITH CHECK SS316
VALVES
COVER BOLTS ASTM A 193 GR.B7
COVER NUTS ASTM A 194 GR.2H
COVER GASKET SP.WND SS316-GRAFOIL FILLER

GEAR OPERATOR VALVES
GEAR VALVES
RADIOGRAPHY
SPECIAL SERVICE HYDROCARBONS; MAX TEMP 250 DEG. C.
CONDITIONS

PRESSURE
WITH AIR
NOTES
SIGNATURE
5 FOR API 6D STD. VALVES, MIN. BODY WALL THICKNESS SHALL BE AS PER API 599/ BS 5353. SEAL
STANDARDS.
DATE 17/09/2003 01/03/2005 30/06/2009 26/04/2018 15/05/2019 55345

Page 2562 of 5886
VALVE MATERIAL
Page 104 of 121

NOTES
DATE 17/09/2003 01/03/2005 30/06/2009 26/04/2018 15/05/2019 55345

Page 2563 of 5886
VALVE MATERIAL
Page 105 of 121


TAG NO. : 55401 PIPING CLASS : B13A, B1A, B6A, B9A, STANDARD:
BODY FORGED/CAST ASTM A 105 / A 216GR.WCB
PLUG & STEM TAPER ASTM A 105 / A 216GR.WCB, HARDENED / SS304
GLAND BOLTED ASTM A 105/A216 WCB
STEM SEAL / GLAND RENEWABLE GRAFOIL RINGS

PACKING
LUBRICANT SCREW WITH CHECK SS 410/ASTM A105
VALVES

RADIOGRAPHY VALVES.
SPECIAL SERVICE HYDROCARBON, MAX. TEMP 250 DEG. C.
CONDITIONS

PRESSURE
WITH AIR
NOTES
SIGNATURE
5 FOR API 6D STD VALVE MIN. BODY WALL THICKNESS SHALL BE AS PER API 599/BS 5353. SEAL
STANDARDS.
DATE 14/12/2001 17/09/2003 01/03/2005 30/06/2009 26/04/2018 55401

Page 2564 of 5886
VALVE MATERIAL
Page 106 of 121

NOTES
RADIOGRAPIC EXAMINATION.
13 UNLESS OTHERWISE SPECIFIED IN MR, VALVES SHALL BE SHORT PATTERN UPTO 4" AND VENTURI TYPE
ABOVE 4" SIZE.
DATE 14/12/2001 17/09/2003 01/03/2005 30/06/2009 26/04/2018 55401

Page 2565 of 5886
VALVE MATERIAL
Page 107 of 121


BODY FORGED/CAST ASTM A 105/ASTM A 216 GR.WCB
PLUG & STEM TAPER ASTM A 105 / A 216GR.WCB , HARDENED OR

CHROME PLATED / SS316
SLEEVE NON-LUBRICATED PTFE
STEM SEAL DIAPHRAGM TYPE PTFE DIAPHRAGM WITH SS304 BACKUP

(REVERSIBLE LIP DIAPHRAGM; RPTFE WEDGE RING & SS304
DESIGN) THRUST COLLAR
ADJUSTING SCREW ASTM A 193 GR. B7
OTHERS

RADIOGRAPHY VALVES.
SPECIAL SERVICE CAUSTIC SERVICE; MAX. TEMP 110 DEG. C.
CONDITIONS

PRESSURE
WITH AIR
NOTES
SIGNATURE
5 FOR API 6D STD VALVES, MIN. BODY WALL THICKNESS SHALL BE AS PER API 599/BS 5353. SEAL
STANDARDS.
9 VALVE SHALL BE PROVIDED WITH ANTI-STATIC DEVICE.
TYPE ABOVE 4" SIZE.
SHEET REV. NO. 4 5 6 7 8 9
DATE 14/12/2001 17/09/2003 01/03/2005 30/06/2009 26/04/2018 15/05/2019 55413

Page 2566 of 5886
VALVE MATERIAL
Page 108 of 121

BUTTERFLY VALVE SPECIFICATION MANUF'S OFFER

RATING : 150 STANDARD :BS EN 593 MFGRS CAT/FIG:
SIZE RANGE : 3.0" TO 24.0" ENDS : WAFL TO B-16.5 WAF/125AARH RATING: ENDS:
DISC CAST, TRIPLE ASTM A 352 GR.LCB/ASTM A 351 GR.CF8M/ A

OFFSET 351 GR.CF8
SHAFT ANTI STATIC. 17-4PH/A 479 XM19/SS316/SS304(NO CASTING)
DISK SEAL RPTFE
SHAFT BUSHING PTFE/SS316
BODY SCREWS/PIN SS304/SS316
BODY SEATS STELLITED/RPTFE(IN-BUILT)
SHAFT SEAL PTFE+GRAFOIL/GRAFOIL
CLAMPING RINGS(IF ASTM A 516 GR.70/SS316/SS304

REQD.)
GASKET SP.WND SS316+GRAFOIL FILLER

RADIOGRAPHY VALVES.
SPECIAL SERVICE LT MIN TEMP (-)48 DEG.C.
CONDITIONS
THRUST BEARING SS316

PRESSURE
WITH AIR
NOTES
SIGNATURE
4 VALVE CAN ALSO BE SUPPLIED IN ACCORDANCE WITH API 609, CATEGORY-B. &
5 VALVES TO COMPLY WITH DESIGN REQUIREMENTS OF BS-6364 ALSO. SEAL
6 VALVES SHALL BE PROVIDED WITH EXTENDED BONNET AS PER BS 6364. OF MANUFACTURER
7 VALVE TESTING SHALL BE AS PER BS 6364 AND BS EN 12266-1/API 598.
8 VALVES SHALL BE HIGH PERFORMANCE TYPE, TIGHT SHUT-OFF AND BI-DIRECTIONAL.
9 VALVES SHALL BE LUGGED WAFER TYPE(WAFL) AND VALVE ENDS TO SUIT B16.5 RF/125AARH
10 FACE-TO FACE DIMENSIONS SHALL BE AS PER BS EN 558-2 (BASIC SERIES 20) FOR BS EN 593 VALVES AND AS
PER CATEGORY-B VALVES FOR API 609 VALVES.
11 VALVES SHALL BE SUITABLE FOR BOTH 'ON-OFF' AS WELL AS 'THROTTLING SERVICE' UNDER MAXIMUM
DIFFERENTIAL PRESSURE FOR THE RATING.
12 DISC STRENGTH TEST SHALL BE CONDUCTED AS PER CODE.
SHEET REV. NO. 0
DATE 10/04/2019 56303

Page 2567 of 5886
VALVE MATERIAL
Page 109 of 121

NOTES
14 BOLTINGS FOR TAPPED HOLES IN BODY, IF ANY, SHALL BE SUPPLIED BY VENDOR IN MATERIAL ASTM A 320
GR.L7/A 194 GR.4 OR GR.7
15 VALVES SHALL BE PROVIDED WITH POSITION INDICATOR AND LOCKING DEVICE AT ANY POSITION.
16 CROSS-SECTIONAL DETAIL OF BODY SEAT/SEAL ARRANGEMENT SHALL BE SUBMITTED ALONG WITH THE
OFFER.
17 VENDOR SHALL SUBMIT VALVE DRAWING FOR APPROVAL.
18 VALVE SHALL BE CERTIFIED SUITABLE FOR THE SERVICE AND SERVICE CONDITIONS SPECIFIED IN THE
DATA SHEET FOR BUTTERFLY VALVES (FORMAT NO. 3-1643-0092).
19 DISK SEALS SHALL BE PROVIDED FOR VALVES WITH METALLIC SEATS ONLY.
20 ALL VALVES SHALL BE FIRE SAFE DESIGN.FIRE SAFE TEST SHALL BE AS PER API 607 VI EDITION /(API 607/ISO
10497)/API RP 6FA, AS APPLICABLE.
21 BIDDER TO FURNISH DISK SEAL/SOFT BODY SEAT DETAILS AND TYPE, GRADE & CLASS SELECTED FOR RPTFE
FROM ASTM D4745 WITH MANUFACTURER'S RECOMMENDATIONS LIKE PRESSURE-TEMPERATURE RATING
CURVE/TABLE.
22 SHAFT SEAL MATERIAL(GRAFOIL) SHALL BE PROVIDED WITH CORROSION INHIBITOR.
SHEET REV. NO. 0
DATE 10/04/2019 56303

Page 2568 of 5886
VALVE MATERIAL
Page 110 of 121


SIZE RANGE : 26.0" TO 48.0" ENDS : FLGD TO AWWAC207 FF/125AARH RATING: ENDS:
DISC CAST(NOTE-17) ASTM A 216 GR.WCB
SHAFT ANTI STATIC. 17-4PH/13%CR ST/SS316 (NO CASTING).
DISK SEAL/LINER REPLACEABLE/ NON NITRILE RUBBER/EPDM

REPLACEABLE
SHAFT BUSHING LEADED TIN-BRONZE/ PTFE LINED CS/EPDM
BODY SCREWS/PIN SS 316
BODY SEATS 13% CR STEEL/ SS316
SHAFT SEAL NITRILE RUBBER/ BUNA N/ EPDM/ VITON
CLAMPING RINGS(IF ASTM A 515 GR.70/13% CR.STEEL/SS316

REQD.)

SPECIAL SERVICE COOLING WATER; MAX TEMP 65 DEG.C. MAX.
CONDITIONS PRESS. 10.2 KG/CM2G.
THRUST BEARING SS316/PTFE

PRESSURE
WITH AIR
NOTES
SIGNATURE
4 VALVE CAN ALSO BE SUPPLIED ALSO BE SUPPLIED AS PER API 609, CATEGORY-B. &
5 VALVE TESTING SHALL BE AS PER BS EN 12266-1/ API-598. SEAL
6 VALVES SHALL BE TIGHT SHUT-OFF TYPE AND BIDIRECTIONAL. OF MANUFACTURER
7 VALVE SHALL BE DOUBLE FLANGED TYPE TO AWWA C207 CL.D, FF/125AARH.
8 FACE-TO FACE DIMENSIONS SHALL BE AS PER BS EN 558-2 FOR BS EN 593 VALVES AND AS PER CATEGORY-B
VALVES (SHORT PATTERN) FOR API-609 VALVES.
9 PN10 RATED VALVES AS PER BS EN 593 ARE ALSO ACCEPTABLE.
10 VALVE SHALL BE SUITABLE FOR BOTH "ON-OFF" AS WELL AS "THROTTLING" APPLICATIONS UNDER
MAXIMUM DIFFERENTIAL PRESSURE OF 10.2 KG/CM2G
12 GASKET USED, IF ANY, SHALL BE TO BS 7531 GR.X.
13 BOLTINGS FOR TAPPED HOLES IN BODY, IF ANY, SHALL BE SUPPLIED BY VENDOR IN MATERIAL
ASTM A 193 GR.B7/A 194 GR.2H
SHEET REV. NO. 0
DATE 26/11/2018 56316

Page 2569 of 5886
VALVE MATERIAL
Page 111 of 121

NOTES
15 CROSS-SECTIONAL DETAIL OF BODY SEAT/SEAL ARRANGEMENT AND VALVE DRAWING SHALL BE
SUBMITTED.
16 VALVE AS WHOLE AND LINER/DISK SEAL IN PARTICULAR SHALL BE CERTIFIED SUITABLE FOR THE SERVICE
AND SERVICE CONDITIONS SPECIFIED IN THE DATA SHEET FOR BUTTERFLY VALVES.
17 FOR LINER MATERIAL OF NITRILE RUBBER/EPDM, DISK MATERIAL SHALL BE SS316/13%CR.STEEL/ASTM A216
GR.WCB(WITH SS316 EDGE)
18 SPARK TESTING SHALL BE CARRIED OUT FOR NON REPLACEABLE LINER AS PER IS 4682 PART-I/BS 6374 PART-
5.
20 BODY AND DISK MATERIAL IN DUCTILE IRON AS PER ASTM A 536 GR.65-45-12/60-40-18 OR DIN GGG40 ARE
ALSO ACCEPTABLE.
22 VALVES AS PER BS-5155 SHALL ALSO BE ACCEPTABLE WITH TESTING AS PER BS-6755 PART-I AND FACE TO
FACE DIMENSIONS AS PER BS 5155 (SHORT PATTERN).
SHEET REV. NO. 0
DATE 26/11/2018 56316

Page 2570 of 5886
VALVE MATERIAL
Page 112 of 121


SIZE RANGE : 26.0" TO 36.0" ENDS : FLGD TO B-16.47 B RF/125AARH RATING: ENDS:
DISC CAST, TRIPLE ASTM A 352 GR.LCB/ASTM A 351 GR.CF8M/ A

OFFSET 351 GR.CF8
SHAFT ANTI STATIC. 17-4PH/A 479 XM19/SS316/SS304(NO CASTING)
DISK SEAL SS316/SS316+GRAPHITE
SHAFT BUSHING PTFE/SS316
BODY SEATS STELLITED
SHAFT SEAL PTFE+GRAFOIL/GRAFOIL
CLAMPING RINGS(IF ASTM A 516 GR.70/SS316/SS304

REQD.)

RADIOGRAPHY VALVES.
SPECIAL SERVICE LT MIN TEMP (-)48 DEG.C.
CONDITIONS

PRESSURE
WITH AIR
NOTES
SIGNATURE
4 VALVES TO COMPLY WITH DESIGN REQUIREMENTS OF BS-6364 ALSO. &
5 VALVES SHALL BE PROVIDED WITH EXTENDED BONNET AS PER BS 6364. SEAL
6 VALVE CAN ALSO BE SUPPLIED ALSO BE SUPPLIED AS PER API 609, CATEGORY-B. OF MANUFACTURER
7 VALVE TESTING SHALL BE AS PER BS 6364 AND BS BS EN 12266-1/ API-598.
8 VALVES SHALL BE HIGH PERFORMANCE TYPE, TIGHT SHUT-OFF AND BI-DIRECTIONAL.
9 VALVES SHALL BE DOUBLE FLANGED TYPE TO ASME B16.47B, RF/125AARH.
SHEET REV. NO. 0
DATE 10/04/2019 56317

Page 2571 of 5886
VALVE MATERIAL
Page 113 of 121

NOTES
14 BOLTINGS FOR TAPPED HOLES IN BODY, IF ANY, SHALL BE SUPPLIED BY VENDOR IN MATERIAL ASTM A 320
GR.L7/A 194 GR.4 OR GR.7
16 CROSS-SECTIONAL DETAIL OF BODY SEAT/SEAL ARRANGEMENT SHALL BE SUBMITTED ALONG WITH THE
OFFER.
17 VENDOR SHALL SUBMIT VALVE DRAWING FOR APPROVAL.
18 VALVE SHALL BE CERTIFIED SUITABLE FOR THE SERVICE AND SERVICE CONDITIONS SPECIFIED IN THE
DATA SHEET FOR BUTTERFLY VALVES (FORMAT NO. 3-1643-0092).
19 ALL VALVES SHALL BE FIRE SAFE DESIGN.FIRE SAFE TEST SHALL BE AS PER API 607 VI EDITION /(API 607/ISO
10497)/API RP 6FA, AS APPLICABLE.
SHEET REV. NO. 0
DATE 10/04/2019 56317

Page 2572 of 5886
VALVE MATERIAL
Page 114 of 121


DISC CAST(NOTE-16) ASTM A 216 GR.WCB
SHAFT ANTI STATIC 17-4PH/13%CR ST/SS316 (NO CASTING).
DISK SEAL/LINER REPLACEABLE/ NON NITRILE RUBBER/EPDM

REPLACEABLE
SHAFT BUSHING LEADED TIN-BRONZE/ PTFE LINED CS/EPDM
BODY SCREWS/PIN SS 316
BODY SEATS 13% CR STEEL/ SS316
SHAFT SEAL NITRILE RUBBER/ BUNA N/ EPDM/ VITON
CLAMPING RINGS(IF ASTM A 515 GR.70/13% CR.STEEL/SS316

REQD.)

SPECIAL SERVICE COOLING WATER; MAX TEMP 65 DEG.C. MAX.
CONDITIONS PRESS. 10.2 KG/CM2G.
THRUST BEARING SS316/PTFE

PRESSURE
WITH AIR
NOTES
SIGNATURE
4 VALVE CAN ALSO BE SUPPLIED AS PER API 609, CATEGORY-A. &
5 VALVE TESTING SHALL BE AS PER BS EN 12266-1/API 598. SEAL
6 VALVES SHALL BE TIGHT SHUT-OFF TYPE AND BIDIRECTIONAL. OF MANUFACTURER
7 VALVE SHALL BE LUGGED WAFER TYPE(WAFL) AND VALVE ENDS TO SUIT B16.5 RF/125AARH.
8 FACE-TO-FACE DIMENSIONS SHALL BE AS PER BS EN 558-2 (BASIC SERIES 20) FOR BS EN 593 VALVES AND AS
PER CATEGORY-A VALVES FOR API 609 VALVES.
9 VALVE SHALL BE SUITABLE FOR BOTH "ON-OFF" AS WELL AS "THROTTLING" APPLICATIONS UNDER
MAXIMUM DIFFERENTIAL PRESSURE OF 10.2 KG/CM2G
11 GASKET USED, IF ANY, SHALL BE TO BS 7531 GR. X.
SHEET REV. NO. 0
DATE 26/11/2018 56321

Page 2573 of 5886
VALVE MATERIAL
Page 115 of 121

NOTES
14 CROSS-SECTIONAL DETAIL OF BODY SEAT/SEAL ARRANGEMENT AND VALVE DRAWING SHALL BE
SUBMITTED.
15 VALVE AS WHOLE AND LINER/DISK SEAL IN PARTICULAR SHALL BE CERTIFIED SUITABLE FOR THE SERVICE
AND SERVICE CONDITIONS SPECIFIED IN THE DATA SHEET FOR BUTTERFLY VALVES.
16 FOR LINER MATERIAL OF NITRILE RUBBER/EPDM, DISK MATERIAL SHALL BE SS316/13%CR.STEEL/ASTM A216
GR.WCB(WITH SS316 EDGE)
18 SPARK TESTING SHALL BE CARRIED OUT FOR NON REPLACEABLE LINER AS PER IS 4682 PART-I/BS 6374 PART-
5.
19 BODY AND DISK MATERIAL IN DUCTILE IRON AS PER ASTM A 536 GR.65-45-12/60-40-18 OR DIN GGG40 ARE
ALSO ACCEPTABLE.
21 PN10 RATED VALVES AS PER BS EN 593 ARE ALSO ACCEPTABLE.
22 VALVES AS PER BS-5155 SHALL ALSO BE ACCEPTABLE WITH TESTING AS PER BS-6755 PART-I AND FACE TO
FACE DIMENSIONS AS PER BS 5155 (WAFER SHORT/ WAFER MEDIUM).
SHEET REV. NO. 0
DATE 26/11/2018 56321

Page 2574 of 5886
VALVE MATERIAL
Page 116 of 121


DISC CAST, TRIPLE ASTM A 216 GR.WCB/ASTM A 351 GR.CF8M/A351

OFFSET GR.CF8/13% CR.STEEL
SHAFT ANTI STATIC. 17-4PH/A 479 XM19/13% CR.STEEL/
SS316/SS304(NO CASTING)
SHAFT BUSHING SS316
BODY SEATS 13% CR.STEEL/SS304/SS316/STELLITED
SHAFT SEAL GRAFOIL
CLAMPING RINGS(IF ASTM A 515 GR.70/SS316/SS304/13% CR.STEEL

REQD.)

RADIOGRAPHY VALVES.
CONDITIONS
OTHERS

PRESSURE
WITH AIR
NOTES
SIGNATURE
4 VALVE CAN ALSO BE SUPPLIED IN ACCORDANCE WITH API 609, CATEGORY-B. &
5 VALVE TESTING SHALL BE AS PER BS EN 12266-1/API 598. SEAL
6 VALVES SHALL BE HIGH PERFORMANCE TYPE AND TIGHT SHUT-OFF. OF MANUFACTURER
7 VALVE SHALL BE LUGGED WAFER TYPE(WAFL) AND VALVE ENDS TO SUIT B16.5 RF/125AARH.
8 FACE-TO-FACE DIMENSIONS SHALL BE AS PER BS EN 558-2 (SERIES 20) FOR BS EN 593 VALVES AND AS PER
CATEGORY-B VALVES FOR API 609 VALVES.
SHEET REV. NO. 0
DATE 10/12/2018 56390

Page 2575 of 5886
VALVE MATERIAL
Page 117 of 121

NOTES
14 VALVE SHALL BE CERTIFIED SUITABLE FOR THE SERVICE AND SERVICE CONDITIONS SPECIFIED.
15 BUTTERFLY VALVES WITH SEAL RINGS BUILT INSIDE THE BODY ARE ALSO ACCEPTABLE. IN SUCH CASE THE
SEAL RING MATERIAL SHALL BE SS316+GRAPHITE AND THE DISC EDGE COMING IN CONTACT WITH THE SEAL
RING SHALL BE STELLITED.
16 ALL VALVES SHALL BE FIRE SAFE DESIGN.FIRE SAFE TEST SHALL BE AS PER API 607/ BS EN ISO 10497 /API RP
6FA, AS APPLICABLE.
SHEET REV. NO. 0
DATE 10/12/2018 56390

Page 2576 of 5886
VALVE MATERIAL
Page 118 of 121


SIZE RANGE : 26.0" TO 60.0" ENDS : FLGD TO B-16.47 B RF/125AARH RATING: ENDS:
DISC CAST, TRIPLE ASTM A 216 GR.WCB/ASTM A 351 GR.CF8M/ A

OFFSET 351 GR.CF8/13% CR.STEEL
SHAFT ANTI STATIC. 17-4PH/13% CR.STEEL/A 479
XM19/SS316/SS304(NO CASTING)
SHAFT BUSHING SS316
BODY SEATS 13% CR.STEEL/SS304/SS316/STELLITED
SHAFT SEAL GRAFOIL
CLAMPING RINGS(IF ASTM A 515 GR.70/SS316/SS304/13% CR.STEEL

REQD.)
GASKET SP.WND SS316+GRAFIL+ I RING

RADIOGRAPHY VALVES.
CONDITIONS
OTHERS

PRESSURE
WITH AIR
NOTES
SIGNATURE
4 VALVE CAN ALSO BE SUPPLIED AS PER API 609, CATEGORY-B. &
5 VALVE TESTING SHALL BE AS PER BS EN 12266-1/ API 598. SEAL
6 VALVES SHALL BE HIGH PERFORMANCE TYPE AND TIGHT SHUT-OFF. OF MANUFACTURER
7 VALVES SHALL BE DOUBLE FLANGED TYPE TO ASME B16.47B,RF/125AARH.
SHEET REV. NO. 0 1
DATE 07/12/2018 09/10/2019 56391

Page 2577 of 5886
VALVE MATERIAL
Page 119 of 121

NOTES
14 VALVE SHALL BE CERTIFIED SUITABLE FOR THE SERVICE AND SERVICE CONDITIONS SPECIFIED.
15 ALL VALVES SHALL BE FIRE SAFE DESIGN.FIRE SAFE TEST SHALL BE AS PER API 607 / BS EN ISO 10497 / API
RP 6FA, AS APPLICABLE.RTIFIED SUITABLE FOR THE SERVICE AND SERVICE CONDITIONS SPECIFIED.
17 SIZES FOR VALVES, NOT COVERED IN THE DESIGN STANDARD, SHALL BE AS PER MANUFACTURER'S
STANDARD.BUT THE END FLANGES SHALL BE AS PER MR REQUIREMENTS AND BODY SHALL NOT BE LESS
THAN THE END FLANGE SIZE . ALL OTHER REQUIREMENTS SHALL BE AS PER THE DESIGN STANDARD (BS
EN593/API 609, CAT-B, AS APPLICABLE)
SHEET REV. NO. 0 1
DATE 07/12/2018 09/10/2019 56391

Page 2578 of 5886
VALVE MATERIAL
Page 120 of 121

PISTON VALVE SPECIFICATION MANUF'S OFFER

TAG NO. : 64402 PIPING CLASS : A2A, B2A, STANDARD:
RATING : 300 STANDARD : MNF'STD MFGRS CAT/FIG:
STEM RISING ASTM A 276 TP 410
PISTON 13% CR STEEL/17% CR STEEL/SS304/SS316
UPPER AND LOWER RENEWABLE SEE NOTE-5 BELOW

SEALING RINGS
LANTERN ASTM A 276 TP 410
BUSH/SPACER
BELLEVILLE 50 CR V4/ASTM A 240 GR.302
WASHER
HAND WHEEL MALLEABLE IRON/CAST ST/FAB.ST/DUCT. IRON

RADIOGRAPHY VALVES
OTHERS NON-REGULATING
PISTON VALVE
SPECIAL SERVICE I.B.R. STEAM/CONDENSATE; MAX. TEMP. 325
CONDITION DEG.C.(AT 300# CLASS PRESSURE AS PER ASME
B16.5)
PRESSURE
WITH AIR
NOTES
SIGNATURE
4 VENDOR SHALL SPECIFY THE MATERIAL AND CERTIFY THE SUITABILITY OF MATERIAL SELECTED FOR &
SEALING RINGS AND THE PARTS NOT MENTIONED IN THE SPECIFICATION SHEET FOR (a) THE SERVICE AND SEAL
PRESSURE-TEMP. CONDITIONS SPECIFIED (b) HIGH TEMP. EXPERIENCED DURING WELDING OF SOCKET OF MANUFACTURER
WELDED ENDS TO PIPE.
6 ALL VALVES SHALL BE SUPPLIED WITH IBR CERTIFICATE IN FORM-III C.
7 ALL VALVES SHALL BE PAINTED RED ON BODY-BONNET JOINT.
9 FORGED VALVES WITH BODY/BONNET MATERIAL AS PER ASTM A 105 ARE ALSO ACCEPTABLE.
10 PN64 RATING VALVES ARE ALSO ACCEPTABLE.
SHEET REV. NO. 0 1
DATE 31/12/2001 26/04/2018 64402

Page 2579 of 5886
VALVE MATERIAL
Page 121 of 121

PISTON VALVE SPECIFICATION MANUF'S OFFER

TAG NO. : 64422 PIPING CLASS : A32A, B32A, STANDARD:
RATING : 300 STANDARD : MNF'STD MFGRS CAT/FIG:
STEM RISING ASTM A 276 TP 410
PISTON 13% CR STEEL/17% CR STEEL/SS304/SS316
LANTERN ASTM A 276 TP 410

BUSH/SPACER
UPPER AND LOWER RENEWABLE SEE NOTE-5 BELOW
SEALING RINGS
BELLEVILLE 50 CR V4/ASTM A 240 GR.302
WASHER
HAND WHEEL MALLEABLE IRON/CAST ST/FAB.ST/DUCT. IRON

RADIOGRAPHY VALVES
OTHERS NON-REGULATING
PISTON VALVE
SPECIAL SERVICE STEAM/CONDENSATE; MAX. TEMP. 325
CONDITION DEG.C.(AT 300# CLASS PRESSURE AS PER ASME
B16.5)
PRESSURE
WITH AIR
NOTES
SIGNATURE
4 VENDOR SHALL SPECIFY THE MATERIAL AND CERTIFY THE SUITABILITY OF MATERIAL SELECTED FOR &
SEALING RINGS AND THE PARTS NOT MENTIONED IN THE SPECIFICATION SHEET FOR (a) THE SERVICE AND SEAL
PRESSURE-TEMP. CONDITIONS SPECIFIED (b) HIGH TEMP. EXPERIENCED DURING WELDING OF SOCKET OF MANUFACTURER
WELDED ENDS TO PIPE.
6 FORGED VALVES WITH BODY/BONNET MATERIAL AS PER ASTM A 105 ARE ALSO ACCEPTABLE.
7 PN64 RATING VALVES ARE ALSO ACCEPTABLE.
SHEET REV. NO. 0 1
DATE 31/12/2001 26/04/2018 64422

Page 2580 of 5886

VMS 1

Uploaded by

Copyright:

Available Formats

VMS 1

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

VMS 1

Uploaded by

Copyright:

Available Formats

JOB SPECIFICATION NO.

VALVE MATERIAL SPECIFICATION

Project : RAJASTHAN REFINERY

Job No. : B224

B 18/10/2019 REVISED AND REISSUED FOR TENDER MKS PPSW MK

A 21/06/2019 ISSUED FOR TENDER MKS PPSW MK

Template No. 5-0000-0001-T1 Rev. 1 Copyright EIL-All rights reserved

Template No. 5-0000-0001-T2 Rev. 1 Copyright EIL-All rights reserved

Sl. No. Description Pages

1 Valve Material Specifications (B224-6-44-0006-6002) Rev. B 121

Template No. 5-0000-0001-T2 Rev. 1 Copyright EIL-All rights reserved

Client : HRRL Dept./Sect. : 16/43

INDEX OF VALVE TAG NOS.

Notes: 1. For VMS General Notes, refer Annexure-I of this document.

2. For VMS Extracts, refer Annexure-II of this document.

Template No. 5-0000-0001-T2 Rev. 1 Copyright EIL-All rights reserved

Client : HRRL Dept./Sect. : 16/43

GATE VALVE SPECIFICATION MANUF'S OFFER

DESCRIPTION CONSTRUCTION MATERIAL CONSTRUCTION MATERIAL

BONNET BOLTED ASTM A 105

STEM RISING 13% CR.STEEL (NO CASTING)

WEDGE DISC SOLID STELLITED

BODY SEAT RING RENEWABLE STELLITED

STEM PACKING RENEWABLE WITH CORROSION INHIBITED DIE FORMED FLEXIBLE

BONNET BOLTS ASTM A193 GR B7

BONNET NUTS ASTM A194 GR 2H

BONNET GASKET SP.WND SS316- GRAFOIL FILLER

SPECIAL SERVICE MAX TEMP. 427 DEG. C.

HYDROSTATIC TEST BODY : 2975 PSIG. SEAT : 2175 PSIG

SHEET REV. NO. 2 3 4 5 6

DATE 02/01/1995 14/12/2000 28/05/2001 30/06/2009 26/04/2018 51001

Client : HRRL Dept./Sect. : 16/43

GATE VALVE SPECIFICATION MANUF'S OFFER

BONNET BOLTED ASTM A 105

STEM RISING 13% CR.STEEL (NO CASTING)

WEDGE DISC SOLID STELLITED

BODY SEAT RING RENEWABLE STELLITED

STEM PACKING RENEWABLE WITH CORROSION INHIBITED DIE FORMED FLEXIBLE

BONNET BOLTS ASTM A193 GR B7

BONNET NUTS ASTM A194 GR 2H

BONNET GASKET SP WND SS316 - GRAFOIL F1LLER

SPECIAL SERVICE I.B.R STEAM/CONDENSATE/BOILER FEED WATER;

HYDROSTATIC TEST BODY : 2975 PSIG. SEAT : 2175 PSIG

SHEET REV. NO. 2 3 4 5 6

DATE 02/01/1995 14/12/2000 28/05/2001 30/06/2009 26/04/2018 51002

Client : HRRL Dept./Sect. : 16/43

GATE VALVE SPECIFICATION MANUF'S OFFER

DESCRIPTION CONSTRUCTION MATERIAL CONSTRUCTION MATERIAL

BONNET BOLTED ASTM A 350 GR.LF2 CL.1

STEM RISING SS316 (NO CASTING)

WEDGE DISC SOLID STELLITED

BODY SEAT RING RENEWABLE STELLITED

STEM PACKING RENEWABLE WITH CORROSION INHIBITED DIE FORMED FLEXIBLE

BONNET BOLTS ASTM A320 GR L7

BONNET NUTS ASTM A194 GR 4/GR 7

BONNET GASKET SP WND SS316 - GRAFOIL FILLER

SPECIAL SERVICE LT UPTO -45 DEG. C.

HYDROSTATIC TEST BODY : 2975 PSIG. SEAT : 2175 PSIG

SHEET REV. NO. 4 5 6 7 8