PAPER PRESENTATION
ON
SHORTEST PATH COMPUTATION IN A
TRANSMISSION LINE NETWORK
ABSTRACT
In this paper a generalized algorithm has been developed to find the shortest path in a
transmission line network. The selected network or graph for the proposed algorithm has
the ability to traverse a network or graph with any complex structures, with any number
of nodes and with any number of paths this algorithm has been developed by considering
the source node as the starting node and designation node as the end node.
Dijikstras’s algorithm is used to find the closest node from the source node. The proposed
software is developed, tested and verified with an example. The problem of finding
efficient routing algorithm has been a fundamental area, in the field of a transmission line
network. Routing is the act of transform the power from source to destination.
INTRODUCTION
Routing in network involves two basic activities
Determining optimal routing paths and
Transporting power from through an inter network.
An ideal routing algorithm should strive to find the optimal path for power transmission
within a least transmission cost so as to satisfy the customers demand for a fast service.
The optimality attributes which usually implies an efficient use of the network resources
so as to optimize a selected performance measures such as network through put.
This paper focuses on the minimum short path routing where the goal is to minimize the
weight of the traveling path and reduces the investment cost on transmission line.
CONSTRUCTION OF TRANSMISSION LINES:
Transfer of bulk power from the generating station/substation to the load centers.
Power transmission at higher voltage and reduced current for the same quantum
of energy there by reducing the line loss (I2R)
Efficient, safe and reliable power supply.
AVAILABLE VOLTAGE LEVELS IN KV
AC HVDC
India 66 500
110
132 800
220
400
Other countries 66 600
275
370
735
1000
1100
CONSTRUCTION ACTIVITIES
Survey
Design manufactures
Laying of foundation
Erecting of superstructures
Stringing of conductors
Commissioning
TOWER
This is the most important items to support the power conductor and ground wires at the
required distance above ground level maintaining an appropriate inter conductor spacing
in all operating condition. This constitutes about 30 to 40% of the cost of the line.
FACTORS INFLUENCING THE TOWER
Voltage level
Limitation of row
Audio and interference
Electrostatic fields
TYPES OF TOWERS
Broad Based
Narrow Based
Square Base
Rectangular Base
Y or V shaped supported by external and internal guys.
STRUCTERS
Mild steel
Mild steel + High tensile steel
SHAPES
Vertical
Horizontal
Delta
CROSSINGS
River crossing
Railway crossing
Road crossing
Power line crossing
Communication line crossing
Aerodromes
Radar centers
Rifle ranges (Military target areas)
Helipads
LINE PLANNING
The basic parameters for selection of material and standards, once decided will help
adopting sound construction practices estimation of material labour and transports
facilities should have been assessed. The material should be made available at site,
required working equipped with tools and tackles should be available as when required.
SURVEY OF THE PROPOSED ROUTE OF LINE
The first step to be taken prior to the design or construction of any line is to conduct
proper survey of the area which the line is to be passed, toposheet map of the area which
indicate town roads, streams, river shills, railway lines may be collected and the proposed
line should be marked on it before finalizing the route the following parameters should be
kept in mind.
The shortest route practicable
As closed as possible to the road for easy during the construction and
maintenance.
Right direction in which future load is anticipated.
Angle points should be less.
AVOIDING THE FOLLOWING AREA
Restricted and difficult country side
Urban development area
Restricted access for transport vehicles
Abrupt changes in route
Wide river and railway crossing
Property to aerodromes
Natural hazards, like stapes, valleys, hills, lakes, gardens, forest, play grounds.
MINIMUM LAND WIDTH REQUIRED FOR POWER LINE
CONSTRUCTION.
11KV 7 meters
33KV 15 meters
66KV 18 meters
110KV 22meters
132KV 27 meters
220KV 35 meters
400KV 52 meters
PROBLEM STATEMENT
The main objective of the proposed algorithm is to find the minimum path in a
transmission line network. Starting from the source node to the destination node, there
may be several paths in a net work. The lengths of a each path are taken in to
consideration and they are compared
with each other respectively. Now the path having the minimum length among all the
paths from source to destination will be regarded as the minimum path of the network.
This is the normal procedure for finding the shortest path or minimum path of a
transmission network or graph.
Several algorithms have been discovered so far to compute the short path in a graph. For
instance Dijikstra’s algorithm computes the shortest path from the source node to every
other node in the network. Similarly Wars Hal’s algorithm computes the shortest path
from the source node to destination node of a given network.
All this algorithms described so far, find the minimum path of a communication network
or a graph, where the network or graph, where network or the graph has exactly only one
minimum path here question arises. What will be the minimum path if a network or graph
has more than two paths having the same length (eight), that too the minimum lengths?
The solution for the above question has not been answered yet. But the proposed
algorithm gives a precise solution for the question discussed above.
DESCRIPTION OF THE PROPOSED SYSTEM
The proposed gives an exact solution for the question that has been asked below.
What will be the minimum path if two or more paths have the same length of a given
graph? (all those paths having the minimum length).This procedure is a precise one
which exact shortest path of a given graph and also gives the solution for the question
discussed above and is completely different from Dijikstra’s and Wars hall’s algorithm.
Dijikstra’s has analyzed the various paths from source to destination and has given the
minimum path among the N given paths as the shortest path of the graph.Warshall has
traversed the entire graph from the beginning to end and has given the minimum path
from the Oth vertices to the Nth vertices. But this paper gives a perfect solution for the
above query.
Let us consider a graph or a network G with N vertices (nodes)and P paths. irst the
various paths from the source node to the destination node are taken not consideration.the
second step is to find the length path has been found out . If two or more paths have the
minimum length then the paths having the minimum lengths ate taken into consideration
separately. The number of edges of these paths is noted. the path having the minimum
lengths will be the shortest path of the given graph .even now if two paths has the sane
number of edges and same weight then both the paths are the shortest paths from the
source node to the destination node of the given graph.
PATH COMPUTATION ALGORTHIM
1. The number of vertices of the given Graph N is noted
2. The source node and the destination node are noted
3. The number of paths and the number edges of each path are got in the run of time
of the current program.
4. The lengths of each path are found out by adding the weight of each edge in as
separable variable.
5. By using the exchange sort procedure the lengths of each path has been sorted and
store in a separate array.
6. Now the first element in the array will have the minimum length
7. The paths are also sorted simultaneously using the string comparison functions.
8. If two or more paths have the same length, that too the minimum lengths, then the
paths having the same minimum lengths are sorted in a separate array
9. The numbers of edges of each path are got in run time of the program and the
total numbers of edges of each path are stored in a separate array.
10. These elements are again stored using the exchange sort procedure and the sorted
elements are stored in a separate array available.
11. The first element in the array will have the path with the minimum number of
edges.
12. Finally the corresponding path of the first element is considered to be the shortest
path of the given graph G with N vertices.
VERIFICATION WITH AN EXAMPLE
1
3
B D
2
4
6
A E F
2
8
7
5
C G
4
Graph with 7 Nodes and 7 Paths
FLOW CHART FOR PATH COMPUTATION ALOGRITHM
Start
Number of paths, edges &
weights (noted)
Path length is stored
Path length is compared
Swap the lengths & store the minimum length
path in a variable
False
If two
paths have
the same
length
True
Find the path with minimum edges &store in an array
Print the minimum path
Stop
OUT PUT
THE PATHS ARE AS FOLLOWD
1. THE 1 PATH IS (ABDFG) AND IT’S
2. LENGTHIS 16
3. THE 2 PATH IS (ABB1DFG) AND IT’S LENGTH IS 17
4. THE 3 PATH IS (ABG) AND IT’S LENGTH IS 10
5. THE 4 PATH IS (ABB1 G) AND IT’S LENGTH IS 11
6. THE 5 PATH IS (AEG) AND IT’S LENGTH IS 8
7. THE 6 PATH IS (AG) AND IT’S LENGTH IS 8
8. THE 7 PATH IS (ACG) AND IT’S LENGTH IS 9
9. THE NUMBER OF EDGESOF PATH AEG:2
10. THE NUMBER OF EDGES OF PATH AG:1
11. THE SHORTEST PATH IS (AG) WITH LENGTH 8 AND 1 EDGE.
APPLICATIONS
Industrial automation
Telecommunication
Civil road construction
Electrical transmission lines
Local area net works (LAN).
CONCLUSION
Hence the proposed algorithm is used to find the minimum path of a graph or a
network with any complex structure. The generalized software is highly interactive
and user friendly. The algorithm is coded in C and the results are verified with
different net work configuration for various numbers of nodes. It can address any real
world problem.
1. find the cheapest way to travel between two locations.
2. Finding the minimum path even if there are two paths with the same length that too
the minimum length.
The major advantages of the system are fast and accurate information retrieval, ease
of use and time saving.
REFERENCES
1. Data structures and algorithms by Scham’s series
2. Construction of Transmission Lines at power training centre at PSTI manual
3. Programming in ANSI C by BalaGuruswamy
1.