Scribd
Upload
253 views1 page

MTL1143 Transmitter Power Supply With Repeat Output: 1 Channel, Smart For 2/4-Wire Transmitters

MTL1148

Uploaded by

Oel Naub
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
253 views1 page

MTL1143 Transmitter Power Supply With Repeat Output: 1 Channel, Smart For 2/4-Wire Transmitters

MTL1148

Uploaded by

Oel Naub
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

DRAFT - 05 September 2014

Technical data
September 2016
MTL signal conditioners EPS 1143 rev 2

MTL1143 Transmitter
Power Supply with PWR

Repeat Output
+ 1 Tx+ 5 +
+ -
-

Load
2 Input 6 4-20mA Output 1
-
3 Com

1 Channel, Smart for


7 +

Load
8 4-20mA Output 2
-

2/4-wire transmitters D E

Vs- Vs+
The MTL1143 is a Single Channel Analogue
Input isolator with dual outputs. HART
communication is provided for Smart two wire
transmitters via Output 1. The transmitter can
be interrogated either from the operator station Terminals Function
or by a hand-held communicator (HHC). Power 1 Tx+
for this module is supplied via the power bus
2 Input
embedded in the DIN rail.
The PBUS6.2 kit must be ordered separately. 3 Common
10 x 2 way power clips are provided to power 5 Output + (with HART)
20 modules. 6 Output - (with HART)
The MTL1991 is used to feed power onto 7 Repeat Output +
the bus.
8 Repeat Output -
D Power supply -ve
E Power supply +ve

SPECIFICATION see also common specification


Number of channels One, with 2 fully floating outputs
Location of Transmitter Safe area
Input and output signal range 4 to 20mA
Under/Over-range <3.0mA to >23mA
System output load resistance (source mode) @ 20mA: O/P1 0 to 330Ω, O/P2 0 to 380Ω
@ 24mA: O/P1 0 to 270Ω, O/P2 0 to 300Ω
Power supply voltage 18V to 32V DC
Transmitter supply voltage (field power supply) ≥16.5V at 20mA
Transfer Accuracy at 20 °C Transmitter powering mode: < ±20μA
Temperature drift <2μA/°C (-20 to +60°C)
Maximum current consumption (with 20mA signal) 53mA @ 24V dc
Maximum power dissipation within unit <0.85W @ 24V dc
Digital Signal Bandwidth Approx. 3dB @ 1KHz to 2.2KHz
Isolation 50V ac or dc between power, field and system circuits.
(tested to 1500V)

Eaton Electric Limited, EUROPE (EMEA): The given data is only intended as a product
Great Marlings, Butterfield, Luton +44 (0)1582 723633 description and should not be regarded as a legal
warranty of properties or guarantee. In the interest
Beds, LU2 8DL, UK. [email protected]
of further technical developments, we reserve the
Tel: + 44 (0)1582 723633 Fax: + 44 (0)1582 422283 right to make design changes.
THE AMERICAS:
E-mail: [email protected]
+1 800 835 7075
www.mtl-inst.com
[email protected]
© 2016 Eaton
All Rights Reserved ASIA-PACIFIC:
Publication No. EPS 1143 rev 2 230916 +65 6 645 9888
September 2016 [email protected]

You might also like