Copyright Shell Group of Companies. No reproduction or networking permitted without license from Shell.

Not for res

DEP 31.38.01.15-Gen Class 11412, rev. H Page 1 of 15

CLASS 11412

This document has been supplied under license by Shell to: Metric units
UOP Honeywell [email protected] 24/01/2018 01:56:49
 DEP 31.38.01.15-Gen Class 11412, rev. H Page 2 of 15

Design limits Branch connections 90 degrees

Temperature (°C) Branch Size

-29 0 50 75 100 125 150 Run 15 20 25 40 50 80 100 150 200 250 300 350 400 450 500 600 750 900 1050 1200
Pressure (Barg) size
DN 15-1200 19.6 19.6 19.2 18.4 17.7 16.7 15.8 1200 N N N N P E E E E E E E E E E B B B B A
1050 N N N N P E E E E E E E E E E B B B A
900 N N N N P E E E E E E E E B B B B A
750 N N N N P E E E E E E E B B B B A
Notes 600 N N N N P E E E E E B B B B B A
- Design limits acc. to ASME B16.5 flange rating mat. grp 1.1 500 N N N N P E E E E E B B B B A
- Due to supply chain constraints the wall thickness for pipe DN300 (NPS12) SCH20 (6.35 mm/ 0.25 inch) is 450 N N N N P E E E E B B B B A
ordered as per MESC description with wall thickness 7.14mm (0.281 inch). 400 N N N N P E E E E B B B A
- API 5L-B welded pipe (erw and saw) is normally the most economic choice 350 N N N N P E E E B B B A
- For bending of pipe see DEP 31.38.01.31-Gen. 300 N N N N P E E B B B A
- For basis of design see DEP 31.38.01.10-Gen. 250 N N N N P E B B B A
- Use of coated bolt sets should be considered when exposed to marine environments. 200 N N N N P E B B A
- Piping class range DN 15 [NPS 1/2]up to/incl DN 600[NPS 24] design meets full vacuum at ambient condition 150 N N N N P B B A
For DN 750 [NPS 30] to 1200 [NPS 48], if vacuum condition can occur, piping to be designed accordingly 100 N N N N U B A
- For hydrotest vent & drains reference is made to standard drawing S.38.154 80 N N N N U A
- Monoflange slimline valves shall be selected for clean services only. 50 N N M M J
- Monoflange valve assemblies are offered fitted with 1/2" BSP to either 1/2", 3/8" or 10mm. compression tube 40 N M M J
fittings. In the assemblies as a default, the 1/2" compression tube fitting is listed. However, selection of relevant 25 M M J
Monoflange valve assembly to be agreed with principal based on associated local instrument tube fitting 20 M J
standard. 15 J
- The use of red. bore ball valves is considered most economical. Use full bore ball valves only when necessary for
process/operating requirements
- Piston type check valves (DN 15-40) [NPS 1/2-1-1/2] for horizontal mounting only
- The choice of gate valves, swing type check valves vs triple eccentric butterfly valves, dual plate check valves Code Explanation of characters
shall be based upon total purchase and installation cost, as well as weight and space savings. Eccentric butterfly A Equal tee
valves and dual plate check valves shall not be used in fouling or abrasive services. B Reducing tee
E Branch outlet
J Equal tee BW (alternative SW)
Table of schedules M Reducing tee BW (alternative SW)
N Branch fitting (alternative Branch outlet SW)
DN Schedule P Branch outlet BW (alternative Branch outlet SW)
15 80 U Reducing tee BW (alternative Branch outlet SW)
20 80
25 80
40 80
50 40
80 40
100 40
150 40
200 20
250 20
300 20
350 20
400 20
450 20
500 20
600 20
750 10
900 10 Carbon steel Plant
1050 STD Class no. 11412 Consignee
1200 STD ASME rating CLASS 150 Engineered by
Corrosion allowance 1 mm Principal
Revision letter H Contr. job no.
Revision date 02/2017 Project no.

This document has been supplied under license by Shell to: Metric units
UOP Honeywell [email protected] 24/01/2018 01:56:49
 DEP 31.38.01.15-Gen Class 11412, rev. H Page 3 of 15

COMPONENT MATERIAL DESCRIPTION

(For full material description see relevant MESC buying description.)

Pipe Valves

PIPE Pipe DN 15-600 ASTM A106-B BAFF Ball valve float FB flgd DN 15-150 Body: ASTM A105/A216-WCB/WCC
PIPE Pipe DN 400-1200 ASTM A672-C65 cl22 Trim: AISI 316, PTFE
PISM Pipe (API 5L-B sml) DN 100-100 API 5L-B (sml) BARF Ball valve float RB flgd DN 15-250 Body: ASTM A105/A216-WCB/WCC
PIWE Pipe (API 5L-B erw) DN 150-500 API 5L-B (erw) Trim: AISI 316, PTFE
PIWS Pipe (API 5L-B saw) DN 600-600 API 5L-B (saw) BTFF Ball valve trunn FB flgd DN 200-600 Body: ASTM A105/A216-WCB/WCC
Trim: AISI 316, filled PTFE
Flanges BTRF Ball valve trunn RB flgd DN 300-600 Body: ASTM A105/A216-WCB/WCC
Trim: AISI 316, filled PTFE
BLFL Blind flange DN 15-1200 ASTM A105 BUTF Butterfly valve triple of flgd DN 200-1200 Body: ASTM A216-WCB/WCC
LJFL Lap joint flange --- ASTM A105 Trim: CS, Duplex, Stellite
SBNF Spectacle blind DN 15-400 ASTM A516-60/65/70 CHDF Check valve dual plate flgd DN 300-1200 Body: ASTM A216-WCB/WCC
SPFL Spade DN 750-1200 ASTM A516-70 Trim: AISI 410
SPNF Spade DN 15-600 ASTM A516-60/65/70 CHVF Check valve flgd DN 15-50 Body: ASTM A105
SPRT Spacer ring DN 750-1200 ASTM A516-60/65/70 Trim: AISI 410
SRNF Spacer ring DN 15-600 ASTM A516-60/65/70 CHVF Check valve flgd DN 80-600 Body: ASTM A105/A216-WCB/WCC
WNFL Welding neck flange DN 15-1200 ASTM A105 Trim: AISI 410 , Stellite
GAVF Gate valve flgd DN 15-50 Body: ASTM A105 (Normalised) Trim: AISI
Fittings 410/ Stellite 6
GAVF Gate valve flgd DN 80-600 Body: ASTM A105/A216-WCB/WCC
CAPB Cap bw DN 15-1200 ASTM A234-WPB Trim: AISI 410 , Stellite
E45B Elbow 45 deg LR bw DN 15-600 ASTM A234-WPB GLVF Globe valve flgd DN 15-50 Body: ASTM A105 (Normalised) Trim: AISI
E45B Elbow 45 deg LR bw DN 750-1200 ASTM A234-WPBW 410/ Stellite 6
E90B Elbow 90 deg LR bw DN 15-600 ASTM A234-WPB GLVF Globe valve flgd DN 80-200 Body: ASTM A105/A216-WCB/WCC
E90B Elbow 90 deg LR bw DN 750-1200 ASTM A234-WPBW Trim: AISI 410 , Stellite
TEEB Tee equal bw DN 15-600 ASTM A234-WPB MSBG Monofl Slimline SBB G 1/2 TubF DN 15-20 Body: ASTM A182-F316
TEEB Tee equal bw DN 750-1200 ASTM A234-WPBW Trim: AISI 316, PTFE
MSBH Monofl Slimline SBB G 3/8 TubF DN 15-20 Body: ASTM A182-F316
Reducing fittings Trim: AISI 316, PTFE
MSBJ Monofl Slimline SBB G10mm TubF DN 15-20 Body: ASTM A182-F316
BN3F Branch fitting flgd DN 40-1200 ASTM A105 Trim: AISI 316, PTFE
BN3P Branch fitting plain DN 40-1200 ASTM A105 VSBG Monofl ball SBB G 1/2 Tub F DN 15-20 Body: ASTM A182-F316
BROB Branch outlet bw DN 400-1200 ASTM A105 Trim: AISI 316, PTFE
BRSB Branch outlet bw DN 150-1200 ASTM A105 VSBH Monofl ball SBB G 3/8 Tub F DN 15-20 Body: ASTM A182-F316
RECB Reducer concentric bw DN 20-600 ASTM A234-WPB Trim: AISI 316, PTFE
RECB Reducer concentric bw DN 750-1200 ASTM A234-WPBW VSBJ Monofl ball SBB G 10mm Tub F DN 15-20 Body: ASTM A182-F316
REEB Reducer eccentric bw DN 20-600 ASTM A234-WPB Trim: AISI 316, PTFE
REEB Reducer eccentric bw DN 750-1200 ASTM A234-WPBW
TERB Tee reducing bw DN 20-600 ASTM A234-WPB Instruments
TERB Tee reducing bw DN 750-1200 ASTM A234-WPBW
TWND Thermowell flgd DN 40 DN 40-40 ASTM B564 UNS N04400
TWNS Thermowell flgd DN 40 L=230 mm --- ASTM B564 UNS N04400
TWNL Thermowell flgd DN 40 L=255 mm --- ASTM B564 UNS N04400

This document has been supplied under license by Shell to: Metric units
UOP Honeywell [email protected] 24/01/2018 01:56:49
 DEP 31.38.01.15-Gen Class 11412, rev. H Page 4 of 15

Miscellaneous

GKMA Gasket camprofile DN 750-1200 AISI 316, Graphite

SS centring ring
GKSW Gasket spiral wound DN 15-600 AISI 316, Graphite
CS centring-/SS inner ring
MTRR Meterrun DN 15-40 Alloy 400/ASTM A350-LF2 cl 1 end flanges
ORFS Orifice flange set DN 50-600 ASTM A105
PLUG Plug NPT DN 15-50 ASTM A105
ST1B Strainer Y-type (1 mm ca) DN 50-400 Sieve: AISI 316
STB1 Studbolt with nuts --- ASTM A193-B7/A194-2H
Zn-Ni Electro pl + PTFE top coat

STBT Studbolt with nuts --- ASTM A193-B7/A194-2H

This document has been supplied under license by Shell to: Metric units
UOP Honeywell [email protected] 24/01/2018 01:56:49
 DEP 31.38.01.15-Gen Class 11412, rev. H Page 5 of 15

PIPING COMPONENTS

Nominal pipe size

15 20 25 40 50 80 100 150 200 250 300 350 400 450 500 600 750 900 1050 1200
Item description MESC

Pipe

Pipe 743005 0 181 281 381 581 691

Pipe 743005 1 031 491
Pipe 743005 2 111 391 791
Pipe 743005 3 201 731
Pipe 743005 4 211 691
Pipe 743005 5 211 691
Pipe 743023 0 371
Pipe 743023 1 001 581
Pipe 743023 2 121
Pipe 743023 5 471 781
Pipe 743023 6 081 381
Pipe (API 5L-B erw) 741314 2 111 391 791
Pipe (API 5L-B erw) 741314 3 191 731
Pipe (API 5L-B erw) 741314 4 211 691
Pipe (API 5L-B erw) 741314 5 211
Pipe (API 5L-B saw) 741317 5 691
Pipe (API 5L-B sml) 741312 1 491

Flanges

Blind flange 766211 0581 0621 0661 0681 0701 0721 0741 0761 0781 0801 0821 0841 0861 0881 0901 0921
Blind flange 767012 0561 0621 0681 0741
Spacer ring 768875 0031 0061 0091 0121
Spacer ring 768902 0021 0041 0061 0081 0101 0121 0141 0161 0181 0201 0221 0241 0261 0281 0301 0321
Spade 768895 0031 0061 0091 0121
Spade 768930 0021 0041 0061 0081 0101 0121 0141 0161 0181 0201 0221 0241 0261 0281 0301 0321
Spectacle blind 768960 0021 0041 0061 0081 0101 0121 0141 0161 0181 0201 0221 0241 0261
Welding neck flange 766278 3521 3541 3561 3581 3101 3121 3141 3161 2081 2101 2121 2141 2161 2181 2201 2241
Welding neck flange 767082 0151 0391 0591 0741

This document has been supplied under license by Shell to: Metric units
UOP Honeywell [email protected] 24/01/2018 01:56:49
 DEP 31.38.01.15-Gen Class 11412, rev. H Page 6 of 15

PIPING COMPONENTS
Nominal pipe size
15 20 25 40 50 80 100 150 200 250 300 350 400 450 500 600 750 900 1050 1200
Item description MESC

Fittings

Cap bw 763019 0181 0241 0301 0381 0551 0751 0951 1151 1321 1521 1721 1921 2121 2321 2551 2751 6151 7651 8391 8991
Elbow 45 deg LR bw 763038 5681 5741 5801 5881 6051 6251 6451 6651 6821 7021 7221 7421 7621 7821 8051 8251 1151 2651 3391 3991
Elbow 90 deg LR bw 763040 5681 5741 5801 5881 6051 6251 6451 6651 6821 7021 7221 7421 7621 7821 8051 8251 8621 8991 9411 9591
Tee equal bw 763084 5681 5741 5801 5881 6051 6251 6451 6651 6821 7021 7221 7421 7621 7821 8051 8251 1151 2651 3391 3991

Valves

Ball valve float FB flgd 770025 5031 5041 5051 5071 5081 5101 5121 5131
Ball valve float RB flgd 770025 0031 0041 0051 0071 0081 0101 0121 0441 0451 0461
Ball valve trunn FB flgd 770228 5151 5161 5171 5181 5191 5201 5211 5231
Ball valve trunn RB flgd 770228 0171 0181 0191 0201 0211 0231
Butterfly valve triple of flgd 774130 0151 0161 0171 0181 0191 0201 0211 0231 0261 0291 0321 0341
Check valve dual plate flgd 776711 0171 0181 0191 0201 0211 0231 0261 0291 0321 0341
Check valve flgd 771013 0031 0041 0051 0071 0091
Check valve flgd 771020 0101 0121 0141 0151 0161 0171 0181 0191 0201 0211 0231
Gate valve flgd 772020 3031 3041 3051 3071 3091 0101 0121 0141 0151 0161 0171 0181 0191 0201 0211 0231
Globe valve flgd 773014 0031 0041 0051 0071 0091
Globe valve flgd 773020 0101 0121 0141 0151
Monofl ball SBB G 1/2 Tub F 778558 8701 9201
Monofl ball SBB G 10mm Tub F 778558 8721 9221
Monofl ball SBB G 3/8 Tub F 778558 8711 9211
Monofl Slimline SBB G 1/2 TubF 778559 8701 9201
Monofl Slimline SBB G 3/8 TubF 778559 8711 9211
Monofl Slimline SBB G10mm TubF 778559 8721 9221

Miscellaneous

Gasket camprofile 854190 0481 0541 0601 0661

Gasket spiral wound 854136 3041 3061 3081 3121 3141 3181 3201 3241 3261 3281 3301 3321 3341 3361 3381 3421
Meterrun 766496 0521 0541 0561 0581
Orifice flange set 766295 0811 0821 0231 0241 0031 0041 0051 0061 0071 0081 0091 0101
Plug NPT 760518 0081 0121 0161 0181 0201
Strainer Y-type (1 mm ca) 768319 4021 4041 4061 4081 3971 3981 4221 4001 4241

This document has been supplied under license by Shell to: Metric units
UOP Honeywell [email protected] 24/01/2018 01:56:49
 DEP 31.38.01.15-Gen Class 11412, rev. H Page 7 of 15

REDUCING/PIPING COMPONENTS

Run x Br RECB REEB TERB Thermowell flgd DN 40

20 x 15 7630721371 7630731371 7630890351 Length (mm) MESC number
25 x 15 7630721471 7630731471 7630890451 230 7683375111
25 x 20 7630721571 7630731571 7630890551 255 7683375121
40 x 15 7630721671 7630731671 305 7683375131
40 x 20 7630721771 7630731771 7630890751 355 7683375141
40 x 25 7630721871 7630731871 7630890851 405 7683375151
50 x 20 7629461921 7629611921 455 7683375161
50 x 25 7630721961 7630731961 7630891091
50 x 40 7630722061 7630732061 7630891181
80 x 40 7630722261 7630732261
80 x 50 7630722351 7630732351 7630891321
100 x 40 7630722501 7630732501
100 x 50 7630722651 7630732651 7630891531
100 x 80 7630722751 7630732751 7630891651
150 x 80 7630722951 7630732951 7630891771
150 x 100 7630723051 7630733051 7630891891
200 x 100 7630723221 7630733221 7630892101
200 x 150 7630723331 7630733331 7630892301
250 x 100 7629463401 7629613401 7630892581
250 x 150 7630723531 7630733531 7630892761
250 x 200 7630723611 7630733611 7630892891
300 x 150 7630723861 7630733861 7630893151
300 x 200 7630723921 7630733921 7630893261
300 x 250 7630724021 7630734021 7630893481
350 x 150 7629466001 7629616001
350 x 200 7630724231 7630734231 7630893881
350 x 250 7630724301 7630734301 7630894131
350 x 300 7630724421 7630734421 7630894391

This document has been supplied under license by Shell to: Metric units
UOP Honeywell [email protected] 24/01/2018 01:56:49
 DEP 31.38.01.15-Gen Class 11412, rev. H Page 8 of 15

REDUCING/PIPING COMPONENTS

Run x Br RECB REEB TERB

400 x 200 7630724541 7630734541
400 x 250 7630724631 7630734631 7630895031
400 x 300 7630724701 7630734701 7630895291
400 x 350 7630724821 7630734821 7630895541
450 x 250 7630725201 7630735201 7630896021
450 x 300 7630725501 7630735501 7630896261
450 x 350 7630725811 7630735811 7630896501
450 x 400 7630726111 7630736111 7630896741
500 x 300 7630726401 7630736401 7630897461
500 x 350 7630726711 7630736711 7630897701
500 x 400 7630727011 7630737011 7630897941
500 x 450 7630727311 7630737311 7630898181
600 x 300 7630898661
600 x 350 7630898901
600 x 400 7630728811 7630738811 7630899141
600 x 450 7630729111 7630739111 7630899381
600 x 500 7630729411 7630739411 7630899621

Comp.name Description
BN3F Branch fitting flgd
BN3P Branch fitting plain
BROB Branch outlet bw
BRSB Branch outlet bw
RECB Reducer concentric bw
REEB Reducer eccentric bw
TERB Tee reducing bw

This document has been supplied under license by Shell to: Metric units
UOP Honeywell [email protected] 24/01/2018 01:56:49
 DEP 31.38.01.15-Gen Class 11412, rev. H Page 9 of 15

REDUCING/PIPING COMPONENTS

Run x Br RECB REEB TERB Run x Br RECB REEB TERB

750 x 400 7630956491 1050 x 600 7630967811
750 x 450 7630957091 1050 x 750 7630968091
750 x 500 7630957601 1050 x 900 7629526301 7629726301 7630968391
750 x 600 7629510881 7630787021 7630958091 1200 x 600 7629896421
900 x 450 7630963431 1200 x 750 7629897021
900 x 500 7630963491 1200 x 900 7629897621
900 x 600 7630963691 1200 x 1050 7630618461 7630798461 7630969801
900 x 750 7630613041 7630793041 7630964281

This document has been supplied under license by Shell to: Metric units
UOP Honeywell [email protected] 24/01/2018 01:56:49
 DEP 31.38.01.15-Gen Class 11412, rev. H Page 10 of 15

REDUCING/PIPING COMPONENTS

Branch Run pipe BN3F BN3P BROB BRSB

15 40 - 40 7680370611 7680310361
15 50 - 50 7680370631 7680310371
15 80 - 200 7680370641 7680310381
15 250 - 900 7672292531 7672692041
15 1050 - 1200 7672292541 7672692051
20 50 - 50 7680370661 7680310401
20 80 - 100 7680370671 7680310411
20 150 - 300 7680370691 7680310431
20 350 - 900 7672292571 7672692091
20 1050 - 1200 7672292581 7672692101
25 80 - 80 7680370731 7680310451
25 100 - 100 7680370751 7680310461
25 150 - 250 7680370761 7680310471
25 300 - 900 7672292611 7672692141
25 1050 - 1200 7672292621 7672692151
40 80 - 80 7680370791 7680310511
40 100 - 100 7680370801 7680310521
40 150 - 150 7680370821 7680310531
40 200 - 300 7680370831 7680310551
40 350 - 600 7680370851 7680310571
40 750 - 900 7672292651 7672692191
40 1050 - 1200 7672292661 7672692201
50 150 - 150 7678312171
50 200 - 250 7678312181
50 300 - 450 7678312201
50 500 - 900 7678312241
50 1050 - 1200 7678902131
80 200 - 200 7678312281
80 250 - 250 7678312291
80 300 - 350 7678312301
80 400 - 500 7678312321
80 600 - 600 7678312351
80 750 - 900 7678902201
80 1050 - 1200 7678902261

This document has been supplied under license by Shell to: Metric units
UOP Honeywell [email protected] 24/01/2018 01:56:49
 DEP 31.38.01.15-Gen Class 11412, rev. H Page 11 of 15

REDUCING/PIPING COMPONENTS

Branch Run pipe BN3F BN3P BROB BRSB

100 300 - 350 7678312391
100 400 - 500 7678312411
100 600 - 900 7678312441
100 1050 - 1200 7678902391
150 350 - 350 7678312471
150 400 - 400 7678312481
150 450 - 450 7678312491
150 500 - 500 7678312501
150 600 - 600 7678312511
150 750 - 750 7678902461
150 900 - 900 7678902491
150 1050 - 1200 7678902521
200 400 - 400 7679001901
200 450 - 450 7679001911
200 500 - 500 7679001921
200 600 - 600 7679001941
200 750 - 750 7678035591
200 900 - 900 7678035621
200 1050 - 1050 7678030411
200 1200 - 1200 7678030421
250 500 - 500 7679001991
250 600 - 600 7679002001
250 750 - 750 7678035721
250 900 - 900 7678035751
250 1050 - 1050 7678030461
250 1200 - 1200 7678030471
300 750 - 750 7678035841
300 900 - 900 7678035861
300 1050 - 1050 7678030511
300 1200 - 1200 7678030521
350 750 - 750 7678035881
350 900 - 900 7678035901
350 1050 - 1050 7678030561
350 1200 - 1200 7678030571
400 900 - 900 7678035921
400 1050 - 1050 7678030601
400 1200 - 1200 7678030611
450 1050 - 1050 7678030631
450 1200 - 1200 7678030641
500 1050 - 1050 7678030661
500 1200 - 1200 7678030671

This document has been supplied under license by Shell to: Metric units
UOP Honeywell [email protected] 24/01/2018 01:56:49
 DEP 31.38.01.15-Gen Class 11412, rev. H Page 12 of 15

BOLTING

Coated boltset std flange Std boltset mrun flg Coated boltset blind/spc
DN nr inch x mm MESC number DN nr inch x mm MESC number DN nr inch x mm MESC number
15 4 1/2 x 60 8138150231 15 4 5/8 x 130 8138612781 15 4 1/2 x 70 8138150251
20 4 1/2 x 70 8138150251 20 4 5/8 x 130 8138612781 20 4 1/2 x 80 8138150271
25 4 1/2 x 70 8138150251 25 4 5/8 x 130 8138612781 25 4 1/2 x 80 8138150271
40 4 1/2 x 80 8138150271 40 4 3/4 x 140 8138613351 40 4 1/2 x 80 8138150271
50 4 5/8 x 90 8138150751 50 4 5/8 x 100 8138150771
80 4 5/8 x 100 8138150771 Coated boltset orificeflg 80 4 5/8 x 110 8138150791
100 8 5/8 x 100 8138150771 DN nr inch x mm MESC number 100 8 5/8 x 110 8138150791
150 8 3/4 x 110 8138151431 50 8 5/8 x 130 8138150831 150 8 3/4 x 120 8138151451
200 8 3/4 x 110 8138151431 80 8 3/4 x 140 8138151491 200 8 3/4 x 130 8138151471
250 12 7/8 x 120 8138152161 100 8 3/4 x 150 8138151511 250 12 7/8 x 140 8138152201
300 12 7/8 x 120 8138152161 150 12 3/4 x 150 8138151511 300 12 7/8 x 150 8138152221
350 12 1 x 140 8138152991 200 12 7/8 x 170 8138152261 350 12 1 x 170 8138153051
400 16 1 x 140 8138152991 250 16 1 x 190 8138153091 400 16 1 x 170 8138153051
450 16 1 1/8 x 150 8138153841 300 16 1 1/8 x 210 8138153961 450 16 1 1/8 x 180 8138153901
500 20 1 1/8 x 160 8138153861 350 20 1 1/8 x 220 8138153981 500 20 1 1/8 x 200 8138153941
600 20 1 1/4 x 180 8138154701 400 20 1 1/4 x 230 8138154801 600 20 1 1/4 x 220 8138154781
750 28 1 1/4 x 240 8138154821 450 24 1 1/4 x 250 8138154841 750 28 1 1/4 x 280 8138154901
900 32 1 1/2 x 290 8138156411 500 24 1 1/4 x 260 8138154861 900 32 1 1/2 x 340 8138156511
1050 36 1 1/2 x 300 8138156431 600 24 1 1/2 x 290 8138156411 1050 36 1 1/2 x 360 8138156551
1200 44 1 1/2 x 320 8138156471 1200 44 1 1/2 x 390 8138156611
Std boltset orifice flg
Std boltset standard flg DN nr inch x mm MESC number Std boltset blind/spacer
DN nr inch x mm MESC number 50 8 5/8 x 130 8138612781 DN nr inch x mm MESC number
15 4 1/2 x 60 8138611531 80 8 3/4 x 140 8138613351 15 4 1/2 x 70 8138611551
20 4 1/2 x 70 8138611551 100 8 3/4 x 150 8138613371 20 4 1/2 x 80 8138611571
25 4 1/2 x 70 8138611551 150 12 3/4 x 150 8138613371 25 4 1/2 x 80 8138611571
40 4 1/2 x 80 8138611571 200 12 7/8 x 170 8138614091 40 4 1/2 x 80 8138611571
50 4 5/8 x 90 8138612711 250 16 1 x 190 8138614771 50 4 5/8 x 100 8138612731
80 4 5/8 x 100 8138612731 300 16 1 1/8 x 210 8138615381 80 4 5/8 x 110 8138612741
100 8 5/8 x 100 8138612731 350 20 1 1/8 x 220 8138615401 100 8 5/8 x 110 8138612741
150 8 3/4 x 110 8138613301 400 20 1 1/4 x 230 8138615981 150 8 3/4 x 120 8138613321
200 8 3/4 x 110 8138613301 450 24 1 1/4 x 250 8138615861 200 8 3/4 x 130 8138613341
250 12 7/8 x 120 8138614011 500 24 1 1/4 x 260 8138616031 250 12 7/8 x 140 8138614041
300 12 7/8 x 120 8138614011 600 24 1 1/2 x 290 8138617121 300 12 7/8 x 150 8138614061
350 12 1 x 140 8138614691 350 12 1 x 170 8138614741
400 16 1 x 140 8138614691 Std boltset monoflg. ball 400 16 1 x 170 8138614741
450 16 1 1/8 x 150 8138615291 DN nr inch x mm MESC number 450 16 1 1/8 x 180 8138615331
500 20 1 1/8 x 160 8138615301 15 4 1/2 x 80 8138611571 500 20 1 1/8 x 200 8138615251
600 20 1 1/4 x 180 8138615901 20 4 1/2 x 70 8138611551 600 20 1 1/4 x 220 8138615971
750 28 1 1/4 x 240 8138616001 750 28 1 1/4 x 290 8138616081
900 32 1 1/2 x 290 8138617121 Std boltset monoflg.sliml 900 32 1 1/2 x 340 8138617021
1050 36 1 1/2 x 300 8138616961 DN nr inch x mm MESC number 1050 36 1 1/2 x 360 8138617131
1200 44 1 1/2 x 330 8138617171 15 4 1/2 x 100 8138611611 1200 44 1 1/2 x 390 8138617151
20 4 1/2 x 100 8138611611
Coated boltset mrun flg
DN nr inch x mm MESC number
15 4 5/8 x 130 8138150831
20 4 5/8 x 130 8138150831
25 4 5/8 x 130 8138150831
40 4 3/4 x 140 8138151491

This document has been supplied under license by Shell to: Metric units
UOP Honeywell [email protected] 24/01/2018 01:56:49
 DEP 31.38.01.15-Gen Class 11412, rev. H Page 13 of 15

ASSEMBLIES PI.conn.monofl.sliml DN 20 Fig.AB DN20 - 40

Branch: according to branch table
Drain or vent point DN 15 Fig.I DN15 - 15 Orif conn.monof.ball DN 15 Fig.AB DN50 - 600 Welding neck flange 1 7662783541
Branch: according to branch table Branch: not applicable Gasket spiral wound 1 8541363061
Blind flange 1 7662110581 Welding neck flange 2 7662783521 Monofl Slimline SBB G 1/2 TubF 1 7785599201
Welding neck flange 1 7662783521 Gasket spiral wound 2 8541363041 Studbolt with nuts 4 8138611611
Gasket spiral wound 1 8541363041 Monofl ball SBB G 1/2 Tub F 2 7785588701
Studbolt with nuts 4 8138611531 Studbolt with nuts 8 8138611571 Temp instr conn DN 40 Fig.NS DN80 - 100
Branch: branch nipple flanged
Drain or vent point DN 20 Fig.H DN50 - 50 Orif conn.monof.slim DN 15 Fig.AB DN50 - 600 Lap joint flange 1 7662202181
Branch: branch nipple flanged Branch: not applicable Gasket spiral wound 1 8541363121
Blind flange 1 7662110621 Welding neck flange 2 7662783521 Thermowell flgd DN 40 L=230 mm 1 7683375111
Gasket spiral wound 1 8541363061 Gasket spiral wound 2 8541363041 Studbolt with nuts 4 8138611591
Studbolt with nuts 4 8138611551 Monofl Slimline SBB G 1/2 TubF 2 7785598701
Studbolt with nuts 8 8138611611 Temp instr conn DN 40 Fig.NL DN150 - 1200
Drain or vent point DN 20 Fig.I DN20 - 40 Branch: branch nipple flanged
Branch: according to branch table PI.conn.monofl.ball. DN 15 Fig.AB DN15 - 15 Lap joint flange 1 7662202181
Blind flange 1 7662110621 Branch: according to branch table Gasket spiral wound 1 8541363121
Welding neck flange 1 7662783541 Welding neck flange 1 7662783521 Thermowell flgd DN 40 L=255 mm 1 7683375121
Gasket spiral wound 1 8541363061 Gasket spiral wound 1 8541363041 Studbolt with nuts 4 8138611591
Studbolt with nuts 4 8138611551 Monofl ball SBB G 1/2 Tub F 1 7785588701
Studbolt with nuts 4 8138611571
Drain or vent point DN 25 Fig.H DN80 - 300
Branch: branch nipple flanged PI.conn.monofl.ball. DN 20 Fig.AB DN20 - 40
Blind flange 1 7662110661 Branch: according to branch table
Gasket spiral wound 1 8541363081 Welding neck flange 1 7662783541
Studbolt with nuts 4 8138611551 Gasket spiral wound 1 8541363061
Monofl ball SBB G 1/2 Tub F 1 7785589201
Drain or vent point DN 40 Fig.H DN350 - 1200 Studbolt with nuts 4 8138611551
Branch: branch nipple flanged
Blind flange 1 7662110681 PI.conn.monofl.ball. DN 20 Fig.AA DN50 - 1200
Gasket spiral wound 1 8541363121 Branch: branch nipple flanged
Studbolt with nuts 4 8138611571 Gasket spiral wound 1 8541363061
Monofl ball SBB G 1/2 Tub F 1 7785589201
Mrun conn.monof.ball DN 15 Fig.AA DN15 - 40 Studbolt with nuts 4 8138611551
Branch: not applicable
Gasket spiral wound 2 8541363041 PI.conn.monofl.sliml DN 15 Fig.AB DN15 - 15
Monofl ball SBB G 1/2 Tub F 2 7785588701 Branch: according to branch table
Studbolt with nuts 8 8138611571 Welding neck flange 1 7662783521
Gasket spiral wound 1 8541363041
Mrun conn.monof.slim DN 15 Fig.AA DN15 - 40 Monofl Slimline SBB G 1/2 TubF 1 7785598701
Branch: not applicable Studbolt with nuts 4 8138611611
Gasket spiral wound 2 8541363041
Monofl Slimline SBB G 1/2 TubF 2 7785598701 PI.conn.monofl.sliml DN 20 Fig.AA DN50 - 1200
Studbolt with nuts 8 8138611611 Branch: branch nipple flanged
Gasket spiral wound 1 8541363061
Monofl Slimline SBB G 1/2 TubF 1 7785599201
Studbolt with nuts 4 8138611611

This document has been supplied under license by Shell to: Metric units
UOP Honeywell [email protected] 24/01/2018 01:56:49
 DEP 31.38.01.15-Gen Class 11412, rev. H Page 14 of 15

ALTERNATIVE COMPONENT MATERIAL DESCRIPTION (SOCKET WELDED) ALTERNATIVE PIPING COMPONENTS (SOCKET WELDED)
(For full material description see relevant MESC buying description.) Nominal pipe size
15 20 25 40 50 80 100 150
Flanges Item description MESC

FLWS Flange sw DN 15-50 ASTM A105 Flanges

Fittings Flange sw 766270 2011 2021 2031 2041 1051

CAS3 Cap sw cl 3000 DN 15-50 ASTM A105 Fittings

COS3 Coupling sw cl 3000 DN 15-50 ASTM A105
E4S3 Elbow 45 deg sw cl 3000 DN 15-50 ASTM A105 Cap sw cl 3000 763422 0081 0121 0161 0181 0201
E9S3 Elbow 90 deg sw cl 3000 DN 15-50 ASTM A105 Coupling sw cl 3000 763426 0081 0121 0161 0181 0201
TES3 Tee equal sw cl 3000 DN 15-50 ASTM A105 Elbow 45 deg sw cl 3000 763435 0081 0121 0161 0181 0201
UNS3 Union sw cl 3000 DN 15-50 ASTM A105 Elbow 90 deg sw cl 3000 763435 5081 5121 5161 5181 5201
Tee equal sw cl 3000 763480 0081 0121 0161 0181 0201
Reducing fittings Union sw cl 3000 763485 0081 0121 0161 0181 0201

B3ST Bosset sw x thrd DN 40-1200 ASTM A105 Valves

BR3S Branch outlet sw DN 40-1200 ASTM A105
CRS3 Coupling reducing sw cl 3000 DN 20-50 ASTM A105 Check valve sw 771107 1531 1541 1551 1571 1581
IRS3 Insert reducing sw cl 3000 DN 20-50 ASTM A105 Gate valve sw 772107 1531 1541 1551 1571 1581
SCBP Swage concentric bw x plain DN 80-100 ASTM A234-WPB Gate valve sw x thrd 772170 1531 1541 1551 1571 1581
SEBP Swage eccentric bw x plain DN 80-100 ASTM A234-WPB Globe valve sw 773107 1531 1541 1551 1571 1581
TRS3 Tee reducing sw cl 3000 DN 20-50 ASTM A105 Globe valve sw x thrd 773170 1531 1541 1551 1571 1581

Valves Miscellaneous

CHVS Check valve sw DN 15-50 Body: ASTM A105 Plug Bosset sw x thrd 768066 8081 8121 8161 8181 8201
Trim: AISI 410
GAST Gate valve sw x thrd DN 15-50 Body: ASTM A105 (Normalised) Trim: AISI
410/ Stellite 6
GAVS Gate valve sw DN 15-50 Body: ASTM A105 (Normalised) Trim: AISI
410/ Stellite 6
GLST Globe valve sw x thrd DN 15-50 Body: ASTM A105 (Normalised) Trim: AISI
410/ Stellite 6
GLVS Globe valve sw DN 15-50 Body: ASTM A105 (Normalised) Trim: AISI
410/ Stellite 6

Miscellaneous

BPST Plug Bosset sw x thrd DN 15-50 ASTM A105

This document has been supplied under license by Shell to: Metric units
UOP Honeywell [email protected] 24/01/2018 01:56:49
 DEP 31.38.01.15-Gen Class 11412, rev. H Page 15 of 15

Branch Run pipe B3ST BR3S

15 40 - 40 7680661021 7673100021
15 50 - 50 7680661041 7673100041
15 80 - 200 7680661061 7673100061
15 250 - 900 7680661081 7673100081
15 1050 - 1200 7680661101 7673100101
20 50 - 50 7680661121 7673100121
20 80 - 100 7680661141 7673100141
20 150 - 300 7680661161 7673100161
20 350 - 900 7680661181 7673100181
20 1050 - 1200 7680661201 7673100201
25 80 - 80 7680661221 7673100221
25 100 - 100 7680661241 7673100241
25 150 - 250 7680661261 7673100261
25 300 - 900 7680661281 7673100281
25 1050 - 1200 7680661301 7673100301
40 80 - 80 7680661321 7673100321
40 100 - 100 7680661341 7673100341
40 150 - 150 7680661361 7673100361
40 200 - 300 7680661381 7673100381
40 350 - 600 7680661401 7673100401
40 750 - 900 7680660431 7673101481
40 1050 - 1200 7680661441 7673100441
50 80 - 80 7680661461 7673100461
50 100 - 100 7680661481 7673100481
50 150 - 150 7680661501 7673100501
50 200 - 250 7680661521 7673100521
50 300 - 450 7680661541 7673100541
50 500 - 900 7680661561 7673100561
50 1050 - 1200 7680661581 7673100581
ALTERNATIVE REDUCING/PIPING COMPONENTS (SOCKET WELDED)

Run x Br CRS3 IRS3 SCBP SEBP TRS3

20 x 15 7634270061 7634400061 7634810061
25 x 15 7634270231 7634400231 7634810231
25 x 20 7634270251 7634400251 7634810251
40 x 15 7634270331 7634400331
40 x 20 7634270351 7634400351 7634810351
40 x 25 7634270371 7634400371 7634810371
50 x 15 7634270431 7634400431
50 x 20 7634270451 7634400451
50 x 25 7634270471 7634400471 7634810471
50 x 40 7634270491 7634400491 7634810491
80 x 40 7625601811 7625801811
80 x 50 7625601931 7625801931
100 x 40 7625602281 7625802281
100 x 50 7625602401 7625802401

This document has been supplied under license by Shell to: Metric units
UOP Honeywell [email protected] 24/01/2018 01:56:49