Scribd Logo
Upload

Welcome to Scribd!

  • 2K views

    12.6.1 Packet Tracer - Troubleshooting Challenge - Use Documentation To Solve Issues

    Uploaded by

    alexismoto123
    The document describes a packet tracer activity where the student is tasked with documenting an unknown corporate network. This involves testing connectivity between devices, discovering host and device configurations, accessing default gateway devices, and using the information collected to draw the network topology. The student is also asked to note any issues with how the network adheres to standard practices and provide recommendations.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    12.6.1 Packet Tracer - Troubleshooting Challenge - Use Documentation To Solve Issues

    Uploaded by

    alexismoto123
    2K views3 pages
    The document describes a packet tracer activity where the student is tasked with documenting an unknown corporate network. This involves testing connectivity between devices, discovering host and device configurations, accessing default gateway devices, and using the information collected to draw the network topology. The student is also asked to note any issues with how the network adheres to standard practices and provide recommendations.

    Original Description:

    CPE404- CISCO3

    Original Title

    12.6.1 Packet Tracer - Troubleshooting Challenge - Use Documentation to Solve Issues

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document describes a packet tracer activity where the student is tasked with documenting an unknown corporate network. This involves testing connectivity between devices, discovering host and device configurations, accessing default gateway devices, and using the information collected to draw the network topology. The student is also asked to note any issues with how the network adheres to standard practices and provide recommendations.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    2K views3 pages

    12.6.1 Packet Tracer - Troubleshooting Challenge - Use Documentation To Solve Issues

    Uploaded by

    alexismoto123
    The document describes a packet tracer activity where the student is tasked with documenting an unknown corporate network. This involves testing connectivity between devices, discovering host and device configurations, accessing default gateway devices, and using the information collected to draw the network topology. The student is also asked to note any issues with how the network adheres to standard practices and provide recommendations.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    You are on page 1of 3
    At a glance
    Powered by AI
    The addressing table provides interface, IP address, subnet mask and default gateway information for devices on the network. The objectives are to test connectivity, compile host information, access gateway devices and document the network topology.

    The addressing table provides information such as the device name, interface, device type, IP address, subnet mask and default gateway for each device discovered on the network.

    The steps to reconstruct the network topology involve accessing routing tables on gateway devices, using discovery protocols to document non-gateway devices, accessing device configurations, viewing neighbor information and connecting to other devices to gather configuration details.

    Packet Tracer - Troubleshooting Challenge - Use Documentation

    to Solve Issues
    Addressing Table

    Device Type
    Device Interface (router, switch, IP Address Subnet Mask Default Gateway
    host)

    PC1 NIC HOST 192.168.1.153 255.255.255.0 192.168.1.1


    PC2 NIC HOST 192.168.3.50 255.255.255.0 192.168.3.1
    PC3 NIC HOST 192.168.4.115 255.255.255.0 192.168.4.1
    PC4 NIC HOST 192.168.5.83 255.255.255.128 192.168.5.1
    PC5 NIC HOST 192.168.5.227 255.255.255.128 192.168.5.129
    PC6 NIC HOST 192.168.2.48 255.255.255.224 192.168.2.33
    PC7 NIC HOST 192.168.2.67 255.255.255.224 192.168.2.65
    HUB G0/0/0 ROUTER 192.0.2.1 255.255.255.252 N/A

    S0/1/0 192.168.0.1 255.255.255.252 N/A

    S0/1/1 192.168.0.5 255.255.255.252 N/A

    S0/2/0 192.168.0.9 255.255.255.252 N/A

    S0/2/1 192.168.0.13 255.255.255.252 N/A

    BRANCH-1 G0/0/0 ROUTER 192.168.1.1 255.255.255.0 N/A


    S0/1/0 192.168.0.2 255.255.255.252 N/A

    BRANCH-2 G0/0/0 ROUTER 192.168.2.33 255.255.255.224 N/A


    S0/1/0 192.168.0.6 255.255.255.252 N/A

    Factory G0/0/0 ROUTER 192.168.3.1 255.255.255.0 N/A


    G0/0/1 192.168.4.1 255.255.255.0 N/A
    S0/1/0 192.168.0.14 255.255.255.252 N/A

    HQ G0/0/0.1 ROUTER 192.168.6.1 255.255.255.0 N/A


    G0/0/0.5 192.168.5.1 255.255.255.128 N/A
    G0/0/0.10 192.168.5.128 255.255.255.128 N/A
    S0/1/0 192.168.0.10 255.255.255.252 N/A

    SW-B1 VLAN1 SWITCH 192.168.1.252 255.255.255.0 192.168.1.1


    SW-B2 VLAN1 SWITCH 192.168.2.62 255.255.255.0 192.168.2.1

     2016 - 2019 Cisco and/or its affiliates. All rights reserved. Cisco Public Page 1 of 3 www.netacad.com
    Packet Tracer - Troubleshooting Challenge - Use Documentation to Solve Issues

    Device Type
    Device Interface (router, switch, IP Address Subnet Mask Default Gateway
    host)

    SW-F1 VLAN1 SWITCH 192.168.3.252 255.255.255.0 192.168.3.1


    SW-F2 VLAN1 SWITCH 192.168.4.252 255.255.255.0 192.168.4.1
    SW-HQ1 VLAN1 SWITCH 192.168.6.252 255.255.255.0 192.168.6.1
    SW-HQ2 VLAN1 SWITCH 192.168.6.253 255.255.255.0 192.168.6.1
    SW-HQ3 VLAN1 SWITCH 192.168.6.254 255.255.255.0 192.168.6.1

    Objectives
    In this lab, you will document a network that is unknown to you.
    ·         Test network connectivity.
    ·         Compile host addressing information.
    ·         Remotely access default gateway devices.
    ·         Document default gateway device configurations.
    ·         Discover devices on the network.
    ·         Draw the network topology.

    Background / Scenario
    Your employer has been hired to take over the administration of a corporate network because the previous
    network administrator has left the company. The network documentation is missing and needs to be
    recreated. You job is to document the hosts and network devices including all the device addressing and
    logical interconnections. You will remotely access network devices and use network discovery to complete a
    device table and draw the network topology.
    This is Part I of a two-part series of activities. You will use the documentation that you create in this activity to
    guide you as you troubleshoot the network in Part II, Packet Tracer - Troubleshooting Challenge - Using
    Documentation to Solve Issues.
    As you investigate and document the network topology, make note of issues that you discover that do not
    adhere to the practices taught in the CCNA curriculum.

    Instructions
    Part 1: Part 1: Test Connectivity
    Ping between the PCs and the internet server to test the network. All PCs should be able to ping one another
    and the internet server.

    Part 2: Part 2: Discover PC Configuration Information


    Go to the command prompt of each PC and display the IP settings. Record this information in the
    documentation table.

    Part 3: Part 3: Discover Information about the Default Gateway Devices

     2016 - 2019 Cisco and/or its affiliates. All rights reserved. Cisco Public Page 2 of 3 www.netacad.com
    Packet Tracer - Troubleshooting Challenge - Use Documentation to Solve Issues

    Connect to each default gateway device using the Telnet protocol and record information about the interfaces
    that are in use in the table. The VTY password is cisco and privileged EXEC password is class.
    C:\> telnet IP_address

    Part 4: Part 4: Reconstruct the Network Topology


    In this part of the activity, you will continue recording information about the devices in the network in the
    Addressing Table. In addition, you will start to diagram the network topology based on what you can discover
    about the device interconnections.

    Step 1: Step 1: Access Routing Tables on Each Gateway Device.


    Use the routing tables in each router to learn more about the network. Make notes of your findings.

    Step 2: Step 2: Discover Non-Gateway Devices.


    Use a network discovery protocol to document neighboring devices. Record your findings in the addressing
    table. At this point you should also be able to begin documenting device interconnections.

    Part 5: Part 5: Further Explore Device Configurations and Interconnections


    Step 1: Step 1: Access Device Configurations.
    Connect to the other devices in the network. Gather information about the device configurations.

    Step 2: Step 2: View Neighbor Information.


    Use discovery protocols to increase your knowledge of the network devices and topologies.

    Step 3: Step 3: Connect to Other Devices.


    Display configuration information for the other devices on the network. Record your findings in the device
    table.
    By now you should know about all the devices and interface configurations in the network. All rows of the
    table should contain device information. Use your information to reconstruct as much of the network topology
    as you can.

    Reflection
    You may have noticed that some of the practices used to configure the network devices are out-of-date,
    inefficient, or not secure. Make a list of as many recommendations that you have regarding how the devices
    should be reconfigured to follow the practices that you have learned in the CCNA curriculum

     2016 - 2019 Cisco and/or its affiliates. All rights reserved. Cisco Public Page 3 of 3 www.netacad.com

    You might also like