=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2021.02.

17 16:05:25 =~=~=~=~=~=~=~=~=~=~=~=

System Bootstrap, Version 15.0(1r)M15, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2011 by cisco Systems, Inc.

Total memory size = 512 MB

CISCO1921/K9 platform with 524288 Kbytes of main memory
Main memory is configured to 64 bit mode with ECC disabled

Readonly ROMMON initialized

program load complete, entry point: 0x80903000, size: 0x4c4a0
program load complete, entry point: 0x80903000, size: 0x4c4a0

IOS Image Load Test

___________________
Digitally Signed Release Software
program load complete, entry point: 0x81000000, size: 0x34890b0
Self decompressing the image :
###################################################################################
###################################################################################
###################################################################################
##################################################################### [OK]

Smart Init is enabled

smart init is sizing iomem
TYPE MEMORY_REQ
HWIC Slot 0 0x00200000
Onboard devices &
buffer pools 0x01E8F000
-----------------------------------------------
TOTAL: 0x0208F000

Rounded IOMEM up to: 36Mb.

Using 7 percent iomem. [36Mb/512Mb]

Restricted Rights Legend

Use, duplication, or disclosure by the Government is

subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

cisco Systems, Inc.

170 West Tasman Drive
San Jose, California 95134-1706

Cisco IOS Software, C1900 Software (C1900-UNIVERSALK9-M), Version 15.1(4)M4,

RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Tue 20-Mar-12 17:58 by prod_rel_team
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to

[email protected].

Cisco CISCO1921/K9 (revision 1.0) with 487424K/36864K bytes of memory.

Processor board ID FGL16242511
2 Gigabit Ethernet interfaces
1 terminal line
DRAM configuration is 64 bits wide with parity disabled.
255K bytes of non-volatile configuration memory.
249840K bytes of USB Flash usbflash0 (Read/Write)

--- System Configuration Dialog ---

Would you like to enter the initial configuration dialog? [yes/no]: no#

Press RETURN to get started!

Jan 2 12:00:02.763: %IOS_LICENSE_IMAGE_APPLICATION-6-LICENSE_LEVEL: Module name =

c1900 Next reboot level = ipbasek9 and License = ipbasek9
Jan 2 12:00:02.959: %IOS_LICENSE_IMAGE_APPLICATION-6-LICENSE_LEVEL: Module name =
c1900 Next reboot level = datak9 and License = datak9
Feb 17 10:04:49.323: %ESWMRVL_FLTMG-5-NOTICE: Notice: FPGA Rev 0xFF
hwic_fe_mrvl_reg_read: SMI is busy

Feb 17 10:04:49.339: fe_mrvl_hw_init : Could not load driver

Feb 17 10:04:49.339: %ESWMRVL_FLTMG-7-INTERNAL_ERR: Inte

Router>
Router>
Router>
Router>rnal error: Unable to intialize the Marvell switch for FE

-Traceback= 211BB884z 21390B54z 21391E34z 2136F818z 210F2FB8z 21372BECz 236EB2F8z

236EB3E0z 223126C0z 223129A4z 23682E48z 23682E2Czhwic_fe_analyze_interface:
Couldn't initialize the HWIC FE

Feb 17 10:04:53.683: %LINK-3-UPDOWN: Interface GigabitEthernet0/0, changed state to

down
Feb 17 10:04:53.683: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed state to
down
Feb 17 10:04:54.683: %LINEPROTO-5-UPDOWN: Line protocol on Interface
GigabitEthernet0/0, changed state to down
Feb 17 10:04:54.683: %LINEPROTO-5-UPDOWN: Line protocol on Interface
GigabitEthernet0/1, changed state to down
Feb 17 10:04:59.527: %USBFLASH-5-CHANGE: usbflash0 has been inserted!
Feb 17 10:05:01.511: %SYS-6-STARTUP_CONFIG_IGNORED: System startup configuration is
ignored based on the configuration register setting.
Feb 17 10:05:16.647: %LINK-5-CHANGED: Interface Embedded-Service-Engine0/0, changed
state to administratively down
Feb 17 10:05:16.647: %LINK-5-CHANGED: Interface GigabitEthernet0/0, changed state
to administratively down
Feb 17 10:05:16.647: %LINK-5-CHANGED: Interface GigabitEthernet0/1, changed state
to administratively down
Feb 17 10:05:17.675: %LINEPROTO-5-UPDOWN: Line protocol on Interface Embedded-
Service-Engine0/0, changed state to down
Feb 17 10:05:18.715: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C1900 Software (C1900-UNIVERSALK9-M), Version 15.1(4)M4,
RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Tue 20-Mar-12 17:58 by prod_rel_team
Feb 17 10:05:18.719: %SNMP-5-COLDSTART: SNMP agent on host Router is undergoing a
cold start#
System Bootstrap, Version 15.0(1r)M9, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2010 by cisco Systems, Inc.

Total memory size = 256 MB

CISCO1905/K9 platform with 262144 Kbytes of main memory
Main memory is configured to 64 bit mode with ECC disabled

Readonly ROMMON initialized

program load complete, entry point: 0x80903000, size: 0x4c4a0
program load complete, entry point: 0x80903000, size: 0x4c4a0

IOS Image Load Test

___________________
Digitally Signed Release Software
program load complete, entry point: 0x81000000, size: 0x2fd9050
Self decompressing the image :
###################################################################################
###################################################################################
###################################################################################
######################################## [OK]
#
System Bootstrap, Version 15.0(1r)M9, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2010 by cisco Systems, Inc.

Total memory size = 256 MB

CISCO1905/K9 platform with 262144 Kbytes of main memory
Main memory is configured to 64 bit mode with ECC disabled

Readonly ROMMON initialized

program load complete, entry point: 0x80903000, size: 0x4c4a0
program load complete, entry point: 0x80903000, size: 0x4c4a0

IOS Image Load Test

___________________
Digitally Signed Release Software
program load complete, entry point: 0x81000000, size: 0x2fd9050
Self decompressing the image :
###################################################################################
###################################################################################
###################################################################################
######################################## [OK]

Smart Init is enabled

smart init is sizing iomem
TYPE MEMORY_REQ
HWIC Slot 0 0x00200000
Onboard devices &
buffer pools 0x01E8F000
-----------------------------------------------
TOTAL: 0x0208F000

Rounded IOMEM up to: 36Mb.

Using 14 percent iomem. [36Mb/256Mb]

Restricted Rights Legend

Use, duplication, or disclosure by the Government is

subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

cisco Systems, Inc.

170 West Tasman Drive
San Jose, California 95134-1706

Cisco IOS Software, C1900 Software (C1900-UNIVERSALK9-M), Version 15.1(3)T1,

RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Sun 27-Mar-11 05:55 by prod_rel_team

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to

[email protected].

Cisco CISCO1905/K9 (revision 1.0) with 225280K/36864K bytes of memory.

Processor board ID FGL153122SA
2 Gigabit Ethernet interfaces
DRAM configuration is 64 bits wide with parity disabled.
255K bytes of non-volatile configuration memory.
250864K bytes of USB Flash usbflash0 (Read/Write)

--- System Configuration Dialog ---

Would you like to enter the initial configuration dialog? [yes/no]: no#�#
System Bootstrap, Version 15.0(1r)M15, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2011 by cisco Systems, Inc.

Total memory size = 512 MB

CISCO1921/K9 platform with 524288 Kbytes of main memory
Main memory is configured to 64 bit mode with ECC disabled

Readonly ROMMON initialized

program load complete, entry point: 0x80903000, size: 0x4c4a0
program load complete, entry point: 0x80903000, size: 0x4c4a0

IOS Image Load Test

___________________
Digitally Signed Release Software
program load complete, entry point: 0x81000000, size: 0x34890b0
Self decompressing the image :
###################################################################################
###################################################################################
###################################################################################
##################################################################### [OK]

Smart Init is enabled

smart init is sizing iomem
TYPE MEMORY_REQ
HWIC Slot 0 0x00200000
Onboard devices &
buffer pools 0x01E8F000
-----------------------------------------------
TOTAL: 0x0208F000

Rounded IOMEM up to: 36Mb.

Using 7 percent iomem. [36Mb/512Mb]

Restricted Rights Legend

Use, duplication, or disclosure by the Government is

subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

cisco Systems, Inc.

170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, C1900 Software (C1900-UNIVERSALK9-M), Version 15.1(4)M4,
RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Tue 20-Mar-12 17:58 by prod_rel_team

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to

[email protected].

Cisco CISCO1921/K9 (revision 1.0) with 487424K/36864K bytes of memory.

Processor board ID FGL162224C0
2 FastEthernet interfaces
2 Gigabit Ethernet interfaces
1 terminal line
DRAM configuration is 64 bits wide with parity disabled.
255K bytes of non-volatile configuration memory.
249840K bytes of USB Flash usbflash0 (Read/Write)

--- System Configuration Dialog ---

Would you like to enter the initial configuration dialog? [yes/no]: #�

System Bootstrap, Version 15.0(1r)M15, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2011 by cisco Systems, Inc.

Total memory size = 512 MB

CISCO1921/K9 platform with 524288 Kbytes of main memory
Main memory is configured to 64 bit mode with ECC disabled

Readonly ROMMON initialized

program load complete, entry point: 0x80903000, size: 0x4c4a0
program load complete, entry point: 0x80903000, size: 0x4c4a0

IOS Image Load Test

___________________
Digitally Signed Release Software
program load complete, entry point: 0x81000000, size: 0x34890b0
Self decompressing the image :
###################################################################################
###################################################################################
###################################################################################
##################################################################### [OK]

Smart Init is disabled. IOMEM set to: 25

Using iomem percentage: 25

Configured iomem percentage is not available.
Actual iomem percentage used: 21

Restricted Rights Legend

Use, duplication, or disclosure by the Government is

subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

cisco Systems, Inc.

170 West Tasman Drive
San Jose, California 95134-1706

Cisco IOS Software, C1900 Software (C1900-UNIVERSALK9-M), Version 15.1(4)M4,

RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Tue 20-Mar-12 17:58 by prod_rel_team

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to

[email protected].

Cisco CISCO1921/K9 (revision 1.0) with 409600K/114688K bytes of memory.

Processor board ID FGL162224BJ
4 FastEthernet interfaces
2 Gigabit Ethernet interfaces
1 terminal line
DRAM configuration is 64 bits wide with parity disabled.
255K bytes of non-volatile configuration memory.
249840K bytes of USB Flash usbflash0 (Read/Write)

SETUP: new interface FastEthernet0/1/0 placed in "shutdown" state

SETUP: new interface FastEthernet0/1/1 placed in "shutdown" state#

Press RETURN to get started!

Jan 2 12:00:02.771: %IOS_LICENSE_IMAGE_APPLICATION-6-LICENSE_LEVEL: Module name =
c1900 Next reboot level = ipbasek9 and License = ipbasek9
Jan 2 12:00:02.967: %IOS_LICENSE_IMAGE_APPLICATION-6-LICENSE_LEVEL: Module name =
c1900 Next reboot level = datak9 and License = datak9
Feb 17 10:30:15.483: %ESWMRVL_FLTMG-5-NOTICE: Notice: FPGA Rev 0x27

Feb 17 10:30:16.711: %ESWMRVL_FLTMG-5-NOTICE: Notice: FPGA Rev 0x27

Feb 17 10:30:21.091: %LINK-3-UPDOWN: Interface GigabitEthernet0/0, changed state to

d
Router>own
Feb 17 10:30:21.091: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed state to
down
Feb 17 10:30:22.091: %LINEPROTO-5-UPDOWN: Line protocol on Interface
GigabitEthernet0/0, changed state to down
Feb 17 10:30:22.091: %LINEPROTO-5-UPDOWN: Line protocol on Interface
GigabitEthernet0/1, changed state to down
Feb 17 10:30:22.091: %LINEPROTO-5-UPDOWN: Line protocol on Interface
FastEthernet0/0/0, changed state to down
Feb 17 10:30:22.091: %LINEPROTO-5-UPDOWN: Line protocol on Interface
FastEthernet0/0/1, changed state to down
Feb 17 10:30:22.091: %LINEPROTO-5-UPDOWN: Line protocol on Interface
FastEthernet0/1/0, changed state to down
Feb 17 10:30:22.091: %LINEPROTO-5-UPDOWN: Line protocol on Interface
FastEthernet0/1/1, changed state to down
Feb 17 10:30:26.935: %USBFLASH-5-CHANGE: usbflash0 has been inserted!
Feb 17 10:30:29.227: %SYS-5-CONFIG_I: Configured from memory by console
Feb 17 10:30:31.191: %LINK-5-CHANGED: Interface Embedded-Service-Engine0/0, changed
state to administratively down
Feb 17 10:30:31.239: %LINK-5-CHANGED: Interface FastEthernet0/1/0, changed state to
administratively down
Feb 17 10:30:31.343: %LINK-5-CHANGED: Interface FastEthernet0/1/1, changed state to
administratively down
Feb 17 10:30:32.239: %LINEPROTO-5-UPDOWN: Line protocol on Interface Embedded-
Service-Engine0/0, changed state to down
Feb 17 10:30:33.751: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C1900 Software (C1900-UNIVERSALK9-M), Version 15.1(4)M4,
RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Tue 20-Mar-12 17:58 by prod_rel_team
Feb 17 10:30:33.751: %SNMP-5-COLDSTART: SNMP agent on host Router is undergoing a
cold start
Router>
Router>
Router>
Router>en
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#int
FastEthernet0/1/0#################rFastEthernet0/1/0#################aFastEthernet0
/1/0#################nFastEthernet0/1/0#################gFastEthernet0/1/0#########
########eFastEthernet0/1/0#################
FastEthernet0/1/0##################~FastEthernet0/1/0##################FastEthernet
0/1/0 ##################FastEthernet0/1/0########-3
^
% Invalid input detected at '^' marker.
Router(config)#int range FastEthernet0/1/0-3# #
Feb 17 10:31:07.907: %LINEPROTO-5-UPDOWN: Line protocol on Interface
FastEthernet0/0/0, changed state to up
Feb 17 10:31:07.907: %LINEPROTO-5-UPDOWN: Line protocol on Interface
FastEthernet0/0/1, changed state to up#
Router(config)#int range FastEthernet0/1/0-#
Router(config)#int range FastEthernet0/1/0-#
Router(config)#int range FastEthernet0/1/0-?
-

Router(config)#int range FastEthernet0/1/0-# #?

. : <0-1>

Router(config)#int range FastEthernet0/1/0

Feb 17 10:31:20.919: %LINEPROTO-5-UPDOWN: Line protocol on Interface
FastEthernet0/0/0, changed state to down
Feb 17 10:31:20.919: %LINEPROTO-5-UPDOWN: Line protocol on Interface
FastEthernet0/0/1, changed state to down#�
System Bootstrap, Version 15.0(1r)M15, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2011 by cisco Systems, Inc.

Total memory size = 512 MB

CISCO1921/K9 platform with 524288 Kbytes of main memory
Main memory is configured to 64 bit mode with ECC disabled

Readonly ROMMON initialized

program load complete, entry point: 0x80903000, size: 0x4c4a0
program load complete, entry point: 0x80903000, size: 0x4c4a0

IOS Image Load Test

___________________
Digitally Signed Release Software
program load complete, entry point: 0x81000000, size: 0x34890b0
Self decompressing the image :
###################################################################################
###################################################################################
###################################################################################
##################################################################### [OK]

Smart Init is enabled

smart init is sizing iomem
TYPE MEMORY_REQ
HWIC Slot 0 0x00200000
Onboard devices &
buffer pools 0x01E8F000
-----------------------------------------------
TOTAL: 0x0208F000

Rounded IOMEM up to: 36Mb.

Using 7 percent iomem. [36Mb/512Mb]

Restricted Rights Legend

Use, duplication, or disclosure by the Government is

subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

cisco Systems, Inc.

170 West Tasman Drive
San Jose, California 95134-1706

Cisco IOS Software, C1900 Software (C1900-UNIVERSALK9-M), Version 15.1(4)M4,

RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Tue 20-Mar-12 17:58 by prod_rel_team

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to

[email protected].

Cisco CISCO1921/K9 (revision 1.0) with 487424K/36864K bytes of memory.

Processor board ID FGL162224B4
2 FastEthernet interfaces
2 Gigabit Ethernet interfaces
1 terminal line
DRAM configuration is 64 bits wide with parity disabled.
255K bytes of non-volatile configuration memory.
249840K bytes of USB Flash usbflash0 (Read/Write)

--- System Configuration Dialog ---

Would you like to enter the initial configuration dialog? [yes/no]: no#

Press RETURN to get started!

Jan 2 12:00:02.763: %IOS_LICENSE_IMAGE_APPLICATION-6-LICENSE_LEVEL: Module name =

c1900 Next reboot level = ipbasek9 and License = ipbasek9
Jan 2 12:00:02.959: %IOS_LICENSE_IMAGE_APPLICATION-6-LICENSE_LEVEL: Module name =
c1900 Next reboot level = datak9 and License = datak9
Feb 17 10:35:18.299: %ESWMRVL_FLTMG-5-NOTICE: Notice: FPGA Rev 0x27

Feb 17 10:35:22.671: %LINK-3-UPDOWN: Interface GigabitEthernet0/0, changed state to

down
Feb 17 10:35:22.671: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed state to
down
Feb 17 10:35:23.671: %LINEPROTO-5-UPDOWN: Line protocol on Interface
GigabitEthernet0/0, changed state to down
Feb 17 10:35:23.671: %LINEPROTO-5-UPDOWN: Line protocol on Interface
GigabitEthernet0/1, changed state to down
Feb 17 10:35:23.671: %LINEPROTO-5-UPDOWN: Line protocol on Interface
FastEthernet0/0/0, changed state to down
Feb 17 10:35:23.671: %LINEPROTO-5-UPDOWN: Line protocol on Interface
FastEthernet0/0/1, changed state to down
Feb 17 10:35:28.515: %USBFLASH-5-CHANGE: usbflash0 has been inserted!
Feb 17 10:35:30.527: %SYS-6-STARTUP_CONFIG_IGNORED: System startup configuration is
ignored based on the configuration register setting.
Feb 17 10:35:37.595: %LINK-5-CHANGED: Interface Embedded-Service-Engine0/0, changed
state to administratively down
Feb 17 10:35:37.595: %LINK-5-CHANGED: Interface GigabitEthernet0/0, changed state
to administratively down
Feb 17 10:35:37.595: %LINK-5-CHANGED: Interface GigabitEthernet0/1, changed state
to administratively down
Feb 17 10:35:37.595: %LINK-5-CHANGED: Interface FastEthernet0/0/0, changed state to
administratively down
Feb 17 10:35:37.595: %LINK-5-CHANGED: Interface FastEthernet0/0/1, changed state to
administratively down
Feb 17 10:35:38.643: %LINEPROTO-5-UPDOWN: Line protocol on Interface Embedded-
Service-Engine0/0, changed state to down
Feb 17 10:35:39.859: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C1900 Software (C1900-UNIVERSALK9-M), Version 15.1(4)M4,
RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Tue 20-Mar-12 17:58 by prod_rel_team
Feb 17 10:35:39.859: %SNMP-5-COLDSTART: SNMP agent on host Router is undergoing a
cold start
Router>
Router>
Router>en
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#int range FastEthernet0/1/0-1
^
% Invalid input detected at '^' marker.

Router(config)#int range FastEthernet0/1/0-1# ## ## ## ## ##

Router(config)#int range FastEthernet0/#
Router(config)#int range FastEthernet0/?
<0-0> FastEthernet interface number

Router(config)#int range FastEthernet0/0/-# #0-1

Router(config-if-range)#not # ## # shut
Router(config-if-range)#
Feb 17 10:36:15.895: %LINK-3-UPDOWN: Interface FastEthernet0/0/0, changed state to
up
Feb 17 10:36:15.895: %LINK-3-UPDOWN: Interface FastEthernet0/0/1, changed state to
upend
Feb 17 10:36:19.107: %LINEPROTO-5-UPDOWN: Line protocol on Interface
FastEthernet0/0/1, changed state to up
Feb 17 10:36:19.107: %LINEPROTO-5-UPDOWN: Line protocol on Interface
FastEthernet0/0/0, changed state to up
Router#
Router#wr
Feb 17 10:36:20.531: %SYS-5-CONFIG_I: Configured from console by console
Building configuration...
[OK]
Router#wr
Feb 17 10:36:24.827: %LINEPROTO-5-UPDOWN: Line protocol on Interface
FastEthernet0/0/0, changed state to down
Feb 17 10:36:24.827: %LINEPROTO-5-UPDOWN: Line protocol on Interface
FastEthernet0/0/1, changed state to down
Building configuration...
[OK]
Router#
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#int gi
Router(config)#int gigabitEthernet ?
<0-2> GigabitEthernet interface number

Router(config)#int gigabitEthernet 0/0?

. / : <0-1>

Router(config)#int gigabitEthernet 0/0-1

^
% Invalid input detected at '^' marker.

Router(config)#int gigabitEthernet 0/0-1# ## ## ##

Router(config)#int gigabitEthernet 0/################### gigabitEthernet
0/###################r gigabitEthernet 0/###################a gigabitEthernet
0/###################n gigabitEthernet 0/###################g gigabitEthernet
0/###################e gigabitEthernet 0/################### gigabitEthernet
0/#######0-1
Router(config-if-range)#no shut
Router(config-if-range)#end
Router#wr
Building configuration...

Feb 17 10:36:58.179: %SYS-5-CONFIG_I: Configured from console by console

Feb 17 10:36:59.131: %LINK-3-UPDOWN: Interface GigabitEthernet0/0, changed state to
down
Feb 17 10:36:59.183: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed state to
down[OK]
Router#
Feb 17 10:37:01.719: %LINK-3-UPDOWN: Interface GigabitEthernet0/0, changed state to
up
Feb 17 10:37:02.075: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed state to
up
Feb 17 10:37:02.719: %LINEPROTO-5-UPDOWN: Line protocol on Interface
GigabitEthernet0/0, changed state to up
Feb 17 10:37:03.075: %LINEPROTO-5-UPDOWN: Line protocol on Interface
GigabitEthernet0/1, changed state to up
System Bootstrap, Version 15.0(1r)M16, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2012 by cisco Systems, Inc.

Total memory size = 512 MB

CISCO1921/K9 platform with 524288 Kbytes of main memory
Main memory is configured to 64 bit mode with ECC disabled
Readonly ROMMON initialized
program load complete, entry point: 0x80903000, size: 0x4c4a0
program load complete, entry point: 0x80903000, size: 0x4c4a0

IOS Image Load Test

___________________
Digitally Signed Release Software
program load complete, entry point: 0x81000000, size: 0x41bab28
Self decompressing the image :
###################################################################################
###################################################################################
###################################################################################
###################################################################################
########################################################## [OK]

Smart Init is enabled

smart init is sizing iomem
TYPE MEMORY_REQ
HWIC Slot 0 0x00200000
Onboard devices &
buffer pools 0x01E8F000
-----------------------------------------------
TOTAL: 0x0208F000

Rounded IOMEM up to: 36Mb.

Using 7 percent iomem. [36Mb/512Mb]

Restricted Rights Legend

Use, duplication, or disclosure by the Government is

subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

cisco Systems, Inc.

170 West Tasman Drive
San Jose, California 95134-1706

Cisco IOS Software, C1900 Software (C1900-UNIVERSALK9-M), Version 15.2(4)M5,

RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Fri 13-Sep-13 13:51 by prod_rel_team

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to

[email protected].

Cisco CISCO1921/K9 (revision 1.0) with 487424K/36864K bytes of memory.

Processor board ID FGL180522CZ
2 FastEthernet interfaces
2 Gigabit Ethernet interfaces
1 terminal line
DRAM configuration is 64 bits wide with parity disabled.
255K bytes of non-volatile configuration memory.
249840K bytes of USB Flash usbflash0 (Read/Write)

--- System Configuration Dialog ---

Would you like to enter the initial configuration dialog? [yes/no]:

% Please answer 'yes' or 'no'.
Would you like to enter the initial configuration dialog? [yes/no]: no#

Press RETURN to get started!

*Jan 2 00:00:02.923: %IOS_LICENSE_IMAGE_APPLICATION-6-LICENSE_LEVEL: Module name =

c1900 Next reboot level = ipbasek9 and License = ipbasek9
*Feb 17 09:36:52.131: c3600_scp_set_dstaddr2_idb(184)add = 80 name is Embedded-
Service-Engine0/0
*Feb 17 09:37:01.391: %ESWMRVL_FLTMG-5-NOTICE: Notice: FPGA Rev 0x27

*Feb 17 09:37:08.775: %LINK-3-UPDOWN: Interface GigabitEthernet0/0, changed state

to down
*Feb 17 09:37:08.775: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed state
to down
*Feb 17 09:37
Router>
Router>:09.775: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/0,
changed state to down
*Feb 17 09:37:09.775: %LINEPROTO-5-UPDOWN: Line protocol on Interface
GigabitEthernet0/1, changed state to down
*Feb 17 09:37:09.775: %LINEPROTO-5-UPDOWN: Line protocol on Interface
FastEthernet0/0/0, changed state to up
*Feb 17 09:37:09.775: %LINEPROTO-5-UPDOWN: Line protocol on Interface
FastEthernet0/0/1, changed state to up
*Feb 17 09:37:13.935: %USBFLASH-5-CHANGE: usbflash0 has been inserted!
*Feb 17 09:37:15.947: %SYS-6-STARTUP_CONFIG_IGNORED: System startup configuration
is ignored based on the configuration register setting.
*Feb 17 09:37:20.647: %LINK-5-CHANGED: Interface Embedded-Service-Engine0/0,
changed state to administratively down
*Feb 17 09:37:20.647: %LINK-5-CHANGED: Interface GigabitEthernet0/0, changed state
to administratively down
*Feb 17 09:37:20.647: %LINK-5-CHANGED: Interface GigabitEthernet0/1, changed state
to administratively down
*Feb 17 09:37:20.647: %LINK-5-CHANGED: Interface FastEthernet0/0/0, changed state
to administratively down
*Feb 17 09:37:20.699: %LINK-5-CHANGED: Interface FastEthernet0/0/1, changed state
to administratively down
*Feb 17 09:37:21.663: %LINEPROTO-5-UPDOWN: Line protocol on Interface Embedded-
Service-Engine0/0, changed state to down
*Feb 17 09:37:21.663: %LINEPROTO-5-UPDOWN: Line protocol on Interface
FastEthernet0/0/0, changed state to down
*Feb 17 09:37:21.715: %LINEPROTO-5-UPDOWN: Line protocol on Interface
FastEthernet0/0/1, changed state to down
*Feb 17 09:37:22.095: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C1900 Software (C1900-UNIVERSALK9-M), Version 15.2(4)M5,
RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Fri 13-Sep-13 13:51 by prod_rel_team
*Feb 17 09:37:22.143: %SNMP-5-COLDSTART: SNMP agent on host Router is undergoing a
cold start
Router>
Router>
Router>conf g
Translating "conf"...domain server (255.255.255.255)

% Bad IP address or host name

Translating "conf"...domain server (255.255.255.255)
(255.255.255.255)
% Unknown command or computer name, or unable to find computer address
Router>conf t
^
% Invalid input detected at '^' marker.

Router>en
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#int range FastEthernet0/1/0# ## ## #0/0-1
Router(config-if-range)#no shut
Router(config-if-range)#end
Router#wr
Building configuration...

*Feb 17 09:37:56.159: %SYS-5-CONFIG_I: Configured from console by console

*Feb 17 09:37:57.275: %LINK-3-UPDOWN: Interface FastEthernet0/0/0, changed state to
up
*Feb 17 09:37:57.275: %LINK-3-UPDOWN: Interface FastEthernet0/0/1, changed state to
up[OK]
Router#
*Feb 17 09:38:05.835: %LINEPROTO-5-UPDOWN: Line protocol on Interface
FastEthernet0/0/0, changed state to up
*Feb 17 09:38:05.835: %LINEPROTO-5-UPDOWN: Line protocol on Interface
FastEthernet0/0/1, changed state to up
Router#
Router#
*Feb 17 09:38:10.879: %LINEPROTO-5-UPDOWN: Line protocol on Interface
FastEthernet0/0/0, changed state to down
*Feb 17 09:38:10.879: %LINEPROTO-5-UPDOWN: Line protocol on Interface
FastEthernet0/0/1, changed state to down
Router#
Router#
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#int gi
Router(config)#int gigabitEthernet 0/0-1#####################rgigabitEthernet 0/0-
1#####################agigabitEthernet 0/0-1#####################ngigabitEthernet
0/0-1#####################ggigabitEthernet 0/0-
1#####################egigabitEthernet 0/0-1##################### gigabitEthernet
0/0-1#####################
Router(config-if-range)#no shut
Router(config-if-range)#end
Router#wr
Building configuration...

*Feb 17 09:38:25.519: %SYS-5-CONFIG_I: Configured from console by console

*Feb 17 09:38:26.707: %LINK-3-UPDOWN: Interface GigabitEthernet0/0, changed state
to down
*Feb 17 09:38:26.783: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed state
to down[OK]
Router#
*Feb 17 09:38:29.827: %LINK-3-UPDOWN: Interface GigabitEthernet0/0, changed state
to up
*Feb 17 09:38:29.835: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed state
to up
*Feb 17 09:38:30.827: %LINEPROTO-5-UPDOWN: Line protocol on Interface
GigabitEthernet0/0, changed state to up
*Feb 17 09:38:30.835: %LINEPROTO-5-UPDOWN: Line protocol on Interface
GigabitEthernet0/1, changed state to up
*Feb 17 09:38:35.775: %LINEPROTO-5-UPDOWN: Line protocol on Interface
GigabitEthernet0/0, changed state to down
*Feb 17 09:38:35.775: %LINEPROTO-5-UPDOWN: Line protocol on Interface
GigabitEthernet0/1, changed state to down
*Feb 17 09:38:36.775: %LINK-3-UPDOWN: Interface GigabitEthernet0/0, changed state
to down
*Feb 17 09:38:36.775: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed state
to down
*Feb 17 09:38:37.467: %LINEPROTO-5-UPDOWN: Line protocol on Interface
FastEthernet0/0/1, changed state to up
*Feb 17 09:38:38.783: %LINK-3-UPDOWN: Interface GigabitEthernet0/0, changed state
to up
*Feb 17 09:38:39.783: %LINEPROTO-5-UPDOWN: Line protocol on Interface
GigabitEthernet0/0, changed state to up
System Bootstrap, Version 15.0(1r)M15, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2011 by cisco Systems, Inc.

Total memory size = 512 MB

CISCO1921/K9 platform with 524288 Kbytes of main memory
Main memory is configured to 64 bit mode with ECC disabled

Readonly ROMMON initialized

program load complete, entry point: 0x80903000, size: 0x4c4a0
program load complete, entry point: 0x80903000, size: 0x4c4a0

IOS Image Load Test

___________________
Digitally Signed Release Software
program load complete, entry point: 0x81000000, size: 0x34890b0
Self decompressing the image :
###################################################################################
###################################################################################
###################################################################################
##################################################################### [OK]
Smart Init is enabled
smart init is sizing iomem
TYPE MEMORY_REQ
Onboard devices &
buffer pools 0x01E8F000
-----------------------------------------------
TOTAL: 0x01E8F000

Rounded IOMEM up to: 32Mb.

Using 6 percent iomem. [32Mb/512Mb]

Restricted Rights Legend

Use, duplication, or disclosure by the Government is

subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

cisco Systems, Inc.

170 West Tasman Drive
San Jose, California 95134-1706

Cisco IOS Software, C1900 Software (C1900-UNIVERSALK9-M), Version 15.1(4)M4,

RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Tue 20-Mar-12 17:58 by prod_rel_team

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to

[email protected].

Cisco CISCO1921/K9 (revision 1.0) with 491520K/32768K bytes of memory.

Processor board ID FGL162121QM
2 Gigabit Ethernet interfaces
1 terminal line
DRAM configuration is 64 bits wide with parity disabled.
255K bytes of non-volatile configuration memory.
249840K bytes of USB Flash usbflash0 (Read/Write)

--- System Configuration Dialog ---

Would you like to enter the initial configuration dialog? [yes/no]: no#

Press RETURN to get started!

Jan 2 12:00:02.595: %IOS_LICENSE_IMAGE_APPLICATION-6-LICENSE_LEVEL: Module name =

c1900 Next reboot level = ipbasek9 and License = ipbasek9
Feb 17 11:30:39.243: %LINK-3-UPDOWN: Interface GigabitEthernet0/0, changed state to
up
Feb 17 11:30:39.243: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed state to
up
Feb 17 11:30:40.243: %LINEPROTO-5-UPDOWN: Line protocol on Interface
GigabitEthernet0/0, changed state to up
Feb 17 11:30:40.243: %LINEPROTO-5-UPDOWN: Line protocol on Interface
GigabitEthernet0/1, changed state to up
Feb 17 11:30:44.995: %USBFLASH-5-CHANGE: usbflash0 has been inserted!
Feb 17 11:30:46.979: %SYS-6-STARTUP_CONFIG_IGNORED: System startup configuration is
ignored based on the configuration register setting.
Feb 17 11:31:02.419: %LINK-5-CHANGED: Interface Embedded-Service-Engine0/0, changed
state to administratively down
Feb 17 11:31:02.419: %LINK-5-CHANGED: Interface GigabitEthernet0/0, changed state
to administratively down
Feb 17 11:31:02.419: %LINK-5-CHANGED: Interface GigabitEthernet0/1, changed state
to administratively down
Feb 17 11:31:03.459: %LINEPROTO-5-UPDOWN: Line protocol on Interface Embedded-
Service-Engine0/0, changed state to down
Feb 17 11:31:03.459: %LINEPROTO-5-UPDOWN: Line protocol on Interface
GigabitEthernet0/0, changed state to down
Feb 17 11:31:03.459: %LINEPROTO-5-UPDOWN: Line protocol on Interface
GigabitEthernet0/1, changed state to down
Feb 17 11:31:04.115: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C1900 Software (C1900-UNIVERSALK9-M), Version 15.1(4)M4,
RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Tue 20-Mar-12 17:58 by prod_rel_team
Feb 17 11:31:04.315: %SNMP-5-COLDSTART: SNMP agent on host Router is undergoing a
cold start
Router>
Router>
Router>
Router>